| Age | Commit message (Collapse) | Author |
|---|
|
when 'act_mpls' is used to mangle the LSE, the current value is read from
the packet dereferencing 4 bytes at mpls_hdr(): ensure that the label is
contained in the skb "linear" area.
Found by code inspection.
v2:
- use MPLS_HLEN instead of sizeof(new_lse), thanks to Jakub Kicinski
Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/3243506cba43d14858f3bd21ee0994160e44d64a.1606987058.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
when openvswitch is configured to mangle the LSE, the current value is
read from the packet dereferencing 4 bytes at mpls_hdr(): ensure that
the label is contained in the skb "linear" area.
Found by code inspection.
Fixes: d27cf5c59a12 ("net: core: add MPLS update core helper and use in OvS")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/aa099f245d93218b84b5c056b67b6058ccf81a66.1606987185.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_mpls_dec_ttl() reads the LSE without ensuring that it is contained in
the skb "linear" area. Fix this calling pskb_may_pull() before reading the
current ttl.
Found by code inspection.
Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/53659f28be8bc336c113b5254dc637cc76bbae91.1606987074.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.10
Second, and most likely final, set of fixes for v5.10. Small fixes and
PCI id addtions.
iwlwifi
* PCI id additions
mt76
* fix a kernel crash during device removal
rtw88
* fix uninitialized memory in debugfs code
* tag 'wireless-drivers-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers:
rtw88: debug: Fix uninitialized memory in debugfs code
mt76: usb: fix crash on device removal
iwlwifi: pcie: add some missing entries for AX210
iwlwifi: pcie: invert values of NO_160 device config entries
iwlwifi: pcie: add one missing entry for AX210
iwlwifi: update MAINTAINERS entry
====================
Link: https://lore.kernel.org/r/20201203183408.EE88AC43461@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix to return negative error code -ENOENT from invalid configuration
error handling case instead of 0, as done elsewhere in this function.
Fixes: 4bb043262878 ("net: mvpp2: phylink support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201203141806.37966-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "skb" is freed by the transmit code in cxgb4_ofld_send() and we
shouldn't use it again. But in the current code, if we hit an error
later on in the function then the clean up code will call kfree_skb(skb)
and so it causes a double free.
Set the "skb" to NULL and that makes the kfree_skb() a no-op.
Fixes: d25f2f71f653 ("crypto: chtls - Program the TLS session Key")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X8ilb6PtBRLWiSHp@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
STATX_ATTR_MOUNT_ROOT and STATX_ATTR_DAX got merged with the same value,
so one of them needs fixing. Move STATX_ATTR_DAX.
While we're in here, clarify the value-matching scheme for some of the
attributes, and explain why the value for DAX does not match.
Fixes: 80340fe3605c ("statx: add mount_root")
Fixes: 712b2698e4c0 ("fs/stat: Define DAX statx attribute")
Link: https://lore.kernel.org/linux-fsdevel/7027520f-7c79-087e-1d00-743bdefa1a1e@redhat.com/
Link: https://lore.kernel.org/lkml/20201202214629.1563760-1-ira.weiny@intel.com/
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: <stable@vger.kernel.org> # 5.8
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently .get_state() and .apply() use dev_get_drvdata() on the struct
device related to the pwm chip. This only works after .probe() called
platform_set_drvdata() which in this driver happens only after
pwmchip_add() and so comes possibly too late.
Instead of setting the driver data earlier use the traditional
container_of approach as this way the driver data is conceptually and
computational nearer.
Fixes: 9db33d221efc ("pwm: Add support for sl28cpld PWM controller")
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Lilith >_> and Claudio Bozzato of Cisco Talos security team reported
that collect_syscall() improperly casts the syscall registers to 64-bit
values leaking the uninitialized last 24 bytes on 32-bit platforms, that
are visible in /proc/self/syscall.
The cause is that info->data.args are u64 while syscall_get_arguments()
uses longs, as hinted by the bogus pointer cast in the function.
Let's just proceed like the other call places, by retrieving the
registers into an array of longs before assigning them to the caller's
array. This was successfully tested on x86_64, i386 and ppc32.
Reference: CVE-2020-28588, TALOS-2020-1211
Fixes: 631b7abacd02 ("ptrace: Remove maxargs from task_current_syscall()")
Cc: Greg KH <greg@kroah.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (ppc32)
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, UV4 is incorrectly identified as UV4A and UV4A as UV5. Hub
chip starts with revision 1, fix it.
[ bp: Massage commit message. ]
Fixes: 647128f1536e ("x86/platform/uv: Update UV MMRs for UV5")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Link: https://lkml.kernel.org/r/20201203152252.371199-1-mike.travis@hpe.com
|
|
This code does not ensure that the whole buffer is initialized and none
of the callers check for errors so potentially none of the buffer is
initialized. Add a memset to eliminate this bug.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/X8ilOfVz3pf0T5ec@mwanda
|
|
Keep the device-id entries sorted to make it easier to add new ones in
the right spot.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add PID for CH340 that's found on a ch341 based Programmer made by keeyees.
The specific device that contains the serial converter is described
here: http://www.keeyees.com/a/Products/ej/36.html
The driver works flawlessly as soon as the new PID (0x5512) is added to
it.
Signed-off-by: Jan-Niklas Burfeind <kernel@aiyionpri.me>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The kernel cannot disambiguate when 2+ PEBS counters overflow at the
same time. This is what the comment for this code suggests. However,
I see the comparison is done with the unfiltered p->status which is a
copy of IA32_PERF_GLOBAL_STATUS at the time of the sample. This
register contains more than the PEBS counter overflow bits. It also
includes many other bits which could also be set.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201126110922.317681-2-namhyung@kernel.org
|
|
The commit 3966c3feca3f ("x86/perf/amd: Remove need to check "running"
bit in NMI handler") introduced this. It seems x86_pmu_stop can be
called recursively (like when it losts some samples) like below:
x86_pmu_stop
intel_pmu_disable_event (x86_pmu_disable)
intel_pmu_pebs_disable
intel_pmu_drain_pebs_nhm (x86_pmu_drain_pebs_buffer)
x86_pmu_stop
While commit 35d1ce6bec13 ("perf/x86/intel/ds: Fix x86_pmu_stop
warning for large PEBS") fixed it for the normal cases, there's
another path to call x86_pmu_stop() recursively when a PEBS error was
detected (like two or more counters overflowed at the same time).
Like in the Kan's previous fix, we can skip the interrupt accounting
for large PEBS, so check the iregs which is set for PMI only.
Fixes: 3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler")
Reported-by: John Sperbeck <jsperbeck@google.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201126110922.317681-1-namhyung@kernel.org
|
|
Because CONFIG_ soup.
Fixes: 6e1d2bc675bd ("intel_idle: Fix intel_idle() vs tracing")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201130115402.GO3040@hirez.programming.kicks-ass.net
|
|
Port from VCN2.5
SCRATCH2 is used to keep decode wptr as a workaround
which fix a hardware DPG decode wptr update bug for
vcn2.5 beforehand.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
|
|
Port from VCN2.5
Add vcn dpg harware synchronization to fix race condition
issue between vcn driver and hardware.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
|
|
[Why]
While booting into OS, driver updates DPP/DISP CLKs.
But init clock value is zero which is invalid.
[How]
Get current clocks value to update init clocks.
To avoid underflow.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix fan set speed calculation.
Suggested-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1606903122-2098-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 72b05b9940f0 ("pasemi_mac: RX/TX ring management cleanup")
Fixes: 8d636d8bc5ff ("pasemi_mac: jumbo frame support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1606903035-1838-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: b1fb1f280d09 ("cxgb3 - Fix dma mapping error path")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Raju Rangoju <rajur@chelsio.com>
Link: https://lore.kernel.org/r/1606902965-1646-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ssh://git.freedesktop.org/git/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.10-rc7
This is a set of small fixes for various issues found during the last
couple of weeks.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127145324.125776-1-thierry.reding@gmail.com
|
|
The .x25_addr[] address comes from the user and is not necessarily
NUL terminated. This leads to a couple problems. The first problem is
that the strlen() in x25_bind() can read beyond the end of the buffer.
The second problem is more subtle and could result in memory corruption.
The call tree is:
x25_connect()
--> x25_write_internal()
--> x25_addr_aton()
The .x25_addr[] buffers are copied to the "addresses" buffer from
x25_write_internal() so it will lead to stack corruption.
Verify that the strings are NUL terminated and return -EINVAL if they
are not.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: a9288525d2ae ("X25: Dont let x25_bind use addresses containing characters")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/X8ZeAKm8FnFpN//B@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes"
* tag 'gfs2-v5.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix deadlock between gfs2_{create_inode,inode_lookup} and delete_work_func
gfs2: Upgrade shared glocks for atime updates
gfs2: Don't freeze the file system during unmount
gfs2: check for empty rgrp tree in gfs2_ri_update
gfs2: set lockdep subclass for iopen glocks
gfs2: Fix deadlock dumping resource group glocks
|
|
Prior to sanitizing the GGTT, the only operations allowed in
intel_display_init_nogem() are those to reserve the preallocated (and
active) regions in the GGTT leftover from the BIOS. Trying to allocate a
GGTT vma (such as intel_pin_and_fence_fb_obj during the initial modeset)
may then conflict with other preallocated regions that have not yet been
protected.
Move the initial modesetting from the end of init_nogem to the beginning
of init so that any vma pinning (either framebuffers or DSB, for example),
is after the GGTT is ready to handle it.
This will prevent the DSB object from being destroyed too early:
[ 53.449241] BUG: KASAN: use-after-free in i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.449309] Read of size 8 at addr ffff88811b1e8070 by task systemd-udevd/345
[ 53.449399] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G W 5.10.0-rc5+ #12
[ 53.449409] Call Trace:
[ 53.449418] dump_stack+0x9a/0xcc
[ 53.449558] ? i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.449565] print_address_description.constprop.0+0x3e/0x60
[ 53.449577] ? _raw_spin_lock_irqsave+0x4e/0x50
[ 53.449718] ? i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.449849] ? i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.449857] kasan_report.cold+0x1f/0x37
[ 53.449993] ? i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.450130] i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.450273] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915]
[ 53.450281] ? static_obj+0x69/0x80
[ 53.450289] ? lockdep_init_map_waits+0xa9/0x310
[ 53.450431] ? intel_wopcm_init+0x96/0x3d0 [i915]
[ 53.450581] ? i915_gem_init+0x75/0x2d0 [i915]
[ 53.450720] i915_gem_init+0x75/0x2d0 [i915]
[ 53.450852] i915_driver_probe+0x8c2/0x1210 [i915]
[ 53.450993] ? i915_pm_prepare+0x630/0x630 [i915]
[ 53.451006] ? check_chain_key+0x1e7/0x2e0
[ 53.451025] ? __pm_runtime_resume+0x58/0xb0
[ 53.451157] i915_pci_probe+0xa6/0x2b0 [i915]
[ 53.451285] ? i915_pci_remove+0x40/0x40 [i915]
[ 53.451295] ? lockdep_hardirqs_on_prepare+0x124/0x230
[ 53.451302] ? _raw_spin_unlock_irqrestore+0x42/0x50
[ 53.451309] ? lockdep_hardirqs_on+0xbf/0x130
[ 53.451315] ? preempt_count_sub+0xf/0xb0
[ 53.451321] ? _raw_spin_unlock_irqrestore+0x2f/0x50
[ 53.451335] pci_device_probe+0xf9/0x190
[ 53.451350] really_probe+0x17f/0x5b0
[ 53.451365] driver_probe_device+0x13a/0x1c0
[ 53.451376] device_driver_attach+0x82/0x90
[ 53.451386] ? device_driver_attach+0x90/0x90
[ 53.451391] __driver_attach+0xab/0x190
[ 53.451401] ? device_driver_attach+0x90/0x90
[ 53.451407] bus_for_each_dev+0xe4/0x140
[ 53.451414] ? subsys_dev_iter_exit+0x10/0x10
[ 53.451423] ? __list_add_valid+0x2b/0xa0
[ 53.451440] bus_add_driver+0x227/0x2e0
[ 53.451454] driver_register+0xd3/0x150
[ 53.451585] i915_init+0x92/0xac [i915]
[ 53.451592] ? 0xffffffffa0a20000
[ 53.451598] do_one_initcall+0xb6/0x3b0
[ 53.451606] ? trace_event_raw_event_initcall_finish+0x150/0x150
[ 53.451614] ? __kasan_kmalloc.constprop.0+0xc2/0xd0
[ 53.451627] ? kmem_cache_alloc_trace+0x4a4/0x8e0
[ 53.451634] ? kasan_unpoison_shadow+0x33/0x40
[ 53.451649] do_init_module+0xf8/0x350
[ 53.451662] load_module+0x43de/0x47f0
[ 53.451716] ? module_frob_arch_sections+0x20/0x20
[ 53.451731] ? rw_verify_area+0x5f/0x130
[ 53.451780] ? __do_sys_finit_module+0x10d/0x1a0
[ 53.451785] __do_sys_finit_module+0x10d/0x1a0
[ 53.451792] ? __ia32_sys_init_module+0x40/0x40
[ 53.451800] ? seccomp_do_user_notification.isra.0+0x5c0/0x5c0
[ 53.451829] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 53.451835] ? mark_held_locks+0x24/0x90
[ 53.451856] do_syscall_64+0x33/0x80
[ 53.451863] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 53.451868] RIP: 0033:0x7fde09b4470d
[ 53.451875] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 53 f7 0c 00 f7 d8 64 89 01 48
[ 53.451880] RSP: 002b:00007ffd6abc1718 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 53.451890] RAX: ffffffffffffffda RBX: 000056444e528150 RCX: 00007fde09b4470d
[ 53.451895] RDX: 0000000000000000 RSI: 00007fde09a21ded RDI: 000000000000000f
[ 53.451899] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000
[ 53.451904] R10: 000000000000000f R11: 0000000000000246 R12: 00007fde09a21ded
[ 53.451909] R13: 0000000000000000 R14: 000056444e329200 R15: 000056444e528150
[ 53.451957] Allocated by task 345:
[ 53.451995] kasan_save_stack+0x1b/0x40
[ 53.452001] __kasan_kmalloc.constprop.0+0xc2/0xd0
[ 53.452006] kmem_cache_alloc+0x1cd/0x8d0
[ 53.452146] i915_vma_instance+0x126/0xb70 [i915]
[ 53.452304] i915_gem_object_ggtt_pin_ww+0x222/0x3f0 [i915]
[ 53.452446] intel_dsb_prepare+0x14f/0x230 [i915]
[ 53.452588] intel_atomic_commit+0x183/0x690 [i915]
[ 53.452730] intel_initial_commit+0x2bc/0x2f0 [i915]
[ 53.452871] intel_modeset_init_nogem+0xa02/0x2af0 [i915]
[ 53.452995] i915_driver_probe+0x8af/0x1210 [i915]
[ 53.453120] i915_pci_probe+0xa6/0x2b0 [i915]
[ 53.453125] pci_device_probe+0xf9/0x190
[ 53.453131] really_probe+0x17f/0x5b0
[ 53.453136] driver_probe_device+0x13a/0x1c0
[ 53.453142] device_driver_attach+0x82/0x90
[ 53.453148] __driver_attach+0xab/0x190
[ 53.453153] bus_for_each_dev+0xe4/0x140
[ 53.453158] bus_add_driver+0x227/0x2e0
[ 53.453164] driver_register+0xd3/0x150
[ 53.453286] i915_init+0x92/0xac [i915]
[ 53.453292] do_one_initcall+0xb6/0x3b0
[ 53.453297] do_init_module+0xf8/0x350
[ 53.453302] load_module+0x43de/0x47f0
[ 53.453307] __do_sys_finit_module+0x10d/0x1a0
[ 53.453312] do_syscall_64+0x33/0x80
[ 53.453318] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 53.453345] Freed by task 82:
[ 53.453379] kasan_save_stack+0x1b/0x40
[ 53.453384] kasan_set_track+0x1c/0x30
[ 53.453389] kasan_set_free_info+0x1b/0x30
[ 53.453394] __kasan_slab_free+0x112/0x160
[ 53.453399] kmem_cache_free+0xb2/0x3f0
[ 53.453536] i915_gem_flush_free_objects+0x31a/0x3b0 [i915]
[ 53.453542] process_one_work+0x519/0x9f0
[ 53.453547] worker_thread+0x75/0x5c0
[ 53.453552] kthread+0x1da/0x230
[ 53.453557] ret_from_fork+0x22/0x30
[ 53.453584] The buggy address belongs to the object at ffff88811b1e8040
which belongs to the cache i915_vma of size 968
[ 53.453692] The buggy address is located 48 bytes inside of
968-byte region [ffff88811b1e8040, ffff88811b1e8408)
[ 53.453792] The buggy address belongs to the page:
[ 53.453842] page:00000000b35f7048 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88811b1ef940 pfn:0x11b1e8
[ 53.453847] head:00000000b35f7048 order:3 compound_mapcount:0 compound_pincount:0
[ 53.453853] flags: 0x8000000000010200(slab|head)
[ 53.453860] raw: 8000000000010200 ffff888115596248 ffff888115596248 ffff8881155b6340
[ 53.453866] raw: ffff88811b1ef940 0000000000170001 00000001ffffffff 0000000000000000
[ 53.453870] page dumped because: kasan: bad access detected
[ 53.453895] Memory state around the buggy address:
[ 53.453944] ffff88811b1e7f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 53.454011] ffff88811b1e7f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 53.454079] >ffff88811b1e8000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
[ 53.454146] ^
[ 53.454211] ffff88811b1e8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 53.454279] ffff88811b1e8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 53.454347] ==================================================================
[ 53.454414] Disabling lock debugging due to kernel taint
[ 53.454434] general protection fault, probably for non-canonical address 0xdead0000000000d0: 0000 [#1] PREEMPT SMP KASAN PTI
[ 53.454446] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G B W 5.10.0-rc5+ #12
[ 53.454592] RIP: 0010:i915_init_ggtt+0x26f/0x9e0 [i915]
[ 53.454602] Code: 89 8d 48 ff ff ff 4c 8d 60 d0 49 39 c7 0f 84 37 02 00 00 4c 89 b5 40 ff ff ff 4d 8d bc 24 90 00 00 00 4c 89 ff e8 c1 97 f8 e0 <49> 83 bc 24 90 00 00 00 00 0f 84 0f 02 00 00 49 8d 7c 24 08 e8 a8
[ 53.454618] RSP: 0018:ffff88812247f430 EFLAGS: 00010286
[ 53.454625] RAX: 0000000000000000 RBX: ffff888136440000 RCX: ffffffffa03fb78f
[ 53.454633] RDX: 0000000000000000 RSI: 0000000000000008 RDI: dead000000000160
[ 53.454641] RBP: ffff88812247f500 R08: ffffffff8113589f R09: 0000000000000000
[ 53.454648] R10: ffffffff83063843 R11: fffffbfff060c708 R12: dead0000000000d0
[ 53.454656] R13: ffff888136449ba0 R14: 0000000000002000 R15: dead000000000160
[ 53.454664] FS: 00007fde095c4880(0000) GS:ffff88840c880000(0000) knlGS:0000000000000000
[ 53.454672] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 53.454679] CR2: 00007fef132b4f28 CR3: 000000012245c002 CR4: 00000000003706e0
[ 53.454686] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 53.454693] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 53.454700] Call Trace:
[ 53.454833] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915]
Reported-by: Matthew Auld <matthew.auld@intel.com>
Fixes: afeda4f3b1c8 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125193032.29282-1-chris@chris-wilson.co.uk
(cherry picked from commit b3bf99daaee96a141536ce5c60a0d6dba6ec1d23)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
!HAS_DISPLAY() implies !HAS_OVERLAY(), skipping overlay setup anyway, so
return earlier from intel_modeset_init() for clarity.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-4-lucas.demarchi@intel.com
(cherry picked from commit 71c8415d0daa78ef1295743d0e11ba0214d0a9b9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We treat idling the GT (intel_rps_park) as a downclock event, and reduce
the frequency we intend to restart the GT with. Since the two workloads
are likely related (e.g. a compositor rendering every 16ms), we want to
carry the frequency and load information from across the idling.
However, we do also need to update the frequencies so that workloads
that run for less than 1ms are autotuned by RPS (otherwise we leave
compositors running at max clocks, draining excess power). Conversely,
if we try to run too slowly, the next workload has to run longer. Since
there is a hysteresis in the power graph, below a certain frequency
running a short workload for longer consumes more energy than running it
slightly higher for less time. The exact balance point is unknown
beforehand, but measurements with 30fps media playback indicate that RPe
is a better choice.
Reported-by: Edward Baker <edward.baker@intel.com>
Tested-by: Edward Baker <edward.baker@intel.com>
Fixes: 043cd2d14ede ("drm/i915/gt: Leave rps->cur_freq on unpark")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124183521.28623-1-chris@chris-wilson.co.uk
(cherry picked from commit f7ed83cc1925f0b8ce2515044d674354035c3af9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
As we use a shmemfs file to hold the context state, when not in use it
may be swapped out, such as across suspend. Since we wrote into the
shmemfs without marking the pages as dirty, the contents may be dropped
instead of being written back to swap. On re-using the shmemfs file,
such as creating a new context after resume, the contents of that file
were likely garbage and so the new context could then hang the GPU.
Simply mark the page as being written when copying into the shmemfs
file, and it the new contents will be retained across swapout.
Fixes: be1cb55a07bf ("drm/i915/gt: Keep a no-frills swappable copy of the default context state")
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.8+
Link: https://patchwork.freedesktop.org/patch/msgid/20201127120718.454037-161-matthew.auld@intel.com
(cherry picked from commit a9d71f76ccfd309f3bd5f7c9b60e91a4decae792)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
As we funnel more and more contexts into the breadcrumbs on an engine,
the hold time of b->irq_lock grows. As we may then contend with the
b->irq_lock during request submission, this increases the burden upon
the engine->active.lock and so directly impacts both our execution
latency and client latency. If we split the b->irq_lock by introducing a
per-context spinlock to manage the signalers within a context, we then
only need the b->irq_lock for enabling/disabling the interrupt and can
avoid taking the lock for walking the list of contexts within the signal
worker. Even with the current setup, this greatly reduces the number of
times we have to take and fight for b->irq_lock.
Furthermore, this closes the race between enabling the signaling context
while it is in the process of being signaled and removed:
<4>[ 416.208555] list_add corruption. prev->next should be next (ffff8881951d5910), but was dead000000000100. (prev=ffff8882781bb870).
<4>[ 416.208573] WARNING: CPU: 7 PID: 0 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70
<4>[ 416.208575] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp x86_pkg_temp_thermal coretemp ax88179_178a usbnet mii crct10dif_pclmul snd_intel_dspcfg crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core e1000e snd_pcm ptp pps_core mei_me mei prime_numbers intel_lpss_pci [last unloaded: i915]
<4>[ 416.208611] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G U 5.8.0-CI-CI_DRM_8852+ #1
<4>[ 416.208614] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3212.A00.1905212112 05/21/2019
<4>[ 416.208627] RIP: 0010:__list_add_valid+0x4d/0x70
<4>[ 416.208631] Code: c3 48 89 d1 48 c7 c7 60 18 33 82 48 89 c2 e8 ea e0 b6 ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 b0 18 33 82 e8 d3 e0 b6 ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 00 19 33 82 e8
<4>[ 416.208633] RSP: 0018:ffffc90000280e18 EFLAGS: 00010086
<4>[ 416.208636] RAX: 0000000000000000 RBX: ffff888250a44880 RCX: 0000000000000105
<4>[ 416.208639] RDX: 0000000000000105 RSI: ffffffff82320c5b RDI: 00000000ffffffff
<4>[ 416.208641] RBP: ffff8882781bb870 R08: 0000000000000000 R09: 0000000000000001
<4>[ 416.208643] R10: 00000000054d2957 R11: 000000006abbd991 R12: ffff8881951d58c8
<4>[ 416.208646] R13: ffff888286073880 R14: ffff888286073848 R15: ffff8881951d5910
<4>[ 416.208669] FS: 0000000000000000(0000) GS:ffff88829c180000(0000) knlGS:0000000000000000
<4>[ 416.208671] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 416.208673] CR2: 0000556231326c48 CR3: 0000000005610001 CR4: 0000000000760ee0
<4>[ 416.208675] PKRU: 55555554
<4>[ 416.208677] Call Trace:
<4>[ 416.208679] <IRQ>
<4>[ 416.208751] i915_request_enable_breadcrumb+0x278/0x400 [i915]
<4>[ 416.208839] __i915_request_submit+0xca/0x2a0 [i915]
<4>[ 416.208892] __execlists_submission_tasklet+0x480/0x1830 [i915]
<4>[ 416.208942] execlists_submission_tasklet+0xc4/0x130 [i915]
<4>[ 416.208947] tasklet_action_common.isra.17+0x6c/0x1c0
<4>[ 416.208954] __do_softirq+0xdf/0x498
<4>[ 416.208960] ? handle_fasteoi_irq+0x150/0x150
<4>[ 416.208964] asm_call_on_stack+0xf/0x20
<4>[ 416.208966] </IRQ>
<4>[ 416.208969] do_softirq_own_stack+0xa1/0xc0
<4>[ 416.208972] irq_exit_rcu+0xb5/0xc0
<4>[ 416.208976] common_interrupt+0xf7/0x260
<4>[ 416.208980] asm_common_interrupt+0x1e/0x40
<4>[ 416.208985] RIP: 0010:cpuidle_enter_state+0xb6/0x410
<4>[ 416.208987] Code: 00 31 ff e8 9c 3e 89 ff 80 7c 24 0b 00 74 12 9c 58 f6 c4 02 0f 85 31 03 00 00 31 ff e8 e3 6c 90 ff e8 fe a4 94 ff fb 45 85 ed <0f> 88 c7 02 00 00 49 63 c5 4c 2b 24 24 48 8d 14 40 48 8d 14 90 48
<4>[ 416.208989] RSP: 0018:ffffc90000143e70 EFLAGS: 00000206
<4>[ 416.208991] RAX: 0000000000000007 RBX: ffffe8ffffda8070 RCX: 0000000000000000
<4>[ 416.208993] RDX: 0000000000000000 RSI: ffffffff8238b4ee RDI: ffffffff8233184f
<4>[ 416.208995] RBP: ffffffff826b4e00 R08: 0000000000000000 R09: 0000000000000000
<4>[ 416.208997] R10: 0000000000000001 R11: 0000000000000000 R12: 00000060e7f24a8f
<4>[ 416.208998] R13: 0000000000000003 R14: 0000000000000003 R15: 0000000000000003
<4>[ 416.209012] cpuidle_enter+0x24/0x40
<4>[ 416.209016] do_idle+0x22f/0x2d0
<4>[ 416.209022] cpu_startup_entry+0x14/0x20
<4>[ 416.209025] start_secondary+0x158/0x1a0
<4>[ 416.209030] secondary_startup_64+0xa4/0xb0
<4>[ 416.209039] irq event stamp: 10186977
<4>[ 416.209042] hardirqs last enabled at (10186976): [<ffffffff810b9363>] tasklet_action_common.isra.17+0xe3/0x1c0
<4>[ 416.209044] hardirqs last disabled at (10186977): [<ffffffff81a5e5ed>] _raw_spin_lock_irqsave+0xd/0x50
<4>[ 416.209047] softirqs last enabled at (10186968): [<ffffffff810b9a1a>] irq_enter_rcu+0x6a/0x70
<4>[ 416.209049] softirqs last disabled at (10186969): [<ffffffff81c00f4f>] asm_call_on_stack+0xf/0x20
<4>[ 416.209317] list_del corruption, ffff8882781bb870->next is LIST_POISON1 (dead000000000100)
<4>[ 416.209317] WARNING: CPU: 7 PID: 46 at lib/list_debug.c:47 __list_del_entry_valid+0x4e/0x90
<4>[ 416.209317] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp x86_pkg_temp_thermal coretemp ax88179_178a usbnet mii crct10dif_pclmul snd_intel_dspcfg crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core e1000e snd_pcm ptp pps_core mei_me mei prime_numbers intel_lpss_pci [last unloaded: i915]
<4>[ 416.209317] CPU: 7 PID: 46 Comm: ksoftirqd/7 Tainted: G U W 5.8.0-CI-CI_DRM_8852+ #1
<4>[ 416.209317] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3212.A00.1905212112 05/21/2019
<4>[ 416.209317] RIP: 0010:__list_del_entry_valid+0x4e/0x90
<4>[ 416.209317] Code: 2e 48 8b 32 48 39 fe 75 3a 48 8b 50 08 48 39 f2 75 48 b8 01 00 00 00 c3 48 89 fe 48 89 c2 48 c7 c7 38 19 33 82 e8 62 e0 b6 ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 19 33 82 e8 4e e0 b6 ff 0f 0b
<4>[ 416.209317] RSP: 0018:ffffc90000280de8 EFLAGS: 00010086
<4>[ 416.209317] RAX: 0000000000000000 RBX: ffff8882781bb848 RCX: 0000000000010104
<4>[ 416.209317] RDX: 0000000000010104 RSI: ffffffff8238b4ee RDI: 00000000ffffffff
<4>[ 416.209317] RBP: ffff8882781bb880 R08: 0000000000000000 R09: 0000000000000001
<4>[ 416.209317] R10: 000000009fb6666e R11: 00000000feca9427 R12: ffffc90000280e18
<4>[ 416.209317] R13: ffff8881951d5930 R14: dead0000000000d8 R15: ffff8882781bb880
<4>[ 416.209317] FS: 0000000000000000(0000) GS:ffff88829c180000(0000) knlGS:0000000000000000
<4>[ 416.209317] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 416.209317] CR2: 0000556231326c48 CR3: 0000000005610001 CR4: 0000000000760ee0
<4>[ 416.209317] PKRU: 55555554
<4>[ 416.209317] Call Trace:
<4>[ 416.209317] <IRQ>
<4>[ 416.209317] remove_signaling_context.isra.13+0xd/0x70 [i915]
<4>[ 416.209513] signal_irq_work+0x1f7/0x4b0 [i915]
This is caused by virtual engines where although we take the breadcrumb
lock on each of the active engines, they may be different engines on
different requests, It turns out that the b->irq_lock was not a
sufficient proxy for the engine->active.lock in the case of more than
one request, so introduce an explicit lock around ce->signals.
v2: ce->signal_lock is acquired with only RCU protection and so must be
treated carefully and not cleared during reallocation. We also then need
to confirm that the ce we lock is the same as we found in the breadcrumb
list.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2276
Fixes: c18636f76344 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs")
Fixes: 2854d866327a ("drm/i915/gt: Replace intel_engine_transfer_stale_breadcrumbs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201126140407.31952-4-chris@chris-wilson.co.uk
(cherry picked from commit c744d50363b714783bbc88d986cc16def13710f7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Allow a brief period for continued access to a dead intel_context by
deferring the release of the struct until after an RCU grace period.
As we are using a dedicated slab cache for the contexts, we can defer
the release of the slab pages via RCU, with the caveat that individual
structs may be reused from the freelist within an RCU grace period. To
handle that, we have to avoid clearing members of the zombie struct.
This is required for a later patch to handle locking around virtual
requests in the signaler, as those requests may want to move between
engines and be destroyed while we are holding b->irq_lock on a physical
engine.
v2: Drop mutex_reinit(), if we never mark the mutex as destroyed we
don't need to reset the debug code, at the loss of having the mutex
debug code spot us attempting to destroy a locked mutex.
v3: As the intended use will remain strongly referenced counted, with
very little inflight access across reuse, drop the ctor.
v4: Drop the unrequired change to remove the temporary reference around
dropping the active context, and add back some more missing ctor
operations.
v5: The ctor is back. Tvrtko spotted that ce->signal_lock [introduced
later] maybe accessed under RCU and so needs special care not to be
reinitialised.
v6: Don't mix SLAB_TYPESAFE_BY_RCU and RCU list iteration.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201126140407.31952-3-chris@chris-wilson.co.uk
(cherry picked from commit 14d1eaf08845c534963c83f754afe0cb14cb2512)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If arbitration is lost, the master automatically changes to slave mode.
I2SR_IBB may or may not be reset by hardware. Raising a STOP condition
by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB.
So calling i2c_imx_bus_busy() is not required and would busy-wait until
timeout.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org # Requires trivial backporting, simple remove
# the 3rd argument from the calls to
# i2c_imx_bus_busy().
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Arbitration Lost (IAL) can happen after every single byte transfer. If
arbitration is lost, the I2C hardware will autonomously switch from
master mode to slave. If a transfer is not aborted in this state,
consecutive transfers will not be executed by the hardware and will
timeout.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().
Signed-off-by: Christian Eggers <ceggers@arri.de>
Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I'm sad to say that we've got an unusually large arm64 fixes pull for
rc7 which addresses numerous significant instrumentation issues with
our entry code.
Without these patches, lockdep is hopelessly unreliable in some
configurations [1,2] and syzkaller is therefore not a lot of use
because it's so noisy.
Although much of this has always been broken, it appears to have been
exposed more readily by other changes such as 044d0d6de9f5 ("lockdep:
Only trace IRQ edges") and general lockdep improvements around IRQ
tracing and NMIs.
Fixing this properly required moving much of the instrumentation hooks
from our entry assembly into C, which Mark has been working on for the
last few weeks. We're not quite ready to move to the recently added
generic functions yet, but the code here has been deliberately written
to mimic that closely so we can look at cleaning things up once we
have a bit more breathing room.
Having said all that, the second version of these patches was posted
last week and I pushed it into our CI (kernelci and cki) along with a
commit which forced on PROVE_LOCKING, NOHZ_FULL and
CONTEXT_TRACKING_FORCE. The result? We found a real bug in the
md/raid10 code [3].
Oh, and there's also a really silly typo patch that's unrelated.
Summary:
- Fix numerous issues with instrumentation and exception entry
- Fix hideous typo in unused register field definition"
[1] https://lore.kernel.org/r/CACT4Y+aAzoJ48Mh1wNYD17pJqyEcDnrxGfApir=-j171TnQXhw@mail.gmail.com
[2] https://lore.kernel.org/r/20201119193819.GA2601289@elver.google.com
[3] https://lore.kernel.org/r/94c76d5e-466a-bc5f-e6c2-a11b65c39f83@redhat.com
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Fix typo in macro definition
arm64: entry: fix EL1 debug transitions
arm64: entry: fix NMI {user, kernel}->kernel transitions
arm64: entry: fix non-NMI kernel<->kernel transitions
arm64: ptrace: prepare for EL1 irq/rcu tracking
arm64: entry: fix non-NMI user<->kernel transitions
arm64: entry: move el1 irq/nmi logic to C
arm64: entry: prepare ret_to_user for function call
arm64: entry: move enter_from_user_mode to entry-common.c
arm64: entry: mark entry code as noinstr
arm64: mark idle code as noinstr
arm64: syscall: exit userspace before unmasking exceptions
|
|
Pull vdpa fixes from Michael Tsirkin:
"A couple of fixes that surfaced at the last minute"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost_vdpa: return -EFAULT if copy_to_user() fails
vdpa: mlx5: fix vdpa/vhost dependencies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are the pending sound fixes for 5.10: all small device-specific
fixes, and nothing particular stands out, so far"
* tag 'sound-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add mute LED quirk to yet another HP x360 model
ALSA: hda/realtek: Fix bass speaker DAC assignment on Asus Zephyrus G14
ALSA: hda/generic: Add option to enforce preferred_dacs pairs
ALSA: usb-audio: US16x08: fix value count for level meters
ALSA: hda/realtek - Add new codec supported for ALC897
ASoC: rt5682: change SAR voltage threshold
ASoC: wm_adsp: fix error return code in wm_adsp_load()
ALSA: hda/realtek: Enable headset of ASUS UX482EG & B9400CEA with ALC294
ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state
ALSA: hda/realtek - Fixed Dell AIO wrong sound tone
ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull bootconfig fixes from Steven Rostedt:
"Have bootconfig size and checksum be little endian
In case the bootconfig is created on one kind of endian machine, and
then read on the other kind of endian kernel, the size and checksum
will be incorrect. Instead, have both the size and checksum always be
little endian and have the tool and the kernel convert it from little
endian to or from the host endian"
* tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
docs: bootconfig: Add the endianness of fields
tools/bootconfig: Store size and checksum in footer as le32
bootconfig: Load size and checksum in the footer as le32
|
|
The timestamp fields should be copied to new skb too in
A-050385 workaround for later TX timestamping handling.
Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Link: https://lore.kernel.org/r/20201201075258.1875-1-yangbo.lu@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:
skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:109!
Call Trace:
skb_push+0x10/0x10
ip6gre_header+0x47/0x1b0
neigh_connected_output+0xae/0xf0
ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.
Fixes: eb95f52fc72d ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently 'while (q->queued > 0)' loop was removed from mt76u_stop_tx()
code. This causes crash on device removal as we try to cleanup empty
queue:
[ 96.495571] kernel BUG at include/linux/skbuff.h:2297!
[ 96.498983] invalid opcode: 0000 [#1] SMP PTI
[ 96.501162] CPU: 3 PID: 27 Comm: kworker/3:0 Not tainted 5.10.0-rc5+ #11
[ 96.502754] Hardware name: LENOVO 20DGS08H00/20DGS08H00, BIOS J5ET48WW (1.19 ) 08/27/2015
[ 96.504378] Workqueue: usb_hub_wq hub_event
[ 96.505983] RIP: 0010:skb_pull+0x2d/0x30
[ 96.507576] Code: 00 00 8b 47 70 39 c6 77 1e 29 f0 89 47 70 3b 47 74 72 17 48 8b 87 c8 00 00 00 89 f6 48 01 f0 48 89 87 c8 00 00 00 c3 31 c0 c3 <0f> 0b 90 0f 1f 44 00 00 53 48 89 fb 48 8b bf c8 00 00 00 8b 43 70
[ 96.509296] RSP: 0018:ffffb11b801639b8 EFLAGS: 00010287
[ 96.511038] RAX: 000000001c6939ed RBX: ffffb11b801639f8 RCX: 0000000000000000
[ 96.512964] RDX: ffffb11b801639f8 RSI: 0000000000000018 RDI: ffff90c64e4fb800
[ 96.514710] RBP: ffff90c654551ee0 R08: ffff90c652bce7a8 R09: ffffb11b80163728
[ 96.516450] R10: 0000000000000001 R11: 0000000000000001 R12: ffff90c64e4fb800
[ 96.519749] R13: 0000000000000010 R14: 0000000000000020 R15: ffff90c64e352ce8
[ 96.523455] FS: 0000000000000000(0000) GS:ffff90c96eec0000(0000) knlGS:0000000000000000
[ 96.527171] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 96.530900] CR2: 0000242556f18288 CR3: 0000000146a10002 CR4: 00000000003706e0
[ 96.534678] Call Trace:
[ 96.538418] mt76x02u_tx_complete_skb+0x1f/0x50 [mt76x02_usb]
[ 96.542231] mt76_queue_tx_complete+0x23/0x50 [mt76]
[ 96.546028] mt76u_stop_tx.cold+0x71/0xa2 [mt76_usb]
[ 96.549797] mt76x0u_stop+0x2f/0x90 [mt76x0u]
[ 96.553638] drv_stop+0x33/0xd0 [mac80211]
[ 96.557449] ieee80211_do_stop+0x558/0x860 [mac80211]
[ 96.561262] ? dev_deactivate_many+0x298/0x2d0
[ 96.565101] ieee80211_stop+0x16/0x20 [mac80211]
Fix that by adding while loop again. We need loop, not just single
check, to clean all pending entries.
Additionally move mt76_worker_disable/enable after !mt76_has_tx_pending()
as we want to tx_worker to run to process tx queues, while we wait for
exactly that.
I was a bit worried about accessing q->queued without lock, but
mt76_worker_disable() -> kthread_park() should assure this value will
be seen updated on other cpus.
Fixes: fe5b5ab52e9d ("mt76: unify queue tx cleanup code")
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126125520.72912-1-stf_xl@wp.pl
|
|
Some subsytem device IDs were missing from the list, so some AX210
devices were not recognized. Add them.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.a06ba7540449.I7390305d088a49c1043c9b489154fe057989c18f@changeid
Link: https://lore.kernel.org/r/20201121003411.9450-1-ikegami.t@gmail.com
|
|
The NO_160 flag specifies if the device doesn't have 160 MHz support,
but we errorneously assumed the opposite. If the flag was set, we
were considering that 160 MHz was supported, but it's actually the
opposite. Fix it by inverting the bits, i.e. NO_160 is 0x1 and 160
is 0x0.
Fixes: d6f2134a3831 ("iwlwifi: add mac/rf types and 160MHz to the device tables")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.375bec857ccb.I83884286b688965293e9810381808039bd7eedae@changeid
|
|
The 0x0024 subsytem device ID was missing from the list, so some AX210
devices were not recognized. Add it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.308eab4db42c.I3763196cd3f7bb36f3dcabf02ec4e7c4fe859c0f@changeid
|
|
Reflect the fact that the linuxwifi@intel.com address will disappear,
and that neither Emmanuel nor myself are really much involved with
the maintenance these days.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201129151117.a25afe6d2c7f.I8f13a5689dd353825fb2b9bd5b6f0fbce92cb12b@changeid
|
|
With commit 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs
tracing") common code calls arch_cpu_idle() with a lockdep state that
tells irqs are on.
This doesn't work very well for s390: psw_idle() will enable interrupts
to wait for an interrupt. As soon as an interrupt occurs the interrupt
handler will verify if the old context was psw_idle(). If that is the
case the interrupt enablement bits in the old program status word will
be cleared.
A subsequent test in both the external as well as the io interrupt
handler checks if in the old context interrupts were enabled. Due to
the above patching of the old program status word it is assumed the
old context had interrupts disabled, and therefore a call to
TRACE_IRQS_OFF (aka trace_hardirqs_off_caller) is skipped. Which in
turn makes lockdep incorrectly "think" that interrupts are enabled
within the interrupt handler.
Fix this by unconditionally calling TRACE_IRQS_OFF when entering
interrupt handlers. Also call unconditionally TRACE_IRQS_ON when
leaving interrupts handlers.
This leaves the special psw_idle() case, which now returns with
interrupts disabled, but has an "irqs on" lockdep state. So callers of
psw_idle() must adjust the state on their own, if required. This is
currently only __udelay_disabled().
Fixes: 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The directed MSIs are delivered to CPUs whose address is
written to the MSI message address. The current code assumes
that a CPU logical number (as it is seen by the kernel)
is also the CPU address.
The above assumption is not correct, as the CPU address
is rather the value returned by STAP instruction. That
value does not necessarily match the kernel logical CPU
number.
Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
During cci_isr() errors read from register fields belonging to
i2c master1 are currently assigned to the status field belonging to
i2c master0. This patch corrects this error, and always assigns
master1 errors to the status field of master1.
Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Loic Poulain <loic.poulain@linaro.org>
Suggested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fix to return the error code from qup_i2c_change_state()
instaed of 0 in qup_i2c_bam_schedule_desc().
Fixes: fbf9921f8b35d9b2 ("i2c: qup: Fix error handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
