| Age | Commit message (Collapse) | Author |
|---|
|
The driver uses a static CSI-2 virtual channel mapping where all virtual
channels from an RX port are mapped to a virtual channel number matching
the RX port number.
The UB960 and UB9702 have different registers for the purpose, and the
UB9702 version is not correct. Each of the VC_ID_MAP registers do not
contain a single mapping, as the driver currently thinks, but two.
This can cause received VCs other than 0 to be mapped in a wrong way.
Fix this by writing both mappings to each register.
Cc: stable@vger.kernel.org
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
UB9702 does not have SP and EQ registers, but the driver uses them in
log_status(). Fix this by separating the SP and EQ related log_status()
work into a separate function (for clarity) and calling that function
only for UB960.
Cc: stable@vger.kernel.org
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
UB9702 doesn't have the registers for SP and EQ. Adjust the code in
ub960_rxport_wait_locks() to not use those registers for UB9702. As
these values are only used for a debug print here, there's no functional
change.
Cc: stable@vger.kernel.org
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
UB9702 has the refclk freq register at a different offset than UB960,
but the code uses the UB960's offset for both chips. Fix this.
The refclk freq is only used for a debug print, so there's no functional
change here.
Cc: stable@vger.kernel.org
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The ub913 and ub953 drivers call fwnode_handle_put(priv->sd.fwnode) as
part of their remove process, and if the driver is removed multiple
times, eventually leads to put "overflow", possibly causing memory
corruption or crash.
The fwnode_handle_put() is a leftover from commit 905f88ccebb1 ("media:
i2c: ds90ub9x3: Fix sub-device matching"), which changed the code
related to the sd.fwnode, but missed removing these fwnode_handle_put()
calls.
Cc: stable@vger.kernel.org
Fixes: 905f88ccebb1 ("media: i2c: ds90ub9x3: Fix sub-device matching")
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
No need to continue probing when the CCS static data parser fails. Improve
this by checking the return value and correctly exiting on failure.
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Besides returning an error, also print a warning when
ccs_data_parse() fails.
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When ipu6 driver is waiting for the ivsc driver to probe,
which can fail or take long time, we can get plenty of ipu6
messages like this:
[ 15.454049] intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff
[ 15.456600] intel-ipu6 0000:00:05.0: FW version: 20230925
[ 15.458292] intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff
[ 15.461186] intel-ipu6 0000:00:05.0: FW version: 20230925
[ 15.463616] intel-ipu6 0000:00:05.0: IPU6 in non-secure mode touch 0x0 mask 0xff
[ 15.466490] intel-ipu6 0000:00:05.0: FW version: 20230925
Print them only when debugging is enabled to do not flood dmesg.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The latest datasheet (Rev.0.70) updates the D-PHY start-up sequence for
D-PHY operation. Unfortunately the datasheet do not add any additional
documentation on the magic values.
This have been tested together with the MAX96724 available on the single
board test platform and it works as expected.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The datasheet lists that "Maximum exposure time is frame
length -25 row periods, where frame length is set by
registers {0x380E, 0x380F}".
However this driver had OV9282_EXPOSURE_OFFSET set to 12
which allowed that restriction to be violated, and would
result in very under-exposed images.
Correct the offset.
Fixes: 14ea315bbeb7 ("media: i2c: Add ov9282 camera sensor driver")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix cpu latency qos list corruption like below. It happens when
we do not remove cpu latency request on error path and free
corresponding memory.
[ 30.634378] l7 kernel: list_add corruption. prev->next should be next (ffffffff9645e960), but was 0000000100100001. (prev=ffff8e9e877e20a8).
[ 30.634388] l7 kernel: WARNING: CPU: 2 PID: 2008 at lib/list_debug.c:32 __list_add_valid_or_report+0x83/0xa0
<snip>
[ 30.634640] l7 kernel: Call Trace:
[ 30.634650] l7 kernel: <TASK>
[ 30.634659] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634669] l7 kernel: ? __warn.cold+0x93/0xf6
[ 30.634678] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634690] l7 kernel: ? report_bug+0xff/0x140
[ 30.634702] l7 kernel: ? handle_bug+0x58/0x90
[ 30.634712] l7 kernel: ? exc_invalid_op+0x17/0x70
[ 30.634723] l7 kernel: ? asm_exc_invalid_op+0x1a/0x20
[ 30.634733] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0
[ 30.634742] l7 kernel: plist_add+0xdd/0x140
[ 30.634754] l7 kernel: pm_qos_update_target+0xa0/0x1f0
[ 30.634764] l7 kernel: cpu_latency_qos_update_request+0x61/0xc0
[ 30.634773] l7 kernel: intel_dp_aux_xfer+0x4c7/0x6e0 [i915 1f824655ed04687c2b0d23dbce759fa785f6d033]
Reported-by: Genes Lists <lists@sapience.com>
Closes: https://lore.kernel.org/linux-media/c0e94be466b367f1a3cfdc3cb7b1a4f47e5953ae.camel@sapience.com/
Fixes: f50c4ca0a820 ("media: intel/ipu6: add the main input system driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
ccs_limits is allocated in ccs_read_all_limits() after the allocation of
mdata.backing. Ensure that resources are freed in the reverse order of
their allocation by moving out_free_ccs_limits up.
Fixes: a11d3d6891f0 ("media: ccs: Read CCS static data from firmware binaries")
Cc: stable@vger.kernel.org
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Later versions of the V4H datasheet adds documentation for the line
order register needed to support all possible configurations. Extend the
driver to take the line order for each data line into account when
configuring the device.
Unfortunately not all registers initially thought to be involved in line
order configuration where directly related. One magic value is still in
the driver and left as-is, but it is not related to line order as that
procedure have now been documented.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Extend the fwnode parsing to validate and fill in the CSI-2 C-PHY
line-orders order properties as defined in MIPI Discovery and
Configuration (DisCo) Specification for Imaging.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Sakari Ailus: Use ARRAY_SIZE() instead of an integer.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Each data lane on a CSI-2 C-PHY bus uses three phase encoding and is
constructed from three physical wires. The wires are referred to as A, B
and C and their default order is ABC. However to ease hardware design
the specification allows for the wires to be switched in any order.
Add a vendor neutral property to describe the line order used. The
property name 'line-orders', the possible values it can be assigned and
there names are taken from the MIPI Discovery and Configuration (DisCo)
Specification for Imaging.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add a 2-5ms delay when coming out of standby and before reading the
sensor info register durning probe, as instructed by the datasheet. This
standby delay is already present when the sensor starts streaming.
During a cold-boot, reading the IMX296_SENSOR_INFO register would often
return a value of 0x0000, if this delay is not present before.
Fixes: cb33db2b6ccf ("media: i2c: IMX296 camera sensor driver")
Cc: stable@vger.kernel.org
Tested-by: Alexandru Ardelean <aardelean@baylibre.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add trailing \n to dev_dbg and dev_err prints where missing.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Fixes: 9214e86c0cc1 ("media: i2c: Add imx412 camera sensor driver")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
IMX462 is the successor to IMX290, and wants very minor
changes to the register setup.
Add the relevant configuration to support it.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
IMX462 is the successor to IMX290, which is supportable by
the existing IMX290 driver via a new compatible string.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Reviewing the datasheets, register 0x3011 is meant to be 0x02 on imx327
and 0x00 on imx290.
Move it out of the common registers, and set it appropriately in the
sensor specific sections. (Included for imx290 to be explicit, rather
than relying on the default value).
Fixes: 2d41947ec2c0 ("media: i2c: imx290: Add support for imx327 variant")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The imx327 only supports up to 29.4dB of analogue gain, vs
the imx290 going up to 30dB. Both are in 0.3dB steps.
As we now have model specific config, fix this mismatch,
and delete the comment referencing it.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
ccs_data_parse() releases the allocated in-memory data structure when the
parser fails, but it does not clean up parsed metadata that is there to
help access the actual data. Do that, in order to return the data
structure in a sane state.
Fixes: a6b396f410b1 ("media: ccs: Add CCS static data parser library")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The length field of the CCS static data blocks was mishandled, leading to
wrong interpretation of the length header for blocks that are 16 kiB in
size. Such large blocks are very, very rare and so this wasn't found
earlier.
As the length is used as part of input validation, the issue has no
security implications.
Fixes: a6b396f410b1 ("media: ccs: Add CCS static data parser library")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add check for the return value of clk_enable() to guarantee the success.
Fixes: 81a409bfd551 ("media: marvell-ccic: provide a clock for the sensor")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
[Sakari Ailus: Fix spelling in commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Remove unused reference #f5 and obsolete reference f3.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The company name has update to Rockchip Electronics Co., Ltd.
since 2021.
And change Co.Ltd to Co., Ltd. to fix mail server warning:
DBL_SPAM(6.50)[co.ltd:url];
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241216100444.3726048-1-andyshrk@163.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As per a long time request from Ezequiel, who left the project around
2020, replace the top maintainers with Benjamin and myself, and also
keeping Philipp, who is still active in the subsystem.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Store the chroma and motion vector offsets for each frame so that they
can be used later when the resolution changes.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The Hantro decoder non post-processed pixel-format steps are different
from the post-processed ones. Fix the steps according to the hardware
limitations. Since reference frame pixel-format issues have been fixed,
it is possible to use V4L2_PIX_FMT_NV15_4L4 rather V4L2_PIX_FMT_P010_4L4
for 10bit streams.
Fluster VP9 score goes up to 207/305.
HEVC score is still 141/147.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The Hantro decoder always produces tiled pixel-formats, but when the
post-processor is used, the destination pixel-format is a non-tiled
pixel-format. This causes an incorrect computation of the reference
frame size and offsets. Get and save the correct tiled pixel-format for
8 and 10 bit streams to solve these computation issues.
Fluster VP9 score increase to 166/305 (vs 145/305).
HEVC score is still 141/147.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In order to have fine-grained control, use cmdq_pkt_eoc() and
cmdq_pkt_jump_rel() to replace cmdq_pkt_finalize().
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use the cmdq_pkt_create() and cmdq_pkt_destroy() common functions
instead of implementing specific mdp3 versions.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In order to have fine-grained control, use cmdq_pkt_eoc() and
cmdq_pkt_jump_rel() to replace cmdq_pkt_finalize().
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Just like was done with MM_REG_WRITE, remove the mask from the
MM_REG_POLL macro, leaving MM_REG_POLL_MASK to be used when a mask is
required, and update the call sites accordingly. In this case, all calls
require a mask, so MM_REG_POLL remains unused, but at least this makes
the MM_REG_POLL macros consistent with the MM_REG_WRITE ones.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There are two macros to issue a cmdq write: MM_REG_WRITE_MASK and
MM_REG_WRITE, but confusingly, both of them take a mask parameter. The
difference is that MM_REG_WRITE additionally checks whether the mask
passed in contains the register mask, in which case, the 0xffffffff mask
is passed to cmdq_pkt_write_mask(), effectively disregarding the mask
and calling cmdq_pkt_write() as an optimization.
Move that optimization to the MM_REG_WRITE_MASK macro and make
MM_REG_WRITE the variant that doesn't take a mask, directly calling to
cmdq_pkt_write().
Change the call sites to MM_REG_WRITE whenever a mask wasn't necessary
(ie 0xffffffff or a <register>_MASK was passed as mask) and in other
cases to MM_REG_WRITE_MASK.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
A few macros declare variadic arguments even though the underlying
functions don't support them. Remove them.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
cmdq_pkt_write_mask() boils down to a cmdq_pkt_write() when the mask is
0xFFFFFFFF. Call cmdq_pkt_write() directly in those cases to simplify
the code.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The stm32mp25 supports both parallel & csi inputs.
An additional clock control is necessary.
Skeleton of the subdev structures for the stm32mp25 is added,
identical for the time being to the stm32mp13 however more subdeves
will be added in further commits.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add the stm32mp25 compatible for the DCMIPP.
The stm32mp25 distinguish with the stm32mp13 by the fact that:
- supports also csi inputs in addition to parallel inputs
- requires an addition csi clock to be present
Add also access-controllers, an optional property that
allows a peripheral to refer to one or more domain access controller(s).
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add hw_revision field information of the media controller so that
application can distinguish between variants of DCMIPP implementations.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Avoid duplication of enumerated pixelformat on the bytecap
video capture device. Indeed, since the bytecap format list
contains both CSI & parallel 16bits formats, ensure that same
pixelformat are not reported twice when performing enumeration
of supported formats.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add 1X16 RGB & YUV formats support within bytecap & byteproc.
Slightly change the link_validate function to be able to validate
against either 1X16 or 2X8 variant of a format.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add support for bayer formats from 10 to 14 bits.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
On stm32mp25, the dcmipp can accept data coming from a CSI bus in
addition to the parallel interface. Add this support into
dcmipp-input subdev.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
In preparation of the introduction of dcmipp csi input support, rename
the dcmipp_parallel subdev into a generic dcmipp_input which will be in
charge of handling both parallel input & csi input.
Only structures / variables / functions and file naming are changed without
any functional modifications.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Replace s_stream ops with enable_streams and disable_streams.
At the same time, use v4l2_subdev_enable_streams and
v4l2_subdev_disable_streams functions instead of
direct s_stream calls.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Rely on v4l2_subdev_is_streaming in order to know if the subdev
is streaming or not instead of relying on a local variable.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The STM32 CSI controller is tightly coupled with the DCMIPP and act as an
input stage to receive data coming from the sensor and transferring
them into the DCMIPP.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add the stm32 csi controller description.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Correct the call to dma_set_mask_and_coherent which should be set
to DMA_BIT_MASK(32).
Fixes: 28e0f3772296 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
