Age | Commit message (Collapse) | Author |
|
FW had one data route for tpc0 and tpc1 when running in secured mode
and a different one when running without secured mode. After fw fixed
this issue, both mode have the same data path.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In order for the user to be aware of unexpected events in Gaudi2 that
aren't assigned to a specific engine, we are adding the handling of
this dedicated interrupt.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Replace initialization of "struct cpucp_packet" from "{0} to "{}" to
avoid a "missing braces around initializer" compilation warning.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Initialize 'index' in gaudi2_handle_qman_err() and 'offset' in
gaudi2_get_nic_idle_status() to avoid "maybe-uninitialized" compilation
warnings.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
After getting page fault in gaudi2, we need to clear the valid bit
instead of the address.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
All engine masks are exposed to user, make sure user gets the
correct rotator enabled mask in gaudi2.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Some names of events has been modified/added.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Commit 2c204f3d53218d ("accel: add dedicated minor for accelerator
devices") adds link to accelerator nodes section of DRM internals doc
(Documentation/gpu/drm-internals.rst), but the target doesn't exist.
Instead, there is only an introduction doc for computer accelerator
subsytem.
Link to that doc until there is documentation of accelerator internals.
Fixes: 2c204f3d53218d ("accel: add dedicated minor for accelerator devices")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We expose this in order for user applications to know how much dram
is reserved for internal use.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Remove all '\n' from strings which are passed as arguments to
gaudi2_print_event(), because the newline character is added internally
in this function.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Now that CQ-completion based jobs do not trigger a reset upon failure,
failure of such jobs (e.g., MMU cache invalidation) should be handled
by the caller itself depending on the error code returned to it.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Don't use padX for actual reservedX fields.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
|
|
Since the err_cause register is unprivileged, we should read it from
the driver instead of using the param that came from the FW.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
- remove reset_sleep_ms arg from functions that don't use it.
- move the call msleep(reset_sleep_ms) from btm poll to gaudi2_hw_fini
as it is called from there already for other flow.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
In hw_fini callback, we use either the cpucp packet method or polling a
register. Currently we return error only in the case of cpucp packet
failure. In this patch we also return error if polling timed out.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Due to a firmware bug we need to increase reset poll timeout
or else we will timeout in secured environments.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Engines idle state can't always be verified between changes of
engine modes (e.g., stall/halt).
For example, if a CS is inflight when altering engine's mode,
idle state will return NOT idle, always.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Copy the most up-to-date interface files to the firmware.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
This function is only called inside gaudi2.c file.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303071320.X5ouBlNY-lkp@intel.com/
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.4-2023-03-17:
amdgpu:
- Misc code cleanups
- Documentation fixes
- Make kobj structures const
- Add thermal throttling adjustments for supported APUs
- UMC RAS fixes
- Display reset fixes
- DCN 3.2 fixes
- Freesync fixes
- DC code reorg
- Generalize dmabuf import to work with KFD
- DC DML fixes
- SRIOV fixes
- UVD code cleanups
- IH 4.4.2 updates
- HDP 4.4.2 updates
- SDMA 4.4.2 updates
- PSP 13.0.6 updates
- Add capped/uncapped workload handling for supported APUs
- DCN 3.1.4 updates
- Re-org DC Kconfig
- USB4 fixes
- Reorg DC plane and stream handling
- Register vga_switcheroo for apple-gmux
- SMU 13.0.6 updates
- Fix error checking in read_mm_registers functions for affected families
- VCN 4.0.4 fix
- Drop redundant pci_enable_pcie_error_reporting() call
- RDNA2 SMU OD suspend/resume fix
- Expose additional memory stats via fdinfo
- RAS fixes
- Misc display fixes
- DP MST fixes
- IOMMU regression fix for KFD
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- NBIO fixes
- Misc code cleanups
- Fix possible double free
- Fix possible UAF
radeon:
- iMac fix
UAPI:
- KFD dmabuf export support. Required for importing KFD buffers into GEM contexts and for RDMA P2P support.
Proposed user mode changes: https://github.com/fxkamd/ROCT-Thunk-Interface/commits/fxkamd/dmabuf
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230317164416.138340-1-alexander.deucher@amd.com
|
|
static
gcc with W=1 reports
drivers/gpu/drm/nouveau/nvkm/nvfw/acr.c:49:1: error: no previous
prototype for ‘wpr_generic_header_dump’ [-Werror=missing-prototypes]
49 | wpr_generic_header_dump(struct nvkm_subdev *subdev,
| ^~~~~~~~~~~~~~~~~~~~~~~
wpr_generic_header_dump is only used in acr.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302124819.686469-1-trix@redhat.com
|
|
smatch reports
drivers/gpu/drm/nouveau/nvkm/engine/fifo/runl.c:33:18:
warning: symbol 'nvkm_engn_cgrp_get' was not declared. Should it be static?
nvkm_engn_cgrp_get is only used in runl.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228221533.3240520-1-trix@redhat.com
|
|
to static
gcc with W=1 reports
drivers/gpu/drm/nouveau/nvkm/engine/fifo/gf100.c:451:1: error:
no previous prototype for ‘gf100_fifo_nonstall_block’ [-Werror=missing-prototypes]
451 | gf100_fifo_nonstall_block(struct nvkm_event *event, int type, int index)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
gf100_fifo_nonstall_block is only used in gf100.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230303132731.1919329-1-trix@redhat.com
|
|
Check kfd->init_complete in kgd2kfd_iommu_resume, consistent with other
kgd2kfd calls. This should fix IOMMU errors on resume from suspend when
KFD IOMMU initialization failed.
Reported-by: Matt Fagnani <matt.fagnani@bell.net>
Link: https://lore.kernel.org/r/4a3b225c-2ffd-e758-4de1-447375e34cad@bell.net/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217170
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2454
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Linux regression tracking (Thorsten Leemhuis) <regressions@leemhuis.info>
Cc: stable@vger.kernel.org
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Matt Fagnani <matt.fagnani@bell.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Not needed since from vi. drop the function so
we don't duplicate code when introduce new asics.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace soc15, nv, soc21 get_rev_id callback with common
helper so we don't need to duplicate code when introduce
new asics.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace soc15, nv, soc21 specific callbacks with common
one. so we don't need to duplicate code when introduce
new asics.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_ras_register_ras_block should always be invoked
by ras_sw_init, where driver needs to check ras caps
at ip level, instead of asic level.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pcie_bif ras blocks needs to be initialized as early
as possible to handle fatal error detected in hw_init
phase. also align the pcie_bif ras sw_init with other
ras blocks
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To align with other IP blocks.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To align with other IP blocks
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Handle case when module is unloaded (kfd_exit) before a process space
(mm_struct) is released.
v2: Fixed potential race conditions by removing all kfd_process from
the process table first, then working on releasing the resources.
v3: Fixed loop element access / synchronization. Fixed extra empty lines.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along the following:
- FW Release 0.0.158.0
- Fixes to HDCP, DP MST and more
- Improvements on USB4 links and more
- Code re-architecture on link.h
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add boot control bit to control dispclk and dppclk deep sleep
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Reversed assert condition when checking that phy_pix_clk[] is not 0
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The log "DMUB HPD callback" is crucial to identify when DP tunneling
is been established and driver is notified of this event from DMUB.
Same log is shared for long and short hotplug event and we need to
check trailing DC debug log to distinguish between them two, making
debugging on DPIA related issues a bit more troublesome.
[How]
Clearly states in dmesg logs whether this is a long or short hotplug
event.
Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Make DCN32 functions available for more DCNs.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If disable the mmhub vm contexts(set MMVM_CONTEXTS_DISABLE to 0xffff),
driver loading failed on vf due to fence fallback timer expired on all rings.
FLR cannot reset MMVM_CONTEXTS_DISABLE.
So this vf can not be recovered anymore unless trigger a whole gpu reset.
[How]
Under SRIOV, init MMVM_CONTEXTS_DISABLE in gmc11 golden register setting.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Horace Chen <Horace.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For dual displays where pixel rate is much higher on one display,
we may get underflow when DET is evenly allocated.
[How]
Allocate less DET segments for the lower pixel rate display and
more DET segments for the higher pixel rate display
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Framedrops are observed while playing Vp9 and Av1 10 bit
video on 8k resolution using VSR while playback controls
are disappeared/appeared
[How]
Now ODM 2 to 1 is disabled for 5k or greater resolutions on VSR.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ayush Gupta <ayugupta@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
In USB4 DP tunneling, it's possible to have this scenario that
the path becomes unavailable and CM tears down the path a little bit late.
So, in this case, the HPD is high but fails to read any DPCD register.
That causes the link connection type to be set to sst.
And not all sinks are removed behind the MST branch.
[How]
Restore the link connection type if it fails to read DPCD register.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This is the fix for the defect of commit ab144f0b4ad6
("drm/amd/display: Allow individual control of eDP hotplug support").
[How]
To revise the default eDP hotplug setting and use the enum to git rid
of the magic number for different options.
Fixes: ab144f0b4ad6 ("drm/amd/display: Allow individual control of eDP hotplug support")
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The src/dst_pitch got mixed up during the rework of the function, make
sure the offset's refer to the correct one.
Spotted by clang:
Clang warns (or errors with CONFIG_WERROR):
drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:509:29: error: variable 'dst_pitch' is uninitialized when used here [-Werror,-Wuninitialized]
src_offset = ddirty->top * dst_pitch + ddirty->left * stdu->cpp;
^~~~~~~~~
drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:492:26: note: initialize the variable 'dst_pitch' to silence this warning
s32 src_pitch, dst_pitch;
^
= 0
1 error generated.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1811
Fixes: 39985eea5a6d ("drm/vmwgfx: Abstract placement selection")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314211445.1363828-1-zack@kde.org
|
|
Thread group id (aka pid from userspace point of view) is a more
interesting thing to show as an owner of a DRM fd, so track and show that
instead of the thread id.
In the next patch we will make the owner updated post file descriptor
handover, which will also be tgid based to avoid ping-pong when multiple
threads access the fd.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314141904.1210824-2-tvrtko.ursulin@linux.intel.com
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since
commit f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"),
the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The memory manager IDR is currently destroyed when user releases the
file descriptor.
However, at this point the user context might be still held, and memory
buffers might be still in use.
Later on, calls to release those buffers will fail due to not finding
their handles in the IDR, leading to a memory leak.
To avoid this leak, split the IDR destruction from the memory manager
fini, and postpone it to hpriv_release() when there is no user context
and no buffers are used.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We plan to do soft-reset either by mmio or by using cpucp packet
depending on the FW version. We don't want to check FW version in two
different places for that (execute soft-reset and wait to soft-reset)
so move the waiting to gaudi2_execute_soft_reset. This also makes sense
because the cpucp also does the waiting.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The user might want to stall/resume engines to perform power testing
for various scenarios. Because our current
HL_CS_FLAGS_ENGINE_CORE_COMMAND command only handles the engines' cores,
we need to add another opcode for handling entire engine and not just
its core.
The user supplies an array, where each entry holds the engine's ID and
the command to send to the engine. The size of the array is limited
by the number of engines in the ASIC (only Gaudi2 is currently
supported).
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|