| Age | Commit message (Collapse) | Author |
|---|
|
To fit the latest 78.53 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We have 2 back-to-back checks for skipping connectors.
Logically one of them will do the job.
[How]
Remove redundant check.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Adding log for clock table from SMU helps with the debugging process.
Implemented using DC_LOG_SMU to output log.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
Uncomment scaling cmd assignment since
FW headers are now promoted.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Sometimes pixel clock needs to remain active after transmitter disable.
[How]
Use update_phy_state to track PHY state after stream
enable/disable and program pixel clock as needed.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
Refcount is incremented on allocation and
when adding to the context. Therefore we must
release the phantom plane and stream after
removing from the context.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
When using IGT, kms_bw multi display tests trigger an assert since
we ignore virtual signal type. k1/k2 dividers should be correctly
programmed if VSYNC needs to be correct. Add the appropriate condition
to the if arm to fix this.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The DAL driver may transmit the wrong cursor position to PSRSU
DMUB driver when there are multiple planes.
[How]
Currently the driver apply the HW cursor on the top plane. So we
should only transmit the cursor position on the top plane to
PSRSU DMUB driver.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DC was using compile time initialization of register addresses using
SR_* macros and their variants. These have been converted to use runtime
initialization.
The REG_STRUCT macro is a definition that is added to SR_* macros.
During initialization, this must be defined before SR_* macros are
invoked, which are in turn invoked through various IP initialization macros.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DC was using compile time initialization of register addresses using
SR_* macros and their variants. These have been converted to use runtime
initialization.
The REG_STRUCT macro is a definition that is added to SR_* macros.
During initialization, this must be defined before SR_* macros are
invoked, which are in turn invoked through various IP initialization macros.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Retrying on receiving a NACK can result in long overall EDID read times
in some cases.
[How]
Retry only on DEFER and return immediately on NACK.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Reprogramming the stream despite no changes in ODM combine mode.
Reprogramming the stream would cause intermittent black screen on
display which could only be recovered through enable/disable sequence.
[HOW]
Fixed bug where we detected a change in ODM combine mode despite ODM
combine mode being disabled. Also removed code which required stream to
be reprogrammed once a change in ODM combine mode was noticed. Lastly we
do not support dynamic ODM switching for HDMI TMDS and FRL on DCN32,
therefore we never want to change its ODM policy.
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
modes
[Why]
odm 2:1 policy is splitting the pipes in 4k144.
then in subvp code, we merge the pipes. but since the
configuration is unsupported, we keep the pipes split
[How]
for unsupported subvp configuration, redo the dml and
pipe split calls
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
RV2 do not change pipe split policy in the
minimal pipe split transition state.
This will unblock mode support on some
parts that limit to DPM0 for power reason.
[How]
Do not change pipe split policy in the
minimal pipe split transition state to
allow 4k multi display configs to be
supported at DPM0.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This verion brings along following fixes:
-Add scaling factor for SubVP
-Modify stop_dbg_mode return value
-Add gfx_off members and document
-Add GFXOFF function for vangogh
-Add GFXOFF stats to debug
-Fix codestyle problems
-Fix overflow on MIN_I64
-Fix Unneeded semicolon
-Fix comment typo
-Remove useless condition in amdgpu_job_stop_all_jobs_on_sched()
-Add decoder_iv_ts helper for ih_v6
-Add chip version to DCN32
-Avoid doing vm_init multiple time
-Modify size calculation in MALL
-Fix DSC for phantom pipes
-Update clock table policy for DCN314
-Modify header inclusion pattern
-Fix plug/unplug external monitor will playback MPO video
-Add debug parameter to retain default clock table
-Increase tlb flush timeout for sriov
-Fix compare intergers of different widths
-Add reserved dc_log_type
-Fix pixel clock programming
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- For SubVP add scaling factor to allow firmware to calculate
accurate line to start programming
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Skip set_topology_info as xgmi TA will now block it
and host needs to program it.
Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-By : Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For some ASICs, like GFX IP v11.0.1, only have one SDMA instance,
so not need to configure SDMA1_RLC_CGCG_CTRL for this case.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When VIRTGPU_EXECBUF_RING_IDX is used, we should be considering the
timeline that the EB if running on rather than the global driver fence
context.
Fixes: 85c83ea915ed ("drm/virtio: implement context init: allocate an array of fence contexts")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20220812224001.2806463-1-robdclark@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
When userspace tries to map the dmabuf and if for some reason
(e.g. OOM) the creation of the sg table fails, ubuf->sg needs to be
set to NULL. Otherwise, when the userspace subsequently closes the
dmabuf fd, we'd try to erroneously free the invalid sg table from
release_udmabuf resulting in the following crash reported by syzbot:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 3609 Comm: syz-executor487 Not tainted
5.19.0-syzkaller-13930-g7ebfc85e2cd7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 07/22/2022
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114
Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 04 00 00 48 8d 7d 0c 4c
8b 63 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14
02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 e2
RSP: 0018:ffffc900037efd30 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffffff8cb67800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff84ad27e0 RDI: 0000000000000000
RBP: fffffffffffffff4 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 000000000008c07c R12: ffff88801fa05000
R13: ffff888073db07e8 R14: ffff888025c25440 R15: 0000000000000000
FS: 0000555555fc4300(0000) GS:ffff8880b9a00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc1c0ce06e4 CR3: 00000000715e6000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
dma_buf_release+0x157/0x2d0 drivers/dma-buf/dma-buf.c:78
__dentry_kill+0x42b/0x640 fs/dcache.c:612
dentry_kill fs/dcache.c:733 [inline]
dput+0x806/0xdb0 fs/dcache.c:913
__fput+0x39c/0x9d0 fs/file_table.c:333
task_work_run+0xdd/0x1a0 kernel/task_work.c:177
ptrace_notify+0x114/0x140 kernel/signal.c:2353
ptrace_report_syscall include/linux/ptrace.h:420 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:482 [inline]
syscall_exit_work kernel/entry/common.c:249 [inline]
syscall_exit_to_user_mode_prepare+0x129/0x280 kernel/entry/common.c:276
__syscall_exit_to_user_mode_work kernel/entry/common.c:281 [inline]
syscall_exit_to_user_mode+0x9/0x50 kernel/entry/common.c:294
do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fc1c0c35b6b
Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24
0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44
RSP: 002b:00007ffd78a06090 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00007fc1c0c35b6b
RDX: 0000000020000280 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 0000000000000007 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000000c
R13: 0000000000000003 R14: 00007fc1c0cfe4a0 R15: 00007ffd78a06140
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114
Reported-by: syzbot+c80e9ef5d8bb45894db0@syzkaller.appspotmail.com
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220825063522.801264-1-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
In vc4_hvs_dump_state() potentially freed resources are protected from
being accessed with drm_dev_enter()/drm_dev_exit().
Also include drm_print_regset32() in the protected section, since
drm_print_regset32() does access memory that is typically mapped via
devm_* calls.
Fixes: 969cfae1f01d ("drm/vc4: hvs: Protect device resources after removal")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-5-dakr@redhat.com
|
|
(Hardware) resources which are bound to the driver and device lifecycle
must not be accessed after the device and driver are unbound.
However, the DRM device isn't freed as long as the last user closed it,
hence userspace can still call into the driver.
Therefore protect the critical sections which are accessing those
resources with drm_dev_enter() and drm_dev_exit().
Fixes: 7cc4214c27cf ("drm/vc4: crtc: Switch to drmm_kzalloc")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-4-dakr@redhat.com
|
|
(Hardware) resources which are bound to the driver and device lifecycle
must not be accessed after the device and driver are unbound.
However, the DRM device isn't freed as long as the last user closed it,
hence userspace can still call into the driver.
Therefore protect the critical sections which are accessing those
resources with drm_dev_enter() and drm_dev_exit().
Fixes: 9872c7a31921 ("drm/vc4: plane: Switch to drmm_universal_plane_alloc()")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-3-dakr@redhat.com
|
|
In vc4_hdmi_encoder_{pre,post}_crtc_enable() commit cd00ed5187bf
("drm/vc4: hdmi: Protect device resources after removal") missed to
unlock the mutex before returning due to drm_dev_enter() indicating the
device being unplugged.
Fixes: cd00ed5187bf ("drm/vc4: hdmi: Protect device resources after removal")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-2-dakr@redhat.com
|
|
Host Turbo operates at efficient frequency when GT is not idle unless
the user or workload has forced it to a higher level. Replicate the same
behavior in SLPC by allowing the algorithm to use efficient frequency.
We had disabled it during boot due to concerns that it might break
kernel ABI for min frequency. However, this is not the case since
SLPC will still abide by the (min,max) range limits.
With this change, min freq will be at efficient frequency level at init
instead of fused min (RPn). If user chooses to reduce min freq below the
efficient freq, we will turn off usage of efficient frequency and honor
the user request. When a higher value is written, it will get toggled
back again.
The patch also corrects the register which needs to be read for obtaining
the correct efficient frequency for Gen9+.
We see much better perf numbers with benchmarks like glmark2 with
efficient frequency usage enabled as expected.
v2: Address review comments (Rodrigo)
v3: with efficient frequency being dynamic, it is possible that the req
frequency may go beyond max freq. This will cause SLPC selftests to fail.
Add a FIXME there to start the test with [RPn, RP0] instead and restore
it afterwards.
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/5468
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820010832.15350-1-vinay.belgaumkar@intel.com
|
|
Commit 368d179adbac ("drm/i915/guc: Add GuC <-> kernel time stamp
translation information") added intel_device_info_print_runtime() in the
time info dump for no obvious reason or explanation in the commit
message. It only logs the rawclk freq. Remove it.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b395ac4c909042f5daabf29959d8733993545aa2.1660910433.git.jani.nikula@intel.com
|
|
Now that we've finally gotten rid of the non-atomic MST users leftover in
the kernel, we can finally get rid of all of the legacy payload code we
have and move as much as possible into the MST atomic state structs. The
main purpose of this is to make the MST code a lot less confusing to work
on, as there's a lot of duplicated logic that doesn't really need to be
here. As well, this should make introducing features like fallback link
retraining and DSC support far easier.
Since the old payload code was pretty gnarly and there's a Lot of changes
here, I expect this might be a bit difficult to review. So to make things
as easy as possible for reviewers, I'll sum up how both the old and new
code worked here (it took me a while to figure this out too!).
The old MST code basically worked by maintaining two different payload
tables - proposed_vcpis, and payloads. proposed_vcpis would hold the
modified payload we wanted to push to the topology, while payloads held the
payload table that was currently programmed in hardware. Modifications to
proposed_vcpis would be handled through drm_dp_allocate_vcpi(),
drm_dp_mst_deallocate_vcpi(), and drm_dp_mst_reset_vcpi_slots(). Then, they
would be pushed via drm_dp_mst_update_payload_step1() and
drm_dp_mst_update_payload_step2().
Furthermore, it's important to note how adding and removing VC payloads
actually worked with drm_dp_mst_update_payload_step1(). When a VC payload
is removed from the VC table, all VC payloads which come after the removed
VC payload's slots must have their time slots shifted towards the start of
the table. The old code handles this by looping through the entire payload
table and recomputing the start slot for every payload in the topology from
scratch. While very much overkill, this ends up doing the right thing
because we always order the VCPIs for payloads from first to last starting
timeslot.
It's important to also note that drm_dp_mst_update_payload_step2() isn't
actually limited to updating a single payload - the driver can use it to
queue up multiple payload changes so that as many of them can be sent as
possible before waiting for the ACT. This is -technically- not against
spec, but as Wayne Lin has pointed out it's not consistently implemented
correctly in hubs - so it might as well be.
drm_dp_mst_update_payload_step2() is pretty self explanatory and basically
the same between the old and new code, save for the fact we don't have a
second step for deleting payloads anymore -and thus rename it to
drm_dp_mst_add_payload_step2().
The new payload code stores all of the current payload info within the MST
atomic state and computes as much of the state as possible ahead of time.
This has the one exception of the starting timeslots for payloads, which
can't be determined at atomic check time since the starting time slots will
vary depending on what order CRTCs are enabled in the atomic state - which
varies from driver to driver. These are still stored in the atomic MST
state, but are only copied from the old MST state during atomic commit
time. Likewise, this is when new start slots are determined.
Adding/removing payloads now works much more closely to how things are
described in the spec. When we delete a payload, we loop through the
current list of payloads and update the start slots for any payloads whose
time slots came after the payload we just deleted. Determining the starting
time slots for new payloads being added is done by simply keeping track of
where the end of the VC table is in
drm_dp_mst_topology_mgr->next_start_slot. Additionally, it's worth noting
that we no longer have a single update_payload() function. Instead, we now
have drm_dp_mst_add_payload_step1|2() and drm_dp_mst_remove_payload(). As
such, it's now left it up to the driver to figure out when to add or remove
payloads. The driver already knows when it's disabling/enabling CRTCs, so
it also already knows when payloads should be added or removed.
Changes since v1:
* Refactor around all of the completely dead code changes that are
happening in amdgpu for some reason when they really shouldn't even be
there in the first place… :\
* Remove mention of sending one ACT per series of payload updates. As Wayne
Lin pointed out, there are apparently hubs on the market that don't work
correctly with this scheme and require a separate ACT per payload update.
* Fix accidental drop of mst_mgr.lock - Wayne Lin
* Remove mentions of allowing multiple ACT updates per payload change,
mention that this is a result of vendors not consistently supporting this
part of the spec and requiring a unique ACT for each payload change.
* Get rid of reference to drm_dp_mst_port in DC - turns out I just got
myself confused by DC and we don't actually need this.
Changes since v2:
* Get rid of fix for not sending payload deallocations if ddps=0 and just
go back to wayne's fix
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-18-lyude@redhat.com
|
|
Right now, radeon is technically the only non-atomic driver still making
use of the MST helpers - and thus the final user of all of the legacy MST
helpers. Originally I was going to look into seeing if we could move legacy
MST into the radeon driver itself, however:
* SI and CIK both can use amdgpu, which still supports MST
* It currently doesn't work according to my own testing. I'm sure with some
troubleshooting we could likely fix it, but that brings me to point #2:
* It was never actually enabled by default, and is still marked as
experimental in the module parameter description
* If people were using it, someone probably would have probably seen a bug
report about how it is currently not functional by now. That certainly
doesn't appear to be the case, since before getting access to my own
hardware I had to go out of my way to try finding someone to help test
whether this legacy MST code even works - even amongst AMD employees.
* Getting rid of this code and only having atomic versions of the MST
helpers to maintain is likely going to be a lot easier in the long run,
and will make it a lot easier for others contributing to this code to
follow along with what's happening.
FWIW - if anyone still wants this code to be in the tree and has a good
idea of how to support this without needing to maintain the legacy MST
helpers (trying to move them would probably be acceptable), I'm happy to
suggestions. But my hope is that we can just drop this code and forget
about it. I've already run this idea by Harry Wentland and Alex Deucher a
few times as well.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-17-lyude@redhat.com
|
|
Currently, we set drm_dp_atomic_payload->time_slots to 0 in order to
indicate that we're about to delete a payload in the current atomic state.
Since we're going to be dropping all of the legacy code for handling the
payload table however, we need to be able to ensure that we still keep
track of the current time slot allocations for each payload so we can reuse
this info when asking the root MST hub to delete payloads. We'll also be
using it to recalculate the start slots of each VC.
So, let's keep track of the intent of a payload in drm_dp_atomic_payload by
adding ->delete, which we set whenever we're planning on deleting a payload
during the current atomic commit.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-16-lyude@redhat.com
|
|
link address work
We want to start cutting down on all of the places that we use port
validation, so that ports may be removed from the topology as quickly as
possible to minimize the number of errors we run into as a result of being
out of sync with the current topology status. This isn't a very typical
scenario and I don't think I've ever even run into it - but since the next
commit is going to make some changes to payload updates depending on their
hotplug status I think it's a probably good idea to take precautions.
Let's do this with CSNs by moving some code around so that we only queue
link address probing work at the end of handling all CSNs - allowing us to
make sure we drop as many topology references as we can beforehand.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-15-lyude@redhat.com
|
|
There's another kind of situation where we could potentially race with
nonblocking modesets and MST, especially if we were to only use the locking
provided by atomic modesetting:
* Display 1 begins as enabled on DP-1 in SST mode
* Display 1 switches to MST mode, exposes one sink in MST mode
* Userspace does non-blocking modeset to disable the SST display
* Userspace does non-blocking modeset to enable the MST display with a
different CRTC, but the SST display hasn't been fully taken down yet
* Execution order between the last two commits isn't guaranteed since they
share no drm resources
We can fix this however, by ensuring that we always pull in the atomic
topology state whenever a connector capable of driving an MST display
performs its atomic check - and then tracking CRTC commits happening on the
SST connector in the MST topology state. So, let's add some simple helpers
for doing that and hook them up in various drivers.
v2:
* Use intel_dp_mst_source_support() to check for MST support in i915, fixes
CI failures
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-14-lyude@redhat.com
|
|
Since we're going to be relying on atomic locking for payloads now (and the
MST mgr needs to track CRTCs), pull in the topology state for all modesets
in nv50_msto_atomic_check().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-13-lyude@redhat.com
|
|
Post-NV50, the only kind of encoder you'll find for DP connectors on Nvidia
GPUs are SORs (serial output resources). Because SORs have fixed
associations with their connectors, we can correctly assume that any DP
connector on a nvidia GPU will have exactly one SOR encoder routed to it
for DisplayPort.
Since we're going to need to be able to retrieve this fixed SOR DP encoder
much more often as a result of hooking up MST helpers for tracking
SST<->MST transitions in atomic states, let's simply cache this encoder in
nouveau_connector for any DP connectors on the system to avoid looking it
up each time. This isn't safe for NV50 since PIORs then come into play,
however there's no code pre-NV50 that would need to look this up anyhow -
so it's not really an issue.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-12-lyude@redhat.com
|
|
Currently with the MST helpers we avoid releasing payloads _and_ avoid
pulling in the MST state if there aren't any actual payload changes. While
we want to keep the first step, we need to now make sure that we're always
pulling in the MST state on all modesets that can modify payloads - even if
the resulting payloads in the atomic state are identical to the previous
ones.
This is mainly to make it so that if a CRTC is still assigned to a
connector but is set to DPMS off, the CRTC still holds it's payload
allocation in the atomic state and still appropriately pulls in the MST
state for commit tracking. Otherwise, we'll occasionally forget to update
MST payloads from changes caused by non-atomic DPMS changes. Doing this
also allows us to track bandwidth limitations in a state correctly even
between DPMS changes, so that there's no chance of a simple ->active change
being rejected by the atomic check.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-11-lyude@redhat.com
|
|
I'm not sure why, but at the time I originally wrote the find/release time
slot helpers I thought we should avoid keeping modeset tracking out of the
MST helpers. In retrospect though there's no actual good reason to do
this, and the logic has ended up being identical across all the drivers
using the helpers. Also, it needs to be fixed anyway so we don't break
things when going atomic-only with MST.
So, let's just move this code into drm_dp_atomic_release_time_slots() and
stop open coding it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-10-lyude@redhat.com
|
|
As Daniel Vetter pointed out, if we only use the atomic modesetting locks
with MST it's technically possible for a driver with non-blocking modesets
to race when it comes to MST displays - as we make the mistake of not doing
our own CRTC commit tracking in the topology_state object.
This could potentially cause problems if something like this happens:
* User starts non-blocking commit to disable CRTC-1 on MST topology 1
* User starts non-blocking commit to enable CRTC-2 on MST topology 1
There's no guarantee here that the commit for disabling CRTC-2 will only
occur after CRTC-1 has finished, since neither commit shares a CRTC - only
the private modesetting object for MST. Keep in mind this likely isn't a
problem for blocking modesets, only non-blocking.
So, begin fixing this by keeping track of which CRTCs on a topology have
changed by keeping track of which CRTCs we release or allocate timeslots
on. As well, add some helpers for:
* Setting up the drm_crtc_commit structs in the ->commit_setup hook
* Waiting for any CRTC dependencies from the previous topology state
v2:
* Use drm_dp_mst_atomic_setup_commit() directly - Jani
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-9-lyude@redhat.com
|
|
We already open-code this quite often, and will be iterating through
payloads even more once we've moved all of the payload tracking into the
atomic state. So, let's add a helper for doing this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-8-lyude@redhat.com
|
|
Since we're about to start adding some stuff here, we may as well fill in
any missing documentation that we forgot to write.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-7-lyude@redhat.com
|
|
For some reason we mention returning 0 if "slots have been added back to
drm_dp_mst_topology_state->avail_slots". This is totally misleading,
avail_slots is simply for figuring out the total number of slots available
in total on the topology and has no relation to the current payload
allocations.
So, let's get rid of that comment.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-6-lyude@redhat.com
|
|
VCPI is only sort of the correct term here, originally the majority of this
code simply referred to timeslots vaguely as "slots" - and since I started
working on it and adding atomic functionality, the name "VCPI slots" has
been used to represent time slots.
Now that we actually have consistent access to the DisplayPort spec thanks
to VESA, I now know this isn't actually the proper term - as the
specification refers to these as time slots.
Since we're trying to make this code as easy to figure out as possible,
let's take this opportunity to correct this nomenclature and call them by
their proper name - timeslots. Likewise, we rename various functions
appropriately, along with replacing references in the kernel documentation
and various debugging messages.
It's important to note that this patch series leaves the legacy MST code
untouched for the most part, which is fine since we'll be removing it soon
anyhow. There should be no functional changes in this series.
v2:
* Add note that Wayne Lin from AMD suggested regarding slots being between
the source DP Tx and the immediate downstream DP Rx
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-5-lyude@redhat.com
|
|
In retrospect, the name I chose for this originally is confusing, as
there's a lot more info in here then just the VCPI. This really should be
called a payload. Let's make it more obvious that this is meant to be
related to the atomic state and is about payloads by renaming it to
drm_dp_mst_atomic_payload. Also, rename various variables throughout the
code that use atomic payloads.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-4-lyude@redhat.com
|
|
This function isn't too confusing if you see the comment around the
call-site for it, but if you don't then it's not at all obvious this is
meant to copy DRM's payload table over to DC's internal state structs.
Seeing this function before finding that comment definitely threw me into a
loop a few times.
So, let's rename this to make it's purpose more obvious regardless of where
in the code you are.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-3-lyude@redhat.com
|
|
Just to make this more clear to outside contributors that these are
DC-specific structs, as this also threw me into a loop a number of times
before I figured out the purpose of this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-2-lyude@redhat.com
|
|
Add an eDP panel entry for IVO M133NW4J-R3.
Due to lack of documentation, use the delay_200_500_p2e100 timings for
now.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
[dianders: fixed typo in commit message]
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720054152.2450-1-steev@kali.org
|
|
Delete the redundant word 'at'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220821143038.46589-1-wangjianli@cdjrlc.com
|
|
This makes the code look cleaner and easier to read.
Signed-off-by: Beniamin Sandu <beniaminsandu@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220815104028.381271-1-beniaminsandu@gmail.com
|
|
Removes DEFINEs that should have been removed after they were
introduced to ObjectID.h by the commit abea57d70e90
("drm/amdgpu: Add BRACKET_LAYOUT_ENUMs to ObjectID.h")
Signed-off-by: Tales Aparecida <tales.aparecida@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DCN314 supports PCON.
[How]
Explicitly enable it in dcn314 resources.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable AMD_CG_SUPPORT_BIF_MGCG and AMD_CG_SUPPORT_BIF_LS support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add BIF Clock Gating MGCG and LS support for NBIO IP v7.7.0.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
