summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-20hsr: Fix a compilation errorxiaofeng.yan
A compliation error happen when building branch 5.5-rc7 In file included from net/hsr/hsr_main.c:12:0: net/hsr/hsr_main.h:194:20: error: two or more data types in declaration specifiers static inline void void hsr_debugfs_rename(struct net_device *dev) So Removed one void. Fixes: 4c2d5e33dcd3 ("hsr: rename debugfs file when interface name is changed") Signed-off-by: xiaofeng.yan <yanxiaofeng7@jd.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20mmc: sdhci-of-esdhc: fix serious issue clock is always disabledYangbo Lu
This patch is to fix a serious issue that clock is always disabled in esdhc_of_set_clock(). Fixes: 1b21a701aed9 ("mmc: sdhci-of-esdhc: fix clock setting for different controller versions") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lore.kernel.org/r/20200120094835.28050-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-of-esdhc: fix transfer mode register readingYangbo Lu
The standard SD controller uses two 16-bit registers for command sending. 0xC: Transfer Mode Register 0xE: Command Register But the eSDHC controller uses one 32-bit register instead. 0xC: XFERTYPE For Transfer Mode Register and Command Register writing, the eSDHC driver will store Transfer Mode Register value in a variable first. When Command Register writing happens, driver will directly write a 32-bit value into XFERTYPE register. But for Transfer Mode Register reading, driver just returns a actual value. This may cause issue for some read-modify-write operations. We should make both reading and write on that variable for Transfer Mode Register. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lore.kernel.org/r/20200117063858.37296-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Fix incorrect switch to HS modeAl Cooper
When switching from any MMC speed mode that requires 1.8v (HS200, HS400 and HS400ES) to High Speed (HS) mode, the system ends up configured for SDR12 with a 50MHz clock which is an illegal mode. This happens because the SDHCI_CTRL_VDD_180 bit in the SDHCI_HOST_CONTROL2 register is left set and when this bit is set, the speed mode is controlled by the SDHCI_CTRL_UHS field in the SDHCI_HOST_CONTROL2 register. The SDHCI_CTRL_UHS field will end up being set to 0 (SDR12) by sdhci_set_uhs_signaling() because there is no UHS mode being set. The fix is to change sdhci_set_uhs_signaling() to set the SDHCI_CTRL_UHS field to SDR25 (which is the same as HS) for any switch to HS mode. This was found on a new eMMC controller that does strict checking of the speed mode and the corresponding clock rate. It caused the switch to HS400 mode to fail because part of the sequence to switch to HS400 requires a switch from HS200 to HS before going to HS400. This issue was previously fixed by commit c894e33ddc191 ("mmc: sdhci: Fix incorrect switch to HS mode") and later removed by commit 07bcc411567c ("Revert \"mmc: sdhci: Fix incorrect switch to HS mode\"") because it caused failures with some SD cards on AM65X systems. The fix will now be done in a platform specific callback instead of common sdhci code. Signed-off-by: Al Cooper <alcooperx@gmail.com> Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200113210706.11972-7-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)Al Cooper
The latest Arasan controller first used in the 7216 now supports CQE so enable this feature. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-6-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Add shutdown callbackAl Cooper
Shutdown controller and disable it's clocks to insure max power savings in S5 on systems that leave power on. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-5-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Fix driver to defer on clk_get deferAl Cooper
The new SCMI clock protocol driver does not get probed that early in boot. Brcmstb drivers typically have the following code when getting a clock: priv->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(priv->clk)) { dev_err(&pdev->dev, "Clock not found in Device Tree\n"); priv->clk = NULL; } This commit changes the driver to do what is below. priv->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(priv->clk)) { if (PTR_ERR(priv->clk) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_err(&pdev->dev, "Clock not found in Device Tree\n"); priv->clk = NULL; } Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-4-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Add ability to use HS400ES transfer modeAl Cooper
The latest eMMC JEDEC specification version 5.1 added a new transfer mode, HS400 with enhanced strobe (HS400ES). This mode will be selected if both the host controller and eMMC device support it. The latest Arasan 5.1 controller in the 7216a0 supports this mode. The "Host Controller Specification" has not been updated so the controller register bit used to enable this mode is not specified and varies the with controller vendor. The Linux SDHCI driver supplies a callback for enabling HS400ES mode and that callback will be used to supply a routine that will set the proper bit in the Arasan Vendor register. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-3-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0Al Cooper
Add 7216b0 with supports CQE, HS400, HS400-ES and SDR104. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-2-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: core: limit probe clock frequency to configured f_maxMichał Mirosław
Currently MMC core disregards host->f_max during card initialization phase. Obey upper boundary for the clock frequency and skip faster speeds when they are above the limit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/f471bceaf237d582d746bd289c4c4f3639cb7b45.1577962382.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-milbeaut: Remove redundant platform_get_irq error messageYueHaibing
platform_get_irq() will call dev_err() itself on failure, so there is no need for the driver to also do this. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116144322.57308-1-yuehaibing@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: fix an issue of mixing different typesChunyan Zhang
Fix an issue reported by sparse, since mixed types of parameters are used on calling dmaengine_prep_slave_sg(). Fixes: 36e1da441fec (mmc: sdhci: add support for using external DMA devices) Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200120033223.897-1-zhang.chunyan@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20Merge branch 'fixes' into nextUlf Hansson
2020-01-20platform/x86: asus-nb-wmi: Support left round button on N56VBPaul Cercueil
The N56VB laptop has a round button located on the left side above the keyboard. Map it to F13 since it does not have any predeterminated purpose. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Update versionSrinivas Pandruvada
As we added new set of mailbox commands, increment version. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Change the order for clos disableSrinivas Pandruvada
In turbo-freq or base-freq auto mode, for disable, first disable the feature and then disable clos. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Fix result display for turbo-freq auto modeSrinivas Pandruvada
The turbo-freq enable with auto mode, prints result for the last possible CPU, which is not correct when either CPU is not present or user wants command to be limited to a single die/package. For example, in the below command user wants to limit to die/package 0, but the "turbo-freq --auto" result is displayed using the other package. $ sudo intel-speed-select -c 0 turbo-freq enable -a Intel(R) Speed Select Technology package-0 die-0 cpu-0 turbo-freq enable:success package--1 die-0 cpu-31 turbo-freq --auto enable:success Since we do have to traverse all CPUs, don't display CPU info for "turbo-freq --auto", as we already displayed the result for turbo-freq enable with the CPU information. With the fix, the same command results in: $ sudo intel-speed-select -c 0 turbo-freq enable -a Intel(R) Speed Select Technology package-0 die-0 cpu-0 turbo-freq enable:success turbo-freq --auto enable:success Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Add support for core-power discoverySrinivas Pandruvada
It is possible that BIOS may not enable core-power feature. In this case this additional interface will allow to enable from this utility. Also the information dump, includes the current status of core-power. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20platform/x86: ISST: Allow additional core-power mailbox commandsSrinivas Pandruvada
To discover core-power capability, some new mailbox commands are added. Allow those commands to execute. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20mmc: sdhci: fix minimum clock rate for v3 controllerMichał Mirosław
For SDHCIv3+ with programmable clock mode, minimal clock frequency is still base clock / max(divider). Minimal programmable clock frequency is always greater than minimal divided clock frequency. Without this patch, SDHCI uses out-of-spec initial frequency when multiplier is big enough: mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz [for 480 MHz source clock divided by 1024] The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode. Fixes: c3ed3877625f ("mmc: sdhci: add support for programmable clock mode") Cc: <stable@vger.kernel.org> # 4f6aa3264af4: mmc: tegra: Only advertise UHS modes if IO regulator is present Cc: <stable@vger.kernel.org> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Add special reset capabilityFaiz Abbas
Some omap controllers need software to monitor a 0->1->0 for software reset. Add a SDHCI_OMAP_SPECIAL_RESET flag to indicate this. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-11-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Add am335x and am437x specific compatiblesFaiz Abbas
Add support for new compatible for TI's am335x and am437x devices. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-10-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20dt-bindings: sdhci-omap: Add am335x and am437x specific bindingsFaiz Abbas
Add binding for the TI's sdhci-omap controller present in am335x and am437x devices. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200116105154.7685-9-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Disable data timeout interrupt during eraseFaiz Abbas
Disable data timeout interrupt during an erase operation. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-8-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: Refactor sdhci_set_timeout()Faiz Abbas
Refactor sdhci_set_timeout() such that platform drivers can do some functionality in a set_timeout() callback and then call __sdhci_set_timeout() to complete the operation. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-7-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: Convert sdhci_set_timeout_irq() to non-staticFaiz Abbas
Export sdhci_set_timeout_irq() so that it is accessible from platform drivers. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-6-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Add using external dmaChunyan Zhang
sdhci-omap can support both external dma controller via dmaengine framework as well as ADMA which standard SD host controller provides. Fixes by Faiz Abbas <fazi_abbas@ti.com>: 1. Switch to DMA slave mode when using external DMA 2. Add offset to mapbase Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-5-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: add support for using external DMA devicesChunyan Zhang
Some standard SD host controllers can support both external dma controllers as well as ADMA/SDMA in which the SD host controller acts as DMA master. TI's omap controller is the case as an example. Currently the generic SDHCI code supports ADMA/SDMA integrated in the host controller but does not have any support for external DMA controllers implemented using dmaengine, meaning that custom code is needed for any systems that use an external DMA controller with SDHCI. Fixes by Faiz Abbas <faiz_abbas@ti.com>: 1. Map scatterlists before dmaengine_prep_slave_sg() 2. Use dma_async() functions inside of the send_command() path and call terminate_sync() in non-atomic context in case of an error. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-4-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: Factor out some operations set to their own functionsFaiz Abbas
In preparation for adding external dma support, factor out data initialization, block info and mrq_done to their own functions. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-3-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20dt-bindings: sdhci-omap: Add properties for using external dmaChunyan Zhang
sdhci-omap can support both external dma controller via dmaengine framework as well as ADMA which standard SD host controller provides. Add binding documentation for these external dma properties. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200116105154.7685-2-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20dt-bindings: mmc: fsl-imx-esdhc: add i.MX8MP compatible stringAnson Huang
Add compatible string for imx8mp Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1578893602-14395-2-git-send-email-Anson.Huang@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20net: ip6_gre: fix moving ip6gre between namespacesNiko Kortstrom
Support for moving IPv4 GRE tunnels between namespaces was added in commit b57708add314 ("gre: add x-netns support"). The respective change for IPv6 tunnels, commit 22f08069e8b4 ("ip6gre: add x-netns support") did not drop NETIF_F_NETNS_LOCAL flag so moving them from one netns to another is still denied in IPv6 case. Drop NETIF_F_NETNS_LOCAL flag from ip6gre tunnels to allow moving ip6gre tunnel endpoints between network namespaces. Signed-off-by: Niko Kortstrom <niko.kortstrom@nokia.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Linux 5.5-rc7v5.5-rc7Linus Torvalds
2020-01-19Merge tag 'riscv/for-v5.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Three fixes for RISC-V: - Don't free and reuse memory containing the code that CPUs parked at boot reside in. - Fix rv64 build problems for ubsan and some modules by adding logical and arithmetic shift helpers for 128-bit values. These are from libgcc and are similar to what's present for ARM64. - Fix vDSO builds to clean up their own temporary files" * tag 'riscv/for-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Less inefficient gcc tishift helpers (and export their symbols) riscv: delete temporary files riscv: make sure the cores stay looping in .Lsecondary_park
2020-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix non-blocking connect() in x25, from Martin Schiller. 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski. 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang. 4) Limit size of TSO packets properly in lan78xx driver, from Eric Dumazet. 5) r8152 probe needs an endpoint sanity check, from Johan Hovold. 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from John Fastabend. 7) hns3 needs short frames padded on transmit, from Yunsheng Lin. 8) Fix netfilter ICMP header corruption, from Eyal Birger. 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu. 10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan. 11) Fix memory leak in act_ctinfo, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) cxgb4: reject overlapped queues in TC-MQPRIO offload cxgb4: fix Tx multi channel port rate limit net: sched: act_ctinfo: fix memory leak bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal. bnxt_en: Fix ipv6 RFS filter matching logic. bnxt_en: Fix NTUPLE firmware command failures. net: systemport: Fixed queue mapping in internal ring map net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec net: dsa: sja1105: Don't error out on disabled ports with no phy-mode net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset net: hns: fix soft lockup when there is not enough memory net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key() net/sched: act_ife: initalize ife->metalist earlier netfilter: nat: fix ICMP header corruption on ICMP errors net: wan: lapbether.c: Use built-in RCU list checking netfilter: nf_tables: fix flowtable list del corruption netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks() netfilter: nf_tables: remove WARN and add NLA_STRING upper limits netfilter: nft_tunnel: ERSPAN_VERSION must not be null netfilter: nft_tunnel: fix null-attribute check ...
2020-01-19Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two runtime PM fixes and one leak fix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: iop3xx: Fix memory leak in probe error path i2c: tegra: Properly disable runtime PM on driver's probe error i2c: tegra: Fix suspending in active runtime PM state
2020-01-19ARM: 8950/1: ftrace/recordmcount: filter relocation typesAlex Sverdlin
Scenario 1, ARMv7 ================= If code in arch/arm/kernel/ftrace.c would operate on mcount() pointer the following may be generated: 00000230 <prealloc_fixed_plts>: 230: b5f8 push {r3, r4, r5, r6, r7, lr} 232: b500 push {lr} 234: f7ff fffe bl 0 <__gnu_mcount_nc> 234: R_ARM_THM_CALL __gnu_mcount_nc 238: f240 0600 movw r6, #0 238: R_ARM_THM_MOVW_ABS_NC __gnu_mcount_nc 23c: f8d0 1180 ldr.w r1, [r0, #384] ; 0x180 FTRACE currently is not able to deal with it: WARNING: CPU: 0 PID: 0 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1ad/0x230() ... CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.116-... #1 ... [<c0314e3d>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14) [<c03115e9>] (show_stack) from [<c051a7f1>] (dump_stack+0x81/0xa8) [<c051a7f1>] (dump_stack) from [<c0321c5d>] (warn_slowpath_common+0x69/0x90) [<c0321c5d>] (warn_slowpath_common) from [<c0321cf3>] (warn_slowpath_null+0x17/0x1c) [<c0321cf3>] (warn_slowpath_null) from [<c038ee9d>] (ftrace_bug+0x1ad/0x230) [<c038ee9d>] (ftrace_bug) from [<c038f1f9>] (ftrace_process_locs+0x27d/0x444) [<c038f1f9>] (ftrace_process_locs) from [<c08915bd>] (ftrace_init+0x91/0xe8) [<c08915bd>] (ftrace_init) from [<c0885a67>] (start_kernel+0x34b/0x358) [<c0885a67>] (start_kernel) from [<00308095>] (0x308095) ---[ end trace cb88537fdc8fa200 ]--- ftrace failed to modify [<c031266c>] prealloc_fixed_plts+0x8/0x60 actual: 44:f2:e1:36 ftrace record flags: 0 (0) expected tramp: c03143e9 Scenario 2, ARMv4T ================== ftrace: allocating 14435 entries in 43 pages ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2029 ftrace_bug+0x204/0x310 CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.5 #1 Hardware name: Cirrus Logic EDB9302 Evaluation Board [<c0010a24>] (unwind_backtrace) from [<c000ecb0>] (show_stack+0x20/0x2c) [<c000ecb0>] (show_stack) from [<c03c72e8>] (dump_stack+0x20/0x30) [<c03c72e8>] (dump_stack) from [<c0021c18>] (__warn+0xdc/0x104) [<c0021c18>] (__warn) from [<c0021d7c>] (warn_slowpath_null+0x4c/0x5c) [<c0021d7c>] (warn_slowpath_null) from [<c0095360>] (ftrace_bug+0x204/0x310) [<c0095360>] (ftrace_bug) from [<c04dabac>] (ftrace_init+0x3b4/0x4d4) [<c04dabac>] (ftrace_init) from [<c04cef4c>] (start_kernel+0x20c/0x410) [<c04cef4c>] (start_kernel) from [<00000000>] ( (null)) ---[ end trace 0506a2f5dae6b341 ]--- ftrace failed to modify [<c000c350>] perf_trace_sys_exit+0x5c/0xe8 actual: 1e:ff:2f:e1 Initializing ftrace call sites ftrace record flags: 0 (0) expected tramp: c000fb24 The analysis for this problem has been already performed previously, refer to the link below. Fix the above problems by allowing only selected reloc types in __mcount_loc. The list itself comes from the legacy recordmcount.pl script. Link: https://lore.kernel.org/lkml/56961010.6000806@pengutronix.de/ Cc: stable@vger.kernel.org Fixes: ed60453fa8f8 ("ARM: 6511/1: ftrace: add ARM support for C version of recordmcount") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-19cxgb4: reject overlapped queues in TC-MQPRIO offloadRahul Lakkireddy
A queue can't belong to multiple traffic classes. So, reject any such configuration that results in overlapped queues for a traffic class. Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19cxgb4: fix Tx multi channel port rate limitRahul Lakkireddy
T6 can support 2 egress traffic management channels per port to double the total number of traffic classes that can be configured. In this configuration, if the class belongs to the other channel, then all the queues must be bound again explicitly to the new class, for the rate limit parameters on the other channel to take effect. So, always explicitly bind all queues to the port rate limit traffic class, regardless of the traffic management channel that it belongs to. Also, only bind queues to port rate limit traffic class, if all the queues don't already belong to an existing different traffic class. Fixes: 4ec4762d8ec6 ("cxgb4: add TC-MATCHALL classifier egress offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19net: sched: act_ctinfo: fix memory leakEric Dumazet
Implement a cleanup method to properly free ci->params BUG: memory leak unreferenced object 0xffff88811746e2c0 (size 64): comm "syz-executor617", pid 7106, jiffies 4294943055 (age 14.250s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ c0 34 60 84 ff ff ff ff 00 00 00 00 00 00 00 00 .4`............. backtrace: [<0000000015aa236f>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<0000000015aa236f>] slab_post_alloc_hook mm/slab.h:586 [inline] [<0000000015aa236f>] slab_alloc mm/slab.c:3320 [inline] [<0000000015aa236f>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549 [<000000002c946bd1>] kmalloc include/linux/slab.h:556 [inline] [<000000002c946bd1>] kzalloc include/linux/slab.h:670 [inline] [<000000002c946bd1>] tcf_ctinfo_init+0x21a/0x530 net/sched/act_ctinfo.c:236 [<0000000086952cca>] tcf_action_init_1+0x400/0x5b0 net/sched/act_api.c:944 [<000000005ab29bf8>] tcf_action_init+0x135/0x1c0 net/sched/act_api.c:1000 [<00000000392f56f9>] tcf_action_add+0x9a/0x200 net/sched/act_api.c:1410 [<0000000088f3c5dd>] tc_ctl_action+0x14d/0x1bb net/sched/act_api.c:1465 [<000000006b39d986>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424 [<00000000fd6ecace>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<0000000047493d02>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 [<00000000bdcf8286>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000bdcf8286>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328 [<00000000fc5b92d9>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917 [<00000000da84d076>] sock_sendmsg_nosec net/socket.c:639 [inline] [<00000000da84d076>] sock_sendmsg+0x54/0x70 net/socket.c:659 [<0000000042fb2eee>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330 [<000000008f23f67e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384 [<00000000d838e4f6>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417 [<00000000289a9cb1>] __do_sys_sendmsg net/socket.c:2426 [inline] [<00000000289a9cb1>] __se_sys_sendmsg net/socket.c:2424 [inline] [<00000000289a9cb1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424 Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-18riscv: Less inefficient gcc tishift helpers (and export their symbols)Olof Johansson
The existing __lshrti3 was really inefficient, and the other two helpers are also needed to compile some modules. Add the missing versions, and export all of the symbols like arm64 already does. This code is based on the assembly generated by libgcc builds. This fixes a build break triggered by ubsan: riscv64-unknown-linux-gnu-ld: lib/ubsan.o: in function `.L2': ubsan.c:(.text.unlikely+0x38): undefined reference to `__ashlti3' riscv64-unknown-linux-gnu-ld: ubsan.c:(.text.unlikely+0x42): undefined reference to `__ashrti3' Signed-off-by: Olof Johansson <olof@lixom.net> [paul.walmsley@sifive.com: use SYM_FUNC_{START,END} instead of ENTRY/ENDPROC; note libgcc origin] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-18Merge tag 'mtd/fixes-for-5.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "Raw NAND: - GPMI: Fix the suspend/resume SPI-NOR: - Fix quad enable on Spansion like flashes - Fix selection of 4-byte addressing opcodes on Spansion" * tag 'mtd/fixes-for-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resume mtd: rawnand: gpmi: Fix suspend/resume problem mtd: spi-nor: Fix quad enable for Spansion like flashes mtd: spi-nor: Fix selection of 4-byte addressing opcodes on Spansion
2020-01-18Merge tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Back from LCA2020, fixes wasn't too busy last week, seems to have quieten down appropriately, some amdgpu, i915, then a core mst fix and one fix for virtio-gpu and one for rockchip: core mst: - serialize down messages and clear timeslots are on unplug amdgpu: - Update golden settings for renoir - eDP fix i915: - uAPI fix: Remove dash and colon from PMU names to comply with tools/perf - Fix for include file that was indirectly included - Two fixes to make sure VMA are marked active for error capture virtio: - maintain obj reservation lock when submitting cmds rockchip: - increase link rate var size to accommodate rates" * tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Reorder detect_edp_sink_caps before link settings read. drm/amdgpu: update goldensetting for renoir drm/dp_mst: Have DP_Tx send one msg at a time drm/dp_mst: clear time slots for ports invalid drm/i915/pmu: Do not use colons or dashes in PMU names drm/rockchip: fix integer type used for storing dp data rate drm/i915/gt: Mark ring->vma as active while pinned drm/i915/gt: Mark context->state vma as active while pinned drm/i915/gt: Skip trying to unbind in restore_ggtt_mappings drm/i915: Add missing include file <linux/math64.h> drm/virtio: add missing virtio_gpu_array_lock_resv call
2020-01-18riscv: delete temporary filesIlie Halip
Temporary files used in the VDSO build process linger on even after make mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp. Delete them once they're no longer needed. Signed-off-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - a resctrl fix for uninitialized objects found by debugobjects - a resctrl memory leak fix - fix the unintended re-enabling of the of SME and SEV CPU flags if memory encryption was disabled at bootup via the MSR space" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Ensure clearing of SME/SEV features is maintained x86/resctrl: Fix potential memory leak x86/resctrl: Fix an imbalance in domain_remove_cpu()
2020-01-18Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Three fixes: fix link failure on Alpha, fix a Sparse warning and annotate/robustify a lockless access in the NOHZ code" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/sched: Annotate lockless access to last_jiffies_update lib/vdso: Make __cvdso_clock_getres() static time/posix-stubs: Provide compat itimer supoprt for alpha
2020-01-18Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cpu/SMT fix from Ingo Molnar: "Fix a build bug on CONFIG_HOTPLUG_SMT=y && !CONFIG_SYSFS kernels" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/SMT: Fix x86 link error without CONFIG_SYSFS
2020-01-18Merge branch 'ras-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS fix from Ingo Molnar: "Fix a thermal throttling race that can result in easy to trigger boot crashes on certain Ice Lake platforms" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/therm_throt: Do not access uninitialized therm_work
2020-01-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Tooling fixes, three Intel uncore driver fixes, plus an AUX events fix uncovered by the perf fuzzer" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Remove PCIe3 unit for SNR perf/x86/intel/uncore: Fix missing marker for snr_uncore_imc_freerunning_events perf/x86/intel/uncore: Add PCI ID of IMC for Xeon E3 V5 Family perf: Correctly handle failed perf_get_aux_event() perf hists: Fix variable name's inconsistency in hists__for_each() macro perf map: Set kmap->kmaps backpointer for main kernel map chunks perf report: Fix incorrectly added dimensions as switch perf data file tools lib traceevent: Fix memory leakage in filter_event
2020-01-18Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Three fixes: - Fix an rwsem spin-on-owner crash, introduced in v5.4 - Fix a lockdep bug when running out of stack_trace entries, introduced in v5.4 - Docbook fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Fix kernel crash when spinning on RWSEM_OWNER_UNKNOWN futex: Fix kernel-doc notation warning locking/lockdep: Fix buffer overrun problem in stack_trace[]
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 12:00:15 +0000