| Age | Commit message (Collapse) | Author |
|---|
|
Pull block fix from Jens Axboe:
"Fix for a single regression for WRITE_SAME introduced in the 6.11
merge window"
* tag 'block-6.11-20240830' of git://git.kernel.dk/linux:
block: fix detection of unsupported WRITE SAME in blkdev_issue_write_zeroes
|
|
Pull io_uring fixes from Jens Axboe:
- A fix for a regression that happened in 6.11 merge window, where the
copying of iovecs for compat mode applications got broken for certain
cases.
- Fix for a bug introduced in 6.10, where if using recv/send bundles
with classic provided buffers, the recv/send would fail to set the
right iovec count. This caused 0 byte send/recv results. Found via
code coverage testing and writing a test case to exercise it.
* tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux:
io_uring/kbuf: return correct iovec count from classic buffer peek
io_uring/rsrc: ensure compat iovecs are copied correctly
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
Microchip AT91 fixes for v6.11
It contains:
- DTS directory update to match all entries not only those starting with
at91 or sama
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"One small patch to correct a NFS permissions problem with SELinux and
Smack"
* tag 'lsm-pr-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
selinux,smack: don't bypass permissions check in inode_setsecctx hook
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the amd-pstate cpufreq driver.
Specifics:
- Remove checks for highest performance match on preferred cores when
updating preferred core ranking in amd-pstate (Mario Limonciello)
- Make amd-pstate call topology_logical_package_id() instead of
logical_die_id() to get a socked ID for a CPU (Gautham Shenoy)
- Fix uninitialized variable in amd_pstate_cpu_boost_update() (Dan
Carpenter)"
* tag 'pm-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore
cpufreq/amd-pstate: Use topology_logical_package_id() instead of logical_die_id()
cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- A bunch of dw driver changes to fix the src/dst addr width config
- Omap driver fix for sglen initialization
- stm32-dma3 driver lli_size init fix
- dw edma driver fixes for watermark interrupts and unmasking STOP and
ABORT interrupts
* tag 'dmaengine-fix-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: dw-edma: Do not enable watermark interrupts for HDMA
dmaengine: dw-edma: Fix unmasking STOP and ABORT interrupts for HDMA
dmaengine: stm32-dma3: Set lli_size after allocation
dmaengine: ti: omap-dma: Initialize sglen after allocation
dmaengine: dw: Unify ret-val local variables naming
dmaengine: dw: Simplify max-burst calculation procedure
dmaengine: dw: Define encode_maxburst() above prepare_ctllo() callbacks
dmaengine: dw: Simplify prepare CTL_LO methods
dmaengine: dw: Add memory bus width verification
dmaengine: dw: Add peripheral bus width verification
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm QMP X1E80100 PCIe Gen4 PHY initialisation fix
- Freescale imx8mq tuning parameter name fix
- Samsung exynos5 fir for error code in probe()
- Xilinx Zynqmp SGMII linkup failure fix
* tag 'phy-fixes-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume
phy: exynos5-usbdrd: fix error code in probe()
phy: fsl-imx8mq-usb: fix tuning parameter name
phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single fix for non-continous port map programming
* tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: fix programming slave ports for non-continous port maps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
|
|
Add imx mailing list imx@lists.linux.dev for PCI controller of NXP chips
(Layerscape and iMX).
Link: https://lore.kernel.org/r/20240826202740.970015-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
|
|
io_provided_buffers_select() returns 0 to indicate success, but it should
be returning 1 to indicate that 1 vec was mapped. This causes peeking
to fail with classic provided buffers, and while that's not a use case
that anyone should use, it should still work correctly.
The end result is that no buffer will be selected, and hence a completion
with '0' as the result will be posted, without a buffer attached.
Fixes: 35c8711c8fc4 ("io_uring/kbuf: add helpers for getting/peeking multiple buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is not safe to dereference fl->c.flc_owner without first confirming
fl->fl_lmops is the expected manager. nfsd4_deleg_getattr_conflict()
tests fl_lmops but largely ignores the result and assumes that flc_owner
is an nfs4_delegation anyway. This is wrong.
With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave
as it did before the change mentioned below. This is the same as the
current code, but without any reference to a possible delegation.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
For buffer registration (or updates), a userspace iovec is copied in
and updated. If the application is within a compat syscall, then the
iovec type is compat_iovec rather than iovec. However, the type used
in __io_sqe_buffers_update() and io_sqe_buffers_register() is always
struct iovec, and hence the source is incremented by the size of a
non-compat iovec in the loop. This misses every other iovec in the
source, and will run into garbage half way through the copies and
return -EFAULT to the application.
Maintain the source address separately and assign to our user vec
pointer, so that copies always happen from the right source address.
While in there, correct a bad placement of __user which triggered
the following sparse warning prior to this fix:
io_uring/rsrc.c:981:33: warning: cast removes address space '__user' of expression
io_uring/rsrc.c:981:30: warning: incorrect type in assignment (different address spaces)
io_uring/rsrc.c:981:30: expected struct iovec const [noderef] __user *uvec
io_uring/rsrc.c:981:30: got struct iovec *[noderef] __user
Fixes: f4eaf8eda89e ("io_uring/rsrc: Drop io_copy_iov in favor of iovec API")
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device id for 6.11-rc6
Here's a new modem device id.
This one has been in linux-next with no reported issues.
* tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add MeiG Smart SRM825L
|
|
Pull drm fixes from Dave Airlie:
"Another week, another set of GPU fixes. amdgpu and vmwgfx leading the
charge, then i915 and xe changes along with v3d and some other bits.
The TTM revert is due to some stuttering graphical apps probably due
to longer stalls while prefaulting.
Seems pretty much where I'd expect things,
ttm:
- revert prefault change, caused stutters
aperture:
- handle non-VGA devices bettter
amdgpu:
- SWSMU gaming stability fix
- SMU 13.0.7 fix
- SWSMU documentation alignment fix
- SMU 14.0.x fixes
- GC 12.x fix
- Display fix
- IP discovery fix
- SMU 13.0.6 fix
i915:
- Fix #11195: The external display connect via USB type-C dock stays
blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
- Move ARL GuC firmware to correct version
xe:
- Invalidate media_gt TLBs
- Fix HWMON i1 power setup write command
vmwgfx:
- prevent unmapping active read buffers
- fix prime with external buffers
- disable coherent dumb buffers without 3d
v3d:
- disable preemption while updating GPU stats"
* tag 'drm-fixes-2024-08-30' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16
drm/v3d: Disable preemption while updating GPU stats
drm/amd/pm: Drop unsupported features on smu v14_0_2
drm/amd/pm: Add support for new P2S table revision
drm/amdgpu: support for gc_info table v1.3
drm/amd/display: avoid using null object of framebuffer
drm/amdgpu/gfx12: set UNORD_DISPATCH in compute MQDs
drm/amd/pm: update message interface for smu v14.0.2/3
drm/amdgpu/swsmu: always force a state reprogram on init
drm/amdgpu/smu13.0.7: print index for profiles
drm/amdgpu: align pp_power_profile_mode with kernel docs
drm/i915/dp_mst: Fix MST state after a sink reset
drm/xe: Invalidate media_gt TLBs
drm/i915: ARL requires a newer GSC firmware
drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
video/aperture: optionally match the device in sysfb_disable()
drm/vmwgfx: Disable coherent dumb buffers without 3d
drm/vmwgfx: Fix prime with external buffers
drm/vmwgfx: Prevent unmapping active read buffers
Revert "drm/ttm: increase ttm pre-fault value to PMD size"
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A revert for a previous TTM commit causing stuttering, 3 fixes for
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829-efficient-swift-from-lemuria-f60c05@houat
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Invalidate media_gt TLBs (Brost)
- Fix HWMON i1 power setup write command (Karthik)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtB-t5f4uXMrKgnV@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fix from Kees Cook:
- binfmt_elf_fdpic: fix AUXV size with ELF_HWCAP2 (Max Filippov)
* tag 'execve-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf_fdpic: fix AUXV size calculation when ELF_HWCAP2 is defined
|
|
The runtime constant feature removes all the users of these variables,
allowing the compiler to optimize them away. It's quite difficult to
extract their values from the kernel text, and the memory saved by
removing them is tiny, and it was never the point of this optimization.
Since the dentry_hashtable is a core data structure, it's valuable for
debugging tools to be able to read it easily. For instance, scripts
built on drgn, like the dentrycache script[1], rely on it to be able to
perform diagnostics on the contents of the dcache. Annotate it as used,
so the compiler doesn't discard it.
Link: https://github.com/oracle-samples/drgn-tools/blob/3afc56146f54d09dfd1f6d3c1b7436eda7e638be/drgn_tools/dentry.py#L325-L355 [1]
Fixes: e3c92e81711d ("runtime constants: add x86 architecture support")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix #11195: The external display connect via USB type-C dock stays blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
. Move ARL GuC firmware to correct version
-
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtAd8WTw1xiSu_TS@jlahtine-mobl.ger.corp.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- pt5161l: Fix invalid temperature reading of bad ADC values
- asus-ec-sensors: Remove unsupported VRM temperature from X570-E
GAMING
* tag 'hwmon-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pt5161l) Fix invalid temperature reading
hwmon: (asus-ec-sensors) remove VRM temp X570-E GAMING
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, wireless and netfilter.
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code"
* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
nfc: pn533: Add poll mod list filling check
mailmap: update entry for Sriram Yagnaraman
selftests: mptcp: join: check re-re-adding ID 0 signal
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: validate event numbers
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: pm: fix ID 0 endp usage after multiple re-creations
mptcp: pm: do not remove already closed subflows
selftests: mptcp: join: no extra msg if no counter
selftests: mptcp: join: check re-adding init endp with != id
mptcp: pm: reset MPC endp ID when re-added
mptcp: pm: skip connecting to already established sf
mptcp: pm: send ACK on an active subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: fix RM_ADDR ID for the initial subflow
mptcp: pm: reuse ID 0 after delete and re-add
net: busy-poll: use ktime_get_ns() instead of local_clock()
sctp: fix association labeling in the duplicate COOKIE-ECHO case
mptcp: pr_debug: add missing \n at the end
...
|
|
Commit 8bccf667f62a ("Input: cypress_ps2 - report timeouts when reading
command status") uncovered an existing problem with cypress_ps2 driver:
it tries waiting on a PS/2 device waitqueue without using the rest of
libps2. Unfortunately without it nobody signals wakeup for the
waiting process, and each "extended" command was timing out. But the
rest of the code simply did not notice it.
Fix this by switching from homegrown way of sending request to get
command response and reading it to standard ps2_command() which does
the right thing.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Fixes: 8bccf667f62a ("Input: cypress_ps2 - report timeouts when reading command status")
Link: https://lore.kernel.org/r/a8252e0f-dab4-ef5e-2aa1-407a6f4c7204@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
WRITE_I1 sub-command of the POWER_SETUP pcode command accepts a u16
parameter instead of u32. This change prevents potential illegal
sub-command errors.
v2: Mask uval instead of changing the prototype. (Badal)
v3: Rephrase commit message. (Badal)
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 92d44a422d0d ("drm/xe/hwmon: Expose card reactive critical power")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827155301.183383-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a7f657097e96d8fa745c74bb1a239ebd5a8c971c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.
Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
nfc_start_poll()
->start_poll()
pn533_start_poll()
Add poll mod list filling check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes
payload from netdev/egress by subtracting skb_network_offset() when
validating IPv4 packet length, otherwise 'meta l4proto udp' never
matches.
Patch #2 subtracts skb_network_offset() when validating IPv6 packet
length for netdev/egress.
netfilter pull request 24-08-28
* tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation
netfilter: nf_tables: restore IP sanity checks for netdev/egress
====================
Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Link my old est.tech address to my active mail address
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/20240828072417.4111996-1-sriram.yagnaraman@ericsson.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Matthieu Baerts says:
====================
mptcp: more fixes for the in-kernel PM
Here is a new batch of fixes for the MPTCP in-kernel path-manager:
Patch 1 ensures the address ID is set to 0 when the path-manager sends
an ADD_ADDR for the address of the initial subflow. The same fix is
applied when a new subflow is created re-using this special address. A
fix for v6.0.
Patch 2 is similar, but for the case where an endpoint is removed: if
this endpoint was used for the initial address, it is important to send
a RM_ADDR with this ID set to 0, and look for existing subflows with the
ID set to 0. A fix for v6.0 as well.
Patch 3 validates the two previous patches.
Patch 4 makes the PM selecting an "active" path to send an address
notification in an ACK, instead of taking the first path in the list. A
fix for v5.11.
Patch 5 fixes skipping the establishment of a new subflow if a previous
subflow using the same pair of addresses is being closed. A fix for
v5.13.
Patch 6 resets the ID linked to the initial subflow when the linked
endpoint is re-added, possibly with a different ID. A fix for v6.0.
Patch 7 validates the three previous patches.
Patch 8 is a small fix for the MPTCP Join selftest, when being used with
older subflows not supporting all MIB counters. A fix for a commit
introduced in v6.4, but backported up to v5.10.
Patch 9 avoids the PM to try to close the initial subflow multiple
times, and increment counters while nothing happened. A fix for v5.10.
Patch 10 stops incrementing local_addr_used and add_addr_accepted
counters when dealing with the address ID 0, because these counters are
not taking into account the initial subflow, and are then not
decremented when the linked addresses are removed. A fix for v6.0.
Patch 11 validates the previous patch.
Patch 12 avoids the PM to send multiple SUB_CLOSED events for the
initial subflow. A fix for v5.12.
Patch 13 validates the previous patch.
Patch 14 stops treating the ADD_ADDR 0 as a new address, and accepts it
in order to re-create the initial subflow if it has been closed, even if
the limit for *new* addresses -- not taking into account the address of
the initial subflow -- has been reached. A fix for v5.10.
Patch 15 validates the previous patch.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
---
Matthieu Baerts (NGI0) (15):
mptcp: pm: reuse ID 0 after delete and re-add
mptcp: pm: fix RM_ADDR ID for the initial subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: send ACK on an active subflow
mptcp: pm: skip connecting to already established sf
mptcp: pm: reset MPC endp ID when re-added
selftests: mptcp: join: check re-adding init endp with != id
selftests: mptcp: join: no extra msg if no counter
mptcp: pm: do not remove already closed subflows
mptcp: pm: fix ID 0 endp usage after multiple re-creations
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: validate event numbers
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: check re-re-adding ID 0 signal
net/mptcp/pm.c | 4 +-
net/mptcp/pm_netlink.c | 87 ++++++++++----
net/mptcp/protocol.c | 6 +
net/mptcp/protocol.h | 5 +-
tools/testing/selftests/net/mptcp/mptcp_join.sh | 153 ++++++++++++++++++++----
tools/testing/selftests/net/mptcp/mptcp_lib.sh | 4 +
6 files changed, 209 insertions(+), 50 deletions(-)
---
base-commit: 3a0504d54b3b57f0d7bf3d9184a00c9f8887f6d7
change-id: 20240826-net-mptcp-more-pm-fix-ffa61a36f817
Best regards,
====================
Link: https://patch.msgid.link/20240828-net-mptcp-more-pm-fix-v2-0-7f11b283fff7@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test extends "delete re-add signal" to validate the previous
commit: when the 'signal' endpoint linked to the initial subflow (ID 0)
is re-added multiple times, it will re-send the ADD_ADDR with id 0. The
client should still be able to re-create this subflow, even if the
add_addr_accepted limit has been reached as this special address is not
considered as a new address.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ADD_ADDR 0 with the address from the initial subflow should not be
considered as a new address: this is not something new. If the host
receives it, it simply means that the address is available again.
When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider
it as new by not incrementing the 'add_addr_accepted' counter. But the
'accept_addr' might not be set if the limit has already been reached:
this can be bypassed in this case. But before, it is important to check
that this ADD_ADDR for the ID 0 is for the same address as the initial
subflow. If not, it is not something that should happen, and the
ADD_ADDR can be ignored.
Note that if an ADD_ADDR is received while there is already a subflow
opened using the same address, this ADD_ADDR is ignored as well. It
means that if multiple ADD_ADDR for ID 0 are received, there will not be
any duplicated subflows created by the client.
Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test extends "delete and re-add" and "delete re-add signal" to
validate the previous commit: the number of MPTCP events are checked to
make sure there are no duplicated or unexpected ones.
A new helper has been introduced to easily check these events. The
missing events have been added to the lib.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b911c97c7dc7 ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The initial subflow might have already been closed, but still in the
connection list. When the worker is instructed to close the subflows
that have been marked as closed, it might then try to close the initial
subflow again.
A consequence of that is that the SUB_CLOSED event can be seen twice:
# ip mptcp endpoint
1.1.1.1 id 1 subflow dev eth0
2.2.2.2 id 2 subflow dev eth1
# ip mptcp monitor &
[ CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9
# ip mptcp endpoint delete id 1
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the
second one from __mptcp_close_subflow().
To avoid doing the post-closed processing twice, the subflow is now
marked as closed the first time.
Note that it is not enough to check if we are dealing with the first
subflow and check its sk_state: the subflow might have been reset or
closed before calling mptcp_close_ssk().
Fixes: b911c97c7dc7 ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test extends "delete and re-add" to validate the previous commit:
when the endpoint linked to the initial subflow (ID 0) is re-added
multiple times, it was no longer being used, because the internal linked
counters are not decremented for this special endpoint: it is not an
additional endpoint.
Here, the "del/add id 0" steps are done 3 times to unsure this case is
validated.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
'local_addr_used' and 'add_addr_accepted' are decremented for addresses
not related to the initial subflow (ID0), because the source and
destination addresses of the initial subflows are known from the
beginning: they don't count as "additional local address being used" or
"ADD_ADDR being accepted".
It is then required not to increment them when the entrypoint used by
the initial subflow is removed and re-added during a connection. Without
this modification, this entrypoint cannot be removed and re-added more
than once.
Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/512
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Reported-by: syzbot+455d38ecd5f655fc45cf@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/00000000000049861306209237f4@google.com
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It is possible to have in the list already closed subflows, e.g. the
initial subflow has been already closed, but still in the list. No need
to try to close it again, and increments the related counters again.
Fixes: 0ee4261a3681 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The checksum and fail counters might not be available. Then no need to
display an extra message with missing info.
While at it, fix the indentation around, which is wrong since the same
commit.
Fixes: 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID, but the kernel should still use the ID 0 if it corresponds
to the initial address.
This test validates this behaviour: the endpoint linked to the initial
subflow is removed, and re-added with a different ID.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID -- most services managing the endpoints automatically don't
force the ID to be the same as before. It is then important to track
these modifications to be consistent with the ID being used for the
address used by the initial subflow, not to confuse the other peer or to
send the ID 0 for the wrong address.
Now when removing an endpoint, msk->mpc_endpoint_id is reset if it
corresponds to this endpoint. When adding a new endpoint, the same
variable is updated if the address match the one of the initial subflow.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The lookup_subflow_by_daddr() helper checks if there is already a
subflow connected to this address. But there could be a subflow that is
closing, but taking time due to some reasons: latency, losses, data to
process, etc.
If an ADD_ADDR is received while the endpoint is being closed, it is
better to try connecting to it, instead of rejecting it: the peer which
has sent the ADD_ADDR will not be notified that the ADD_ADDR has been
rejected for this reason, and the expected subflow will not be created
at the end.
This helper should then only look for subflows that are established, or
going to be, but not the ones being closed.
Fixes: d84ad04941c3 ("mptcp: skip connecting the connected address")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Taking the first one on the list doesn't work in some cases, e.g. if the
initial subflow is being removed. Pick another one instead of not
sending anything.
Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Removing the endpoint linked to the initial subflow should trigger a
RM_ADDR for the right ID, and the removal of the subflow. That's what is
now being verified in the "delete and re-add" test.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The initial subflow has a special local ID: 0. When an endpoint is being
deleted, it is then important to check if its address is not linked to
the initial subflow to send the right ID.
If there was an endpoint linked to the initial subflow, msk's
mpc_endpoint_id field will be set. We can then use this info when an
endpoint is being removed to see if it is linked to the initial subflow.
So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(),
it is no longer needed to use mptcp_local_id_match().
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the endpoint used by the initial subflow is removed and re-added
later, the PM has to force the ID 0, it is a special case imposed by the
MPTCP specs.
Note that the endpoint should then need to be re-added reusing the same
ID.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.11-2024-08-28:
amdgpu:
- SWSMU gaming stability fix
- SMU 13.0.7 fix
- SWSMU documentation alignment fix
- SMU 14.0.x fixes
- GC 12.x fix
- Display fix
- IP discovery fix
- SMU 13.0.6 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828184908.125387-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fix from Jason Donenfeld:
"Reject invalid flags passed to vgetrandom() in the same way that
getrandom() does, so that the behavior is the same, from Yann.
The flags argument to getrandom() only has a behavioral effect on the
function if the RNG isn't initialized yet, so vgetrandom() falls back
to the syscall in that case. But if the RNG is initialized, all of the
flags behave the same way, so vgetrandom() didn't bother checking
them, and just ignored them entirely.
But that doesn't account for invalid flags passed in, which need to be
rejected so we can use them later"
* tag 'random-6.11-rc6-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: vDSO: reject unknown getrandom() flags
|
|
Typically, busy-polling durations are below 100 usec.
When/if the busy-poller thread migrates to another cpu,
local_clock() can be off by +/-2msec or more for small
values of HZ, depending on the platform.
Use ktimer_get_ns() to ensure deterministic behavior,
which is the whole point of busy-polling.
Fixes: 060212928670 ("net: add low latency socket poll")
Fixes: 9a3c71aa8024 ("net: convert low latency sockets to sched_clock()")
Fixes: 37089834528b ("sched, net: Fixup busy_loop_us_clock()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240827114916.223377-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Regressions:
* wfx: fix for open network connection
* iwlwifi: fix for hibernate (due to fast resume feature)
* iwlwifi: fix for a few warnings that were recently added
(had previously been messages not warnings)
Previously broken:
* mwifiex: fix static structures used for per-device data
* iwlwifi: some harmless FW related messages were tagged
too high priority
* iwlwifi: scan buffers weren't checked correctly
* mac80211: SKB leak on beacon error path
* iwlwifi: fix ACPI table interop with certain BIOSes
* iwlwifi: fix locking for link selection
* mac80211: fix SSID comparison in beacon validation
* tag 'wireless-2024-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: clear trans->state earlier upon error
wifi: wfx: repair open network AP mode
wifi: mac80211: free skb on error path in ieee80211_beacon_get_ap()
wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead
wifi: iwlwifi: mvm: allow 6 GHz channels in MLO scan
wifi: iwlwifi: mvm: pause TCM when the firmware is stopped
wifi: iwlwifi: fw: fix wgds rev 3 exact size
wifi: iwlwifi: mvm: take the mutex before running link selection
wifi: iwlwifi: mvm: fix iwl_mvm_max_scan_ie_fw_cmd_room()
wifi: iwlwifi: mvm: fix iwl_mvm_scan_fits() calculation
wifi: iwlwifi: lower message level for FW buffer destination
wifi: iwlwifi: mvm: fix hibernation
wifi: mac80211: fix beacon SSID mismatch handling
wifi: mwifiex: duplicate static structs used in driver instances
====================
Link: https://patch.msgid.link/20240828100151.23662-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Marek Gresko reports that the root user on an NFS client is able to
change the security labels on files on an NFS filesystem that is
exported with root squashing enabled.
The end of the kerneldoc comment for __vfs_setxattr_noperm() states:
* This function requires the caller to lock the inode's i_mutex before it
* is executed. It also assumes that the caller will make the appropriate
* permission checks.
nfsd_setattr() does do permissions checking via fh_verify() and
nfsd_permission(), but those don't do all the same permissions checks
that are done by security_inode_setxattr() and its related LSM hooks do.
Since nfsd_setattr() is the only consumer of security_inode_setsecctx(),
simplest solution appears to be to replace the call to
__vfs_setxattr_noperm() with a call to __vfs_setxattr_locked(). This
fixes the above issue and has the added benefit of causing nfsd to
recall conflicting delegations on a file when a client tries to change
its security label.
Cc: stable@kernel.org
Reported-by: Marek Gresko <marek.gresko@protonmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218809
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Under certain conditions, the range to be cleared by FALLOC_FL_ZERO_RANGE
may only be buffered locally and not yet have been flushed to the server.
For example:
xfs_io -f -t -c "pwrite -S 0x41 0 4k" \
-c "pwrite -S 0x42 4k 4k" \
-c "fzero 0 4k" \
-c "pread -v 0 8k" /xfstest.test/foo
will write two 4KiB blocks of data, which get buffered in the pagecache,
and then fallocate() is used to clear the first 4KiB block on the server -
but we don't flush the data first, which means the EOF position on the
server is wrong, and so the FSCTL_SET_ZERO_DATA RPC fails (and xfs_io
ignores the error), but then when we try to read it, we see the old data.
Fix this by preflushing any part of the target region that above the
server's idea of the EOF position to force the server to update its EOF
position.
Note, however, that we don't want to simply expand the file by moving the
EOF before doing the FSCTL_SET_ZERO_DATA[*] because someone else might see
the zeroed region or if the RPC fails we then have to try to clean it up or
risk getting corruption.
[*] And we have to move the EOF first otherwise FSCTL_SET_ZERO_DATA won't
do what we want.
This fixes the generic/008 xfstest.
[!] Note: A better way to do this might be to split the operation into two
parts: we only do FSCTL_SET_ZERO_DATA for the part of the range below the
server's EOF and then, if that worked, invalidate the buffered pages for the
part above the range.
Fixes: 6b69040247e1 ("cifs/smb3: Fix data inconsistent when zero file range")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
cc: Pavel Shilovsky <pshilov@microsoft.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc fixes for v6.11-rc6
Prevent an erroneous unconditional report of a timeout during firmware
upload in the mpfs-auto-update driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.11-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix incorrect error report of programming:timeout on success
Link: https://lore.kernel.org/r/20240828-fidelity-almighty-18d5434aaef0@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
