| Age | Commit message (Collapse) | Author |
|---|
|
bcachefs currently populates fiemap data from the extents btree.
This works correctly when the fiemap sync flag is provided, but if
not, it skips all delalloc extents that have not yet been flushed.
This is because delalloc extents from buffered writes are first
stored as reservation in the pagecache, and only become resident in
the extents btree after writeback completes.
Update the fiemap implementation to process holes between extents by
scanning pagecache for data, via seek data/hole. If a valid data
range is found over a hole in the extent btree, fake up an extent
key and flag the extent as delalloc for reporting to userspace.
Note that this does not necessarily change behavior for the case
where there is dirty pagecache over already written extents, where
when in COW mode, writeback will allocate new blocks for the
underlying ranges. The existing behavior is consistent with btrfs
and it is recommended to use the sync flag for the most up to date
extent state from fiemap.
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
The bulk of the loop in bch2_fiemap() involves processing the
current extent key from the iter, including following indirections
and trimming the extent size and such. This patch makes a few
changes to reduce the size of the loop and facilitate future changes
to support delalloc extents.
Define a new bch_fiemap_extent structure to wrap the bkey buffer
that holds the extent key to report to userspace along with
associated fiemap flags. Update bch2_fill_extent() to take the
bch_fiemap_extent as a param instead of the individual fields.
Finally, lift the bulk of the extent processing into a
bch2_fiemap_extent() helper that takes the current key and formats
the bch_fiemap_extent appropriately for the fill function.
No functional changes intended by this patch.
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
FIEMAP_FLAG_SYNC handling was deliberately moved into core code in
commit 45dd052e67ad ("fs: handle FIEMAP_FLAG_SYNC in fiemap_prep"),
released in kernel v5.8. Update bcachefs accordingly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
At the end of the inode, on an extents iterator, peek_slot() has to
advance to the next position to avoid returning a 0 size extent, which
is not allowed.
Changing iter->pos confuses peek_prev(), but we don't need to call
peek_slot() in this case.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The issue this assert is guarding against is that in
BTREE_ITER_filter_snapshots mode we only want to be iterating within a
single inode number - if we iterate into another inode number with keys
for a different snapshot tree, we'll loop arbitrarily long before
finding a key we can return.
This comes up in the unit tests, where we're using inode 0 for our test
keys.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The peek_end() tests expect an empty btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we aren't mounting with the correct degraded option, it's helpful to
know that before we fail to mount degraded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
casefolding results in additional aliases on lookup for the
non-casefolded names - these need invalidating on unlink.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add casefolding to bch2_lookup_trans:
During the delay between when casefolding was written and when it was
merged, the main filesystem lookup path grew self healing - which meant
it was no longer using bch2_dirent_lookup_trans(), where casefolding on
lookups happens.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The XOL (execute out-of-line) buffer is used to single-step the
replaced instruction(s) for uprobes. The RISC-V port was missing a
proper fence.i (i$ flushing) after constructing the XOL buffer, which
can result in incorrect execution of stale/broken instructions.
This was found running the BPF selftests "test_progs:
uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the
uprobes tests randomly blew up.
Reviewed-by: Guo Ren <guoren@kernel.org>
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250419111402.1660267-2-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The flush_icache_range() function is implemented as a "function-like
macro with unused parameters", which can result in "unused variables"
warnings.
Replace the macro with a static inline function, as advised by
Documentation/process/coding-style.rst.
Fixes: 08f051eda33b ("RISC-V: Flush I$ when making a dirty page executable")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250419111402.1660267-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The single core change is an obvious bug fix (and falls within the LF
guidelines for patches from sanctioned entities). The other driver
changes are a bit larger but likewise pretty obvious"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpi3mr: Add level check to control event logging
scsi: ufs: core: Add NULL check in ufshcd_mcq_compl_pending_transfer()
scsi: core: Clear flags for scsi_cmnd that did not complete
scsi: ufs: Introduce quirk to extend PA_HIBERN8TIME for UFS devices
scsi: ufs: qcom: Add quirks for Samsung UFS devices
scsi: target: iscsi: Fix timeout on deleted connection
scsi: mpi3mr: Reset the pending interrupt flag
scsi: mpi3mr: Fix pending I/O counter
scsi: ufs: mcq: Add NULL check in ufshcd_mcq_abort()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"Fix some Landlock audit issues, add related tests, and updates
documentation"
* tag 'landlock-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Update log documentation
landlock: Fix documentation for landlock_restrict_self(2)
landlock: Fix documentation for landlock_create_ruleset(2)
selftests/landlock: Add PID tests for audit records
selftests/landlock: Factor out audit fixture in audit_test
landlock: Log the TGID of the domain creator
landlock: Remove incorrect warning
|
|
insn_decoder_test found a problem with decoding APX CTEST instructions:
Found an x86 instruction decoder bug, please report this.
ffffffff810021df 62 54 94 05 85 ff ctestneq
objdump says 6 bytes, but insn_get_length() says 5
It happens because x86-opcode-map.txt doesn't specify arguments for the
instruction and the decoder doesn't expect to see ModRM byte.
Fixes: 690ca3a3067f ("x86/insn: Add support for APX EVEX instructions to the opcode map")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v6.10+
Link: https://lore.kernel.org/r/20250423065815.2003231-1-kirill.shutemov@linux.intel.com
|
|
Perf doesn't work at perf stat for hardware events on certain x86 platforms:
$perf stat -- sleep 1
Performance counter stats for 'sleep 1':
16.44 msec task-clock # 0.016 CPUs utilized
2 context-switches # 121.691 /sec
0 cpu-migrations # 0.000 /sec
54 page-faults # 3.286 K/sec
<not supported> cycles
<not supported> instructions
<not supported> branches
<not supported> branch-misses
The reason is that the check in x86_pmu_hw_config() for sampling events is
unexpectedly applied to counting events as well.
It should only impact x86 platforms with limit_period used for non-PEBS
events. For Intel platforms, it should only impact some older platforms,
e.g., HSW, BDW and NHM.
Fixes: 88ec7eedbbd2 ("perf/x86: Fix low freqency setting issue")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250423064724.3716211-1-luogengkun@huaweicloud.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.15, round #2
- Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for everyone's favorite pile
of sand: Cavium ThunderX
|
|
A previous commit added a 'sync' parameter to io_fallback_tw(), which if
true, means the caller wants to wait on the fallback thread handling it.
But the logic is somewhat messed up, ensure that ctxs are swapped and
flushed appropriately.
Cc: stable@vger.kernel.org
Fixes: dfbe5561ae93 ("io_uring: flush offloaded and delayed task_work on exit")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The GNU coreutils version of truncate, which is the original, accepts a
% prefix for the -s size argument which means the file in question
should be padded to a multiple of the given size. This is currently used
to pad the setup block of bzImage to a multiple of 4k before appending
the decompressor.
busybox reimplements truncate but does not support this idiom, and
therefore fails the build since commit
9c54baab4401 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Since very little build code within the kernel depends on the 'truncate'
utility, work around this incompatibility by avoiding truncate altogether,
and relying on dd to perform the padding.
Fixes: 9c54baab4401 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Reported-by: <phasta@kernel.org>
Tested-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250424101917.1552527-2-ardb+git@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"No fixes from any subtree.
Current release - regressions:
- net: fix the missing unlock for detached devices
Previous releases - regressions:
- sched: fix UAF vulnerability in HFSC qdisc
- lwtunnel: disable BHs when required
- mptcp: pm: defer freeing of MPTCP userspace path manager entries
- tipc: fix NULL pointer dereference in tipc_mon_reinit_self()
- eth: virtio-net: disable delayed refill when pausing rx
Previous releases - always broken:
- phylink: fix suspend/resume with WoL enabled and link down
- eth:
- mlx5: fix null-ptr-deref in mlx5_create_{inner_,}ttc_table()
- xen-netfront: handle NULL returned by xdp_convert_buff_to_frame()
- enetc: fix frame corruption on bpf_xdp_adjust_head/tail() and XDP_PASS
- stmmac: fix dwmac1000 ptp timestamp status offset
- pds_core: prevent possible adminq overflow/stuck condition
Misc:
- a bunch of MAINTAINERS updates"
* tag 'net-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits)
net: stmmac: fix multiplication overflow when reading timestamp
net: stmmac: fix dwmac1000 ptp timestamp status offset
net: dp83822: Fix OF_MDIO config check
pds_core: make wait_context part of q_info
pds_core: Remove unnecessary check in pds_client_adminq_cmd()
pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result
pds_core: Prevent possible adminq overflow/stuck condition
net: dsa: mt7530: sync driver-specific behavior of MT7531 variants
selftests/tc-testing: Add test for HFSC queue emptying during peek operation
net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too
net_sched: hfsc: Fix a UAF vulnerability in class handling
selftests: mptcp: diag: use mptcp_lib_get_info_value
mptcp: pm: Defer freeing of MPTCP userspace path manager entries
net: ethernet: mtk_eth_soc: net: revise NETSYSv3 hardware configuration
tipc: fix NULL pointer dereference in tipc_mon_reinit_self()
virtio-net: disable delayed refill when pausing rx
net: phy: leds: fix memory leak
net: phylink: mac_link_(up|down)() clarifications
net: phylink: fix suspend/resume with WoL enabled and link down
net: lwtunnel: disable BHs when required
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Revert acomp multibuffer tests which were buggy
- Fix off-by-one regression in new scomp code
- Lower quality setting on atmel-sha204a as it may not be random
* tag 'v6.15-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: atmel-sha204a - Set hwrng quality to lowest possible
crypto: scomp - Fix off-by-one bug when calculating last page
Revert "crypto: testmgr - Add multibuffer acomp testing"
|
|
Not all VMs allow access to RIP. Check guest_state_protected before
calling kvm_rip_read().
This avoids, for example, hitting WARN_ON_ONCE in vt_cache_reg() for
TDX VMs.
Fixes: 81bf912b2c15 ("KVM: TDX: Implement TDX vcpu enter/exit path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250415104821.247234-3-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Not all VMs allow access to RIP. Check guest_state_protected before
calling kvm_rip_read().
This avoids, for example, hitting WARN_ON_ONCE in vt_cache_reg() for
TDX VMs.
Fixes: 81bf912b2c15 ("KVM: TDX: Implement TDX vcpu enter/exit path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250415104821.247234-2-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that the AMD IOMMU doesn't signal success incorrectly, WARN if KVM
attempts to track an AMD IRTE entry without metadata.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
WARN if KVM attempts to set vCPU affinity when posted interrupts aren't
enabled, as KVM shouldn't try to enable posting when they're unsupported,
and the IOMMU driver darn well should only advertise posting support when
AMD_IOMMU_GUEST_IR_VAPIC() is true.
Note, KVM consumes is_guest_mode only on success.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Return -EINVAL instead of success if amd_ir_set_vcpu_affinity() is
invoked without use_vapic; lying to KVM about whether or not the IRTE was
configured to post IRQs is all kinds of bad.
Fixes: d98de49a53e4 ("iommu/amd: Enable vAPIC interrupt remapping mode by default")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Take irqfds.lock when adding/deleting an IRQ bypass producer to ensure
irqfd->producer isn't modified while kvm_irq_routing_update() is running.
The only lock held when a producer is added/removed is irqbypass's mutex.
Fixes: 872768800652 ("KVM: x86: select IRQ_BYPASS_MANAGER")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly treat type differences as GSI routing changes, as comparing MSI
data between two entries could get a false negative, e.g. if userspace
changed the type but left the type-specific data as-is.
Fixes: 515a0c79e796 ("kvm: irqfd: avoid update unmodified entries of the routing")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Restore an IRTE back to host control (remapped or posted MSI mode) if the
*new* GSI route prevents posting the IRQ directly to a vCPU, regardless of
the GSI routing type. Updating the IRTE if and only if the new GSI is an
MSI results in KVM leaving an IRTE posting to a vCPU.
The dangling IRTE can result in interrupts being incorrectly delivered to
the guest, and in the worst case scenario can result in use-after-free,
e.g. if the VM is torn down, but the underlying host IRQ isn't freed.
Fixes: efc644048ecd ("KVM: x86: Update IRTE for posted-interrupts")
Fixes: 411b44ba80ab ("svm: Implements update_pi_irte hook to setup posted interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allocate SVM's interrupt remapping metadata using GFP_ATOMIC as
svm_ir_list_add() is called with IRQs are disabled and irqfs.lock held
when kvm_irq_routing_update() reacts to GSI routing changes.
Fixes: 411b44ba80ab ("svm: Implements update_pi_irte hook to setup posted interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Skip IRTE updates if AVIC is disabled/unsupported, as forcing the IRTE
into remapped mode (kvm_vcpu_apicv_active() will never be true) is
unnecessary and wasteful. The IOMMU driver is responsible for putting
IRTEs into remapped mode when an IRQ is allocated by a device, long before
that device is assigned to a VM. I.e. the kernel as a whole has major
issues if the IRTE isn't already in remapped mode.
Opportunsitically kvm_arch_has_irq_bypass() to query for APICv/AVIC, so
so that all checks in KVM x86 incorporate the same information.
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401161804.842968-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_arch_has_irq_bypass() is a small function and even though it does
not appear in any *really* hot paths, it's also not entirely rare.
Make it inline---it also works out nicely in preparation for using it in
kvm-intel.ko and kvm-amd.ko, since the function is not currently exported.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Loading a driver just to configure blk-cgroup doesn't make sense, as that
assumes and already existing device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250423053810.1683309-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkdev_get_no_open can trigger the legacy autoload of block drivers. A
simple stat of a block device has not historically done that, so disable
this behavior again.
Fixes: 9abcfbd235f5 ("block: Add atomic write support for statx")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250423053810.1683309-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
backing_inode is only used once, so remove it and update the comment
describing the bdev lookup to be a bit more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250423053810.1683309-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These are only to be used by block internal code. Remove the comment
as we grew more users due to reworking block device node opening.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250423053810.1683309-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the user increased the read-ahead size through sysfs this value
currently get lost if the device is reprobe, including on a resume
from suspend.
As there is no hardware limitation for the read-ahead size there is
no real need to reset it or track a separate hardware limitation
like for max_sectors.
This restores the pre-atomic queue limit behavior in the sd driver as
sd did not use blk_queue_io_opt and thus never updated the read ahead
size to the value based of the optimal I/O, but changes behavior for
all other drivers. As the new behavior seems useful and sd is the
driver for which the readahead size tweaks are most useful that seems
like a worthwhile trade off.
Fixes: 804e498e0496 ("sd: convert to the atomic queue limits API")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250424082521.1967286-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some distributions, such as centos stream 9, still have a version of
coreutils which does not yet support the %Hr and %Lr formats for stat(1)
[1, 2]. Running ublk selftests on these distributions results in the
following error in tests that use the _get_disk_dev_t helper:
line 23: ?r: syntax error: operand expected (error token is "?r")
To better accommodate older distributions, rewrite _get_disk_dev_t to
use the much older %t and %T formats for stat instead.
[1] https://github.com/coreutils/coreutils/blob/v9.0/NEWS#L114
[2] https://pkgs.org/download/coreutils
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250423-ublk_selftests-v1-2-7d060e260e76@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_req_post_cqe() sets submit_state.cq_flush so that
*flush_completions() can take care of batch commiting CQEs. Don't commit
it twice by using __io_cq_unlock_post().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/41c416660c509cee676b6cad96081274bcb459f3.1745493861.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe fix from Christoph:
"nvme fixes for Linux 6.15
- fix an out-of-bounds access in nvmet_enable_port (Richard Weinberger)"
* tag 'nvme-6.15-2025-04-24' of git://git.infradead.org/nvme:
nvmet: fix out-of-bounds access in nvmet_enable_port
|
|
Alexis Lothore says:
====================
net: stmmac: fix timestamp snapshots on dwmac1000
this is the v2 of a small series containing two small fixes for the
timestamp snapshot feature on stmmac, especially on dwmac1000 version.
Those issues have been detected on a socfpga (Cyclone V) platform. They
kind of follow the big rework sent by Maxime at the end of last year to
properly split this feature support between different versions of the
DWMAC IP.
v1: https://lore.kernel.org/r/20250422-stmmac_ts-v1-0-b59c9f406041@bootlin.com
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
====================
Link: https://patch.msgid.link/20250423-stmmac_ts-v2-0-e2cf2bbd61b1@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current way of reading a timestamp snapshot in stmmac can lead to
integer overflow, as the computation is done on 32 bits. The issue has
been observed on a dwmac-socfpga platform returning chaotic timestamp
values due to this overflow. The corresponding multiplication is done
with a MUL instruction, which returns 32 bit values. Explicitly casting
the value to 64 bits replaced the MUL with a UMLAL, which computes and
returns the result on 64 bits, and so returns correctly the timestamps.
Prevent this overflow by explicitly casting the intermediate value to
u64 to make sure that the whole computation is made on u64. While at it,
apply the same cast on the other dwmac variant (GMAC4) method for
snapshot retrieval.
Fixes: 477c3e1f6363 ("net: stmmac: Introduce dwmac1000 timestamping operations")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250423-stmmac_ts-v2-2-e2cf2bbd61b1@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a PTP interrupt occurs, the driver accesses the wrong offset to
learn about the number of available snapshots in the FIFO for dwmac1000:
it should be accessing bits 29..25, while it is currently reading bits
19..16 (those are bits about the auxiliary triggers which have generated
the timestamps). As a consequence, it does not compute correctly the
number of available snapshots, and so possibly do not generate the
corresponding clock events if the bogus value ends up being 0.
Fix clock events generation by reading the correct bits in the timestamp
register for dwmac1000.
Fixes: 477c3e1f6363 ("net: stmmac: Introduce dwmac1000 timestamping operations")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250423-stmmac_ts-v2-1-e2cf2bbd61b1@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When CONFIG_OF_MDIO is set to be a module the code block is not
compiled. Use the IS_ENABLED macro that checks for both built in as
well as module.
Fixes: 5dc39fd5ef35 ("net: phy: DP83822: Add ability to advertise Fiber connection")
Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250423044724.1284492-1-johannes.schneider@leica-geosystems.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Shannon Nelson says:
====================
pds_core: updates and fixes
This patchset has fixes for issues seen in recent internal testing
of error conditions and stress handling.
Note that the first patch in this series is a leftover from an
earlier patchset that was abandoned:
Link: https://lore.kernel.org/netdev/20250129004337.36898-2-shannon.nelson@amd.com/
====================
Link: https://patch.msgid.link/20250421174606.3892-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make the wait_context a full part of the q_info struct rather
than a stack variable that goes away after pdsc_adminq_post()
is done so that the context is still available after the wait
loop has given up.
There was a case where a slow development firmware caused
the adminq request to time out, but then later the FW finally
finished the request and sent the interrupt. The handler tried
to complete_all() the completion context that had been created
on the stack in pdsc_adminq_post() but no longer existed.
This caused bad pointer usage, kernel crashes, and much wailing
and gnashing of teeth.
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-5-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the pds_core driver was first created there were some race
conditions around using the adminq, especially for client drivers.
To reduce the possibility of a race condition there's a check
against pf->state in pds_client_adminq_cmd(). This is problematic
for a couple of reasons:
1. The PDSC_S_INITING_DRIVER bit is set during probe, but not
cleared until after everything in probe is complete, which
includes creating the auxiliary devices. For pds_fwctl this
means it can't make any adminq commands until after pds_core's
probe is complete even though the adminq is fully up by the
time pds_fwctl's auxiliary device is created.
2. The race conditions around using the adminq have been fixed
and this path is already protected against client drivers
calling pds_client_adminq_cmd() if the adminq isn't ready,
i.e. see pdsc_adminq_post() -> pdsc_adminq_inc_if_up().
Fix this by removing the pf->state check in pds_client_adminq_cmd()
because invalid accesses to pds_core's adminq is already handled by
pdsc_adminq_post()->pdsc_adminq_inc_if_up().
Fixes: 10659034c622 ("pds_core: add the aux client API")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command
the driver might at the least print garbage and at the worst
crash when the user runs the "devlink dev info" devlink command.
This happens because the stack variable fw_list is not 0
initialized which results in fw_list.num_fw_slots being a
garbage value from the stack. Then the driver tries to access
fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end
of the array.
Fix this by initializing the fw_list and by not failing
completely if the devcmd fails because other useful information
is printed via devlink dev info even if the devcmd fails.
Fixes: 45d76f492938 ("pds_core: set up device and adminq")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pds_core's adminq is protected by the adminq_lock, which prevents
more than 1 command to be posted onto it at any one time. This makes it
so the client drivers cannot simultaneously post adminq commands.
However, the completions happen in a different context, which means
multiple adminq commands can be posted sequentially and all waiting
on completion.
On the FW side, the backing adminq request queue is only 16 entries
long and the retry mechanism and/or overflow/stuck prevention is
lacking. This can cause the adminq to get stuck, so commands are no
longer processed and completions are no longer sent by the FW.
As an initial fix, prevent more than 16 outstanding adminq commands so
there's no way to cause the adminq from getting stuck. This works
because the backing adminq request queue will never have more than 16
pending adminq commands, so it will never overflow. This is done by
reducing the adminq depth to 16.
Fixes: 45d76f492938 ("pds_core: set up device and adminq")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250421174606.3892-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
