| Age | Commit message (Collapse) | Author |
|---|
|
This callback controls setting of POLLIN, POLLRDNORM output bits of poll()
syscall, but in some cases, it is incorrectly to set it, when socket has
at least 1 bytes of available data. Use 'target' which is already exists.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This callback controls setting of POLLIN, POLLRDNORM output bits of poll()
syscall, but in some cases, it is incorrectly to set it, when socket has
at least 1 bytes of available data. Use 'target' which is already exists.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For Hyper-V it is quiet difficult to support this socket option,due to
transport internals, so disable it.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds transport specific callback for SO_RCVLOWAT, because in some
transports it may be difficult to know current available number of bytes
ready to read. Thus, when SO_RCVLOWAT is set, transport may reject it.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In rtnetlink_rcv_msg function, the permission for all user operations
is checked except the GET operation, which is the same as the checking
in qdisc. Therefore, remove the user rights check in qdisc.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Message-Id: <20220819041854.83372-1-shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
VF tunnel flow already exists and SF tunnel is the
same flow. Support offloading of tunneling over SF device
by allow to attach an encap route over SF and set to use
indirect flow table on SF.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Move the creation of the rules from offloads fdb table init to
per rep vport init.
This way the driver will creating the send to vport meta rule
on any representor, e.g. SF representors.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Split esw_create_offloads_fdb_tables() into smaller functions.
This will help maintenance.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The ft_offloads table serves to steer packets, which are from the
eswitch, to the representor associated with the packets' source vport.
Previously, if a packet's source vport or metadata was not associated
with any representor, it was forwarded to the uplink representor. The
representor got packets it shouldn't have as they weren't coming from
the uplink vport.
One such effect of this breakage can be observed if the uplink
representor is attached to a bridge, where such illegal packets will
be broadcast to the remaining ports, flooding the switch with illegal
packets. In the case where IB loopback (e.g, SNAP) is enabled, all
transmitted packets would be looped back, and received by the uplink
representor, and result in an infinite feedback loop.
Therefore, block this hole by adding a default drop rule to the
ft_offloads table, so that all unmatched packets with no associated
representor are dropped.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Complete the decoupling process of flow steering from en.h.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Let all ttc creation be independent of priv, and pass relevant members
of priv only.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Decouple arfs flow steering functionality from priv.
Make all arfs functions defined under fs.h get flow_steering
struct as an argument, thus helping with the process of decoupling the
whole flow steering API from en.h.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Introduce flow steering debug macros family, fs_*.
These macros bring clean finish to the decoupling of flow steering
process such that all flow steering flows can report warnings and
provide debug information via these exclusive macros.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Create a new fs_ethtool.h header file, where ethtool steering init and
cleanup functions are declared in it.
Make mlx5e_ethtool_steering struct private and declare at en_fs_ethtool.c.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
ethtool steering
Let both mlx5e_ethtool_init_steering and mlx5e_ethtool_cleanup_steering
get ethtool steering struct as input instead of priv, as passing priv is
obsolete.
Also modify other function through the flow similarly.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Convert mlx5e_ethtool_steering member of mlx5e_flow_steering to a
pointer, and allocate dynamically for each profile at flow_steering
init.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Both mlx5e_ptp_alloc_rx_fs and mlx5e_ptp_free_rx_fs only
make use of two priv member, pass them directly instead.
This will help dropping priv from all en_fs file.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Make flow steering files fs_tcp.c/h independent of en.h
such that they go through the flow steering API only.
Make error reports be via mlx5_core API instead of netdev_err API, this
to ensure a safe decoupling from en.h, and prevent redundant argument
passing.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Make flow steering files fs_tt_redirect.c/h independent of en.h
such that it goes through the flow steering API only.
Make error reports be via mlx5_core API instead of netdev_err API, this
to ensure a safe decoupling from en.h, and prevent redundant argument
passing.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Move mlx5e_flow_steering struct to fs_en.c to make it private.
Introduce flow_steering API and let other files go through it.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-18 (ixgbe)
This series contains updates to ixgbe driver only.
Fabio M. De Francesco replaces kmap() call to page_address() for
rx_buffer->page().
Jeff Daly adds a manual AN-37 restart to help resolve issues with some link
partners.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ixgbe: Manual AN-37 for troublesome link partners for X550 SFI
ixgbe: Don't call kmap() on page allocated with GFP_ATOMIC
====================
Link: https://lore.kernel.org/r/20220818223402.1294091-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-18 (ice)
This series contains updates to ice driver only.
Jesse and Anatolii add support for controlling FCS/CRC stripping via
ethtool.
Anirudh allows for 100M speeds on devices which support it.
Sylwester removes ucast_shared field and the associated dead code related
to it.
Mikael removes non-inclusive language from the driver.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: remove non-inclusive language
ice: Remove ucast_shared
ice: Allow 100M speeds for some devices
ice: Implement FCS/CRC and VLAN stripping co-existence policy
ice: Implement control of FCS/CRC stripping
====================
Link: https://lore.kernel.org/r/20220818155207.996297-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jonathan Toppins says:
====================
bonding: 802.3ad: fix no transmission of LACPDUs
Configuring a bond in a specific order can leave the bond in a state
where it never transmits LACPDUs.
The first patch adds some kselftest infrastructure and the reproducer
that demonstrates the problem. The second patch fixes the issue. The
new third patch makes ad_ticks_per_sec a static const and removes the
passing of this variable via the stack.
====================
Link: https://lore.kernel.org/r/cover.1660919940.git.jtoppins@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The value is only ever set once in bond_3ad_initialize and only ever
read otherwise. There seems to be no reason to set the variable via
bond_3ad_initialize when setting the global variable will do. Change
ad_ticks_per_sec to a const to enforce its read-only usage.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is caused by the global variable ad_ticks_per_sec being zero as
demonstrated by the reproducer script discussed below. This causes
all timer values in __ad_timer_to_ticks to be zero, resulting
in the periodic timer to never fire.
To reproduce:
Run the script in
`tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which
puts bonding into a state where it never transmits LACPDUs.
line 44: ip link add fbond type bond mode 4 miimon 200 \
xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast
setting bond param: ad_actor_sys_prio
given:
params.ad_actor_system = 0
call stack:
bond_option_ad_actor_sys_prio()
-> bond_3ad_update_ad_actor_settings()
-> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
-> ad.system.sys_mac_addr = bond->dev->dev_addr; because
params.ad_actor_system == 0
results:
ad.system.sys_mac_addr = bond->dev->dev_addr
line 48: ip link set fbond address 52:54:00:3B:7C:A6
setting bond MAC addr
call stack:
bond->dev->dev_addr = new_mac
line 52: ip link set fbond type bond ad_actor_sys_prio 65535
setting bond param: ad_actor_sys_prio
given:
params.ad_actor_system = 0
call stack:
bond_option_ad_actor_sys_prio()
-> bond_3ad_update_ad_actor_settings()
-> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
-> ad.system.sys_mac_addr = bond->dev->dev_addr; because
params.ad_actor_system == 0
results:
ad.system.sys_mac_addr = bond->dev->dev_addr
line 60: ip link set veth1-bond down master fbond
given:
params.ad_actor_system = 0
params.mode = BOND_MODE_8023AD
ad.system.sys_mac_addr == bond->dev->dev_addr
call stack:
bond_enslave
-> bond_3ad_initialize(); because first slave
-> if ad.system.sys_mac_addr != bond->dev->dev_addr
return
results:
Nothing is run in bond_3ad_initialize() because dev_addr equals
sys_mac_addr leaving the global ad_ticks_per_sec zero as it is
never initialized anywhere else.
The if check around the contents of bond_3ad_initialize() is no longer
needed due to commit 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings
changes immediately") which sets ad.system.sys_mac_addr if any one of
the bonding parameters whos set function calls
bond_3ad_update_ad_actor_settings(). This is because if
ad.system.sys_mac_addr is zero it will be set to the current bond mac
address, this causes the if check to never be true.
Fixes: 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This creates a test collection in drivers/net/bonding for bonding
specific kernel selftests.
The first test is a reproducer that provisions a bond and given the
specific order in how the ip-link(8) commands are issued the bond never
transmits an LACPDU frame on any of its slaves.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since priv->rx_mapping[i] is maped in moxart_mac_open(), we
should unmap it from moxart_mac_stop(). Fixes 2 warnings.
1. During error unwinding in moxart_mac_probe(): "goto init_fail;",
then moxart_mac_free_memory() calls dma_unmap_single() with
priv->rx_mapping[i] pointers zeroed.
WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:963 check_unmap+0x704/0x980
DMA-API: moxart-ethernet 92000000.mac: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=1600 bytes]
CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0+ #60
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0xbc/0x1f0
__warn from warn_slowpath_fmt+0x94/0xc8
warn_slowpath_fmt from check_unmap+0x704/0x980
check_unmap from debug_dma_unmap_page+0x8c/0x9c
debug_dma_unmap_page from moxart_mac_free_memory+0x3c/0xa8
moxart_mac_free_memory from moxart_mac_probe+0x190/0x218
moxart_mac_probe from platform_probe+0x48/0x88
platform_probe from really_probe+0xc0/0x2e4
2. After commands:
ip link set dev eth0 down
ip link set dev eth0 up
WARNING: CPU: 0 PID: 55 at kernel/dma/debug.c:570 add_dma_entry+0x204/0x2ec
DMA-API: moxart-ethernet 92000000.mac: cacheline tracking EEXIST, overlapping mappings aren't supported
CPU: 0 PID: 55 Comm: ip Not tainted 5.19.0+ #57
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0xbc/0x1f0
__warn from warn_slowpath_fmt+0x94/0xc8
warn_slowpath_fmt from add_dma_entry+0x204/0x2ec
add_dma_entry from dma_map_page_attrs+0x110/0x328
dma_map_page_attrs from moxart_mac_open+0x134/0x320
moxart_mac_open from __dev_open+0x11c/0x1ec
__dev_open from __dev_change_flags+0x194/0x22c
__dev_change_flags from dev_change_flags+0x14/0x44
dev_change_flags from devinet_ioctl+0x6d4/0x93c
devinet_ioctl from inet_ioctl+0x1ac/0x25c
v1 -> v2:
Extraneous change removed.
Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220819110519.1230877-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For some MAC drivers, they set the mac_managed_pm to true in its
->ndo_open() callback. So before the mac_managed_pm is set to true,
we still want to leverage the mdio_bus_phy_suspend()/resume() for
the phy device suspend and resume. In this case, the phy device is
in PHY_READY, and we shouldn't warn about this. It also seems that
the check of mac_managed_pm in WARN_ON is redundant since we already
check this in the entry of mdio_bus_phy_resume(), so drop it.
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220819082451.1992102-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 129bd7ca8ac0 ("net: dsa: Prevent usage of NET_DSA_TAG_8021Q
as tagging protocol"), dsa_8021q_netdev_ops no longer exists, so remove
the comment that talks about it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220818143808.2808393-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ipa_smem_init(), a Qualcomm SMEM region is allocated (if needed)
and then its virtual address is fetched using qcom_smem_get(). The
physical address associated with that region is also fetched.
The physical address is adjusted so that it is page-aligned, and an
attempt is made to update the size of the region to compensate for
any non-zero adjustment.
But that adjustment isn't done properly. The physical address is
aligned twice, and as a result the size is never actually adjusted.
Fix this by *not* aligning the "addr" local variable, and instead
making the "phys" local variable be the adjusted "addr" value.
Fixes: a0036bb413d5b ("net: ipa: define SMEM memory region for IPA")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220818134206.567618-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210228.8635-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210226.8587-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210218.8443-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220818210216.8419-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210215.8395-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210227.8611-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210222.8515-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210220.8491-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210219.8467-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210214.8371-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220818210212.8347-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210206.8299-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210204.8275-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210023.6889-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DSA has multiple ways of specifying a MAC connection to an internal PHY.
One requires a DT description like this:
port@0 {
reg = <0>;
phy-handle = <&internal_phy>;
phy-mode = "internal";
};
(which is IMO the recommended approach, as it is the clearest
description)
but it is also possible to leave the specification as just:
port@0 {
reg = <0>;
}
and if the driver implements ds->ops->phy_read and ds->ops->phy_write,
the DSA framework "knows" it should create a ds->slave_mii_bus, and it
should connect to a non-OF-based internal PHY on this MDIO bus, at an
MDIO address equal to the port address.
There is also an intermediary way of describing things:
port@0 {
reg = <0>;
phy-handle = <&internal_phy>;
};
In case 2, DSA calls phylink_connect_phy() and in case 3, it calls
phylink_of_phy_connect(). In both cases, phylink_create() has been
called with a phy_interface_t of PHY_INTERFACE_MODE_NA, and in both
cases, PHY_INTERFACE_MODE_NA is translated into phy->interface.
It is important to note that phy_device_create() initializes
dev->interface = PHY_INTERFACE_MODE_GMII, and so, when we use
phylink_create(PHY_INTERFACE_MODE_NA), no one will override this, and we
will end up with a PHY_INTERFACE_MODE_GMII interface inherited from the
PHY.
All this means that in order to maintain compatibility with device tree
blobs where the phy-mode property is missing, we need to allow the
"gmii" phy-mode and treat it as "internal".
Fixes: 2c709e0bdad4 ("net: dsa: microchip: ksz8795: add phylink support")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216320
Reported-by: Craig McQueen <craig@mcqueen.id.au>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Tested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20220818143250.2797111-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
Validate OF nodes for DSA shared ports
This is the first set of measures taken so that more drivers can be
transitioned towards phylink on shared (CPU and DSA) ports some time in
the future. It consists of:
- expanding the DT schema for DSA and related drivers to clarify the new
requirements.
- introducing warnings for drivers that currently skip phylink due to
incomplete DT descriptions.
- introducing warning for drivers that currently skip phylink due to
using platform data (search for struct dsa_chip_data).
- closing the possibility for new(ish) drivers to skip phylink, by
validating their DT descriptions.
- making the code paths used by shared ports more evident.
- preparing the code paths used by shared ports for further work to fake
a link description where that is possible.
More details in patch 10/10.
DT binding (patches 1-6) and kernel (7-10) are in principle separable,
but are submitted together since they're part of the same story.
Patches 8 and 9 are DSA cleanups, and patch 7 is a dependency for patch
10.
v1 at
https://patchwork.kernel.org/project/netdevbpf/patch/20220723164635.1621911-1-vladimir.oltean@nxp.com/
v2 at
https://patchwork.kernel.org/project/netdevbpf/patch/20220729132119.1191227-5-vladimir.oltean@nxp.com/
v3 at
https://patchwork.kernel.org/project/netdevbpf/cover/20220806141059.2498226-1-vladimir.oltean@nxp.com/
====================
Link: https://lore.kernel.org/r/20220818115500.2592578-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Early DSA drivers were kind of simplistic in that they assumed a fairly
narrow hardware layout. User ports would have integrated PHYs at an
internal MDIO address that is derivable from the port number, and shared
(DSA and CPU) ports would have an MII-style (serial or parallel)
connection to another MAC. Phylib and then phylink were used to drive
the internal PHYs, and this needed little to no description through the
platform data structures. Bringing up the shared ports at the maximum
supported link speed was the responsibility of the drivers.
As a result of this, when these early drivers were converted from
platform data to the new DSA OF bindings, there was no link information
translated into the first DT bindings.
https://lore.kernel.org/all/YtXFtTsf++AeDm1l@lunn.ch/
Later, phylink was adopted for shared ports as well, and today we have a
workaround in place, introduced by commit a20f997010c4 ("net: dsa: Don't
instantiate phylink for CPU/DSA ports unless needed"). There, DSA checks
for the presence of phy-handle/fixed-link/managed OF properties, and if
missing, phylink registration would be skipped. This is because phylink
is optional for some drivers (the shared ports already work without it),
but the process of starting to register a port with phylink is
irreversible: if phylink_create() fails to find the fwnode properties it
needs, it bails out and it leaves the ports inoperational (because
phylink expects ports to be initially down, so DSA necessarily takes
them down, and doesn't know how to put them back up again).
DSA being a common framework, new drivers opt into this workaround
willy-nilly, but the ideal behavior from the DSA core's side would have
been to not interfere with phylink's process of failing at all. This
isn't possible because of regression concerns with pre-phylink DT blobs,
but at least DSA should put a stop to the proliferation of more of such
cases that rely on the workaround to skip phylink registration, and
sanitize the environment that new drivers work in.
To that end, create a list of compatible strings for which the
workaround is preserved, and don't apply the workaround for any drivers
outside that list (this includes new drivers).
In some cases, we make the assumption that even existing drivers don't
rely on DSA's workaround, and we do this by looking at the device trees
in which they appear. We can't fully know what is the situation with
downstream DT blobs, but we can guess the overall trend by studying the
DT blobs that were submitted upstream. If there are upstream blobs that
have lacking descriptions, we take it as very likely that there are many
more downstream blobs that do so too. If all upstream blobs have
complete descriptions, we take that as a hint that the driver is a
candidate for enforcing strict DT bindings (considering that most
bindings are copy-pasted). If there are no upstream DT blobs, we take
the conservative route of allowing the workaround, unless the driver
maintainer instructs us otherwise.
The driver situation is as follows:
ar9331
~~~~~~
compatible strings:
- qca,ar9331-switch
1 occurrence in mainline device trees, part of SoC dtsi
(arch/mips/boot/dts/qca/ar9331.dtsi), description is not problematic.
Verdict: opt into strict DT bindings and out of workarounds.
b53
~~~
compatible strings:
- brcm,bcm5325
- brcm,bcm53115
- brcm,bcm53125
- brcm,bcm53128
- brcm,bcm5365
- brcm,bcm5389
- brcm,bcm5395
- brcm,bcm5397
- brcm,bcm5398
- brcm,bcm53010-srab
- brcm,bcm53011-srab
- brcm,bcm53012-srab
- brcm,bcm53018-srab
- brcm,bcm53019-srab
- brcm,bcm5301x-srab
- brcm,bcm11360-srab
- brcm,bcm58522-srab
- brcm,bcm58525-srab
- brcm,bcm58535-srab
- brcm,bcm58622-srab
- brcm,bcm58623-srab
- brcm,bcm58625-srab
- brcm,bcm88312-srab
- brcm,cygnus-srab
- brcm,nsp-srab
- brcm,omega-srab
- brcm,bcm3384-switch
- brcm,bcm6328-switch
- brcm,bcm6368-switch
- brcm,bcm63xx-switch
I've found at least these mainline DT blobs with problems:
arch/arm/boot/dts/bcm47094-linksys-panamera.dts
- lacks phy-mode
arch/arm/boot/dts/bcm47189-tenda-ac9.dts
- lacks phy-mode and fixed-link
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
- lacks phy-mode and fixed-link
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
arch/arm/boot/dts/bcm953012er.dts
arch/arm/boot/dts/bcm4708-netgear-r6250.dts
arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
- lacks phy-mode and fixed-link
arch/arm/boot/dts/bcm53016-meraki-mr32.dts
- lacks phy-mode
Verdict: opt into DSA workarounds.
bcm_sf2
~~~~~~~
compatible strings:
- brcm,bcm4908-switch
- brcm,bcm7445-switch-v4.0
- brcm,bcm7278-switch-v4.0
- brcm,bcm7278-switch-v4.8
A single occurrence in mainline
(arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi), part of a SoC
dtsi, valid description. Florian Fainelli explains that most of the
bcm_sf2 device trees lack a full description for the internal IMP
ports.
Verdict: opt the BCM4908 into strict DT bindings, and opt the rest
into the workarounds. Note that even though BCM4908 has strict DT
bindings, it still does not register with phylink on the IMP port
due to it implementing ->adjust_link().
hellcreek
~~~~~~~~~
compatible strings:
- hirschmann,hellcreek-de1soc-r1
No occurrence in mainline device trees. Kurt Kanzenbach explains
that the downstream device trees lacked phy-mode and fixed link, and
needed work, but were fixed in the meantime.
Verdict: opt into strict DT bindings and out of workarounds.
lan9303
~~~~~~~
compatible strings:
- smsc,lan9303-mdio
- smsc,lan9303-i2c
1 occurrence in mainline device trees:
arch/arm/boot/dts/imx53-kp-hsc.dts
- no phy-mode, no fixed-link
Verdict: opt out of strict DT bindings and into workarounds.
lantiq_gswip
~~~~~~~~~~~~
compatible strings:
- lantiq,xrx200-gswip
- lantiq,xrx300-gswip
- lantiq,xrx330-gswip
No occurrences in mainline device trees. Martin Blumenstingl
confirms that the downstream OpenWrt device trees lack a proper
fixed-link and need work, and that the incomplete description can
even be seen in the example from
Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt.
Verdict: opt out of strict DT bindings and into workarounds.
microchip ksz
~~~~~~~~~~~~~
compatible strings:
- microchip,ksz8765
- microchip,ksz8794
- microchip,ksz8795
- microchip,ksz8863
- microchip,ksz8873
- microchip,ksz9477
- microchip,ksz9897
- microchip,ksz9893
- microchip,ksz9563
- microchip,ksz8563
- microchip,ksz9567
- microchip,lan9370
- microchip,lan9371
- microchip,lan9372
- microchip,lan9373
- microchip,lan9374
5 occurrences in mainline device trees, all descriptions are valid.
But we had a snafu for the ksz8795 and ksz9477 drivers where the
phy-mode property would be expected to be located directly under the
'switch' node rather than under a port OF node. It was fixed by
commit edecfa98f602 ("net: dsa: microchip: look for phy-mode in port
nodes"). The driver still has compatibility with the old DT blobs.
The lan937x support was added later than the above snafu was fixed,
and even though it has support for the broken DT blobs by virtue of
sharing a common probing function, I'll take it that its DT blobs
are correct.
Verdict: opt lan937x into strict DT bindings, and the others out.
mt7530
~~~~~~
compatible strings
- mediatek,mt7621
- mediatek,mt7530
- mediatek,mt7531
Multiple occurrences in mainline device trees, one is part of an SoC
dtsi (arch/mips/boot/dts/ralink/mt7621.dtsi), all descriptions are fine.
Verdict: opt into strict DT bindings and out of workarounds.
mv88e6060
~~~~~~~~~
compatible string:
- marvell,mv88e6060
no occurrences in mainline, nobody knows anybody who uses it.
Verdict: opt out of strict DT bindings and into workarounds.
mv88e6xxx
~~~~~~~~~
compatible strings:
- marvell,mv88e6085
- marvell,mv88e6190
- marvell,mv88e6250
Device trees that have incomplete descriptions of CPU or DSA ports:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
- lacks phy-mode
arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
- lacks phy-mode and fixed-link
arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
- lacks phy-mode
arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
- lacks phy-mode
arch/arm/boot/dts/vf610-zii-spb4.dts
- lacks phy-mode
arch/arm/boot/dts/vf610-zii-cfu1.dts
- lacks phy-mode
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
- lacks phy-mode on CPU port, fixed-link on DSA ports
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
- lacks phy-mode on CPU port
arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
- lacks phy-mode
arch/arm/boot/dts/vf610-zii-scu4-aib.dts
- lacks fixed-link on xgmii DSA ports and/or in-band-status on
2500base-x DSA ports, and phy-mode on CPU port
arch/arm/boot/dts/imx6qdl-gw5904.dtsi
- lacks phy-mode and fixed-link
arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
- lacks phy-mode and fixed-link
arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
- lacks phy-mode
arch/arm/boot/dts/kirkwood-dir665.dts
- lacks phy-mode
arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
- lacks phy-mode
arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
- lacks phy-mode and fixed-link
arch/arm/boot/dts/armada-388-clearfog.dts
- lacks phy-mode
arch/arm/boot/dts/armada-xp-linksys-mamba.dts
- lacks phy-mode
arch/arm/boot/dts/armada-385-linksys.dtsi
- lacks phy-mode
arch/arm/boot/dts/imx6q-b450v3.dts
arch/arm/boot/dts/imx6q-b850v3.dts
- has a phy-handle but not a phy-mode?
arch/arm/boot/dts/armada-370-rd.dts
- lacks phy-mode
arch/arm/boot/dts/kirkwood-linksys-viper.dts
- lacks phy-mode
arch/arm/boot/dts/imx51-zii-rdu1.dts
- lacks phy-mode
arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
- lacks phy-mode
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
- lacks phy-mode
arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
- lacks phy-mode and fixed-link
Verdict: opt out of strict DT bindings and into workarounds.
ocelot
~~~~~~
compatible strings:
- mscc,vsc9953-switch
- felix (arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi) is a PCI
device, has no compatible string
2 occurrences in mainline, both are part of SoC dtsi and complete.
Verdict: opt into strict DT bindings and out of workarounds.
qca8k
~~~~~
compatible strings:
- qca,qca8327
- qca,qca8328
- qca,qca8334
- qca,qca8337
5 occurrences in mainline device trees, none of the descriptions are
problematic.
Verdict: opt into strict DT bindings and out of workarounds.
realtek
~~~~~~~
compatible strings:
- realtek,rtl8366rb
- realtek,rtl8365mb
2 occurrences in mainline, both descriptions are fine, additionally
rtl8365mb.c has a comment "The device tree firmware should also
specify the link partner of the extension port - either via a
fixed-link or other phy-handle."
Verdict: opt into strict DT bindings and out of workarounds.
rzn1_a5psw
~~~~~~~~~~
compatible strings:
- renesas,rzn1-a5psw
One single occurrence, part of SoC dtsi
(arch/arm/boot/dts/r9a06g032.dtsi), description is fine.
Verdict: opt into strict DT bindings and out of workarounds.
sja1105
~~~~~~~
Driver already validates its port OF nodes in
sja1105_parse_ports_node().
Verdict: opt into strict DT bindings and out of workarounds.
vsc73xx
~~~~~~~
compatible strings:
- vitesse,vsc7385
- vitesse,vsc7388
- vitesse,vsc7395
- vitesse,vsc7398
2 occurrences in mainline device trees, both descriptions are fine.
Verdict: opt into strict DT bindings and out of workarounds.
xrs700x
~~~~~~~
compatible strings:
- arrow,xrs7003e
- arrow,xrs7003f
- arrow,xrs7004e
- arrow,xrs7004f
no occurrences in mainline, we don't know.
Verdict: opt out of strict DT bindings and into workarounds.
Because there is a pattern where newly added switches reuse existing
drivers more often than introducing new ones, I've opted for deciding
who gets to opt into the workaround based on an OF compatible match
table in the DSA core. The alternative would have been to add another
boolean property to struct dsa_switch, like configure_vlan_while_not_filtering.
But this avoids situations where sometimes driver maintainers obfuscate
what goes on by sharing a common probing function, and therefore making
new switches inherit old quirks.
Side note, we also warn about missing properties for drivers that rely
on the workaround. This isn't an indication that we'll break
compatibility with those DT blobs any time soon, but is rather done to
raise awareness about the change, for future DT blob authors.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk> # realtek
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a subset of functions that applies only to shared (DSA and CPU)
ports, yet this is difficult to comprehend by looking at their code alone.
These are dsa_port_link_register_of(), dsa_port_link_unregister_of(),
and the functions that only these 2 call.
Rename this class of functions to dsa_shared_port_* to make this fact
more evident, even if this goes against the apparent convention that
function names in port.c must start with dsa_port_.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dsa_port_link_register_of() and dsa_port_link_unregister_of() are not
written with the fact in mind that they can be called with a dp->dn that
is NULL (as evidenced even by the _of suffix in their name), but this is
exactly what happens.
How this behaves will differ depending on whether the backing driver
implements ->adjust_link() or not.
If it doesn't, the "if (of_phy_is_fixed_link(dp->dn) || phy_np)"
condition will return false, and dsa_port_link_register_of() will do
nothing and return 0.
If the driver does implement ->adjust_link(), the
"if (of_phy_is_fixed_link(dp->dn))" condition will return false
(dp->dn is NULL) and we will call dsa_port_setup_phy_of(). This will
call dsa_port_get_phy_device(), which will also return NULL, and we will
also do nothing and return 0.
It is hard to maintain this code and make future changes to it in this
state, so just suppress calls to these 2 functions if dp->dn is NULL.
The only functional effect is that if the driver does implement
->adjust_link(), we'll stop printing this to the console:
Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
but instead we'll always print:
[ 8.539848] dsa-loop fixed-0:1f: skipping link registration for CPU port 5
This is for the better anyway, since "using legacy phylib callbacks"
was misleading information - we weren't issuing _any_ callbacks due to
dsa_port_get_phy_device() returning NULL.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modules such as net/dsa/dsa_core.ko might want to iterate through an
array of compatible strings for things such as validation (or rather,
skipping it for some potentially broken drivers).
of_device_is_compatible() is exported, by of_device_compatible_match()
isn't. Export the latter as well, so we don't have to open-code the
iteration.
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
