summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-19Merge branch 'mscc-RGMII'David S. Miller
Antoine Tenart says: ==================== net: phy: mscc: add support for RGMII MAC mode This series adds support for the RGMII MAC mode for the VSC8584 PHY family and for RGMII_ID modes (Tx and/or Rx). I decided to drop the custom delay for now. I made some tests and it seemed to be working quite well. If we find out we really need to lower the delay, which I doubt, I'll send support for it. Since v2: - Dropped support for custom dt bindings. - Add the 2ns delay based on the interface mode. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: RGMII skew delay configurationAntoine Tenart
This patch adds support for configuring the RGMII skew delays in Rx and Tx. The Rx and Tx skews are set based on the interface mode. By default their configuration is set to the default value in hardware (0.2ns); this means the driver do not rely anymore on the bootloader configuration. Then based on the interface mode being used, a 2ns delay is added: - RGMII_ID adds it for both Rx and Tx. - RGMII_RXID adds it for Rx. - RGMII_TXID adds it for Tx. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: add support for RGMII MAC modeAntoine Tenart
This patch adds support for connecting VSC8584 PHYs to the MAC using RGMII. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19Merge branch 'mlxsw-Offload-TC-action-skbedit-priority'David S. Miller
Ido Schimmel says: ==================== mlxsw: Offload TC action skbedit priority Petr says: The TC action "skbedit priority P" has the effect of assigning skbprio of P to SKBs that it's applied on. In HW datapath of a switch, the corresponding action is assignment of internal switch priority. Spectrum switches allow setting of packet priority based on an ACL action, which is good match for the skbedit priority gadget. This patchset therefore implements offloading of this action to the Spectrum ACL engine. After a bit of refactoring in patch #1, patch #2 extends the skbedit action to support offloading of "priority" subcommand. On mlxsw side, in patch #3, the QOS_ACTION flexible action is added, with fields necessary for priority adjustment. In patch #4, "skbedit priority" is connected to that action. Patch #5 implements a new forwarding selftest, suitable for both SW- and HW-datapath testing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19selftests: forwarding: Add an skbedit priority selftestPetr Machata
Add a test that runs traffic through a port such that skbedit priority action acts on it during forwarding. Test that at egress, it is classified correctly according to the new priority at a PRIO qdisc. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mlxsw: spectrum_flower: Offload FLOW_ACTION_PRIORITYPetr Machata
Offload action skbedit priority when keyed to a flower classifier. The skb->priority field in Linux is very generic, so only allow setting the bottom 8 priorities and bounce anything else. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mlxsw: core: Add QOS_ACTIONPetr Machata
The QOS_ACTION is used for manipulating the QoS attributes of a packet. Add the corresponding defines and helpers, in particular for the switch_priority override. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: tc_skbedit: Make the skbedit priority offloadablePetr Machata
The skbedit action "priority" is used for adjusting SKB priority. Allow drivers to offload the action by introducing two new skbedit getters and a new flow action, and initializing appropriately in tc_setup_flow_action(). Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: tc_skbedit: Factor a helper out of is_tcf_skbedit_{mark, ptype}()Petr Machata
The two functions is_tcf_skbedit_mark() and is_tcf_skbedit_ptype() have a very similar structure. A follow-up patch will add one more such function. Instead of more cut'n'pasting, extract a helper function that checks whether a TC action is an skbedit with the required flag. Convert the two existing functions into thin wrappers around the helper. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: stmmac: dwmac_lib: remove unnecessary checks in dwmac_dma_reset()Dejin Zheng
it will check the return value of dwmac_dma_reset() in the stmmac_init_dma_engine() function and report an error if the return value is not zero. so don't need check here. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: add missing check on a phy_write return valueAntoine Tenart
Commit a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") introduced a call to 'phy_write' storing its return value to a variable called 'ret'. But 'ret' never was checked for a possible error being returned, and hence was not used at all. Fix this by checking the return value and exiting the function if an error was returned. As this does not fix a known bug, this commit is mostly cosmetic and not sent as a fix. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: ipa: Remove unused including <linux/version.h>YueHaibing
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: ipa: fix platform_no_drv_owner.cocci warningsYueHaibing
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19liquidio: remove set but not used variable 's'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'octeon_chip_specific_setup': drivers/net/ethernet/cavium/liquidio/lio_main.c:1378:8: warning: variable 's' set but not used [-Wunused-but-set-variable] It's not used since commit b6334be64d6f ("net/liquidio: Delete driver version assignment") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: sched: Do not assume RTNL is held in tunnel key action helpersIdo Schimmel
The cited commit removed RTNL from tc_setup_flow_action(), but the function calls two tunnel key action helpers that use rtnl_dereference() to fetch the action's parameters. This leads to "suspicious RCU usage" warnings [1][2]. Change the helpers to use rcu_dereference_protected() while requiring the action's lock to be held. This is safe because the two helpers are only called from tc_setup_flow_action() which acquires the lock. [1] [ 156.950855] ============================= [ 156.955463] WARNING: suspicious RCU usage [ 156.960085] 5.6.0-rc5-custom-47426-gdfe43878d573 #2409 Not tainted [ 156.967116] ----------------------------- [ 156.971728] include/net/tc_act/tc_tunnel_key.h:31 suspicious rcu_dereference_protected() usage! [ 156.981583] [ 156.981583] other info that might help us debug this: [ 156.981583] [ 156.990675] [ 156.990675] rcu_scheduler_active = 2, debug_locks = 1 [ 156.998205] 1 lock held by tc/877: [ 157.002187] #0: ffff8881cbf7bea0 (&(&p->tcfa_lock)->rlock){+...}, at: tc_setup_flow_action+0xbe/0x4f78 [ 157.012866] [ 157.012866] stack backtrace: [ 157.017886] CPU: 2 PID: 877 Comm: tc Not tainted 5.6.0-rc5-custom-47426-gdfe43878d573 #2409 [ 157.027253] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ 157.037389] Call Trace: [ 157.040170] dump_stack+0xfd/0x178 [ 157.044034] lockdep_rcu_suspicious+0x14a/0x153 [ 157.049157] tc_setup_flow_action+0x89f/0x4f78 [ 157.054227] fl_hw_replace_filter+0x375/0x640 [ 157.064348] fl_change+0x28ec/0x4f6b [ 157.088843] tc_new_tfilter+0x15e2/0x2260 [ 157.176801] rtnetlink_rcv_msg+0x8d6/0xb60 [ 157.190915] netlink_rcv_skb+0x177/0x460 [ 157.208884] rtnetlink_rcv+0x21/0x30 [ 157.212925] netlink_unicast+0x5d0/0x7f0 [ 157.227728] netlink_sendmsg+0x981/0xe90 [ 157.245416] ____sys_sendmsg+0x76d/0x8f0 [ 157.255348] ___sys_sendmsg+0x10f/0x190 [ 157.320308] __sys_sendmsg+0x115/0x1f0 [ 157.342553] __x64_sys_sendmsg+0x7d/0xc0 [ 157.346987] do_syscall_64+0xc1/0x600 [ 157.351142] entry_SYSCALL_64_after_hwframe+0x49/0xbe [2] [ 157.432346] ============================= [ 157.436937] WARNING: suspicious RCU usage [ 157.441537] 5.6.0-rc5-custom-47426-gdfe43878d573 #2409 Not tainted [ 157.448559] ----------------------------- [ 157.453204] include/net/tc_act/tc_tunnel_key.h:43 suspicious rcu_dereference_protected() usage! [ 157.463042] [ 157.463042] other info that might help us debug this: [ 157.463042] [ 157.472112] [ 157.472112] rcu_scheduler_active = 2, debug_locks = 1 [ 157.479529] 1 lock held by tc/877: [ 157.483442] #0: ffff8881cbf7bea0 (&(&p->tcfa_lock)->rlock){+...}, at: tc_setup_flow_action+0xbe/0x4f78 [ 157.494119] [ 157.494119] stack backtrace: [ 157.499114] CPU: 2 PID: 877 Comm: tc Not tainted 5.6.0-rc5-custom-47426-gdfe43878d573 #2409 [ 157.508485] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ 157.518628] Call Trace: [ 157.521416] dump_stack+0xfd/0x178 [ 157.525293] lockdep_rcu_suspicious+0x14a/0x153 [ 157.530425] tc_setup_flow_action+0x993/0x4f78 [ 157.535505] fl_hw_replace_filter+0x375/0x640 [ 157.545650] fl_change+0x28ec/0x4f6b [ 157.570204] tc_new_tfilter+0x15e2/0x2260 [ 157.658199] rtnetlink_rcv_msg+0x8d6/0xb60 [ 157.672315] netlink_rcv_skb+0x177/0x460 [ 157.690278] rtnetlink_rcv+0x21/0x30 [ 157.694320] netlink_unicast+0x5d0/0x7f0 [ 157.709129] netlink_sendmsg+0x981/0xe90 [ 157.726813] ____sys_sendmsg+0x76d/0x8f0 [ 157.736725] ___sys_sendmsg+0x10f/0x190 [ 157.801721] __sys_sendmsg+0x115/0x1f0 [ 157.823967] __x64_sys_sendmsg+0x7d/0xc0 [ 157.828403] do_syscall_64+0xc1/0x600 [ 157.832558] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: b15e7a6e8d31 ("net: sched: don't take rtnl lock during flow_action setup") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: bridge: vlan: include stats in dumps if requestedNikolay Aleksandrov
This patch adds support for vlan stats to be included when dumping vlan information. We have to dump them only when explicitly requested (thus the flag below) because that disables the vlan range compression and will make the dump significantly larger. In order to request the stats to be included we add a new dump attribute called BRIDGE_VLANDB_DUMP_FLAGS which can affect dumps with the following first flag: - BRIDGE_VLANDB_DUMPF_STATS The stats are intentionally nested and put into separate attributes to make it easier for extending later since we plan to add per-vlan mcast stats, drop stats and possibly STP stats. This is the last missing piece from the new vlan API which makes the dumped vlan information complete. A dump request which should include stats looks like: [BRIDGE_VLANDB_DUMP_FLAGS] |= BRIDGE_VLANDB_DUMPF_STATS A vlandb entry attribute with stats looks like: [BRIDGE_VLANDB_ENTRY] = { [BRIDGE_VLANDB_ENTRY_STATS] = { [BRIDGE_VLANDB_STATS_RX_BYTES] [BRIDGE_VLANDB_STATS_RX_PACKETS] ... } } Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mptcp: rename fourth ack fieldPaolo Abeni
The name is misleading, it actually tracks the 'fully established' status. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18Merge tag 'mlx5-updates-2020-03-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-03-17 1) Compiler warnings and cleanup for the connection tracking series 2) Bug fixes for the connection tracking series 3) Fix devlink port register sequence 4) Last five patches in the series, By Eli cohen Add the support for forwarding traffic between two eswitch uplink representors (Hairpin for eswitch), using mlx5 termination tables to change the direction of a packet in hw from RX to TX pipeline. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18net: phy: realtek: read actual speed to detect downshiftHeiner Kallweit
At least some integrated PHY's in RTL8168/RTL8125 chip versions support downshift, and the actual link speed can be read from a vendor-specific register. Info about this register was provided by Realtek. More details about downshift configuration (e.g. number of attempts) aren't available, therefore the downshift tunable is not implemented. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18net: sched: Fix hw_stats_type setting in pedit loopPetr Machata
In the commit referenced below, hw_stats_type of an entry is set for every entry that corresponds to a pedit action. However, the assignment is only done after the entry pointer is bumped, and therefore could overwrite memory outside of the entries array. The reason for this positioning may have been that the current entry's hw_stats_type is already set above, before the action-type dispatch. However, if there are no more actions, the assignment is wrong. And if there are, the next round of the for_each_action loop will make the assignment before the action-type dispatch anyway. Therefore fix this issue by simply reordering the two lines. Fixes: 74522e7baae2 ("net: sched: set the hw_stats_type in pedit loop") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18Merge branch 'mlxsw-spectrum_cnt-Expose-counter-resources'David S. Miller
Ido Schimmel says: ==================== mlxsw: spectrum_cnt: Expose counter resources Jiri says: Capacity and utilization of existing flow and RIF counters are currently unavailable to be seen by the user. Use the existing devlink resources API to expose the information: $ sudo devlink resource show pci/0000:00:10.0 -v pci/0000:00:10.0: name kvd resource_path /kvd size 524288 unit entry dpipe_tables none name span_agents resource_path /span_agents size 8 occ 0 unit entry dpipe_tables none name counters resource_path /counters size 79872 occ 44 unit entry dpipe_tables none resources: name flow resource_path /counters/flow size 61440 occ 4 unit entry dpipe_tables none name rif resource_path /counters/rif size 18432 occ 40 unit entry dpipe_tables none ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18selftests: mlxsw: Add tc action hw_stats testsJiri Pirko
Add tests for mlxsw hw_stats types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Expose devlink resource occupancy for countersJiri Pirko
Implement occupancy counting for counters and expose over devlink resource API. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Consolidate subpools initializationJiri Pirko
Put all init operations related to subpools into mlxsw_sp_counter_sub_pools_init(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Move config validation along with resource registerJiri Pirko
Move the validation of subpools configuration, to avoid possible over commitment to resource registration. Add WARN_ON to indicate bug in the code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Expose subpool sizes over devlink resourcesJiri Pirko
Implement devlink resources support for counter pools. Move the subpool sizes calculations into the new resources register function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Add entry_size_res_id for each subpool and use it to ↵Jiri Pirko
query entry size Add new field to subpool struct that would indicate which resource id should be used to query the entry size for the subpool from the device. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Move sub_pools under per-instance pool structJiri Pirko
Currently, the global static array of subpools is used. Make it per-instance as multiple instances of the mlxsw driver can have different values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18selftests: spectrum-2: Adjust tc_flower_scale limit according to current ↵Jiri Pirko
counter count With the change that made the code to query counter bank size from device instead of using hard-coded value, the number of available counters changed for Spectrum-2. Adjust the limit in the selftests. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Query bank size from FW resourcesJiri Pirko
The bank size is different between Spectrum versions. Also it is a resource that can be queried. So instead of hard coding the value in code, query it from the firmware. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18cxgb4: rework TC filter rule insertion across regionsRahul Lakkireddy
Chelsio NICs have 3 filter regions, in following order of priority: 1. High Priority (HPFILTER) region (Highest Priority). 2. HASH region. 3. Normal FILTER region (Lowest Priority). Currently, there's a 1-to-1 mapping between the prio value passed by TC and the filter region index. However, it's possible to have multiple TC rules with the same prio value. In this case, if a region is exhausted, no attempt is made to try inserting the rule in the next available region. So, rework and remove the 1-to-1 mapping. Instead, dynamically select the region to insert the filter rule, as long as the new rule's prio value doesn't conflict with existing rules across all the 3 regions. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18netfilter: revert introduction of egress hookDaniel Borkmann
This reverts the following commits: 8537f78647c0 ("netfilter: Introduce egress hook") 5418d3881e1f ("netfilter: Generalize ingress hook") b030f194aed2 ("netfilter: Rename ingress hook include file") >From the discussion in [0], the author's main motivation to add a hook in fast path is for an out of tree kernel module, which is a red flag to begin with. Other mentioned potential use cases like NAT{64,46} is on future extensions w/o concrete code in the tree yet. Revert as suggested [1] given the weak justification to add more hooks to critical fast-path. [0] https://lore.kernel.org/netdev/cover.1583927267.git.lukas@wunner.de/ [1] https://lore.kernel.org/netdev/20200318.011152.72770718915606186.davem@davemloft.net/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: David Miller <davem@davemloft.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Alexei Starovoitov <ast@kernel.org> Nacked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18Merge branch 's390-qeth-next'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: updates 2020-03-18 please apply the following patch series for qeth to netdev's net-next tree. This consists of three parts: 1) support for __GFP_MEMALLOC, 2) several ethtool enhancements (.set_channels, SW Timestamping), 3) the usual cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: use dev->reg_stateJulian Wiedmann
To check whether a netdevice has already been registered, look at NETREG_REGISTERED to replace some hacks I added a while ago. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: remove gratuitous NULL checksJulian Wiedmann
qeth_do_ioctl() is only reached through our own net_device_ops, so we can trust that dev->ml_priv still contains what we put there earlier. qeth_bridgeport_an_set() is an internal function that doesn't require such sanity checks. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: add phys_to_virt() translation for AOBJulian Wiedmann
Data addresses in the AOB are absolute, and need to be translated before being fed into kmem_cache_free(). Currently this phys_to_virt() is a no-op. Also see commit 2db01da8d25f ("s390/qdio: fill SBALEs with absolute addresses"). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: don't report hard-coded driver versionJulian Wiedmann
Versions are meaningless for an in-kernel driver. Instead use the UTS_RELEASE that is set by ethtool_get_drvinfo(). Cc: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: add SW timestamping support for IQD devicesJulian Wiedmann
This adds support for SOF_TIMESTAMPING_TX_SOFTWARE. No support for non-IQD devices, since they orphan the skb in their xmit path. To play nice with TX bulking, set the timestamp when the buffer that contains the skb(s) is actually flushed out to HW. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: balance the TX queue selection for IQD devicesJulian Wiedmann
For ucast traffic, qeth_iqd_select_queue() falls back to netdev_pick_tx(). This will potentially use skb_tx_hash() to distribute the flow over all active TX queues - so txq 0 is a valid selection, and qeth_iqd_select_queue() needs to check for this and put it on some other queue. As a result, the distribution for ucast flows is unbalanced and hits QETH_IQD_MIN_UCAST_TXQ heavier than the other queues. Open-coding a custom variant of skb_tx_hash() isn't an option, since netdev_pick_tx() also gives us eg. access to XPS. But we can pull a little trick: add a single TC class that excludes the mcast txq, and thus encourage skb_tx_hash() to not pick the mcast txq. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: allow configuration of TX queues for IQD devicesJulian Wiedmann
Similar to the support for z/VM NICs, but we need to take extra care about the dedicated mcast queue: 1. netdev_pick_tx() is unaware of this limitation and might select the mcast txq. Catch this. 2. require at least _two_ TX queues - one for ucast, one for mcast. 3. when reducing the number of TX queues, there's a potential race where netdev_cap_txqueue() over-rules the selected txq index and falls back to index 0. This would place ucast traffic on the mcast queue, and result in TX errors. So for IQD, reject a reduction while the interface is running. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: allow configuration of TX queues for z/VM NICsJulian Wiedmann
Add support for ETHTOOL_SCHANNELS to change the count of active TX queues. Since all TX queue structs are pre-allocated and -registered, we just need to trivially adjust dev->real_num_tx_queues. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: remove prio-queueing support for z/VM NICsJulian Wiedmann
z/VM NICs don't offer HW QoS for TX rings. So just use netdev_pick_tx() to distribute the connections equally over all enabled TX queues. We start with just 1 enabled TX queue (this matches the typical configuration without prio-queueing). A follow-on patch will allow users to enable additional TX queues. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: use memory reserves in TX slow pathJulian Wiedmann
When falling back to an allocation from the HW header cache, check if the skb is eligible for using memory reserves. This only makes a difference if the cache is empty and needs to be refilled. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18s390/qeth: use memory reserves to back RX buffersJulian Wiedmann
Use dev_alloc_page() for backing the RX buffers with pages. This way we pick up __GFP_MEMALLOC. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Use nf_flow_offload_tuple() to fetch flow stats, from Paul Blakey. 2) Add new xt_IDLETIMER hard mode, from Manoj Basapathi. Follow up patch to clean up this new mode, from Dan Carpenter. 3) Add support for geneve tunnel options, from Xin Long. 4) Make sets built-in and remove modular infrastructure for sets, from Florian Westphal. 5) Remove unused TEMPLATE_NULLS_VAL, from Li RongQing. 6) Statify nft_pipapo_get, from Chen Wandun. 7) Use C99 flexible-array member, from Gustavo A. R. Silva. 8) More descriptive variable names for bitwise, from Jeremy Sowden. 9) Four patches to add tunnel device hardware offload to the flowtable infrastructure, from wenxu. 10) pipapo set supports for 8-bit grouping, from Stefano Brivio. 11) pipapo can switch between nibble and byte grouping, also from Stefano. 12) Add AVX2 vectorized version of pipapo, from Stefano Brivio. 13) Update pipapo to be use it for single ranges, from Stefano. 14) Add stateful expression support to elements via control plane, eg. counter per element. 15) Re-visit sysctls in unprivileged namespaces, from Florian Westphal. 15) Add new egress hook, from Lukas Wunner. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17mptcp: move msk state update to subflow_syn_recv_sock()Paolo Abeni
After commit 58b09919626b ("mptcp: create msk early"), the msk socket is already available at subflow_syn_recv_sock() time. Let's move there the state update, to mirror more closely the first subflow state. The above will also help multiple subflow supports. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17Merge branch 'net-add-phylink-support-for-PCS'David S. Miller
Russell King says: ==================== net: add phylink support for PCS This series adds support for IEEE 802.3 register set compliant PCS for phylink. In order to do this, we: 1. convert BUG_ON() in existing accessors to WARN_ON_ONCE() and return an error. 2. add accessors for modifying a MDIO device register, and use them in phylib, rather than duplicating the code from phylib. 3. add support for decoding the advertisement from clause 22 compatible register sets for clause 37 advertisements and SGMII advertisements. 4. add support for clause 45 register sets for 10GBASE-R PCS. These have been tested on the LX2160A Clearfog-CX platform. v2: eliminate use of BUG_ON() in the accessors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: phylink: pcs: add 802.3 clause 45 helpersRussell King
Implement helpers for PCS accessed via the MII bus using 802.3 clause 45 cycles for 10GBASE-R. Only link up/down is supported, 10G full duplex is assumed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: phylink: pcs: add 802.3 clause 22 helpersRussell King
Implement helpers for PCS accessed via the MII bus using 802.3 clause 22 cycles, conforming to 802.3 clause 37 and Cisco SGMII specifications for the advertisement word. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: mdiobus: add APIs for modifying a MDIO device registerRussell King
Add APIs for modifying a MDIO device register, similar to the existing phy_modify() group of functions, but at mdiobus level instead. Adapt __phy_modify_changed() to use the new mdiobus level helper. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 01:25:54 +0000