summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-15iwlwifi: FW API: reference enum in docs of modify_maskJohannes Berg
Add a reference to the correct enum rather than showing the pattern of the actual constants. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: print rate_n_flags in a pretty formatMordechay Goodstein
Use the rs_pretty_print_rate() function to print the rate_n_flags in more human-readable format. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: adapt the code to use api ver 11Tova Mussai
FW scan api ver 11 adds support for some new features, in this version the fw did also some cleanup in the api, which causes the driver not to be able to use the current scan req struct. Therefore, in this patch the driver has new version for the scan command code Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: Create function to build scan cmdTova Mussai
Currently, the code to build scan cmd is duplicated in iwl_mvm_reg_scan_start and iwl_mvm_sched_scan_start. Create a function to build this command, and call the function instead. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: scan: create function for scan scheduling paramsTova Mussai
In the next patch, this code will be used from different places. As preparation export this code into function. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: dbg_ini: support dump collection upon assert during D3Shahar S Matityahu
add assert time point in the D3 resume flow in case there was an assert during D3. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: pcie: make iwl_pcie_gen2_update_byte_tbl staticEmmanuel Grumbach
It is called within tx-gen2.c only. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: in VHT connection use only VHT capabilitiesMordechay Goodstein
mac80211 limits amsdu size to the minimum of HT and VHT capabilities but since in a VHT connection we don't transmit HT frames we can discard HT limits. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: nvm: update iwl_uhb_nvm_channelsTova Mussai
Change the UHB channels to start from 1 to match the specs (11ax Draft 5.0). Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: remove else-if in iwl_send_phy_cfg_cmd()Luca Coelho
We return in the if block, so it's unnecessary to have an else statement. Remove it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15iwlwifi: mvm: fix support for single antenna diversityLuca Coelho
When the single antenna diversity support was sent upstream, only some definitions were sent, due to a bad revert. Fix this by adding the actual code. Fixes: 5952e0ec3f05 ("iwlwifi: mvm: add support for single antenna diversity") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: add support for getting/setting transmit powerMikhail Karpenko
Add new command for getting/setting current transmit power and propagate requests from user space to firmware. Signed-off-by: Mikhail Karpenko <mkarpenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: handle MIC failure event from firmwareSergey Matyukevich
Report MIC failure from firmware to cfg80211 subsystem using dedicated callback cfg80211_michael_mic_failure. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: send EAPOL frames via control pathSergey Matyukevich
Send EAPOL frames via control path so they can be treated in a different way rather than normal data frames. In this case EAPOLs are sent with higher priority and with disabled aggregation and encryption. Besides, all devices benefit from sending EAPOL frames via high priority path, so move the functionality from chip specific to common code. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: modify Rx descriptors queue setupSergey Matyukevich
Rx descriptors queue length is hardware specific. Current common default value is no more than an accident. So move Rx descriptor queue setup to platform PCIe backend in the same way as it is already done for Tx. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: fix invalid channel information outputSergey Matyukevich
Do not attempt to print frequency for an invalid channel provided by firmware. That channel may simply not exist. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: fix debugfs support for multiple cardsSergey Matyukevich
Fix merge artifact for commit 0b68fe10b8e8 ("qtnfmac: modify debugfs to support multiple cards") and finally add debugfs support for multiple qtnfmac wireless cards. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14qtnfmac: fix using skb after freeSergey Matyukevich
KASAN reported use-after-free error: [ 995.220767] BUG: KASAN: use-after-free in qtnf_cmd_send_with_reply+0x169/0x3e0 [qtnfmac] [ 995.221098] Read of size 2 at addr ffff888213d1ded0 by task kworker/1:1/71 The issue in qtnf_cmd_send_with_reply impacts all the commands that do not need response other then return code. For such commands, consume_skb is used for response skb and right after that return code in response skb is accessed. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtl8xxxu: Add support for Edimax EW-7611ULBJes Sorensen
A number of people have reported the Edimax EW-7611ULB works fine. Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtlwifi: rtl8192de: Fix missing enable interrupt flagLarry Finger
In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), the flag that indicates that interrupts are enabled was never set. In addition, there are several places when enable/disable interrupts were commented out are restored. A sychronize_interrupts() call is removed. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # v3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtlwifi: rtl8192de: Fix missing callback that tests for hw release of bufferLarry Finger
In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), a callback needed to check if the hardware has released a buffer indicating that a DMA operation is completed was not added. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # v3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtlwifi: rtl8192de: Fix missing code to retrieve RX buffer addressLarry Finger
In commit 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers"), a callback to get the RX buffer address was added to the PCI driver. Unfortunately, driver rtl8192de was not modified appropriately and the code runs into a WARN_ONCE() call. The use of an incorrect array is also fixed. Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Cc: Stable <stable@vger.kernel.org> # 3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-08rtw88: signal completion even on firmware-request failureBrian Norris
Otherwise, the waiters (e.g., "modprobe rtwpci") will block forever. Fixes: f530c1961af2 ("rtw88: fix potential NULL pointer access for firmware") Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06rtw88: fix potential NULL pointer access for firmwareYan-Hsuan Chuang
Driver could access a NULL firmware pointer if we don't return here. Fixes: 5195b90426409 ("rtw88: avoid FW info flood") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06rtlwifi: fix memory leak in rtl92c_set_fw_rsvdpagepkt()Ping-Ke Shih
This leak was found by testing the EDIMAX EW-7612 on Raspberry Pi 3B+ with Linux 5.4-rc5 (multi_v7_defconfig + rtlwifi + kmemleak) and noticed a single memory leak during probe: unreferenced object 0xec13ee40 (size 176): comm "kworker/u8:1", pid 36, jiffies 4294939321 (age 5580.790s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<fc1bbb3e>] __netdev_alloc_skb+0x9c/0x164 [<863dfa6e>] rtl92c_set_fw_rsvdpagepkt+0x254/0x340 [rtl8192c_common] [<9572be0d>] rtl92cu_set_hw_reg+0xf48/0xfa4 [rtl8192cu] [<116df4d8>] rtl_op_bss_info_changed+0x234/0x96c [rtlwifi] [<8933575f>] ieee80211_bss_info_change_notify+0xb8/0x264 [mac80211] [<d4061e86>] ieee80211_assoc_success+0x934/0x1798 [mac80211] [<e55adb56>] ieee80211_rx_mgmt_assoc_resp+0x174/0x314 [mac80211] [<5974629e>] ieee80211_sta_rx_queued_mgmt+0x3f4/0x7f0 [mac80211] [<d91091c6>] ieee80211_iface_work+0x208/0x318 [mac80211] [<ac5fcae4>] process_one_work+0x22c/0x564 [<f5e6d3b6>] worker_thread+0x44/0x5d8 [<82c7b073>] kthread+0x150/0x154 [<b43e1b7d>] ret_from_fork+0x14/0x2c [<794dff30>] 0x0 It is because 8192cu doesn't implement usb_cmd_send_packet(), and this patch just frees the skb within the function to resolve memleak problem by now. Since 8192cu doesn't turn on fwctrl_lps that needs to download command packet for firmware via the function, applying this patch doesn't affect driver behavior. Reported-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06rt2800: remove errornous duplicate conditionDaniel Golle
On 2019-10-28 06:07, wbob wrote: > Hello Roman, > > while reading around drivers/net/wireless/ralink/rt2x00/rt2800lib.c > I stumbled on what I think is an edit of yours made in error in march > 2017: > > https://github.com/torvalds/linux/commit/41977e86#diff-dae5dc10da180f3b055809a48118e18aR5281 > > RT6352 in line 5281 should not have been introduced as the "else if" > below line 5291 can then not take effect for a RT6352 device. Another > possibility is for line 5291 to be not for RT6352, but this seems > very unlikely. Are you able to clarify still after this substantial time? > > 5277: static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) > ... > 5279: } else if (rt2x00_rt(rt2x00dev, RT5390) || > 5280: rt2x00_rt(rt2x00dev, RT5392) || > 5281: rt2x00_rt(rt2x00dev, RT6352)) { > ... > 5291: } else if (rt2x00_rt(rt2x00dev, RT6352)) { > ... Hence remove errornous line 5281 to make the driver actually execute the correct initialization routine for MT7620 chips. As it was requested by Stanislaw Gruszka remove setting values of MIMO_PS_CFG and TX_PIN_CFG. MIMO_PS_CFG is responsible for MIMO power-safe mode (which is disabled), hence we can drop setting it. TX_PIN_CFG is set correctly in other functions, and as setting this value breaks some devices, rather don't set it here during init, but only modify it later on. Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Reported-by: wbob <wbob@jify.de> Reported-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06rtlwifi: rtl8225se: remove some unused const variablesYueHaibing
drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:83:17: warning: 'rtl8225sez2_tx_power_cck' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:79:17: warning: 'rtl8225sez2_tx_power_cck_A' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:75:17: warning: 'rtl8225sez2_tx_power_cck_B' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:71:17: warning: 'rtl8225sez2_tx_power_cck_ch14' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:62:17: warning: 'rtl8225se_tx_power_ofdm' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:53:17: warning: 'rtl8225se_tx_power_cck_ch14' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:44:17: warning: 'rtl8225se_tx_power_cck' defined but not used [-Wunused-const-variable=] drivers/net/wireless//realtek/rtl818x/rtl8180/rtl8225se.c:40:17: warning: 'rtl8225se_tx_gain_cck_ofdm' defined but not used [-Wunused-const-variable=] They are never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06brcmsmac: remove set but not used variablesYueHaibing
drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c:841:7: warning: variable free_pdu set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c:842:30: warning: variable tx_rts_count set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c:842:6: warning: variable tx_rts set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c:843:7: warning: variable totlen set but not used [-Wunused-but-set-variable] They are never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06rtw88: raise LPS threshold to 50, for less power consumptionYan-Hsuan Chuang
The LPS threshold was set to 2, means driver will leave LPS mode if there is more than 2 frames TX/RX for every 2 seconds. This makes driver enter/leave LPS frequently even if we just "ping -i1" to the others. Apparently we do not want to leave LPS mode if there is only some background traffics or web surfing. By experiment, set this to 50 is a more reasonable value to lower the over all power consumption. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06iwlegacy: Remove redundant variable "ret"zhong jiang
local variable "ret" is not used. hence it is safe to remove and just return 0. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06ipw2x00: Remove redundant variable "rc"zhong jiang
local variable "rc" is not used. It is safe to remove and There is only one caller of libipw_qos_convert_ac_to_parameters(). hence make it void Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-06Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 5.5. Major changes: wil6210 * add SPDX license identifiers
2019-11-05Merge tag 'wireless-drivers-next-2019-11-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.5 First set of patches for 5.5. The most active driver here clearly is rtw88, lots of patches for it. More quiet on other drivers, smaller fixes and cleanups all over. This pull request also has a trivial conflict, the report and example resolution here: https://lkml.kernel.org/r/20191031111242.50ab1eca@canb.auug.org.au Major changes: rtw88 * add deep power save support * add mac80211 software tx queue (wake_tx_queue) support * enable hardware rate control * add TX-AMSDU support * add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support * add power tracking support * add 802.11ac beamformee support * add set_bitrate_mask support * add phy_info debugfs to show Tx/Rx physical status * add RFE type 3 support for 8822b ath10k * add support for hardware rfkill on devices where firmware supports it rtl8xxxu * add bluetooth co-existence support for single antenna iwlwifi * Revamp the debugging infrastructure ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05Merge tag 'batadv-next-for-davem-20191105' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Simplify batadv_v_ogm_aggr_list_free using skb_queue_purge, by Christophe Jaillet - Replace aggr_list_lock with lock free skb handlers, by Christophe Jaillet - explicitly mark fallthrough cases, by Sven Eckelmann - Drop lockdep.h include from soft-interface.c, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05r8152: Add macpassthru support for ThinkPad Thunderbolt 3 Dock Gen 2Kai-Heng Feng
ThinkPad Thunderbolt 3 Dock Gen 2 is another docking station that uses RTL8153 based USB ethernet. The device supports macpassthru, but it failed to pass the test of -AD, -BND and -BD. Simply bypass these tests since the device supports this feature just fine. Also the ACPI objects have some differences between Dell's and Lenovo's, so make those ACPI infos no longer hardcoded. BugLink: https://bugs.launchpad.net/bugs/1827961 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05cxgb4: Add pci reset handlerVishal Kulkarni
This patch implements reset_prepare and reset_done, which are used for handling FLR. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05Merge branch 'bnx2x-cnic-Enable-Multi-Cos'David S. Miller
Sudarsana Reddy Kalluru says: ==================== bnx2x/cnic: Enable Multi-Cos. The patch series enables Multi-cos feature in the driver. This require the use of new firmware 7.13.15.0. Patch (1) adds driver changes to use new FW. Patches (2) - (3) enables multi-cos functionality in bnx2x driver. Patch (4) adds cnic driver change as required by new FW. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05cnic: Set fp_hsi_ver as part of CLIENT_SETUP ramrodManish Rangankar
The new FW has added extra validation for HSI version to make FW backward compatible with older VF drivers. Hence set fp_hsi_ver to Fast Path HSI version of the FW in use. Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05bnx2x: Fix PF-VF communication over multi-cos queues.Manish Chopra
PF driver doesn't enable tx-switching for all cos queues/clients, which causes packets drop from PF to VF. Fix this by enabling tx-switching on all cos queues/clients. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05bnx2x: Enable Multi-Cos feature.Sudarsana Reddy Kalluru
FW version 7.13.15 addresses the issue in Multi-cos implementation. This patch re-enables the Multi-Cos support in the driver. Fixes: d1f0b5dce8fd ("bnx2x: Disable multi-cos feature.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05bnx2x: Utilize FW 7.13.15.0.Sudarsana Reddy Kalluru
Commit 97a27d6d6e8d "bnx2x: Add FW 7.13.15.0" added said .bin FW to linux-firmware tree. This FW addresses few important issues in the earlier FW release. This patch incorporates FW 7.13.15.0 in the bnx2x driver. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05net: ethernet: emac: Fix phy mode typeAndrew Lunn
Pass a phy_interface_t to of_get_phy_mode(), by changing the type of phy_mode in the device structure. This then requires that zmii_attach() is also changes, since it takes a pointer to phy_mode. Fixes: 0c65b2b90d13 ("net: of_get_phy_mode: Change API to solve int/unit warnings") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05Merge branch 'net_sched-convert-packet-counters-to-64bit'David S. Miller
Eric Dumazet says: ==================== net_sched: convert packet counters to 64bit This small patch series add 64bit support for packet counts. Fact that the counters were still 32bit has been quite painful. tc -s -d qd sh dev eth0 | head -3 qdisc mq 1: root Sent 665706335338 bytes 6526520373 pkt (dropped 2441, overlimits 0 requeues 91) backlog 0b 0p requeues 91 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05net_sched: add TCA_STATS_PKT64 attributeEric Dumazet
Now the kernel uses 64bit packet counters in scheduler layer, we want to export these counters to user space. Instead risking breaking user space by adding fields to struct gnet_stats_basic, add a new TCA_STATS_PKT64. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05net_sched: extend packet counter to 64bitEric Dumazet
After this change, qdisc packet counter is no longer a 32bit quantity. We still export 32bit values to user. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05net_sched: do not export gnet_stats_basic_packed to uapiEric Dumazet
gnet_stats_basic_packed was really meant to be private kernel structure. If this proves to be a problem, we will have to rename the in-kernel version. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05Merge branch 'mv88e6xxx-ATU-occupancy-as-devlink-resource'David S. Miller
Andrew Lunn says: ==================== mv88e6xxx ATU occupancy as devlink resource This patchset add generic support to DSA for devlink resources. The Marvell switch Address Translation Unit occupancy is then exported as a resource. In order to do this, the number of ATU entries is added to the per switch info structure. Helpers are added, and then the resource itself is then added. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05net: dsa: mv88e6xxx: Add ATU occupancy via devlink resourcesAndrew Lunn
The ATU can report how many entries it contains. It does this per bin, there being 4 bins in total. Export the ATU as a devlink resource, and provide a method the needed callback to get the resource occupancy. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05net: dsa: mv88e6xxx: global1_atu: Add helper for get nextAndrew Lunn
When retrieving the ATU statistics, and ATU get next has to be performed to trigger the ATU to collect the statistics. Export a helper from global1_atu to perform this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05net: dsa: mv88e6xxx: global2: Expose ATU stats registerAndrew Lunn
Add helpers to set/get the ATU statistics register. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>