| Age | Commit message (Collapse) | Author |
|---|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a regression caused by the recent PCI/MSI rework
which resulted in a recursive locking problem in the VMD driver.
The cure is to cache the relevant information upfront instead of
retrieving it at runtime"
* tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI: vmd: Prevent recursive locking on interrupt allocation
|
|
Pull dma-mapping fix from Christoph Hellwig:
- fix a swiotlb info leak (Halil Pasic)
* tag 'dma-mapping-5.17-1' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix info leak with DMA_FROM_DEVICE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix some drive strength and pull-up code in the K210 driver.
- Add the Alder Lake-M ACPI ID so it starts to work properly.
- Use a static name for the StarFive GPIO irq_chip, forestalling an
upcoming fixes series from Marc Zyngier.
- Fix an ages old bug in the Tegra 186 driver where we were indexing at
random into struct and being lucky getting the right member.
* tag 'pinctrl-v5-17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
gpio: tegra186: Fix chip_data type confusion
pinctrl: starfive: Use a static name for the GPIO irq_chip
pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"
pinctrl: k210: Fix bias-pull-up
pinctrl: fix loop in k210_pinconf_get_drive()
|
|
Vladimir Oltean says:
====================
DSA FDB isolation
There are use cases which need FDB isolation between standalone ports
and bridged ports, as well as isolation between ports of different
bridges. Most of these use cases are a result of the fact that packets
can now be partially forwarded by the software bridge, so one port might
need to send a packet to the CPU but its FDB lookup will see that it can
forward it directly to a bridge port where that packet was autonomously
learned. So the source port will attempt to shortcircuit the CPU and
forward autonomously, which it can't due to the forwarding isolation we
have in place. So we will have packet drops instead of proper operation.
Additionally, before DSA can implement IFF_UNICAST_FLT for standalone
ports, we must have control over which database we install FDB entries
corresponding to port MAC addresses in. We don't want to hinder the
operation of the bridging layer.
DSA does not have a driver API that encourages FDB isolation, so this
needs to be created. The basis for this is a new struct dsa_db which
annotates each FDB and MDB entry with the database it belongs to.
The sja1105 and felix drivers are modified to observe the dsa_db
argument, and therefore, enforce the FDB isolation.
Compared to the previous RFC patch series from August:
https://patchwork.kernel.org/project/netdevbpf/cover/20210818120150.892647-1-vladimir.oltean@nxp.com/
what is different is that I stopped trying to make SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE
blocking, instead I'm making use of the fact that DSA waits for switchdev FDB work
items to finish before a port leaves the bridge. This is possible since:
https://patchwork.kernel.org/project/netdevbpf/patch/20211024171757.3753288-7-vladimir.oltean@nxp.com/
Additionally, v2 is also rebased over the DSA LAG FDB work.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently ocelot uses a pvid of 0 for standalone ports and ports under a
VLAN-unaware bridge, and the pvid of the bridge for ports under a
VLAN-aware bridge. Standalone ports do not perform learning, but packets
received on them are still subject to FDB lookups. So if the MAC DA that
a standalone port receives has been also learned on a VLAN-unaware
bridge port, ocelot will attempt to forward to that port, even though it
can't, so it will drop packets.
So there is a desire to avoid that, and isolate the FDBs of different
bridges from one another, and from standalone ports.
The ocelot switch library has two distinct entry points: the felix DSA
driver and the ocelot switchdev driver.
We need to code up a minimal bridge_num allocation in the ocelot
switchdev driver too, this is copied from DSA with the exception that
ocelot does not care about DSA trees, cross-chip bridging etc. So it
only looks at its own ports that are already in the same bridge.
The ocelot switchdev driver uses the bridge_num it has allocated itself,
while the felix driver uses the bridge_num allocated by DSA. They are
both stored inside ocelot_port->bridge_num by the common function
ocelot_port_bridge_join() which receives the bridge_num passed by value.
Once we have a bridge_num, we can only use it to enforce isolation
between VLAN-unaware bridges. As far as I can see, ocelot does not have
anything like a FID that further makes VLAN 100 from a port be different
to VLAN 100 from another port with regard to FDB lookup. So we simply
deny multiple VLAN-aware bridges.
For VLAN-unaware bridges, we crop the 4000-4095 VLAN region and we
allocate a VLAN for each bridge_num. This will be used as the pvid of
each port that is under that VLAN-unaware bridge, for as long as that
bridge is VLAN-unaware.
VID 0 remains only for standalone ports. It is okay if all standalone
ports use the same VID 0, since they perform no address learning, the
FDB will contain no entry in VLAN 0, so the packets will always be
flooded to the only possible destination, the CPU port.
The CPU port module doesn't need to be member of the VLANs to receive
packets, but if we use the DSA tag_8021q protocol, those packets are
part of the data plane as far as ocelot is concerned, so there it needs
to. Just ensure that the DSA tag_8021q CPU port is a member of all
reserved VLANs when it is created, and is removed when it is deleted.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For sja1105, to enforce FDB isolation simply means to turn on
Independent VLAN Learning unconditionally, and to remap VLAN-unaware FDB
and MDB entries towards the private VLAN allocated by tag_8021q for each
bridge.
Standalone ports each have their own standalone tag_8021q VLAN. No
learning happens in that VLAN due to:
- learning being disabled on standalone user ports
- learning being disabled on the CPU port (we use
assisted_learning_on_cpu_port which only installs bridge FDBs)
VLAN-aware ports learn FDB entries with the bridge VLANs.
VLAN-unaware bridge ports learn with the tag_8021q VLAN for bridging.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As FDB isolation cannot be enforced between VLAN-aware bridges in lack
of hardware assistance like extra FID bits, it seems plausible that many
DSA switches cannot do it. Therefore, they need to reject configurations
with multiple VLAN-aware bridges from the two code paths that can
transition towards that state:
- joining a VLAN-aware bridge
- toggling VLAN awareness on an existing bridge
The .port_vlan_filtering method already propagates the netlink extack to
the driver, let's propagate it from .port_bridge_join too, to make sure
that the driver can use the same function for both.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For DSA, to encourage drivers to perform FDB isolation simply means to
track which bridge does each FDB and MDB entry belong to. It then
becomes the driver responsibility to use something that makes the FDB
entry from one bridge not match the FDB lookup of ports from other
bridges.
The top-level functions where the bridge is determined are:
- dsa_port_fdb_{add,del}
- dsa_port_host_fdb_{add,del}
- dsa_port_mdb_{add,del}
- dsa_port_host_mdb_{add,del}
aka the pre-crosschip-notifier functions.
Changing the API to pass a reference to a bridge is not superfluous, and
looking at the passed bridge argument is not the same as having the
driver look at dsa_to_port(ds, port)->bridge from the ->port_fdb_add()
method.
DSA installs FDB and MDB entries on shared (CPU and DSA) ports as well,
and those do not have any dp->bridge information to retrieve, because
they are not in any bridge - they are merely the pipes that serve the
user ports that are in one or multiple bridges.
The struct dsa_bridge associated with each FDB/MDB entry is encapsulated
in a larger "struct dsa_db" database. Although only databases associated
to bridges are notified for now, this API will be the starting point for
implementing IFF_UNICAST_FLT in DSA. There, the idea is to install FDB
entries on the CPU port which belong to the corresponding user port's
port database. These are supposed to match only when the port is
standalone.
It is better to introduce the API in its expected final form than to
introduce it for bridges first, then to have to change drivers which may
have made one or more assumptions.
Drivers can use the provided bridge.num, but they can also use a
different numbering scheme that is more convenient.
DSA must perform refcounting on the CPU and DSA ports by also taking
into account the bridge number. So if two bridges request the same local
address, DSA must notify the driver twice, once for each bridge.
In fact, if the driver supports FDB isolation, DSA must perform
refcounting per bridge, but if the driver doesn't, DSA must refcount
host addresses across all bridges, otherwise it would be telling the
driver to delete an FDB entry for a bridge and the driver would delete
it for all bridges. So introduce a bool fdb_isolation in drivers which
would make all bridge databases passed to the cross-chip notifier have
the same number (0). This makes dsa_mac_addr_find() -> dsa_db_equal()
say that all bridge databases are the same database - which is
essentially the legacy behavior.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dsa_8021q_bridge_tx_fwd_offload_vid is no longer used just for
bridge TX forwarding offload, it is the private VLAN reserved for
VLAN-unaware bridging in a way that is compatible with FDB isolation.
So just rename it dsa_tag_8021q_bridge_vid.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the old Shared VLAN Learning mode of operation that tag_8021q
previously used for forwarding, we needed to have distinct concepts for
an RX and a TX VLAN.
An RX VLAN could be installed on all ports that were members of a given
bridge, so that autonomous forwarding could still work, while a TX VLAN
was dedicated for precise packet steering, so it just contained the CPU
port and one egress port.
Now that tag_8021q uses Independent VLAN Learning and imprecise RX/TX
all over, those lines have been blurred and we no longer have the need
to do precise TX towards a port that is in a bridge. As for standalone
ports, it is fine to use the same VLAN ID for both RX and TX.
This patch changes the tag_8021q format by shifting the VLAN range it
reserves, and halving it. Previously, our DIR bits were encoding the
VLAN direction (RX/TX) and were set to either 1 or 2. This meant that
tag_8021q reserved 2K VLANs, or 50% of the available range.
Change the DIR bits to a hardcoded value of 3 now, which makes tag_8021q
reserve only 1K VLANs, and a different range now (the last 1K). This is
done so that we leave the old format in place in case we need to return
to it.
In terms of code, the vid_is_dsa_8021q_rxvlan and vid_is_dsa_8021q_txvlan
functions go away. Any vid_is_dsa_8021q is both a TX and an RX VLAN, and
they are no longer distinct. For example, felix which did different
things for different VLAN types, now needs to handle the RX and the TX
logic for the same VLAN.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The felix driver, which also has a tagging protocol implementation based
on tag_8021q, does not care about adding the RX VLAN that is pvid on one
port on the other ports that are in the same bridge with it. It simply
doesn't need that, because in its implementation, the RX VLAN that is
pvid of a port is only used to install a TCAM rule that pushes that VLAN
ID towards the CPU port.
Now that tag_8021q no longer performs Shared VLAN Learning based
forwarding, the RX VLANs are actually segregated into two types:
standalone VLANs and VLAN-unaware bridging VLANs. Since you actually
have to call dsa_tag_8021q_bridge_join() to get a bridging VLAN from
tag_8021q, and felix does not do that because it doesn't need it, it
means that it only gets standalone port VLANs from tag_8021q. Which is
perfect because this means it can drop its workarounds that avoid the
VLANs it does not need.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After change "net: dsa: tag_8021q: replace the SVL bridging with
VLAN-unaware IVL bridging", tag_8021q enforces two different pvids on a
port, depending on whether it is standalone or in a VLAN-unaware bridge.
Up until now, there was a single pvid, represented by
dsa_tag_8021q_rx_vid(), and that was used as the VLAN for VLAN-unaware
virtual link rules, regardless of whether the port was bridged or
standalone.
To keep VLAN-unaware virtual links working, we need to follow whether
the port is in a bridge or not, and update the VLAN ID from those rules.
In fact we can't fully do that. Depending on whether the switch is
VLAN-aware or not, we can accept Virtual Link rules with just the MAC
DA, or with a MAC DA and a VID. So we already deny changes to the VLAN
awareness of the switch. But the VLAN awareness may also change as a
result of joining or leaving a bridge.
One might say we could just allow the following: a port may leave a
VLAN-unaware bridge while it has VLAN-unaware VL (tc-flower) rules, and
the driver will update those with the new tag_8021q pvid for standalone
mode, but the driver won't accept joining a bridge at all while VL rules
were installed in standalone mode. This is sort of a compromise made
because leaving a bridge is an operation that cannot be vetoed.
But this sort of setup change is not fully supported, either: as
mentioned, VLAN filtering changes can also be triggered by leaving a
bridge, therefore, the existing veto we have in place for turning VLAN
filtering off with VLAN-aware VL rules active still isn't fully
effective.
I really don't know how to deal with this in a way that produces
predictable behavior for user space. Since at the moment, keeping this
feature fully functional on constellation changes (not changing the
tag_8021q port pvid when joining a bridge) is blocking progress for the
DSA FDB isolation, I'd rather document it as a (potentially temporary)
limitation and go on without it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sja1105 switch can't populate the PORT field of the tag_8021q header
when sending a frame to the CPU with a non-zero VBID.
Similar to dsa_find_designated_bridge_port_by_vid() which performs
imprecise RX for VLAN-aware bridges, let's introduce a helper in
tag_8021q for performing imprecise RX based on the VLAN that it has
allocated for a VLAN-unaware bridge.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For VLAN-unaware bridging, tag_8021q uses something perhaps a bit too
tied with the sja1105 switch: each port uses the same pvid which is also
used for standalone operation (a unique one from which the source port
and device ID can be retrieved when packets from that port are forwarded
to the CPU). Since each port has a unique pvid when performing
autonomous forwarding, the switch must be configured for Shared VLAN
Learning (SVL) such that the VLAN ID itself is ignored when performing
FDB lookups. Without SVL, packets would always be flooded, since FDB
lookup in the source port's VLAN would never find any entry.
First of all, to make tag_8021q more palatable to switches which might
not support Shared VLAN Learning, let's just use a common VLAN for all
ports that are under the same bridge.
Secondly, using Shared VLAN Learning means that FDB isolation can never
be enforced. But if all ports under the same VLAN-unaware bridge share
the same VLAN ID, it can.
The disadvantage is that the CPU port can no longer perform precise
source port identification for these packets. But at least we have a
mechanism which has proven to be adequate for that situation: imprecise
RX (dsa_find_designated_bridge_port_by_vid), which is what we use for
termination on VLAN-aware bridges.
The VLAN ID that VLAN-unaware bridges will use with tag_8021q is the
same one as we were previously using for imprecise TX (bridge TX
forwarding offload). It is already allocated, it is just a matter of
using it.
Note that because now all ports under the same bridge share the same
VLAN, the complexity of performing a tag_8021q bridge join decreases
dramatically. We no longer have to install the RX VLAN of a newly
joining port into the port membership of the existing bridge ports.
The newly joining port just becomes a member of the VLAN corresponding
to that bridge, and the other ports are already members of it from when
they joined the bridge themselves. So forwarding works properly.
This means that we can unhook dsa_tag_8021q_bridge_{join,leave} from the
cross-chip notifier level dsa_switch_bridge_{join,leave}. We can put
these calls directly into the sja1105 driver.
With this new mode of operation, a port controlled by tag_8021q can have
two pvids whereas before it could only have one. The pvid for standalone
operation is different from the pvid used for VLAN-unaware bridging.
This is done, again, so that FDB isolation can be enforced.
Let tag_8021q manage this by deleting the standalone pvid when a port
joins a bridge, and restoring it when it leaves it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dimitris Michailidis says:
====================
new Fungible Ethernet driver
This patch series contains a new network driver for the Ethernet
functionality of Fungible cards.
It contains two modules. The first one in patch 2 is a library module
that implements some of the device setup, queue managenent, and support
for operating an admin queue. These are placed in a separate module
because the cards provide a number of PCI functions handled by different
types of drivers and all use the same common means to interact with the
device. Each of the drivers will be relying on this library module for
them.
The remaining patches provide the Ethernet driver for the cards.
v2:
- Fix set_pauseparam, remove get_wol, remove module param (Andrew Lunn)
- Fix a register poll loop (Andrew)
- Replace constants defined with 'static const'
- make W=1 C=1 is clean
- Remove devlink FW update (Jakub)
- Remove duplicate ethtool stats covered by structured API (Jakub)
v3:
- Make TLS stats unconditional (Andrew)
- Remove inline from .c (Andrew)
- Replace some ifdef with IS_ENABLED (Andrew)
- Fix build failure on 32b arches (build robot)
- Fix build issue with make O= (Jakub)
v4:
- Fix for newer bpf_warn_invalid_xdp_action() (Jakub)
- Remove 32b dma_set_mask_and_coherent()
v5:
- Make XDP enter/exit non-disruptive to active traffic
- Remove dormant port state
- Style fixes, unused stuff removal (Jakub)
v6:
- When changing queue depth or numbers allocate the new queues
before shutting down the existing ones (Jakub)
v7:
- Convert IRQ bookeeping to use XArray.
- Changes to the numbers of Tx/Rx queues are now incremental and
do not disrupt ongoing traffic.
- Implement .ndo_eth_ioctl instead of .ndo_do_ioctl.
- Replace deprecated irq_set_affinity_hint.
- Remove TLS 1.3 support (Jakub)
- Remove hwtstamp_config.flags check (Jakub)
- Add locking in SR-IOV enable/disable. (Jakub)
v8:
- Remove dropping of <33B packets and the associated counter (Jakub)
- Report CQE size.
- Show last MAC stats when the netdev isn't running (Andrew)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hook up the new driver to configuration and build.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This provides the control pieces for kTLS Tx offload, implementinng the
offload operations.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the driver's data path. Tx handles skbs, XDP, and kTLS, Rx has skbs
and XDP. Also included are Rx and Tx queue creation/tear-down and
tracing.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The devlink part, which is minimal at this time giving just the driver
name.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ethtool operations, primarily related to queues and ports, as well
as device statistics.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is the first part of the Fungible ethernet driver. It deals with
device probing, net_device creation, and netdev ops.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fungible cards have a number of different PCI functions and thus
different drivers, all of which use a common method to initialize and
interact with the device. This commit adds a library module that
collects these common mechanisms. They mainly deal with device
initialization, setting up and destroying queues, and operating an admin
queue. A subset of the FW interface is also included here.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- rtla (Real-Time Linux Analysis tool):
- fix typo in man page
- Update API -e to -E before it is released
- Error message fix and memory leak fix
- Partially uninline trace event soft disable to shrink text
- Fix function graph start up test
- Have triggers affect the trace instance they are in and not top level
- Have osnoise sleep in the units it says it uses
- Remove unused ftrace stub function
- Remove event probe redundant info from event in the buffer
- Fix group ownership setting in tracefs
- Ensure trace buffer is minimum size to prevent crashes
* tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla/osnoise: Fix error message when failing to enable trace instance
rtla/osnoise: Free params at the exit
rtla/hist: Make -E the short version of --entries
tracing: Fix selftest config check for function graph start up test
tracefs: Set the group ownership in apply_options() not parse_options()
tracing/osnoise: Make osnoise_main to sleep for microseconds
ftrace: Remove unused ftrace_startup_enable() stub
tracing: Ensure trace buffer is at least 4096 bytes large
tracing: Uninline trace_trigger_soft_disabled() partly
eprobes: Remove redundant event type information
tracing: Have traceon and traceoff trigger honor the instance
tracing: Dump stacktrace trigger to the corresponding instance
rtla: Fix systme -> system typo on man page
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Use kfree() to release kmalloced memblock regions
memblock.{reserved,memory}.regions may be allocated using kmalloc()
in memblock_double_array(). Use kfree() to release these kmalloced
regions"
* tag 'fixes-2022-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: use kfree() to release kmalloced memblock regions
|
|
Merge misc fixes from Andrew Morton:
"12 patches.
Subsystems affected by this patch series: MAINTAINERS, mailmap, memfd,
and mm (hugetlb, kasan, hugetlbfs, pagemap, selftests, memcg, and
slab)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
selftests/memfd: clean up mapping in mfd_fail_write
mailmap: update Roman Gushchin's email
MAINTAINERS, SLAB: add Roman as reviewer, git tree
MAINTAINERS: add Shakeel as a memcg co-maintainer
MAINTAINERS: remove Vladimir from memcg maintainers
MAINTAINERS: add Roman as a memcg co-maintainer
selftest/vm: fix map_fixed_noreplace test failure
mm: fix use-after-free bug when mm->mmap is reused after being freed
hugetlbfs: fix a truncation issue in hugepages parameter
kasan: test: prevent cache merging in kmem_cache_double_destroy
mm/hugetlb: fix kernel crash with hugetlb mremap
MAINTAINERS: add sysctl-next git tree
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the K210 sdcard defconfig, to avoid using a
fixed delay for the root FS
- A fix to make sure there's a proper call frame for
trace_hardirqs_{on,off}().
* tag 'riscv-for-linus-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix oops caused by irqsoff latency tracer
riscv: fix nommu_k210_sdcard_defconfig
|
|
Pull xfs fixes from Darrick Wong:
"Nothing exciting, just more fixes for not returning sync_filesystem
error values (and eliding it when it's not necessary).
Summary:
- Only call sync_filesystem when we're remounting the filesystem
readonly readonly, and actually check its return value"
* tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: only bother with sync_filesystem during readonly remount
|
|
Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
memfd-hugetlb: SEAL-SHRINK
fallocate(ALLOC) failed: No space left on device
./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs
opening: ./mnt/memfd
fuse: DONE
If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap. As a
result, two hugetlb pages remain reserved for the mapping. When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.
Fix by making sure to unmap in mfd_fail_write.
Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I'm moving to a @linux.dev account. Map my old addresses.
Link: https://lkml.kernel.org/r/20220221200006.416377-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The slab code has an overlap with kmem accounting, where Roman has done
a lot of work recently and it would be useful to make sure he's CC'd on
patches that potentially affect it. Thus add him as a reviewer for the
SLAB subsystem.
Also while at it, add the link to slab git tree.
Link: https://lkml.kernel.org/r/20220222103104.13241-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I have been contributing and reviewing to the memcg codebase for last
couple of years. So, making it official.
Link: https://lkml.kernel.org/r/20220224060148.4092228-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Link: https://lkml.kernel.org/r/4ad1f8da49d7b71c84a0c15bd5347f5ce704e730.1645608825.git.vdavydov.dev@gmail.com
Signed-off-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add myself as a memcg co-maintainer. My primary focus over last few
years was the kernel memory accounting stack, but I do work on some
other parts of the memory controller as well.
Link: https://lkml.kernel.org/r/20220221233951.659048-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On the latest RHEL the test fails due to executable mapped at 256MB
address
# ./map_fixed_noreplace
mmap() @ 0x10000000-0x10050000 p=0xffffffffffffffff result=File exists
10000000-10010000 r-xp 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
10010000-10020000 r--p 00000000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
10020000-10030000 rw-p 00010000 fd:04 34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
10029b90000-10029bc0000 rw-p 00000000 00:00 0 [heap]
7fffbb510000-7fffbb750000 r-xp 00000000 fd:04 24534 /usr/lib64/libc.so.6
7fffbb750000-7fffbb760000 r--p 00230000 fd:04 24534 /usr/lib64/libc.so.6
7fffbb760000-7fffbb770000 rw-p 00240000 fd:04 24534 /usr/lib64/libc.so.6
7fffbb780000-7fffbb7a0000 r--p 00000000 00:00 0 [vvar]
7fffbb7a0000-7fffbb7b0000 r-xp 00000000 00:00 0 [vdso]
7fffbb7b0000-7fffbb800000 r-xp 00000000 fd:04 24514 /usr/lib64/ld64.so.2
7fffbb800000-7fffbb810000 r--p 00040000 fd:04 24514 /usr/lib64/ld64.so.2
7fffbb810000-7fffbb820000 rw-p 00050000 fd:04 24514 /usr/lib64/ld64.so.2
7fffd93f0000-7fffd9420000 rw-p 00000000 00:00 0 [stack]
Error: couldn't map the space we need for the test
Fix this by finding a free address using mmap instead of hardcoding
BASE_ADDRESS.
Link: https://lkml.kernel.org/r/20220217083417.373823-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jann Horn <jannh@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
oom reaping (__oom_reap_task_mm) relies on a 2 way synchronization with
exit_mmap. First it relies on the mmap_lock to exclude from unlock
path[1], page tables tear down (free_pgtables) and vma destruction.
This alone is not sufficient because mm->mmap is never reset.
For historical reasons[2] the lock is taken there is also MMF_OOM_SKIP
set for oom victims before.
The oom reaper only ever looks at oom victims so the whole scheme works
properly but process_mrelease can opearate on any task (with fatal
signals pending) which doesn't really imply oom victims. That means
that the MMF_OOM_SKIP part of the synchronization doesn't work and it
can see a task after the whole address space has been demolished and
traverse an already released mm->mmap list. This leads to use after
free as properly caught up by KASAN report.
Fix the issue by reseting mm->mmap so that MMF_OOM_SKIP synchronization
is not needed anymore. The MMF_OOM_SKIP is not removed from exit_mmap
yet but it acts mostly as an optimization now.
[1] 27ae357fa82b ("mm, oom: fix concurrent munlock and oom reaper unmap, v3")
[2] 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
[mhocko@suse.com: changelog rewrite]
Link: https://lore.kernel.org/all/00000000000072ef2c05d7f81950@google.com/
Link: https://lkml.kernel.org/r/20220215201922.1908156-1-surenb@google.com
Fixes: 64591e8605d6 ("mm: protect free_pgtables with mmap_lock write lock in exit_mmap")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+2ccf63a4bd07cf39cab0@syzkaller.appspotmail.com
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jan Engelhardt <jengelh@inai.de>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we specify a large number for node in hugepages parameter, it may
be parsed to another number due to truncation in this statement:
node = tmp;
For example, add following parameter in command line:
hugepagesz=1G hugepages=4294967297:5
and kernel will allocate 5 hugepages for node 1 instead of ignoring it.
I move the validation check earlier to fix this issue, and slightly
simplifies the condition here.
Link: https://lkml.kernel.org/r/20220209134018.8242-1-liuyuntao10@huawei.com
Fixes: b5389086ad7be0 ("hugetlbfs: extend the definition of hugepages parameter to support node allocation")
Signed-off-by: Liu Yuntao <liuyuntao10@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With HW_TAGS KASAN and kasan.stacktrace=off, the cache created in the
kmem_cache_double_destroy() test might get merged with an existing one.
Thus, the first kmem_cache_destroy() call won't actually destroy it but
will only decrease the refcount. This causes the test to fail.
Provide an empty constructor for the created cache to prevent the cache
from getting merged.
Link: https://lkml.kernel.org/r/b597bd434c49591d8af00ee3993a42c609dc9a59.1644346040.git.andreyknvl@google.com
Fixes: f98f966cd750 ("kasan: test: add test case for double-kmem_cache_destroy()")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This fixes the below crash:
kernel BUG at include/linux/mm.h:2373!
cpu 0x5d: Vector: 700 (Program Check) at [c00000003c6e76e0]
pc: c000000000581a54: pmd_to_page+0x54/0x80
lr: c00000000058d184: move_hugetlb_page_tables+0x4e4/0x5b0
sp: c00000003c6e7980
msr: 9000000000029033
current = 0xc00000003bd8d980
paca = 0xc000200fff610100 irqmask: 0x03 irq_happened: 0x01
pid = 9349, comm = hugepage-mremap
kernel BUG at include/linux/mm.h:2373!
move_hugetlb_page_tables+0x4e4/0x5b0 (link register)
move_hugetlb_page_tables+0x22c/0x5b0 (unreliable)
move_page_tables+0xdbc/0x1010
move_vma+0x254/0x5f0
sys_mremap+0x7c0/0x900
system_call_exception+0x160/0x2c0
the kernel can't use huge_pte_offset before it set the pte entry because
a page table lookup check for huge PTE bit in the page table to
differentiate between a huge pte entry and a pointer to pte page. A
huge_pte_alloc won't mark the page table entry huge and hence kernel
should not use huge_pte_offset after a huge_pte_alloc.
Link: https://lkml.kernel.org/r/20220211063221.99293-1-aneesh.kumar@linux.ibm.com
Fixes: 550a7d60bd5e ("mm, hugepages: add mremap() support for hugepage backed vma")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a git tree for sysctls as there's been quite a bit of work lately to
remove all the syctls out of kernel/sysctl.c and move to their respective
places, so coordination has been needed to avoid conflicts. This tree
will also help soak these changes on linux-next prior to getting to Linus.
Link: https://lkml.kernel.org/r/20220218182736.3694508-1-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Menglong Dong says:
====================
net: use kfree_skb_reason() for ip/neighbour
In the series "net: use kfree_skb_reason() for ip/udp packet receive",
reasons for skb drops are added to the packet receive process of IP
layer. Link:
https://lore.kernel.org/netdev/20220205074739.543606-1-imagedong@tencent.com/
And in the first patch of this series, skb drop reasons are added to
the packet egress path of IP layer. As kfree_skb() is not used frequent,
I commit these changes at once and didn't create a patch for every
functions that involed. Following functions are handled:
__ip_queue_xmit()
ip_finish_output()
ip_mc_finish_output()
ip6_output()
ip6_finish_output()
ip6_finish_output2()
Following new drop reasons are introduced (what they mean can be seen
in the document of them):
SKB_DROP_REASON_IP_OUTNOROUTES
SKB_DROP_REASON_BPF_CGROUP_EGRESS
SKB_DROP_REASON_IPV6DISABLED
SKB_DROP_REASON_NEIGH_CREATEFAIL
In the 2th and 3th patches, kfree_skb_reason() is used in neighbour
subsystem instead of kfree_skb(). __neigh_event_send() and
arp_error_report() are involed, and following new drop reasons are
introduced:
SKB_DROP_REASON_NEIGH_FAILED
SKB_DROP_REASON_NEIGH_QUEUEFULL
SKB_DROP_REASON_NEIGH_DEAD
Changes since v2:
- fix typo in the 1th patch of 'SKB_DROP_REASON_IPV6DSIABLED' reported
by Roman
Changes since v1:
- introduce SKB_DROP_REASON_NEIGH_CREATEFAIL for some path in the 1th
patch
- introduce SKB_DROP_REASON_NEIGH_DEAD in the 2th patch
- simplify the document for the new drop reasons, as David Ahern
suggested
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When neighbour become invalid or destroyed, neigh_invalidate() will be
called. neigh->ops->error_report() will be called if the neighbour's
state is NUD_FAILED, and seems here is the only use of error_report().
So we can tell that the reason of skb drops in arp_error_report() is
SKB_DROP_REASON_NEIGH_FAILED.
Replace kfree_skb() used in arp_error_report() with kfree_skb_reason().
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb() used in __neigh_event_send() with
kfree_skb_reason(). Following drop reasons are added:
SKB_DROP_REASON_NEIGH_FAILED
SKB_DROP_REASON_NEIGH_QUEUEFULL
SKB_DROP_REASON_NEIGH_DEAD
The first two reasons above should be the hot path that skb drops
in neighbour subsystem.
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace kfree_skb() which is used in the packet egress path of IP layer
with kfree_skb_reason(). Functions that are involved include:
__ip_queue_xmit()
ip_finish_output()
ip_mc_finish_output()
ip6_output()
ip6_finish_output()
ip6_finish_output2()
Following new drop reasons are introduced:
SKB_DROP_REASON_IP_OUTNOROUTES
SKB_DROP_REASON_BPF_CGROUP_EGRESS
SKB_DROP_REASON_IPV6DISABLED
SKB_DROP_REASON_NEIGH_CREATEFAIL
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-02-25
This series contains updates to iavf driver only.
Slawomir fixes stability issues that can be seen when stressing the
driver using a large number of VFs with a multitude of operations.
Among the fixes are reworking mutexes to provide more effective locking,
ensuring initialization is complete before teardown, preventing
operations which could race while removing the driver, stopping certain
tasks from being queued when the device is down, and adding a missing
mutex unlock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Russell King says:
====================
net: dsa: ocelot: phylink updates
This series updates the Ocelot DSA driver for some of the recent
phylink changes. Specifically, we fill in the supported_interfaces
fields, convert to mac_select_pcs and mark the driver as non-legacy.
We do not convert to phylink_generic_validate() as Ocelot has
special support for its rate adapting PCS which makes the generic
validate method unsuitable for this driver.
The three changes mentioned above are implemented in their own
separate patches with one additional cleanup:
1) Populate the supported_interfaces bitmap
2) Remove the now unnecessary interface checks in the validate methods
3) Convert from phylink_set_pcs() to .mac_select_pcs.
4) Mark the driver as non-legacy
Thanks.
RFC -> non-RFC: add reviewed-by/tested-by's, update patch 1 to set the
supported_interfaces bitmap in felix.c rather than the sub-drivers as
requested by Vladimir.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ocelot DSA driver does not make use of the speed, duplex, pause or
advertisement in its phylink_mac_config() implementation, so it can be
marked as a non-legacy driver.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the PCS selection to use mac_select_pcs, which allows the PCS
to perform any validation it needs, and removes the need to set the PCS
in the mac_config() callback, delving into the higher DSA levels to do
so.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the supported interfaces bitmap is populated, phylink will itself
check that the interface mode is present in this bitmap. Drivers no
longer need to perform this check themselves. Remove these checks.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
