summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-31perf trace: Augment non-syscall tracepoints with enum arguments with BTFHoward Chu
Before: perf $ ./perf trace -e timer:hrtimer_start --max-events=1 0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff974466c25f18, function: 0xffffffff89da5be0, expires: 377432432256753, softexpires: 377432432256753, mode: 10) After: perf $ ./perf trace -e timer:hrtimer_start --max-events=1 0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff9498a6ca5f18, function: 0xffffffffa77a5be0, expires: 4382442895089, softexpires: 4382442895089, mode: HRTIMER_MODE_ABS_PINNED_HARD) in which HRTIMER_MODE_ABS_PINNED_HARD is: perf $ pahole hrtimer_mode enum hrtimer_mode { HRTIMER_MODE_ABS = 0, HRTIMER_MODE_REL = 1, HRTIMER_MODE_PINNED = 2, HRTIMER_MODE_SOFT = 4, HRTIMER_MODE_HARD = 8, HRTIMER_MODE_ABS_PINNED = 2, HRTIMER_MODE_REL_PINNED = 3, HRTIMER_MODE_ABS_SOFT = 4, HRTIMER_MODE_REL_SOFT = 5, HRTIMER_MODE_ABS_PINNED_SOFT = 6, HRTIMER_MODE_REL_PINNED_SOFT = 7, HRTIMER_MODE_ABS_HARD = 8, HRTIMER_MODE_REL_HARD = 9, HRTIMER_MODE_ABS_PINNED_HARD = 10, HRTIMER_MODE_REL_PINNED_HARD = 11, }; Can also be tested by ./perf trace -e pagemap:mm_lru_insertion,timer:hrtimer_start,timer:hrtimer_init,skb:kfree_skb --max-events=10 (Chose these 4 events because they happen quite frequently.) However some enum arguments may not be contained in vmlinux BTF. To see what enum arguments are supported, use: vmlinux_dir $ bpftool btf dump file /sys/kernel/btf/vmlinux > vmlinux vmlinux_dir $ while read l; do grep "ENUM '$l'" vmlinux; done < <(grep field:enum /sys/kernel/tracing/events/*/*/format | awk '{print $3}' | sort | uniq) | awk '{print $3}' | sed "s/'\(.*\)'/\1/g" dev_pm_qos_req_type error_detector hrtimer_mode i2c_slave_event ieee80211_bss_type lru_list migrate_mode nl80211_auth_type nl80211_band nl80211_iftype numa_vmaskip_reason pm_qos_req_action pwm_polarity skb_drop_reason thermal_trip_type xen_lazy_mode xen_mc_extend_args xen_mc_flush_reason zone_type And what tracepoints have these enum types as their arguments: vmlinux_dir $ while read l; do grep "ENUM '$l'" vmlinux; done < <(grep field:enum /sys/kernel/tracing/events/*/*/format | awk '{print $3}' | sort | uniq) | awk '{print $3}' | sed "s/'\(.*\)'/\1/g" > good_enums vmlinux_dir $ cat good_enums dev_pm_qos_req_type error_detector hrtimer_mode i2c_slave_event ieee80211_bss_type lru_list migrate_mode nl80211_auth_type nl80211_band nl80211_iftype numa_vmaskip_reason pm_qos_req_action pwm_polarity skb_drop_reason thermal_trip_type xen_lazy_mode xen_mc_extend_args xen_mc_flush_reason zone_type vmlinux_dir $ grep -f good_enums -l /sys/kernel/tracing/events/*/*/format /sys/kernel/tracing/events/cfg80211/cfg80211_chandef_dfs_required/format /sys/kernel/tracing/events/cfg80211/cfg80211_ch_switch_notify/format /sys/kernel/tracing/events/cfg80211/cfg80211_ch_switch_started_notify/format /sys/kernel/tracing/events/cfg80211/cfg80211_get_bss/format /sys/kernel/tracing/events/cfg80211/cfg80211_ibss_joined/format /sys/kernel/tracing/events/cfg80211/cfg80211_inform_bss_frame/format /sys/kernel/tracing/events/cfg80211/cfg80211_radar_event/format /sys/kernel/tracing/events/cfg80211/cfg80211_ready_on_channel_expired/format /sys/kernel/tracing/events/cfg80211/cfg80211_ready_on_channel/format /sys/kernel/tracing/events/cfg80211/cfg80211_reg_can_beacon/format /sys/kernel/tracing/events/cfg80211/cfg80211_return_bss/format /sys/kernel/tracing/events/cfg80211/cfg80211_tx_mgmt_expired/format /sys/kernel/tracing/events/cfg80211/rdev_add_virtual_intf/format /sys/kernel/tracing/events/cfg80211/rdev_auth/format /sys/kernel/tracing/events/cfg80211/rdev_change_virtual_intf/format /sys/kernel/tracing/events/cfg80211/rdev_channel_switch/format /sys/kernel/tracing/events/cfg80211/rdev_connect/format /sys/kernel/tracing/events/cfg80211/rdev_inform_bss/format /sys/kernel/tracing/events/cfg80211/rdev_libertas_set_mesh_channel/format /sys/kernel/tracing/events/cfg80211/rdev_mgmt_tx/format /sys/kernel/tracing/events/cfg80211/rdev_remain_on_channel/format /sys/kernel/tracing/events/cfg80211/rdev_return_chandef/format /sys/kernel/tracing/events/cfg80211/rdev_return_int_survey_info/format /sys/kernel/tracing/events/cfg80211/rdev_set_ap_chanwidth/format /sys/kernel/tracing/events/cfg80211/rdev_set_monitor_channel/format /sys/kernel/tracing/events/cfg80211/rdev_set_radar_background/format /sys/kernel/tracing/events/cfg80211/rdev_start_ap/format /sys/kernel/tracing/events/cfg80211/rdev_start_radar_detection/format /sys/kernel/tracing/events/cfg80211/rdev_tdls_channel_switch/format /sys/kernel/tracing/events/compaction/mm_compaction_defer_compaction/format /sys/kernel/tracing/events/compaction/mm_compaction_deferred/format /sys/kernel/tracing/events/compaction/mm_compaction_defer_reset/format /sys/kernel/tracing/events/compaction/mm_compaction_finished/format /sys/kernel/tracing/events/compaction/mm_compaction_kcompactd_wake/format /sys/kernel/tracing/events/compaction/mm_compaction_suitable/format /sys/kernel/tracing/events/compaction/mm_compaction_wakeup_kcompactd/format /sys/kernel/tracing/events/error_report/error_report_end/format /sys/kernel/tracing/events/i2c_slave/i2c_slave/format /sys/kernel/tracing/events/migrate/mm_migrate_pages/format /sys/kernel/tracing/events/migrate/mm_migrate_pages_start/format /sys/kernel/tracing/events/pagemap/mm_lru_insertion/format /sys/kernel/tracing/events/power/dev_pm_qos_add_request/format /sys/kernel/tracing/events/power/dev_pm_qos_remove_request/format /sys/kernel/tracing/events/power/dev_pm_qos_update_request/format /sys/kernel/tracing/events/power/pm_qos_update_flags/format /sys/kernel/tracing/events/power/pm_qos_update_target/format /sys/kernel/tracing/events/pwm/pwm_apply/format /sys/kernel/tracing/events/pwm/pwm_get/format /sys/kernel/tracing/events/sched/sched_skip_vma_numa/format /sys/kernel/tracing/events/skb/kfree_skb/format /sys/kernel/tracing/events/thermal/thermal_zone_trip/format /sys/kernel/tracing/events/timer/hrtimer_init/format /sys/kernel/tracing/events/timer/hrtimer_start/format /sys/kernel/tracing/events/xen/xen_mc_batch/format /sys/kernel/tracing/events/xen/xen_mc_extend_args/format /sys/kernel/tracing/events/xen/xen_mc_flush_reason/format /sys/kernel/tracing/events/xen/xen_mc_issue/format Committer testing: root@x1:~# perf trace -e timer:hrtimer_start --max-events=2 0.000 :0/0 timer:hrtimer_start(hrtimer: 0xffff8d4eff225050, function: 0xffffffff9e22ddd0, expires: 241152380000000, softexpires: 241152380000000, mode: HRTIMER_MODE_ABS) 0.028 :0/0 timer:hrtimer_start(hrtimer: 0xffff8d4eff225050, function: 0xffffffff9e22ddd0, expires: 241153654000000, softexpires: 241153654000000, mode: HRTIMER_MODE_ABS_PINNED_HARD) root@x1:~# Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Reviewed-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/20240615032743.112750-1-howardchu95@gmail.com Link: https://lore.kernel.org/r/20240624181345.124764-4-howardchu95@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-07-31perf trace: BTF-based enum pretty printing for syscall argsHoward Chu
In this patch, BTF is used to turn enum value to the corresponding name. There is only one system call that uses enum value as its argument, that is `landlock_add_rule()`. The vmlinux btf is loaded lazily, when user decided to trace the `landlock_add_rule` syscall. But if one decide to run `perf trace` without any arguments, the behaviour is to trace `landlock_add_rule`, so vmlinux btf will be loaded by default. The laziest behaviour is to load vmlinux btf when a `landlock_add_rule` syscall hits. But I think you could lose some samples when loading vmlinux btf at run time, for it can delay the handling of other samples. I might need your precious opinions on this... before: ``` perf $ ./perf trace -e landlock_add_rule 0.000 ( 0.008 ms): ldlck-test/438194 landlock_add_rule(rule_type: 2) = -1 EBADFD (File descriptor in bad state) 0.010 ( 0.001 ms): ldlck-test/438194 landlock_add_rule(rule_type: 1) = -1 EBADFD (File descriptor in bad state) ``` after: ``` perf $ ./perf trace -e landlock_add_rule 0.000 ( 0.029 ms): ldlck-test/438194 landlock_add_rule(rule_type: LANDLOCK_RULE_NET_PORT) = -1 EBADFD (File descriptor in bad state) 0.036 ( 0.004 ms): ldlck-test/438194 landlock_add_rule(rule_type: LANDLOCK_RULE_PATH_BENEATH) = -1 EBADFD (File descriptor in bad state) ``` Committer notes: Made it build with NO_LIBBPF=1, simplified btf_enum_fprintf(), see [1] for the discussion. Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Günther Noack <gnoack@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mickaël Salaün <mic@digikod.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/20240613022757.3589783-1-howardchu95@gmail.com Link: https://lore.kernel.org/lkml/ZnXAhFflUl_LV1QY@x1 # [1] Link: https://lore.kernel.org/r/20240624181345.124764-3-howardchu95@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-07-30Merge tag 'for-6.11-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix regression in extent map rework when handling insertion of overlapping compressed extent - fix unexpected file length when appending to a file using direct io and buffer not faulted in - in zoned mode, fix accounting of unusable space when flipping read-only block group back to read-write - fix page locking when COWing an inline range, assertion failure found by syzbot - fix calculation of space info in debugging print - tree-checker, add validation of data reference item - fix a few -Wmaybe-uninitialized build warnings * tag 'for-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: initialize location to fix -Wmaybe-uninitialized in btrfs_lookup_dentry() btrfs: fix corruption after buffer fault in during direct IO append write btrfs: zoned: fix zone_unusable accounting on making block group read-write again btrfs: do not subtract delalloc from avail bytes btrfs: make cow_file_range_inline() honor locked_page on error btrfs: fix corrupt read due to bad offset of a compressed extent map btrfs: tree-checker: validate dref root and objectid
2024-07-30Merge tag 'perf-tools-fixes-for-v6.11-2024-07-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "Some more build fixes and a random crash fix: - Fix cross-build by setting pkg-config env according to the arch - Fix static build for missing library dependencies - Fix Segfault when callchain has no symbols" * tag 'perf-tools-fixes-for-v6.11-2024-07-30' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf docs: Document cross compilation perf: build: Link lib 'zstd' for static build perf: build: Link lib 'lzma' for static build perf: build: Only link libebl.a for old libdw perf: build: Set Python configuration for cross compilation perf: build: Setup PKG_CONFIG_LIBDIR for cross compilation perf tool: fix dereferencing NULL al->maps
2024-07-30Merge tag 'chrome-platform-fixes-for-v6.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome-platform fix from Tzung-Bi Shih: "Fix a race condition that sends multiple host commands at a time" * tag 'chrome-platform-fixes-for-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_proto: Lock device when updating MKBP version
2024-07-30minmax: improve macro expansion and type checkingLinus Torvalds
This clarifies the rules for min()/max()/clamp() type checking and makes them a much more efficient macro expansion. In particular, we now look at the type and range of the inputs to see whether they work together, generating a mask of acceptable comparisons, and then just verifying that the inputs have a shared case: - an expression with a signed type can be used for (1) signed comparisons (2) unsigned comparisons if it is statically known to have a non-negative value - an expression with an unsigned type can be used for (3) unsigned comparison (4) signed comparisons if the type is smaller than 'int' and thus the C integer promotion rules will make it signed anyway Here rule (1) and (3) are obvious, and rule (2) is important in order to allow obvious trivial constants to be used together with unsigned values. Rule (4) is not necessarily a good idea, but matches what we used to do, and we have extant cases of this situation in the kernel. Notably with bcachefs having an expression like min(bch2_bucket_sectors_dirty(a), ca->mi.bucket_size) where bch2_bucket_sectors_dirty() returns an 's64', and 'ca->mi.bucket_size' is of type 'u16'. Technically that bcachefs comparison is clearly sensible on a C type level, because the 'u16' will go through the normal C integer promotion, and become 'int', and then we're comparing two signed values and everything looks sane. However, it's not entirely clear that a 'min(s64,u16)' operation makes a lot of conceptual sense, and it's possible that we will remove rule (4). After all, the _reason_ we have these complicated type checks is exactly that the C type promotion rules are not very intuitive. But at least for now the rule is in place for backwards compatibility. Also note that rule (2) existed before, but is hugely relaxed by this commit. It used to be true only for the simplest compile-time non-negative integer constants. The new macro model will allow cases where the compiler can trivially see that an expression is non-negative even if it isn't necessarily a constant. For example, the amdgpu driver does min_t(size_t, sizeof(fru_info->serial), pia[addr] & 0x3F)); because our old 'min()' macro would see that 'pia[addr] & 0x3F' is of type 'int' and clearly not a C constant expression, so doing a 'min()' with a 'size_t' is a signedness violation. Our new 'min()' macro still sees that 'pia[addr] & 0x3F' is of type 'int', but is smart enough to also see that it is clearly non-negative, and thus would allow that case without any complaints. Cc: Arnd Bergmann <arnd@kernel.org> Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-30btrfs: initialize location to fix -Wmaybe-uninitialized in btrfs_lookup_dentry()David Sterba
Some arch + compiler combinations report a potentially unused variable location in btrfs_lookup_dentry(). This is a false alert as the variable is passed by value and always valid or there's an error. The compilers cannot probably reason about that although btrfs_inode_by_name() is in the same file. > + /kisskb/src/fs/btrfs/inode.c: error: 'location.objectid' may be used +uninitialized in this function [-Werror=maybe-uninitialized]: => 5603:9 > + /kisskb/src/fs/btrfs/inode.c: error: 'location.type' may be used +uninitialized in this function [-Werror=maybe-uninitialized]: => 5674:5 m68k-gcc8/m68k-allmodconfig mips-gcc8/mips-allmodconfig powerpc-gcc5/powerpc-all{mod,yes}config powerpc-gcc5/ppc64_defconfig Initialize it to zero, this should fix the warnings and won't change the behaviour as btrfs_inode_by_name() accepts only a root or inode item types, otherwise returns an error. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/linux-btrfs/bd4e9928-17b3-9257-8ba7-6b7f9bbb639a@linux-m68k.org/ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-07-30platform/chrome: cros_ec_proto: Lock device when updating MKBP versionPatryk Duda
The cros_ec_get_host_command_version_mask() function requires that the caller must have ec_dev->lock mutex before calling it. This requirement was not met and as a result it was possible that two commands were sent to the device at the same time. The problem was observed while using UART backend which doesn't use any additional locks, unlike SPI backend which locks the controller until response is received. Fixes: f74c7557ed0d ("platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure") Cc: stable@vger.kernel.org Signed-off-by: Patryk Duda <patrykd@google.com> Link: https://lore.kernel.org/r/20240730104425.607083-1-patrykd@google.com Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
2024-07-29profiling: remove stale percpu flip buffer variablesLinus Torvalds
For some reason I didn't see this issue on my arm64 or x86-64 builds, but Stephen Rothwell reports that commit 2accfdb7eff6 ("profiling: attempt to remove per-cpu profile flip buffer") left these static variables around, and the powerpc build is unhappy about them: kernel/profile.c:52:28: warning: 'cpu_profile_flip' defined but not used [-Wunused-variable] 52 | static DEFINE_PER_CPU(int, cpu_profile_flip); | ^~~~~~~~~~~~~~~~ .. So remove these stale left-over remnants too. Fixes: 2accfdb7eff6 ("profiling: attempt to remove per-cpu profile flip buffer") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-29Merge tag 'for-linus-2024072901' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - fixes for HID-BPF after the merge with the bpf tree (Arnd Bergmann and Benjamin Tissoires) - some tool type fix for the Wacom driver (Tatsunosuke Tobita) - a reorder of the sensor discovery to ensure the HID AMD SFH is removed when no sensors are available (Basavaraj Natikar) * tag 'for-linus-2024072901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: selftests/hid: add test for attaching multiple time the same struct_ops HID: bpf: prevent the same struct_ops to be attached more than once selftests/hid: disable struct_ops auto-attach selftests/hid: fix bpf_wq new API HID: amd_sfh: Move sensor discovery before HID device initialization hid: bpf: add BPF_JIT dependency HID: wacom: more appropriate tool type categorization HID: wacom: Modify pen IDs
2024-07-29Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "The biggest thing here is the adminq change - but it looks like the only way to avoid headq blocking causing indefinite stalls. This fixes three issues: - Prevent admin commands on one VF blocking another. This prevents a bad VF from blocking a good one, as well as fixing a scalability issue with large # of VFs - Correctly return error on command failure on octeon. We used to treat failed commands as a success. - Fix modpost warning when building virtio_dma_buf. Harmless, but the fix is trivial" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci_modern: remove admin queue serialization lock virtio_pci_modern: use completion instead of busy loop to wait on admin cmd result virtio_pci_modern: pass cmd as an identification token virtio_pci_modern: create admin queue of queried size virtio: create admin queues alongside other virtqueues virtio_pci: pass vq info as an argument to vp_setup_vq() virtio: push out code to vp_avq_index() virtio_pci_modern: treat vp_dev->admin_vq.info.vq pointer as static virtio_pci: introduce vector allocation fallback for slow path virtqueues virtio_pci: pass vector policy enum to vp_find_one_vq_msix() virtio_pci: pass vector policy enum to vp_find_vqs_msix() virtio_pci: simplify vp_request_msix_vectors() call a bit virtio_pci: push out single vq find code to vp_find_one_vq_msix() vdpa/octeon_ep: Fix error code in octep_process_mbox() virtio: add missing MODULE_DESCRIPTION() macro
2024-07-29task_work: make TWA_NMI_CURRENT handling conditional on IRQ_WORKLinus Torvalds
The TWA_NMI_CURRENT handling very much depends on IRQ_WORK, but that isn't universally enabled everywhere. Maybe the IRQ_WORK infrastructure should just be unconditional - x86 ends up indirectly enabling it through unconditionally enabling PERF_EVENTS, for example. But it also gets enabled by having SMP support, or even if you just have PRINTK enabled. But in the meantime TWA_NMI_CURRENT causes tons of build failures on various odd minimal configs. Which did show up in linux-next, but despite that nobody bothered to fix it or even inform me until -rc1 was out. Fixes: 466e4d801cd4 ("task_work: Add TWA_NMI_CURRENT as an additional notify mode") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernelci.org bot <bot@kernelci.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-29profiling: attempt to remove per-cpu profile flip bufferLinus Torvalds
This is the really old legacy kernel profiling code, which has long since been obviated by "real profiling" (ie 'prof' and company), and mainly remains as a source of syzbot reports. There are anecdotal reports that people still use it for boot-time profiling, but it's unlikely that such use would care about the old NUMA optimizations in this code from 2004 (commit ad02973d42: "profile: 512x Altix timer interrupt livelock fix" in the BK import archive at [1]) So in order to head off future syzbot reports, let's try to simplify this code and get rid of the per-cpu profile buffers that are quite a large portion of the complexity footprint of this thing (including CPU hotplug callbacks etc). It's unlikely anybody will actually notice, or possibly, as Thomas put it: "Only people who indulge in nostalgia will notice :)". That said, if it turns out that this code is actually actively used by somebody, we can always revert this removal. Thus the "attempt" in the summary line. [ Note: in a small nod to "the profiling code can cause NUMA problems", this also removes the "increment the last entry in the profiling array on any unknown hits" logic. That would account any program counter in a module to that single counter location, and might exacerbate any NUMA cacheline bouncing issues ] Link: https://lore.kernel.org/all/CAHk-=wgs52BxT4Zjmjz8aNvHWKxf5_ThBY4bYL1Y6CTaNL2dTw@mail.gmail.com/ Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1] Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-29profiling: remove prof_cpu_maskTetsuo Handa
syzbot is reporting uninit-value at profile_hits(), for there is a race window between if (!alloc_cpumask_var(&prof_cpu_mask, GFP_KERNEL)) return -ENOMEM; cpumask_copy(prof_cpu_mask, cpu_possible_mask); in profile_init() and cpumask_available(prof_cpu_mask) && cpumask_test_cpu(smp_processor_id(), prof_cpu_mask)) in profile_tick(); prof_cpu_mask remains uninitialzed until cpumask_copy() completes while cpumask_available(prof_cpu_mask) returns true as soon as alloc_cpumask_var(&prof_cpu_mask) completes. We could replace alloc_cpumask_var() with zalloc_cpumask_var() and call cpumask_copy() from create_proc_profile() on only UP kernels, for profile_online_cpu() calls cpumask_set_cpu() as needed via cpuhp_setup_state(CPUHP_AP_ONLINE_DYN) on SMP kernels. But this patch removes prof_cpu_mask because it seems unnecessary. The cpumask_test_cpu(smp_processor_id(), prof_cpu_mask) test in profile_tick() is likely always true due to a CPU cannot call profile_tick() if that CPU is offline and cpumask_set_cpu(cpu, prof_cpu_mask) is called when that CPU becomes online and cpumask_clear_cpu(cpu, prof_cpu_mask) is called when that CPU becomes offline . This test could be false during transition between online and offline. But according to include/linux/cpuhotplug.h , CPUHP_PROFILE_PREPARE belongs to PREPARE section, which means that the CPU subjected to profile_dead_cpu() cannot be inside profile_tick() (i.e. no risk of use-after-free bug) because interrupt for that CPU is disabled during PREPARE section. Therefore, this test is guaranteed to be true, and can be removed. (Since profile_hits() checks prof_buffer != NULL, we don't need to check prof_buffer != NULL here unless get_irq_regs() or user_mode() is such slow that we want to avoid when prof_buffer == NULL). do_profile_hits() is called from profile_tick() from timer interrupt only if cpumask_test_cpu(smp_processor_id(), prof_cpu_mask) is true and prof_buffer is not NULL. But syzbot is also reporting that sometimes do_profile_hits() is called while current thread is still doing vzalloc(), where prof_buffer must be NULL at this moment. This indicates that multiple threads concurrently tried to write to /sys/kernel/profiling interface, which caused that somebody else try to re-allocate prof_buffer despite somebody has already allocated prof_buffer. Fix this by using serialization. Reported-by: syzbot <syzbot+b1a83ab2a9eb9321fbdd@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=b1a83ab2a9eb9321fbdd Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+b1a83ab2a9eb9321fbdd@syzkaller.appspotmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-29Input: MT - limit max slotsTetsuo Handa
syzbot is reporting too large allocation at input_mt_init_slots(), for num_slots is supplied from userspace using ioctl(UI_DEV_CREATE). Since nobody knows possible max slots, this patch chose 1024. Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5 Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linuxLinus Torvalds
Pull ARM updates from Russell King: - ftrace: don't assume stack frames are contiguous in memory - remove unused mod_inwind_map structure - spelling fixes - allow use of LD dead code/data elimination - fix callchain_trace() return value - add support for stackleak gcc plugin - correct some reset asm function prototypes for CFI [ Missed the merge window because Russell forgot to push out ] * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: ARM: 9408/1: mm: CFI: Fix some erroneous reset prototypes ARM: 9407/1: Add support for STACKLEAK gcc plugin ARM: 9406/1: Fix callchain_trace() return value ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION ARM: 9403/1: Alpine: Spelling s/initialiing/initializing/ ARM: 9402/1: Kconfig: Spelling s/Cortex A-/Cortex-A/ ARM: 9400/1: Remove unused struct 'mod_unwind_map'
2024-07-29btrfs: fix corruption after buffer fault in during direct IO append writeFilipe Manana
During an append (O_APPEND write flag) direct IO write if the input buffer was not previously faulted in, we can corrupt the file in a way that the final size is unexpected and it includes an unexpected hole. The problem happens like this: 1) We have an empty file, with size 0, for example; 2) We do an O_APPEND direct IO with a length of 4096 bytes and the input buffer is not currently faulted in; 3) We enter btrfs_direct_write(), lock the inode and call generic_write_checks(), which calls generic_write_checks_count(), and that function sets the iocb position to 0 with the following code: if (iocb->ki_flags & IOCB_APPEND) iocb->ki_pos = i_size_read(inode); 4) We call btrfs_dio_write() and enter into iomap, which will end up calling btrfs_dio_iomap_begin() and that calls btrfs_get_blocks_direct_write(), where we update the i_size of the inode to 4096 bytes; 5) After btrfs_dio_iomap_begin() returns, iomap will attempt to access the page of the write input buffer (at iomap_dio_bio_iter(), with a call to bio_iov_iter_get_pages()) and fail with -EFAULT, which gets returned to btrfs at btrfs_direct_write() via btrfs_dio_write(); 6) At btrfs_direct_write() we get the -EFAULT error, unlock the inode, fault in the write buffer and then goto to the label 'relock'; 7) We lock again the inode, do all the necessary checks again and call again generic_write_checks(), which calls generic_write_checks_count() again, and there we set the iocb's position to 4K, which is the current i_size of the inode, with the following code pointed above: if (iocb->ki_flags & IOCB_APPEND) iocb->ki_pos = i_size_read(inode); 8) Then we go again to btrfs_dio_write() and enter iomap and the write succeeds, but it wrote to the file range [4K, 8K), leaving a hole in the [0, 4K) range and an i_size of 8K, which goes against the expectations of having the data written to the range [0, 4K) and get an i_size of 4K. Fix this by not unlocking the inode before faulting in the input buffer, in case we get -EFAULT or an incomplete write, and not jumping to the 'relock' label after faulting in the buffer - instead jump to a location immediately before calling iomap, skipping all the write checks and relocking. This solves this problem and it's fine even in case the input buffer is memory mapped to the same file range, since only holding the range locked in the inode's io tree can cause a deadlock, it's safe to keep the inode lock (VFS lock), as was fixed and described in commit 51bd9563b678 ("btrfs: fix deadlock due to page faults during direct IO reads and writes"). A sample reproducer provided by a reporter is the following: $ cat test.c #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <fcntl.h> #include <stdio.h> #include <sys/mman.h> #include <sys/stat.h> #include <unistd.h> int main(int argc, char *argv[]) { if (argc < 2) { fprintf(stderr, "Usage: %s <test file>\n", argv[0]); return 1; } int fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT | O_APPEND, 0644); if (fd < 0) { perror("creating test file"); return 1; } char *buf = mmap(NULL, 4096, PROT_READ, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); ssize_t ret = write(fd, buf, 4096); if (ret < 0) { perror("pwritev2"); return 1; } struct stat stbuf; ret = fstat(fd, &stbuf); if (ret < 0) { perror("stat"); return 1; } printf("size: %llu\n", (unsigned long long)stbuf.st_size); return stbuf.st_size == 4096 ? 0 : 1; } A test case for fstests will be sent soon. Reported-by: Hanna Czenczek <hreitz@redhat.com> Link: https://lore.kernel.org/linux-btrfs/0b841d46-12fe-4e64-9abb-871d8d0de271@redhat.com/ Fixes: 8184620ae212 ("btrfs: fix lost file sync on direct IO write with nowait and dsync iocb") CC: stable@vger.kernel.org # 6.1+ Tested-by: Hanna Czenczek <hreitz@redhat.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-07-29btrfs: zoned: fix zone_unusable accounting on making block group read-write ↵Naohiro Aota
again When btrfs makes a block group read-only, it adds all free regions in the block group to space_info->bytes_readonly. That free space excludes reserved and pinned regions. OTOH, when btrfs makes the block group read-write again, it moves all the unused regions into the block group's zone_unusable. That unused region includes reserved and pinned regions. As a result, it counts too much zone_unusable bytes. Fortunately (or unfortunately), having erroneous zone_unusable does not affect the calculation of space_info->bytes_readonly, because free space (num_bytes in btrfs_dec_block_group_ro) calculation is done based on the erroneous zone_unusable and it reduces the num_bytes just to cancel the error. This behavior can be easily discovered by adding a WARN_ON to check e.g, "bg->pinned > 0" in btrfs_dec_block_group_ro(), and running fstests test case like btrfs/282. Fix it by properly considering pinned and reserved in btrfs_dec_block_group_ro(). Also, add a WARN_ON and introduce btrfs_space_info_update_bytes_zone_unusable() to catch a similar mistake. Fixes: 169e0da91a21 ("btrfs: zoned: track unusable bytes for zones") CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-07-29btrfs: do not subtract delalloc from avail bytesNaohiro Aota
The block group's avail bytes printed when dumping a space info subtract the delalloc_bytes. However, as shown in btrfs_add_reserved_bytes() and btrfs_free_reserved_bytes(), it is added or subtracted along with "reserved" for the delalloc case, which means the "delalloc_bytes" is a part of the "reserved" bytes. So, excluding it to calculate the avail space counts delalloc_bytes twice, which can lead to an invalid result. Fixes: e50b122b832b ("btrfs: print available space for a block group when dumping a space info") CC: stable@vger.kernel.org # 6.6+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2024-07-29btrfs: make cow_file_range_inline() honor locked_page on errorBoris Burkov
The btrfs buffered write path runs through __extent_writepage() which has some tricky return value handling for writepage_delalloc(). Specifically, when that returns 1, we exit, but for other return values we continue and end up calling btrfs_folio_end_all_writers(). If the folio has been unlocked (note that we check the PageLocked bit at the start of __extent_writepage()), this results in an assert panic like this one from syzbot: BTRFS: error (device loop0 state EAL) in free_log_tree:3267: errno=-5 IO failure BTRFS warning (device loop0 state EAL): Skipping commit of aborted transaction. BTRFS: error (device loop0 state EAL) in cleanup_transaction:2018: errno=-5 IO failure assertion failed: folio_test_locked(folio), in fs/btrfs/subpage.c:871 ------------[ cut here ]------------ kernel BUG at fs/btrfs/subpage.c:871! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 5090 Comm: syz-executor225 Not tainted 6.10.0-syzkaller-05505-gb1bc554e009e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:btrfs_folio_end_all_writers+0x55b/0x610 fs/btrfs/subpage.c:871 Code: e9 d3 fb ff ff e8 25 22 c2 fd 48 c7 c7 c0 3c 0e 8c 48 c7 c6 80 3d 0e 8c 48 c7 c2 60 3c 0e 8c b9 67 03 00 00 e8 66 47 ad 07 90 <0f> 0b e8 6e 45 b0 07 4c 89 ff be 08 00 00 00 e8 21 12 25 fe 4c 89 RSP: 0018:ffffc900033d72e0 EFLAGS: 00010246 RAX: 0000000000000045 RBX: 00fff0000000402c RCX: 663b7a08c50a0a00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc900033d73b0 R08: ffffffff8176b98c R09: 1ffff9200067adfc R10: dffffc0000000000 R11: fffff5200067adfd R12: 0000000000000001 R13: dffffc0000000000 R14: 0000000000000000 R15: ffffea0001cbee80 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5f076012f8 CR3: 000000000e134000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __extent_writepage fs/btrfs/extent_io.c:1597 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2251 [inline] btrfs_writepages+0x14d7/0x2760 fs/btrfs/extent_io.c:2373 do_writepages+0x359/0x870 mm/page-writeback.c:2656 filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397 __filemap_fdatawrite_range mm/filemap.c:430 [inline] __filemap_fdatawrite mm/filemap.c:436 [inline] filemap_flush+0xdf/0x130 mm/filemap.c:463 btrfs_release_file+0x117/0x130 fs/btrfs/file.c:1547 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:222 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:877 do_group_exit+0x207/0x2c0 kernel/exit.c:1026 __do_sys_exit_group kernel/exit.c:1037 [inline] __se_sys_exit_group kernel/exit.c:1035 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1035 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5f075b70c9 Code: Unable to access opcode bytes at 0x7f5f075b709f. I was hitting the same issue by doing hundreds of accelerated runs of generic/475, which also hits IO errors by design. I instrumented that reproducer with bpftrace and found that the undesirable folio_unlock was coming from the following callstack: folio_unlock+5 __process_pages_contig+475 cow_file_range_inline.constprop.0+230 cow_file_range+803 btrfs_run_delalloc_range+566 writepage_delalloc+332 __extent_writepage # inlined in my stacktrace, but I added it here extent_write_cache_pages+622 Looking at the bisected-to patch in the syzbot report, Josef realized that the logic of the cow_file_range_inline error path subtly changing. In the past, on error, it jumped to out_unlock in cow_file_range(), which honors the locked_page, so when we ultimately call folio_end_all_writers(), the folio of interest is still locked. After the change, we always unlocked ignoring the locked_page, on both success and error. On the success path, this all results in returning 1 to __extent_writepage(), which skips the folio_end_all_writers() call, which makes it OK to have unlocked. Fix the bug by wiring the locked_page into cow_file_range_inline() and only setting locked_page to NULL on success. Reported-by: syzbot+a14d8ac9af3a2a4fd0c8@syzkaller.appspotmail.com Fixes: 0586d0a89e77 ("btrfs: move extent bit and page cleanup into cow_file_range_inline") CC: stable@vger.kernel.org # 6.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2024-07-28minmax: simplify min()/max()/clamp() implementationLinus Torvalds
Now that we no longer have any C constant expression contexts (ie array size declarations or static initializers) that use min() or max(), we can simpify the implementation by not having to worry about the result staying as a C constant expression. So now we can unconditionally just use temporary variables of the right type, and get rid of the excessive expansion that used to come from the use of __builtin_choose_expr(__is_constexpr(...), .. to pick the specialized code for constant expressions. Another expansion simplification is to pass the temporary variables (in addition to the original expression) to our __types_ok() macro. That may superficially look like it complicates the macro, but when we only want the type of the expression, expanding the temporary variable names is much simpler and smaller than expanding the potentially complicated original expression. As a result, on my machine, doing a $ time make drivers/staging/media/atomisp/pci/isp/kernels/ynr/ynr_1.0/ia_css_ynr.host.i goes from real 0m16.621s user 0m15.360s sys 0m1.221s to real 0m2.532s user 0m2.091s sys 0m0.452s because the token expansion goes down dramatically. In particular, the longest line expansion (which was line 71 of that 'ia_css_ynr.host.c' file) shrinks from 23,338kB (yes, 23MB for one single line) to "just" 1,444kB (now "only" 1.4MB). And yes, that line is still the line from hell, because it's doing multiple levels of "min()/max()" expansion thanks to some of them being hidden inside the uDIGIT_FITTING() macro. Lorenzo has a nice cleanup patch that makes that driver use inline functions instead of macros for sDIGIT_FITTING() and uDIGIT_FITTING(), which will fix that line once and for all, but the 16-fold reduction in this case does show why we need to simplify these helpers. Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-28minmax: don't use max() in situations that want a C constant expressionLinus Torvalds
We only had a couple of array[] declarations, and changing them to just use 'MAX()' instead of 'max()' fixes the issue. This will allow us to simplify our min/max macros enormously, since they can now unconditionally use temporary variables to avoid using the argument values multiple times. Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-28minmax: scsi: fix mis-use of 'clamp()' in sr.cLinus Torvalds
While working on simplifying the minmax functions, and avoiding excessive macro expansion, it turns out that the sr.c use of the 'clamp()' macro has the arguments the wrong way around. The clamp logic is val = clamp(in, low, high); and it returns the input clamped to the low/high limits. But sr.c ddid speed = clamp(0, speed, 0xffff / 177); which clamps the value '0' to the range '[speed, 0xffff / 177]' and ends up being nonsensical. Happily, I don't think anybody ever cared. Fixes: 9fad9d560af5 ("scsi: sr: Fix unintentional arithmetic wraparound") Cc: Justin Stitt <justinstitt@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-28minmax: make generic MIN() and MAX() macros available everywhereLinus Torvalds
This just standardizes the use of MIN() and MAX() macros, with the very traditional semantics. The goal is to use these for C constant expressions and for top-level / static initializers, and so be able to simplify the min()/max() macros. These macro names were used by various kernel code - they are very traditional, after all - and all such users have been fixed up, with a few different approaches: - trivial duplicated macro definitions have been removed Note that 'trivial' here means that it's obviously kernel code that already included all the major kernel headers, and thus gets the new generic MIN/MAX macros automatically. - non-trivial duplicated macro definitions are guarded with #ifndef This is the "yes, they define their own versions, but no, the include situation is not entirely obvious, and maybe they don't get the generic version automatically" case. - strange use case #1 A couple of drivers decided that the way they want to describe their versioning is with #define MAJ 1 #define MIN 2 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) which adds zero value and I just did my Alexander the Great impersonation, and rewrote that pointless Gordian knot as #define DRV_VERSION "1.2" instead. - strange use case #2 A couple of drivers thought that it's a good idea to have a random 'MIN' or 'MAX' define for a value or index into a table, rather than the traditional macro that takes arguments. These values were re-written as C enum's instead. The new function-line macros only expand when followed by an open parenthesis, and thus don't clash with enum use. Happily, there weren't really all that many of these cases, and a lot of users already had the pattern of using '#ifndef' guarding (or in one case just using '#undef MIN') before defining their own private version that does the same thing. I left such cases alone. Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-28Linux 6.11-rc1v6.11-rc1Linus Torvalds
2024-07-28Merge tag 'kbuild-fixes-v6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix RPM package build error caused by an incorrect locale setup - Mark modules.weakdep as ghost in RPM package - Fix the odd combination of -S and -c in stack protector scripts, which is an error with the latest Clang * tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Fix '-S -c' in x86 stack protector scripts kbuild: rpm-pkg: ghost modules.weakdep file kbuild: rpm-pkg: Fix C locale setup
2024-07-28minmax: simplify and clarify min_t()/max_t() implementationLinus Torvalds
This simplifies the min_t() and max_t() macros by no longer making them work in the context of a C constant expression. That means that you can no longer use them for static initializers or for array sizes in type definitions, but there were only a couple of such uses, and all of them were converted (famous last words) to use MIN_T/MAX_T instead. Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-28minmax: add a few more MIN_T/MAX_T usersLinus Torvalds
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant expressions in VM code") added the simpler MIN_T/MAX_T macros in order to avoid some excessive expansion from the rather complicated regular min/max macros. The complexity of those macros stems from two issues: (a) trying to use them in situations that require a C constant expression (in static initializers and for array sizes) (b) the type sanity checking and MIN_T/MAX_T avoids both of these issues. Now, in the whole (long) discussion about all this, it was pointed out that the whole type sanity checking is entirely unnecessary for min_t/max_t which get a fixed type that the comparison is done in. But that still leaves min_t/max_t unnecessarily complicated due to worries about the C constant expression case. However, it turns out that there really aren't very many cases that use min_t/max_t for this, and we can just force-convert those. This does exactly that. Which in turn will then allow for much simpler implementations of min_t()/max_t(). All the usual "macros in all upper case will evaluate the arguments multiple times" rules apply. We should do all the same things for the regular min/max() vs MIN/MAX() cases, but that has the added complexity of various drivers defining their own local versions of MIN/MAX, so that needs another level of fixes first. Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/ Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-28Merge tag 'ubifs-for-linus-6.11-rc1-take2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: - Many fixes for power-cut issues by Zhihao Cheng - Another ubiblock error path fix - ubiblock section mismatch fix - Misc fixes all over the place * tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Fix ubi_init() ubiblock_exit() section mismatch ubifs: add check for crypto_shash_tfm_digest ubifs: Fix inconsistent inode size when powercut happens during appendant writing ubi: block: fix null-pointer-dereference in ubiblock_create() ubifs: fix kernel-doc warnings ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity mtd: ubi: Restore missing cleanup on ubi_init() failure path ubifs: dbg_orphan_check: Fix missed key type checking ubifs: Fix unattached inode when powercut happens in creating ubifs: Fix space leak when powercut happens in linking tmpfile ubifs: Move ui->data initialization after initializing security ubifs: Fix adding orphan entry twice for the same inode ubifs: Remove insert_dead_orphan from replaying orphan process Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path" ubifs: Don't add xattr inode into orphan area ubifs: Fix unattached xattr inode if powercut happens after deleting mtd: ubi: avoid expensive do_div() on 32-bit machines mtd: ubi: make ubi_class constant ubi: eba: properly rollback inside self_check_eba
2024-07-29kbuild: Fix '-S -c' in x86 stack protector scriptsNathan Chancellor
After a recent change in clang to stop consuming all instances of '-S' and '-c' [1], the stack protector scripts break due to the kernel's use of -Werror=unused-command-line-argument to catch cases where flags are not being properly consumed by the compiler driver: $ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument] This results in CONFIG_STACKPROTECTOR getting disabled because CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set. '-c' and '-S' both instruct the compiler to stop at different stages of the pipeline ('-S' after compiling, '-c' after assembling), so having them present together in the same command makes little sense. In this case, the test wants to stop before assembling because it is looking at the textual assembly output of the compiler for either '%fs' or '%gs', so remove '-c' from the list of arguments to resolve the error. All versions of GCC continue to work after this change, along with versions of clang that do or do not contain the change mentioned above. Cc: stable@vger.kernel.org Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS") Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector") Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-07-28ubi: Fix ubi_init() ubiblock_exit() section mismatchRichard Weinberger
Since ubiblock_exit() is now called from an init function, the __exit section no longer makes sense. Cc: Ben Hutchings <bwh@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407131403.wZJpd8n2-lkp@intel.com/ Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
2024-07-28Merge tag 'v6.11-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - Enable turbostat extensions to add both perf and PMT (Intel Platform Monitoring Technology) counters via the cmdline - Demonstrate PMT access with built-in support for Meteor Lake's Die C6 counter * tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 2024.07.26 tools/power turbostat: Include umask=%x in perf counter's config tools/power turbostat: Document PMT in turbostat.8 tools/power turbostat: Add MTL's PMT DC6 builtin counter tools/power turbostat: Add early support for PMT counters tools/power turbostat: Add selftests for added perf counters tools/power turbostat: Add selftests for SMI, APERF and MPERF counters tools/power turbostat: Move verbose counter messages to level 2 tools/power turbostat: Move debug prints from stdout to stderr tools/power turbostat: Fix typo in turbostat.8 tools/power turbostat: Add perf added counter example to turbostat.8 tools/power turbostat: Fix formatting in turbostat.8 tools/power turbostat: Extend --add option with perf counters tools/power turbostat: Group SMI counter with APERF and MPERF tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source tools/power turbostat: Remove anonymous union from rapl_counter_info_t tools/power/turbostat: Switch to new Intel CPU model defines
2024-07-28Merge tag 'cxl-for-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull CXL updates from Dave Jiang: "Core: - A CXL maturity map has been added to the documentation to detail the current state of CXL enabling. It provides the status of the current state of various CXL features to inform current and future contributors of where things are and which areas need contribution. - A notifier handler has been added in order for a newly created CXL memory region to trigger the abstract distance metrics calculation. This should bring parity for CXL memory to the same level vs hotplugged DRAM for NUMA abstract distance calculation. The abstract distance reflects relative performance used for memory tiering handling. - An addition for XOR math has been added to address the CXL DPA to SPA translation. CXL address translation did not support address interleave math with XOR prior to this change. Fixes: - Fix to address race condition in the CXL memory hotplug notifier - Add missing MODULE_DESCRIPTION() for CXL modules - Fix incorrect vendor debug UUID define Misc: - A warning has been added to inform users of an unsupported configuration when mixing CXL VH and RCH/RCD hierarchies - The ENXIO error code has been replaced with EBUSY for inject poison limit reached via debugfs and cxl-test support - Moving the PCI config read in cxl_dvsec_rr_decode() to avoid unnecessary PCI config reads - A refactor to a common struct for DRAM and general media CXL events" * tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/core/pci: Move reading of control register to immediately before usage cxl: Remove defunct code calculating host bridge target positions cxl/region: Verify target positions using the ordered target list cxl: Restore XOR'd position bits during address translation cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa() cxl/test: Replace ENXIO with EBUSY for inject poison limit reached cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy cxl/core: Fix incorrect vendor debug UUID define Documentation: CXL Maturity Map cxl/region: Simplify cxl_region_nid() cxl/region: Support to calculate memory tier abstract distance cxl/region: Fix a race condition in memory hotplug notifier cxl: add missing MODULE_DESCRIPTION() macros cxl/events: Use a common struct for DRAM and General Media events
2024-07-28Merge tag 'unicode-next-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode Pull unicode update from Gabriel Krisman Bertazi: "Two small fixes to silence the compiler and static analyzers tools from Ben Dooks and Jeff Johnson" * tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode: unicode: add MODULE_DESCRIPTION() macros unicode: make utf8 test count static
2024-07-28kbuild: rpm-pkg: ghost modules.weakdep fileJose Ignacio Tornos Martinez
In the same way as for other similar files, mark as ghost the new file generated by depmod for configured weak dependencies for modules, modules.weakdep, so that although it is not included in the package, claim the ownership on it. Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-07-27Merge tag '6.11-rc-smb-client-fixes-part2' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull more smb client updates from Steve French: - fix for potential null pointer use in init cifs - additional dynamic trace points to improve debugging of some common scenarios - two SMB1 fixes (one addressing reconnect with POSIX extensions, one a mount parsing error) * tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: add dynamic trace point for session setup key expired failures smb3: add four dynamic tracepoints for copy_file_range and reflink smb3: add dynamic tracepoint for reflink errors cifs: mount with "unix" mount option for SMB1 incorrectly handled cifs: fix reconnect with SMB1 UNIX Extensions cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path
2024-07-27Merge tag 'block-6.11-20240726' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - Fix request without payloads cleanup (Leon) - Use new protection information format (Francis) - Improved debug message for lost pci link (Bart) - Another apst quirk (Wang) - Use appropriate sysfs api for printing chars (Markus) - ublk async device deletion fix (Ming) - drbd kerneldoc fixups (Simon) - Fix deadlock between sd removal and release (Yang) * tag 'block-6.11-20240726' of git://git.kernel.dk/linux: nvme-pci: add missing condition check for existence of mapped data ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling block: fix deadlock between sd_remove & sd_release drbd: Add peer_device to Kernel doc nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE nvme-pci: Fix the instructions for disabling power management nvme: remove redundant bdev local variable nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens() nvme/pci: Add APST quirk for Lenovo N60z laptop
2024-07-27Merge tag 'io_uring-6.11-20240726' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: - Fix a syzbot issue for the msg ring cache added in this release. No ill effects from this one, but it did make KMSAN unhappy (me) - Sanitize the NAPI timeout handling, by unifying the value handling into all ktime_t rather than converting back and forth (Pavel) - Fail NAPI registration for IOPOLL rings, it's not supported (Pavel) - Fix a theoretical issue with ring polling and cancelations (Pavel) - Various little cleanups and fixes (Pavel) * tag 'io_uring-6.11-20240726' of git://git.kernel.dk/linux: io_uring/napi: pass ktime to io_napi_adjust_timeout io_uring/napi: use ktime in busy polling io_uring/msg_ring: fix uninitialized use of target_req->flags io_uring: align iowq and task request error handling io_uring: kill REQ_F_CANCEL_SEQ io_uring: simplify io_uring_cmd return io_uring: fix io_match_task must_hold io_uring: don't allow netpolling with SETUP_IOPOLL io_uring: tighten task exit cancellations
2024-07-27Merge tag 'vfs-6.11-rc1.fixes.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: "This contains two fixes for this merge window: VFS: - I noticed that it is possible for a privileged user to mount most filesystems with a non-initial user namespace in sb->s_user_ns. When fsopen() is called in a non-init namespace the caller's namespace is recorded in fs_context->user_ns. If the returned file descriptor is then passed to a process privileged in init_user_ns, that process can call fsconfig(fd_fs, FSCONFIG_CMD_CREATE*), creating a new superblock with sb->s_user_ns set to the namespace of the process which called fsopen(). This is problematic as only filesystems that raise FS_USERNS_MOUNT are known to be able to support a non-initial s_user_ns. Others may suffer security issues, on-disk corruption or outright crash the kernel. Prevent that by restricting such delegation to filesystems that allow FS_USERNS_MOUNT. Note, that this delegation requires a privileged process to actually create the superblock so either the privileged process is cooperaing or someone must have tricked a privileged process into operating on a fscontext file descriptor whose origin it doesn't know (a stupid idea). The bug dates back to about 5 years afaict. Misc: - Fix hostfs parsing when the mount request comes in via the legacy mount api. In the legacy mount api hostfs allows to specify the host directory mount without any key. Restore that behavior" * tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: hostfs: fix the host directory parse when mounting. fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT
2024-07-27Merge tag 'rust-6.11' of https://github.com/Rust-for-Linux/linuxLinus Torvalds
Pull Rust updates from Miguel Ojeda: "The highlight is the establishment of a minimum version for the Rust toolchain, including 'rustc' (and bundled tools) and 'bindgen'. The initial minimum will be the pinned version we currently have, i.e. we are just widening the allowed versions. That covers three stable Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow), plus beta, plus nightly. This should already be enough for kernel developers in distributions that provide recent Rust compiler versions routinely, such as Arch Linux, Debian Unstable (outside the freeze period), Fedora Linux, Gentoo Linux (especially the testing channel), Nix (unstable) and openSUSE Slowroll and Tumbleweed. In addition, the kernel is now being built-tested by Rust's pre-merge CI. That is, every change that is attempting to land into the Rust compiler is tested against the kernel, and it is merged only if it passes. Similarly, the bindgen tool has agreed to build the kernel in their CI too. Thus, with the pre-merge CI in place, both projects hope to avoid unintentional changes to Rust that break the kernel. This means that, in general, apart from intentional changes on their side (that we will need to workaround conditionally on our side), the upcoming Rust compiler versions should generally work. In addition, the Rust project has proposed getting the kernel into stable Rust (at least solving the main blockers) as one of its three flagship goals for 2024H2 [1]. I would like to thank Niko, Sid, Emilio et al. for their help promoting the collaboration between Rust and the kernel. Toolchain and infrastructure: - Support several Rust toolchain versions. - Support several bindgen versions. - Remove 'cargo' requirement and simplify 'rusttest', thanks to 'alloc' having been dropped last cycle. - Provide proper error reporting for the 'rust-analyzer' target. 'kernel' crate: - Add 'uaccess' module with a safe userspace pointers abstraction. - Add 'page' module with a 'struct page' abstraction. - Support more complex generics in workqueue's 'impl_has_work!' macro. 'macros' crate: - Add 'firmware' field support to the 'module!' macro. - Improve 'module!' macro documentation. Documentation: - Provide instructions on what packages should be installed to build the kernel in some popular Linux distributions. - Introduce the new kernel.org LLVM+Rust toolchains. - Explain '#[no_std]'. And a few other small bits" Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals [1] * tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits) docs: rust: quick-start: add section on Linux distributions rust: warn about `bindgen` versions 0.66.0 and 0.66.1 rust: start supporting several `bindgen` versions rust: work around `bindgen` 0.69.0 issue rust: avoid assuming a particular `bindgen` build rust: start supporting several compiler versions rust: simplify Clippy warning flags set rust: relax most deny-level lints to warnings rust: allow `dead_code` for never constructed bindings rust: init: simplify from `map_err` to `inspect_err` rust: macros: indent list item in `paste!`'s docs rust: add abstraction for `struct page` rust: uaccess: add typed accessors for userspace pointers uaccess: always export _copy_[from|to]_user with CONFIG_RUST rust: uaccess: add userspace pointers kbuild: rust-analyzer: improve comment documentation kbuild: rust-analyzer: better error handling docs: rust: no_std is used rust: alloc: add __GFP_HIGHMEM flag rust: alloc: fix typo in docs for GFP_NOWAIT ...
2024-07-27Merge tag 'apparmor-pr-2024-07-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor updates from John Johansen: "Cleanups - optimization: try to avoid refing the label in apparmor_file_open - remove useless static inline function is_deleted - use kvfree_sensitive to free data->data - fix typo in kernel doc Bug fixes: - unpack transition table if dfa is not present - test: add MODULE_DESCRIPTION() - take nosymfollow flag into account - fix possible NULL pointer dereference - fix null pointer deref when receiving skb during sock creation" * tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: unpack transition table if dfa is not present apparmor: try to avoid refing the label in apparmor_file_open apparmor: test: add MODULE_DESCRIPTION() apparmor: take nosymfollow flag into account apparmor: fix possible NULL pointer dereference apparmor: fix typo in kernel doc apparmor: remove useless static inline function is_deleted apparmor: use kvfree_sensitive to free data->data apparmor: Fix null pointer deref when receiving skb during sock creation
2024-07-27Merge tag 'landlock-6.11-rc1-houdini-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock fix from Mickaël Salaün: "Jann Horn reported a sandbox bypass for Landlock. This includes the fix and new tests. This should be backported" * tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Add cred_transfer test landlock: Don't lose track of restrictions on cred_transfer
2024-07-27Merge tag 'gpio-fixes-for-v6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - don't use sprintf() with non-constant format string * tag 'gpio-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: virtuser: avoid non-constant format string
2024-07-27Merge tag 'devicetree-fixes-for-6.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull more devicetree updates from Rob Herring: "Most of this is a treewide change to of_property_for_each_u32() which was small enough to do in one go before rc1 and avoids the need to create of_property_for_each_u32_some_new_name(). - Treewide conversion of of_property_for_each_u32() to drop internal arguments making struct property opaque - Add binding for Amlogic A4 SoC watchdog - Fix constraints for AD7192 'single-channel' property" * tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints of: remove internal arguments from of_property_for_each_u32() dt-bindings: watchdog: add support for Amlogic A4 SoCs
2024-07-27Merge tag 'iommu-fixes-v6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu fixes from Will Deacon: "We're still resolving a regression with the handling of unexpected page faults on SMMUv3, but we're not quite there with a fix yet. - Fix NULL dereference when freeing domain in Unisoc SPRD driver - Separate assignment statements with semicolons in AMD page-table code - Fix Tegra erratum workaround when the CPU is using 16KiB pages" * tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu: arm-smmu: Fix Tegra workaround for PAGE_SIZE mappings iommu/amd: Convert comma to semicolon iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en
2024-07-27Merge tag 'firewire-fixes-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fixes from Takashi Sakamoto: "The recent integration of compiler collections introduced the technology to check flexible array length at runtime by providing proper annotations. In v6.10 kernel, a patch was merged into firewire subsystem to utilize it, however the annotation was inadequate. There is also the related change for the flexible array in sound subsystem, but it causes a regression where the data in the payload of isochronous packet is incorrect for some devices. These bugs are now fixed" * tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case Revert "firewire: Annotate struct fw_iso_packet with __counted_by()"
2024-07-27Merge tag 'spi-fix-v6.11-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "The bulk of this is a series of fixes for the microchip-core driver mostly originating from one of their customers, I also applied an additional patch adding support for controlling the word size which came along with it since it's still the merge window and clearly had a bunch of fairly thorough testing. We also have a fix for the compatible used to bind spidev to the BH2228FV" * tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spidev: add correct compatible for Rohm BH2228FV dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string spi: microchip-core: add support for word sizes of 1 to 32 bits spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer spi: microchip-core: fix init function not setting the master and motorola modes spi: microchip-core: only disable SPI controller when register value change requires it spi: microchip-core: defer asserting chip select until just before write to TX FIFO spi: microchip-core: fix the issues in the isr
2024-07-27Merge tag 'regulator-fix-v6.11-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "These two commits clean up the excessively loose dependencies for the RZG2L USB VBCTRL regulator driver, ensuring it shouldn't prompt for people who can't use it" * tag 'regulator-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Further restrict RZG2L USB VBCTRL regulator dependencies regulator: renesas-usb-vbus-regulator: Update the default
2024-07-27Merge tag 'regmap-fix-v6.11-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "Arnd sent a workaround for a false positive warning which was showing up with GCC 14.1" * tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: maple: work around gcc-14.1 false-positive warning
2024-07-27Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A few clk driver fixes for the merge window to fix the build and boot on some SoCs. - Initialize struct clk_init_data in the TI da8xx-cfgchip driver so that stack contents aren't used for things like clk flags leading to unexpected behavior - Don't leak stack contents in a debug print in the new Sophgo clk driver - Disable the new T-Head clk driver on 32-bit targets to fix the build due to a division - Fix Samsung Exynos4 fin_pll wreckage from the clkdev rework done last cycle by using a struct clk_hw directly instead of a struct clk consumer" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: samsung: fix getting Exynos4 fin_pll rate from external clocks clk: T-Head: Disable on 32-bit Targets clk: sophgo: clk-sg2042-pll: Fix uninitialized variable in debug output clk: davinci: da8xx-cfgchip: Initialize clk_init_data before use
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 23:52:20 +0000