summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-15drm/amd/display: fix dcn3.1x mode validation on high bandwidth configCharlene Liu
[why] 1. correct dram_channel_width (was hard coded to 4 for 32bit) 2. use dm's is_hvm_enable status flag for hostvm_en input for dml. 3. add a function to override to all dcn3.1x. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Workaround to increase phantom pipe vactive in pipesplitGeorge Shen
[Why] Certain high resolution displays exhibit DCC line corruption with SubVP enabled. This is likely due to insufficient DCC meta data buffered immediately after the mclk switch. [How] Add workaround to increase phantom pipe vactive height by meta_row_height number of lines, thus increasing the amount of meta data buffered immediately after mclk switch finishes. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: enable dchub request limit for DCN 3.2.xJun Lei
[why] HW recommend we enable this for better DF QoS for DCN 3.2.x [how] Add interfaces to hubbub to program register Add initialization as part of init_hw Add default settings for DCN 3.2.x Add registry override for debug/tuning Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Support parsing VRAM info v3.0 from VBIOSGeorge Shen
[Why] For DCN3.2 and DCN3.21, VBIOS has switch to using v3.0 of the VRAM info struct. We should read and override the VRAM info in driver with values provided by VBIOS to support memory downbin cases. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: use low clocks for no plane configsDmytro Laktyushkin
Stream only configurations do not require DCFCLK, SOCCLK, DPPCLK or FCLK. They also always allow pstate change. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Use min transition for all SubVP plane add/removeAlvin Lee
[Description] - Whenever disabling a phantom pipe, we must run through the minimal transition sequence - In the case where SetVisibility = false for the main pipe, we also need to run through the min transtion when disabling the phantom pipes Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Program pipes for ODM when removing planesDillon Varone
[WHY?] Software state expects pipes to be configured for ODM, but due to the transition occurring on a plane disable, the ODM enablement code is not run. [HOW?] Update ODM when removing a plane, and dynamic ODM is active. Also acquire pipe lock when removing a plane. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: clean up some irq service code for dcn201Liu Xi
[Why and how] Clean up some irq service code for dcn201. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Liu Xi <xi.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Update SubVP Visual ConfirmDavid Galiffi
[Why] The visual confirm bar is displayed on all displays, but is only updated on a flip. If an update causes SubVP to be disabled on all displays, but there are no updates on the other displays, it will lead to stale information displayed on the non-active displays. An example of this is playing a fullscreen video on a rotated display. [How] Add a procedure to update visual confirm color for all pipes when committing a plane. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: David Galiffi <David.Galiffi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: fix dpms_off issue when disabling bios modeZhongwei Zhang
[Why] disable_vbios_mode_if_required() will set dpms_off to false during boot when pixel clk dismatches with driver requires. This will cause extra backlight on and off if OS call 2 times setmode. [How] Set dpms_off to true to keep power_off and let OS control BL by display's powerState. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix invalid DPIA AUX reply causing system hangStylon Wang
[Why] Some DPIA AUX replies have incorrect data length from original request. This could lead to overwriting of destination buffer if reply length is larger, which could cause invalid access to stack since many destination buffers are declared as local variables. [How] Check for invalid length from DPIA AUX replies and trigger a retry if reply length is not the same as original request. A DRM_WARN() dmesg log is also produced. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amdgpu: Add psp_13_0_10_ta firmware to modinfoCandice Li
TA firmware loaded on psp v13_0_10, but it is missing in modinfo. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Add HUBP surface flip interrupt handlerRodrigo Siqueira
On IGT, there is a test named amd_hotplug, and when the subtest basic is executed on DCN31, we get the following error: [drm] *ERROR* [CRTC:71:crtc-0] flip_done timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CRTC:71:crtc-0] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CONNECTOR:88:DP-1] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [PLANE:59:plane-3] commit wait timed out After enable the page flip log with the below command: echo -n 'format "[PFLIP]" +p' > /sys/kernel/debug/dynamic_debug/control It is possible to see that the flip was submitted, but DC never replied back, which generates time-out issues. This is an indication that the HUBP surface flip is missing. This commit fixes this issue by adding hubp1_set_flip_int to DCN31. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amd/display: Fix access timeout to DPIA AUX at boot timeStylon Wang
[Why] Since introduction of patch "Query DPIA HPD status.", link detection at boot could be accessing DPIA AUX, which will not succeed until DMUB outbox messaging is enabled and results in below dmesg logs: [ 160.840227] [drm:amdgpu_dm_process_dmub_aux_transfer_sync [amdgpu]] *ERROR* wait_for_completion_timeout timeout! [How] Enable DMUB outbox messaging before link detection at boot time. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-15drm/amdgpu: clarify DC checksAlex Deucher
There are several places where we don't want to check if a particular asic could support DC, but rather, if DC is enabled. Set a flag if DC is enabled and check for that rather than if a device supports DC or not. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdgpu: move non-DC vblank handling out of irq codeAlex Deucher
Move it into the DCE code for each generation. This avoids confusion with the different display paths. v2: no need for a hotplug worker for vkms Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdgpu: rework SR-IOV virtual display handlingAlex Deucher
virtual display is enabled unconditionally in SR-IOV, but without specifying the virtual_display module, the number of crtcs defaults to 0. Set a single display by default for SR-IOV if the virtual_display parameter is not set. Only enable virtual display by default on SR-IOV on asics which actually have display hardware. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdgpu: use proper DC check in amdgpu_display_supported_domains()Alex Deucher
amdgpu_device_asic_has_dc_support() just checks the asic itself. amdgpu_device_has_dc_support() is a runtime check which not only checks the asic, but also other things in the driver like whether virtual display is enabled. We want the latter here. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdgpu: Remove programming GCMC_VM_FB_LOCATION* on gfxhub_v3_0_3 in VFYifan Zha
[Why] GCMC_VM related registers should be programmed by PSP on host side. L1 and RLCG will block these regisers on VF. [How] Remove programming GCMC_VM_FB_LOCATION_BASE/TOP on gfxhub_v3_0_3 under SRIOV VF. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/amdgpu: Stop clearing kiq position during unloadYuBiao Wang
Do not clear kiq position in RLC_CP_SCHEDULER so that CP could perform IDLE-SAVE after VF fini. CPG also needs to be active in save command. v2: drop unused variable (Alex) Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-15drm/i915: Fix vma allocator debugTvrtko Ursulin
Add a missing colon which I accidentally removed in the recent logging changes. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: a10234fda466 ("drm/i915: Partial abandonment of legacy DRM logging macros") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221115101730.394880-1-tvrtko.ursulin@linux.intel.com
2022-11-15drm/i915: remove circ_buf.h includesJiri Slaby (SUSE)
The last user of macros from that include was removed in 2018 by the commit below. Fixes: 6cc42152b02b ("drm/i915: Remove support for legacy debugfs crc interface") Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221115070302.4064-1-jirislaby@kernel.org
2022-11-15drm/connector: Add pixel clock to cmdline modeMaxime Ripard
We'll need to get the pixel clock to generate proper display modes for all the current named modes. Let's add it to struct drm_cmdline_mode and fill it when parsing the named mode. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-12-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/modes: Fill drm_cmdline mode from named modesMaxime Ripard
The current code to deal with named modes will only set the mode name, and then it's up to drivers to try to match that name to whatever mode or configuration they see fit. The plan is to remove that need and move the named mode handling out of drivers and into the core, and only rely on modes and properties. Let's start by properly filling drm_cmdline_mode from a named mode. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-11-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/modes: Switch to named mode descriptorsMaxime Ripard
The current named mode parsing relies only on the mode name, and doesn't allow to specify any other parameter. Let's convert that string list to an array of a custom structure that will hold the name and some additional parameters in the future. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-10-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/modes: Move named modes parsing to a separate functionMaxime Ripard
The current construction of the named mode parsing doesn't allow to extend it easily. Let's move it to a separate function so we can add more parameters and modes. In order for the tests to still pass, some extra checks are needed, so it's not a 1:1 move. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-9-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/client: Add some tests for drm_connector_pick_cmdline_mode()Maxime Ripard
drm_connector_pick_cmdline_mode() is in charge of finding a proper drm_display_mode from the definition we got in the video= command line argument. Let's add some unit tests to make sure we're not getting any regressions there. Acked-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-8-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/tests: Add Kunit HelpersMaxime Ripard
As the number of kunit tests in KMS grows further, we start to have multiple test suites that, for example, need to register a mock DRM driver to interact with the KMS function they are supposed to test. Let's add a file meant to provide those kind of helpers to avoid duplication. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-2-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15docs/fb: Document current named modesMaxime Ripard
KMS supports a number of named modes already, but it's never been documented anywhere, let's fix that. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-1-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/vc4: hdmi: Fix pointer dereference before checkJosé Expósito
Commit 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug") introduced the vc4_hdmi_reset_link() function. This function dereferences the "connector" pointer before checking whether it is NULL or not. Rework variable assignment to avoid this issue. Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20221110134752.238820-3-jose.exposito89@gmail.com Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/vc4: hdmi: Pass vc4_hdmi to vc4_hdmi_supports_scrambling()José Expósito
Simplify vc4_hdmi_supports_scrambling() by changing its first parameter from struct drm_encoder to struct vc4_hdmi. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20221110134752.238820-2-jose.exposito89@gmail.com Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15Merge tag 'drm-next-20221109' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie
- Renesas RZ/G2L DSI support - Renesas DU Kconfig cleanup - Xilinx DPSUB fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y2u+mhkPJQ4de3q5@pendragon.ideasonboard.com
2022-11-14Documentation/gpu: Fix section in the wrong scopeLucas De Marchi
That section should still be inside "DRM client usage stats" rather than as a sibling. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107173209.2219571-2-lucas.demarchi@intel.com
2022-11-14drm/edid: Dump the EDID when drm_edid_get_panel_id() has an errorDouglas Anderson
If we fail to get a valid panel ID in drm_edid_get_panel_id() we'd like to see the EDID that was read so we have a chance of understanding what's wrong. There's already a function for that, so let's call it in the error case. NOTE: edid_block_read() has a retry loop in it, so actually we'll only print the block read back from the final attempt. This still seems better than nothing. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221021130637.1.I8c2de0954a4e54e0c59a72938268e2ead91daa98@changeid
2022-11-14Merge drm/drm-next into drm-intel-nextRodrigo Vivi
Catch up on 6.1-rc cycle in order to solve the intel_backlight conflict on linux-next. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-11-14drm/i915/guc: handle interrupts from media GuCDaniele Ceraolo Spurio
The render and media GuCs share the same interrupt enable register, so we can no longer disable interrupts when we disable communication for one of the GuCs as this would impact the other GuC. Instead, we keep the interrupts always enabled in HW and use a variable in the GuC structure to determine if we want to service the received interrupts or not. v2: use MTL_ prefix for reg definition (Matt) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-7-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/guc: define media GT GuC send regsDaniele Ceraolo Spurio
The media GT shares the G-unit with the root GT, so a second set of communication registers is required for the media GuC. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-6-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/mtl: Handle wopcm per-GT and limit calculations.Aravind Iddamsetty
With MTL standalone media architecture the wopcm layout has changed, with separate partitioning in WOPCM for the root GT GuC and the media GT GuC. The size of WOPCM is 4MB with the lower 2MB reserved for the media GT and the upper 2MB for the root GT. Given that MTL has GuC deprivilege, the WOPCM registers are pre-locked by the bios. Therefore, we can skip all the math for the partitioning and just limit ourselves to sanity-checking the values. v2: fix makefile file ordering (Jani) v3: drop XELPM_SAMEDIA_WOPCM_SIZE, check huc instead of VDBOX (John) v4: further clarify commit message, remove blank line (John) Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-5-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/guc: Add GuC deprivilege feature to MTLStuart Summers
MTL supports GuC deprivilege. Add the feature flag to this platform. Signed-off-by: Stuart Summers <stuart.summers@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-4-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/uc: use different ggtt pin offsets for uc loadsDaniele Ceraolo Spurio
Our current FW loading process is the same for all FWs: - Pin FW to GGTT at the start of the ggtt->uc_fw node - Load the FW - Unpin This worked because we didn't have a case where 2 FWs would be loaded on the same GGTT at the same time. On MTL, however, this can happen if both GTs are reset at the same time, so we can't pin everything in the same spot and we need to use separate offset. For simplicity, instead of calculating the exact required size, we reserve a 2MB slot for each fw. v2: fail fetch if FW is > 2MBs, improve comments (John) v3: more comment improvements (John) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-3-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/uc: fetch uc firmwares for each GTDaniele Ceraolo Spurio
The FW binaries are independently loaded on each GT. On MTL, the memory is shared so we could potentially re-use a single allocation, but on discrete multi-gt platforms we are going to need independent copies, so it is easier to do the same on MTL as well, given that the amount of duplicated memory is relatively small (~500K). Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-2-daniele.ceraolospurio@intel.com
2022-11-14drm/i915/huc: only load HuC on GTs that have VCS enginesDaniele Ceraolo Spurio
On MTL the primary GT doesn't have any media capabilities, so no video engines and no HuC. We must therefore skip the HuC fetch and load on that specific case. Given that other multi-GT platforms might have HuC on the primary GT, we can't just check for that and it is easier to instead check for the lack of VCS engines. Based on code from Aravind Iddamsetty v2: clarify which engine_mask is used for each GT and why (Tvrtko) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108020600.3575467-1-daniele.ceraolospurio@intel.com
2022-11-14drm/gem-vram: Fix deadlock in drm_gem_vram_vmap()Dmitry Osipenko
Recently DRM framebuffer core and all drivers were moved to unlocked vmapping functions that take the reservation lock. The drm_gem_vram_vmap() was missed out by accident and now deadlocks drivers that use drm_gem_vram helpers when framebuffer is updated, like Bochs driver. Remove the locking from drm_gem_vram_v[un]map() functions to fix the deadlock. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 79e2cf2e7a19 ("drm/gem: Take reservation lock for vmap/vunmap operations") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221113233850.427704-1-dmitry.osipenko@collabora.com
2022-11-14drm/panel: Add NewVision NV3051D MIPI-DSI LCD panelChris Morgan
Support NewVision NV3051D panels as found on the Anbernic RG353P and RG353V. The underlying LCD part number for the RG353x devices is unknown, so the device name and a fallback for the driver IC is used instead. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> [Fixed checkpatch moan about parens] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221111203130.9615-4-macroalpha82@gmail.com
2022-11-14dt-bindings: display: panel: Add NewVision NV3051D bindingsChris Morgan
Add documentation for the NewVision NV3051D panel bindings. Note that for the two expected consumers of this panel binding the underlying LCD model is unknown. Name "anbernic,rg353p-panel" is used because the hardware itself is known as "anbernic,rg353p". Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221111203130.9615-3-macroalpha82@gmail.com
2022-11-14dt-bindings: vendor-prefixes: add NewVision vendor prefixChris Morgan
NewVision (also sometimes written as New Vision) is a company based in Shenzen that manufactures ICs for controlling LCD panels. https://www.newvisiondisplay.com/ Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221111203130.9615-2-macroalpha82@gmail.com
2022-11-14drm/i915: Simplify internal helper function signatureTvrtko Ursulin
Since we are now storing the GT backpointer in the wa list we can drop the explicit struct intel_gt * argument to wa_list_apply. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221110124633.3135026-1-tvrtko.ursulin@linux.intel.com
2022-11-14drm/i915/mtl: Add Wa_14017073508 for SAMediaBadal Nilawar
This workaround is added for Media tile of MTL A step. It is to help pcode workaround which handles the hardware issue seen during package C2/C3 transitions due to RC6 entry/exit transitions on Media tile. As a part of workaround pcode expect kmd to send mailbox message "media busy" when components of Media tile are in use and "media idle" otherwise. As per workaround description gucrc need to be disabled so enabled host based RC for Media tile. v2: - Correct workaround id (Matt) - Fix review comments (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103184559.2306481-1-badal.nilawar@intel.com
2022-11-14drm/nouveau/disp: fix incorrect/broken hdmi methodsBen Skeggs
These are fixes from Lyude, and were meant to have been included in the last round of drm-next patches. - Fix some nasty memory issues that broke Lyude's display: - 0 initialize both nvif args and parsed HDMI infoframe buffers - Fixed missing memset(…, 0, …) for nvif args before sending VSI infoframe - Fixed incorrect data pointer and size in nvkm_uoutp_mthd_infoframe() (was previously pointing at the start of the nvif_outp_infoframe_args struct instead of at the start of the infoframe data - Get rid of duplicated scdc assignments, since we only use it to write the scdc registers Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-11-12drm/sti: Use drm_mode_copy()Ville Syrjälä
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-8-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:20:29 +0000