summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-09drm/i915/display: move struct intel_link_m_n to intel_display_types.hJani Nikula
struct intel_crtc_state in intel_display_types.h actually needs the struct intel_link_m_n definition, while intel_display.h only needs the forward declaration. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1ec10e4415cf84c51b7eb51092e81876da0bc902.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915: Use intel_crtc_needs_modeset() moreVille Syrjälä
Prefer our own intel_crtc_needs_modeset() wrapper to drm_atomic_crtc_needs_modeset() whenever we are dealing with the intel_ types instead of drm_ types. Makes things a bit neater in general. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221031214037.1636-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-11-03drm/i915: Share {csc,gamma}_enable calculation for ilk/snb vs. ivb+Ville Syrjälä
ilk/snb vs. ivb+ hardware is mostly identical except for the addition of the split gamma mode on ivb. Thus we can share the csc_enable and gamma_enable calculation for both variants. Pull that stuff into a few helpers. Note that this also fills in the missing ctm/degamma stuff into ilk_color_check() pretty much, so for good measure let's also add a few extra checks relating to that, although we still don't expose ctm/degamma to userspace. But now it'll be trivial to do so if we wish. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-11-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2022-11-03drm/i915: Reject YCbCr output with degamma+gamma on pre-iclVille Syrjälä
Since the pipe CSC sits between the degamma and gamma LUTs there is no way to make us it for RGB->YCbCr conversion when both LUTs are also active. Simply reject such combos. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-10-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2022-11-03drm/i915: Reuse ilk_gamma_mode() on ivb+Ville Syrjälä
Apart from the split gamma mode ivb+ LUTs work just like ilk+ LUTs. So let's handle the special case, and then just fall back to ilk_gamma_mode() to avoid having to duplicate the same logic. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-9-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2022-11-03drm/i915: Pass limited_range explicitly to ilk_csc_convert_ctm()Ville Syrjälä
Since pre-icl vs. icl+ handle the limited range output stuff a bit differently it's probably less confusing if we just pass that information explicitly into ilk_csc_convert_ctm(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-8-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2022-11-03drm/i915: Deconfuse the ilk+ 12.4 LUT entry functionsVille Syrjälä
s/icl_lut_multi_seg_pack/ilk_lut_12p4_pack/ since that's what it is and group the corresponding "unpack" functions next to it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-7-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2022-11-03drm/i915: Split ivb_load_lut_ext_max() into two partsVille Syrjälä
Split the EXT2_MAX register programming into its own function. More in line with the whole "cobble together stuff from small pieces" approach used in this code. The EXT(2)_MAX registers are also not really part of the multi-segment section of the LUT, so hoist the calls to a higher level, just like we do in other gamma modes as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-6-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2022-11-03drm/i915: s/icl_load_gcmax/ivb_load_lut_max/Ville Syrjälä
Unify icl_load_gcmax() with the rest of the function naming scheme by calling it ivb_load_lut_max() instead. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-5-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2022-11-03drm/i915: s/dev_priv/i915/ in intel_color.cVille Syrjälä
Switch intel_color.c over to the modern 'i915' variable naming scehme. The only exceptions are the i9xx LUT access functions which still need the magic 'dev_priv' for the register macros. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-4-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2022-11-03drm/i915: Use _MMIO_PIPE() for SKL_BOTTOM_COLORVille Syrjälä
No need to use _MMIO_PIPE2() for SKL_BOTTOM_COLOR since all pipe registers are evenly spread on skl+. Switch to _MMIO_PIPE() and thus avoid the hidden dev_priv. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-3-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2022-11-03drm/i915: Use sizeof(variable) instead sizeof(type)Ville Syrjälä
Use sizeof(variable) instead of sizeof(type) in the hopes of less chance of screwing things up. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-2-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2022-11-03drm/i915/irq: make gen2_irq_init()/gen2_irq_reset() staticJani Nikula
The gen2 irq functions aren't used outside of i915_irq.h. Make them static, and remove the useless macro wrappers. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b28f45ef4ef69ab7a6f96ffa3fa3118994667332.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915/display: reduce includes in g4x_dp.h includesJani Nikula
Only include what's needed. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e68c71ad1c1c1de7f5bc659edeb208818cddde72.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915/display: reduce includes in intel_hdmi.hJani Nikula
Only include what's needed. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5949a57979dae615731b6ff54d5d150b91e34d27.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915/display: reduce the includes in intel_dvo_dev.hJani Nikula
Only include what's needed. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8523aa88daaf2dbf0ce138980142dbcd6d1ae0bc.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915: reduce includes in intel_display_power.hJani Nikula
Only include what's needed. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a7f41cf6d13ee78c0b3a7c5927680bb94edfc5fb.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915/dpio: move dpio_channel and dpio_phy enums to intel_dpio_phy.hJani Nikula
Reduce the size of intel_display.h by moving out the dpio_channel and dpio_phy enums. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7c3ee7a6482540a0267f7b2974d22cab8188707a.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915/dpio: un-inline the vlv phy/channel mapping functionsJani Nikula
Simplify the heavy intel_display_types.h header. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/943dd3e9812138b1cf3ddcfde896cfec006f3847.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915: un-inline icl_hdr_plane_mask() to simplify includesJani Nikula
This lets us drop the heavy intel_display.h include from intel_sprite.h. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/16e13b6f207f52f8810a06f71a08e637f6397dc8.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915: reduce includes in intel_fifo_underrun.hJani Nikula
Only include what's needed. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/29b57e168e8af842baad2626959cea258402a2c1.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915: reduce includes in intel_connector.hJani Nikula
Only include what's needed. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3aa1e27284e0ac308938978ae7da9ea9fbacad9e.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915/gmbus: move GPIO enum to gmbusJani Nikula
The GPIO enum is only used in intel_gmbus.c, hide it there. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3c386ce08d7d53a45c14c2e7519e4cc78a8161be.1667383630.git.jani.nikula@intel.com
2022-11-03drm/i915/psr: Remove inappropriate DSC slice alignment warningJouni Högander
Selective update area is now aligned with DSC slice height when DSC is enabled. Remove inappropriate warning about missing DSC alignment. Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Fixes: 47d4ae2192cb ("drm/i915/mtl: Extend PSR support") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7212 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221102174544.2288205-3-jouni.hogander@intel.com
2022-11-03drm/i915/psr: Ensure panel granularity aligns with DSC slice heightJouni Högander
Do not enable psr2 if panel ganularity is not aligned with DSC slice height when DSC is enabled Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221102174544.2288205-2-jouni.hogander@intel.com
2022-11-03drm/i915: update DSC feature flag handling during device initVinod Govindapillai
DSC feature information is no longer part of the DFSM register in some display generations. Bspec:50075 Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011093048.447177-1-vinod.govindapillai@intel.com
2022-11-01drm/i915/mtl: Fix PSR2_MAN_TRK_CTL bit getter functions for MTLJouni Högander
MTL shares PSR2_MAN_TRK_CTL bits with ADL. Currently some bit getter functions are incorrect for MTL. This patch fixes those. Bspec: 49274 Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Fixes: 47d4ae2192cb ("drm/i915/mtl: Extend PSR support") Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221101115342.1136720-1-jouni.hogander@intel.com
2022-11-01drm/i915/psr: Send update also on invalidateJouni Högander
Currently we are observing mouse cursor stuttering when using xrandr --scaling=1.2x1.2. X scaling/transformation seems to be doing fronbuffer rendering. When moving mouse cursor X seems to perform several invalidates and only one DirtyFB. I.e. it seems to be assuming updates are sent to panel while drawing is done. Earlier we were disabling PSR in frontbuffer invalidate call back (when drawing in X started). PSR was re-enabled in frontbuffer flush callback (dirtyfb ioctl). This was working fine with X scaling/transformation. Now we are just enabling continuous full frame (cff) in PSR invalidate callback. Enabling cff doesn't trigger any updates. It just configures PSR to send full frame when updates are sent. I.e. there are no updates on screen before PSR flush callback is made. X seems to be doing several updates in frontbuffer before doing dirtyfb ioctl. Fix this by sending single update on every invalidate callback. Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Fixes: 805f04d42a6b ("drm/i915/display/psr: Use continuos full frame to handle frontbuffer invalidations") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6679 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reported-by: Brian J. Tarricone <brian@tarricone.org> Tested-by: Brian J. Tarricone <brian@tarricone.org> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221024054649.31299-1-jouni.hogander@intel.com
2022-10-28drm/i915/sdvo: Fix debug printVille Syrjälä
Correctly indicate which outputs we support in the debug print. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Reduce copy-pasta in output setupVille Syrjälä
Avoid having to call the output init function for each output type separately. We can just call the right one based on the "class" of the output. Technically we could just walk the bits of the bitmask but that could change the order in which we initialize the outputs. To avoid any behavioural changes keep to the same explicit probe order as before. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Get rid of the output type<->device index stuffVille Syrjälä
Get rid of this silly output type<->device index back and forth and just pass the output type directly to the corresponding output init function. This was already being done for TV outputs anyway. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Don't add DDC modes for LVDSVille Syrjälä
Stop enumerating the DDC modes for SDVO LVDS outputs (outside the initial fixed mode setup). intel_panel_mode_valid() will just reject most of them anyway, and any left over are entirely pointless as they'll match the fixed mode hdisp+vdisp+vrefresh so no user visible effect from using them instead of the fixed mode. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Simplify output setup debugsVille Syrjälä
Get rid of this funny byte based dumping of invalid output flags and just dump it as a single hex numbers. Also do that early since all the rest is going to get skipped anyway of the thing is zero. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Grab mode_config.mutex during LVDS init to avoid WARNsVille Syrjälä
drm_mode_probed_add() is unhappy about being called w/o mode_config.mutex. Grab it during LVDS fixed mode setup to silence the WARNs. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301 Fixes: aa2b88074a56 ("drm/i915/sdvo: Fix multi function encoder stuff") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Setup DDC fully before output initVille Syrjälä
Call intel_sdvo_select_ddc_bus() before initializing any of the outputs. And before that is functional (assuming no VBT) we have to set up the controlled_outputs thing. Otherwise DDC won't be functional during the output init but LVDS really needs it for the fixed mode setup. Note that the whole multi output support still looks very bogus, and more work will be needed to make it correct. But for now this should at least fix the LVDS EDID fixed mode setup. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301 Fixes: aa2b88074a56 ("drm/i915/sdvo: Fix multi function encoder stuff") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-28drm/i915/sdvo: Filter out invalid outputs more sensiblyVille Syrjälä
We try to filter out the corresponding xxx1 output if the xxx0 output is not present. But the way that is being done is pretty awkward. Make it less so. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-27drm/i915/sdvo: Extract intel_sdvo_has_audio()Ville Syrjälä
Pull the SDVO audio state computation into a helper. This is almost identical to intel_hdmi_has_audio(), except the sink capabilities are stored under intel_sdvo rather than intel_hdmi. Might be nice to get rid of this duplication eventually... Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-16-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Do the vblank waitsVille Syrjälä
The spec tells us to do a bunch of vblank waits in the audio enable/disable sequences. Make it so. The FIXMEs are nonsense since we do the audio disable very early and enable very late, so vblank interrupts are in fact enabled when we do this. TODO not sure we actually want these since we don't even rely on the hw ELD buffer, and these might be there just to give the audio side a bit of time to respond to the unsol events. OTOH they might be really needed for some other reason. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-15-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Split "ELD valid" vs. audio PD on hsw+Ville Syrjälä
On the older platforms the audio presence detect bit is in the port register, so it gets written outside audio codec hooks and is this separate from the ELD valid toggling. Split the operations into two steps on hsw+ to be more consistent with both the other platforms and the spec. Also according to the spec we might need some vblank waits between the two which definitely needs them done separately. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-14-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Use intel_de_rmw() for most audio registersVille Syrjälä
The audio code does a lot of RMW accesses. Utilize intel_de_rmw() to make that a bit less tedious. There are still some hand rolled RMW left, but those have a lot of code in between the read and write to calculate the new value, so would need some refactoring first. v2: Add parens around the ?: to satisfy the robot Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-13-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Use u32* for ELDVille Syrjälä
Make the eld pointer u32* so we don't have to do super ugly casting in the code itself. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-12-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Make sure we write the whole ELD bufferVille Syrjälä
Currently we only write as many dwords into the hardware ELD buffers as drm_eld_size() tells us. That could mean the remainder of the hardware buffer is left with whatever stale garbage it had before, which doesn't seem entirely great. Let's zero out the remainder of the buffer in case the provided ELD doesn't fill it fully. We can also sanity check out idea of the hardware ELD buffer's size by making sure the address wrapped back to zero once we wrote the entire buffer. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-11-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Read ELD buffer size from hardwareVille Syrjälä
We currently read the ELD buffer size from hardware on g4x, but on ilk+ we just hardcode it to 84 bytes. Let's unify this and just do the hardware readout on all platforms, in case the size changes in the future or something. TODO: should perhaps do the readout during driver init and stash the results somewhere so that we could check that the connector's ELD actually fits and not even try to enable audio in that case... v2: Document the size is in dwords (Jani) Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-10-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Nuke intel_eld_uptodate()Ville Syrjälä
No idea why we do this ELD comparions on g4x before loading the new ELD. Seems entirely pointless so just get rid of it. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-9-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Protect singleton register with a lockVille Syrjälä
On the "ilk" platforms AUD_CNTL_ST2 is a singleton. Protect it with the audio mutex in case we ever want to do parallel RMW access to it. Currently that should not happen since we only do audio enable/disable from full modesets, and those are fully serialized. But we probably want to think about toggling audio on/off from fastsets too. The hsw codepaths already have the same locking. g4x should not need it since it can only do audio to a single port at a time, which means it's actually broken in more ways than this atm. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-8-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Unify register bit namingVille Syrjälä
Rename a few g4x bits to match the ibx+ bits. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-7-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Use REG_BIT() & co.Ville Syrjälä
Switch the audio registers to REG_BIT() & co. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-6-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Extract struct ilk_audio_regsVille Syrjälä
The "ilk" audio codec codepaths have some duplicated code to figure out the correct registers to use on each platform. Extrat that into a single place. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-5-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Remove CL/BLC audio stuffVille Syrjälä
We don't use the audio code on crestline (CL) since it doesn't support native HDMI output, and SDVO has it's own way of doing audio. And Bearlake-C (BLC) doesn't even exist in the real world, so no point it trying to deal with it. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-4-ville.syrjala@linux.intel.com
2022-10-27drm/i915/audio: Nuke leftover ROUNDING_FACTORVille Syrjälä
Remove some leftovers I missed in commit 2dd43144e824 ("drm/i915: Streamline the artihmetic") Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221026170150.2654-3-ville.syrjala@linux.intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 14:43:18 +0000