summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-08-29drm/amd/display: add a override flag as wa for some specific dongleLeo Chen
[Why & How] Add a override flag as wa for some specific dongle Co-authored-by: Leo Chen <sancchen@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Leo Chen <SanChuan.Chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Only commit SubVP state after pipe programmingAlvin Lee
[Description] We only want to commit the SubVP config to DMCUB after the main and phantom pipe programming has completed. Commiting the state early can cause issues such as P-State being allowed by the HW early which causes the SubVP state machine to go into a bad state Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/bridge: ps8640: Add double reset T4 and T5 to power-on sequenceHsin-Yi Wang
The double reset power-on sequence is a workaround for the hardware flaw in some chip that SPI Clock output glitch and cause internal MPU unable to read firmware correctly. The sequence is suggested in ps8640 application note. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Rock Chiu <rock.chiu@paradetech.corp-partner.google.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220815093905.134164-1-hsinyi@chromium.org
2022-08-29drm/amd/display: Remove assert from PHY state updateTaimur Hassan
[Why & How] In some cases, there are calls to transition from TX_ON to TX_ON. This is expected, so do not assert. However, these are redundant, so return prematurely. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: set dig fifo read start level to 7 before dig fifo resetWang Fudong
[Why] DIG_FIFO_ERROR = 1 caused mst daisy chain 2nd monitor black. [How] We need to set dig fifo read start level = 7 before dig fifo reset during dig fifo enable according to hardware designer's suggestion. If it is zero, it will cause underflow or overflow and DIG_FIFO_ERROR = 1. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Wang Fudong <Fudong.Wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amdgpu: Fix use-after-free in amdgpu_cs_ioctlYuBiao Wang
[Why] In amdgpu_cs_ioctl, amdgpu_job_free could be performed ealier if there is -ERESTARTSYS error. In this case, job->hw_fence could be not initialized yet. Putting hw_fence during amdgpu_job_free could lead to a use-after-free warning. [How] Check if drm_sched_job_init is performed before job_free by checking s_fence. v2: Check hw_fence.ops instead since it could be NULL if fence is not initialized. Reverse the condition since !=NULL check is discouraged in kernel. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Fix OTG H timing reset for dcn314Duncan Ma
[Why] When ODM is enabled, H timing control register reset to 0. Div mode manual field get overwritten causing no display on certain modes for dcn314. [How] Use REG_UPDATE instead of REG_SET to set div_mode field. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Refine aux transaction before retrieve capsLewis Huang
[Why] LTTPR caps will read fail if aux channel is not active. [How] 1.Perform 600 read upto 10 retry with 1ms delay in between. 2.If fail, return false and trigger another retry detection. 3.If pass, read LTTPR caps in retrieve link caps. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programmingGeorge Shen
[Why] Each index in the DPSTREAMCLK_CNTL register phyiscally maps 1-to-1 with HPO stream encoder instance. On the other hand, each index in DTBCLK_P_CNTL physically maps 1-to-1 with OTG instance. Current DCN32 DPSTREAMCLK_CLK programing assumes that OTG instance always maps 1-to-1 with HPO stream encoder instance. This is not always guaranteed and can result in blackscreen. [How] Program the correct dpstreamclk instance with the correct dtbclk_p source. Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Don't choose SubVP display if ActiveMargin > 0Alvin Lee
[Description] There can be SubVP scheduling issues if a SubVP display is chosen has ActiveDramClockChangeLatency > 0. Block this case for now, and enable Vactive case (later) to handle this. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Set ODM policy based on number of DSC slicesTaimur Hassan
[Why & How] Add addtional check in CalculateODMMode for cases where the ODM combine is needed due to number of DSC slices. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: 3.2.200Aric Cyr
This version brings along following fixes: - Modify pipe split policy - Fix odm 2:1 policy in 4k144 mode - Correct HDMI ODM combine policy - Change AUX NACK behavior - Change runtime initialization for DCN32/321 - Fix cursor flicker in PSRSU - Fix k1/k2 divider for virtual signal for DCN32 - Free phantom plane after removing the context - Add interface to track PHY state - Add SubVP scaling case - Add log clock table for SMU - Fix atomic_check check - Fix SMU 13.0.0 driver_if header - Fix doorbells allocation Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amdgpu: add missing pci_disable_device() in amdgpu_pmops_runtime_resume()Yang Yingliang
Add missing pci_disable_device() if amdgpu_device_resume() fails. Fixes: 8e4d5d43cc6c ("drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amd/display: Fix variable dereferenced before checksunliming
Fixes the following smatch warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:311 dc_dmub_srv_p_state_delegate() warn: variable dereferenced before check 'dc' (see line 309) Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: sunliming <sunliming@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amdgpu: Remove the unneeded result variableye xingchen
Return the value sdma_v5_2_start() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amdgpu: Update mes_v11_api_def.hGraham Sider
New GFX11 MES FW adds the trap_en bit. For now hardcode to 1 (traps enabled). Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amdgpu: disable FRU access on special SIENNA CICHLID cardGuchun Chen
Below driver load error will be printed, not friendly to end user. amdgpu: ATOM BIOS: 113-D603GLXE-077 [drm] FRU: Failed to get size field [drm:amdgpu_fru_get_product_info [amdgpu]] *ERROR* Failed to read FRU Manufacturer, ret:-5 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm: bridge: dw_hdmi: only trigger hotplug event on link changeLucas Stach
There are two events that signal a real change of the link state: HPD going high means the sink is newly connected or wants the source to re-read the EDID, RX sense going low is a indication that the link has been disconnected. Ignore the other two events that also trigger interrupts, but don't need immediate attention: HPD going low does not necessarily mean the link has been lost and should not trigger a immediate read of the status. RX sense going high also does not require a detect cycle, as HPD going high is the right point in time to read the EDID. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v1) Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220826185733.3213248-1-l.stach@pengutronix.de
2022-08-29drm/bridge: lvds-codec: Fix error checking of drm_of_lvds_get_data_mapping()Marek Vasut
The drm_of_lvds_get_data_mapping() returns either negative value on error or MEDIA_BUS_FMT_* otherwise. The check for 'ret' would also catch the positive case of MEDIA_BUS_FMT_* and lead to probe failure every time 'data-mapping' DT property is specified. Fixes: 7c4dd0a266527 ("drm: of: Add drm_of_lvds_get_data_mapping") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220801125419.167562-1-marex@denx.de
2022-08-29drm/bridge: tc358767: Handle bridge past DPI outputMarek Vasut
Currently the driver only handles panel directly connected to the DPI output. Handle the case where a bridge is connected past DPI output of this bridge. This could be e.g. DPI to LVDS encoder chip. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220724224317.288727-1-marex@denx.de
2022-08-29drm/bridge: anx7625: Support HDMI_I2S audio formatXin Ji
1. Support HDMI_I2S audio format. 2. Return 0 if there is no sink connection in .hw_param callback. Signed-off-by: Xin Ji <xji@analogixsemi.com> Acked-by: Hsin-Yi Wang <hsinyi@chromium.org> Acked-by: Jiaxin Yu<jiaxin.yu@mediatek.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220726033058.403715-1-xji@analogixsemi.com
2022-08-29drm/i915/guc: Remove log size module parametersJoonas Lahtinen
Remove the module parameters for configuring GuC log size. We should instead rely on tuning the defaults to be usable for reporting bugs. v2: - Use correct 1M unit Fixes: 8ad0152afb1b ("drm/i915/guc: Make GuC log sizes runtime configurable") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220826092343.184568-1-joonas.lahtinen@linux.intel.com
2022-08-29drm/gma500: Fix comment typoJason Wang
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220804114751.46714-1-wangborong@cdjrlc.com
2022-08-29drm/gma500: Fix SDVO command debug printingPatrik Jakobsson
At some point the DRM printers started adding a newline after each print. This caused SDVO command debug printing to look weird. Fix this by using snprintf to print into a buffer which can be printed as a whole by DRM_DEBUG_KMS(). Code is heavily inspired by i915. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220610130925.8650-1-patrik.r.jakobsson@gmail.com
2022-08-26drm/i915/dg2: Incorporate Wa_16014892111 into DRAW_WATERMARK tuningMatt Roper
Although register tuning settings are generally implemented via the workaround infrastructure, it turns out that the DRAW_WATERMARK register is not properly saved/restored by hardware around power events (i.e., RC6 entry) so updates to the value cannot be applied in the usual manner. New workaround Wa_16014892111 informs us that any tuning updates to this register must instead be applied via an INDIRECT_CTX batch buffer. This will ensure that the necessary value is re-applied when a context begins running, even if an RC6 entry had wiped the register back to hardware defaults since the last context ran. Fixes: 6dc85721df74 ("drm/i915/dg2: Add additional tuning settings") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6642 Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220823202449.83727-1-matthew.d.roper@intel.com
2022-08-26drm/tve200: Fix smatch warningLinus Walleij
The "ret" variable is ambiguously returning something that could be zero in the tve200_modeset_init() function, assign it an explicit error return code to make this unambiguous. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220505215019.2332613-1-linus.walleij@linaro.org
2022-08-26drm: bridge: icn6211: Add support for external REFCLKMarek Vasut
The ICN6211 is capable of deriving its internal PLL clock from either MIPI DSI HS clock, external REFCLK clock, or even internal oscillator. Currently supported is only the first option. Add support for external REFCLK clock input in addition to that. There is little difference between these options, except that in case of MIPI DSI HS clock input, the HS clock are pre-divided by a fixed /4 divider before being fed to the PLL input, while in case of external REFCLK, the RECLK clock are fed directly into the PLL input. Per exceptionally poor documentation, the REFCLK must be in range of 10..154 MHz. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220801131747.183041-2-marex@denx.de
2022-08-26dt-bindings: display: bridge: icn6211: Add support for external REFCLKMarek Vasut
The ICN6211 is capable of deriving its internal PLL clock from either MIPI DSI HS clock, external REFCLK clock, or even internal oscillator. Currently supported is only the first option. Document support for external REFCLK clock input in addition to that. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220801131747.183041-1-marex@denx.de
2022-08-26drm: bridge: icn6211: Add and use hs_rate and lp_rateMarek Vasut
Fill in hs_rate and lp_rate to struct mipi_dsi_device for this bridge and adjust DSI input frequency calculations such that they expect the DSI host to configure HS clock according to hs_rate. This is an optimization for the DSI burst mode case. In case the DSI device supports DSI burst mode, it is recommended to operate the DSI interface at the highest possible HS clock frequency which the DSI device supports. This permits the DSI host to send as short as possible bursts of data on the DSI link and keep the DSI data lanes in LP mode otherwise, which reduces power consumption. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220801131555.182969-1-marex@denx.de
2022-08-26drm: fix drm_mipi_dbi build errorsRandy Dunlap
drm_mipi_dbi needs lots of DRM_KMS_HELPER support, so select that Kconfig symbol like it is done is most other uses, and the way that it was before MIPS_DBI was moved from tinydrm to its core location. Fixes these build errors: ld: drivers/gpu/drm/drm_mipi_dbi.o: in function `mipi_dbi_buf_copy': drivers/gpu/drm/drm_mipi_dbi.c:205: undefined reference to `drm_gem_fb_get_obj' ld: drivers/gpu/drm/drm_mipi_dbi.c:211: undefined reference to `drm_gem_fb_begin_cpu_access' ld: drivers/gpu/drm/drm_mipi_dbi.c:215: undefined reference to `drm_gem_fb_vmap' ld: drivers/gpu/drm/drm_mipi_dbi.c:222: undefined reference to `drm_fb_swab' ld: drivers/gpu/drm/drm_mipi_dbi.c:224: undefined reference to `drm_fb_memcpy' ld: drivers/gpu/drm/drm_mipi_dbi.c:227: undefined reference to `drm_fb_xrgb8888_to_rgb565' ld: drivers/gpu/drm/drm_mipi_dbi.c:235: undefined reference to `drm_gem_fb_vunmap' ld: drivers/gpu/drm/drm_mipi_dbi.c:237: undefined reference to `drm_gem_fb_end_cpu_access' ld: drivers/gpu/drm/drm_mipi_dbi.o: in function `mipi_dbi_dev_init_with_formats': ld: drivers/gpu/drm/drm_mipi_dbi.o:/X64/../drivers/gpu/drm/drm_mipi_dbi.c:469: undefined reference to `drm_gem_fb_create_with_dirty' Fixes: 174102f4de23 ("drm/tinydrm: Move mipi-dbi") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Dillon Min <dillon.minfei@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220823004243.11596-1-rdunlap@infradead.org
2022-08-26drm/panel: use 'select' for Ili9341 panel driver helpersRandy Dunlap
Use 'select' instead of 'depends on' for DRM helpers for the Ilitek ILI9341 panel driver. This is what is done in the vast majority of other cases and this makes it possible to fix a build error with drm_mipi_dbi. Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dillon Min <dillon.minfei@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220823004227.10820-1-rdunlap@infradead.org
2022-08-26Merge tag 'drm-intel-gt-next-2022-08-24' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Create gt/gtN/.defaults/ for per gt sysfs defaults Create a gt/gtN/.defaults/ directory (similar to engine/<engine-name>/.defaults/) to expose default parameter values for each gt in sysfs. This allows userspace to restore default parameter values after they have changed. Driver Changes: - Support GuC v69 in parallel to v70 (Daniele) - Improve TLB invalidation to limit performance regression (Chris, Mauro) - Expose per-gt RPS defaults in sysfs (Ashutosh) - Suppress OOM warning for shmemfs object allocation failure (Chris, Nirmoy) - Disable PCI resize on 32-bit machines (Nirmoy) - Update DG2 to GuC v70.4.1 (John) - Fix CCS data copying on DG2 during swapping (Matt A) - Add DG2 performance tuning setting recommended by spec (Matt R) - Add GuC <-> kernel time stamp translation information to error logs (John) - Record GuC CTB info in error logs (John) - Route semaphores to GuC for Gen12+ when enabled (Michal Wi, John) - Improve resilency to bug #3575: Handle reset timeouts under unrelated kernel hangs (Chris, Ashutosh) - Avoid system freeze by removing shared locking on freeing objects (Chris, Nirmoy) - Demote GuC error "No response for request" into debug when expected (Zhanjun) - Fix GuC capture size warning and bump the size (John) - Use streaming loads to speed up dumping the GuC log (Chris, John) - Don't abort on CTB_UNUSED status from GuC (John) - Don't send spurious policy update for GuC child contexts (Daniele) - Don't leak the CCS state (Matt A) - Prefer drm_err over pr_err (John) - Eliminate unused calc_ctrl_surf_instr_size (Matt A) - Add dedicated function for non-ctx register tuning settings (Matt R) - Style and typo fixes, documentation improvements (Jason Wang, Mauro) - Selftest improvements (Matt B, Rahul, John) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YwYTCjA/Rhpd1n4A@jlahtine-mobl.ger.corp.intel.com
2022-08-25drm/i915/pxp: don't start pxp without mei_pxp bindJuston Li
pxp will not start correctly until after mei_pxp bind completes and intel_pxp_init_hw() is called. Wait for the bind to complete before proceeding with startup. This fixes a race condition during bootup where we observed a small window for pxp commands to be sent, starting pxp before mei_pxp bind completed. Changes since v2: - wait for pxp_component to bind instead of returning -EAGAIN (Daniele) Changes since v1: - check pxp_component instead of pxp_component_added (Daniele) - pxp_component needs tee_mutex (Daniele) - return -EAGAIN so caller knows to retry (Daniele) Signed-off-by: Juston Li <justonli@chromium.org> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220818174205.2412730-1-justonli@chromium.org
2022-08-25drm/i915/mtl: Don't mask off CCS according to DSS fusingMatt Roper
Unlike the Xe_HP platforms, MTL only has a single CCS engine; the quad-based engine masking logic does not apply to this platform (or presumably any future platforms that only have 0 or 1 CCS). Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220818234202.451742-5-radhakrishna.sripada@intel.com
2022-08-25drm/i915/mtl: MMIO range is now 4MBMatt Roper
Previously only dgfx platforms had a 4MB MMIO range, but starting with MTL we now use the larger range for all platforms. Bspec: 63834, 63830 Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220818234202.451742-4-radhakrishna.sripada@intel.com
2022-08-25drm/i915: Skip Bit12 fw domain reset for gen12+Radhakrishna Sripada
Bit12 of the Forcewake request register should not be cleared post gen12. Do not touch this bit while clearing during fw domain reset. v2: Tweak the comment to drop older platforms(MattR) Bspec: 52542 Signed-off-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220817224304.255767-1-radhakrishna.sripada@intel.com
2022-08-25drm/amd: remove possible condition with no effect (if == else)Bernard Zhao
This patch fix cocci warning: drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c:1816:6-8: WARNING: possible condition with no effect (if == else). Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd: remove possible condition with no effect (if == else)Bernard Zhao
This patch fix cocci warning: drivers/gpu/drm/amd/display/dc/core/dc.c:3335:2-4: WARNING: possible condition with no effect (if == else). Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd: fix potential memory leakBernard Zhao
This patch fix potential memory leak (clk_src) when function run into last return NULL. Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd: fix potential memory leakBernard Zhao
This patch fix potential memory leak (clk_src) when function run into last return NULL. s/free/kfree/ - Alex Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdgpu: mmVM_L2_CNTL3 register not initialized correctlyQu Huang
The mmVM_L2_CNTL3 register is not assigned an initial value Signed-off-by: Qu Huang <jinsdb@126.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm: amd: amdgpu: ACPI: Add comment about ACPI_FADT_LOW_POWER_S0Rafael J. Wysocki
According to the ACPI specification [1], the ACPI_FADT_LOW_POWER_S0 flag merely means that it is better to use low-power S0 idle on the given platform than S3 (provided that the latter is supported) and it doesn't preclude using either of them (which of them will be used depends on the choices made by user space). However, on some systems that flag is used to indicate whether or not to enable special firmware mechanics allowing the system to save more energy when suspended to idle. If that flag is unset, doing so is generally risky. Accordingly, add a comment to explain the ACPI_FADT_LOW_POWER_S0 check in amdgpu_acpi_is_s0ix_active(), the purpose of which is otherwise somewhat unclear. Link: https://uefi.org/specs/ACPI/6.4/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html#fixed-acpi-description-table-fadt # [1] Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/radeon: use time_after(a,b) to replace "a>b"Yu Zhe
time_after() deals with timer wrapping correctly. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdgpu: use dev_info to benefit mGPU caseGuchun Chen
'free PSP TMR buffer' happens in suspend, but sometimes in mGPU config, it mixes with PSP resume log printing from another GPU, which is confusing. So use dev_info instead of DRM_INFO for printing. [drm] PSP is resuming... [drm] reserve 0xa00000 from 0x877e000000 for PSP TMR amdgpu 0000:e3:00.0: amdgpu: GECC is enabled amdgpu 0000:e3:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available amdgpu 0000:e3:00.0: amdgpu: SMU is resuming... amdgpu 0000:e3:00.0: amdgpu: smu driver if version = 0x00000040, smu fw if version = 0x00000041, smu fw program = 0, version = 0x003a5400 (58.84.0) amdgpu 0000:e3:00.0: amdgpu: SMU driver if version not matched amdgpu 0000:e3:00.0: amdgpu: dpm has been enabled amdgpu 0000:e3:00.0: amdgpu: SMU is resumed successfully! [drm] DMUB hardware initialized: version=0x02020014 [drm] free PSP TMR buffer [drm] kiq ring mec 2 pipe 1 q 0 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdgpu: use adev_to_drm to get drm deviceGuchun Chen
adev_to_drm is used everywhere in amdgpu code, so modify it to keep consistency. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdgpu: add MGCG perfmon setting for gfx11Likun Gao
Enable GFX11 MGCG perfmon setting. V2: set rlc to saft mode before setting. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/amdgpu: avoid soft reset check when gpu recovery disabledChengming Gui
Avoid soft reset, even ip hang check (ring/ib test) when gpu recovery disabled. v2: add missing "}" Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdkfd: Fix isa version for the GC 10.3.7Prike Liang
Correct the isa version for handling KFD test. Fixes: 7c4f4f197e0c ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions") Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdgpu: Fix page table setup on ArcturusMukul Joshi
When translate_further is enabled, page table depth needs to be updated. This was missing on Arcturus MMHUB init. This was causing address translations to fail for SDMA user-mode queues. Fixes: 352e683b72e7 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdkfd: Allocate doorbells only when neededFelix Kuehling
Only allocate doorbells when the first queue is created on a GPU or the doorbells need to be mapped into CPU or GPU virtual address space. This avoids allocating doorbells unnecessarily and can allow more processes to use KFD on multi-GPU systems. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Kent Russell <kent.Russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 23:55:03 +0000