summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-19Merge tag 'sound-4.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "We've got slightly more fixes than wished, but heading to a good shape. Most of changes are about HD-audio fixes, one for a buggy code that went into 4.13, and another for avoiding a crash due to buggy BIOS. Apart from HD-audio, a sequencer core change that is only for UP config (which must be pretty rare nowadays), and a USB-audio quirk as usual" * tag 'sound-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix incorrect TLV callback check introduced during set_fs() removal ALSA: hda: Remove superfluous '-' added by printk conversion ALSA: hda: Abort capability probe at invalid register read ALSA: seq: Enable 'use' locking in all configurations ALSA: usb-audio: Add native DSD support for Pro-Ject Pre Box S2 Digital
2017-10-19Merge tag 'renesas-fixes-for-v4.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Pull "Renesas ARM Based SoC Fixes for v4.14" from Simon Horman: Add 12V regulator to backlight allowing the power supply for the backlight to be found. * tag 'renesas-fixes-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: salvator-common: add 12V regulator to backlight
2017-10-19ARM: ux500: Fix regression while init PM domainsUlf Hansson
The commit afece3ab9a36 ("PM / Domains: Add time accounting to various genpd states") causes a boot regression for ux500. The problem occurs when the ux500 machine code calls pm_genpd_init(), which since the above change triggers a call to ktime_get(). More precisely, because ux500 initializes PM domains in the init_IRQ() phase of the boot, timekeeping has not yet been initialized. Fix the problem by moving the initialization of the PM domains to after timekeeping has been initialized. Fixes: afece3ab9a36 ("PM / Domains: Add time accounting to various genpd..") Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-19ARM: dts: fix PCLK name on Gemini and MOXA ARTLinus Walleij
These platforms provide a clock to their watchdog, in each case this is the peripheral clock (PCLK), so explicitly name the clock in the device tree. Take this opportunity to add the "faraday,ftwdt010" compatible as fallback to the watchdog IP blocks. Cc: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-19Merge tag 'reset-fixes-for-4.14-2' of git://git.pengutronix.de/git/pza/linux ↵Arnd Bergmann
into fixes Pull "Reset controller fixes for v4.14" from Philipp Zabel: Fix SoCFPGA reset controller for 64-bit systems. This patch removes the assumption that BITS_PER_LONG is 32, which is not the case on Stratix10. * tag 'reset-fixes-for-4.14-2' of git://git.pengutronix.de/git/pza/linux: reset: socfpga: fix for 64-bit compilation
2017-10-19Merge tag 'v4.14-rockchip-dts64fixes-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Pull "Rockchip dts64 Fixes for 4.14 part 2" from Heiko Stübner: The vqmmc voltages on rk3399 pose a risk for the chip if they exceed 3.0V, so they got fixed to not be at 3.3V And Arnd found a typo in the recently added iommu nodes. * tag 'v4.14-rockchip-dts64fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: fix typo in iommu nodes arm64: dts: rockchip: correct vqmmc voltage for rk3399 platforms
2017-10-19Merge tag 'imx-fixes-4.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 4.14" from Shawn Guo: - Fix the legacy PCI interrupt numbers for i.MX7. The numbers were wrongly coded in an inverted order than what Reference Manual tells. It causes problem for PCI devices using legacy interrupt. * tag 'imx-fixes-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7d: Invert legacy PCI irq mapping
2017-10-19Merge tag 'mvebu-fixes-4.14-2' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Pull "mvebu fixes for 4.14 (part 2)" from Gregory CLEMENT Two device tree related fixes: - One on Armada 38x using a other compatible string for I2C in order to cover an errata. - One for Armada 7K/8K fixing a typo on interrupt-map property for PCIe leading to fail PME and AER root port service initialization And the last one for the mbus fixing the window size calculation when it exceed 32bits * tag 'mvebu-fixes-4.14-2' of git://git.infradead.org/linux-mvebu: bus: mbus: fix window size calculation for 4GB windows ARM: dts: Fix I2C repeated start issue on Armada-38x arm64: dts: marvell: fix interrupt-map property for Armada CP110 PCIe controller
2017-10-19Merge tag 'at91-fixes2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Fixes: second batch for 4.14: - one DT phy address fix for the new sama5d27 som1 ek - two DT ADC patches that were forgotten while moving to hardware triggers for sama5d2 (iio changes already applied) * tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: dts: at91: sama5d2: add ADC hw trigger edge type ARM: dts: at91: sama5d2_xplained: enable ADTRG pin ARM: dts: at91: at91-sama5d27_som1: fix PHY ID
2017-10-19Merge tag 'arm-soc/for-4.14/devicetree-fixes' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into fixes Pull "Broadcom devicetree fixes for 4.14" from Florian Fainelli: This pull request contains Broadcom ARM-based SoC Device Tree fixes for 4.14, please pull the following: - Loic fixes the console path on the Raspberry Pi 3 which was not correctly set and would cause all sorts of confusion between the Bluetooth controller and the kernel console * tag 'arm-soc/for-4.14/devicetree-fixes' of http://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix console path on RPi3
2017-10-19sctp: do not peel off an assoc from one netns to another oneXin Long
Now when peeling off an association to the sock in another netns, all transports in this assoc are not to be rehashed and keep use the old key in hashtable. As a transport uses sk->net as the hash key to insert into hashtable, it would miss removing these transports from hashtable due to the new netns when closing the sock and all transports are being freeed, then later an use-after-free issue could be caused when looking up an asoc and dereferencing those transports. This is a very old issue since very beginning, ChunYu found it with syzkaller fuzz testing with this series: socket$inet6_sctp() bind$inet6() sendto$inet6() unshare(0x40000000) getsockopt$inet_sctp6_SCTP_GET_ASSOC_ID_LIST() getsockopt$inet_sctp6_SCTP_SOCKOPT_PEELOFF() This patch is to block this call when peeling one assoc off from one netns to another one, so that the netns of all transport would not go out-sync with the key in hashtable. Note that this patch didn't fix it by rehashing transports, as it's difficult to handle the situation when the tuple is already in use in the new netns. Besides, no one would like to peel off one assoc to another netns, considering ipaddrs, ifaces, etc. are usually different. Reported-by: ChunYu Wang <chunwang@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19Merge branch 'bpf-Fix-for-BPF-devmap-percpu-allocation-splat'David S. Miller
Daniel Borkmann says: ==================== bpf: Fix for BPF devmap percpu allocation splat The set fixes a splat in devmap percpu allocation when we alloc the flush bitmap. Patch 1 is a prerequisite for the fix in patch 2, patch 1 is rather small, so if this could be routed via -net, for example, with Tejun's Ack that would be good. Patch 3 gets rid of remaining PCPU_MIN_UNIT_SIZE checks, which are percpu allocator internals and should not be used. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19bpf: do not test for PCPU_MIN_UNIT_SIZE before percpu allocationsDaniel Borkmann
PCPU_MIN_UNIT_SIZE is an implementation detail of the percpu allocator. Given we support __GFP_NOWARN now, lets just let the allocation request fail naturally instead. The two call sites from BPF mistakenly assumed __GFP_NOWARN would work, so no changes needed to their actual __alloc_percpu_gfp() calls which use the flag already. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19bpf: fix splat for illegal devmap percpu allocationDaniel Borkmann
It was reported that syzkaller was able to trigger a splat on devmap percpu allocation due to illegal/unsupported allocation request size passed to __alloc_percpu(): [ 70.094249] illegal size (32776) or align (8) for percpu allocation [ 70.094256] ------------[ cut here ]------------ [ 70.094259] WARNING: CPU: 3 PID: 3451 at mm/percpu.c:1365 pcpu_alloc+0x96/0x630 [...] [ 70.094325] Call Trace: [ 70.094328] __alloc_percpu_gfp+0x12/0x20 [ 70.094330] dev_map_alloc+0x134/0x1e0 [ 70.094331] SyS_bpf+0x9bc/0x1610 [ 70.094333] ? selinux_task_setrlimit+0x5a/0x60 [ 70.094334] ? security_task_setrlimit+0x43/0x60 [ 70.094336] entry_SYSCALL_64_fastpath+0x1a/0xa5 This was due to too large max_entries for the map such that we surpassed the upper limit of PCPU_MIN_UNIT_SIZE. It's fine to fail naturally here, so switch to __alloc_percpu_gfp() and pass __GFP_NOWARN instead. Fixes: 11393cc9b9be ("xdp: Add batching support to redirect map") Reported-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Shankara Pailoor <sp3485@columbia.edu> Reported-by: Richard Weinberger <richard@nod.at> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19mm, percpu: add support for __GFP_NOWARN flagDaniel Borkmann
Add an option for pcpu_alloc() to support __GFP_NOWARN flag. Currently, we always throw a warning when size or alignment is unsupported (and also dump stack on failed allocation requests). The warning itself is harmless since we return NULL anyway for any failed request, which callers are required to handle anyway. However, it becomes harmful when panic_on_warn is set. The rationale for the WARN() in pcpu_alloc() is that it can be tracked when larger than supported allocation requests are made such that allocations limits can be tweaked if warranted. This makes sense for in-kernel users, however, there are users of pcpu allocator where allocation size is derived from user space requests, e.g. when creating BPF maps. In these cases, the requests should fail gracefully without throwing a splat. The current work-around was to check allocation size against the upper limit of PCPU_MIN_UNIT_SIZE from call-sites for bailing out prior to a call to pcpu_alloc() in order to avoid throwing the WARN(). This is bad in multiple ways since PCPU_MIN_UNIT_SIZE is an implementation detail, and having the checks on call-sites only complicates the code for no good reason. Thus, lets fix it generically by supporting the __GFP_NOWARN flag that users can then use with calling the __alloc_percpu_gfp() helper instead. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19Merge branch 'ena-fixes'David S. Miller
Netanel Belgazal says: ==================== ENA ethernet driver bug fixes Some fixes for ENA ethernet driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19net: ena: fix wrong max Tx/Rx queues on ethtoolNetanel Belgazal
ethtool ena_get_channels() expose the max number of queues as the max number of queues ENA supports (128 queues) and not the actual number of created queues. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19net: ena: fix rare kernel crash when bar memory remap failsNetanel Belgazal
This failure is rare and only found on testing where deliberately fail devm_ioremap() [ 451.170464] ena 0000:04:00.0: failed to remap regs bar 451.170549] Workqueue: pciehp-1 pciehp_power_thread [ 451.170551] task: ffff88085a5f2d00 task.stack: ffffc9000756c000 [ 451.170552] RIP: 0010:devm_iounmap+0x2d/0x40 [ 451.170553] RSP: 0018:ffffc9000756fac0 EFLAGS: 00010282 [ 451.170554] RAX: 00000000fffffffe RBX: 0000000000000000 RCX: 0000000000000000 [ 451.170555] RDX: ffffffff813a7e00 RSI: 0000000000000282 RDI: 0000000000000282 [ 451.170556] RBP: ffffc9000756fac8 R08: 00000000fffffffe R09: 00000000000009b7 [ 451.170557] R10: 0000000000000005 R11: 00000000000009b6 R12: ffff880856c9d0a0 [ 451.170558] R13: ffffc9000f5c90c0 R14: ffff880856c9d0a0 R15: 0000000000000028 [ 451.170559] FS: 0000000000000000(0000) GS:ffff88085f400000(0000) knlGS:0000000000000000 [ 451.170560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 451.170561] CR2: 00007f169038b000 CR3: 0000000001c09000 CR4: 00000000003406f0 [ 451.170562] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 451.170562] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 451.170563] Call Trace: [ 451.170572] ena_release_bars.isra.48+0x34/0x60 [ena] [ 451.170574] ena_probe+0x144/0xd90 [ena] [ 451.170579] ? ida_simple_get+0x98/0x100 [ 451.170585] ? kernfs_next_descendant_post+0x40/0x50 [ 451.170591] local_pci_probe+0x45/0xa0 [ 451.170592] pci_device_probe+0x157/0x180 [ 451.170599] driver_probe_device+0x2a8/0x460 [ 451.170600] __device_attach_driver+0x7e/0xe0 [ 451.170602] ? driver_allows_async_probing+0x30/0x30 [ 451.170603] bus_for_each_drv+0x68/0xb0 [ 451.170605] __device_attach+0xdd/0x160 [ 451.170607] device_attach+0x10/0x20 [ 451.170610] pci_bus_add_device+0x4f/0xa0 [ 451.170611] pci_bus_add_devices+0x39/0x70 [ 451.170613] pciehp_configure_device+0x96/0x120 [ 451.170614] pciehp_enable_slot+0x1b3/0x290 [ 451.170616] pciehp_power_thread+0x3b/0xb0 [ 451.170622] process_one_work+0x149/0x360 [ 451.170623] worker_thread+0x4d/0x3c0 [ 451.170626] kthread+0x109/0x140 [ 451.170627] ? rescuer_thread+0x380/0x380 [ 451.170628] ? kthread_park+0x60/0x60 [ 451.170632] ret_from_fork+0x25/0x30 Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19net: ena: reduce the severity of some printoutsNetanel Belgazal
Decrease log level of checksum errors as these messages can be triggered remotely by bad packets. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19can: gs_usb: fix busy loop if no more TX context is availableWolfgang Grandegger
If sending messages with no cable connected, it quickly happens that there is no more TX context available. Then "gs_can_start_xmit()" returns with "NETDEV_TX_BUSY" and the upper layer does retry immediately keeping the CPU busy. To fix that issue, I moved "atomic_dec(&dev->active_tx_urbs)" from "gs_usb_xmit_callback()" to the TX done handling in "gs_usb_receive_bulk_callback()". Renaming "active_tx_urbs" to "active_tx_contexts" and moving it into "gs_[alloc|free]_tx_context()" would also make sense. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19can: esd_usb2: Fix can_dlc value for received RTR, framesStefan Mätje
The dlc member of the struct rx_msg contains also the ESD_RTR flag to mark received RTR frames. Without the fix the can_dlc value for received RTR frames would always be set to 8 by get_can_dlc() instead of the received value. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19can: af_can: can_pernet_init(): add missing error handling for kzalloc ↵Marc Kleine-Budde
returning NULL This patch adds the missing check and error handling for out-of-memory situations, when kzalloc cannot allocate memory. Fixes: cb5635a36776 ("can: complete initial namespace support") Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19can: af_can: do not access proto_tab directly use rcu_access_pointer insteadMarc Kleine-Budde
"proto_tab" is a RCU protected array, when directly accessing the array, sparse throws these warnings: CHECK /srv/work/frogger/socketcan/linux/net/can/af_can.c net/can/af_can.c:115:14: error: incompatible types in comparison expression (different address spaces) net/can/af_can.c:795:17: error: incompatible types in comparison expression (different address spaces) net/can/af_can.c:816:9: error: incompatible types in comparison expression (different address spaces) This patch fixes the problem by using rcu_access_pointer() and annotating "proto_tab" array as __rcu. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19can: bcm: check for null sk before deferencing it via the call to sock_netColin Ian King
The assignment of net via call sock_net will dereference sk. This is performed before a sanity null check on sk, so there could be a potential null dereference on the sock_net call if sk is null. Fix this by assigning net after the sk null check. Also replace the sk == NULL with the more usual !sk idiom. Detected by CoverityScan CID#1431862 ("Dereference before null check") Fixes: 384317ef4187 ("can: network namespace support for CAN_BCM protocol") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19can: flexcan: fix p1010 state transition issueZHU Yi (ST-FIR/ENG1-Zhu)
Enable FLEXCAN_QUIRK_BROKEN_WERR_STATE and FLEXCAN_QUIRK_BROKEN_PERR_STATE for p1010 to report correct state transitions. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-stable <stable@vger.kernel.org> # >= v4.11 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19can: flexcan: fix i.MX28 state transition issueZHU Yi (ST-FIR/ENG1-Zhu)
Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for i.MX28 to report correct state transitions, especially to error passive. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Cc: linux-stable <stable@vger.kernel.org> # >= v4.11 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19can: flexcan: fix i.MX6 state transition issueZHU Yi (ST-FIR/ENG1-Zhu)
Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for i.MX6 to report correct state transitions. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-stable <stable@vger.kernel.org> # >= v4.11 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19can: flexcan: implement error passive state quirkZHU Yi (ST-FIR/ENG1-Zhu)
Add FLEXCAN_QUIRK_BROKEN_PERR_STATE for better description of the missing error passive interrupt quirk. Error interrupt flooding may happen if the broken error state quirk fix is enabled. For example, in case there is singled out node on the bus and the node sends a frame, then error interrupt flooding happens and will not stop because the node cannot go to bus off. The flooding will stop after another node connected to the bus again. If high bitrate configured on the low end system, then the flooding may causes performance issue, hence, this patch mitigates this by: 1. disable error interrupt upon error passive state transition 2. re-enable error interrupt upon error warning state transition 3. disable/enable error interrupt upon error active state transition depends on FLEXCAN_QUIRK_BROKEN_WERR_STATE In this way, the driver is still able to report correct state transitions without additional latency. When there are bus problems, flooding of error interrupts is limited to the number of frames required to change state from error warning to error passive if the core has [TR]WRN_INT connected (FLEXCAN_QUIRK_BROKEN_WERR_STATE is not enabled), otherwise, the flooding is limited to the number of frames required to change state from error active to error passive. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-stable <stable@vger.kernel.org> # >= v4.11 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19can: flexcan: rename legacy error state quirkZHU Yi (ST-FIR/ENG1-Zhu)
Rename FLEXCAN_QUIRK_BROKEN_ERR_STATE to FLEXCAN_QUIRK_BROKEN_WERR_STATE for better description of the missing [TR]WRN_INT quirk. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-stable <stable@vger.kernel.org> # >= v4.11 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19can: flexcan: fix state transition regressionZHU Yi (ST-FIR/ENG1-Zhu)
Update state upon any interrupt to report correct state transitions in case the flexcan core enabled the broken error state quirk fix. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-stable <stable@vger.kernel.org> # >= v4.11 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19usb: hub: Allow reset retry for USB2 devices on connect bounceMathias Nyman
If the connect status change is set during reset signaling, but the status remains connected just retry port reset. This solves an issue with connecting a 90W HP Thunderbolt 3 dock with a Lenovo Carbon x1 (5th generation) which causes a 30min loop of a high speed device being re-discovererd before usb ports starts working. [...] [ 389.023845] usb 3-1: new high-speed USB device number 55 using xhci_hcd [ 389.491841] usb 3-1: new high-speed USB device number 56 using xhci_hcd [ 389.959928] usb 3-1: new high-speed USB device number 57 using xhci_hcd [...] This is caused by a high speed device that doesn't successfully go to the enabled state after the second port reset. Instead the connection bounces (connected, with connect status change), bailing out completely from enumeration just to restart from scratch. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716332 Cc: Stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19Merge tag 'usb-serial-4.14-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.14-rc6 Here's a new metro-usb device id for another bar-code scanner. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-10-19parisc: Fix detection of nonsynchronous cr16 cycle countersHelge Deller
For CPUs which have an unknown or invalid CPU location (physical location) assume that their cycle counters aren't syncronized across CPUs. Signed-off-by: Helge Deller <deller@gmx.de> Fixes: c8c3735997a3 ("parisc: Enhance detection of synchronous cr16 clocksources") Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Helge Deller <deller@gmx.de>
2017-10-19parisc: Export __cmpxchg_u64 unconditionallyGuenter Roeck
__cmpxchg_u64 is built and used outside CONFIG_64BIT and thus needs to be exported. This fixes the following build error seen when building parisc:allmodconfig. ERROR: "__cmpxchg_u64" [drivers/net/ethernet/intel/i40e/i40e.ko] undefined! Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de>
2017-10-19parisc: Fix double-word compare and exchange in LWS code on 32-bit kernelsJohn David Anglin
As discussed on the debian-hppa list, double-wordcompare and exchange operations fail on 32-bit kernels. Looking at the code, I realized that the ",ma" completer does the wrong thing in the "ldw,ma 4(%r26), %r29" instruction. This increments %r26 and causes the following store to write to the wrong location. Note by Helge Deller: The patch applies cleanly to stable kernel series if this upstream commit is merged in advance: f4125cfdb300 ("parisc: Avoid trashing sr2 and sr3 in LWS code"). Signed-off-by: John David Anglin <dave.anglin@bell.net> Tested-by: Christoph Biedl <debian.axhn@manchmal.in-ulm.de> Fixes: 89206491201c ("parisc: Implement new LWS CAS supporting 64 bit operations.") Cc: stable@vger.kernel.org # 3.13+ Signed-off-by: Helge Deller <deller@gmx.de>
2017-10-19locking/static_keys: Improve uninitialized key warningBorislav Petkov
Right now it says: static_key_disable_cpuslocked used before call to jump_label_init ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:161 static_key_disable_cpuslocked+0x68/0x70 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.0-rc5+ #1 Hardware name: SGI.COM C2112-4GP3/X10DRT-P-Series, BIOS 2.0a 05/09/2016 task: ffffffff81c0e480 task.stack: ffffffff81c00000 RIP: 0010:static_key_disable_cpuslocked+0x68/0x70 RSP: 0000:ffffffff81c03ef0 EFLAGS: 00010096 ORIG_RAX: 0000000000000000 RAX: 0000000000000041 RBX: ffffffff81c32680 RCX: ffffffff81c5cbf8 RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000002 RBP: ffff88807fffd240 R08: 726f666562206465 R09: 0000000000000136 R10: 0000000000000000 R11: 696e695f6c656261 R12: ffffffff82158900 R13: ffffffff8215f760 R14: 0000000000000001 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff883f7f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88807ffff000 CR3: 0000000001c09000 CR4: 00000000000606b0 Call Trace: static_key_disable+0x16/0x20 start_kernel+0x15a/0x45d ? load_ucode_intel_bsp+0x11/0x2d secondary_startup_64+0xa5/0xb0 Code: 48 c7 c7 a0 15 cf 81 e9 47 53 4b 00 48 89 df e8 5f fc ff ff eb e8 48 c7 c6 \ c0 97 83 81 48 c7 c7 d0 ff a2 81 31 c0 e8 c5 9d f5 ff <0f> ff eb a7 0f ff eb \ b0 e8 eb a2 4b 00 53 48 89 fb e8 42 0e f0 but it doesn't tell me which key it is. So dump the key's name too: static_key_disable_cpuslocked(): static key 'virt_spin_lock_key' used before call to jump_label_init() And that makes pinpointing which key is causing that a lot easier. include/linux/jump_label.h | 14 +++++++------- include/linux/jump_label_ratelimit.h | 6 +++--- kernel/jump_label.c | 14 +++++++------- 3 files changed, 17 insertions(+), 17 deletions(-) Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171018152428.ffjgak4o25f7ept6@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-19Merge tag 'drm-intel-fixes-2017-10-18-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Fix for stable: - Fix DDI translation tables for BDW (Chris). Critical fix: - Fix GPU Hang on GVT (Changbin). Other fixes: - Fix eviction when GGTT is idle (Chris). - CNL PLL fixes (Rodrigo). - Fix pwrite into shmemfs (Chris). - Mask bits for BXT and CHV L3 Workaround WaProgramL3SqcReg1Default (Oscar). * tag 'drm-intel-fixes-2017-10-18-1' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Use a mask when applying WaProgramL3SqcReg1Default drm/i915: Report -EFAULT before pwrite fast path into shmemfs drm/i915/cnl: Fix PLL initialization for HDMI. drm/i915/cnl: Fix PLL mapping. drm/i915: Use bdw_ddi_translations_fdi for Broadwell drm/i915: Fix eviction when the GGTT is idle but full drm/i915/gvt: Fix GPU hang after reusing vGPU instance across different guest OS
2017-10-19commoncap: move assignment of fs_ns to avoid null pointer dereferenceColin Ian King
The pointer fs_ns is assigned from inode->i_ib->s_user_ns before a null pointer check on inode, hence if inode is actually null we will get a null pointer dereference on this assignment. Fix this by only dereferencing inode after the null pointer check on inode. Detected by CoverityScan CID#1455328 ("Dereference before null check") Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: stable@vger.kernel.org Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-19Merge commit 'tags/keys-fixes-20171018' into fixes-v4.14-rc5James Morris
2017-10-18Input: stmfts - fix setting ABS_MT_POSITION_* maximum sizeChanwoo Choi
The commit 78bcac7b2ae1e ("Input: add support for the STMicroelectronics FingerTip touchscreen) used the 'touchscreen_parse_properties()' helper function in order to get the value of common properties. But, commit 78bcac7b2ae1e didn't set the capability of ABS_MT_POSITION_* before calling touchscreen_parse_properties(). In result, the max_x and max_y of 'struct touchscreen_properties' were not set. Fixes: 78bcac7b2ae1e ("Input: add support for the STMicroelectronics FingerTip touchscreen") Cc: stable@vger.kernel.org Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-18Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreenJeff Lance
Step config setting for 5 wire touchscreen is incorrect for Y coordinates. It was broken while we moved to DT. If you look close at the offending commit bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable"), the change was: - STEPCONFIG_XNP | STEPCONFIG_YPN; + ts_dev->bit_xn | ts_dev->bit_yp; while bit_xn = STEPCONFIG_XNN and bit_yp = STEPCONFIG_YNN. Not quite the same. Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable") Signed-off-by: Jeff Lance <j-lance1@ti.com> [vigneshr@ti.com: Rebase to v4.14-rc1] Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Merge branch 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Single amdgpu regression fix. * 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux: Revert "drm/amdgpu: discard commands of killed processes"
2017-10-18Convert fs/*/* to SB_I_VERSIONMatthew Garrett
[AV: in addition to the fix in previous commit] Signed-off-by: Matthew Garrett <mjg59@google.com> Cc: David Howells <dhowells@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-10-19Merge branch 'linux-4.14' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
some nouveau fixes. * 'linux-4.14' of git://github.com/skeggsb/linux: drm/nouveau/fbcon: fix oops without fbdev emulation drm/nouveau/kms/nv50: fix oops during DP IRQ handling on non-MST boards drm/nouveau/bsp/g92: disable by default drm/nouveau/mmu: flush tlbs before deleting page tables
2017-10-19drm/nouveau/fbcon: fix oops without fbdev emulationPavel Roskin
This is similar to an earlier commit 52dfcc5ccfbb ("drm/nouveau: fix for disabled fbdev emulation"), but protects all occurrences of helper.fbdev in the source. I see oops in nouveau_fbcon_accel_save_disable() called from nouveau_fbcon_set_suspend_work() on Linux 3.13 when CONFIG_DRM_FBDEV_EMULATION option is disabled. Signed-off-by: Pavel Roskin <plroskin@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-10-18Merge tag 'xfs-4.14-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Darrick Wong: - fix some more CONFIG_XFS_RT related build problems - fix data loss when writeback at eof races eofblocks gc and loses - invalidate page cache after fs finishes a dio write - remove dirty page state when invalidating pages so releasepage does the right thing when handed a dirty page * tag 'xfs-4.14-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: move two more RT specific functions into CONFIG_XFS_RT xfs: trim writepage mapping to within eof fs: invalidate page cache after end_io() in dio completion xfs: cancel dirty pages on invalidation
2017-10-18Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Three small fixes: - A fix for skd, it was using kfree() to free a structure allocate with kmem_cache_alloc(). - Stable fix for nbd, fixing a regression using the normal ioctl based tools. - Fix for a previous fix in this series, that fixed up inconsistencies between buffered and direct IO" * 'for-linus' of git://git.kernel.dk/linux-block: fs: Avoid invalidation in interrupt context in dio_complete() nbd: don't set the device size until we're connected skd: Use kmem_cache_free
2017-10-18USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor()Alan Stern
Andrey used the syzkaller fuzzer to find an out-of-bounds memory access in usb_get_bos_descriptor(). The code wasn't checking that the next usb_dev_cap_header structure could fit into the remaining buffer space. This patch fixes the error and also reduces the bNumDeviceCaps field in the header to match the actual number of capabilities found, in cases where there are fewer than expected. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18Revert "drm/amdgpu: discard commands of killed processes"Alex Deucher
This causes instability in piglit. It's fixed in drm-next with: 515c6faf85970af529953ec137b4b6fcb3272e25 1650c14b459ff9c85767746f1ef795a780653128 214a91e6bfabaa6cbfa692df8732000aab050795 29d253553559dba919315be847f4f2cce29edd42 79867462634836ee5c39a2cdf624719feeb189bd This reverts commit 6af0883ed9770cf9b0a4f224c91481484cd1b025. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-18drm/i915: Use a mask when applying WaProgramL3SqcReg1DefaultOscar Mateo
Otherwise we are blasting other bits in GEN8_L3SQCREG1 that might be important (although we probably aren't at the moment because 0 seems to be the default for all the other bits). v2: Extra parentheses (Michel) Fixes: 050fc46 ("drm/i915:bxt: implement WaProgramL3SqcReg1DefaultForPerf") Fixes: 450174f ("drm/i915/chv: Tune L3 SQC credits based on actual latencies") Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1508271945-14961-1-git-send-email-oscar.mateo@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 930a784d02339be437fec07b3bb7213bde0ed53b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>