| Age | Commit message (Collapse) | Author |
|---|
|
This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues, such as the
TX timeout error, have been resolved.
commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
power save stress test")
With this setting, the driver will send the vendor command to FW at
startup, to enable power save feature.
User can disable this feature using the following vendor command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
syzbot is reporting that calling hci_release_dev() from hci_error_reset()
due to hci_dev_put() from hci_error_reset() can cause deadlock at
destroy_workqueue(), for hci_error_reset() is called from
hdev->req_workqueue which destroy_workqueue() needs to flush.
We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are
queued into hdev->workqueue and hdev->{power_on,error_reset} which are
queued into hdev->req_workqueue are no longer running by the moment
destroy_workqueue(hdev->workqueue);
destroy_workqueue(hdev->req_workqueue);
are called from hci_release_dev().
Call cancel_work_sync() on these work items from hci_unregister_dev()
as soon as hdev->list is removed from hci_dev_list.
Reported-by: syzbot <syzbot+da0a9c9721e36db712e8@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=da0a9c9721e36db712e8
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed
serdev") will cause below regression issue:
BT can't be enabled after below steps:
cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure
if property enable-gpios is not configured within DT|ACPI for QCA6390.
The commit is to fix a use-after-free issue within qca_serdev_shutdown()
by adding condition to avoid the serdev is flushed or wrote after closed
but also introduces this regression issue regarding above steps since the
VSC is not sent to reset controller during warm reboot.
Fixed by sending the VSC to reset controller within qca_serdev_shutdown()
once BT was ever enabled, and the use-after-free issue is also fixed by
this change since the serdev is still opened before it is flushed or wrote.
Verified by the reported machine Dell XPS 13 9310 laptop over below two
kernel commits:
commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of bluetooth-next tree.
commit b23d98d46d28 ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of linus mainline tree.
Fixes: 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed serdev")
Cc: stable@vger.kernel.org
Reported-by: Wren Turkal <wt@penguintechs.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218726
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Tested-by: Wren Turkal <wt@penguintechs.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
qos->ucast interval reffers to the SDU interval, and should not
be set to the interval value reported by the LE CIS Established
event since the latter reffers to the ISO interval. These two
interval are not the same thing:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 6, Part G
Isochronous interval:
The time between two consecutive BIS or CIS events (designated
ISO_Interval in the Link Layer)
SDU interval:
The nominal time between two consecutive SDUs that are sent or
received by the upper layer.
So this instead uses the following formula from the spec to calculate
the resulting SDU interface:
BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 6, Part G
page 3075:
Transport_Latency_C_To_P = CIG_Sync_Delay + (FT_C_To_P) ×
ISO_Interval + SDU_Interval_C_To_P
Transport_Latency_P_To_C = CIG_Sync_Delay + (FT_P_To_C) ×
ISO_Interval + SDU_Interval_P_To_C
Link: https://github.com/bluez/bluez/issues/823
Fixes: 2be22f1941d5 ("Bluetooth: hci_event: Fix parsing of CIS Established Event")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
check pdata return of skb_pull_data, instead of data.
Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Vijay Satija <vijay.satija@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
We are releasing a single msgid, so the order argument to
bitmap_release_region must be zero.
Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards")
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Some Broadcom controllers found on Apple Silicon machines abuse the
reserved bits inside the PHY fields of LE Extended Advertising Report
events for additional flags. Add a quirk to drop these and correctly
extract the Primary/Secondary_PHY field.
The following excerpt from a btmon trace shows a report received with
"Reserved" for "Primary PHY" on a 4388 controller:
> HCI Event: LE Meta Event (0x3e) plen 26
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x2515
Props: 0x0015
Connectable
Directed
Use legacy advertising PDUs
Data status: Complete
Reserved (0x2500)
Legacy PDU Type: Reserved (0x2515)
Address type: Random (0x01)
Address: 00:00:00:00:00:00 (Static)
Primary PHY: Reserved
Secondary PHY: No packets
SID: no ADI field (0xff)
TX power: 127 dBm
RSSI: -60 dBm (0xc4)
Periodic advertising interval: 0.00 msec (0x0000)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (Apple, Inc.)
Data length: 0x00
Cc: stable@vger.kernel.org
Fixes: 2e7ed5f5e69b ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync")
Reported-by: Janne Grunau <j@jannau.net>
Closes: https://lore.kernel.org/all/Zjz0atzRhFykROM9@robin
Tested-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In nouveau_connector_get_modes(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a possible NULL pointer
dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Fixes: 6ee738610f41 ("drm/nouveau: Add DRM driver for NVIDIA GPUs")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627074204.3023776-1-make24@iscas.ac.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Due to a late review, revert and re-fix a recent crasher fix
* tag 'nfsd-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "nfsd: fix oops when reading pool_stats before server is started"
nfsd: initialise nfsd_info.mutex early.
|
|
Pull bcachefs fixes from Kent Overstreet:
"Simple stuff:
- NULL ptr/err ptr deref fixes
- fix for getting wedged on shutdown after journal error
- fix missing recalc_capacity() call, capacity now changes correctly
after a device goes read only
however: our capacity calculation still doesn't take into account
when we have mixed ro/rw devices and the ro devices have data on
them, that's going to be a more involved fix to separate accounting
for "capacity used on ro devices" and "capacity used on rw devices"
- boring syzbot stuff
Slightly more involved:
- discard, invalidate workers are now per device
this has the effect of simplifying how we take device refs in these
paths, and the device ref cleanup fixes a longstanding race between
the device removal path and the discard path
- fixes for how the debugfs code takes refs on btree_trans objects we
have debugfs code that prints in use btree_trans objects.
It uses closure_get() on trans->ref, which is mainly for the cycle
detector, but the debugfs code was using it on a closure that may
have hit 0, which is not allowed; for performance reasons we cannot
avoid having not-in-use transactions on the global list.
Introduce some new primitives to fix this and make the
synchronization here a whole lot saner"
* tag 'bcachefs-2024-06-28' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix kmalloc bug in __snapshot_t_mut
bcachefs: Discard, invalidate workers are now per device
bcachefs: Fix shift-out-of-bounds in bch2_blacklist_entries_gc
bcachefs: slab-use-after-free Read in bch2_sb_errors_from_cpu
bcachefs: Add missing bch2_journal_do_writes() call
bcachefs: Fix null ptr deref in journal_pins_to_text()
bcachefs: Add missing recalc_capacity() call
bcachefs: Fix btree_trans list ordering
bcachefs: Fix race between trans_put() and btree_transactions_read()
closures: closure_get_not_zero(), closure_return_sync()
bcachefs: Make btree_deadlock_to_text() clearer
bcachefs: fix seqmutex_relock()
bcachefs: Fix freeing of error pointers
|
|
Pull block fixes from Jens Axboe:
"NVMe fixes via Keith:
- Fabrics fixes (Hannes)
- Missing module description (Jeff)
- Clang warning fix (Nathan)"
* tag 'block-6.10-20240628' of git://git.kernel.dk/linux:
nvmet-fc: Remove __counted_by from nvmet_fc_tgt_queue.fod[]
nvmet: make 'tsas' attribute idempotent for RDMA
nvme: fixup comment for nvme RDMA Provider Type
nvme-apple: add missing MODULE_DESCRIPTION()
nvmet: do not return 'reserved' for empty TSAS values
nvme: fix NVME_NS_DEAC may incorrectly identifying the disk as EXT_LBA.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Two cache flushing fixes for Intel and AMD drivers
- AMD guest translation enabling fix
- Update IOMMU tree location in MAINTAINERS file
* tag 'iommu-fixes-v6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Update IOMMU tree location
iommu/amd: Fix GT feature enablement again
iommu/vt-d: Fix missed device TLB cache tag
iommu/amd: Invalidate cache before removing device from domain list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"An assortment of driver fixes and two commits addressing a bad
behavior of the GPIO uAPI when reconfiguring requested lines.
- fix a race condition in i2c transfers by adding a missing i2c lock
section in gpio-pca953x
- validate the number of obtained interrupts in gpio-davinci
- add missing raw_spinlock_init() in gpio-graniterapids
- fix bad character device behavior: disallow GPIO line
reconfiguration without set direction both in v1 and v2 uAPI"
* tag 'gpio-fixes-for-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: cdev: Ignore reconfiguration without direction
gpiolib: cdev: Disallow reconfiguration without direction (uAPI v1)
gpio: graniterapids: Add missing raw_spinlock_init()
gpio: davinci: Validate the obtained number of IRQs
gpio: pca953x: fix pca953x_irq_bus_sync_unlock race
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A pair of small arm64 fixes for -rc6.
One is a fix for the recently merged uffd-wp support (which was
triggering a spurious warning) and the other is a fix to the clearing
of the initial idmap pgd in some configurations
Summary:
- Fix spurious page-table warning when clearing PTE_UFFD_WP in a live
pte
- Fix clearing of the idmap pgd when using large addressing modes"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Clear the initial ID map correctly before remapping
arm64: mm: Permit PTE SW bits to change in live mappings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat fixes from Len Brown:
"Fix three recent minor turbostat regressions"
* tag 'v6.10-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: Add local build_bug.h header for snapshot target
tools/power turbostat: Fix unc freq columns not showing with '-q' or '-l'
tools/power turbostat: option '-n' is ambiguous
|
|
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the
ports member of 'struct mxser_board' triggers this restriction,
resulting in:
drivers/tty/mxser.c:291:2: error: 'counted_by' should not be applied to an array with element of unknown size because 'struct mxser_port' is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
291 | struct mxser_port ports[] __counted_by(nports);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: <stable@vger.kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2026
Fixes: f34907ecca71 ("mxser: Annotate struct mxser_board with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240529-drop-counted-by-ports-mxser-board-v1-1-0ab217f4da6d@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
An unintended consequence of commit 9c573cd31343 ("randomize_kstack:
Improve entropy diffusion") was that the per-architecture entropy size
filtering reduced how many bits were being added to the mix, rather than
how many bits were being used during the offsetting. All architectures
fell back to the existing default of 0x3FF (10 bits), which will consume
at most 1KiB of stack space. It seems that this is working just fine,
so let's avoid the confusion and update everything to use the default.
The prior intent of the per-architecture limits were:
arm64: capped at 0x1FF (9 bits), 5 bits effective
powerpc: uncapped (10 bits), 6 or 7 bits effective
riscv: uncapped (10 bits), 6 bits effective
x86: capped at 0xFF (8 bits), 5 (x86_64) or 6 (ia32) bits effective
s390: capped at 0xFF (8 bits), undocumented effective entropy
Current discussion has led to just dropping the original per-architecture
filters. The additional entropy appears to be safe for arm64, x86,
and s390. Quoting Arnd, "There is no point pretending that 15.75KB is
somehow safe to use while 15.00KB is not."
Co-developed-by: Yuntao Liu <liuyuntao12@huawei.com>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Fixes: 9c573cd31343 ("randomize_kstack: Improve entropy diffusion")
Link: https://lore.kernel.org/r/20240617133721.377540-1-liuyuntao12@huawei.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20240619214711.work.953-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/string_kunit.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/string_helpers_kunit.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240531-md-lib-string-v1-1-2738cf057d94@quicinc.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
We got another report that CT1000BX500SSD1 does not work with LPM.
If you look in libata-core.c, we have six different Crucial devices that
are marked with ATA_HORKAGE_NOLPM. This model would have been the seventh.
(This quirk is used on Crucial models starting with both CT* and
Crucial_CT*)
It is obvious that this vendor does not have a great history of supporting
LPM properly, therefore, add the ATA_HORKAGE_NOLPM quirk for all Crucial
BX SSD1 models.
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Alessandro Maggio <alex.tkd.alex@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240627105551.4159447-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
We cannot use CLONE_VFORK because we also need to wait for the timeout
signal.
Restore tests timeout by using the original fork() call in __run_test()
but also in __TEST_F_IMPL(). Also fix a race condition when waiting for
the test child process.
Because test metadata are shared between test processes, only the
parent process must set the test PID (child). Otherwise, t->pid may be
set to zero, leading to inconsistent error cases:
# RUN layout1.rule_on_mountpoint ...
# rule_on_mountpoint: Test ended in some other way [127]
# OK layout1.rule_on_mountpoint
ok 20 layout1.rule_on_mountpoint
As safeguards, initialize the "status" variable with a valid exit code,
and handle unknown test exits as errors.
The use of fork() introduces a new race condition in landlock/fs_test.c
which seems to be specific to hostfs bind mounts, but I haven't found
the root cause and it's difficult to trigger. I'll try to fix it with
another patch.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/r/9341d4db-5e21-418c-bf9e-9ae2da7877e1@sirena.org.uk
Fixes: a86f18903db9 ("selftests/harness: Fix interleaved scheduling leading to race conditions")
Fixes: 24cf65a62266 ("selftests/harness: Share _metadata between forked processes")
Link: https://lore.kernel.org/r/20240621180605.834676-1-mic@digikod.net
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Update the maintainers entries to the new location of the
IOMMU tree.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan into main
|
|
kexec on pseries disables AIL (reloc_on_exc), required for scv
instruction support, before other CPUs have been shut down. This means
they can execute scv instructions after AIL is disabled, which causes an
interrupt at an unexpected entry location that crashes the kernel.
Change the kexec sequence to disable AIL after other CPUs have been
brought down.
As a refresher, the real-mode scv interrupt vector is 0x17000, and the
fixed-location head code probably couldn't easily deal with implementing
such high addresses so it was just decided not to support that interrupt
at all.
Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Closes: https://lore.kernel.org/3b4b2943-49ad-4619-b195-bc416f1d1409@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Link: https://msgid.link/20240625134047.298759-1-npiggin@gmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Tariq Toukan says:
====================
mlx5 fixes 2024-06-27
This patchset provides fixes from the team to the mlx5 core and EN
drivers.
The first 3 patches by Daniel replace a buggy cap field with a newly
introduced one.
Patch 4 by Chris de-couples ingress ACL creation from a specific flow,
so it's invoked by other flows if needed.
Patch 5 by Jianbo fixes a possible missing cleanup of QoS objects.
Patches 6 and 7 by Leon fixes IPsec stats logic to better reflect the
traffic.
Series generated against:
commit 02ea312055da ("octeontx2-pf: Fix coverity and klockwork issues in octeon PF driver")
V2:
Fixed wrong cited SHA in patch 6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ConnectX devices lack ability to count payload data byte size which is
needed for SA to return to libreswan for rekeying.
As a solution let's approximate that by decreasing headers size from
total size counted by flow steering. The calculation doesn't take into
account any other headers which can be in the packet (e.g. IP extensions).
Fixes: 5a6cddb89b51 ("net/mlx5e: Update IPsec per SA packets/bytes count")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPsec SA statistics presents successfully decrypted and encrypted
packet and bytes, and not total handled by this SA. So update the
calculation logic to take into account failures.
Fixes: 6fb7f9408779 ("net/mlx5e: Connect mlx5 IPsec statistics with XFRM core")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the cited commit, mqprio_rl cleanup and free are mistakenly removed
in mlx5e_priv_cleanup(), and it causes the leakage of host memory and
firmware SCHEDULING_ELEMENT objects while changing eswitch mode. So,
add them back.
Fixes: 0bb7228f7096 ("net/mlx5e: Fix mqprio_rl handling on devlink reload")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, ingress acl is used for three features. It is created only
when vport metadata match and prio tag are enabled. But active-backup
lag mode also uses it. It is independent of vport metadata match and
prio tag. And vport metadata match can be disabled using the
following devlink command:
# devlink dev param set pci/0000:08:00.0 name esw_port_metadata \
value false cmode runtime
If ingress acl is not created, will hit panic when creating drop rule
for active-backup lag mode. If always create it, there will be about
5% performance degradation.
Fix it by creating ingress acl when needed. If esw_port_metadata is
true, ingress acl exists, then create drop rule using existing
ingress acl. If esw_port_metadata is false, create ingress acl and
then create drop rule.
Fixes: 1749c4c51c16 ("net/mlx5: E-switch, add drop rule support to ingress ACL")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Due a bug in the device max_num_eqs doesn't always reflect a written
value. As a result, setting max_io_eqs may not work but appear
successful. Instead write max_num_eqs_24b, which reflects correct
value.
Fixes: 93197c7c509d ("mlx5/core: Support max_io_eqs for a function")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A new capability with more bits is added. If it's set use that value as
the maximum number of EQs available.
This cap is also writable by the vhca_resource_manager to allow limiting
the number of EQs available to SFs and VFs.
Fixes: 93197c7c509d ("mlx5/core: Support max_io_eqs for a function")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Expose new capability to support changing the number of EQs available
to other functions.
Fixes: 93197c7c509d ("mlx5/core: Support max_io_eqs for a function")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some production workloads we noticed that connections could
sometimes close extremely prematurely with ETIMEDOUT after
transmitting only 1 TLP and RTO retransmission (when we would normally
expect roughly tcp_retries2 = TCP_RETR2 = 15 RTOs before a connection
closes with ETIMEDOUT).
From tracing we determined that these workloads can suffer from a
scenario where in fast recovery, after some retransmits, a DSACK undo
can happen at a point where the scoreboard is totally clear (we have
retrans_out == sacked_out == lost_out == 0). In such cases, calling
tcp_try_keep_open() means that we do not execute any code path that
clears tp->retrans_stamp to 0. That means that tp->retrans_stamp can
remain erroneously set to the start time of the undone fast recovery,
even after the fast recovery is undone. If minutes or hours elapse,
and then a TLP/RTO/RTO sequence occurs, then the start_ts value in
retransmits_timed_out() (which is from tp->retrans_stamp) will be
erroneously ancient (left over from the fast recovery undone via
DSACKs). Thus this ancient tp->retrans_stamp value can cause the
connection to die very prematurely with ETIMEDOUT via
tcp_write_err().
The fix: we change DSACK undo in fast recovery (TCP_CA_Recovery) to
call tcp_try_to_open() instead of tcp_try_keep_open(). This ensures
that if no retransmits are in flight at the time of DSACK undo in fast
recovery then we properly zero retrans_stamp. Note that calling
tcp_try_to_open() is more consistent with other loss recovery
behavior, since normal fast recovery (CA_Recovery) and RTO recovery
(CA_Loss) both normally end when tp->snd_una meets or exceeds
tp->high_seq and then in tcp_fastretrans_alert() the "default" switch
case executes tcp_try_to_open(). Also note that by inspection this
change to call tcp_try_to_open() implies at least one other nice bug
fix, where now an ECE-marked DSACK that causes an undo will properly
invoke tcp_enter_cwr() rather than ignoring the ECE mark.
Fixes: c7d9d6a185a7 ("tcp: undo on DSACK during recovery")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the definition of BSS_CHANGED_UNSOL_BCAST_PROBE_RESP so that
not all higher bits get set, 1<<31 is a signed variable, so when
we do
u64 changed = BSS_CHANGED_UNSOL_BCAST_PROBE_RESP;
we get sign expansion, so the value is 0xffff'ffff'8000'0000 and
that's clearly not desired. Use BIT_ULL() to make it unsigned as
well as the right type for the change flags.
Fixes: 178e9d6adc43 ("wifi: mac80211: fix unsolicited broadcast probe config")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240627104257.06174d291db2.Iba0d642916eb78a61f8ab2cc5ca9280783d9c1db@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Retrieving the system framebuffer's parent device in sysfb_init()
increments the parent device's reference count. Hence release the
reference before leaving the init function.
Adding the sysfb platform device acquires and additional reference
for the parent. This keeps the parent device around while the system
framebuffer is in use.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 9eac534db001 ("firmware/sysfb: Set firmware-framebuffer parent device")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: <stable@vger.kernel.org> # v6.9+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625081818.15696-1-tzimmermann@suse.de
|
|
Fixes compilation errors for Makefile snapshot target described in:
commit 231ce08b662a ("tools/power turbostat: Add "snapshot:" Makefile target")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Commit 78464d7681f7 ("tools/power turbostat: Add columns for clustered
uncore frequency") introduced 'probe_intel_uncore_frequency_cluster()'
in a way which prevents printing uncore frequency columns if either of
the '-q' or '-l' options are used. Systems which do not have multiple
uncore frequencies per package are unaffected by this regression.
Fix the function so that uncore frequency columns are shown when either
the '-l' or '-q' option is used by checking if 'quiet' is true after
adding counters for the uncore frequency columns.
Fixes: 78464d7681f7 ("tools/power turbostat: Add columns for clustered uncore frequency")
Signed-off-by: Adam Hawley <adam.james.hawley@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
In some cases specifying the '-n' command line argument will cause
turbostat to fail. For instance 'turbostat -n 1' works fine; however,
'turbostat -n 1 -d' will fail. This is the result of the first call
to getopt_long_only() where "MP" is specified as the optstring. This can
be easily fixed by changing the optstring from "MP" to "MPn:" to remove
ambiguity between the arguments.
tools/power turbostat: option '-n' is ambiguous; possibilities: '-num_iterations' '-no-msr' '-no-perf'
Fixes: a0e86c90b83c ("tools/power turbostat: Add --no-perf option")
Signed-off-by: David Arcari <darcari@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pyll crypto fix from Herbert Xu:
"Fix a build failure in qat"
* tag 'v6.10-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qat - fix linking errors when PCI_IOV is disabled
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes, mostly amdgpu with some minor fixes in other places,
along with a fix for a very narrow UAF race in the pid handover code.
core:
- fix refcounting race on pid handover
fbdev:
- Fix fb_info when vmalloc is used, regression from
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM.
amdgpu:
- SMU 14.x fix
- vram info parsing fix
- mode1 reset fix
- LTTPR fix
- Virtual display fix
- Avoid spurious error in PSP init
i915:
- Fix potential UAF due to race on fence register revocation
nouveau
- nouveau tv mode fixes
panel:
- Add KOE TX26D202VM0BWA timings"
* tag 'drm-fixes-2024-06-28' of https://gitlab.freedesktop.org/drm/kernel:
drm/drm_file: Fix pid refcounting race
drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_ld_modes
drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_hd_modes
drm/amdgpu: Don't show false warning for reg list
drm/amdgpu: avoid using null object of framebuffer
drm/amd/display: Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is present
drm/amdgpu: Fix pci state save during mode-1 reset
drm/amdgpu/atomfirmware: fix parsing of vram_info
drm/amd/swsmu: add MALL init support workaround for smu_v14_0_1
drm/i915/gt: Fix potential UAF by revoke of fence registers
drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWA
drm/fbdev-dma: Only set smem_start is enable per module option
|
|
Fix copy-paste error in the code comment. The code refers to
LED blinking configuration, not brightness configuration. It
was likely copied from comment above this one which does
refer to brightness configuration.
Fixes: 4e901018432e ("net: phy: phy_device: Call into the PHY driver to set LED blinking")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240626030638.512069-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
<maarten.lankhorst@linux.intel.com>, Maxime Ripard
<mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>
filp->pid is supposed to be a refcounted pointer; however, before this
patch, drm_file_update_pid() only increments the refcount of a struct
pid after storing a pointer to it in filp->pid and dropping the
dev->filelist_mutex, making the following race possible:
process A process B
========= =========
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid B>, 1)
mutex_unlock(&dev->filelist_mutex)
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid A>, 1)
mutex_unlock(&dev->filelist_mutex)
get_pid(<pid A>)
synchronize_rcu()
put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here ***
get_pid(<pid B>) *** UAF ***
synchronize_rcu()
put_pid(<pid A>)
As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y
because it requires RCU to detect a quiescent state in code that is not
explicitly calling into the scheduler.
This race leads to use-after-free of a "struct pid".
It is probably somewhat hard to hit because process A has to pass
through a synchronize_rcu() operation while process B is between
mutex_unlock() and get_pid().
Fix it by ensuring that by the time a pointer to the current task's pid
is stored in the file, an extra reference to the pid has been taken.
This fix also removes the condition for synchronize_rcu(); I think
that optimization is unnecessary complexity, since in that case we
would usually have bailed out on the lockless check above.
Fixes: 1c7a387ffef8 ("drm: Update file owner during use")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.10-rc6:
- Fix potential UAF due to race on fence register revocation
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87ikxudcpd.fsf@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Modify the intel_pstate driver to use HWP to initialize the ITMT
scheduler extension if ACPI CPPC cannot be used for that, which is the
case on some hybrid x86 systems (Rafael Wysocki)"
* tag 'pm-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Use HWP to initialize ITMT if CPPC is missing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Replace an earlier fix for a recent regression in the Step-Wise
thermal governor that was not effective in all of the relevant cases
(Rafael Wysocki)"
* tag 'thermal-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_step_wise: Go straight to instance->lower when mitigation is over
|
|
Pull io_uring fixes from Jens Axboe:
"Removal of a struct member that's unused since the 6.10 merge window,
and a fix for a regression in SQPOLL wakeups, bringing it back to how
it worked before the SQPOLL local task_work"
* tag 'io_uring-6.10-20240627' of git://git.kernel.dk/linux:
io_uring: signal SQPOLL task_work with TWA_SIGNAL_NO_IPI
io_uring: remove dead struct io_submit_state member
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few changes:
- maintainers: Larry Finger sadly passed away
- maintainers: ath trees are in their group now
- TXQ FQ quantum configuration fix
- TI wl driver: work around stuck FW in AP mode
- mac80211: disable softirqs in some new code
needing that
* tag 'wireless-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: update ath.git location
MAINTAINERS: Remembering Larry Finger
wifi: mac80211: disable softirqs for queued frame handling
wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM values
wifi: wlcore: fix wlcore AP mode
====================
Link: https://patch.msgid.link/20240627083627.15312-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.10
- Fabrics fixes (Hannes)
- Missing module description (Jeff)
- Clang warning fix (Nathan)"
* tag 'nvme-6.10-2024-06-27' of git://git.infradead.org/nvme:
nvmet-fc: Remove __counted_by from nvmet_fc_tgt_queue.fod[]
nvmet: make 'tsas' attribute idempotent for RDMA
nvme: fixup comment for nvme RDMA Provider Type
nvme-apple: add missing MODULE_DESCRIPTION()
nvmet: do not return 'reserved' for empty TSAS values
nvme: fix NVME_NS_DEAC may incorrectly identifying the disk as EXT_LBA.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Add missing virt_to_phys() conversion for directed interrupt bit
vectors
- Fix broken configuration change notifications for virtio-ccw
- Fix sclp_init() cleanup path on failure and as result - fix a list
double add warning
- Fix unconditional adjusting of GOT entries containing undefined weak
symbols that resolve to zero
* tag 's390-6.10-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot: Do not adjust GOT entries for undef weak sym
s390/sclp: Fix sclp_init() cleanup on failure
s390/virtio_ccw: Fix config change notifications
s390/pci: Add missing virt_to_phys() for directed DIBV
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are some bugfixes for system call ABI issues I found while
working on a cleanup series. None of these are urgent since these bugs
have gone unnoticed for many years, but I think we probably want to
backport them all to stable kernels, so it makes sense to have the
fixes included as early as possible.
One more fix addresses a compile-time warning in kallsyms that was
uncovered by a patch I did to enable additional warnings in 6.10. I
had mistakenly thought that this fix was already merged through the
module tree, but as Geert pointed out it was still missing"
* tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
kallsyms: rework symbol lookup return codes
linux/syscalls.h: add missing __user annotations
syscalls: mmap(): use unsigned offset type consistently
s390: remove native mmap2() syscall
hexagon: fix fadvise64_64 calling conventions
csky, hexagon: fix broken sys_sync_file_range
sh: rework sync_file_range ABI
powerpc: restore some missing spu syscalls
parisc: use generic sys_fanotify_mark implementation
parisc: use correct compat recv/recvfrom syscalls
sparc: fix compat recv/recvfrom syscalls
sparc: fix old compat_sys_select()
syscalls: fix compat_sys_io_pgetevents_time64 usage
ftruncate: pass a signed offset
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix quota root leak after quota disable failure
- fix condition when checking if a zone can be added as free
- allocate inode in NOFS context during logging or tree-log replay
- handle raid-stripe-tree lookup correctly during scrub
* tag 'for-6.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: qgroup: fix quota root leak after quota disable failure
btrfs: scrub: handle RST lookup error correctly
btrfs: zoned: fix initial free space detection
btrfs: use NOFS context when getting inodes during logging and log replay
|
