| Age | Commit message (Collapse) | Author |
|---|
|
This typedef is not used any more.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Remove the unnecessary variable 'len' and fix a comment to refer to
the folio instead of the page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
- Refer to folios where appropriate, not pages (Matthew Wilcox)
- Eliminate references to the internal PG_readhead
- Use "readahead" consistently - not "read-ahead" or "read ahead"
(mostly Neil Brown)
- Clarify some sections that, on reflection, weren't very clear (Neil
Brown)
- Minor punctuation/spelling fixes (Neil Brown)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
The skip_page argument to read_pages controls if rac->_index is
incremented before returning from the function. Just open code that in
the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This is always an empty list or NULL with the removal of the ->readahead
support, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
All filesystems have now been converted to use ->readahead, so
remove the ->readpages operation and fix all the comments that
used to refer to it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
With no remaining users, remove this function and the related
infrastructure.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few fixes that have been gathered since the previous pull:
- An additional fix for potential PCM deadlocks
- A series of HD-audio CS8409 codec patches for new models
- Other device specific fixes for HD-audio, ASoC mediatek, Intel,
fsl, rockchip"
* tag 'sound-fix-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock
ALSA: hda: Avoid unsol event during RPM suspending
ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
ALSA: hda/cs8409: Add new Dolphin HW variants
ALSA: hda/cs8409: Disable HSBIAS_SENSE_EN for Cyborg
ALSA: hda/cs8409: Support new Warlock MLK Variants
ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants
ALSA: hda/cs8409: Re-order quirk table into ascending order
ALSA: hda/cs8409: Fix Warlock to use mono mic configuration
ALSA: cs4236: fix an incorrect NULL check on list iterator
ALSA: hda/realtek: Enable headset mic on Lenovo P360
ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV
ALSA: hda/realtek: Add mute and micmut LED support for Zbook Fury 17 G9
ASoC: rockchip: i2s_tdm: Fixup config for SND_SOC_DAIFMT_DSP_A/B
ASoC: fsl-asoc-card: Fix jack_event() always return 0
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- grammar and formatting fixes in comments for gpio-ts4900
- correct links in gpio-ts5500
- fix a warning in doc generation for the core GPIO documentation
* tag 'gpio-fixes-for-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ts5500: Fix Links to Technologic Systems web resources
gpio: Properly document parent data union
gpio: ts4900: Fix comment formatting and grammar
|
|
Expanded testing of DM's bio polling support (using more fio threads
to dm-linear ontop of null_blk) exposed the possibility for polled
bios to hang (repeatedly polling in io_uring) when null_blk responds
with BLK_STS_AGAIN (due to lack of resources):
1) io_complete_rw_iopoll() is called from blkdev_bio_end_io_async() to
notify kiocb is done, that is the completion interface between block
layer and io_uring
2) io_complete_rw_iopoll() is called from io_do_iopoll()
3) dm returns BLK_STS_AGAIN for one bio (on behalf of underlying
driver), then io_complete_rw_iopoll is called, but io_do_iopoll()
doesn't handle -EAGAIN at all (due to logic in io_rw_should_reissue)
4) reason for dm's BLK_STS_AGAIN is underlying null_blk driver ran out
of requests (easier to reproduce by setting low hw_queue_depth).
5) dm should handle BLK_STS_AGAIN for POLLED underlying IO, and may
retry in dm layer.
This fix adds REQ_POLLED specific BLK_STS_AGAIN handling to
dm_io_complete() that clears REQ_POLLED and requeues the bio to DM
using queue_io().
Fixes: b99fdcdc3636 ("dm: support bio polling")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[snitzer: revised header, reused dm_io_complete's REQ_POLLED case]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Early alpha processors cannot write a single byte or short; they read 8
bytes, modify the value in registers and write back 8 bytes.
This could cause race condition in the structure dm_io - if the fields
flags and io_count are modified simultaneously.
Fix this bug by using 32-bit flags if we are on Alpha and if we are
compiling for a processor that doesn't have the byte-word-extension.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: bd4a6dd241ae ("dm: reduce size of dm_io and dm_target_io structs")
[snitzer: Jens allowed this change since Mikulas owns a relevant Alpha!]
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a revert of a patch resetting extra buttons on touchpads claiming to
be buttonpads as this caused regression on certain Dell devices
- a new driver for Mediatek MT6779 keypad
- a new driver for Imagis touchscreen
- rework of Google/Chrome OS "Vivaldi" keyboard handling
- assorted driver fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (31 commits)
Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
Input: adi - remove redundant variable z
Input: add Imagis touchscreen driver
dt-bindings: input/touchscreen: bindings for Imagis
Input: synaptics - enable InterTouch on ThinkPad T14/P14s Gen 1 AMD
Input: stmfts - fix reference leak in stmfts_input_open
Input: add bounds checking to input_set_capability()
Input: iqs5xx - use local input_dev pointer
HID: google: modify HID device groups of eel
HID: google: Add support for vivaldi to hid-hammer
HID: google: extract Vivaldi hid feature mapping for use in hid-hammer
Input: extract ChromeOS vivaldi physmap show function
HID: google: switch to devm when registering keyboard backlight LED
Input: mt6779-keypad - fix signedness bug
Input: mt6779-keypad - add MediaTek keypad driver
dt-bindings: input: Add bindings for Mediatek matrix keypad
Input: da9063 - use devm_delayed_work_autocancel()
Input: goodix - fix race on driver unbind
Input: goodix - use input_copy_abs() helper
Input: add input_copy_abs() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The bulk of the patches are about replacing the uie_unsupported struct
rtc_device member by a feature bit.
Subsystem:
- remove uie_unsupported, all users have been converted to clear
RTC_FEATURE_UPDATE_INTERRUPT and provide a reason
- RTCs with an alarm with a resolution of a minute are now letting
the core handle rounding down the alarm time
- fix use-after-free on device removal
New driver:
- OP-TEE RTC PTA
Drivers:
- sun6i: Add H616 support
- cmos: Fix the AltCentury for AMD platforms
- spear: set range"
* tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (56 commits)
rtc: check if __rtc_read_time was successful
rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram
rtc: mc146818-lib: Fix the AltCentury for AMD platforms
rtc: optee: add RTC driver for OP-TEE RTC PTA
rtc: pm8xxx: Return -ENODEV if set_time disallowed
rtc: pm8xxx: Attach wake irq to device
clk: sunxi-ng: sun6i-rtc: include clk/sunxi-ng.h
rtc: remove uie_unsupported
rtc: xgene: stop using uie_unsupported
rtc: hym8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
rtc: hym8563: let the core handle the alarm resolution
rtc: hym8563: switch to devm_rtc_allocate_device
rtc: efi: switch to RTC_FEATURE_UPDATE_INTERRUPT
rtc: efi: switch to devm_rtc_allocate_device
rtc: add new RTC_FEATURE_ALARM_WAKEUP_ONLY feature
rtc: spear: fix spear_rtc_read_time
rtc: spear: drop uie_unsupported
rtc: spear: set range
rtc: spear: switch to devm_rtc_allocate_device
rtc: pcf8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
...
|
|
|
|
This reverts commit 6580c5c18fb3df2b11c5e0452372f815deeff895.
This patch is buggy, as noted in the patch linked below. The root cause
has been solved by removing '-mno-global-merge' for the entire kernel.
Link: https://lore.kernel.org/r/20220322173547.677760-1-nathan@kernel.org/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This flag is specific to clang, where it is only used by the 32-bit and
64-bit ARM backends. In certain situations, the presence of this flag
will cause a warning, as shown by commit 6580c5c18fb3 ("um: clang: Strip
out -mno-global-merge from USER_CFLAGS").
Since commit 61163efae020 ("kbuild: LLVMLinux: Add Kbuild support for
building kernel with Clang") that added this flag back in 2014, there
have been quite a few changes to the GlobalMerge pass in LLVM. Building
several different ARCH=arm and ARCH=arm64 configurations with LLVM 11
(minimum) and 15 (current main version) with this flag removed (i.e.,
with the default of '-mglobal-merge') reveals no modpost warnings, so it
is likely that the issue noted in the comment is no longer relevant due
to changes in LLVM or modpost, meaning this flag can be removed.
If any new warnings show up that are a result of the removal of this
flag, it can be added back under arch/arm{,64}/Makefile to avoid
warnings on other architectures.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The two commits
d8d2d38275c1 ("kbuild: remove PYTHON variable")
a8cccdd95473 ("init: lto: ensure initcall ordering")
were applied in the same development cycle, into two different trees.
After they were merged together, this ${PYTHON} expands to an empty
string.
Therefore, ${srctree}/scripts/jobserver-exec is executed directly.
(it has the executable bit set)
This is working but let's fix the code into the intended form.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
|
|
This comment is about kconfig_print_symbol(), which was removed by
commit 6ce45a91a982 ("kconfig: refactor conf_write_symbol()").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit f6f72f32c22c ("dm integrity: don't replay journal data past the
end of the device") skips journal replay if the target sector points
beyond the end of the device. Unfortunatelly, it doesn't set the
journal entry unused, which resulted in this BUG being triggered:
BUG_ON(!journal_entry_is_unused(je))
Fix this by calling journal_entry_set_unused() for this case.
Fixes: f6f72f32c22c ("dm integrity: don't replay journal data past the end of the device")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
[snitzer: revised header]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
This will help triage bugs when userspace is passing invalid ioctl
structure to the kernel.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[snitzer: log errors using DMERR instead of DMWARN]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The following KASAN warning is detected by QEMU.
==================================================================
BUG: KASAN: stack-out-of-bounds in unwind_frame+0x508/0x870
Read of size 4 at addr c36bba90 by task cat/163
CPU: 1 PID: 163 Comm: cat Not tainted 5.10.0-rc1 #40
Hardware name: ARM-Versatile Express
[<c0113fac>] (unwind_backtrace) from [<c010e71c>] (show_stack+0x10/0x14)
[<c010e71c>] (show_stack) from [<c0b805b4>] (dump_stack+0x98/0xb0)
[<c0b805b4>] (dump_stack) from [<c0b7d658>] (print_address_description.constprop.0+0x58/0x4bc)
[<c0b7d658>] (print_address_description.constprop.0) from [<c031435c>] (kasan_report+0x154/0x170)
[<c031435c>] (kasan_report) from [<c0113c44>] (unwind_frame+0x508/0x870)
[<c0113c44>] (unwind_frame) from [<c010e298>] (__save_stack_trace+0x110/0x134)
[<c010e298>] (__save_stack_trace) from [<c01ce0d8>] (stack_trace_save+0x8c/0xb4)
[<c01ce0d8>] (stack_trace_save) from [<c0313520>] (kasan_set_track+0x38/0x60)
[<c0313520>] (kasan_set_track) from [<c0314cb8>] (kasan_set_free_info+0x20/0x2c)
[<c0314cb8>] (kasan_set_free_info) from [<c0313474>] (__kasan_slab_free+0xec/0x120)
[<c0313474>] (__kasan_slab_free) from [<c0311e20>] (kmem_cache_free+0x7c/0x334)
[<c0311e20>] (kmem_cache_free) from [<c01c35dc>] (rcu_core+0x390/0xccc)
[<c01c35dc>] (rcu_core) from [<c01013a8>] (__do_softirq+0x180/0x518)
[<c01013a8>] (__do_softirq) from [<c0135214>] (irq_exit+0x9c/0xe0)
[<c0135214>] (irq_exit) from [<c01a40e4>] (__handle_domain_irq+0xb0/0x110)
[<c01a40e4>] (__handle_domain_irq) from [<c0691248>] (gic_handle_irq+0xa0/0xb8)
[<c0691248>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x94)
Exception stack(0xc36bb928 to 0xc36bb970)
b920: c36bb9c0 00000000 c0126919 c0101228 c36bb9c0 b76d7730
b940: c36b8000 c36bb9a0 c3335b00 c01ce0d8 00000003 c36bba3c c36bb940 c36bb978
b960: c010e298 c011373c 60000013 ffffffff
[<c0100b0c>] (__irq_svc) from [<c011373c>] (unwind_frame+0x0/0x870)
[<c011373c>] (unwind_frame) from [<00000000>] (0x0)
The buggy address belongs to the page:
page:(ptrval) refcount:0 mapcount:0 mapping:00000000 index:0x0 pfn:0x636bb
flags: 0x0()
raw: 00000000 00000000 ef867764 00000000 00000000 00000000 ffffffff 00000000
page dumped because: kasan: bad access detected
addr c36bba90 is located in stack of task cat/163 at offset 48 in frame:
stack_trace_save+0x0/0xb4
this frame has 1 object:
[32, 48) 'trace'
Memory state around the buggy address:
c36bb980: f1 f1 f1 f1 00 04 f2 f2 00 00 f3 f3 00 00 00 00
c36bba00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
>c36bba80: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
c36bbb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c36bbb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
There is a same issue on x86 and has been resolved by the commit f7d27c35ddff
("x86/mm, kasan: Silence KASAN warnings in get_wchan()").
The solution could be applied to arm architecture too.
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Reported-by: He Ying <heying24@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add invalid input check expression when 'crashkernel=0' is specified
running kdump.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Nikolay Aleksandrov says:
====================
net: ipv4: fix nexthop route delete warning
The first patch fixes a warning that can be triggered by deleting a
nexthop route and specifying a device (more info in its commit msg).
And the second patch adds a selftest for that case.
Chose this way to fix it because we should match when deleting without
nh spec and should fail when deleting a nexthop route with old-style nh
spec because nexthop objects are managed separately, e.g.:
$ ip r show 1.2.3.4/32
1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0
$ ip r del 1.2.3.4/32
$ ip r del 1.2.3.4/32 nhid 12
<both should work>
$ ip r del 1.2.3.4/32 dev dummy0
<should fail with ESRCH>
v2: addded more to patch 01's commit message
adjusted the test comment in patch 02
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a test which causes a WARNING on kernels which treat a
nexthop route like a normal route when comparing for deletion and a
device is specified. That is, a route is found but we hit a warning while
matching it. The warning is from fib_info_nh() in include/net/nexthop.h
because we run it on a fib_info with nexthop object. The call chain is:
inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a
nexthop fib_info and also with fc_oif set thus calling fib_info_nh on
the fib_info and triggering the warning).
Repro steps:
$ ip nexthop add id 12 via 172.16.1.3 dev veth1
$ ip route add 172.16.101.1/32 nhid 12
$ ip route delete 172.16.101.1/32 dev veth1
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
FRR folks have hit a kernel warning[1] while deleting routes[2] which is
caused by trying to delete a route pointing to a nexthop id without
specifying nhid but matching on an interface. That is, a route is found
but we hit a warning while matching it. The warning is from
fib_info_nh() in include/net/nexthop.h because we run it on a fib_info
with nexthop object. The call chain is:
inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a
nexthop fib_info and also with fc_oif set thus calling fib_info_nh on
the fib_info and triggering the warning). The fix is to not do any
matching in that branch if the fi has a nexthop object because those are
managed separately. I.e. we should match when deleting without nh spec and
should fail when deleting a nexthop route with old-style nh spec because
nexthop objects are managed separately, e.g.:
$ ip r show 1.2.3.4/32
1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0
$ ip r del 1.2.3.4/32
$ ip r del 1.2.3.4/32 nhid 12
<both should work>
$ ip r del 1.2.3.4/32 dev dummy0
<should fail with ESRCH>
[1]
[ 523.462226] ------------[ cut here ]------------
[ 523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460
[ 523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd
[ 523.462274] videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse
[ 523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P OE 5.16.18-200.fc35.x86_64 #1
[ 523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020
[ 523.462303] RIP: 0010:fib_nh_match+0x210/0x460
[ 523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff <0f> 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00
[ 523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286
[ 523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0
[ 523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380
[ 523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000
[ 523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031
[ 523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0
[ 523.462311] FS: 00007f245517c1c0(0000) GS:ffff9e492ed80000(0000) knlGS:0000000000000000
[ 523.462313] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 523.462313] CR2: 000055e5dfdd8268 CR3: 00000003ef488000 CR4: 0000000000350ee0
[ 523.462315] Call Trace:
[ 523.462316] <TASK>
[ 523.462320] fib_table_delete+0x1a9/0x310
[ 523.462323] inet_rtm_delroute+0x93/0x110
[ 523.462325] rtnetlink_rcv_msg+0x133/0x370
[ 523.462327] ? _copy_to_iter+0xb5/0x6f0
[ 523.462330] ? rtnl_calcit.isra.0+0x110/0x110
[ 523.462331] netlink_rcv_skb+0x50/0xf0
[ 523.462334] netlink_unicast+0x211/0x330
[ 523.462336] netlink_sendmsg+0x23f/0x480
[ 523.462338] sock_sendmsg+0x5e/0x60
[ 523.462340] ____sys_sendmsg+0x22c/0x270
[ 523.462341] ? import_iovec+0x17/0x20
[ 523.462343] ? sendmsg_copy_msghdr+0x59/0x90
[ 523.462344] ? __mod_lruvec_page_state+0x85/0x110
[ 523.462348] ___sys_sendmsg+0x81/0xc0
[ 523.462350] ? netlink_seq_start+0x70/0x70
[ 523.462352] ? __dentry_kill+0x13a/0x180
[ 523.462354] ? __fput+0xff/0x250
[ 523.462356] __sys_sendmsg+0x49/0x80
[ 523.462358] do_syscall_64+0x3b/0x90
[ 523.462361] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 523.462364] RIP: 0033:0x7f24552aa337
[ 523.462365] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 523.462366] RSP: 002b:00007fff7f05a838 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 523.462368] RAX: ffffffffffffffda RBX: 000000006245bf91 RCX: 00007f24552aa337
[ 523.462368] RDX: 0000000000000000 RSI: 00007fff7f05a8a0 RDI: 0000000000000003
[ 523.462369] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 523.462370] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000001
[ 523.462370] R13: 00007fff7f05ce08 R14: 0000000000000000 R15: 000055e5dfdd1040
[ 523.462373] </TASK>
[ 523.462374] ---[ end trace ba537bc16f6bf4ed ]---
[2] https://github.com/FRRouting/frr/issues/6412
Fixes: 4c7e8084fd46 ("ipv4: Plumb support for nexthop object in a fib_info")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL,
so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since
'select' does not follow any dependency chains.
Fixes kconfig warning and build errors:
WARNING: unmet direct dependencies detected for MICREL_PHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y]
ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info':
micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index'
ld: drivers/net/phy/micrel.o: in function `lan8814_probe':
micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Matt Johnston says:
====================
MCTP fixes
The following are fixes for the mctp core and mctp-i2c driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously the skb was allocated with headroom MCTP_HEADER_MAXLEN,
but that isn't sufficient if we are using devs that are not MCTP
specific.
This also adds a check that the smctp_halen provided to sendmsg for
extended addressing is the correct size for the netdev.
Fixes: 833ef3b91de6 ("mctp: Populate socket implementation")
Reported-by: Matthew Rinaldi <mjrinal@g.clemson.edu>
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
header_ops.create should return the length of the header,
instead mctp_i2c_head_create() returned 0.
This didn't cause any problem because the MCTP stack accepted
0 as success.
Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev_hard_header() returns the length of the header, so
we need to test for negative errors rather than non-zero.
Fixes: 889b7da23abf ("mctp: Add initial routing framework")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tony Nguyen says:
====================
ice-fixups
This series handles a handful of cleanups for the ice
driver. Ivan fixed a problem on the VSI during a release,
fixing a MAC address setting, and a broken IFF_ALLMULTI
handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Handling of all-multicast flag and associated multicast promiscuous
mode is broken in ice driver. When an user switches allmulticast
flag on or off the driver checks whether any VLANs are configured
over the interface (except default VLAN 0).
If any extra VLANs are registered it enables multicast promiscuous
mode for all these VLANs (including default VLAN 0) using
ICE_SW_LKUP_PROMISC_VLAN look-up type. In this situation all
multicast packets tagged with known VLAN ID or untagged are received
and multicast packets tagged with unknown VLAN ID ignored.
If no extra VLANs are registered (so only VLAN 0 exists) it enables
multicast promiscuous mode for VLAN 0 and uses ICE_SW_LKUP_PROMISC
look-up type. In this situation any multicast packets including
tagged ones are received.
The driver handles IFF_ALLMULTI in ice_vsi_sync_fltr() this way:
ice_vsi_sync_fltr() {
...
if (changed_flags & IFF_ALLMULTI) {
if (netdev->flags & IFF_ALLMULTI) {
if (vsi->num_vlans > 1)
ice_set_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS);
else
ice_set_promisc(..., ICE_MCAST_PROMISC_BITS);
} else {
if (vsi->num_vlans > 1)
ice_clear_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS);
else
ice_clear_promisc(..., ICE_MCAST_PROMISC_BITS);
}
}
...
}
The code above depends on value vsi->num_vlan that specifies number
of VLANs configured over the interface (including VLAN 0) and
this is problem because that value is modified in NDO callbacks
ice_vlan_rx_add_vid() and ice_vlan_rx_kill_vid().
Scenario 1:
1. ip link set ens7f0 allmulticast on
2. ip link add vlan10 link ens7f0 type vlan id 10
3. ip link set ens7f0 allmulticast off
4. ip link set ens7f0 allmulticast on
[1] In this scenario IFF_ALLMULTI is enabled and the driver calls
ice_set_promisc(..., ICE_MCAST_PROMISC_BITS) that installs
multicast promisc rule with non-VLAN look-up type.
[2] Then VLAN with ID 10 is added and vsi->num_vlan incremented to 2
[3] Command switches IFF_ALLMULTI off and the driver calls
ice_clear_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS) but this
call is effectively NOP because it looks for multicast promisc
rules for VLAN 0 and VLAN 10 with VLAN look-up type but no such
rules exist. So the all-multicast remains enabled silently
in hardware.
[4] Command tries to switch IFF_ALLMULTI on and the driver calls
ice_clear_promisc(..., ICE_MCAST_PROMISC_BITS) but this call
fails (-EEXIST) because non-VLAN multicast promisc rule already
exists.
Scenario 2:
1. ip link add vlan10 link ens7f0 type vlan id 10
2. ip link set ens7f0 allmulticast on
3. ip link add vlan20 link ens7f0 type vlan id 20
4. ip link del vlan10 ; ip link del vlan20
5. ip link set ens7f0 allmulticast off
[1] VLAN with ID 10 is added and vsi->num_vlan==2
[2] Command switches IFF_ALLMULTI on and driver installs multicast
promisc rules with VLAN look-up type for VLAN 0 and 10
[3] VLAN with ID 20 is added and vsi->num_vlan==3 but no multicast
promisc rules is added for this new VLAN so the interface does
not receive MC packets from VLAN 20
[4] Both VLANs are removed but multicast rule for VLAN 10 remains
installed so interface receives multicast packets from VLAN 10
[5] Command switches IFF_ALLMULTI off and because vsi->num_vlan is 1
the driver tries to remove multicast promisc rule for VLAN 0
with non-VLAN look-up that does not exist.
All-multicast looks disabled from user point of view but it
is partially enabled in HW (interface receives all multicast
packets either untagged or tagged with VLAN ID 10)
To resolve these issues the patch introduces these changes:
1. Adds handling for IFF_ALLMULTI to ice_vlan_rx_add_vid() and
ice_vlan_rx_kill_vid() callbacks. So when VLAN is added/removed
and IFF_ALLMULTI is enabled an appropriate multicast promisc
rule for that VLAN ID is added/removed.
2. In ice_vlan_rx_add_vid() when first VLAN besides VLAN 0 is added
so (vsi->num_vlan == 2) and IFF_ALLMULTI is enabled then look-up
type for existing multicast promisc rule for VLAN 0 is updated
to ICE_MCAST_VLAN_PROMISC_BITS.
3. In ice_vlan_rx_kill_vid() when last VLAN besides VLAN 0 is removed
so (vsi->num_vlan == 1) and IFF_ALLMULTI is enabled then look-up
type for existing multicast promisc rule for VLAN 0 is updated
to ICE_MCAST_PROMISC_BITS.
4. Both ice_vlan_rx_{add,kill}_vid() have to run under ICE_CFG_BUSY
bit protection to avoid races with ice_vsi_sync_fltr() that runs
in ice_service_task() context.
5. Bit ICE_VSI_VLAN_FLTR_CHANGED is use-less and can be removed.
6. Error messages added to ice_fltr_*_vsi_promisc() helper functions
to avoid them in their callers
7. Small improvements to increase readability
Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 2ccc1c1ccc671b ("ice: Remove excess error variables") merged
the usage of 'status' and 'err' variables into single one in
function ice_set_mac_address(). Unfortunately this causes
a regression when call of ice_fltr_add_mac() returns -EEXIST because
this return value does not indicate an error in this case but
value of 'err' remains to be -EEXIST till the end of the function
and is returned to caller.
Prior mentioned commit this does not happen because return value of
ice_fltr_add_mac() was stored to 'status' variable first and
if it was -EEXIST then 'err' remains to be zero.
Fix the problem by reset 'err' to zero when ice_fltr_add_mac()
returns -EEXIST.
Fixes: 2ccc1c1ccc671b ("ice: Remove excess error variables")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VSI is set as default forwarding one when promisc mode is set for
PF interface, when PF is switched to switchdev mode or when VF
driver asks to enable allmulticast or promisc mode for the VF
interface (when vf-true-promisc-support priv flag is off).
The third case is buggy because in that case VSI associated with
VF remains as default one after VF removal.
Reproducer:
1. Create VF
echo 1 > sys/class/net/ens7f0/device/sriov_numvfs
2. Enable allmulticast or promisc mode on VF
ip link set ens7f0v0 allmulticast on
ip link set ens7f0v0 promisc on
3. Delete VF
echo 0 > sys/class/net/ens7f0/device/sriov_numvfs
4. Try to enable promisc mode on PF
ip link set ens7f0 promisc on
Although it looks that promisc mode on PF is enabled the opposite
is true because ice_vsi_sync_fltr() responsible for IFF_PROMISC
handling first checks if any other VSI is set as default forwarding
one and if so the function does not do anything. At this point
it is not possible to enable promisc mode on PF without re-probe
device.
To resolve the issue this patch clear default forwarding VSI
during ice_vsi_release() when the VSI to be released is the default
one.
Fixes: 01b5e89aab49 ("ice: Add VF promiscuous support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit a1ff94c2973c43bc1e2677ac63ebb15b1d1ff846.
Switch drivers that don't implement ->port_change_mtu() will cause the
DSA master to remain with an MTU of 1500, since we've deleted the other
code path. In turn, this causes a regression for those systems, where
MTU-sized traffic can no longer be terminated.
Revert the change taking into account the fact that rtnl_lock() is now
taken top-level from the callers of dsa_master_setup() and
dsa_master_teardown(). Also add a comment in order for it to be
absolutely clear why it is still needed.
Fixes: a1ff94c2973c ("net: dsa: stop updating master MTU from master.c")
Reported-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a use-after-free when using page_pool with page fragments. We
encountered this problem during normal RX in the hns3 driver:
(1) Initially we have three descriptors in the RX queue. The first one
allocates PAGE1 through page_pool, and the other two allocate one
half of PAGE2 each. Page references look like this:
RX_BD1 _______ PAGE1
RX_BD2 _______ PAGE2
RX_BD3 _________/
(2) Handle RX on the first descriptor. Allocate SKB1, eventually added
to the receive queue by tcp_queue_rcv().
(3) Handle RX on the second descriptor. Allocate SKB2 and pass it to
netif_receive_skb():
netif_receive_skb(SKB2)
ip_rcv(SKB2)
SKB3 = skb_clone(SKB2)
SKB2 and SKB3 share a reference to PAGE2 through
skb_shinfo()->dataref. The other ref to PAGE2 is still held by
RX_BD3:
SKB2 ---+- PAGE2
SKB3 __/ /
RX_BD3 _________/
(3b) Now while handling TCP, coalesce SKB3 with SKB1:
tcp_v4_rcv(SKB3)
tcp_try_coalesce(to=SKB1, from=SKB3) // succeeds
kfree_skb_partial(SKB3)
skb_release_data(SKB3) // drops one dataref
SKB1 _____ PAGE1
\____
SKB2 _____ PAGE2
/
RX_BD3 _________/
In skb_try_coalesce(), __skb_frag_ref() takes a page reference to
PAGE2, where it should instead have increased the page_pool frag
reference, pp_frag_count. Without coalescing, when releasing both
SKB2 and SKB3, a single reference to PAGE2 would be dropped. Now
when releasing SKB1 and SKB2, two references to PAGE2 will be
dropped, resulting in underflow.
(3c) Drop SKB2:
af_packet_rcv(SKB2)
consume_skb(SKB2)
skb_release_data(SKB2) // drops second dataref
page_pool_return_skb_page(PAGE2) // drops one pp_frag_count
SKB1 _____ PAGE1
\____
PAGE2
/
RX_BD3 _________/
(4) Userspace calls recvmsg()
Copies SKB1 and releases it. Since SKB3 was coalesced with SKB1, we
release the SKB3 page as well:
tcp_eat_recv_skb(SKB1)
skb_release_data(SKB1)
page_pool_return_skb_page(PAGE1)
page_pool_return_skb_page(PAGE2) // drops second pp_frag_count
(5) PAGE2 is freed, but the third RX descriptor was still using it!
In our case this causes IOMMU faults, but it would silently corrupt
memory if the IOMMU was disabled.
Change the logic that checks whether pp_recycle SKBs can be coalesced.
We still reject differing pp_recycle between 'from' and 'to' SKBs, but
in order to avoid the situation described above, we also reject
coalescing when both 'from' and 'to' are pp_recycled and 'from' is
cloned.
The new logic allows coalescing a cloned pp_recycle SKB into a page
refcounted one, because in this case the release (4) will drop the right
reference, the one taken by skb_try_coalesce().
Fixes: 53e0961da1c7 ("page_pool: add frag page recycling support in page pool")
Suggested-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in commit 048939088220
("vrf: add mac header for tunneled packets when sniffer is attached")
an Ethernet header was cooked for traffic originating from tunnel devices.
However, the header is added based on whether the mac_header is unset
and ignores cases where the device doesn't expose a mac header to upper
layers, such as in ip tunnels like ipip and gre.
Traffic originating from such devices still appears garbled when capturing
on the vrf device.
Fix by observing whether the original device exposes a header to upper
layers, similar to the logic done in af_packet.
In addition, skb->mac_len needs to be adjusted after adding the Ethernet
header for the skb_push/pull() surrounding dev_queue_xmit_nit() to work
on these packets.
Fixes: 048939088220 ("vrf: add mac header for tunneled packets when sniffer is attached")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The memory size of tls_ctx->rx.iv for AES128-CCM is 12 setting in
tls_set_sw_offload(). The return value of crypto_aead_ivsize()
for "ccm(aes)" is 16. So memcpy() require 16 bytes from 12 bytes
memory space will trigger slab-out-of-bounds bug as following:
==================================================================
BUG: KASAN: slab-out-of-bounds in decrypt_internal+0x385/0xc40 [tls]
Read of size 16 at addr ffff888114e84e60 by task tls/10911
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0x5e/0x5db
? decrypt_internal+0x385/0xc40 [tls]
kasan_report+0xab/0x120
? decrypt_internal+0x385/0xc40 [tls]
kasan_check_range+0xf9/0x1e0
memcpy+0x20/0x60
decrypt_internal+0x385/0xc40 [tls]
? tls_get_rec+0x2e0/0x2e0 [tls]
? process_rx_list+0x1a5/0x420 [tls]
? tls_setup_from_iter.constprop.0+0x2e0/0x2e0 [tls]
decrypt_skb_update+0x9d/0x400 [tls]
tls_sw_recvmsg+0x3c8/0xb50 [tls]
Allocated by task 10911:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
tls_set_sw_offload+0x2eb/0xa20 [tls]
tls_setsockopt+0x68c/0x700 [tls]
__sys_setsockopt+0xfe/0x1b0
Replace the crypto_aead_ivsize() with prot->iv_size + prot->salt_size
when memcpy() iv value in TLS_1_3_VERSION scenario.
Fixes: f295b3ae9f59 ("net/tls: Add support of AES128-CCM based ciphers")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After rx/tx ring buffer size is changed, kernel panic occurs when
it acts XDP_TX or XDP_REDIRECT.
When tx/rx ring buffer size is changed(ethtool -G), sfc driver
reallocates and reinitializes rx and tx queues and their buffer
(tx_queue->buffer).
But it misses reinitializing xdp queues(efx->xdp_tx_queues).
So, while it is acting XDP_TX or XDP_REDIRECT, it uses the uninitialized
tx_queue->buffer.
A new function efx_set_xdp_channels() is separated from efx_set_channels()
to handle only xdp queues.
Splat looks like:
BUG: kernel NULL pointer dereference, address: 000000000000002a
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#4] PREEMPT SMP NOPTI
RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc]
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.17.0+ #55 e8beeee8289528f11357029357cf
Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80
RSP: 0018:ffff92f121e45c60 EFLAGS: 00010297
RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc]
RAX: 0000000000000040 RBX: ffff92ea506895c0 RCX: ffffffffc0330870
RDX: 0000000000000001 RSI: 00000001139b10ce RDI: ffff92ea506895c0
RBP: ffffffffc0358a80 R08: 00000001139b110d R09: 0000000000000000
R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040
R13: 0000000000000018 R14: 00000001139b10ce R15: ffff92ea506895c0
FS: 0000000000000000(0000) GS:ffff92f121ec0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80
CR2: 000000000000002a CR3: 00000003e6810004 CR4: 00000000007706e0
RSP: 0018:ffff92f121e85c60 EFLAGS: 00010297
PKRU: 55555554
RAX: 0000000000000040 RBX: ffff92ea50689700 RCX: ffffffffc0330870
RDX: 0000000000000001 RSI: 00000001145a90ce RDI: ffff92ea50689700
RBP: ffffffffc0358a80 R08: 00000001145a910d R09: 0000000000000000
R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040
R13: 0000000000000018 R14: 00000001145a90ce R15: ffff92ea50689700
FS: 0000000000000000(0000) GS:ffff92f121e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000002a CR3: 00000003e6810005 CR4: 00000000007706e0
PKRU: 55555554
Call Trace:
<IRQ>
efx_xdp_tx_buffers+0x12b/0x3d0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
__efx_rx_packet+0x5c3/0x930 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
efx_rx_packet+0x28c/0x2e0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
efx_ef10_ev_process+0x5f8/0xf40 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
? enqueue_task_fair+0x95/0x550
efx_poll+0xc4/0x360 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]
Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 67512a8cf5a7 ("MIPS: Avoid macro redefinitions") changed how the
MIPS register macros were defined, in order to allow the code to compile
under LLVM/Clang.
The MIPS CRC32 code however wasn't updated accordingly, causing a build
bug when using a MIPS32r6 toolchain without CRC support.
Update the CRC32 code to use the macros correctly, to fix the build
failures.
Fixes: 67512a8cf5a7 ("MIPS: Avoid macro redefinitions")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
pgprot_decrypted is used by AMD SME systems to allow access to memory
that was set to not encrypted using set_memory_decrypted. That only
happens for dma-direct memory as the IOMMU solves the addressing
challenges for the encryption bit using its own remapping.
Move the pgprot_decrypted call out of dma_pgprot which is also used
by the IOMMU mappings and into dma-direct so that it is only used with
memory that was set decrypted.
Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP")
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
|
|
This reverts commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40.
The touchpad present in the Dell Precision 7550 and 7750 laptops
reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However,
the device is not a clickpad, it is a touchpad with physical buttons.
In order to fix this issue, a quirk for the device was introduced in
libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:
[Precision 7x50 Touchpad]
MatchBus=i2c
MatchUdevType=touchpad
MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50*
AttrInputPropDisable=INPUT_PROP_BUTTONPAD
However, because of the change introduced in 37ef4c19b4 ("Input: clear
BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped
anymore breaking the device right click button and making impossible to
workaround it in user space.
In order to avoid breakage on other present or future devices, revert
the patch causing the issue.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Before this commit, VolumeDirty will be cleared first in
writeback if 'dirsync' or 'sync' is not enabled. If the power
is suddenly cut off after cleaning VolumeDirty but other
updates are not written, the exFAT filesystem will not be able
to detect the power failure in the next mount.
And VolumeDirty will be set again but not cleared when updating
the parent directory. It means that BootSector will be written at
least once in each write-back, which will shorten the life of the
device.
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
The Linux kernel exfat driver currently unconditionally strips
trailing periods '.' from path components. This isdone intentionally,
loosely following Windows behaviour and specifications
which state:
#exFAT
The concatenated file name has the same set of illegal characters as
other FAT-based file systems (see Table 31).
#FAT
...
Leading and trailing spaces in a long name are ignored.
Leading and embedded periods are allowed in a name and are stored in
the long name. Trailing periods are ignored.
Note: Leading and trailing space ' ' characters are currently retained
by Linux kernel exfat, in conflict with the above specification.
On Windows 10, trailing and leading space ' ' characters are stripped
from the filenames.
Some implementations, such as fuse-exfat, don't perform path trailer
removal. When mounting images which contain trailing-dot paths, these
paths are unreachable, e.g.:
+ mount.exfat-fuse /dev/zram0 /mnt/test/
FUSE exfat 1.3.0
+ cd /mnt/test/
+ touch fuse_created_dots... ' fuse_created_spaces '
+ ls -l
total 0
-rwxrwxrwx 1 root 0 0 Aug 18 09:45 ' fuse_created_spaces '
-rwxrwxrwx 1 root 0 0 Aug 18 09:45 fuse_created_dots...
+ cd /
+ umount /mnt/test/
+ mount -t exfat /dev/zram0 /mnt/test
+ cd /mnt/test
+ ls -l
ls: cannot access 'fuse_created_dots...': No such file or directory
total 0
-rwxr-xr-x 1 root 0 0 Aug 18 09:45 ' fuse_created_spaces '
-????????? ? ? ? ? ? fuse_created_dots...
+ touch kexfat_created_dots... ' kexfat_created_spaces '
+ ls -l
ls: cannot access 'fuse_created_dots...': No such file or directory
total 0
-rwxr-xr-x 1 root 0 0 Aug 18 09:45 ' fuse_created_spaces '
-rwxr-xr-x 1 root 0 0 Aug 18 09:45 ' kexfat_created_spaces '
-????????? ? ? ? ? ? fuse_created_dots...
-rwxr-xr-x 1 root 0 0 Aug 18 09:45 kexfat_created_dots
+ cd /
+ umount /mnt/test/
This commit adds "keep_last_dots" mount option that controls whether or
not trailing periods '.' are stripped
from path components during file lookup or file creation.
This mount option can be used to access
paths with trailing periods and disallow creating files with names with
trailing periods. E.g. continuing from the previous example:
+ mount -t exfat -o keep_last_dots /dev/zram0 /mnt/test
+ cd /mnt/test
+ ls -l
total 0
-rwxr-xr-x 1 root 0 0 Aug 18 10:32 ' fuse_created_spaces '
-rwxr-xr-x 1 root 0 0 Aug 18 10:32 ' kexfat_created_spaces '
-rwxr-xr-x 1 root 0 0 Aug 18 10:32 fuse_created_dots...
-rwxr-xr-x 1 root 0 0 Aug 18 10:32 kexfat_created_dots
+ echo > kexfat_created_dots_again...
sh: kexfat_created_dots_again...: Invalid argument
Link: https://bugzilla.suse.com/show_bug.cgi?id=1188964
Link: https://lore.kernel.org/linux-fsdevel/003b01d755e4$31fb0d80$95f12880$
@samsung.com/
Link: https://docs.microsoft.com/en-us/windows/win32/fileio/exfat-specification
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vasant Karasulli <vkarasulli@suse.de>
Co-developed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
As of 93917ad50972 ("RISC-V: Add support for restartable sequence") we
have support for restartable sequences, which default to enabled. These
select MEMBARRIER, so disabling it is now redundant.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
As of 3938d5a2f936 ("riscv: default to CONFIG_RISCV_SBI_V01=n") we no
longer default to enabling SBI-0.1 support, so these dependent configs
no longer have any effect. Remove them to avoid clutter.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Debugfs console_log uses devm memory (e.g. debug_info in
cros_ec_console_log_poll()). However, lifecycles of device and debugfs
are independent. An use-after-free issue is observed if userland
program operates the debugfs after the memory has been freed.
The call trace:
do_raw_spin_lock
_raw_spin_lock_irqsave
remove_wait_queue
ep_unregister_pollwait
ep_remove
do_epoll_ctl
A Python example to reproduce the issue:
... import select
... p = select.epoll()
... f = open('/sys/kernel/debug/cros_scp/console_log')
... p.register(f, select.POLLIN)
... p.poll(1)
[(4, 1)] # 4=fd, 1=select.POLLIN
[ shutdown cros_scp at the point ]
... p.poll(1)
[(4, 16)] # 4=fd, 16=select.POLLHUP
... p.unregister(f)
An use-after-free issue raises here. It called epoll_ctl with
EPOLL_CTL_DEL which in turn to use the workqueue in the devm (i.e.
log_wq).
Detaches log reader's workqueue from devm to make sure it is persistent
even if the device has been removed.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Link: https://lore.kernel.org/r/20220209051130.386175-1-tzungbi@google.com
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
cros_ec_trace.h defined 5 tracing events, 2 for cros_ec_proto and
3 for cros_ec_sensorhub_ring.
These 2 files are in different kernel modules, the traces are defined
twice in the kernel which leads to problem enabling only some traces.
Move sensorhub traces from cros_ec_trace.h to cros_ec_sensorhub_trace.h
and enable them only in cros_ec_sensorhub kernel module.
Check we can now enable any single traces: without this patch,
we can only enable all sensorhub traces or none.
Fixes: d453ceb6549a ("platform/chrome: sensorhub: Add trace events for sample")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220122001301.640337-1-gwendal@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
This subdir no longer exists: it was there to document some of the
quirks and paths forward for handling them, but those have been dealt
with as of Atish's recent patch set.
Fixes: 23b1f18326ec ("Documentation: riscv: Remove the old documentation")
Link: https://lore.kernel.org/linux-next/20220329133412.591d6882@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
[Palmer: commit text]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Devicetree support (for testing)
- Various cleanups and fixes: UBD, port_user, uml_mconsole
- Maintainer update
* tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: run_helper: Write error message to kernel log on exec failure on host
um: port_user: Improve error handling when port-helper is not found
um: port_user: Allow setting path to port-helper using UML_PORT_HELPER envvar
um: port_user: Search for in.telnetd in PATH
um: clang: Strip out -mno-global-merge from USER_CFLAGS
docs: UML: Mention telnetd for port channel
um: Remove unused timeval_to_ns() function
um: Fix uml_mconsole stop/go
um: Cleanup syscall_handler_t definition/cast, fix warning
uml: net: vector: fix const issue
um: Fix WRITE_ZEROES in the UBD Driver
um: Migrate vector drivers to NAPI
um: Fix order of dtb unflatten/early init
um: fix and optimize xor select template for CONFIG64 and timetravel mode
um: Document dtb command line option
lib/logic_iomem: correct fallback config references
um: Remove duplicated include in syscalls_64.c
MAINTAINERS: Update UserModeLinux entry
|
