| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.12-2024-10-31:
amdgpu:
- DCN 3.5 fix
- Vangogh SMU KASAN fix
- SMU 13 profile reporting fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031151539.3523633-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
ivpu:
- Fix firewall IRQ handling
panthor:
- Fix firmware initialization wrt page sizes
- Fix handling and reporting of dead job groups
sched:
- Guarantee forward progress via WC_MEM_RECLAIM
tests:
- Fix memory leak in drm_display_mode_from_cea_vic()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241031144348.GA7826@linux-2.fritz.box
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here we see slightly more commits than wished, but basically all are
small and mostly trivial fixes.
The only core change is the workaround for __counted_by() usage in
ASoC DAPM code, while the rest are device-specific fixes for Intel
Baytrail devices, Cirrus and wcd937x codecs, and HD-audio / USB-audio
devices"
* tag 'sound-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix headset mic on TUXEDO Stellaris 16 Gen6 mb1
ALSA: hda/realtek: Fix headset mic on TUXEDO Gemini 17 Gen3
ALSA: usb-audio: Add quirks for Dell WD19 dock
ASoC: codecs: wcd937x: relax the AUX PDM watchdog
ASoC: codecs: wcd937x: add missing LO Switch control
ASoC: dt-bindings: rockchip,rk3308-codec: add port property
ALSA: hda/realtek: Add subwoofer quirk for Infinix ZERO BOOK 13
ASoC: dapm: fix bounds checker error in dapm_widget_list_create
ASoC: Intel: sst: Fix used of uninitialized ctx to log an error
ASoC: cs42l51: Fix some error handling paths in cs42l51_probe()
ASoC: Intel: sst: Support LPE0F28 ACPI HID
ALSA: hda/realtek: Limit internal Mic boost on Dell platform
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet
ASoC: Intel: bytcr_rt5640: Add support for non ACPI instantiated codec
ASoC: codecs: rt5640: Always disable IRQs from rt5640_cancel_work()
|
|
Add the missing newline after entries for recently removed gpio chips
so that the chip sections are separated by a newline as intended.
Fixes: e348544f7994 ("gpio: protect the list of GPIO devices with SRCU")
Cc: stable@vger.kernel.org # 6.9
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-3-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The gpiolib debugfs interface exports a list of all gpio chips in a
system and the state of their pins.
The gpio chip sections are supposed to be separated by a newline
character, but a long-standing bug prevents the separator from
being included when output is generated in multiple sessions, making the
output inconsistent and hard to read.
Make sure to only suppress the newline separator at the beginning of the
file as intended.
Fixes: f9c4a31f6150 ("gpiolib: Use seq_file's iterator interface")
Cc: stable@vger.kernel.org # 3.7
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241028125000.24051-2-johan+linaro@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
When running defrag (manual defrag) against a file that has extents that
are contiguous and we already have the respective extent maps loaded and
merged, we end up not defragging the range covered by those contiguous
extents. This happens when we have an extent map that was the result of
merging multiple extent maps for contiguous extents and the length of the
merged extent map is greater than or equals to the defrag threshold
length.
The script below reproduces this scenario:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a 256K file with 4 extents of 64K each.
xfs_io -f -c "falloc 0 64K" \
-c "pwrite 0 64K" \
-c "falloc 64K 64K" \
-c "pwrite 64K 64K" \
-c "falloc 128K 64K" \
-c "pwrite 128K 64K" \
-c "falloc 192K 64K" \
-c "pwrite 192K 64K" \
$MNT/foo
umount $MNT
echo -n "Initial number of file extent items: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
mount $DEV $MNT
# Read the whole file in order to load and merge extent maps.
cat $MNT/foo > /dev/null
btrfs filesystem defragment -t 128K $MNT/foo
umount $MNT
echo -n "Number of file extent items after defrag with 128K threshold: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
mount $DEV $MNT
# Read the whole file in order to load and merge extent maps.
cat $MNT/foo > /dev/null
btrfs filesystem defragment -t 256K $MNT/foo
umount $MNT
echo -n "Number of file extent items after defrag with 256K threshold: "
btrfs inspect-internal dump-tree -t 5 $DEV | grep EXTENT_DATA | wc -l
Running it:
$ ./test.sh
Initial number of file extent items: 4
Number of file extent items after defrag with 128K threshold: 4
Number of file extent items after defrag with 256K threshold: 4
The 4 extents don't get merged because we have an extent map with a size
of 256K that is the result of merging the individual extent maps for each
of the four 64K extents and at defrag_lookup_extent() we have a value of
zero for the generation threshold ('newer_than' argument) since this is a
manual defrag. As a consequence we don't call defrag_get_extent() to get
an extent map representing a single file extent item in the inode's
subvolume tree, so we end up using the merged extent map at
defrag_collect_targets() and decide not to defrag.
Fix this by updating defrag_lookup_extent() to always discard extent maps
that were merged and call defrag_get_extent() regardless of the minimum
generation threshold ('newer_than' argument).
A test case for fstests will be sent along soon.
CC: stable@vger.kernel.org # 6.1+
Fixes: 199257a78bb0 ("btrfs: defrag: don't use merged extent map for their generation check")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we have 3 or more adjacent extents in a file, that is, consecutive file
extent items pointing to adjacent extents, within a contiguous file range
and compatible flags, we end up not merging all the extents into a single
extent map.
For example:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -d -c "pwrite -b 64K 0 64K" \
-c "pwrite -b 64K 64K 64K" \
-c "pwrite -b 64K 128K 64K" \
-c "pwrite -b 64K 192K 64K" \
/mnt/sdc/foo
After all the ordered extents complete we unpin the extent maps and try
to merge them, but instead of getting a single extent map we get two
because:
1) When the first ordered extent completes (file range [0, 64K)) we
unpin its extent map and attempt to merge it with the extent map for
the range [64K, 128K), but we can't because that extent map is still
pinned;
2) When the second ordered extent completes (file range [64K, 128K)), we
unpin its extent map and merge it with the previous extent map, for
file range [0, 64K), but we can't merge with the next extent map, for
the file range [128K, 192K), because this one is still pinned.
The merged extent map for the file range [0, 128K) gets the flag
EXTENT_MAP_MERGED set;
3) When the third ordered extent completes (file range [128K, 192K)), we
unpin its extent map and attempt to merge it with the previous extent
map, for file range [0, 128K), but we can't because that extent map
has the flag EXTENT_MAP_MERGED set (mergeable_maps() returns false
due to different flags) while the extent map for the range [128K, 192K)
doesn't have that flag set.
We also can't merge it with the next extent map, for file range
[192K, 256K), because that one is still pinned.
At this moment we have 3 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 192K).
One for file range [192K, 256K) which is still pinned;
4) When the fourth and final extent completes (file range [192K, 256K)),
we unpin its extent map and attempt to merge it with the previous
extent map, for file range [128K, 192K), which succeeds since none
of these extent maps have the EXTENT_MAP_MERGED flag set.
So we end up with 2 extent maps:
One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 256K), with the flag EXTENT_MAP_MERGED set.
Since after merging extent maps we don't attempt to merge again, that
is, merge the resulting extent map with the one that is now preceding
it (and the one following it), we end up with those two extent maps,
when we could have had a single extent map to represent the whole file.
Fix this by making mergeable_maps() ignore the EXTENT_MAP_MERGED flag.
While this doesn't present any functional issue, it prevents the merging
of extent maps which allows to save memory, and can make defrag not
merging extents too (that will be addressed in the next patch).
Fixes: 199257a78bb0 ("btrfs: defrag: don't use merged extent map for their generation check")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The test_run code detects whether a page has been modified and
re-initialises the xdp_frame structure if it has, using
xdp_update_frame_from_buff(). However, xdp_update_frame_from_buff()
doesn't touch frame->mem, so that wasn't correctly re-initialised, which
led to the pages from page_pool not being returned correctly. Syzbot
noticed this as a memory leak.
Fix this by also copying the frame->mem structure when re-initialising
the frame, like we do on initialisation of a new page from page_pool.
Fixes: e5995bc7e2ba ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Reported-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+d121e098da06af416d23@syzkaller.appspotmail.com
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20241030-test-run-mem-fix-v1-1-41e88e8cae43@redhat.com
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.12
- Spec compliant identification fix (Keith)
- Module parameter to enable backward compatibility on unusual
namespace formats (Keith)
- Target double free fix when using keys (Vitaliy)
- Passthrough command error handling fix (Keith)"
* tag 'nvme-6.12-2024-10-31' of git://git.infradead.org/nvme:
nvme: re-fix error-handling for io_uring nvme-passthrough
nvmet-auth: assign dh_key to NULL after kfree_sensitive
nvme: module parameter to disable pi with offsets
nvme: enhance cns version checking
|
|
When io_uring starts a write, it'll call kiocb_start_write() to bump the
super block rwsem, preventing any freezes from happening while that
write is in-flight. The freeze side will grab that rwsem for writing,
excluding any new writers from happening and waiting for existing writes
to finish. But io_uring unconditionally uses kiocb_start_write(), which
will block if someone is currently attempting to freeze the mount point.
This causes a deadlock where freeze is waiting for previous writes to
complete, but the previous writes cannot complete, as the task that is
supposed to complete them is blocked waiting on starting a new write.
This results in the following stuck trace showing that dependency with
the write blocked starting a new write:
task:fio state:D stack:0 pid:886 tgid:886 ppid:876
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_rwsem_wait+0x1e8/0x3f8
__percpu_down_read+0xe8/0x500
io_write+0xbb8/0xff8
io_issue_sqe+0x10c/0x1020
io_submit_sqes+0x614/0x2110
__arm64_sys_io_uring_enter+0x524/0x1038
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
INFO: task fsfreeze:7364 blocked for more than 15 seconds.
Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963
with the attempting freezer stuck trying to grab the rwsem:
task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_down_write+0x2b0/0x680
freeze_super+0x248/0x8a8
do_vfs_ioctl+0x149c/0x1b18
__arm64_sys_ioctl+0xd0/0x1a0
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a
blocking grab of the super block rwsem if it isn't set. For normal issue
where IOCB_NOWAIT would always be set, this returns -EAGAIN which will
have io_uring core issue a blocking attempt of the write. That will in
turn also get completions run, ensuring forward progress.
Since freezing requires CAP_SYS_ADMIN in the first place, this isn't
something that can be triggered by a regular user.
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Peter Mann <peter.mann@sh.cz>
Link: https://lore.kernel.org/io-uring/38c94aec-81c9-4f62-b44e-1d87f5597644@sh.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Short circuiting TDR on jobs not started is an optimization which is not
required. On LNL we are facing an issue where jobs do not get scheduled
by the GuC if it misses a GGTT page update. When this occurs let the TDR
fire, toggle the scheduling which may get the job unstuck, and print a
warning message. If the TDR fires twice on job that hasn't started,
timeout the job.
v2:
- Add warning message (Paulo)
- Add fixes tag (Paulo)
- Timeout job which hasn't started after TDR firing twice
v3:
- Include local change
v4:
- Short circuit check_timeout on job not started
- use warn level rather than notice (Paulo)
Fixes: 7ddb9403dd74 ("drm/xe: Sample ctx timestamp to determine if jobs have timed out")
Cc: stable@vger.kernel.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025214330.2010521-2-matthew.brost@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 35d25a4a0012e690ef0cc4c5440231176db595cc)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
On LNL without a mmio read before a GGTT invalidate the GuC can
incorrectly read the GGTT scratch page upon next access leading to jobs
not getting scheduled. A mmio read before a GGTT invalidate seems to fix
this. Since a GGTT invalidate is not a hot code path, blindly do a mmio
read before each GGTT invalidate.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3164
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023221200.1797832-1-matthew.brost@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 5a710196883e0ac019ac6df2a6d79c16ad3c32fa)
[ Fix conflict with mmio vs gt argument ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: 7828b7bbbf20 ("gpio: add sloppy logic analyzer using polling")
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241030174132.2113286-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Since commit f79dc03fe68c ("kconfig: refactor choice value
calculation"), when EXPERT is disabled, nothing within the "if INPUT"
... "endif" block in drivers/input/Kconfig is displayed. This issue
affects all command-line interfaces and GUI frontends.
The prompt for INPUT is hidden when EXPERT is disabled. Previously,
menu_is_visible() returned true in this case; however, it now returns
false, resulting in all sub-menu entries being skipped.
Here is a simplified test case illustrating the issue:
config A
bool "A" if X
default y
config B
bool "B"
depends on A
When X is disabled, A becomes unconfigurable and is forced to y.
B should be displayed, as its dependency is met.
This commit restores the necessary code, so menu_is_visible() functions
as it did previously.
Fixes: f79dc03fe68c ("kconfig: refactor choice value calculation")
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/all/5fd0dfc7ff171aa74352e638c276069a5f2e888d.camel@proton.me/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The Debian kernel supports the pkg.linux.nokerneldbg build profile.
The debug package tends to become huge, and you may not want to build
it even when CONFIG_DEBUG_INFO is enabled.
This commit introduces a similar profile for the upstream kernel.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Since commit f1d87664b82a ("kbuild: cross-compile linux-headers package
when possible"), 'make bindeb-pkg' may attempt to cross-compile the
linux-headers package, but it fails under certain circumstances.
For example, when CONFIG_MODULE_SIG_FORMAT is enabled on Debian, the
following command fails:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg
[ snip ]
Rebuilding host programs with aarch64-linux-gnu-gcc...
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/kallsyms
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sorttable
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/asn1_compiler
HOSTCC debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sign-file
In file included from /usr/include/openssl/opensslv.h:109,
from debian/linux-headers-6.12.0-rc4/usr/src/linux-headers-6.12.0-rc4/scripts/sign-file.c:25:
/usr/include/openssl/macros.h:14:10: fatal error: openssl/opensslconf.h: No such file or directory
14 | #include <openssl/opensslconf.h>
| ^~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
This commit adds a new profile, pkg.linux-upstream.nokernelheaders, to
guard the linux-headers package.
There are two options to fix the above issue.
Option 1: Set the pkg.linux-upstream.nokernelheaders build profile
$ DEB_BUILD_PROFILES=pkg.linux-upstream.nokernelheaders \
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg
This skips the building of the linux-headers package.
Option 2: Install the necessary build dependencies
If you want to cross-compile the linux-headers package, you need to
install additional packages.
For example, on Debian, the packages necessary for cross-compiling it
to arm64 can be installed with the following commands:
# dpkg --add-architecture arm64
# apt update
# apt install gcc-aarch64-linux-gnu libssl-dev:arm64
Fixes: f1d87664b82a ("kbuild: cross-compile linux-headers package when possible")
Reported-by: Ron Economos <re@w6rz.net>
Closes: https://lore.kernel.org/all/b3d4f49e-7ddb-29ba-0967-689232329b53@w6rz.net/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Ron Economos <re@w6rz.net>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Since commit f1d87664b82a ("kbuild: cross-compile linux-headers package
when possible"), 'make binrpm-pkg' may attempt to cross-compile the
kernel-devel package, but it fails under certain circumstances.
For example, when CONFIG_MODULE_SIG_FORMAT is enabled on openSUSE
Tumbleweed, the following command fails:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-suse-linux- binrpm-pkg
[ snip ]
Rebuilding host programs with aarch64-suse-linux-gcc...
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/kallsyms
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sorttable
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/asn1_compiler
HOSTCC /home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sign-file
/home/masahiro/ref/linux/rpmbuild/BUILDROOT/kernel-6.12.0_rc4-1.aarch64/usr/src/kernels/6.12.0-rc4/scripts/sign-file.c:25:10: fatal error: openssl/opensslv.h: No such file or directory
25 | #include <openssl/opensslv.h>
| ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
I believe this issue is less common on Fedora because the disto's cross-
compilier cannot link user-space programs. Hence, CONFIG_CC_CAN_LINK is
unset.
On Fedora 40, the package information explains this limitation clearly:
$ dnf info gcc-aarch64-linux-gnu
[ snip ]
Description : Cross-build GNU C compiler.
:
: Only building kernels is currently supported. Support for cross-building
: user space programs is not currently provided as that would massively multiply
: the number of packages.
Anyway, cross-compiling RPM packages is somewhat challenging.
This commit disables the kernel-devel package when cross-compiling
because I did not come up with a better solution.
Fixes: f1d87664b82a ("kbuild: cross-compile linux-headers package when possible")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Fix an issue detected by the Smatch tool:
drivers/gpio/gpiolib-swnode.c:78 swnode_find_gpio() error:
uninitialized symbol 'ret'.
The issue occurs because the 'ret' variable may be used without
initialization if the for_each_gpio_property_name loop does not run.
This could lead to returning an undefined value, causing unpredictable
behavior.
Initialize 'ret' to 0 before the loop to ensure the function
returns an error code if no properties are parsed, maintaining proper
error handling.
Fixes: 9e4c6c1ad ("Merge tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux")
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://lore.kernel.org/r/20241026090642.28633-1-surajsonawane0215@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Remove unused parameters in conntrack_dump_flush.c used by
selftests, from Liu Jing.
2) Fix possible UaF when removing xtables module via getsockopt()
interface, from Dong Chenchen.
3) Fix potential crash in nf_send_reset6() reported by syzkaller.
From Eric Dumazet
4) Validate offset and length before calling skb_checksum()
in nft_payload, otherwise hitting BUG() is possible.
netfilter pull request 24-10-31
* tag 'nf-24-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()
netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()
netfilter: Fix use-after-free in get_info()
selftests: netfilter: remove unused parameter
====================
Link: https://patch.msgid.link/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci: fix null-ptr-deref in hci_read_supported_codecs
* tag 'for-net-2024-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
====================
Link: https://patch.msgid.link/20241030192205.38298-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
ChangeLog:
v2 -> v3:
- Rewrite the commit logs of net: hns3: add sync command to sync io-pgtable' to
add more verbose explanation, suggested Paolo.
- Add fixes tag for hardware issue, suggested Paolo and Simon Horman.
v2: https://lore.kernel.org/all/20241018101059.1718375-1-shaojijie@huawei.com/
v1 -> v2:
- Pass IRQF_NO_AUTOEN to request_irq(), suggested by Jakub.
- Rewrite the commit logs of 'net: hns3: default enable tx bounce buffer when smmu enabled'
and 'net: hns3: add sync command to sync io-pgtable'.
v1: https://lore.kernel.org/all/20241011094521.3008298-1-shaojijie@huawei.com/
====================
Link: https://patch.msgid.link/20241025092938.2912958-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL. But the tx process would still try to set hardware time
stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash.
[ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge]
[ 128.292938] sp : ffff800059b93140
[ 128.297200] x29: ffff800059b93140 x28: 0000000000003280
[ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080
[ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001
[ 128.315969] x23: 0000000000000000 x22: 0000000000000194
[ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000
[ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000
[ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24
[ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000
[ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368
[ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02
[ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0
[ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000
[ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff
[ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294
[ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080
[ 128.390626] Call trace:
[ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3]
[ 128.405468] xmit_one.constprop.0+0xc4/0x200
[ 128.410600] dev_hard_start_xmit+0x54/0xf0
[ 128.415556] sch_direct_xmit+0xe8/0x634
[ 128.420246] __dev_queue_xmit+0x224/0xc70
[ 128.425101] dev_queue_xmit+0x1c/0x40
[ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch]
[ 128.435409] do_output+0x60/0x17c [openvswitch]
[ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch]
[ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch]
[ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch]
[ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch]
[ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch]
[ 128.471460] xmit_one.constprop.0+0xc4/0x200
[ 128.476561] dev_hard_start_xmit+0x54/0xf0
[ 128.481489] __dev_queue_xmit+0x968/0xc70
[ 128.486330] dev_queue_xmit+0x1c/0x40
[ 128.490856] ip_finish_output2+0x250/0x570
[ 128.495810] __ip_finish_output+0x170/0x1e0
[ 128.500832] ip_finish_output+0x3c/0xf0
[ 128.505504] ip_output+0xbc/0x160
[ 128.509654] ip_send_skb+0x58/0xd4
[ 128.513892] udp_send_skb+0x12c/0x354
[ 128.518387] udp_sendmsg+0x7a8/0x9c0
[ 128.522793] inet_sendmsg+0x4c/0x8c
[ 128.527116] __sock_sendmsg+0x48/0x80
[ 128.531609] __sys_sendto+0x124/0x164
[ 128.536099] __arm64_sys_sendto+0x30/0x5c
[ 128.540935] invoke_syscall+0x50/0x130
[ 128.545508] el0_svc_common.constprop.0+0x10c/0x124
[ 128.551205] do_el0_svc+0x34/0xdc
[ 128.555347] el0_svc+0x20/0x30
[ 128.559227] el0_sync_handler+0xb8/0xc0
[ 128.563883] el0_sync+0x160/0x180
Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the misc irq is initialized before reset_timer setup. But
it will access the reset_timer in the irq handler. So initialize
the reset_timer earlier.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, there is a time window between misc irq enabled
and service task inited. If an interrupte is reported at
this time, it will cause warning like below:
[ 16.324639] Call trace:
[ 16.324641] __queue_delayed_work+0xb8/0xe0
[ 16.324643] mod_delayed_work_on+0x78/0xd0
[ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge]
[ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge]
[ 16.324666] __handle_irq_event_percpu+0x64/0x1e0
[ 16.324667] handle_irq_event+0x80/0x170
[ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc
[ 16.324671] __handle_domain_irq+0x84/0xfc
[ 16.324673] gic_handle_irq+0x88/0x2c0
[ 16.324674] el1_irq+0xb8/0x140
[ 16.324677] arch_cpu_idle+0x18/0x40
[ 16.324679] default_idle_call+0x5c/0x1bc
[ 16.324682] cpuidle_idle_call+0x18c/0x1c4
[ 16.324684] do_idle+0x174/0x17c
[ 16.324685] cpu_startup_entry+0x30/0x6c
[ 16.324687] secondary_start_kernel+0x1a4/0x280
[ 16.324688] ---[ end trace 6aa0bff672a964aa ]---
So don't auto enable misc vector when request irq..
Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch modifies the implementation of debugfs:
When the user process stops unexpectedly, not all data of the file system
is read. In this case, the save_buf pointer is not released. When the user
process is called next time, save_buf is used to copy the cached data
to the user space. As a result, the queried data is inconsistent. To solve
this problem, determine whether the function is invoked for the first time
based on the value of *ppos. If *ppos is 0, obtain the actual data.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a reset type that is not supported by the driver is input, a reset
pending flag bit of the HNAE3_NONE_RESET type is generated in
reset_pending. The driver does not have a mechanism to clear this type
of error. As a result, the driver considers that the reset is not
complete. This patch provides a mechanism to clear the
HNAE3_NONE_RESET flag and the parameter of
hnae3_ae_ops.set_default_reset_request is verified.
The error message:
hns3 0000:39:01.0: cmd failed -16
hns3 0000:39:01.0: hclge device re-init failed, VF is disabled!
hns3 0000:39:01.0: failed to reset VF stack
hns3 0000:39:01.0: failed to reset VF(4)
hns3 0000:39:01.0: prepare reset(2) wait done
hns3 0000:39:01.0 eth4: already uninitialized
Use the crash tool to view struct hclgevf_dev:
struct hclgevf_dev {
...
default_reset_request = 0x20,
reset_level = HNAE3_NONE_RESET,
reset_pending = 0x100,
reset_type = HNAE3_NONE_RESET,
...
};
Fixes: 720bd5837e37 ("net: hns3: add set_default_reset_request in the hnae3_ae_ops")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To avoid errors in pgtable prefectch, add a sync command to sync
io-pagtable.
This is a supplement for the previous patch.
We want all the tx packet can be handled with tx bounce buffer path.
But it depends on the remain space of the spare buffer, checked by the
hns3_can_use_tx_bounce(). In most cases, maybe 99.99%, it returns true.
But once it return false by no available space, the packet will be handled
with the former path, which will map/unmap the skb buffer.
Then the driver will face the smmu prefetch risk again.
So add a sync command in this case to avoid smmu prefectch,
just protects corner scenes.
Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.
This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.
Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If access to offset + length is larger than the skbuff length, then
skb_checksum() triggers BUG_ON().
skb_checksum() internally subtracts the length parameter while iterating
over skbuff, BUG_ON(len) at the end of it checks that the expected
length to be included in the checksum calculation is fully consumed.
Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support")
Reported-by: Slavin Liu <slavin-ayu@qq.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
modprobe drm_hdmi_state_helper_test and then rmmod it, the following
memory leak occurs.
The `mode` allocated in drm_mode_duplicate() called by
drm_display_mode_from_cea_vic() is not freed, which cause the memory leak:
unreferenced object 0xffffff80ccd18100 (size 128):
comm "kunit_try_catch", pid 1851, jiffies 4295059695
hex dump (first 32 bytes):
57 62 00 00 80 02 90 02 f0 02 20 03 00 00 e0 01 Wb........ .....
ea 01 ec 01 0d 02 00 00 0a 00 00 00 00 00 00 00 ................
backtrace (crc c2f1aa95):
[<000000000f10b11b>] kmemleak_alloc+0x34/0x40
[<000000001cd4cf73>] __kmalloc_cache_noprof+0x26c/0x2f4
[<00000000f1f3cffa>] drm_mode_duplicate+0x44/0x19c
[<000000008cbeef13>] drm_display_mode_from_cea_vic+0x88/0x98
[<0000000019daaacf>] 0xffffffedc11ae69c
[<000000000aad0f85>] kunit_try_run_case+0x13c/0x3ac
[<00000000a9210bac>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000000a0b2e9e>] kthread+0x2e8/0x374
[<00000000bd668858>] ret_from_fork+0x10/0x20
......
Free `mode` by using drm_kunit_display_mode_from_cea_vic()
to fix it.
Cc: stable@vger.kernel.org
Fixes: 4af70f19e559 ("drm/tests: Add RGB Quantization tests")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-4-ruanjinjie@huawei.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
modprobe drm_connector_test and then rmmod drm_connector_test,
the following memory leak occurs.
The `mode` allocated in drm_mode_duplicate() called by
drm_display_mode_from_cea_vic() is not freed, which cause the memory leak:
unreferenced object 0xffffff80cb0ee400 (size 128):
comm "kunit_try_catch", pid 1948, jiffies 4294950339
hex dump (first 32 bytes):
14 44 02 00 80 07 d8 07 04 08 98 08 00 00 38 04 .D............8.
3c 04 41 04 65 04 00 00 05 00 00 00 00 00 00 00 <.A.e...........
backtrace (crc 90e9585c):
[<00000000ec42e3d7>] kmemleak_alloc+0x34/0x40
[<00000000d0ef055a>] __kmalloc_cache_noprof+0x26c/0x2f4
[<00000000c2062161>] drm_mode_duplicate+0x44/0x19c
[<00000000f96c74aa>] drm_display_mode_from_cea_vic+0x88/0x98
[<00000000d8f2c8b4>] 0xffffffdc982a4868
[<000000005d164dbc>] kunit_try_run_case+0x13c/0x3ac
[<000000006fb23398>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<000000006ea56ca0>] kthread+0x2e8/0x374
[<000000000676063f>] ret_from_fork+0x10/0x20
......
Free `mode` by using drm_kunit_display_mode_from_cea_vic()
to fix it.
Cc: stable@vger.kernel.org
Fixes: abb6f74973e2 ("drm/tests: Add HDMI TDMS character rate tests")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-3-ruanjinjie@huawei.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
As Maxime suggested, add a new helper
drm_kunit_display_mode_from_cea_vic(), it can replace the direct call
of drm_display_mode_from_cea_vic(), and it will help solving
the `mode` memory leaks.
Acked-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-2-ruanjinjie@huawei.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Some page flags (page->flags) were converted to page types
(page->page_types). A recent example is PG_hugetlb.
From the exclusive writer's perspective, e.g., a thread doing
__folio_set_hugetlb(), there is a difference between the page flag and
type APIs: the former allows the same non-atomic operation to be repeated
whereas the latter does not. For example, calling __folio_set_hugetlb()
twice triggers VM_BUG_ON_FOLIO(), since the second call expects the type
(PG_hugetlb) not to be set previously.
Using add_hugetlb_folio() as an example, it calls __folio_set_hugetlb() in
the following error-handling path. And when that happens, it triggers the
aforementioned VM_BUG_ON_FOLIO().
if (folio_test_hugetlb(folio)) {
rc = hugetlb_vmemmap_restore_folio(h, folio);
if (rc) {
spin_lock_irq(&hugetlb_lock);
add_hugetlb_folio(h, folio, false);
...
It is possible to make hugeTLB comply with the new requirements from the
page type API. However, a straightforward fix would be to just allow the
same page type to be set or cleared again inside the API, to avoid any
changes to its callers.
Link: https://lkml.kernel.org/r/20241020042212.296781-1-yuzhao@google.com
Fixes: d99e3140a4d3 ("mm: turn folio_test_hugetlb into a PageType")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzbot reported that page_symlink(), called by nilfs_symlink(), triggers
memory reclamation involving the filesystem layer, which can result in
circular lock dependencies among the reader/writer semaphore
nilfs->ns_segctor_sem, s_writers percpu_rwsem (intwrite) and the
fs_reclaim pseudo lock.
This is because after commit 21fc61c73c39 ("don't put symlink bodies in
pagecache into highmem"), the gfp flags of the page cache for symbolic
links are overwritten to GFP_KERNEL via inode_nohighmem().
This is not a problem for symlinks read from the backing device, because
the __GFP_FS flag is dropped after inode_nohighmem() is called. However,
when a new symlink is created with nilfs_symlink(), the gfp flags remain
overwritten to GFP_KERNEL. Then, memory allocation called from
page_symlink() etc. triggers memory reclamation including the FS layer,
which may call nilfs_evict_inode() or nilfs_dirty_inode(). And these can
cause a deadlock if they are called while nilfs->ns_segctor_sem is held:
Fix this issue by dropping the __GFP_FS flag from the page cache GFP flags
of newly created symlinks in the same way that nilfs_new_inode() and
__nilfs_read_inode() do, as a workaround until we adopt nofs allocation
scope consistently or improve the locking constraints.
Link: https://lkml.kernel.org/r/20241020050003.4308-1-konishi.ryusuke@gmail.com
Fixes: 21fc61c73c39 ("don't put symlink bodies in pagecache into highmem")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9ef37ac20608f4836256
Tested-by: syzbot+9ef37ac20608f4836256@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzbot reports a slab out of bounds access in squashfs_readpage_block().
This is caused by an attempt to read page index 0x2000000000. This value
(start_index) is stored in an integer loop variable which overflows
producing a value of 0. This causes a loop which iterates over pages
start_index -> end_index to iterate over 0 -> end_index, which ultimately
causes an out of bounds page array access.
Fix by changing variable to a loff_t, and rename to index to make it
clearer it is a page index, and not a loop count.
Link: https://lkml.kernel.org/r/20241020232200.837231-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/ZwzcnCAosIPqQ9Ie@ly-workstation/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 1a2473f0cbc0 ("kasan: improve vmalloc tests") added the
vmalloc_percpu KASAN test with the assumption that __alloc_percpu always
uses vmalloc internally, which is tagged by KASAN.
However, __alloc_percpu might allocate memory from the first per-CPU
chunk, which is not allocated via vmalloc(). As a result, the test might
fail.
Remove the test until proper KASAN annotation for the per-CPU allocated
are added; tracked in https://bugzilla.kernel.org/show_bug.cgi?id=215019.
Link: https://lkml.kernel.org/r/20241022160706.38943-1-andrey.konovalov@linux.dev
Fixes: 1a2473f0cbc0 ("kasan: improve vmalloc tests")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/all/4a245fff-cc46-44d1-a5f9-fd2f1c3764ae@sifive.com/
Reported-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Link: https://lore.kernel.org/all/CACzwLxiWzNqPBp4C1VkaXZ2wDwvY3yZeetCi1TLGFipKW77drA@mail.gmail.com/
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit e6d2c436ff693 ("tools/mm: allow users to provide additional
cflags/ldflags") passes now CFLAGS to Makefile. With this, build systems
with default -Werror enabled found:
slabinfo.c:1300:25: error: ignoring return value of 'chdir'
declared with attribute 'warn_unused_result' [-Werror=unused-result]
chdir("..");
^~~~~~~~~~~
page-types.c:397:35: error: format '%lu' expects argument of type
'long unsigned int', but argument 2 has type 'uint64_t'
{aka 'long long unsigned int'} [-Werror=format=]
printf("%lu\t", mapcnt0);
~~^ ~~~~~~~
..
Fix page-types by using PRIu64 for uint64_t prints and check in slabinfo
for return code on chdir("..").
Link: https://lkml.kernel.org/r/c1ceb507-94bc-461c-934d-c19b77edd825@gmail.com
Fixes: e6d2c436ff69 ("tools/mm: allow users to provide additional cflags/ldflags")
Signed-off-by: Wladislav Wiebe <wladislav.kw@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Herton R. Krzesinski <herton@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When running low on usable slots, cluster allocator will try to reclaim
the full clusters aggressively to reclaim HAS_CACHE slots. This
guarantees that as long as there are any usable slots, HAS_CACHE or not,
the swap device will be usable and workload won't go OOM early.
Before the cluster allocator, swap allocator fails easily if device is
filled up with reclaimable HAS_CACHE slots. Which can be easily
reproduced with following simple program:
#include <stdio.h>
#include <string.h>
#include <linux/mman.h>
#include <sys/mman.h>
#define SIZE 8192UL * 1024UL * 1024UL
int main(int argc, char **argv) {
long tmp;
char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
memset(p, 0, SIZE);
madvise(p, SIZE, MADV_PAGEOUT);
for (unsigned long i = 0; i < SIZE; ++i)
tmp += p[i];
getchar(); /* Pause */
return 0;
}
Setup an 8G non ramdisk swap, the first run of the program will swapout 8G
ram successfully. But run same program again after the first run paused,
the second run can't swapout all 8G memory as now half of the swap device
is pinned by HAS_CACHE. There was a random scan in the old allocator that
may reclaim part of the HAS_CACHE by luck, but it's unreliable.
The new allocator's added reclaim of full clusters when device is low on
usable slots. But when multiple CPUs are seeing the device is low on
usable slots at the same time, they ran into a thundering herd problem.
This is an observable problem on large machine with mass parallel
workload, as full cluster reclaim is slower on large swap device and
higher number of CPUs will also make things worse.
Testing using a 128G ZRAM on a 48c96t system. When the swap device is
very close to full (eg. 124G / 128G), running build linux kernel with
make -j96 in a 1G memory cgroup will hung (not a softlockup though)
spinning in full cluster reclaim for about ~5min before go OOM.
To solve this, split the full reclaim into two parts:
- Instead of do a synchronous aggressively reclaim when device is low,
do only one aggressively reclaim when device is strictly full with a
kworker. This still ensures in worst case the device won't be unusable
because of HAS_CACHE slots.
- To avoid allocation (especially higher order) suffer from HAS_CACHE
filling up clusters and kworker not responsive enough, do one synchronous
scan every time the free list is drained, and only scan one cluster. This
is kind of similar to the random reclaim before, keeps the full clusters
rotated and has a minimal latency. This should provide a fair reclaim
strategy suitable for most workloads.
Link: https://lkml.kernel.org/r/20241022175512.10398-1-ryncsn@gmail.com
Fixes: 2cacbdfdee65 ("mm: swap: add a adaptive full cluster cache reclaim")
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to PSWPOUT, we should count the number of base pages instead of
large folios.
Link: https://lkml.kernel.org/r/20241023210201.2798-1-21cnbao@gmail.com
Fixes: 242d12c98174 ("mm: support large folios swap-in for sync io devices")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
An anonymous large folio can be split into non order-0 folios,
try_to_map_unused_to_zeropage() should not VM_BUG_ON compound pages but
just return false. This fixes the crash when splitting anonymous large
folios to non order-0 folios.
Link: https://lkml.kernel.org/r/20241023171236.1122535-1-ziy@nvidia.com
Fixes: b1f202060afe ("mm: remap unused subpages to shared zeropage when splitting isolated thp")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When we compile and load lib/slub_kunit.c,it will cause a panic.
The root cause is that __kmalloc_cache_noprof was directly called instead
of kmem_cache_alloc,which resulted in no alloc_tag being allocated.This
caused current->alloc_tag to be null,leading to a null pointer dereference
in alloc_tag_ref_set.
Despite the fact that my colleague Pei Xiao will later fix the code in
slub_kunit.c,we still need fix null pointer check logic for ref and tag to
avoid panic caused by a null pointer dereference.
Here is the log for the panic:
[ 74.779373][ T2158] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[ 74.780130][ T2158] Mem abort info:
[ 74.780406][ T2158] ESR = 0x0000000096000004
[ 74.780756][ T2158] EC = 0x25: DABT (current EL), IL = 32 bits
[ 74.781225][ T2158] SET = 0, FnV = 0
[ 74.781529][ T2158] EA = 0, S1PTW = 0
[ 74.781836][ T2158] FSC = 0x04: level 0 translation fault
[ 74.782288][ T2158] Data abort info:
[ 74.782577][ T2158] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 74.783068][ T2158] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 74.783533][ T2158] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 74.784010][ T2158] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000105f34000
[ 74.784586][ T2158] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000
[ 74.785293][ T2158] Internal error: Oops: 0000000096000004 [#1] SMP
[ 74.785805][ T2158] Modules linked in: slub_kunit kunit ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_mangle 4
[ 74.790661][ T2158] CPU: 0 UID: 0 PID: 2158 Comm: kunit_try_catch Kdump: loaded Tainted: G W N 6.12.0-rc3+ #2
[ 74.791535][ T2158] Tainted: [W]=WARN, [N]=TEST
[ 74.791889][ T2158] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 74.792479][ T2158] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 74.793101][ T2158] pc : alloc_tagging_slab_alloc_hook+0x120/0x270
[ 74.793607][ T2158] lr : alloc_tagging_slab_alloc_hook+0x120/0x270
[ 74.794095][ T2158] sp : ffff800084d33cd0
[ 74.794418][ T2158] x29: ffff800084d33cd0 x28: 0000000000000000 x27: 0000000000000000
[ 74.795095][ T2158] x26: 0000000000000000 x25: 0000000000000012 x24: ffff80007b30e314
[ 74.795822][ T2158] x23: ffff000390ff6f10 x22: 0000000000000000 x21: 0000000000000088
[ 74.796555][ T2158] x20: ffff000390285840 x19: fffffd7fc3ef7830 x18: ffffffffffffffff
[ 74.797283][ T2158] x17: ffff8000800e63b4 x16: ffff80007b33afc4 x15: ffff800081654c00
[ 74.798011][ T2158] x14: 0000000000000000 x13: 205d383531325420 x12: 5b5d383734363537
[ 74.798744][ T2158] x11: ffff800084d337e0 x10: 000000000000005d x9 : 00000000ffffffd0
[ 74.799476][ T2158] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008219d188 x6 : c0000000ffff7fff
[ 74.800206][ T2158] x5 : ffff0003fdbc9208 x4 : ffff800081edd188 x3 : 0000000000000001
[ 74.800932][ T2158] x2 : 0beaa6dee1ac5a00 x1 : 0beaa6dee1ac5a00 x0 : ffff80037c2cb000
[ 74.801656][ T2158] Call trace:
[ 74.801954][ T2158] alloc_tagging_slab_alloc_hook+0x120/0x270
[ 74.802494][ T2158] __kmalloc_cache_noprof+0x148/0x33c
[ 74.802976][ T2158] test_kmalloc_redzone_access+0x4c/0x104 [slub_kunit]
[ 74.803607][ T2158] kunit_try_run_case+0x70/0x17c [kunit]
[ 74.804124][ T2158] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit]
[ 74.804768][ T2158] kthread+0x10c/0x118
[ 74.805141][ T2158] ret_from_fork+0x10/0x20
[ 74.805540][ T2158] Code: b9400a80 11000400 b9000a80 97ffd858 (f94012d3)
[ 74.806176][ T2158] SMP: stopping secondary CPUs
[ 74.808130][ T2158] Starting crashdump kernel...
Link: https://lkml.kernel.org/r/20241020070819.307944-1-hao.ge@linux.dev
Fixes: e0a955bf7f61 ("mm/codetag: add pgalloc_tag_copy()")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If a driver tries to call any of the pin_user_pages*(FOLL_LONGTERM) family
of functions, and requests "too many" pages, then the call will
erroneously leave pages pinned. This is visible in user space as an
actual memory leak.
Repro is trivial: just make enough pin_user_pages(FOLL_LONGTERM) calls to
exhaust memory.
The root cause of the problem is this sequence, within
__gup_longterm_locked():
__get_user_pages_locked()
rc = check_and_migrate_movable_pages()
...which gets retried in a loop. The loop error handling is incomplete,
clearly due to a somewhat unusual and complicated tri-state error API.
But anyway, if -ENOMEM, or in fact, any unexpected error is returned from
check_and_migrate_movable_pages(), then __gup_longterm_locked() happily
returns the error, while leaving the pages pinned.
In the failed case, which is an app that requests (via a device driver)
30720000000 bytes to be pinned, and then exits, I see this:
$ grep foll /proc/vmstat
nr_foll_pin_acquired 7502048
nr_foll_pin_released 2048
And after applying this patch, it returns to balanced pins:
$ grep foll /proc/vmstat
nr_foll_pin_acquired 7502048
nr_foll_pin_released 7502048
Note that the child routine, check_and_migrate_movable_folios(), avoids
this problem, by unpinning any folios in the **folios argument, before
returning an error.
Fix this by making check_and_migrate_movable_pages() behave in exactly the
same way as check_and_migrate_movable_folios(): unpin all pages in
**pages, before returning an error.
Also, documentation was an aggravating factor, so:
1) Consolidate the documentation for these two routines, now that they
have identical external behavior.
2) Rewrite the consolidated documentation:
a) Clearly list the three return code cases, and what happens in
each case.
b) Mention that one of the cases unpins the pages or folios, before
returning an error code.
Link: https://lkml.kernel.org/r/20241018223411.310331-1-jhubbard@nvidia.com
Fixes: 24a95998e9ba ("mm/gup.c: simplify and fix check_and_migrate_movable_pages() return codes")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Shigeru Yoshida <syoshida@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
linux-firmware commit 808cba84 ("mtk_wed: add firmware for mt7988
Wireless Ethernet Dispatcher") added mt7988_wo_{0,1}.bin in the
'mediatek/mt7988' directory while driver current expects the files in
the 'mediatek' directory.
Change path in the driver header now that the firmware has been added.
Fixes: e2f64db13aa1 ("net: ethernet: mtk_wed: introduce WED support for MT7988")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/Zxz0GWTR5X5LdWPe@pidgin.makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr Machata says:
====================
mlxsw: Fixes
In this patchset:
- Tx header should be pushed for each packet which is transmitted via
Spectrum ASICs. Patch #1 adds a missing call to skb_cow_head() to make
sure that there is both enough room to push the Tx header and that the
SKB header is not cloned and can be modified.
- Commit b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers
allocation") converted mlxsw to use page pool for Rx buffers allocation.
Sync for CPU and for device should be done for Rx pages. In patches #2
and #3, add the missing calls to sync pages for, respectively, CPU and
the device.
- Patch #4 then fixes a bug to IPv6 GRE forwarding offload. Patch #5 adds
a generic forwarding test that fails with mlxsw ports prior to the fix.
====================
Link: https://patch.msgid.link/cover.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test that after changing the remote address of an ip6gre net device
traffic is forwarded as expected. Test with both flat and hierarchical
topologies and with and without an input / output keys.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/02b05246d2cdada0cf2fccffc0faa8a424d0f51b.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device stores IPv6 addresses that are used for encapsulation in
linear memory that is managed by the driver.
Changing the remote address of an ip6gre net device never worked
properly, but since cited commit the following reproducer [1] would
result in a warning [2] and a memory leak [3]. The problem is that the
new remote address is never added by the driver to its hash table (and
therefore the device) and the old address is never removed from it.
Fix by programming the new address when the configuration of the ip6gre
net device changes and removing the old one. If the address did not
change, then the above would result in increasing the reference count of
the address and then decreasing it.
[1]
# ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit
# ip link set dev bla type ip6gre remote 2001:db8:3::1
# ip link del dev bla
# devlink dev reload pci/0000:01:00.0
[2]
WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0
Modules linked in:
CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151
Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0
[...]
Call Trace:
<TASK>
mlxsw_sp_router_netdevice_event+0x55f/0x1240
notifier_call_chain+0x5a/0xd0
call_netdevice_notifiers_info+0x39/0x90
unregister_netdevice_many_notify+0x63e/0x9d0
rtnl_dellink+0x16b/0x3a0
rtnetlink_rcv_msg+0x142/0x3f0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x242/0x390
netlink_sendmsg+0x1de/0x420
____sys_sendmsg+0x2bd/0x320
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xd0
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[3]
unreferenced object 0xffff898081f597a0 (size 32):
comm "ip", pid 1626, jiffies 4294719324
hex dump (first 32 bytes):
20 01 0d b8 00 02 00 00 00 00 00 00 00 00 00 01 ...............
21 49 61 83 80 89 ff ff 00 00 00 00 01 00 00 00 !Ia.............
backtrace (crc fd9be911):
[<00000000df89c55d>] __kmalloc_cache_noprof+0x1da/0x260
[<00000000ff2a1ddb>] mlxsw_sp_ipv6_addr_kvdl_index_get+0x281/0x340
[<000000009ddd445d>] mlxsw_sp_router_netdevice_event+0x47b/0x1240
[<00000000743e7757>] notifier_call_chain+0x5a/0xd0
[<000000007c7b9e13>] call_netdevice_notifiers_info+0x39/0x90
[<000000002509645d>] register_netdevice+0x5f7/0x7a0
[<00000000c2e7d2a9>] ip6gre_newlink_common.isra.0+0x65/0x130
[<0000000087cd6d8d>] ip6gre_newlink+0x72/0x120
[<000000004df7c7cc>] rtnl_newlink+0x471/0xa20
[<0000000057ed632a>] rtnetlink_rcv_msg+0x142/0x3f0
[<0000000032e0d5b5>] netlink_rcv_skb+0x50/0x100
[<00000000908bca63>] netlink_unicast+0x242/0x390
[<00000000cdbe1c87>] netlink_sendmsg+0x1de/0x420
[<0000000011db153e>] ____sys_sendmsg+0x2bd/0x320
[<000000003b6d53eb>] ___sys_sendmsg+0x9a/0xe0
[<00000000cae27c62>] __sys_sendmsg+0x7a/0xd0
Fixes: cf42911523e0 ("mlxsw: spectrum_ipip: Use common hash table for IPv6 address mapping")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/e91012edc5a6cb9df37b78fd377f669381facfcb.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Non-coherent architectures, like ARM, may require invalidating caches
before the device can use the DMA mapped memory, which means that before
posting pages to device, drivers should sync the memory for device.
Sync for device can be configured as page pool responsibility. Set the
relevant flag and define max_len for sync.
Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/92e01f05c4f506a4f0a9b39c10175dcc01994910.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When Rx packet is received, drivers should sync the pages for CPU, to
ensure the CPU reads the data written by the device and not stale
data from its cache.
Add the missing sync call in Rx path, sync the actual length of data for
each fragment.
Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/461486fac91755ca4e04c2068c102250026dcd0b.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
