summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-09media: atomisp: Remove in_reset argument from atomisp_css_start()Hans de Goede
The in_reset argument to atomisp_css_start() is only ever true in atomisp_assert_recovery_work(), drop the argument and move the special reset handlig to atomisp_assert_recovery_work(). Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove unused atomisp_get_css_pipe_id() functionHans de Goede
Remove no longer user atomisp_get_css_pipe_id() function. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove unused css_pipe_id argument from ↵Hans de Goede
atomisp_css_[start|stop]() The css_pipe_id argument pass to atomisp_css_[start|stop]() is not used, drop it. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove atomisp_[sub]dev_users()Hans de Goede
The atomisp_[sub]dev_users() functions are not used anymore, remove them. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Allow system suspend to continue with open /dev/video# nodesHans de Goede
Just having a /dev/video# node open is not a reason to block system suspend. At least when userspace is not streaming. In that case the worst case scenario is that streams have been created, but we can just destroy those before powering off the ISP and recreate the streams on resume. Fixing suspend when streaming is left as a FIXME item for later. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Rename atomisp_destroy_pipes_stream_force() to ↵Hans de Goede
atomisp_destroy_pipes_stream() There now no longer is a non force version of atomisp_destroy_pipes_stream_force() so having the _force postfix no longer makes sense rename it to atomisp_destroy_pipes_stream(). Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Simplify atomisp_isr() and recovery_work()Hans de Goede
Both atomisp_isr() and recovery_work() now have a combination of: 1. "if (!isp->asd.streaming) goto out;" code at the top 2. "if (sp->asd.streaming) {}" blocks in the body which are jumped over by the goto out. This means that the "if (sp->asd.streaming) {}" blocks are always executed if they are not jumped over by the goto. Remove the unnecessary "if (sp->asd.streaming)" checks and re-indent the code. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove atomisp_streaming_count()Hans de Goede
atomisp_streaming_count() is just an alias for isp->asd.streaming now, replace it with directly checking that and remove the helper. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove no longer used atomisp_css_flush()Hans de Goede
Remove the no longer used atomisp_css_flush() function and merge atomisp_assert_recovery_work() and __atomisp_css_recover() into a single function. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Turn asd->streaming state tracker into a boolHans de Goede
The ATOMISP_DEVICE_STREAMING_STOPPING pipe state comes from when we still had continuous mode. This would be set when streaming from both capture + preview devnodes when 1 of the 2 streams has been stopped and the driver was waiting for the other stream to get stopped too. With continuous mode gone the stopping state is no longer necessary and asd->streaming can be changed to a bool. Note that atomisp_assert_recovery_work() would still temporarily set streaming to stopping, but it does so with the isp->mutex held and changes streaming to either enabled or disabled before releasing the mutex, so none of the consumers which care about the difference ever see the stopping state. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Simplify atomisp_pipe_check()Hans de Goede
All switch (pipe->asd->streaming) cases in atomisp_pipe_check() are either no-ops or never happen: 1. ATOMISP_DEVICE_STREAMING_DISABLED already is a no-op 2. The videobuf2 core guarantees that when we are streaming vb2_is_busy() returns true. So the ATOMISP_DEVICE_STREAMING_ENABLED case is already handled by the if above the switch (pipe->asd->streaming). 3. After recent changes pipe->asd->streaming is only ever set to ATOMISP_DEVICE_STREAMING_STOPPING in atomisp_assert_recovery_work() and that function holds isp->mutex and always transitions the streaming state to ATOMISP_DEVICE_STREAMING_DISABLED or ATOMISP_DEVICE_STREAMING_ENABLED before releasing the mutex. So atomisp_pipe_check() never sees ATOMISP_DEVICE_STREAMING_STOPPING. Remove the entire switch-case. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Simplify atomisp_open() and atomisp_release()Hans de Goede
Now that continuous mode is gone and we only have 1 /dev/video# node, combined with only allowing 1 open of that /dev/video# node for now, there is no need to check for other (sub)dev / pipe users. Remove the unnecessary checks for a nice cleanup. Note we also don't need to set asd->streaming to disabled since the vb2_fop_release() call done by atomisp_release() will have called atomisp_stop_streaming() already at this point (if necessary) and that will have already done this. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Simplify atomisp_css_[start|stop]()Hans de Goede
Now that continuous mode is gone and we only have 1 /dev/video# node, the videobuf2 core guarantees that atomisp_css_[start|stop]() will only be called one at a time. So there is no need for atomisp_streaming_count() counts. When reqbufs has been done then the streams are guaranteed to be created, and streaming cannot be started without reqbufs so there is no need for atomisp_css_start() to check if it needs to create the streams. Use this to clean-up atomisp_css_[start|stop](). While at it also fix atomisp_css_start() not re-creating the streams on an error, breaking the guarantee that the streams are always there after a succesfull reqbufs call. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Simplify atomisp_[start|stop]_streaming()Hans de Goede
Now that continuous mode is gone and we only have 1 /dev/video# node, the videobuf2 core guarantees that atomisp_[start|stop]_streaming() will only be called one at a time. So there is no need to check for things like the isp is already streaming when starting, or other streams still being active while stopping. Remove checks for these from atomisp_[start|stop]_streaming(). While at it also improve the logging a bit: 1. Remove the dev_err(isp->dev, "atomisp_reset") logged on every stream stop (even though everything is fine. 2. Log a message when starting/stopping the sensor stream fails Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove atomisp_sensor_start_stream()Hans de Goede
Now that we no longer have continuous mode we always want to start the sensor on the first atomisp_start_streaming() call and stop it on the first atomisp_stop_streaming() call. Remove atomisp_sensor_start_stream() which returned the number of streams which should be active before starting the sensor and always start/stop the sensor directly. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove isp_timeout flagHans de Goede
isp_timeout only ever gets set in __atomisp_css_recover() and then immediately gets cleared again after calling atomisp_reset(). All this happens with isp->mutex held. The only consumer of isp->isp_timeout is atomisp_stop_streaming(), which also holds isp->mutex and which is *not* called by atomisp_reset(). Since both hold isp->mutex and since __atomisp_css_recover() clears isp_timeout before releasing the mutex, atomisp_stop_streaming() can never see isp_timeout being true, so just remove the flag. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove unused mipi_frame_size field from atomisp_[sub_]deviceHans de Goede
Both the atomisp_device and the atomisp_sub_device structs have an unused mipi_frame_size field, remove the field from both. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove a bunch of unused atomisp_css_*() functionsHans de Goede
Remove various unused atomisp_css_*() functions from atomisp_compat_css20.c. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove atomisp_subdev_register_video_nodes() helperHans de Goede
Now that there is only 1 /dev/video# node left there is no need to do this in a helper. Just make atomisp_register_device_nodes() call video_register_device() directly. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove 1 line atomisp_flush_bufs_and_wakeup() helperHans de Goede
After recent changes this now is just a wrapper around atomisp_flush_video_pipe(). Make its single caller call atomisp_flush_video_pipe() directly and drop the helper. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove source_pad parameter from functions and structsHans de Goede
Now that there is only 1 source-pad for an asd there is no need to have a parameter for this in various places. Remove the source_pad function parameter and atomisp_sub_device.capture_pad data member. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Rename video_out_preview to video_outHans de Goede
Now that we have only 1 /dev/video# node for output for all different run-modes (with only 1 run-mode at a time) using video_out_preview for the remaining atomisp_pipe does not properly reflect that this is *the* output pipe. Fo the following renames to fix the naming: s/video_out_preview/video_out/ s/ATOMISP_SUBDEV_PAD_SOURCE_PREVIEW/ATOMISP_SUBDEV_PAD_SOURCE/ Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Drop atomisp_is_vf_pipe()Hans de Goede
Since there only is one /dev/video# node now (no more continuous mode), there are now no longer separate main capture + view-finder pipes. We are now always on the main pipe, so atomisp_is_vf_pipe() should always return false now. Drop any checks using it, replacing them with the code-path for a false return. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Register only 1 /dev/video# nodeHans de Goede
Now that we no longer support continuous mode and thus no longer support streaming from 2 /dev/video# nodes at the same time, there is no need to have a separate /dev/video# node (+ matching v4l2-subdev pads) for each run-mode. Keep the video_out_preview /dev/video0 device and remove the video_out_video_capture / video_out_vf / video_out_capture video-devices (atomisp_pipe-s) and also remove the matching ATOMISP_SUBDEV_PAD_SOURCE_VIDEO / ATOMISP_SUBDEV_PAD_SOURCE_VF / ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE source-pads. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Replace source-pad checks with run-mode checksHans de Goede
Currently atomisp behavior is determined by a mix of which /dev/video# node (which isp-subdev source-pad) is opened + which run-mode is set. With various combinations not being allowed and likely leading to crashes due to lack of error checking. Now that we no longer support continuous mode and thus no longer support streaming from 2 /dev/video# nodes at the same time, there is no need to have a separate /dev/video# node for each run-mode. Instead the plan is to support the 3 different run-modes on a single /dev/video# node. Since we are moving to a single isp-subdev source-pad, the behavior should then be solely and consistently be defined by the run-mode. Replace various source-pad checks with run-mode checks in preparation for moving to a single source-pad. In some places the new run-mode checks overlap with existing run-mode checks and the checks are folded together into a single check. This removes handling of the ATOMISP_SUBDEV_PAD_SOURCE_VF source-pad, this source-pad was only useful for continuous mode, for which support has been removed. Note that currently the only run-mode which we actually have been able to get to work is the video-capture with scaler aka preview mode and as such that is also the only run-mode tested. This patch is intended to preserve the current (known to not work 100%) behavior of the other run-modes, so that those maybe can be enabled later. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Drop atomisp_get_css_buf_type()Hans de Goede
Since continuous mode has been removed, there no longer is the option for separate capture output + viewfinder output streams at the same time. So all buffers queued by userspace are now for the normal output stream, remove atomisp_get_css_buf_type() and always use IA_CSS_BUFFER_TYPE_OUTPUT_FRAME for buffers queued by userspace. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove isp->need_gfx_throttle fieldHans de Goede
Remove the isp->need_gfx_throttle field it is only ever set and never read. Also the code setting it is broken, comparing run_mode->val to ATOMISP_SUBDEV_PAD_SOURCE_VIDEO which are not of the same type / not part of the same enum. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove Continuous capture and SDV run-modesHans de Goede
Since we no longer support Continuous mode, setting the run_mode to ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE no longer make sense, so remove this. While at it, also remove ATOMISP_RUN_MODE_SDV, which was never exposed to userspace in the first place. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: Remove res_overflow parameter from atomisp_try_fmt()Hans de Goede
The only remaining caller of atomisp_try_fmt() always passes NULL for the res_overflow parameter. Drop it and simplify atomisp_try_fmt(). Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: sh_css_mipi: Remove #ifdef ISP2401Kate Hsuan
The actions of ISP2401 and 2400 are determined at the runtime. Link: https://lore.kernel.org/r/20230508062632.34537-5-hpa@redhat.com Signed-off-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: sh_css_firmware: determine firmware version at runtimeKate Hsuan
The firmware version of ISP2401 and 2400 is determined at runtime. Link: https://lore.kernel.org/r/20230508062632.34537-4-hpa@redhat.com Signed-off-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: sh_css_sp: Remove #ifdef ISP2401Kate Hsuan
The actions of ISP2401 and 2400 will be determined at the runtime. Link: https://lore.kernel.org/r/20230508062632.34537-3-hpa@redhat.com Signed-off-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: runtime: frame: remove #ifdef ISP2401Kate Hsuan
The actions of ISP2401 and 2400 are determined at the runtime. Link: https://lore.kernel.org/r/20230508062632.34537-2-hpa@redhat.com Signed-off-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: atomisp: sh_css: Remove #ifdef ISP2401Kate Hsuan
The actions of ISP2401 and 2400 are determined at the runtime. Link: https://lore.kernel.org/r/20230508062632.34537-1-hpa@redhat.com Signed-off-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: uvcvideo: Constify descriptor buffersLaurent Pinchart
There is no need to modify the content of UVC descriptor buffers during parsing. Make all the corresponding pointers const to avoid unintended modifications. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: uvcvideo: Constify formats, frames and intervalsLaurent Pinchart
The formats, frames and intervals stored in the uvc_streaming structure are not meant to change after being parsed at probe time. Make them const to prevent unintended modifications, and adapt the probe code accordingly to use non-const pointers during parsing. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: uvcvideo: Increment intervals pointer at end of parsingLaurent Pinchart
The intervals pointer is incremented for each interval when parsing the format descriptor. This doesn't cause any issue as such, but gets in the way of constifying some pointers. Modify the parsing code to index the intervals pointer as an array and increment it in one go at end of parsing. Careful readers will notice that the maxIntervalIndex variable is set to 1 instead of n - 2 when bFrameIntervalType has a zero value. This is functionally equivalent, as n is equal to 3 in that case. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: uvcvideo: Reorganize format descriptor parsingLaurent Pinchart
Format descriptor parsing has grown over time and now mixes parsing of frame intervals with various quirk handling. Reorganize it to make the code easier to follow, by parsing frame intervals first, and then applying fixes and quirks. No functional change is intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: uvcvideo: Use clamp() to replace manual implementationLaurent Pinchart
The kernel has a nice clamp() macro, use it to replace a manual implementation based on min() and max(). No functional change is intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: uvcvideo: Rename uvc_format 'frame' field to 'frames'Laurent Pinchart
The uvc_format 'frame' field points to an array of frames. Rename it to 'frames' to make this clearer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: uvcvideo: Rename uvc_streaming 'format' field to 'formats'Laurent Pinchart
The uvc_streaming 'format' field points to an array of formats. Rename it to 'formats' to make this clearer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: uvcvideo: Enable Intel RealSense metadata for devicesDmitry Perchanov
Intel RealSense UVC Depth cameras produce metadata in a vendor-specific format that is already supported by the uvcvideo driver. Enable handling of this metadata for 7 additional RealSense devices. Co-developed-by: Yu MENG <yu1.meng@intel.com> Co-developed-by: Evgeni Raikhel <evgeni.raikhel@intel.com> Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: uapi: v4l: Intel metadata format updateDmitry Perchanov
Update metadata structure for Intel RealSense UVC/MIPI cameras. Compliant to Intel Configuration version 3. Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09Revert "media: uvcvideo: Limit power line control for Acer EasyCamera"Sakari Ailus
This reverts commit 5dd0eab84ae9a4b292baf1ad02e1a273c475cd04. Revert this patch as it has been merged twice. The earlier merged commit is 81e78a6fc320 ("media: uvcvideo: Limit power line control for Acer EasyCamera"). Reported-by: Dmitry Perchanov <dmitry.perchanov@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: provide ctx queue lock for ioctl synchronizationSergey Senozhatsky
Video device has to provide a lock so that __video_do_ioctl() can serialize IOCTL calls. Introduce a dedicated venus_inst mutex for the purpose of vb2 operations synchronization. Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: return P010 as preferred format for 10 bit decodeDikshita Agarwal
If bit depth is detected as 10 bit by firmware, return P010 as preferred decoder format to the client. Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: add handling of bit depth change from firmwareDikshita Agarwal
Set opb format to TP10_UWC and dpb to client set format when bit depth change to 10 bit is detecting by firmware. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: update calculation for dpb buffersDikshita Agarwal
Use dpb color format, width and height of output port for calculating buffer size of dpb buffers. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: add support for V4L2_PIX_FMT_P010 color formatDikshita Agarwal
add V4L2_PIX_FMT_P010 as supported color format for decoder. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: replace arrary index with enum for supported formatsDikshita Agarwal
Use enums to list supported formats for encoder and decoder instead of array index which was a error prone design. Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 12:11:41 +0000