summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-06drm/amd/display: populate new dml variableDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Read VBIOS Golden Settings TblIgor Kravchenko
[Why] For ver.4.4 and higher VBIOS contains default setting table. {How] Read Golden Settings Table from VBIOS, apply Aux tuning parameters. Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use parameter for call to set output muxEric Bernstein
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: enable GFXOFF for navy_flounderJiansong Chen
Enable GFXOFF for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm amdgpu: Skip tmr load for SRIOVLiu ChengZhe
1. For Navi12, CHIP_SIENNA_CICHLID, skip tmr load operation; 2. Check pointer before release firmware. v2: use CHIP_SIENNA_CICHLID instead v3: remove local "bool ret"; fix grammer issue v4: use my name instead of "root" v5: fix grammer issue and indent issue Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: fix PSP autoload twice in FLRLiu ChengZhe
Assigning false to block->status.hw overwrites PSP's previous hardware status, which causes the PSP to Resume operation after hardware init. Remove this assignment and let the PSP execute Resume operation when it is told to. v2: Remove the braces. v3: Modify the description. Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: update GC golden setting for navy_flounderJiansong Chen
Update GC golden setting for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: update driver if version for navy_flounderJiansong Chen
It's in accordance with pmfw 65.5.0 for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: skip crit temperature values on APU (v2)Huang Rui
It doesn't expose PPTable descriptor on APU platform. So max/min temperature values cannot be got from APU platform. v2: Stoney needs to skip crit temperature as well. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Fix DP Compliance tests 4.3.2.1 and 4.3.2.2Aric Cyr
[Why] Test expects that we also read HPD_IRQ_VECTOR when checking for symbol loss as well lane status. [How] Read bytes 0x200-0x205 instead of just 0x202-0x205 Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use hw lock mgrWyatt Wood
[Why] Feature requires synchronization of dig, pipe, and cursor locking between driver and fw. [How] Set flag to force psr to use hw lock mgr. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: dchubbub p-state warning during surface planes switchhersen wu
[Why] ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk according to bandwidth requirement. call stack: rv1_update_clocks --> update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth --> prepare_bandwidth / optimize_bandwidth. before change dcn hw, prepare_bandwidth will be called first to allow enough clock, watermark for change, after end of dcn hw change, optimize_bandwidth is executed to lower clock to save power for new dcn hw settings. below is sequence of commit_planes_for_stream: step 1: prepare_bandwidth - raise clock to have enough bandwidth step 2: lock_doublebuffer_enable step 3: pipe_control_lock(true) - make dchubp register change will not take effect right way step 4: apply_ctx_for_surface - program dchubp step 5: pipe_control_lock(false) - dchubp register change take effect step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream for full_date, optimize clock to save power at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be changed for new dchubp configuration. but real dcn hub dchubps are still running with old configuration until end of step 5. this need clocks settings at step 1 should not less than that before step 1. this is checked by two conditions: 1. if (should_set_clock(safe_to_lower , new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) || new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz) 2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz the second condition is based on new dchubp configuration. dppclk for new dchubp may be different from dppclk before step 1. for example, before step 1, dchubps are as below: pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979) pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080) for dppclk for pipe0 need dppclk = dispclk new dchubp pipe split configuration: pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080) pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080) dppclk only needs dppclk = dispclk /2. dispclk, dppclk are not lock by otg master lock. they take effect after step 1. during this transition, dispclk are the same, but dppclk is changed to half of previous clock for old dchubp configuration between step 1 and step 6. This may cause p-state warning intermittently. [How] for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we need make sure dppclk are not changed to less between step 1 and 6. for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz, new display clock is raised, but we do not know ratio of new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz, new_clocks->dispclk_khz /2 does not guarantee equal or higher than old dppclk. we could ignore power saving different between dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6. as long as safe_to_lower = false, set dpclk = dispclk to simplify condition check. CC: Stable <stable@vger.kernel.org> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Allow asic specific FSFT timing optimizationReza Amini
[Why] Each asic can optimize best based on its capabilities [How] Optimizing timing for a new pixel clock Signed-off-by: Reza Amini <Reza.Amini@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Disable idle optimizations before programming DCNJun Lei
[Why] Programming DCN is explicitly forbidden during idle optimzations allowed state. Existing implemenation relies on OS/DM, which is not robust. Instead DC should sequence this. Note that DC will not re-enter idle optimized state on its own, it is only responsible for catching out of sequence calls. It is still DM responsibility to sequence appropriate for optimized power, but this change removes the requirement for DM to cover the .1% case. [How] - elevate updates during idle optimized state to full updates - disable idle power optimizations prior to programming Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Fix dmesg warning from setting abm levelStylon Wang
[Why] Setting abm level does not correctly update CRTC state. As a result no surface update is added to dc stream state and triggers warning. [How] Correctly update CRTC state when setting abm level property. CC: Stable <stable@vger.kernel.org> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use proper abm/backlight functions for DCN3Bhawanpreet Lakha
Use DCN21 functions instead of DCE110 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use seperate dmcub firmware for navy_flounderBhawanpreet Lakha
[Why] Currently navy_flounder is using sienna_cichlid_dmcub.bin. [How] Create a seperate define so navy_flounder will use its own firmware. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Check lane status again after link training doneMartin Tsai
[Why] Some monitors could suffer symbol unlock but cannot send HPD IRQ to notic source device to handle link loss. This makes monitor stuck in abnormal status and causes black screen. [How] According to the suggestion from scalar vendor, to check lane status again after link training done. That can improve the comaptibility from current production monitors. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Don't compare dppclk before updating DTOAlvin Lee
[Why] In dcn3_update_clocks there are situations where dppclk is not lowered (i.e. stays the same), but DTO still needs to be increased before we program pipe frontend (i.e. in prepare_bandwidth). If we don't program the new DTO value before we program the pipe, we will underflow as soon as the pipe lock is released until the next call to dcn3_update_clocks where the DTO is updated. [How] Remove dppclk check before programming new DTO value. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Fix naming of DSC Debugfs entryEryk Brol
[why] Fix naming and return bits rather than bytes per pixel for naming consistency. Because registers return Bytes per pixel, but DSC Config structure is expecting bits per pixel as input. So when returning the value convert from bytes into bits. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Rename bytes_pp to the correct bits_ppEryk Brol
[Why] Struct dcn_dsc_state is used for reading current state and parameters of DSC on a pipe, the target rate parameter uses bytes per pixel even though its reading BITS_PER_PIXEL register. [How] Changing it to Bits Per Pixel for consistency. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Clean up global sync param retrievalDmytro Laktyushkin
[Why] This change replaces older looping code in favor of these functions. [How] There are built in functions for extracting global sync params during mode validation now. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/swsmu: allow asic to handle sensor type by itselfKevin Wang
1. allow asic to handle sensor type by itself. 2. if not, use smu common sensor to handle it. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: off by one bugs in smu_cmn_to_asic_specific_index()Dan Carpenter
These tables have _COUNT number of elements so the comparisons should be >= instead of > to prevent reading one element beyond the end of the array. Fixes: 8264ee69f0d8 ("drm/amd/powerplay: drop unused code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: update driver if file for sienna_cichlidLikun Gao
Update sienna_cichlid driver if header and related files. Support new smu metrics for pre & postDS frequency. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: drop unnecessary message support check(v2)Changfeng
Take back patch:drop unnecessary message support check Because the gpu reset fail problem on renoir can be fixed by: drm/amd/powerplay: skip invalid msg when smu set mp1 state It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear code layer. Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: update dec ring test for VCN 3.0Boyuan Zhang
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu/jpeg3.0: remove extra asic type checkJames Zhu
jpeg ip block is already selected based on ASIC type during set_ip_blocks. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: update golden setting for sienna_cichlidLikun Gao
Update golden setting for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: correct smu message for vf modeLikun Gao
Set valid_in_vf to false for the message not support in vf mode on sienna cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add msg map for mode1 resetLikun Gao
Mapping Mode1Reset message for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: skip invalid msg when smu set mp1 stateLikun Gao
Some asic may not support for some message of set mp1 state. If the return value of smu_send_smc_msg is -EINVAL, that means it failed to send msg to smc as it can not map an valid message for the ASIC. And with that case, smu_set_mp1_state should be skipped as those ASIC was in fact do not support for that. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: remove the dpm checking in the boot sequenceKenneth Feng
It's not necessary to retrieve the power features status when the asic is booted up the first time. This patch can have the features enablement status still checked in suspend/resume case and removed from the first boot up sequence. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06Revert "drm/amd/powerplay: drop unnecessary message support check"Changfeng
The below 3 messages are not supported on Renoir SMU_MSG_PrepareMp1ForShutdown SMU_MSG_PrepareMp1ForUnload SMU_MSG_PrepareMp1ForReset It needs to revert patch: drm/amd/powerplay: drop unnecessary message support check to avoid set mp1 state fail during gpu reset on renoir. Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: add printing after executing page reservation to eepromGuchun Chen
This will tell users if the faulty page has been written to external eeprom device in dmesg log. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: expand sienna chichlid reg access supportJohn Clements
Added dedicated 64bit reg read/write support Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: fix spelling mistake "Falied" -> "Failed"Colin Ian King
There is a spelling mistake in a DRM_ERROR error message. Fix it. This got lost in a merge, restore the fix. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4afaa61db9cf5250b5734c2531b226e7b3a3d691)
2020-08-05Merge tag 'drm-msm-next-2020-07-30' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Take 2 of msm-next pull, this version drops the OPP patch due to [1], so I'll send the gpu opp/bw scaling patch after the OPP patch lands. Since I had to force-push I took the opportunity to rebase on drm-next, and since you already merged in 5.8-rc6 a few fixes from the last cycle dropped out. This time around: * A bunch more a650/a640 (sm8150/sm8250) display and GPU enablement and fixes * Enable dpu dither block for 6bpc panels * dpu suspend fixes * dpu fix for cursor on 2nd display * dsi/mdp5 enablement for sdm630/sdm636/sdm660 I also regenerated the register headers, which accounts for a good bit of the size this time, because we hadn't re-synced the register headers since the early days of a6xx bringup. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGs_eswoX-E0Ddg5DoEQy35x3GG+6SDXUAjPMrtAWFkqng@mail.gmail.com
2020-08-04drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpiXin Xiong
drm_dp_mst_allocate_vcpi() invokes drm_dp_mst_topology_get_port_validated(), which increases the refcount of the "port". These reference counting issues take place in two exception handling paths separately. Either when “slots” is less than 0 or when drm_dp_init_vcpi() returns a negative value, the function forgets to reduce the refcnt increased drm_dp_mst_topology_get_port_validated(), which results in a refcount leak. Fix these issues by pulling up the error handling when "slots" is less than 0, and calling drm_dp_mst_topology_put_port() before termination when drm_dp_init_vcpi() returns a negative value. Fixes: 1e797f556c61 ("drm/dp: Split drm_dp_mst_allocate_vcpi") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine
2020-08-04drm: Added orientation quirk for ASUS tablet model T103HAFMarius Iacob
Signed-off-by: Marius Iacob <themariusus@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200801123445.1514567-1-themariusus@gmail.com
2020-08-04drm/omap: force runtime PM suspend on system suspendTomi Valkeinen
Use SET_LATE_SYSTEM_SLEEP_PM_OPS in DSS submodules to force runtime PM suspend and resume. We use suspend late version so that omapdrm's system suspend callback is called first, as that will disable all the display outputs after which it's safe to force DSS into suspend. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200618095153.611071-1-tomi.valkeinen@ti.com Acked-by: Tony Lindgren <tony@atomide.com> Fixes: cef766300353 ("drm/omap: Prepare DSS for probing without legacy platform data") Cc: stable@vger.kernel.org # v5.7+ Tested-by: Tony Lindgren <tony@atomide.com>
2020-08-04drm/tidss: fix modeset init for DPI panelsTomi Valkeinen
The connector type for DISPC's DPI videoport was set the LVDS instead of DPI. This causes any DPI panel setup to fail with tidss, making all DPI panels unusable. Fix this by using correct connector type. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Fixes: 32a1795f57eecc39749017 ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org # v5.7+ Link: https://patchwork.freedesktop.org/patch/msgid/20200604080214.107159-1-tomi.valkeinen@ti.com Reviewed-by: Jyri Sarha <jsarha@ti.com>
2020-08-04fbmem: pull fbcon_update_vcs() out of fb_set_var()Tetsuo Handa
syzbot is reporting OOB read bug in vc_do_resize() [1] caused by memcpy() based on outdated old_{rows,row_size} values, for resize_screen() can recurse into vc_do_resize() which changes vc->vc_{cols,rows} that outdates old_{rows,row_size} values which were saved before calling resize_screen(). Daniel Vetter explained that resize_screen() should not recurse into fbcon_update_vcs() path due to FBINFO_MISC_USEREVENT being still set when calling resize_screen(). Instead of masking FBINFO_MISC_USEREVENT before calling fbcon_update_vcs(), we can remove FBINFO_MISC_USEREVENT by calling fbcon_update_vcs() only if fb_set_var() returned 0. This change assumes that it is harmless to call fbcon_update_vcs() when fb_set_var() returned 0 without reaching fb_notifier_call_chain(). [1] https://syzkaller.appspot.com/bug?id=c70c88cfd16dcf6e1d3c7f0ab8648b3144b5b25e Reported-and-tested-by: syzbot <syzbot+c37a14770d51a085a520@syzkaller.appspotmail.com> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: kernel test robot <lkp@intel.com> for missing #include Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/075b7e37-3278-cd7d-31ab-c5073cfa8e92@i-love.sakura.ne.jp
2020-08-02Linux 5.8v5.8Linus Torvalds
2020-08-02Merge tag 'x86-urgent-2020-08-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "A single fix for a potential deadlock when printing a message about spurious interrupts" * tag 'x86-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/i8259: Use printk_deferred() to prevent deadlock
2020-08-02Merge tag 'kbuild-fixes-v5.8-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - clean the generated moc file for xconfig - fix xconfig bugs, and revert some bad commits * tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove redundant FORCE definition in scripts/Makefile.modpost kconfig: qconf: remove wrong ConfigList::firstChild() Revert "kconfig: qconf: don't show goback button on splitMode" Revert "kconfig: qconf: Change title for the item window" kconfig: qconf: remove "goBack" debug message kconfig: qconf: use delete[] instead of delete to free array kconfig: qconf: compile moc object separately kconfig: qconf: use if_changed for qconf.moc rule modpost: explain why we can't use strsep
2020-08-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Bugfixes and strengthening the validity checks on inputs from new userspace APIs. Now I know why I shouldn't prepare pull requests on the weekend, it's hard to concentrate if your son is shouting about his latest Minecraft builds in your ear. Fortunately all the patches were ready and I just had to check the test results..." * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVM KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled KVM: arm64: Don't inherit exec permission across page-table levels KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functions KVM: nVMX: check for invalid hdr.vmx.flags KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE selftests: kvm: do not set guest mode flag
2020-08-02kbuild: remove redundant FORCE definition in scripts/Makefile.modpostMasahiro Yamada
The same code exists a few lines above. Fixes: 436b2ac603d5 ("modpost: invoke modpost only when input files are updated") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-02kconfig: qconf: remove wrong ConfigList::firstChild()Masahiro Yamada
This function returns the first child object, but the returned pointer is not compatible with (ConfigItem *). Commit cc1c08edccaf ("kconfig: qconf: don't show goback button on splitMode") uncovered this issue because using the pointer from this function would make qconf crash. (https://lkml.org/lkml/2020/7/18/411) This function does not work. Remove. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca. 2) Better parameter validation in pfkey_dump(), from Mark Salyzyn. 3) Fix several clang issues on powerpc in selftests, from Tanner Love. 4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al Viro. 5) Out of bounds access in mlx5e driver, from Raed Salem. 6) Fix transfer buffer memleak in lan78xx, from Johan Havold. 7) RCU fixups in rhashtable, from Herbert Xu. 8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang. 9) vxlan FDB dump must be done under RCU, from Ido Schimmel. 10) Fix use after free in mlxsw, from Ido Schimmel. 11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko. 12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar Thiagarajan. 13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang. 14) Fix bpf program reference count leaks in mlx5 during mlx5e_alloc_rq(), from Xin Xiong. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits) vxlan: fix memleak of fdb rds: Prevent kernel-infoleak in rds_notify_queue_get() net/sched: The error lable position is corrected in ct_init_module net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq net/mlx5e: E-Switch, Specify flow_source for rule with no in_port net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring net/mlx5e: CT: Support restore ipv6 tunnel net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe() ionic: unlock queue mutex in error path atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent net: ethernet: mtk_eth_soc: fix MTU warnings net: nixge: fix potential memory leak in nixge_probe() devlink: ignore -EOPNOTSUPP errors on dumpit rxrpc: Fix race between recvmsg and sendmsg on immediate call failure MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer selftests/bpf: fix netdevsim trap_flow_action_cookie read ipv6: fix memory leaks on IPV6_ADDRFORM path net/bpfilter: Initialize pos in __bpfilter_process_sockopt igb: reinit_locked() should be called with rtnl_lock e1000e: continue to init PHY even when failed to disable ULP ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 11:39:13 +0000