summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-04-17gpio: blzp1600: drop dependency on OF headersBartosz Golaszewski
Use the generic boolean device property getter instead of the OF-specific variant. This allows us to stop pulling in linux/of.h. While at it: drop the of_irq.h inclusion as none of its symbols are used in this driver. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com> Link: https://lore.kernel.org/r/20250408143629.125576-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-17gpio: ds4520: don't check the 'ngpios' property in the driverBartosz Golaszewski
This is already done by the gpio-regmap abstraction by calling gpiochip_get_ngpios(). We don't need to do this at the driver level. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250408-gpio-regmap-ngpios-v2-1-26f254014f57@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-17gpio: ich: use new line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-12-78399683ca38@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-17gpio: ich: enable building with COMPILE_TEST=yBartosz Golaszewski
Extend the build coverage by allowing to build the module with COMPILE_TEST enabled. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-11-78399683ca38@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-17gpio: htc-egpio: use new line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-10-78399683ca38@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-17gpio: htc-egpio: enable building with COMPILE_TEST=yBartosz Golaszewski
Extend the build coverage by allowing to build the module with COMPILE_TEST enabled. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-9-78399683ca38@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-17gpio: gw-pld: use new line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-8-78399683ca38@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-17gpio: graniterapids: use new line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-7-78399683ca38@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-17gpio: f7188: use new line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-6-78399683ca38@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-16gpio: exar: use new line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-4-78399683ca38@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-16gpio: em: use new line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-3-78399683ca38@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-16gpio: eic-sprd: use new line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-2-78399683ca38@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-16gpio: dln2: use new line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-1-78399683ca38@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-14gpio: GPIO_BLZP1600 should depend on ARCH_BLAIZEGeert Uytterhoeven
The Blaize BLZP1600 GPIO controller is only present on BLaize BLZP1600 SoCs. Hence add a dependency on ARCH_BLAIZE, to prevent asking the user about this driver when configuring a kernel without Blaize platform support. Fixes: 602ae04f56542d8e ("gpio: Enable Blaize BLZP1600 GPIO support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com> Link: https://lore.kernel.org/r/a75af4b623579a193b4a59350c063969aabb5b71.1744190524.git.geert+renesas@glider.be Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-14selftests: gpio: gpio-aggregator: add a test case for _sysfs prefix reservationKoichiro Den
The kernel doc for gpio-aggregator configfs interface, which was recently added, states that users should not be able to create an aggregator with a name prefixed by "_sysfs" via configfs. However, it was found that this guard does not function as expected (thanks to Dan Carpenter for identifying and fixing the issue). Add a test case to verify the guard. Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250412150119.1461023-1-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-14gpio: aggregator: Fix leak in gpio_aggregator_parse()Dan Carpenter
Call gpio_aggregator_free_lines() before returning on this error path. Fixes: 83c8e3df642f ("gpio: aggregator: expose aggregator created via legacy sysfs to configfs") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/e023bfe52509ce1bef6209ec7c47e99279c551dd.1744452787.git.dan.carpenter@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-14gpio: aggregator: Fix error code in gpio_aggregator_activate()Dan Carpenter
Propagate the error code if gpio_aggregator_make_device_sw_node() fails. Don't return success. Fixes: 86f162e73d2d ("gpio: aggregator: introduce basic configfs interface") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/79b804a0769a434698616bebedacc0e5d5605fdc.1744452787.git.dan.carpenter@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-14gpio: aggregator: Return an error if there are no GPIOs in ↵Dan Carpenter
gpio_aggregator_parse() The error handling in gpio_aggregator_parse() was re-written. It now returns success if there are no GPIOs. Restore the previous behavior and return -EINVAL instead. Fixes: 83c8e3df642f ("gpio: aggregator: expose aggregator created via legacy sysfs to configfs") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/9dcd5fda7a3819e896d9eee4156e7c46c9a64595.1744452787.git.dan.carpenter@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-14gpio: aggregator: Fix gpio_aggregator_line_alloc() checkingDan Carpenter
The gpio_aggregator_line_alloc() function returns error pointers, but the callers check for NULL. Update the error checking in the callers. Fixes: 83c8e3df642f ("gpio: aggregator: expose aggregator created via legacy sysfs to configfs") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/cc71d8cf6e9bb4bb8cd9ae5050100081891d9345.1744452787.git.dan.carpenter@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-14gpio: aggregator: fix "_sysfs" prefix check in gpio_aggregator_make_group()Dan Carpenter
This code is intended to reject strings that start with "_sysfs" but the strcmp() limit is wrong so checks the whole string instead of the prefix. Fixes: 83c8e3df642f ("gpio: aggregator: expose aggregator created via legacy sysfs to configfs") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/30210ed77b40b4b6629de659cb56b9ec7832c447.1744452787.git.dan.carpenter@linaro.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2025-04-09selftests: gpio: add test cases for gpio-aggregatorKoichiro Den
Add a set of tests for gpio-aggregator module. This test covers both pre-existing new_device/delete_device interface and new configfs-based interface. Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250407043019.4105613-10-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-09Documentation: gpio: document configfs interface for gpio-aggregatorKoichiro Den
Add documentation for the newly added configfs-based interface for GPIO aggregator. Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250407043019.4105613-9-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-09gpio: aggregator: cancel deferred probe for devices created via configfsKoichiro Den
For aggregators initialized via configfs, write 1 to 'live' waits for probe completion and returns an error if the probe fails, unlike the legacy sysfs interface, which is asynchronous. Since users control the liveness of the aggregator device and might be editing configurations while 'live' is 0, deferred probing is both unnatural and unsafe. Cancel deferred probe for purely configfs-based aggregators when probe fails. Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250407043019.4105613-8-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-09gpio: aggregator: expose aggregator created via legacy sysfs to configfsKoichiro Den
Expose settings for aggregators created using the sysfs 'new_device' interface to configfs. Once written to 'new_device', an "_sysfs.<N>" path appears in the configfs regardless of whether the probe succeeds. Consequently, users can no longer use that prefix for custom GPIO aggregator names. The 'live' attribute changes to 1 when the probe succeeds and the GPIO forwarder is instantiated. Note that the aggregator device created via sysfs is asynchronous, i.e. writing into 'new_device' returns without waiting for probe completion, and the probe may succeed, fail, or eventually succeed via deferred probe. Thus, the 'live' attribute may change from 0 to 1 asynchronously without notice. So, editing key/offset/name while it's waiting for deferred probe is prohibited. The configfs auto-generation relies on create_default_group(), which inherently prohibits rmdir(2). To align with the limitation, this commit also prohibits mkdir(2) for them. When users want to change the number of lines for an aggregator initialized via 'new_device', they need to tear down the device using 'delete_device' and reconfigure it from scratch. This does not break previous behavior; users of legacy sysfs interface simply gain additional almost read-only configfs exposure. Still, users can write to the 'live' attribute to toggle the device unless it's waiting for deferred probe. So once probe succeeds, they can deactivate it in the same manner as the devices initialized via configfs. Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250407043019.4105613-7-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-09gpio: aggregator: rename 'name' to 'key' in gpio_aggregator_parse()Koichiro Den
Rename the local variable 'name' in gpio_aggregator_parse() to 'key' because struct gpio_aggregator_line now uses the 'name' field for the custom line name and the local variable actually represents a 'key'. This change prepares for the next but one commit. No functional change. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250407043019.4105613-6-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-09gpio: aggregator: introduce basic configfs interfaceKoichiro Den
The existing sysfs 'new_device' interface has several limitations: * No way to determine when GPIO aggregator creation is complete. * No way to retrieve errors when creating a GPIO aggregator. * No way to trace a GPIO line of an aggregator back to its corresponding physical device. * The 'new_device' echo does not indicate which virtual gpiochip<N> was created. * No way to assign names to GPIO lines exported through an aggregator. Introduce the new configfs interface for gpio-aggregator to address these limitations. It provides a more streamlined, modern, and extensible configuration method. For backward compatibility, the 'new_device' interface and its behavior is retained for now. This commit implements basic functionalities: /config/gpio-aggregator/<name-of-your-choice>/ /config/gpio-aggregator/<name-of-your-choice>/live /config/gpio-aggregator/<name-of-your-choice>/dev_name /config/gpio-aggregator/<name-of-your-choice>/<lineY>/ /config/gpio-aggregator/<name-of-your-choice>/<lineY>/key /config/gpio-aggregator/<name-of-your-choice>/<lineY>/offset /config/gpio-aggregator/<name-of-your-choice>/<lineY>/name Basic setup flow is: 1. Create a directory for a GPIO aggregator. 2. Create subdirectories for each line you want to instantiate. 3. In each line directory, configure the key and offset. The key/offset semantics are as follows: * If offset is >= 0: - key specifies the name of the chip this GPIO belongs to - offset specifies the line offset within that chip. * If offset is <0: - key needs to specify the GPIO line name. 4. Return to the aggregator's root directory and write '1' to the live attribute. For example, the command in the existing kernel doc: echo 'e6052000.gpio 19 e6050000.gpio 20-21' > new_device is equivalent to: mkdir /sys/kernel/config/gpio-aggregator/<custom-name> # Change <custom-name> to name of your choice (e.g. "aggr0") cd /sys/kernel/config/gpio-aggregator/<custom-name> mkdir line0 line1 line2 # Only "line<Y>" naming allowed. echo e6052000.gpio > line0/key echo 19 > line0/offset echo e6050000.gpio > line1/key echo 20 > line1/offset echo e6050000.gpio > line2/key echo 21 > line2/offset echo 1 > live The corresponding gpio_device id can be identified as follows: cd /sys/kernel/config/gpio-aggregator/<custom-name> ls -d /sys/devices/platform/`cat dev_name`/gpiochip* Also, via configfs, custom GPIO line name can be set like this: cd /sys/kernel/config/gpio-aggregator/<custom-name> echo "abc" > line1/name Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250407043019.4105613-5-koichiro.den@canonical.com [Bartosz: remove stray newlines] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-09gpio: aggregator: add gpio_aggregator_{alloc,free}()Koichiro Den
Prepare for the upcoming configfs interface. These functions will be used by both the existing sysfs interface and the new configfs interface, reducing code duplication. No functional change. Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250407043019.4105613-4-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-09gpio: aggregator: unify function namingKoichiro Den
Unify function names to use gpio_aggregator_ prefix (except GPIO forwarder implementations, which remain unchanged in subsequent commits). While at it, rename the pre-existing gpio_aggregator_free() to gpio_aggregator_destory(), since that name will be used by new alloc/free functions introduced in the next commit, for which the name is more appropriate. No functional change. Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250407043019.4105613-3-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-09gpio: aggregator: reorder functions to prepare for configfs introductionKoichiro Den
Reorder functions in drivers/gpio/gpio-aggregator.c to prepare for the configfs-based interface additions in subsequent commits. Arrange the code so that the configfs implementations will appear above the existing sysfs-specific code, since the latter will partly depend on the configfs interface implementations when it starts to expose the settings to configfs. The order in drivers/gpio/gpio-aggregator.c will be as follows: * Basic gpio_aggregator/gpio_aggregator_line representations * Common utility functions * GPIO Forwarder implementations * Configfs interface implementations * Sysfs interface implementations * Platform device implementations * Module init/exit implementations This separate commit ensures a clean diff for the subsequent commits. No functional change. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Link: https://lore.kernel.org/r/20250407043019.4105613-2-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-09Merge tag 'gpiod-is-equal-for-v6.16-rc1' of ↵Bartosz Golaszewski
gitolite.kernel.org:pub/scm/linux/kernel/git/brgl/linux into gpio/for-next Immutable tag for the regulator tree to pull from gpio: provide gpiod_is_equal()
2025-04-09gpio: provide gpiod_is_equal()Bartosz Golaszewski
There are users in the kernel that directly compare raw GPIO descriptor pointers in order to determine whether they refer to the same physical GPIO pin. This accidentally works like this but is not guaranteed by any API contract. Let's provide a comparator function that hides the actual logic. Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250407-gpiod-is-equal-v1-1-7d85f568ae6e@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-08gpiolib: support parsing gpio three-cell interrupts schemeYixun Lan
gpio irq which using three-cell scheme should always call instance_match() function to find the correct irqdomain. The select() function will be called with !DOMAIN_BUS_ANY, so for specific gpio irq driver, it need to set bus token explicitly, something like: irq_domain_update_bus_token(girq->domain, DOMAIN_BUS_WIRED); Signed-off-by: Yixun Lan <dlan@gentoo.org> Link: https://lore.kernel.org/r/20250408-04-gpio-irq-threecell-v4-1-fd170d5e2d2b@gentoo.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-08Merge tag 'irqdomain-04-08-25' of ↵Bartosz Golaszewski
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into gpio/for-next Stable tag for the GPIO tree to pull from
2025-04-07gpio: Enable Blaize BLZP1600 GPIO supportNikolaos Pasaloukos
Blaize BLZP1600 GPIO controller is provided by VeriSilicon Microelectronics based on the GPIO APB v0.2 design. It has 32 input/output ports which can be configured as edge or level triggered interrupts. It also provides a de-bounce feature. This controller is used on the Blaize BLZP1600 SoC. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com> Link: https://lore.kernel.org/r/20250327-kernel-upstreaming-add_gpio_support-v2-2-bbe51f8d66da@blaize.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-07dt-bindings: Document Blaize BLZP1600 GPIO driverNikolaos Pasaloukos
This is a custom silicon GPIO driver provided by VeriSilicon Microelectronics. It has 32 input/output ports which can be configured as edge or level triggered interrupts. It also provides a de-bounce feature. This controller is used on the Blaize BLZP1600 SoC. Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250327-kernel-upstreaming-add_gpio_support-v2-1-bbe51f8d66da@blaize.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-07dt-bindings: gpio: pca95xx: add Toradex ecgpiol16Emanuele Ghidoli
The Toradex ecgpiol16 is a 16-bit I2C I/O expander implemented using a small MCU. Its register interface and behavior are compatible with the PCAL6416. Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250331072644.17921-1-francesco@dolcini.it Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-07dt-bindings: gpio: Correct indentation and style in DTS exampleKrzysztof Kozlowski
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. While re-indenting, drop unused labels. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Sander Vanheule <sander@svanheule.net> Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20250324125326.82270-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-07Merge tag 'gpio-s5m8767-polarity-quirk-for-v6.16-rc1' into gpio/for-nextBartosz Golaszewski
gpiolib: of: Add polarity quirk for s5m8767
2025-04-07irqdomain: Support three-cell scheme interruptsYixun Lan
Add new function *_twothreecell() to extend support to parse three-cell interrupts which encoded as <instance hwirq irqflag>, the translate function will retrieve irq number and flag from last two cells. This API will be used in gpio irq driver which need to work with two or three cells cases. Signed-off-by: Yixun Lan <dlan@gentoo.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250326-04-gpio-irq-threecell-v3-1-aab006ab0e00@gentoo.org
2025-04-07gpiolib: of: Add polarity quirk for s5m8767Peng Fan
This is prepare patch for switching s5m8767 regulator driver to use GPIO descriptor. DTS for exynos5250 spring incorrectly specifies "active low" polarity for the DVS and DS line. But per datasheet, they are actually active high. So add polarity quirk for it. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250327004945.563765-1-peng.fan@oss.nxp.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-07gpiolib: don't allow setting values on input linesBartosz Golaszewski
Some drivers as well as the character device and sysfs code check whether the line actually is in output mode before allowing the user to set a value. However, GPIO value setters now return integer values and can indicate failures. This allows us to move these checks into the core code. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20250311-gpio-set-check-output-v1-1-d971bca9e6fa@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-04-06Linux 6.15-rc1v6.15-rc1Linus Torvalds
2025-04-06tools/include: make uapi/linux/types.h usable from assemblyThomas Weißschuh
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when included from assembly code. Mirror this behaviour in the tools/ variant. Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the toolchain automatically. Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/ Fixes: c9fbaa879508 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-04-06Merge tag 'turbostat-2025.05.06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - support up to 8192 processors - add cpuidle governor debug telemetry, disabled by default - update default output to exclude cpuidle invocation counts - bug fixes * tag 'turbostat-2025.05.06' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: v2025.05.06 tools/power turbostat: disable "cpuidle" invocation counters, by default tools/power turbostat: re-factor sysfs code tools/power turbostat: Restore GFX sysfs fflush() call tools/power turbostat: Document GNR UncMHz domain convention tools/power turbostat: report CoreThr per measurement interval tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192 tools/power turbostat: Add idle governor statistics reporting tools/power turbostat: Fix names matching tools/power turbostat: Allow Zero return value for some RAPL registers tools/power turbostat: Clustered Uncore MHz counters should honor show/hide options
2025-04-06Merge tag 'soundwire-6.15-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fix from Vinod Koul: - add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT * tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
2025-04-06tools/power turbostat: v2025.05.06Len Brown
Support up to 8192 processors Add cpuidle governor debug telemetry, disabled by default Update default output to exclude cpuidle invocation counts Bug fixes Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: disable "cpuidle" invocation counters, by defaultLen Brown
Create "pct_idle" counter group, the sofware notion of residency so it can now be singled out, independent of other counter groups. Create "cpuidle" group, the cpuidle invocation counts. Disable "cpuidle", by default. Create "swidle" = "cpuidle" + "pct_idle". Undocument "sysfs", the old name for "swidle", but keep it working for backwards compatibilty. Create "hwidle", all the HW idle counters Modify "idle", enabled by default "idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle") Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06Merge tag 'perf-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Ingo Molnar: "Fix a perf events time accounting bug" * tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix child_total_time_enabled accounting bug at task exit
2025-04-06Merge tag 'sched-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: - Fix a nonsensical Kconfig combination - Remove an unnecessary rseq-notification * tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq: Eliminate useless task_work on execve sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
2025-04-06Disable SLUB_TINY for build testingLinus Torvalds
... and don't error out so hard on missing module descriptions. Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") we used to warn about missing module descriptions, but only when building with extra warnigns (ie 'W=1'). After that commit the warning became an unconditional hard error. And it turns out not all modules have been converted despite the claims to the contrary. As reported by Damian Tometzki, the slub KUnit test didn't have a module description, and apparently nobody ever really noticed. The reason nobody noticed seems to be that the slub KUnit tests get disabled by SLUB_TINY, which also ends up disabling a lot of other code, both in tests and in slub itself. And so anybody doing full build tests didn't actually see this failre. So let's disable SLUB_TINY for build-only tests, since it clearly ends up limiting build coverage. Also turn the missing module descriptions error back into a warning, but let's keep it around for non-'W=1' builds. Reported-by: Damian Tometzki <damian@riscv-rocks.de> Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/ Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 23:16:14 +0000