summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-05Merge branch 'remotes/lorenzo/pci/loongson'Bjorn Helgaas
- Fix loongson class code quirk so it happens early enough (Tiezhu Yang) * remotes/lorenzo/pci/loongson: PCI: loongson: Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk()
2020-08-05Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas
- Fix hv timing issue that causes kdump failures (Wei Hu) - Make some hv functions static (Wei Yongjun) * remotes/lorenzo/pci/hv: PCI: hv: Make some functions static PCI: hv: Fix a timing issue which causes kdump to fail occasionally
2020-08-05Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas
- Add qcom ipq806x support (Ansuel Smith) - Support max-link-speed DT property for qcom (Sham Muthayyan) - Use PCI core #defines instead of adding qcom-specific ones (Ansuel Smith) - Convert to devm_platform_ioremap_resource_byname() instead of open-coding platform_get_resource_byname() and devm_ioremap_resource() for dra7xx, keystone, artpec6, designware-plat, histb, intel-gw, kirin, qcom, uniphier (Dejin Zheng) - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) * remotes/lorenzo/pci/dwc: PCI: dwc: hisi: Remove non-ECAM HiSilicon hip05/hip06 driver PCI: dwc: Convert to devm_platform_ioremap_resource_byname() PCI: qcom: Replace define with standard value PCI: qcom: Support pci speed set for ipq806x dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant PCI: qcom: Add ipq8064 rev2 variant PCI: qcom: Add support for tx term offset for rev 2.1.0 PCI: qcom: Define some PARF params needed for ipq8064 SoC PCI: qcom: Use bulk clk api and assert on error dt-bindings: PCI: qcom: Add ext reset PCI: qcom: Add missing reset for ipq806x PCI: qcom: Change duplicate PCI reset to phy reset dt-bindings: PCI: qcom: Add missing clks PCI: qcom: Add missing ipq806x clocks in PCIe driver
2020-08-05Merge branch 'remotes/lorenzo/pci/cadence'Bjorn Helgaas
- Convert cadence to use standard "dma-ranges" DT property instead of its own "cdns,no-bar-match-nbits" (Kishon Vijay Abraham I) - Fix pm_runtime_put_sync() issues in cadence error paths (Kishon Vijay Abraham I) - Add PTR_ALIGN_DOWN macro (Kishon Vijay Abraham I) - Convert cadence r/w accessors to only 32-bit accesses (Kishon Vijay Abraham I) - Add cadence support to start Link and check Link status (Kishon Vijay Abraham I) - Allow custom PCI ops for cadence-based drivers (Kishon Vijay Abraham I) - Remove "mem" from cadence reg binding since it's not memory and it overlaps the PCIe config and memory region (Kishon Vijay Abraham I) - Add cadence ->cpu_addr_fixup() for platforms that require absolute addresses in the ATU, not just offsets (Kishon Vijay Abraham I) - Update cadence Vendor IDs using local management registers, not architected config space (Kishon Vijay Abraham I) - Add cadence endpoint driver MSI-X support (Kishon Vijay Abraham I) - Add bindings and driver for TI J721E SoC, supporting both host and endpoint mode (Kishon Vijay Abraham I) * remotes/lorenzo/pci/cadence: MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC PCI: cadence: Add MSI-X support to Endpoint driver PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register PCI: cadence: Add new *ops* for CPU addr fixup dt-bindings: PCI: cadence: Remove "mem" from reg binding PCI: cadence: Allow pci_host_bridge to have custom pci_ops PCI: cadence: Add support to start link and verify link status PCI: cadence: Convert all r/w accessors to perform only 32-bit accesses linux/kernel.h: Add PTR_ALIGN_DOWN macro PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
2020-08-05Merge branch 'remotes/lorenzo/pci/aardvark'Bjorn Helgaas
- Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) * remotes/lorenzo/pci/aardvark: PCI: aardvark: Don't touch PCIe registers if no card connected PCI: aardvark: Indicate error in 'val' when config read fails
2020-08-05Merge branch 'pci/switchtec'Bjorn Helgaas
- Add __iomem and __user tags to switchtec driver (Logan Gunthorpe) * pci/switchtec: PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings
2020-08-05Merge branch 'pci/virtualization'Bjorn Helgaas
- Remove redundant variable init in xen (Colin Ian King) - Add pci_pri_supported() to check device or associated PF for PRI support (Ashok Raj) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Release IVRS table in AMD ACS quirk (Hanjun Guo) * pci/virtualization: PCI: Release IVRS table in AMD ACS quirk PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI/ATS: Add pci_pri_supported() to check device or associated PF xen: Remove redundant initialization of irq
2020-08-05Merge branch 'pci/peer-to-peer'Bjorn Helgaas
- Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) * pci/peer-to-peer: PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs
2020-08-05Merge branch 'pci/msi'Bjorn Helgaas
- Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) * pci/msi: PCI/MSI: Forward MSI-X error code in pci_alloc_irq_vectors_affinity()
2020-08-05Merge branch 'pci/misc'Bjorn Helgaas
- Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Update panic message to mention kzalloc(), not kmalloc() (Liao Pingfang) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Remove unused pci_lost_interrupt() (Heiner Kallweit) * pci/misc: PCI: Remove unused pci_lost_interrupt() PCI: Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h PCI: Fix error in panic message PCI: Replace lkml.org, spinics, gmane with lore.kernel.org PCI: Replace http:// links with https:// PCI: Align PCIe capability and PCI accessor return values PCI: Convert PCIe capability PCIBIOS errors to errno
2020-08-05Merge branch 'pci/hotplug'Bjorn Helgaas
- Fix pci_create_slot() reference count leak in failure path (Qiushi Wu) - Make rpadlpar functions static (Wei Yongjun) * pci/hotplug: PCI: rpadlpar: Make functions static PCI: Fix pci_create_slot() reference count leak
2020-08-05Merge branch 'pci/error'Bjorn Helgaas
- Use pci_channel_state_t instead of enum pci_channel_state (Luc Van Oostenryck) - Simplify __aer_print_error() (Bjorn Helgaas) - Log AER correctable errors as warning, not error (Matt Jolly) - Rename pci_aer_clear_device_status() to pcie_clear_device_status() (Bjorn Helgaas) - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) * pci/error: PCI/ERR: Clear PCIe Device Status errors only if OS owns AER PCI/ERR: Rename pci_aer_clear_device_status() to pcie_clear_device_status() PCI/AER: Log correctable errors as warning, not error PCI/AER: Simplify __aer_print_error() PCI: Use 'pci_channel_state_t' instead of 'enum pci_channel_state'
2020-08-05Merge branch 'pci/enumeration'Bjorn Helgaas
- Fix pci_cfg_wait queue locking problem (Xiang Zheng, Bjorn Helgaas) - Keep device in system even if driver attach fails (Rajat Jain) - Cache ACS capability offset in device (Rajat Jain) - Treat "external-facing" devices themselves as internal, not external (Rajat Jain) - Announce device after early fixups (Tiezhu Yang) * pci/enumeration: PCI: Announce device after early fixups PCI: Treat "external-facing" devices themselves as internal PCI: Cache ACS capability offset in device PCI: Reorder pci_enable_acs() and dependencies PCI: Add device even if driver attach failed PCI: Fix pci_cfg_wait queue locking problem
2020-08-05Merge branch 'pci/aspm'Bjorn Helgaas
- Add newline to ASPM sysfs "policy" file (Xiongfeng Wang) * pci/aspm: PCI/ASPM: Add missing newline in sysfs 'policy'
2020-08-03MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIeKishon Vijay Abraham I
Add Kishon Vijay Abraham I as MAINTAINER for TI J721E SoC PCIe. Link: https://lore.kernel.org/r/20200722110317.4744-16-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2020-08-03misc: pci_endpoint_test: Add J721E in pci_device_id tableKishon Vijay Abraham I
Add J721E in pci_device_id table so that pci-epf-test can be used for testing PCIe EP in J721E. Link: https://lore.kernel.org/r/20200722110317.4744-15-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-08-03PCI: j721e: Add TI J721E PCIe driverKishon Vijay Abraham I
Add support for PCIe controller in J721E SoC. The controller uses the Cadence PCIe core programmed by pcie-cadence*.c. The PCIe controller will work in both host mode and device mode. Some of the features of the controller are: *) Supports both RC mode and EP mode *) Supports MSI and MSI-X support *) Supports upto GEN3 speed mode *) Supports SR-IOV capability *) Ability to route all transactions via SMMU (support will be added in a later patch). Link: https://lore.kernel.org/r/20200722110317.4744-14-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-07-31PCI: switchtec: Add missing __iomem tag to fix sparse warningsLogan Gunthorpe
Fix a missing __iomem tag in the init_pfn() function. This fixes a sparse warning of the form: $ make C=2 drivers/pci/switch/ drivers/pci/switch/switchtec.c:... incorrect type assignment(different address spaces) Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver") Link: https://lore.kernel.org/r/20200728192434.18993-2-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-31PCI: switchtec: Add missing __iomem and __user tags to fix sparse warningsLogan Gunthorpe
Fix a number of missing __iomem and __user tags in the ioctl functions of the switchtec driver. This fixes a number of sparse warnings of the form: $ make C=2 drivers/pci/switch/ drivers/pci/switch/switchtec.c:... incorrect type in ... (different address spaces) Fixes: 52eabba5bcdb ("switchtec: Add IOCTLs to the Switchtec driver") Link: https://lore.kernel.org/r/20200728192434.18993-1-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-30PCI: rpadlpar: Make functions staticWei Yongjun
The sparse tool report build warnings as follows: drivers/pci/hotplug/rpadlpar_core.c:355:5: warning: symbol 'dlpar_remove_pci_slot' was not declared. Should it be static? drivers/pci/hotplug/rpadlpar_core.c:461:12: warning: symbol 'rpadlpar_io_init' was not declared. Should it be static? drivers/pci/hotplug/rpadlpar_core.c:473:6: warning: symbol 'rpadlpar_io_exit' was not declared. Should it be static? Those functions are not used outside of this file, so mark them static. Also mark rpadlpar_io_exit() as __exit. Link: https://lore.kernel.org/r/20200721151735.41181-1-weiyongjun1@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-30PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUsLogan Gunthorpe
Allow P2PDMA if the CPU vendor is AMD and family is 0x17 (Zen) or greater. [bhelgaas: commit log, simplify #if/#else/#endif] Link: https://lore.kernel.org/r/20200729231844.4653-1-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com>
2020-07-29PCI: Release IVRS table in AMD ACS quirkHanjun Guo
The acpi_get_table() should be coupled with acpi_put_table() if the mapped table is not used at runtime to release the table mapping. In pci_quirk_amd_sb_acs(), IVRS table is just used for checking AMD IOMMU is supported, not used at runtime, so put the table after using it. Fixes: 15b100dfd1c9 ("PCI: Claim ACS support for AMD southbridge devices") Link: https://lore.kernel.org/r/1595411068-15440-1-git-send-email-guohanjun@huawei.com Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-29PCI: Announce device after early fixupsTiezhu Yang
Announce the device, e.g., pci 0000:00:00.0: [8086:5910] type 00 class 0x060000 after running early fixups, so the log message reflects any device type or class code fixups. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1595833615-8049-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-29PCI: Mark AMD Navi10 GPU rev 0x00 ATS as brokenKai-Heng Feng
We are seeing AMD Radeon Pro W5700 doesn't work when IOMMU is enabled: iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01a0] iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01c0] The error also makes graphics driver fail to probe the device. It appears to be the same issue as commit 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") addresses, and indeed the same ATS quirk can workaround the issue. See-also: 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") See-also: d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") See-also: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208725 Link: https://lore.kernel.org/r/20200728104554.28927-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-29PCI: Remove unused pci_lost_interrupt()Heiner Kallweit
388c8c16abaf ("PCI: add routines for debugging and handling lost interrupts") added pci_lost_interrupt() that apparently never has had a single user. Remove it. Link: https://lore.kernel.org/r/e328d059-3068-6a40-28df-f81f616d15a0@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-28dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoCKishon Vijay Abraham I
Add PCIe EP mode dt-bindings for TI's J721E SoC. Link: https://lore.kernel.org/r/20200722110317.4744-13-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-07-28dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoCKishon Vijay Abraham I
Add host mode dt-bindings for TI's J721E SoC. Link: https://lore.kernel.org/r/20200722110317.4744-12-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-07-28PCI: cadence: Add MSI-X support to Endpoint driverAlan Douglas
Implement ->set_msix() and ->get_msix() callback functions in order to configure MSIX capability in the PCIe endpoint controller. Add cdns_pcie_ep_send_msix_irq() to send MSIX interrupts to Host. cdns_pcie_ep_send_msix_irq() gets the MSIX table address (virtual address) from "struct cdns_pcie_epf" that gets initialized in ->set_bar() call back function. [kishon@ti.com: Re-implement MSIX support in accordance with the re-designed core MSI-X interfaces] Link: https://lore.kernel.org/r/20200722110317.4744-11-kishon@ti.com Signed-off-by: Alan Douglas <adouglas@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-07-28PCI: hv: Make some functions staticWei Yongjun
sparse report build warning as follows: drivers/pci/controller/pci-hyperv.c:941:5: warning: symbol 'hv_read_config_block' was not declared. Should it be static? drivers/pci/controller/pci-hyperv.c:1021:5: warning: symbol 'hv_write_config_block' was not declared. Should it be static? drivers/pci/controller/pci-hyperv.c:1090:5: warning: symbol 'hv_register_block_invalidate' was not declared. Should it be static? Those functions are not used outside of this file, so mark them static. Link: https://lore.kernel.org/r/20200706135234.80758-1-weiyongjun1@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-07-27PCI: dwc: hisi: Remove non-ECAM HiSilicon hip05/hip06 driverRob Herring
The HiSilicon non-ECAM PCIe has been broken since March 2016 commit 7e57fd1444bf ("PCI: designware: Move Root Complex setup code to dw_pcie_setup_rc()"). The reason is this commit moved the iATU setup code from dw_pcie_host_init() to dw_pcie_setup_rc(), but the hisi driver never calls dw_pcie_setup_rc(). The result is the PCI memory space is never configured and the driver can't work. It's also clear it has an iATU as the config space accesses use it. There's also no dts file using either "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie". Link: https://lore.kernel.org/r/20200724224204.3249055-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-07-27PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID registerKishon Vijay Abraham I
Commit 1b79c5284439 ("PCI: cadence: Add host driver for Cadence PCIe controller") in order to update Vendor ID, directly wrote to PCI_VENDOR_ID register. However PCI_VENDOR_ID in root port configuration space is read-only register and writing to it will have no effect. Use local management register to configure Vendor ID and Subsystem Vendor ID. Link: https://lore.kernel.org/r/20200722110317.4744-10-kishon@ti.com Fixes: 1b79c5284439 ("PCI: cadence: Add host driver for Cadence PCIe controller") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-07-27PCI: cadence: Add new *ops* for CPU addr fixupKishon Vijay Abraham I
Cadence driver uses "mem" memory resource to obtain the offset of configuration space address region, memory space address region and message space address region. The obtained offset is used to program the Address Translation Unit (ATU). However certain platforms like TI's J721E SoC require the absolute address to be programmed in the ATU and not just the offset. Add new *ops* for CPU addr fixup for the platform drivers to provide the correct address to be programmed in the ATU. Link: https://lore.kernel.org/r/20200722110317.4744-9-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-07-27dt-bindings: PCI: cadence: Remove "mem" from reg bindingKishon Vijay Abraham I
"mem" is not a memory resource and it overlaps with PCIe config space and memory region. Remove "mem" from reg binding. Link: https://lore.kernel.org/r/20200722110317.4744-8-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-07-27PCI: cadence: Allow pci_host_bridge to have custom pci_opsKishon Vijay Abraham I
Certain platforms like TI's J721E allows only 32-bit configuration space access. In such cases pci_generic_config_read and pci_generic_config_write cannot be used. Add support in Cadence core to let pci_host_bridge have custom pci_ops. Link: https://lore.kernel.org/r/20200722110317.4744-7-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-07-27PCI: cadence: Add support to start link and verify link statusKishon Vijay Abraham I
Add cdns_pcie_ops to start link and verify link status. The registers to start link and to check link status is in Platform specific PCIe wrapper. Add support for platform specific drivers to add callback functions for the PCIe Cadence core to start link and verify link status. Link: https://lore.kernel.org/r/20200722110317.4744-6-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-07-27PCI: cadence: Convert all r/w accessors to perform only 32-bit accessesKishon Vijay Abraham I
Certain platforms like TI's J721E using Cadence PCIe IP can perform only 32-bit accesses for reading or writing to Cadence registers. Convert all read and write accesses to 32-bit in Cadence PCIe driver in preparation for adding PCIe support in TI's J721E SoC. Also add spin lock to disable interrupts while modifying PCI_STATUS register while raising legacy interrupt since PCI_STATUS is accessible by both remote RC and EP and time between read and write should be minimized. Link: https://lore.kernel.org/r/20200722110317.4744-5-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-07-27linux/kernel.h: Add PTR_ALIGN_DOWN macroKishon Vijay Abraham I
Add a macro for aligning down a pointer. This is useful to get an aligned register address when a device allows only word access and doesn't allow half word or byte access. Link: https://lore.kernel.org/r/20200722110317.4744-4-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2020-07-27PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error pathKishon Vijay Abraham I
commit bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library") while refactoring the Cadence PCIe driver to be used as library, removed pm_runtime_get_sync() from cdns_pcie_ep_setup() and cdns_pcie_host_setup() but missed to remove the corresponding pm_runtime_put_sync() in the error path. Fix it here. Link: https://lore.kernel.org/r/20200722110317.4744-3-kishon@ti.com Fixes: bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-07-27PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" propertyKishon Vijay Abraham I
Cadence PCIe core driver (host mode) uses "cdns,no-bar-match-nbits" property to configure the number of bits passed through from PCIe address to internal address in Inbound Address Translation register. This only used the NO MATCH BAR. However standard PCI dt-binding already defines "dma-ranges" to describe the address ranges accessible by PCIe controller. Add support in Cadence PCIe host driver to parse dma-ranges and configure the inbound regions for BAR0, BAR1 and NO MATCH BAR. Cadence IP specifies maximum size for BAR0 as 256GB, maximum size for BAR1 as 2 GB. This adds support to take the next biggest region in "dma-ranges" and find the smallest BAR that each of the regions fit in and if there is no BAR big enough to hold the region, split the region to see if it can be fitted using multiple BARs. "dma-ranges" of J721E will be dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; Since there is no BAR which can hold 2^48 size, NO_MATCH_BAR will be used here. Legacy device tree binding compatibility is maintained by retaining support for "cdns,no-bar-match-nbits". Link: https://lore.kernel.org/r/20200722110317.4744-2-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-07-27PCI: hv: Fix a timing issue which causes kdump to fail occasionallyWei Hu
Kdump could fail sometime on Hyper-V guest because the retry in hv_pci_enter_d0() releases child device structures in hv_pci_bus_exit(). Although there is a second asynchronous device relations message sending from the host, if this message arrives to the guest after hv_send_resource_allocated() is called, the retry would fail. Fix the problem by moving retry to hv_pci_probe() and start the retry from hv_pci_query_relations() call. This will cause a device relations message to arrive to the guest synchronously; the guest would then be able to rebuild the child device structures before calling hv_send_resource_allocated(). Link: https://lore.kernel.org/r/20200727071731.18516-1-weh@microsoft.com Fixes: c81992e7f4aa ("PCI: hv: Retry PCI bus D0 entry on invalid device state") Signed-off-by: Wei Hu <weh@microsoft.com> [lorenzo.pieralisi@arm.com: fixed a comment and commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com>
2020-07-24PCI/ATS: Add pci_pri_supported() to check device or associated PFAshok Raj
For SR-IOV, the PF PRI is shared between the PF and any associated VFs, and the PRI Capability is allowed for PFs but not for VFs. Searching for the PRI Capability on a VF always fails, even if its associated PF supports PRI. Add pci_pri_supported() to check whether device or its associated PF supports PRI. [bhelgaas: commit log, avoid "!!"] Fixes: b16d0cb9e2fc ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS") Link: https://lore.kernel.org/r/1595543849-19692-1-git-send-email-ashok.raj@intel.com Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: stable@vger.kernel.org # v4.4+
2020-07-24xen: Remove redundant initialization of irqColin Ian King
The variable irq is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20200611123134.922395-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-22PCI/ERR: Clear PCIe Device Status errors only if OS owns AERJonathan Cameron
pcie_clear_device_status() resets the error bits in the PCIe Device Status Register (PCI_EXP_DEVSTA). Previously we did this unconditionally, but on ACPI systems, the _OSC AER bit negotiates control of the AER capability. Per sec 4.5.1 of the System Firmware Intermediary _OSC and DPC Updates ECN [1], this bit also covers other error enable/status bits including the following: Correctable Error Reporting Enable Non-Fatal Error Reporting Enable Fatal Error Reporting Enable Unsupported Request Reporting Enable These bits are all in the PCIe Device Control register (the ECN omitted "Reporting", but I think that's a typo), so by implication the _OSC AER bit also applies to the error status bits in the PCIe Device Status register: Correctable Error Detected Non-Fatal Error Detected Fatal Error Detected Unsupported Request Detected Clear the PCIe Device Status error bits only when the OS controls the AER capability and related error enable/status bits. If platform firmware controls the AER capability, firmware is responsible for clearing these bits. One call path leading here is: ghes_do_proc ghes_handle_aer aer_recover_queue schedule_work(&aer_recover_work) ... aer_recover_work_func pcie_do_recovery pcie_clear_device_status [1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24, 2020, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/14076 [bhelgaas: commit log, move test from pcie_clear_device_status() to callers] Link: https://lore.kernel.org/r/20200622113523.891666-1-Jonathan.Cameron@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-22PCI/ERR: Rename pci_aer_clear_device_status() to pcie_clear_device_status()Bjorn Helgaas
pci_aer_clear_device_status() clears the error bits in the PCIe Device Status Register (PCI_EXP_DEVSTA). Every PCIe device has this register, regardless of whether it supports AER. Rename pci_aer_clear_device_status() to pcie_clear_device_status() to make clear that it is PCIe-specific but not AER-specific. Move it to drivers/pci/pci.c, again since it's not AER-specific. No functional change intended. Link: https://lore.kernel.org/r/20200717195619.766662-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-21PCI: aardvark: Don't touch PCIe registers if no card connectedPali Rohár
When there is no PCIe card connected and advk_pcie_rd_conf() or advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated root bridge, the aardvark driver throws the following error message: advk-pcie d0070000.pcie: config read/write timed out Obviously accessing PCIe registers of disconnected card is not possible. Extend check in advk_pcie_valid_device() function for validating availability of PCIe bus. If PCIe link is down, then the device is marked as Not Found and the driver does not try to access these registers. This is just an optimization to prevent accessing PCIe registers when card is disconnected. Trying to access PCIe registers of disconnected card does not cause any crash, kernel just needs to wait for a timeout. So if card disappear immediately after checking for PCIe link (before accessing PCIe registers), it does not cause any problems. Link: https://lore.kernel.org/r/20200702083036.12230-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-07-20PCI: loongson: Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk()Tiezhu Yang
According to the datasheet of Loongson LS7A bridge chip, the old version of Loongson LS7A PCIE port has a wrong value about PCI class which is 0x060000, the correct value should be 0x060400, this bug can be fixed by "dev->class = PCI_CLASS_BRIDGE_PCI << 8;" at the software level and it was fixed in hardware in the latest LS7A versions. In order to maintain downward compatibility, use DECLARE_PCI_FIXUP_EARLY instead of DECLARE_PCI_FIXUP_HEADER for bridge_class_quirk() to fix it as early as possible. Otherwise, in the function pci_setup_device(), the related code about "dev->class" such as "class = dev->class >> 8;" and "dev->transparent = ((dev->class & 0xff) == 1);" maybe get wrong value without EARLY fixup. Link: https://lore.kernel.org/r/1595065176-460-1-git-send-email-yangtiezhu@loongson.cn Fixes: 1f58cca5cf2b ("PCI: Add Loongson PCI Controller support") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-07-17PCI/ASPM: Add missing newline in sysfs 'policy'Xiongfeng Wang
When I cat ASPM parameter 'policy' by sysfs, it displays as follows. Add a newline for easy reading. Other sysfs attributes already include a newline. [root@localhost ~]# cat /sys/module/pcie_aspm/parameters/policy [default] performance powersave powersupersave [root@localhost ~]# Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/1594972765-10404-1-git-send-email-wangxiongfeng2@huawei.com Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-17PCI: dwc: Convert to devm_platform_ioremap_resource_byname()Dejin Zheng
Use devm_platform_ioremap_resource_byname() to simplify the code since it contains platform_get_resource_byname() and devm_ioremap_resource() respectively. Link: https://lore.kernel.org/r/20200708164013.5076-1-zhengdejin5@gmail.com Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-07-10PCI: Fix pci_create_slot() reference count leakQiushi Wu
kobject_init_and_add() takes a reference even when it fails. If it returns an error, kobject_put() must be called to clean up the memory associated with the object. When kobject_init_and_add() fails, call kobject_put() instead of kfree(). b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") fixed a similar problem. Link: https://lore.kernel.org/r/20200528021322.1984-1-wu000273@umn.edu Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-10PCI: Treat "external-facing" devices themselves as internalRajat Jain
"External-facing" devices are internal devices that expose PCIe hierarchies such as Thunderbolt outside the platform [1]. Previously these internal devices were marked as "untrusted" the same as devices downstream from them. Use the ACPI or DT information to identify external-facing devices, but only mark the devices *downstream* from them as "untrusted" [2]. The external-facing device itself is no longer marked as untrusted. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-externally-exposed-pcie-root-ports [2] https://lore.kernel.org/linux-pci/20200610230906.GA1528594@bjorn-Precision-5520/ Link: https://lore.kernel.org/r/20200707224604.3737893-3-rajatja@google.com Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 22:31:06 +0000