summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-12-03ASoC: zoom2: Remove HS mux GPIO handling to avoid kernel crash due to BUG_ON()Peter Ujfalusi
The machine driver try to use GPIO15 of twl4030 for HS MUX which supposed to select between TWL's HSOL/R and tlv320aic3254's HPL/R. The TWL's GPIO allocated dynamically so the (OMAP_MAX_GPIO_LINES + 15) is no longer valid GPIO number causing a kernel crash due to BUG_ON() Also the current machine driver supports only TWL audio currently: there is no need to control the GPIO. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-03ASoC: da7210: Remove unnecessary regmap_exit callSachin Kamat
Use of devm_regmap_init_spi does not require an explicit regmap_exit call. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-03ASoC: wm5102: Add support for configuring LHPF coefficientsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-03ASoC: adsp: Set DSP clock rate to SYSCLK rateMark Brown
For simplicity always run the DSP at the SYSCLK rate. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-03ASoC: adsp: Keep ADSP2 memory powered off when not in useMark Brown
Turn off the ADSP memory when we aren't using it, saving a small amount of power. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-02ASoC: atmel-pcm: dma support based on pcm dmaengineBo Shen
Specify overrun bit in interrupt mask Add dmaengine specific routines Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [voice.shen@atmel.com: adapt to soc dmaengine framework] Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-02ASoC: atmel-pcm: split into two fileBo Shen
This patch is split original atmel-pcm.c into new atmel-pcm.c and atmel-pcm-pdc.c two files. The new atmel-pcm.c is the share routine while will be used for pdc or dma transfer. Using SND_ATMEL_SOC_PDC to select using PDC for audio transfer Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-02ASoC: wm5102: Correct base address for Y regionMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-02ASoC: max9768: Use devm_regmap_init_i2c()Sachin Kamat
devm_regmap_init_i2c() is device managed and makes error handling and code cleanup simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-29ASoC: arizona: Add parenthesesMark Brown
Some compiler versions complain. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: wm_adsp: Set the core enable as well as start bit for ADSP2Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: wm2200: Remove empty labelsSachin Kamat
Removed unnecessary labels probably left out of some previous cleanup. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: Samsung: Get I2S src_clk from clock alias id.Padmavathi Venna
As the I2S src clks are registered with clkdev using generic connection id, driver can get the clk name using generic id. So the variable representing the array of rclk src clks is deleted. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: omap-abe-twl6040: Use "ti,jack-detection" DT property as booleanPeter Ujfalusi
Handle the jack detection inforamtion as bool from devicetree. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: wm5102: Enable DVFS support for the DSPMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28Merge branch 'topic/adsp' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona
2012-11-28ASoC: lm49453: Use devm_regmap_init_i2c()Sachin Kamat
devm_regmap_init_i2c() is device managed and makes error handling and code cleanup simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: da7210: Use devm_regmap_init_i2c()Sachin Kamat
devm_regmap_init_i2c() is device managed and makes error handling and code cleanup simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: ak4535: Use devm_regmap_init_i2c()Sachin Kamat
devm_regmap_init_i2c() is device managed and makes error handling and code cleanup simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: wm8400: Use devm_regulator_bulk_getSachin Kamat
devm_regulator_bulk_get() is device managed and makes error handling and code cleanup simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: wm8350: Use devm_regulator_bulk_getSachin Kamat
devm_regulator_bulk_get() is device managed and makes error handling and code cleanup simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: wm_adsp: Enable DVFS for ADSP2Mark Brown
Some ADSP devices can make use of DVFS to optimise power consumption depending on the operating frequency of the DSP core. Implement support for this in the generic ADSP code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28mfd: arizona: Register haptics devicesMark Brown
Both WM5102 and WM5110 support haptics, register the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: wm5110: Implement haptics supportMark Brown
Provide a haptics widget for use by the haptics driver and expose the DAPM context for it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: wm5102: Implement haptics supportMark Brown
Provide a haptics widget for use by the haptics driver and expose the DAPM context for it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28Input - arizona-haptics: Add driver haptics module on Arizona CODECsMark Brown
The Arizona CODECs contain a haptics module providing vibration feedback support. Implement basic support for this, providing simple start/stop and signal magnitude control. Since the output path for haptics is routed through the CODEC audio routing it is modelled as a signal generator within ASoC, the haptics driver calls DAPM to start and stop the output drivers. An appropriate output path must be configured via ALSA to connect the haptics source to the correct output. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28mfd: arizona: Allow the CODEC DAPM context to be accessed elsewhereMark Brown
Some other device functions need to integrate with signal sources in the audio portion (primarily for haptics) so allow CODEC to export the DAPM context by pointing to it from the core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-28ASoC: arizona: Record FLL setting when disablingMark Brown
Otherwise we skip reenables. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27Merge tag 'v3.7-rc7' into asoc-wm2200Mark Brown
Linux 3.7-rc7
2012-11-27Merge tag 'v3.7-rc7' into asoc-ux500Mark Brown
Linux 3.7-rc7
2012-11-27ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform supportTony Lindgren
We cannot include any plat or mach headers for the multiplatform support. Fix the issue by defining local mcbsp_omap1(). Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27ASoC: fsl: fix miscompilation of snd-soc-imx-pcmLothar Waßmann
Hi Mark, thanks your insisting on a better description for the patch, I found a more appropriate solution for the problem: Compiling the SoC Audio driver for Freescale i.MX as a module (CONFIG_SND_SOC_IMX_PCM=m) results in a non-functional sound driver indicated by the error message: | imx-sgtl5000 sound.1: platform imx-pcm-audio not registered | imx-sgtl5000 sound.1: snd_soc_register_card failed (-517) | platform sound.1: Driver imx-sgtl5000 requests probe deferral instead of the message: | imx-sgtl5000 sound.1: sgtl5000 <-> 63fcc000.ssi mapping ok that is to be expected upon loading the snd-soc-imx-pcm.ko module. The build log reveals, that the file imx-pcm-dma.o (or imx-pcm-fiq.o depending on the kernel configuration), which should be linked together with imx-pcm.o into snd-imx-pcm.ko, is not being compiled in this case. The make rules for these files shows that the target object imx-pcm.o is assigned to the variable snd-soc-imx-pcm-y while imx-pcm-{dma,fiq}.o are added to to snd-soc-imx-pcm-$(CONFIG_SND_SOC_IMX_PCM_DMA) and snd-soc-imx-pcm-$(CONFIG_SND_SOC_IMX_PCM_FIQ) which resolve to snd-soc-imx-pcm-m in this case. According to Documentation/kbuild/modules.txt: |When the module is built from multiple sources, an additional line is |needed listing the files: | | <module_name>-y := <src1>.o <src2>.o ... Thus the type of the config variables CONFIG_SND_SOC_IMX_PCM_DMA and CONFIG_SND_SOC_IMX_PCM_FIQ should be 'bool' instead of 'tristate' to resolve to 'y' when selected. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27ASoC: mxs-saif: export mxs_saif_put_mclk,mxs_saif_get_mclkLothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27ASoC: fsl: fix miscompilation of snd-soc-imx-pcmLothar Waßmann
Due to a broken make rule, sound/soc/fsl/imx-pcm-dma.c or sound/soc/fsl/imx-pcm-fiq.c (whatever is selected via Kconfig) will not be compiled into imx-pcm.o when building as module, i.e.: CONFIG_SND_SOC_IMX_PCM=m CONFIG_SND_SOC_IMX_PCM_DMA=m resulting in a non-functional sound driver. This gives the error messages: | imx-sgtl5000 sound.1: platform imx-pcm-audio not registered | imx-sgtl5000 sound.1: snd_soc_register_card failed (-517) | platform sound.1: Driver imx-sgtl5000 requests probe deferral when loading the driver instead of what's to be expected: | imx-sgtl5000 sound.1: sgtl5000 <-> 63fcc000.ssi mapping ok Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27ASoC: pcm: Report error code when we fail to init platformMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27ASoC: wm0010: Ignore interrupts in power down modeMark Brown
The device should not be generating interrupts when it does not have power so ignore incoming interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27ASoC: arizona: Suppress noop FLL updatesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27ASoC: wm5102: Add missing routes for ASRC inputsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27ASoC: wm2000: Get the CODEC pointer from the widgetMark Brown
Don't rely on the kcontrol for robustness reasons, the widget mechanism is what the framework uses. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27ASoC: arizona: Support higher clock ratesMark Brown
Some devices support higher clock rates, allow users to select these. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-25Linux 3.7-rc7v3.7-rc7Linus Torvalds
2012-11-25Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc EEH bugfixes from Benjamin Herrenschmidt. Two one-liner fixes for the new EEH code. * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/eeh: Do not invalidate PE properly powerpc/pseries: Fix oops with MSIs when missing EEH PEs
2012-11-25Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Three issues fixed accross the field: - Some functions that were recently outlined as part of a preemption fix were causing problems with function tracing. - The recently merged in-kernel MPI library uses very outdated headers that contain MIPS-specific code which won't build on with gcc 4.4 or newer. - The MIPS non-NUMA memory initialization was making only a very half-baked attempt at merging adjacent memory ranges. This kept the code simple enough but is now causing issues with kexec." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MPI: Fix compilation on MIPS with GCC 4.4 and newer MIPS: Fix crash that occurs when function tracing is enabled MIPS: Merge overlapping bootmem ranges
2012-11-26powerpc/eeh: Do not invalidate PE properlyGavin Shan
While the EEH does recovery on the specific PE that has PCI errors, the PCI devices belonging to the PE will be removed and the PE will be marked as invalid since we still need the information stored in the PE. We only invalidate the PE when it doesn't have associated EEH devices and valid child PEs. However, the code used to check that is wrong. The patch fixes that. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-24Merge tag 'sound-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound build error fix from Takashi Iwai: "Only a single commit for fixing the build error without CONFIG_PM in hda driver." * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix build without CONFIG_PM
2012-11-24ALSA: hda - Fix build without CONFIG_PMTakashi Iwai
I forgot this again... codec->in_pm is in #ifdef CONFIG_PM Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-23Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 arch fixes from Peter Anvin: "Here is a collection of fixes for 3.7-rc7. This is a superset of tglx' earlier pull request." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64: Fix ordering of CFI directives and recent ASM_CLAC additions x86, microcode, AMD: Add support for family 16h processors x86-32: Export kernel_stack_pointer() for modules x86-32: Fix invalid stack address while in softirq x86, efi: Fix processor-specific memcpy() build error x86: remove dummy long from EFI stub x86, mm: Correct vmflag test for checking VM_HUGETLB x86, amd: Disable way access filter on Piledriver CPUs x86/mce: Do not change worker's running cpu in cmci_rediscover(). x86/ce4100: Fix PCI configuration register access for devices without interrupts x86/ce4100: Fix reboot by forcing the reboot method to be KBD x86/ce4100: Fix pm_poweroff MAINTAINERS: Update email address for Robert Richter x86, microcode_amd: Change email addresses, MAINTAINERS entry MAINTAINERS: Change Boris' email address EDAC: Change Boris' email address x86, AMD: Change Boris' email address
2012-11-23Merge tag 'for-linus-20121123' of git://git.infradead.org/mtd-2.6Linus Torvalds
Pull MTD fixes from David Woodhouse: "The most important part of this is that it fixes a regression in Samsung NAND chip detection, introduced by some rework which went into 3.7. The initial fix wasn't quite complete, so it's in two parts. In fact the first part is committed twice (Artem committed his own copy of the same patch) and I've merged Artem's tree into mine which already had that fix. I'd have recommitted that to make it somewhat cleaner, but figured by this point in the release cycle it was better to merge *exactly* the commits which have been in linux-next. If I'd recommitted, I'd also omit the sparse warning fix. But it's there, and it's harmless — just marking one function as 'static' in onenand code. This also includes a couple more fixes for stable: an AB-BA deadlock in JFFS2, and an invalid range check in slram." * tag 'for-linus-20121123' of git://git.infradead.org/mtd-2.6: mtd: nand: fix Samsung SLC detection regression mtd: nand: fix Samsung SLC NAND identification regression jffs2: Fix lock acquisition order bug in jffs2_write_begin mtd: onenand: Make flexonenand_set_boundary static mtd: slram: invalid checking of absolute end address mtd: ofpart: Fix incorrect NULL check in parse_ofoldpart_partitions() mtd: nand: fix Samsung SLC NAND identification regression
2012-11-23Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull device tree regression fix from Grant Likely: "Simple build regression fix for DT device drivers on Sparc. An earlier change had masked out the of_iomap() helper on SPARC." * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: of/address: sparc: Declare of_iomap as an extern function for sparc again
2012-11-23Merge tag 'pm-for-3.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management update from Rafael Wysocki: "Fix for an incorrect error condition check in device PM QoS code that may lead to an Oops from Guennadi Liakhovetski." * tag 'pm-for-3.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / QoS: fix wrong error-checking condition
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 22:57:00 +0000