| Age | Commit message (Collapse) | Author |
|---|
|
Change VMBus channels macro (VRSS_CHANNEL_DEFAULT) in
Linux netvsc from 8 to 16 to align with Azure Windows VM
and improve networking throughput.
For VMs having less than 16 vCPUS, the channels depend
on number of vCPUs. For greater than 16 vCPUs,
set the channels to maximum of VRSS_CHANNEL_DEFAULT and
number of physical cores / 2 which is returned by
netif_get_num_default_rss_queues() as a way to optimize CPU
resource utilization and scale for high-end processors with
many cores.
Maximum number of channels are by default set to 64.
Based on this change the channel creation would change as follows:
-----------------------------------------------------------------
| No. of vCPU | dev_info->num_chn | channels created |
-----------------------------------------------------------------
| 1-16 | 16 | vCPU |
| >16 | max(16,#cores/2) | min(64 , max(16,#cores/2)) |
-----------------------------------------------------------------
Performance tests showed significant improvement in throughput:
- 0.54% for 16 vCPUs
- 0.83% for 32 vCPUs
- 0.86% for 48 vCPUs
- 9.72% for 64 vCPUs
- 13.57% for 96 vCPUs
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/1724735791-22815-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethtool of this driver uses the phy API of ethtool
to get the link information from PHY driver.
Because the NC-SI is forced on 100Mbps and full duplex,
the driver connect a fixed-link phy driver for NC-SI.
The ethtool will get the link information from the
fixed-link phy driver.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240827030513.481469-1-jacky_chou@aspeedtech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
tcp: take better care of tw_substate and tw_rcv_nxt
While reviewing Jason Xing recent commit (0d9e5df4a257 "tcp: avoid reusing
FIN_WAIT2 when trying to find port in connect() process") I saw
we could remove the volatile qualifier for tw_substate field,
and I also added missing data-race annotations around tcptw->tw_rcv_nxt.
====================
Link: https://patch.msgid.link/20240827015250.3509197-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No lock protects tcp tw fields.
tcptw->tw_rcv_nxt can be changed from twsk_rcv_nxt_update()
while other threads might read this field.
Add READ_ONCE()/WRITE_ONCE() annotations, and make sure
tcp_timewait_state_process() reads tcptw->tw_rcv_nxt only once.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20240827015250.3509197-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using a volatile qualifier for a specific struct field is unusual.
Use instead READ_ONCE()/WRITE_ONCE() where necessary.
tcp_timewait_state_process() can change tw_substate while other
threads are reading this field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20240827015250.3509197-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During the list_for_each_entry_rcu iteration call of xenvif_flush_hash,
kfree_rcu does not exist inside the rcu read critical section, so if
kfree_rcu is called when the rcu grace period ends during the iteration,
UAF occurs when accessing head->next after the entry becomes free.
Therefore, to solve this, you need to change it to list_for_each_entry_safe.
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://patch.msgid.link/20240822181109.2577354-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-26 (ice)
This series contains updates to ice driver only.
Jake implements and uses rd32_poll_timeout to replace a jiffies loop for
calling ice_sq_done. The rd32_poll_timeout() function is designed to allow
simplifying other places in the driver where we need to read a register
until it matches a known value.
Jake, Bruce, and Przemek update ice_debug_cq() to be more robust, and more
useful for tracing control queue messages sent and received by the device
driver.
Jake rewords several commands in the ice_control.c file which previously
referred to the "Admin queue" when they were actually generic functions
usable on any control queue.
Jake removes the unused and unnecessary cmd_buf array allocation for send
queues. This logic originally was going to be useful if we ever implemented
asynchronous completion of transmit messages. This support is unlikely to
materialize, so the overhead of allocating a command buffer is unnecessary.
Sergey improves the log messages when the ice driver reports that the NVM
version on the device is not supported by the driver. Now, these messages
include both the discovered NVM version and the requested/expected NVM
version.
Aleksandr Mishin corrects overallocation of memory related to adding
scheduler nodes.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Adjust over allocation of memory in ice_sched_add_root_node() and ice_sched_add_node()
ice: Report NVM version numbers on mismatch during load
ice: remove unnecessary control queue cmd_buf arrays
ice: reword comments referring to control queues
ice: stop intermixing AQ commands/responses debug dumps
ice: do not clutter debug logs with unused data
ice: improve debug print for control queue messages
ice: implement and use rd32_poll_timeout for ice_sq_done timeout
====================
Link: https://patch.msgid.link/20240826224655.133847-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tristram Ha says:
====================
net: dsa: microchip: Add KSZ8895/KSZ8864 switch support
This series of patches is to add KSZ8895/KSZ8864 switch support to the
KSZ DSA driver.
====================
Link: https://patch.msgid.link/BYAPR11MB3558B8A089C88DFFFC09B067EC8B2@BYAPR11MB3558.namprd11.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8895/KSZ8864 is a switch family between KSZ8863/73 and KSZ8795, so it
shares some registers and functions in those switches already
implemented in the KSZ DSA driver.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Tested-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8895/KSZ8864 is a switch family developed before KSZ8795 and after
KSZ8863, so it shares some registers and functions in those switches.
KSZ8895 has 5 ports and so is more similar to KSZ8795.
KSZ8864 is a 4-port version of KSZ8895. The first port is removed
while port 5 remains as a host port.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/BYAPR11MB3558FD0717772263FAD86846EC8B2@BYAPR11MB3558.namprd11.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace fput() with sockfd_put() in handshake_nl_done_doit().
Signed-off-by: A K M Fazla Mehrab <a.mehrab@bytedance.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20240826182652.2449359-1-a.mehrab@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the values of WQs for RX and TX queues for MANA devices
are hardcoded to default sizes.
Allow configuring these values for MANA devices as ringparam
configuration(get/set) through ethtool_ops.
Pre-allocate buffers at the beginning of this operation, to
prevent complete network loss in low-memory conditions.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://patch.msgid.link/1724688461-12203-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit introduces MDI-X configuration support in vsc73xx phys.
Vsc73xx supports only auto mode or forced MDI.
Vsc73xx have auto MDI-X disabled by default in forced speed mode.
This commit enables it.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240826093710.511837-1-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Liao Chen says:
====================
net: fix module autoloading
This patchset aims to enable autoloading of some net modules.
By registering MDT, the kernel is allowed to automatically bind
modules to devices that match the specified compatible strings.
====================
Link: https://patch.msgid.link/20240826091858.369910-1-liaochen4@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240826091858.369910-4-liaochen4@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826091858.369910-3-liaochen4@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826091858.369910-2-liaochen4@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PCI core API pci_dev_id() can be used to get the BDF number for a PCI
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240826012100.3975175-1-liaoyu15@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, of_get_ethdev_address() return is checked for any return error
code which means that trying to get the MAC from NVMEM cells that is backed
by MTD will fail if it was not probed before ag71xx.
So, lets check the return error code for EPROBE_DEFER and defer the ag71xx
probe in that case until the underlying NVMEM device is live.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240824200249.137209-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit da15c78b5664 ("liquidio CN23XX: VF register access") declared
cn23xx_dump_vf_initialized_regs() but never implemented it.
octeon_dump_soft_command() is never implemented and used since introduction in
commit 35878618c92d ("liquidio: Added delayed work for periodically updating
the link statistics.").
And finally, a few other declarations were never implenmented since introduction
in commit f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240824083107.3639602-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 4863dea3fab0 ("net: Adding support for Cavium ThunderX network
controller") declared nicvf_qset_reg_{write,read}() but never implemented.
Commit 4863dea3fab0 ("net: Adding support for Cavium ThunderX network
controller") declared bgx_add_dmac_addr() but no implementation.
After commit 5fc7cf179449 ("net: thunderx: Cleanup PHY probing code.")
octeon_mdiobus_force_mod_depencency() is not used any more.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240824082754.3637963-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dmitry Safonov via says:
====================
net/selftests: TCP-AO selftests updates
First 3 patches are more-or-less cleanups/preparations.
Patches 4/5 are fixes for netns file descriptors leaks/open.
Patch 6 was sent to me/contributed off-list by Mohammad, who wants 32-bit
kernels to run TCP-AO.
Patch 7 is a workaround/fix for slow VMs. Albeit, I can't reproduce
the issue, but I hope it will fix netdev flakes for connect-deny-*
tests.
And the biggest change is adding TCP-AO tracepoints to selftests.
I think it's a good addition by the following reasons:
- The related tracepoints are now tested;
- It allows tcp-ao selftests to raise expectations on the kernel
behavior - up from the syscalls exit statuses + net counters.
- Provides tracepoints usage samples.
As tracepoints are not a stable ABI, any kernel changes done to them
will be reflected to the selftests, which also will allow users
to see how to change their code. It's quite better than parsing dmesg
(what BGP was doing pre-tracepoints, ugh).
Somewhat arguably, the code parses trace_pipe, rather than uses
libtraceevent (which any sane user should do). The reason behind that is
the same as for rt-netlink macros instead of libmnl: I'm trying
to minimize the library dependencies of the selftests. And the
performance of formatting text in kernel and parsing it again in a test
is not critical.
Current output sample:
> ok 73 Trace events matched expectations: 13 tcp_hash_md5_required[2] tcp_hash_md5_unexpected[4] tcp_hash_ao_required[3] tcp_ao_key_not_found[4]
Previously, tracepoints selftests were part of kernel tcp tracepoints
submission [1], but since then the code was quite changed:
- Now generic tracing setup is in lib/ftrace.c, separate from
lib/ftrace-tcp.c which utilizes TCP trace points. This separation
allows future selftests to trace non-TCP events, i.e. to find out
an skb's drop reason, which was useful in the creation of TCP-CLOSE
stress-test (not in this patch set, but used in attempt to reproduce
the issue from [2]).
- Another change is that in the previous submission the trace events
where used only to detect unexpected TCP-AO/TCP-MD5 events. In this
version the selftests will fail if an expected trace event didn't
appear.
Let's see how reliable this is on the netdev bot - it obviously passes
on my testing, but potentially may require a temporary XFAIL patch
if it misbehaves on a slow VM.
[1] https://lore.kernel.org/lkml/20240224-tcp-ao-tracepoints-v1-0-15f31b7f30a7@arista.com/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=33700a0c9b56
v3: https://lore.kernel.org/20240815-tcp-ao-selftests-upd-6-12-v3-0-7bd2e22bb81c@gmail.com
v2: https://lore.kernel.org/20240802-tcp-ao-selftests-upd-6-12-v2-0-370c99358161@gmail.com
v1: https://lore.kernel.org/20240730-tcp-ao-selftests-upd-6-12-v1-0-ffd4bf15d638@gmail.com
====================
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-0-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Setup trace points, add a new ftrace instance in order to not interfere
with the rest of the system, filtering by net namespace cookies.
Raise a new background thread that parses trace_pipe, matches them with
the list of expected events.
Wiring up trace events to selftests provides another insight if there is
anything unexpected happining in the tcp-ao code (i.e. key rotation when
it's not expected).
Note: in real programs libtraceevent should be used instead of this
manual labor of setting ftrace up and parsing. I'm not using it here
as I don't want to have an .so library dependency that one would have to
bring into VM or DUT (Device Under Test). Please, don't copy it over
into any real world programs, that aren't tests.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-8-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On tests that are expecting failure the timeout value is
TEST_RETRANSMIT_SEC == 1 second. Which is big enough for most of devices
under tests. But on a particularly slow machine/VM, 1 second might be
not enough for another thread to be scheduled and attempt to connect().
It is not a problem for tests that expect connect() to succeed as
the timeout value for them (TEST_TIMEOUT_SEC) is intentionally bigger.
One obvious way to solve this would be to increase TEST_RETRANSMIT_SEC.
But as all tests would increase the timeouts, that's going to sum up.
But here is less obvious way that keeps timeouts for expected connect()
failures low: just synchronize the two threads, which will assure that
before counter checks the other thread got a chance to run and timeout
on connect(). The expected increase of the related counter for listen()
socket will yet test the expected failure.
Never happens on my machine, but I suppose the majority of netdev's
connect-deny-* flakes [1] are caused by this.
Prevents the following testing issue:
> # selftests: net/tcp_ao: connect-deny_ipv6
> # 1..21
> # # 462[lib/setup.c:243] rand seed 1720905426
> # TAP version 13
> # ok 1 Non-AO server + AO client
> # not ok 2 Non-AO server + AO client: TCPAOKeyNotFound counter did not increase: 0 <= 0
> # ok 3 AO server + Non-AO client
> # ok 4 AO server + Non-AO client: counter TCPAORequired increased 0 => 1
...
[1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao/results/681741/6-connect-deny-ipv6/stdout
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-7-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's not safe to use '%zu' specifier for printing uint64_t on 32-bit
systems. For uint64_t, we should use the 'PRIu64' macro from
the inttypes.h library. This ensures that the uint64_t is printed
correctly from the selftests regardless of the system architecture.
Signed-off-by: Mohammad Nassiri <mnassiri@ciena.com>
[Added missing spaces in fail/ok messages and uint64_t cast in
setsockopt-closed, as otherwise it was giving warnings on 64bit.
And carried it to netdev ml]
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-6-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The switch_save_ns() helper suppose to help switching to another
namespace for some action and to return back to original namespace.
The fd should be closed.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-5-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It turns to be that open_netns() is called rarely from the child-thread
and more often from parent-thread. Yet, on initialization of kconfig
checks, either of threads may reach kconfig_lock mutex first.
VRF-related checks do create a temporary ksft-check VRF in
an unshare()'d namespace and than setns() back to the original.
As original was opened from "/proc/self/ns/net", it's valid for
thread-leader (parent), but it's invalid for the child, resulting
in the following failure on tests that check has_vrfs() support:
> # ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service
> # not ok 55 # error 381[unsigned-md5.c:24] Failed to add a VRF: -17
> # not ok 56 # error 383[unsigned-md5.c:33] Failed to add a route to VRF: -22: Key was rejected by service
> not ok 1 selftests: net/tcp_ao: unsigned-md5_ipv6 # exit=1
Use "/proc/thread-self/ns/net" which is valid for any thread.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-4-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most of the functions in tcp-ao lib/ return negative errno or -1 in case
of a failure. That creates inconsistencies in lib/kconfig, which saves
what was the error code. As well as the uninitialized kconfig value is
-1, which also may be the result of a check.
Define KCONFIG_UNKNOWN and save negative return code, rather than
libc-style errno.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-3-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of pre-allocating a fixed-sized buffer of TEST_MSG_BUFFER_SIZE
and printing into it, call vsnprintf() with str = NULL, which will
return the needed size of the buffer. This hack is documented in
man 3 vsnprintf.
Essentially, in C++ terms, it re-invents std::stringstream, which is
going to be used to print different tracing paths and formatted strings.
Use it straight away in __test_print() - which is thread-safe version of
printing in selftests.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-2-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct copy'n'paste typo: the previous line already initialises get_all
to 1.
Reported-by: Nassiri, Mohammad <mnassiri@ciena.com>
Closes: https://lore.kernel.org/all/DM6PR04MB4202BC58A9FD5BDD24A16E8EC56F2@DM6PR04MB4202.namprd04.prod.outlook.com/
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20240823-tcp-ao-selftests-upd-6-12-v4-1-05623636fe8c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent commit fc7ec7f554d7 ("l2tp: delete sessions using work queue")
incorrectly uses drain_workqueue. The use of drain_workqueue in
l2tp_pre_exit_net is flawed because the workqueue is shared by all
nets and it is therefore possible for new work items to be queued
for other nets while drain_workqueue runs.
Instead of using drain_workqueue, use __flush_workqueue twice. The
first one will run all tunnel delete work items and any work already
queued. When tunnel delete work items are run, they may queue
new session delete work items, which the second __flush_workqueue will
run.
In l2tp_exit_net, warn if any of the net's idr lists are not empty.
Fixes: fc7ec7f554d7 ("l2tp: delete sessions using work queue")
Signed-off-by: James Chapman <jchapman@katalix.com>
Link: https://patch.msgid.link/20240823142257.692667-1-jchapman@katalix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Detlev Casanova says:
====================
Add GMAC support for rk3576
Add the necessary constants and functions to support the GMAC devices on
the rk3576.
====================
Link: https://patch.msgid.link/20240823141318.51201-1-detlev.casanova@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add constants and callback functions for the dwmac on RK3576 soc.
Signed-off-by: David Wu <david.wu@rock-chips.com>
[rebase, extracted bindings]
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240823141318.51201-4-detlev.casanova@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a rockchip,rk3576-gmac compatible for supporting the 2 gmac
devices on the rk3576.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240823141318.51201-3-detlev.casanova@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix SELET -> SELECT in RK3588_GMAC_CLK_SELET_CRU and
RK3588_GMAC_CLK_SELET_IO
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240823141318.51201-2-detlev.casanova@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
suitable API
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822230550.708112-1-andy.shevchenko@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fix an unreleased lock in out_dev_put path by removing the (now)
unnecessary path.
Reported-by: syzbot+c641161e97237326ea74@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c641161e97237326ea74
Fixes: 3688ff3077d3 ("net: ethtool: cable-test: Target the command to the requested PHY")
Signed-off-by: Diogo Jahchan Koike <djahchankoike@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20240826134656.94892-1-djahchankoike@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Boris Sukholitko says:
====================
tc: adjust network header after 2nd vlan push
<tldr>
skb network header of the single-tagged vlan packet continues to point the
vlan payload (e.g. IP) after second vlan tag is pushed by tc act_vlan. This
causes problem at the dissector which expects double-tagged packet network
header to point to the inner vlan.
The fix is to adjust network header in tcf_act_vlan.c but requires
refactoring of skb_vlan_push function.
</tldr>
Consider the following shell script snippet configuring TC rules on the
veth interface:
ip link add veth0 type veth peer veth1
ip link set veth0 up
ip link set veth1 up
tc qdisc add dev veth0 clsact
tc filter add dev veth0 ingress pref 10 chain 0 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action goto chain 5
tc filter add dev veth0 ingress pref 20 chain 0 flower \
num_of_vlans 1 action vlan push id 100 \
protocol 0x8100 action goto chain 5
tc filter add dev veth0 ingress pref 30 chain 5 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action simple sdata "success"
Sending double-tagged vlan packet with the IP payload inside:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 64 ..........."...d
0010 81 00 00 14 08 00 45 04 00 26 04 d2 00 00 7f 11 ......E..&......
0020 18 ef 0a 00 00 01 14 00 00 02 00 00 00 00 00 12 ................
0030 e1 c7 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 10, goto rule 30 in chain 5 and correctly emit "success" to
the dmesg.
OTOH, sending single-tagged vlan packet:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 14 ..........."....
0010 08 00 45 04 00 2a 04 d2 00 00 7f 11 18 eb 0a 00 ..E..*..........
0020 00 01 14 00 00 02 00 00 00 00 00 16 e1 bf 00 00 ................
0030 00 00 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 20, will push the second vlan tag but will *not* match
rule 30. IOW, the match at rule 30 fails if the second vlan was freshly
pushed by the kernel.
Lets look at __skb_flow_dissect working on the double-tagged vlan packet.
Here is the relevant code from around net/core/flow_dissector.c:1277
copy-pasted here for convenience:
if (dissector_vlan == FLOW_DISSECTOR_KEY_MAX &&
skb && skb_vlan_tag_present(skb)) {
proto = skb->protocol;
} else {
vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
data, hlen, &_vlan);
if (!vlan) {
fdret = FLOW_DISSECT_RET_OUT_BAD;
break;
}
proto = vlan->h_vlan_encapsulated_proto;
nhoff += sizeof(*vlan);
}
The "else" clause above gets the protocol of the encapsulated packet from
the skb data at the network header location. printk debugging has showed
that in the good double-tagged packet case proto is
htons(0x800 == ETH_P_IP) as expected. However in the single-tagged packet
case proto is garbage leading to the failure to match tc filter 30.
proto is being set from the skb header pointed by nhoff parameter which is
defined at the beginning of __skb_flow_dissect
(net/core/flow_dissector.c:1055 in the current version):
nhoff = skb_network_offset(skb);
Therefore the culprit seems to be that the skb network offset is different
between double-tagged packet received from the interface and single-tagged
packet having its vlan tag pushed by TC.
Lets look at the interesting points of the lifetime of the single/double
tagged packets as they traverse our packet flow.
Both of them will start at __netif_receive_skb_core where the first vlan
tag will be stripped:
if (eth_type_vlan(skb->protocol)) {
skb = skb_vlan_untag(skb);
if (unlikely(!skb))
goto out;
}
At this stage in double-tagged case skb->data points to the second vlan tag
while in single-tagged case skb->data points to the network (eg. IP)
header.
Looking at TC vlan push action (net/sched/act_vlan.c) we have the following
code at tcf_vlan_act (interesting points are in square brackets):
if (skb_at_tc_ingress(skb))
[1] skb_push_rcsum(skb, skb->mac_len);
....
case TCA_VLAN_ACT_PUSH:
err = skb_vlan_push(skb, p->tcfv_push_proto, p->tcfv_push_vid |
(p->tcfv_push_prio << VLAN_PRIO_SHIFT),
0);
if (err)
goto drop;
break;
....
out:
if (skb_at_tc_ingress(skb))
[3] skb_pull_rcsum(skb, skb->mac_len);
And skb_vlan_push (net/core/skbuff.c:6204) function does:
err = __vlan_insert_tag(skb, skb->vlan_proto,
skb_vlan_tag_get(skb));
if (err)
return err;
skb->protocol = skb->vlan_proto;
[2] skb->mac_len += VLAN_HLEN;
in the case of pushing the second tag. Lets look at what happens with
skb->data of the single-tagged packet at each of the above points:
1. As a result of the skb_push_rcsum, skb->data is moved back to the start
of the packet.
2. First VLAN tag is moved from the skb into packet buffer, skb->mac_len is
incremented, skb->data still points to the start of the packet.
3. As a result of the skb_pull_rcsum, skb->data is moved forward by the
modified skb->mac_len, thus pointing to the network header again.
Then __skb_flow_dissect will get confused by having double-tagged vlan
packet with the skb->data at the network header.
The solution for the bug is to preserve "skb->data at second vlan header"
semantics in the skb_vlan_push function. We do this by manipulating
skb->network_header rather than skb->mac_len. skb_vlan_push callers are
updated to do skb_reset_mac_len.
More about the patch series:
* patch 1 fixes skb_vlan_push and the callers
* patch 2 adds ingress tc_actions test
* patch 3 adds egress tc_actions test
====================
Link: https://patch.msgid.link/20240822103510.468293-1-boris.sukholitko@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add new test checking the correctness of inner vlan flushing to the skb
data when outer vlan tag is added through act_vlan on egress.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add new test checking the correctness of inner vlan flushing to the skb
data when outer vlan tag is added through act_vlan on ingress.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
<tldr>
skb network header of the single-tagged vlan packet continues to point the
vlan payload (e.g. IP) after second vlan tag is pushed by tc act_vlan. This
causes problem at the dissector which expects double-tagged packet network
header to point to the inner vlan.
The fix is to adjust network header in tcf_act_vlan.c but requires
refactoring of skb_vlan_push function.
</tldr>
Consider the following shell script snippet configuring TC rules on the
veth interface:
ip link add veth0 type veth peer veth1
ip link set veth0 up
ip link set veth1 up
tc qdisc add dev veth0 clsact
tc filter add dev veth0 ingress pref 10 chain 0 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action goto chain 5
tc filter add dev veth0 ingress pref 20 chain 0 flower \
num_of_vlans 1 action vlan push id 100 \
protocol 0x8100 action goto chain 5
tc filter add dev veth0 ingress pref 30 chain 5 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action simple sdata "success"
Sending double-tagged vlan packet with the IP payload inside:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 64 ..........."...d
0010 81 00 00 14 08 00 45 04 00 26 04 d2 00 00 7f 11 ......E..&......
0020 18 ef 0a 00 00 01 14 00 00 02 00 00 00 00 00 12 ................
0030 e1 c7 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 10, goto rule 30 in chain 5 and correctly emit "success" to
the dmesg.
OTOH, sending single-tagged vlan packet:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 14 ..........."....
0010 08 00 45 04 00 2a 04 d2 00 00 7f 11 18 eb 0a 00 ..E..*..........
0020 00 01 14 00 00 02 00 00 00 00 00 16 e1 bf 00 00 ................
0030 00 00 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 20, will push the second vlan tag but will *not* match
rule 30. IOW, the match at rule 30 fails if the second vlan was freshly
pushed by the kernel.
Lets look at __skb_flow_dissect working on the double-tagged vlan packet.
Here is the relevant code from around net/core/flow_dissector.c:1277
copy-pasted here for convenience:
if (dissector_vlan == FLOW_DISSECTOR_KEY_MAX &&
skb && skb_vlan_tag_present(skb)) {
proto = skb->protocol;
} else {
vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
data, hlen, &_vlan);
if (!vlan) {
fdret = FLOW_DISSECT_RET_OUT_BAD;
break;
}
proto = vlan->h_vlan_encapsulated_proto;
nhoff += sizeof(*vlan);
}
The "else" clause above gets the protocol of the encapsulated packet from
the skb data at the network header location. printk debugging has showed
that in the good double-tagged packet case proto is
htons(0x800 == ETH_P_IP) as expected. However in the single-tagged packet
case proto is garbage leading to the failure to match tc filter 30.
proto is being set from the skb header pointed by nhoff parameter which is
defined at the beginning of __skb_flow_dissect
(net/core/flow_dissector.c:1055 in the current version):
nhoff = skb_network_offset(skb);
Therefore the culprit seems to be that the skb network offset is different
between double-tagged packet received from the interface and single-tagged
packet having its vlan tag pushed by TC.
Lets look at the interesting points of the lifetime of the single/double
tagged packets as they traverse our packet flow.
Both of them will start at __netif_receive_skb_core where the first vlan
tag will be stripped:
if (eth_type_vlan(skb->protocol)) {
skb = skb_vlan_untag(skb);
if (unlikely(!skb))
goto out;
}
At this stage in double-tagged case skb->data points to the second vlan tag
while in single-tagged case skb->data points to the network (eg. IP)
header.
Looking at TC vlan push action (net/sched/act_vlan.c) we have the following
code at tcf_vlan_act (interesting points are in square brackets):
if (skb_at_tc_ingress(skb))
[1] skb_push_rcsum(skb, skb->mac_len);
....
case TCA_VLAN_ACT_PUSH:
err = skb_vlan_push(skb, p->tcfv_push_proto, p->tcfv_push_vid |
(p->tcfv_push_prio << VLAN_PRIO_SHIFT),
0);
if (err)
goto drop;
break;
....
out:
if (skb_at_tc_ingress(skb))
[3] skb_pull_rcsum(skb, skb->mac_len);
And skb_vlan_push (net/core/skbuff.c:6204) function does:
err = __vlan_insert_tag(skb, skb->vlan_proto,
skb_vlan_tag_get(skb));
if (err)
return err;
skb->protocol = skb->vlan_proto;
[2] skb->mac_len += VLAN_HLEN;
in the case of pushing the second tag. Lets look at what happens with
skb->data of the single-tagged packet at each of the above points:
1. As a result of the skb_push_rcsum, skb->data is moved back to the start
of the packet.
2. First VLAN tag is moved from the skb into packet buffer, skb->mac_len is
incremented, skb->data still points to the start of the packet.
3. As a result of the skb_pull_rcsum, skb->data is moved forward by the
modified skb->mac_len, thus pointing to the network header again.
Then __skb_flow_dissect will get confused by having double-tagged vlan
packet with the skb->data at the network header.
The solution for the bug is to preserve "skb->data at second vlan header"
semantics in the skb_vlan_push function. We do this by manipulating
skb->network_header rather than skb->mac_len. skb_vlan_push callers are
updated to do skb_reset_mac_len.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Arkadiusz Kubalewski says:
====================
Add Embedded SYNC feature for a dpll's pin
Introduce and allow DPLL subsystem users to get/set capabilities of
Embedded SYNC on a dpll's pin.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
====================
Link: https://patch.msgid.link/20240822222513.255179-1-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow the user to get and set configuration of Embedded SYNC feature
on the ice driver dpll pins.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20240822222513.255179-3-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement and document new pin attributes for providing Embedded SYNC
capabilities to the DPLL subsystem users through a netlink pin-get
do/dump messages. Allow the user to set Embedded SYNC frequency with
pin-set do netlink message.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20240822222513.255179-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the function dpaa_napi_del(), we execute the netif_napi_del()
for each cpu, which is actually a high overhead operation
because each call to netif_napi_del() contains a synchronize_net(),
i.e. an RCU operation. In fact, it is only necessary to call
__netif_napi_del and use synchronize_net() once outside of the loop.
This change is similar to commit 2543a6000e593a ("gro_cells: reduce
number of synchronize_net() calls") and commit 5198d545dba8ad (" net:
remove napi_hash_del() from driver-facing API") 5198d545db.
Signed-off-by: Xi Huang <xuiagnh@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240822072042.42750-1-xuiagnh@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipv6_setsockopt() can directly call ip_setsockopt()
instead of going through udp_prot.setsockopt()
ipv6_getsockopt() can directly call ip_getsockopt()
instead of going through udp_prot.getsockopt()
These indirections predate git history, not sure why they
were there.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240823140019.3727643-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The macro sk_for_each_bound_bhash accepts a parameter
__sk, but it was not used, rather the sk2 is directly
used, so we replace the sk2 with __sk in macro.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240823070453.3327832-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We found that one close-wait socket was reset by the other side
due to a new connection reusing the same port which is beyond our
expectation, so we have to investigate the underlying reason.
The following experiment is conducted in the test environment. We
limit the port range from 40000 to 40010 and delay the time to close()
after receiving a fin from the active close side, which can help us
easily reproduce like what happened in production.
Here are three connections captured by tcpdump:
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965525191
127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 2769915070
127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1
127.0.0.1.40002 > 127.0.0.1.9999: Flags [F.], seq 1, ack 1
// a few seconds later, within 60 seconds
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730
127.0.0.1.9999 > 127.0.0.1.40002: Flags [.], ack 2
127.0.0.1.40002 > 127.0.0.1.9999: Flags [R], seq 2965525193
// later, very quickly
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730
127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 3120990805
127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1
As we can see, the first flow is reset because:
1) client starts a new connection, I mean, the second one
2) client tries to find a suitable port which is a timewait socket
(its state is timewait, substate is fin_wait2)
3) client occupies that timewait port to send a SYN
4) server finds a corresponding close-wait socket in ehash table,
then replies with a challenge ack
5) client sends an RST to terminate this old close-wait socket.
I don't think the port selection algo can choose a FIN_WAIT2 socket
when we turn on tcp_tw_reuse because on the server side there
remain unread data. In some cases, if one side haven't call close() yet,
we should not consider it as expendable and treat it at will.
Even though, sometimes, the server isn't able to call close() as soon
as possible like what we expect, it can not be terminated easily,
especially due to a second unrelated connection happening.
After this patch, we can see the expected failure if we start a
connection when all the ports are occupied in fin_wait2 state:
"Ncat: Cannot assign requested address."
Reported-by: Jade Dong <jadedong@tencent.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240823001152.31004-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kyle Swenson says:
====================
net: pse-pd: tps23881: Reset GPIO support
On some boards, the TPS2388x's reset line (active low) is pulled low to
keep the chip in reset until the SoC pulls the device out of reset.
This series updates the device-tree binding for the tps23881 and then
adds support for the reset gpio handling in the tps23881 driver.
v1: https://lore.kernel.org/20240819190151.93253-1-kyle.swenson@est.tech
====================
Link: https://patch.msgid.link/20240822220100.3030184-1-kyle.swenson@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TPS23880/1 has an active-low reset pin that some boards connect to
the SoC to control when the TPS23880 is pulled out of reset.
Add support for this via a reset-gpios property in the DTS.
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240822220100.3030184-3-kyle.swenson@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
