| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes that came in since my pull request, nothing
major here"
* tag 'regulator-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Fix missing error return from regulator_bulk_get()
regulator: pca9450: Remove restrictions for regulator-name
|
|
The exception for the "unaligned access at the end of the page, next
page not mapped" never happens, but the fixup code ends up causing
trouble for compilers to optimize well.
clang in particular ends up seeing it being in the middle of a loop, and
tries desperately to optimize the exception fixup code that is never
really reached.
The simple solution is to just move all the fixups into the exception
handler itself, which moves it all out of the hot case code, and means
that the compiler never sees it or needs to worry about it.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These operations are documented as always ordered in
include/asm-generic/bitops/instrumented-atomic.h, and producer-consumer
type use cases where one side needs to ensure a flag is left pending
after some shared data was updated rely on this ordering, even in the
failure case.
This is the case with the workqueue code, which currently suffers from a
reproducible ordering violation on Apple M1 platforms (which are
notoriously out-of-order) that ends up causing the TTY layer to fail to
deliver data to userspace properly under the right conditions. This
change fixes that bug.
Change the documentation to restrict the "no order on failure" story to
the _lock() variant (for which it makes sense), and remove the
early-exit from the generic implementation, which is what causes the
missing barrier semantics in that case. Without this, the remaining
atomic op is fully ordered (including on ARM64 LSE, as of recent
versions of the architecture spec).
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: e986a0d6cb36 ("locking/atomics, asm-generic/bitops/atomic.h: Rewrite using atomic_*() APIs")
Fixes: 61e02392d3c7 ("locking/atomic/bitops: Document and clarify ordering semantics for failed test_and_{}_bit()")
Signed-off-by: Hector Martin <marcan@marcan.st>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When a tx_timeout fires, the PF attempts to recover by incrementally
resetting. First we try a PFR, then CORER and finally a GLOBR. If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.
If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix checksum offload on VXLAN tunnels.
In case, when mpls protocol is not used, set l4 header to transport
header of skb. This fixes case, when user tries to offload checksums
of VXLAN tunneled traffic.
Steps for reproduction (requires link partner with tunnels):
ip l s enp130s0f0 up
ip a f enp130s0f0
ip a a 10.10.110.2/24 dev enp130s0f0
ip l s enp130s0f0 mtu 1600
ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \
enp130s0f0 dstport 4789
ip l s vxlan12_sut up
ip a a 20.10.110.2/24 dev vxlan12_sut
iperf3 -c 20.10.110.1 #should connect
Without this patch, TX descriptor was using wrong data, due to
l4 header pointing wrong address. NIC would then drop those packets
internally, due to incorrect TX descriptor data, which increased
GLV_TEPC register.
Fixes: b4fb2d33514a ("i40e: Add support for MPLS + TSO")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ib_umem_dmabuf_map_pages() returns 0 on success and -ERRNO on failure.
dma_resv_wait_timeout() uses a different scheme:
* Returns -ERESTARTSYS if interrupted, 0 if the wait timed out, or
* greater than zero on success.
This results in ib_umem_dmabuf_map_pages() being non-functional as a
positive return will be understood to be an error by drivers.
Fixes: f30bceab16d1 ("RDMA: use dma_resv_wait() instead of extracting the fence")
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/0-v1-d8f4e1fa84c8+17-rdma_dmabuf_fix_jgg@nvidia.com
Tested-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
QP0 in HW is used for CMDQ, and the rest is for RDMA QPs. So the actual
max_qp capacity reported to core should be max_qp (reported by HW) - 1.
So does max_cq.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Link: https://lore.kernel.org/all/20220810014320.88026-1-chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
RDMA driver should get the MR key from FMR WR, not the MR structure passed
in.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Link: https://lore.kernel.org/r/20220810014320.88026-2-chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Lenovo Yoga7 14IAL7 requires the same quirk as Lenovo Yoga9 14IAP7 for
fixing the bass speaker problems.
Reported-by: Pascal Gross <baipush@tutanota.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/N9_CjBz--3-2@tutanota.com
Link: https://lore.kernel.org/r/20220816132132.15520-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 'c2ed5611afd7' has increased the cpl_t5_pass_accept_rpl{} structure
size by 8B to avoid roundup. cpl_t5_pass_accept_rpl{} is a HW specific
structure and increasing its size will lead to unwanted adapter errors.
Current commit reverts the cpl_t5_pass_accept_rpl{} back to its original
and allocates zeroed skb buffer there by avoiding the memset for iss field.
Reorder code to minimize chip type checks.
Fixes: c2ed5611afd7 ("iw_cxgb4: Use memset_startat() for cpl_t5_pass_accept_rpl")
Link: https://lore.kernel.org/r/20220809184118.2029-1-rahul.lakkireddy@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The cited commit allowed the driver to operate over HCAs that have
4 physical ports. Use the number of ports of the RDMA device in the for
loop instead of using the struct size.
Fixes: 4cd14d44b11d ("net/mlx5: Support devices with more than 2 ports")
Link: https://lore.kernel.org/r/a54a56c2ede16044a29d119209b35189c662ac72.1659944855.git.leonro@nvidia.com
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
For devices which use HID CSC3551, correct ACPI _DSD properties are
required to be able support those systems.
Add error message to clarify this.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220815162906.463108-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.0
A relatively large batch of fixes that came in since my pull request,
none of them too major and mostly device specific apart from a series of
security/robustness improvements from Takashi.
|
|
The iSER Initiator uses two types of receive buffers:
- one big login buffer posted by iser_post_recvl();
- several small message buffers posted by iser_post_recvm().
The login buffer is used at the login phase and full feature phase in
the discovery session. It may take a few requests and responses to
complete the login phase. The message buffers are only used in the
normal operational session at the full feature phase.
After the commit referred in the fixes line, the login operation fails
if the authentication is enabled. That happens because the Initiator
posts a small receive buffer after the first response from Target. So,
the next send operation fails because Target's second response does not
fit into the small receive buffer.
This commit adds additional checks to prevent posting small receive
buffers until the full feature phase.
Fixes: 39b169ea0d36 ("IB/iser: Fix RNR errors")
Link: https://lore.kernel.org/r/20220805060135.18493-1-sergeygo@nvidia.com
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
task_work
In ublk_queue_rq(), Assume current request is a re-issued request aborted
previously in monitor_work because the ubq_daemon(ioucmd's task) is
PF_EXITING. For this request, we cannot call
io_uring_cmd_complete_in_task() anymore because at that moment io_uring
context may be freed in case that no inflight ioucmd exists. Otherwise,
we may cause null-deref in ctx->fallback_work.
Add a check on UBLK_IO_FLAG_ABORTED to prevent the above situation. This
check is safe and makes sense.
Note: monitor_work sets UBLK_IO_FLAG_ABORTED and ends this request
(releasing the tag). Then the request is restarted(allocating the tag)
and we are here. Since releasing/allocating a tag implies smp_mb(),
finding UBLK_IO_FLAG_ABORTED guarantees that here is a re-issued request
aborted previously.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220815023633.259825-4-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since __ublk_rq_task_work always fails requests immediately during
exiting, __ublk_fail_req() is only called from abort context during
exiting. So lock is unnecessary.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220815023633.259825-3-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace direct check on PF_EXITING in __ublk_rq_task_work() by the
existing wrapper. Also inline ubq_daemon_is_dying().
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220815023633.259825-2-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix variable names in some kerneldocs, naming in others.
Add kerneldocs for struct vring_desc and vring_interrupt.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Message-Id: <20220810094004.1250-2-ricardo.canuelo@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
|
|
This reverts commit a10fba0377145fccefea4dc4dd5915b7ed87e546: the
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just
rename size to size_hint and make sure legacy
transports ignore the hint.
But it's not sure what the benefit is in any case, so
let's drop it.
Fixes: a10fba037714 ("virtio: find_vqs() add arg sizes")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-8-mst@redhat.com>
|
|
This reverts commit 99e8927d8a4da8eb8a8a5904dc13a3156be8e7c0:
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just rename size to
size_hint and make sure legacy transports ignore the hint.
But it's not sure what the benefit is in any case, so let's drop it.
Fixes: 99e8927d8a4d ("virtio_vdpa: support the arg sizes of find_vqs()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-6-mst@redhat.com>
|
|
This reverts commit cdb44806fca2d0ad29ca644cbf1505433902ee0c: the legacy
path is wrong and in fact can not support the proposed API since for a
legacy device we never communicate the vq size to the hypervisor.
Reported-by: Andres Freund <andres@anarazel.de>
Fixes: cdb44806fca2 ("virtio_pci: support the arg sizes of find_vqs()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-5-mst@redhat.com>
|
|
This reverts commit fbed86abba6e0472d98079790e58060e4332608a.
The API is now unused, let's not carry dead code around.
Fixes: fbed86abba6e ("virtio_mmio: support the arg sizes of find_vqs()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-4-mst@redhat.com>
|
|
This reverts commit fe3dc04e31aa51f91dc7f741a5f76cc4817eb5b4: the
API is now unused and in fact can't be implemented on top of a legacy
device.
Fixes: fe3dc04e31aa ("virtio: add helper virtio_find_vqs_ctx_size()")
Cc: "Xuan Zhuo" <xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-3-mst@redhat.com>
|
|
This reverts commit 762faee5a2678559d3dc09d95f8f2c54cd0466a7.
This has been reported to trip up guests on GCP (Google Cloud).
The reason is that virtio_find_vqs_ctx_size is broken on legacy
devices. We can in theory fix virtio_find_vqs_ctx_size but
in fact the patch itself has several other issues:
- It treats unknown speed as < 10G
- It leaves userspace no way to find out the ring size set by hypervisor
- It tests speed when link is down
- It ignores the virtio spec advice:
Both \field{speed} and \field{duplex} can change, thus the driver
is expected to re-read these values after receiving a
configuration change notification.
- It is not clear the performance impact has been tested properly
Revert the patch for now.
Reported-by: Andres Freund <andres@anarazel.de>
Link: https://lore.kernel.org/r/20220814212610.GA3690074%40roeck-us.net
Link: https://lore.kernel.org/r/20220815070203.plwjx7b3cyugpdt7%40awork3.anarazel.de
Link: https://lore.kernel.org/r/3df6bb82-1951-455d-a768-e9e1513eb667%40www.fastmail.com
Link: https://lore.kernel.org/r/FCDC5DDE-3CDD-4B8A-916F-CA7D87B547CE%40anarazel.de
Fixes: 762faee5a267 ("virtio_net: set the default max ring size by find_vqs()")
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Andres Freund <andres@anarazel.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <20220816053602.173815-2-mst@redhat.com>
|
|
1024 notification slots is rather an arbitrary value, raise it up,
everything is accounted to memcg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/eb78a0a5f2fa5941f8e845cdae5fb399bf7ba0be.1660566179.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We may account memory to a memcg of a request that didn't even got to
the network layer. It's not a bug as it'll be routinely cleaned up on
flush, but it might be confusing for the userspace.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b8aae61f4c3ddc4da97c1da876bb73871f352d50.1660566179.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have a helper that checks for whether a request contains anything in
->async_data or not, namely req_has_async_data(). It's better to use it
as it might have some extra considerations.
Fixes: 43e0bbbd0b0e3 ("io_uring: add netmsg cache")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b7414da4e7c3c32c31fc02dfd1355af4ccf4ca5f.1660566179.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-12 (iavf)
This series contains updates to iavf driver only.
Przemyslaw frees memory for admin queues in initialization error paths,
prevents freeing of vf_res which is causing null pointer dereference,
and adjusts calls in error path of reset to avoid iavf_close() which
could cause deadlock.
Ivan Vecera avoids deadlock that can occur when driver if part of
failover.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix deadlock in initialization
iavf: Fix reset error handling
iavf: Fix NULL pointer dereference in iavf_get_link_ksettings
iavf: Fix adminq error handling
====================
Link: https://lore.kernel.org/r/20220812172309.853230-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When bulk delete command is received in the rtnetlink_rcv_msg function,
if bulk delete is not supported, module_put is not called to release
the reference counting. As a result, module reference count is leaked.
Fixes: a6cec0bcd342 ("net: rtnetlink: add bulk delete support flag")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220815024629.240367-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dma_map_single() calls fail in moxart_mac_setup_desc_ring() and
moxart_mac_start_xmit() which leads to an incessant output of this:
[ 16.043925] moxart-ethernet 92000000.mac eth0: DMA mapping error
[ 16.050957] moxart-ethernet 92000000.mac eth0: DMA mapping error
[ 16.058229] moxart-ethernet 92000000.mac eth0: DMA mapping error
Passing pdev to DMA is a common approach among net drivers.
Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220812171339.2271788-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When smb client open file in ksmbd share with O_TRUNC, dos attribute
xattr is removed as well as data in file. This cause the FSCTL_SET_SPARSE
request from the client fails because ksmbd can't update the dos attribute
after setting ATTR_SPARSE_FILE. And this patch fix xfstests generic/469
test also.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove unnecessary generic_fillattr to fix wrong
AllocationSize of SMB2_CREATE response, And
Move the call of ksmbd_vfs_getattr above the place
where stat is needed because of truncate.
This patch fixes wrong AllocationSize of SMB2_CREATE
response. Because ext4 updates inode->i_blocks only
when disk space is allocated, generic_fillattr does
not set stat.blocks properly for delayed allocation.
But ext4 returns the blocks that include the delayed
allocation blocks when getattr is called.
The issue can be reproduced with commands below:
touch ${FILENAME}
xfs_io -c "pwrite -S 0xAB 0 40k" ${FILENAME}
xfs_io -c "stat" ${FILENAME}
40KB are written, but the count of blocks is 8.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add the missing command name for ATA_CMD_NCQ_NON_DATA to
ata_get_cmd_name().
Fixes: 661ce1f0c4a6 ("libata/libsas: Define ATA_CMD_NCQ_NON_DATA")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Since lib/cpumask.o is only built for CONFIG_SMP=y, NR_CPUS will always
be greater than 1 at compile time. This makes checking for that
condition unnecesarry, so it can be dropped.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
In the uniprocessor case, cpumask_next_wrap() can be simplified, as the
number of valid argument combinations is limited:
- 'start' can only be 0
- 'n' can only be -1 or 0
The only valid CPU that can then be returned, if any, will be the first
one set in the provided 'mask'.
For NR_CPUS == 1, include/linux/cpumask.h now provides an inline
definition of cpumask_next_wrap(), which will conflict with the one
provided by lib/cpumask.c. Make building of lib/cpumask.o again depend
on CONFIG_SMP=y (i.e. NR_CPUS > 1) to avoid the re-definition.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Between the generic version, and their uniprocessor optimised
implementations, the return types of cpumask_any_and_distribute() and
cpumask_any_distribute() are not identical. Change the UP versions to
'unsigned int', to match the generic versions.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The commit 08f3dff799d4 (mmc: sdhci-of-dwcmshc: add rockchip platform
support") introduces the use of_device_get_match_data() to check for some
chips. Unfortunately, it also breaks the BlueField-3 FW, which uses ACPI.
To fix the problem, let's add the ACPI match data and the corresponding
quirks to re-enable the support for the BlueField-3 SoC.
Reviewed-by: David Woods <davwoods@nvidia.com>
Signed-off-by: Liming Sun <limings@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220809173742.178440-1-limings@nvidia.com
[Ulf: Clarified the commit message a bit]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Revert part of the earlier changes to fix the kselftest build when
using a sub-directory from the top of the tree as this broke the
landlock test build as a side-effect when building with "make -C
tools/testing/selftests/landlock".
Reported-by: Mickaël Salaün <mic@digikod.net>
Fixes: a917dd94b832 ("selftests/landlock: drop deprecated headers dependency")
Fixes: f2745dc0ba3d ("selftests: stop using KSFT_KHDR_INSTALL")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since f3a2181e16f1 ("netfilter: nf_tables: Support for sets with
multiple ranged fields"), it possible to combine intervals and
concatenations. Later on, ef516e8625dd ("netfilter: nf_tables:
reintroduce the NFT_SET_CONCAT flag") provides the NFT_SET_CONCAT flag
for userspace to report that the set stores a concatenation.
Make sure NFT_SET_CONCAT is set on if field_count is specified for
consistency. Otherwise, if NFT_SET_CONCAT is specified with no
field_count, bail out with EINVAL.
Fixes: ef516e8625dd ("netfilter: nf_tables: reintroduce the NFT_SET_CONCAT flag")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If we use the ancient SysV syscall ABI, we'd better have tell the
kernel how to claim that a negative return value is a success.
Use ->orig_r2 for that - it's inaccessible via ptrace, so it's
a fair game for changes and it's normally[*] non-negative on return
from syscall. Set to -1; syscall is not going to be restart-worthy
by definition, so we won't interfere with that use either.
[*] the only exception is rt_sigreturn(), where we skip the entire
messing with r1/r2 anyway.
Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Fixes: b53e906d255d ("nios2: Signal handling support")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
sys_foo() returns -512 (aka -ERESTARTSYS) => do_signal() sees
512 in r2 and 1 in r1.
sys_foo() returns 512 => do_signal() sees 512 in r2 and 0 in r1.
The former is restart-worthy; the latter obviously isn't.
Fixes: b53e906d255d ("nios2: Signal handling support")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
all checks done before letting the tracer modify the register
state are worthless...
Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
fill the gaps in there with sys_ni_syscall, as everyone does...
Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
make sure that ->orig_r2 is negative for everything except
the syscalls.
Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
NFT_SET_ELEM_INTERVAL_END
These flags are mutually exclusive, report EINVAL in this case.
Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If the NFT_SET_CONCAT|NFT_SET_INTERVAL flags are set on, then the
netlink attribute NFTA_SET_ELEM_KEY_END must be specified. Otherwise,
NFTA_SET_ELEM_KEY_END should not be present.
For catch-all element, NFTA_SET_ELEM_KEY_END should not be present.
The NFT_SET_ELEM_INTERVAL_END is never used with this set flags
combination.
Fixes: 7b225d0b5c6d ("netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attribute")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
On older z series machines (z12 and older) there is no QCI info
available. The AP code took care of this and the AP bus scan then
switched to simple probing via TAPQ.
With commit
283915850a44 ("s390/ap: notify drivers on config changed and scan complete callbacks")
some code was introduced which silently assumed that the QCI info is
always available. However, with KVM simulating an older machine (z12)
the result was a kernel crash. Funnily the same crash does not happen
on LPAR - maybe because NULL is a valid pointer and reading some data
from address 0 also works fine.
This fix now improves the code to be aware that the QCI instruction
may not be available on older machines and thus the two pointers to
QCI info structs may simple be NULL.
However, on a machine not providing the QCI info the two callbacks to
the zcrypt device drivers on_config_changed() and on_scan_complete()
provide parameters which are pointers to a QCI info struct.
These both callbacks are NOT served if there is no QCI info available.
The only consumer of these callbacks is the vfio device driver. This
driver only supports CEX4 and higher. All physical machines which are
able to provide CEX4 cards have QCI support available. So there is
no sense in for example fill the QCI info struct by hand with looping
over cards and queues and TAPQ each APQN.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 283915850a44 ("s390/ap: notify drivers on config changed and scan complete callbacks")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
When booting under KVM the following error messages are issued:
hypfs.7f5705: The hardware system does not support hypfs
hypfs.7a79f0: Initialization of hypfs failed with rc=-61
Demote the severity of first message from "error" to "info" and issue
the second message only in other error cases.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220620094534.18967-1-jgross@suse.com
[arch/s390/hypfs/hypfs_diag.c changed description]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
These Asus Zenbook laptop use Realtek HDA codec combined with
2xCS35L41 Amplifiers using SPI.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220815141953.25197-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
