| Age | Commit message (Collapse) | Author |
|---|
|
When exporting only one file system with fsid=0 on the server side, the
client alternately uses the ro/rw mount options to perform the mount
operation, and a new vfsmount is generated each time.
It can be reproduced as follows:
[root@localhost ~]# mount /dev/sda /mnt2
[root@localhost ~]# echo "/mnt2 *(rw,no_root_squash,fsid=0)" >/etc/exports
[root@localhost ~]# systemctl restart nfs-server
[root@localhost ~]# mount -t nfs -o ro,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o rw,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o ro,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount -t nfs -o rw,vers=4 127.0.0.1:/ /mnt/sdaa
[root@localhost ~]# mount | grep nfs4
127.0.0.1:/ on /mnt/sdaa type nfs4 (ro,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (rw,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (ro,relatime,vers=4.2,rsize=1048576,...
127.0.0.1:/ on /mnt/sdaa type nfs4 (rw,relatime,vers=4.2,rsize=1048576,...
[root@localhost ~]#
We expected that after mounting with the ro option, using the rw option to
mount again would return EBUSY, but the actual situation was not the case.
As shown above, when mounting for the first time, a superblock with the ro
flag will be generated, and at the same time, in do_new_mount_fc -->
do_add_mount, it detects that the superblock corresponding to the current
target directory is inconsistent with the currently generated one
(path->mnt->mnt_sb != newmnt->mnt.mnt_sb), and a new vfsmount will be
generated.
When mounting with the rw option for the second time, since no matching
superblock can be found in the fs_supers list, a new superblock with the
rw flag will be generated again. The superblock in use (ro) is different
from the newly generated superblock (rw), and a new vfsmount will be
generated again.
When mounting with the ro option for the third time, the superblock (ro)
is found in fs_supers, the superblock in use (rw) is different from the
found superblock (ro), and a new vfsmount will be generated again.
We can switch between ro/rw through remount, and only one superblock needs
to be generated, thus avoiding the problem of repeated generation of
vfsmount caused by switching superblocks.
Furthermore, This can also resolve the issue described in the link.
Fixes: 275a5d24bf56 ("NFS: Error when mounting the same filesystem with different options")
Link: https://lore.kernel.org/all/20240604112636.236517-3-lilingfeng@huaweicloud.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, plus
documetation of a new device ID for the Qualcomm LABIBB driver.
There's a core fix for the rarely used current constraints and a fix
for the Qualcomm RPMH driver which had described only one of the two
voltage ranges that the hardware could control, creating a potential
incompatibility with the configuration left by firmware"
* tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Ignore unset max_uA constraints in current limit check
dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
regulator: qcom-rpmh: Update ranges for FTSMPS525
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- replace power_supply_register_no_ws() with power_supply_register()
and a new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
Power-supply drivers:
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc small cleanups and fixes"
* tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
power: reset: ep93xx: add AUXILIARY_BUS dependency
dt-bindings: power: reset: Convert mode-.* properties to array
power: supply: sc27xx: Fix battery detect GPIO probe
dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio
reset: keystone-reset: remove unused macros
power: supply: axp20x_battery: Use scaled iio_read_channel
power: supply: axp20x_usb_power: Use scaled iio_read_channel
power: supply: generic-adc-battery: change my gmail
power: supply: pmu_battery: Set power supply type to BATTERY
power: Switch back to struct platform_driver::remove()
power: supply: hwmon: move interface to private header
power: supply: rk817: Update battery capacity calibration
power: supply: rk817: stop updating info in suspend
power: supply: rt9471: Use IC status regfield to report real charger status
power: supply: rt9471: Fix wrong WDT function regfield declaration
dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example
power: supply: core: mark attribute arrays as ro_after_init
power: supply: core: unexport power_supply_property_is_writeable()
power: supply: core: use device mutex wrappers
power: supply: bq27xxx: Fix registers of bq27426
...
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
- additional checks to address issues identified by syzbot
- continuation of the transition from 'page' to 'folio'
* tag 'ntfs3_for_6.13' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Accumulated refactoring changes
fs/ntfs3: Switch to folio to release resources
fs/ntfs3: Add check in ntfs_extend_initialized_size
fs/ntfs3: Add more checks in mi_enum_attr (part 2)
fs/ntfs3: Equivalent transition from page to folio
fs/ntfs3: Fix case when unmarked clusters intersect with zone
fs/ntfs3: Fix warning in ni_fiemap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- If the start cluster of stream entry is invalid, treat it as the
empty directory
- Valid size of steam entry cannot be greater than data size. If
valid_size is invalid, use data_size
- Move Direct-IO alignment check to before extending the valid size
- Fix uninit-value issue reported by syzbot
- Optimize finding directory entry-set in write_inode, rename, unlink
* tag 'exfat-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: reduce FAT chain traversal
exfat: code cleanup for exfat_readdir()
exfat: remove argument 'p_dir' from exfat_add_entry()
exfat: move exfat_chain_set() out of __exfat_resolve_path()
exfat: add exfat_get_dentry_set_by_ei() helper
exfat: rename argument name for exfat_move_file and exfat_rename_file
exfat: remove unnecessary read entry in __exfat_rename()
exfat: fix file being changed by unaligned direct write
exfat: fix uninit-value in __exfat_get_dentry_set
exfat: fix out-of-bounds access of directory entries
|
|
Sasha reported a build issue in ipmr::
net/ipv4/ipmr.c:320:13: error: function 'ipmr_can_free_table' is not \
needed and will not be emitted \
[-Werror,-Wunneeded-internal-declaration]
320 | static bool ipmr_can_free_table(struct net *net)
Apparently clang is too smart with BUILD_BUG_ON_INVALID(), let's
fallback to a plain WARN_ON_ONCE().
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://qa-reports.linaro.org/lkft/sashal-linus-next/build/v6.11-25635-g6813e2326f1e/testrun/26111580/suite/build/test/clang-nightly-lkftconfig/details/
Fixes: 11b6e701bce9 ("ipmr: add debug check for mr table cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/ee75faa926b2446b8302ee5fc30e129d2df73b90.1732810228.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
To 2.52
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Unlock before returning if smb3_sync_session_ctx_passwords() fails.
Fixes: 7e654ab7da03 ("cifs: during remount, make sure passwords are in sync")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This fixes scenarios where remount can overwrite the only currently
working password, breaking reconnect.
We recently introduced a password2 field in both ses and ctx structs.
This was done so as to allow the client to rotate passwords for a mount
without any downtime. However, when the client transparently handles
password rotation, it can swap the values of the two password fields
in the ses struct, but not in smb3_fs_context struct that hangs off
cifs_sb. This can lead to a situation where a remount unintentionally
overwrites a working password in the ses struct.
In order to fix this, we first get the passwords in ctx struct
in-sync with ses struct, before replacing them with what the passwords
that could be passed as a part of remount.
Also, in order to avoid race condition between smb2_reconnect and
smb3_reconfigure, we make sure to lock session_mutex before changing
password and password2 fields of the ses structure.
Fixes: 35f834265e0d ("smb3: fix broken reconnect when password changing on the server by allowing password rotation")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fixes the case for example where the password specified on mount is a
recently expired password, but password2 is valid. Without this patch
this mount scenario would fail.
This patch introduces the following changes to support password rotation on
mount:
1. If an existing session is not found and the new session setup results in
EACCES, EKEYEXPIRED or EKEYREVOKED, swap password and password2 (if
available), and retry the mount.
2. To match the new mount with an existing session, add conditions to check
if a) password and password2 of the new mount and the existing session are
the same, or b) password of the new mount is the same as the password2 of
the existing session, and password2 of the new mount is the same as the
password of the existing session.
3. If an existing session is found, but needs reconnect, retry the session
setup after swapping password and password2 (if available), in case the
previous attempt results in EACCES, EKEYEXPIRED or EKEYREVOKED.
Cc: stable@vger.kernel.org
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The delayed snapshot capture worker can access the GPU or VRAM both of
which require a PM reference. Take a reference in this worker.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 4f04d07c0a94 ("drm/xe: Faster devcoredump")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241126174615.2665852-5-matthew.brost@intel.com
(cherry picked from commit 1c6878af115a4586a40d6c14d530fa9f93e0bd83)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
On some HW we want to avoid the host caching PTEs, since access from GPU
side can be incoherent. However here the special migrate object is
mapping PTEs which are written from the host and potentially cached. Use
XE_BO_FLAG_PAGETABLE to ensure that non-cached mapping is used, on
platforms where this matters.
Fixes: 7a060d786cc1 ("drm/xe/mtl: Map PPGTT as CPU:WC")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241126181259.159713-4-matthew.auld@intel.com
(cherry picked from commit febc689b27d28973cd02f667548a5dca383d859a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
XE_CACHE_WB must be converted into the per-platform pat index for that
particular caching mode, otherwise we are just encoding whatever happens
to be the value of that enum.
Fixes: e8babb280b5e ("drm/xe: Convert multiple bind ops into single job")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241126181259.159713-3-matthew.auld@intel.com
(cherry picked from commit f3dc9246f9c3cd5a7d8fd70cfd805bfc52214e2e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Currently in some testcases we can trigger:
xe 0000:03:00.0: [drm] Assertion `exec_queue_destroyed(q)` failed!
....
WARNING: CPU: 18 PID: 2640 at drivers/gpu/drm/xe/xe_guc_submit.c:1826 xe_guc_sched_done_handler+0xa54/0xef0 [xe]
xe 0000:03:00.0: [drm] *ERROR* GT1: DEREGISTER_DONE: Unexpected engine state 0x00a1, guc_id=57
Looking at a snippet of corresponding ftrace for this GuC id we can see:
162.673311: xe_sched_msg_add: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3
162.673317: xe_sched_msg_recv: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3
162.673319: xe_exec_queue_scheduling_disable: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0
162.674089: xe_exec_queue_kill: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0
162.674108: xe_exec_queue_close: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0
162.674488: xe_exec_queue_scheduling_done: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0
162.678452: xe_exec_queue_deregister: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa1, flags=0x0
It looks like we try to suspend the queue (opcode=3), setting
suspend_pending and triggering a disable_scheduling. The user then
closes the queue. However the close will also forcefully signal the
suspend fence after killing the queue, later when the G2H response for
disable_scheduling comes back we have now cleared suspend_pending when
signalling the suspend fence, so the disable_scheduling now incorrectly
tries to also deregister the queue. This leads to warnings since the queue
has yet to even be marked for destruction. We also seem to trigger
errors later with trying to double unregister the same queue.
To fix this tweak the ordering when handling the response to ensure we
don't race with a disable_scheduling that didn't actually intend to
perform an unregister. The destruction path should now also correctly
wait for any pending_disable before marking as destroyed.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3371
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241122161914.321263-6-matthew.auld@intel.com
(cherry picked from commit f161809b362f027b6d72bd998e47f8f0bad60a2e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Currently in some testcases we can trigger:
[drm] *ERROR* GT0: SCHED_DONE: Unexpected engine state 0x02b1, guc_id=8, runnable_state=0
[drm] *ERROR* GT0: G2H action 0x1002 failed (-EPROTO) len 3 msg 02 10 00 90 08 00 00 00 00 00 00 00
Looking at a snippet of corresponding ftrace for this GuC id we can see:
498.852891: xe_sched_msg_add: dev=0000:03:00.0, gt=0 guc_id=8, opcode=3
498.854083: xe_sched_msg_recv: dev=0000:03:00.0, gt=0 guc_id=8, opcode=3
498.855389: xe_exec_queue_kill: dev=0000:03:00.0, 5:0x1, gt=0, width=1, guc_id=8, guc_state=0x3, flags=0x0
498.855436: xe_exec_queue_lr_cleanup: dev=0000:03:00.0, 5:0x1, gt=0, width=1, guc_id=8, guc_state=0x83, flags=0x0
498.856767: xe_exec_queue_close: dev=0000:03:00.0, 5:0x1, gt=0, width=1, guc_id=8, guc_state=0x83, flags=0x0
498.862889: xe_exec_queue_scheduling_disable: dev=0000:03:00.0, 5:0x1, gt=0, width=1, guc_id=8, guc_state=0xa9, flags=0x0
498.863032: xe_exec_queue_scheduling_disable: dev=0000:03:00.0, 5:0x1, gt=0, width=1, guc_id=8, guc_state=0x2b9, flags=0x0
498.875596: xe_exec_queue_scheduling_done: dev=0000:03:00.0, 5:0x1, gt=0, width=1, guc_id=8, guc_state=0x2b9, flags=0x0
498.875604: xe_exec_queue_deregister: dev=0000:03:00.0, 5:0x1, gt=0, width=1, guc_id=8, guc_state=0x2b1, flags=0x0
499.074483: xe_exec_queue_deregister_done: dev=0000:03:00.0, 5:0x1, gt=0, width=1, guc_id=8, guc_state=0x2b1, flags=0x0
This looks to be the two scheduling_disable racing with each other, one
from the suspend (opcode=3) and then again during lr cleanup. While
those two operations are serialized, the G2H portion is not, therefore
when marking the queue as pending_disabled and then firing off the first
request, we proceed do the same again, however the first disable
response only fires after this which then clears the pending_disabled.
At this point the second comes back and is processed, however the
pending_disabled is no longer set, hence triggering the warning.
To fix this wait for pending_disabled when doing the lr cleanup and
calling disable_scheduling_deregister. Also do the same for all other
disable_scheduling callers.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3515
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <mattheq.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241122161914.321263-5-matthew.auld@intel.com
(cherry picked from commit ddb106d2120a0bf1c5ff87c71d059d193814da41)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Since both Xe2 and Xe3 platforms currently use the same set of graphics
IP feature flags, we associate the "graphics_xe2" structure with both IPs.
Update the name string on that IP structure to clarify this and avoid
confusion as Xe3 platforms start going into public CI.
Fixes: 800d75bf20ae ("drm/xe/xe3: Define Xe3 feature flags")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241125194838.1190599-2-matthew.d.roper@intel.com
(cherry picked from commit 4fe70f664a105391321c85b2af241001e8118d24)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A pile of driver specific quirks and fixes that came in since the merge
window. One of the AMD fixes is a bit broken for some systems, I'm
expecting an incremental change to fix that but it seems better overall
to merge the rest of the fixes.
There's also one small documentation update that seemed sensible to
apply now, pointing to the dapm-graph tool.
|
|
This hardware has ALC294 codec with speaker NID 0x17 and bass speaker
NID 0x15.
This patch removes DAC NID 0x06 (without volume control) from
the connection list for bass speaker NID 0x15. Both speaker PINs
are routed to DAC NID 0x03 with this change.
Link: https://github.com/alsa-project/alsa-ucm-conf/issues/467
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241128112145.3409492-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a new variant of arch_cmpxchg_niai8() which makes use of the flag
output constraint, which allows the compiler to generate slightly better
code. Also rename arch_cmpxchg_niai8() to arch_try_cmpxchg_niai8() which
reflects the purpose of the function and makes it consistent with other
"try" variants.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The load instruction used within arch_load_niai4() has a short displacement
and index register. Therefore use the R constraint to reflect this.
The used Q constraint does consider an index register.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use mvhhi instead of sth to write a zero to spinlocks. Compared to the
sth variant this avoids the load of zero to a register, and reduces
register pressure.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Both instructions in arch_spin_unlock() do not clobber the condition
code. Therefore remove the condition code clobber from the inline assembly.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Improve readability and use symbolic names.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Select HAVE_PREEMPT_DYNAMIC_KEY and add the pieces which are required to
support PREEMPT_DYNAMIC.
See commit 99cf983cc8bc ("sched/preempt: Add PREEMPT_DYNAMIC using static
keys") and commit 1b2d3451ee50 ("arm64: Support PREEMPT_DYNAMIC") for more
details.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In commit 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the
device") the zpci_exit_slot() was moved from zpci_device_reserved() to
zpci_release_device() with the intention of keeping the hotplug slot
around until the device is actually removed.
Now zpci_release_device() is only called once all references are
dropped. Since the zPCI subsystem only drops its reference once the
device is in the reserved state it follows that zpci_release_device()
must only deal with devices in the reserved state. Despite that it
contains code to tear down from both configured and standby state. For
the standby case this already includes the removal of the hotplug slot
so would cause a double removal if a device was ever removed in
either configured or standby state.
Instead of causing a potential double removal in a case that should
never happen explicitly WARN_ON() if a device in non-reserved state is
released and get rid of the dead code cases.
Fixes: 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the device")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Prior to commit 0467cdde8c43 ("s390/pci: Sort PCI functions prior to
creating virtual busses") the IOMMU was initialized and the device was
registered as part of zpci_create_device() with the struct zpci_dev
freed if either resulted in an error. With that commit this was moved
into a separate function called zpci_add_device().
While this new function logs when adding failed, it expects the caller
not to use and to free the struct zpci_dev on error. This difference
between it and zpci_create_device() was missed while changing the
callers and the incompletely initialized struct zpci_dev may get used in
zpci_scan_configured_device in the error path. This then leads to
a crash due to the device not being registered with the zbus. It was
also not freed in this case. Fix this by handling the error return of
zpci_add_device(). Since in this case the zdev was not added to the
zpci_list it can simply be discarded and freed. Also make this more
explicit by moving the kref_init() into zpci_add_device() and document
that zpci_zdev_get()/zpci_zdev_put() must be used after adding.
Cc: stable@vger.kernel.org
Fixes: 0467cdde8c43 ("s390/pci: Sort PCI functions prior to creating virtual busses")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add missing includes to fix this randconfig compile error:
All errors (new ones prefixed by >>):
In file included from mm/pagewalk.c:5:
In file included from include/linux/hugetlb.h:798:
>> arch/s390/include/asm/hugetlb.h:94:31: error: call to undeclared function 'is_pte_marker'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
94 | return huge_pte_none(pte) || is_pte_marker(pte);
| ^
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411281002.IPkRpIcR-lkp@intel.com/
Fixes: 487ef5d4d912 ("s390/mm: Add PTE_MARKER support for hugetlbfs mappings")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix typos and grammar where it improves readability.
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20241124230002.56058-1-leocstone@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Changed from reequires to require. A minute typo.
Signed-off-by: Vyshnav Ajith <puthen1977@gmail.com>
Link: https://patch.msgid.link/20241121221852.10754-1-puthen1977@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Due to an unsigned cast, adjtimex() returns the wrong offest when using
ADJ_MICRO and the offset is negative. In this case a small negative offset
returns approximately 4.29 seconds (~ 2^32/1000 milliseconds) due to the
unsigned cast of the negative offset.
This cast was added when the kernel internal struct timex was changed to
use type long long for the time offset value to address the problem of a
64bit/32bit division on 32bit systems.
The correct cast would have been (s32), which is correct as time_offset can
only be in the range of [INT_MIN..INT_MAX] because the shift constant used
for calculating it is 32. But that's non-obvious.
Remove the cast and use div_s64() to cure the issue.
[ tglx: Fix white space damage, use div_s64() and amend the change log ]
Fixes: ead25417f82e ("timex: use __kernel_timex internally")
Signed-off-by: Marcelo Dalmas <marcelo.dalmas@ge.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/SJ0P101MB03687BF7D5A10FD3C49C51E5F42E2@SJ0P101MB0368.NAMP101.PROD.OUTLOOK.COM
|
|
Paolo Abeni says:
====================
net: fix mcast RCU splats
This series addresses the RCU splat triggered by the forwarding
mroute tests.
The first patch does not address any specific issue, but makes the
following ones more clear. Patch 2 and 3 address the issue for ipv6 and
ipv4 respectively.
====================
Link: https://patch.msgid.link/cover.1732289799.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similar to the previous patch, plumb the RCU lock inside
the ipmr_get_table(), provided a lockless variant and apply
the latter in the few spots were the lock is already held.
Fixes: 709b46e8d90b ("net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT")
Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Several places call ip6mr_get_table() with no RCU nor RTNL lock.
Add RCU protection inside such helper and provide a lockless variant
for the few callers that already acquired the relevant lock.
Note that some users additionally reference the table outside the RCU
lock. That is actually safe as the table deletion can happen only
after all table accesses are completed.
Fixes: e2d57766e674 ("net: Provide compat support for SIOCGETMIFCNT_IN6 and SIOCGETSGCNT_IN6.")
Fixes: d7c31cbde4bc ("net: ip6mr: add RTM_GETROUTE netlink op")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The multicast route tables lifecycle, for both ipv4 and ipv6, is
protected by RCU using the RTNL lock for write access. In many
places a table pointer escapes the RCU (or RTNL) protected critical
section, but such scenarios are actually safe because tables are
deleted only at namespace cleanup time or just after allocation, in
case of default rule creation failure.
Tables freed at namespace cleanup time are assured to be alive for the
whole netns lifetime; tables freed just after creation time are never
exposed to other possible users.
Ensure that the free conditions are respected in ip{,6}mr_free_table, to
document the locking schema and to prevent future possible introduction
of 'table del' operation from breaking it.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The test.py should not be run separately. It should be run via run.sh,
which will do some sanity checks first. Move the test.py from TEST_PROGS
to TEST_FILES.
Reported-by: Maximilian Heyne <mheyne@amazon.de>
Closes: https://lore.kernel.org/netdev/20241122150129.GB18887@dev-dsk-mheyne-1b-55676e6a.eu-west-1.amazon.com
Fixes: 3ade6ce1255e ("selftests: rds: add testing infrastructure")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20241124073243.847932-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Offset into the page should also be considered while calculating a physical
address for struct dma_debug_entry. page_to_phys() just shifts the value
PAGE_SHIFT bits to the left so offset part is zero-filled.
An example (wrong) debug assertion failure with CONFIG_DMA_API_DEBUG
enabled which is observed during systemd boot process after recent
dma-debug changes:
DMA-API: e1000 0000:00:03.0: cacheline tracking EEXIST, overlapping mappings aren't supported
WARNING: CPU: 4 PID: 941 at kernel/dma/debug.c:596 add_dma_entry
CPU: 4 UID: 0 PID: 941 Comm: ip Not tainted 6.12.0+ #288
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:add_dma_entry kernel/dma/debug.c:596
Call Trace:
<TASK>
debug_dma_map_page kernel/dma/debug.c:1236
dma_map_page_attrs kernel/dma/mapping.c:179
e1000_alloc_rx_buffers drivers/net/ethernet/intel/e1000/e1000_main.c:4616
...
Found by Linux Verification Center (linuxtesting.org).
Fixes: 9d4f645a1fd4 ("dma-debug: store a phys_addr_t in struct dma_debug_entry")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
[hch: added a little helper to clean up the code]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Recent kernels cause a lot of TCP retransmissions
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 2.24 GBytes 19.2 Gbits/sec 2767 442 KBytes
[ 5] 1.00-2.00 sec 2.23 GBytes 19.1 Gbits/sec 2312 350 KBytes
^^^^
Replacing the qdisc with pfifo makes retransmissions go away.
It appears that a flow may have a delayed packet with a very near
Tx time. Later, we may get busy processing Rx and the target Tx time
will pass, but we won't service Tx since the CPU is busy with Rx.
If Rx sees an ACK and we try to push more data for the delayed flow
we may fastpath the skb, not realizing that there are already "ready
to send" packets for this flow sitting in the qdisc.
Don't trust the fastpath if we are "behind" according to the projected
Tx time for next flow waiting in the Qdisc. Because we consider anything
within the offload window to be okay for fastpath we must consider
the entire offload window as "now".
Qdisc config:
qdisc fq 8001: dev eth0 parent 1234:1 limit 10000p flow_limit 100p \
buckets 32768 orphan_mask 1023 bands 3 \
priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 \
weights 589824 196608 65536 quantum 3028b initial_quantum 15140b \
low_rate_threshold 550Kbit \
refill_delay 40ms timer_slack 10us horizon 10s horizon_drop
For iperf this change seems to do fine, the reordering is gone.
The fastpath still gets used most of the time:
gc 0 highprio 0 fastpath 142614 throttled 418309 latency 19.1us
xx_behind 2731
where "xx_behind" counts how many times we hit the new "return false".
CC: stable@vger.kernel.org
Fixes: 076433bd78d7 ("net_sched: sch_fq: add fast path for mostly idle qdisc")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241124022148.3126719-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The cited commit replaced inet_csk_reqsk_queue_drop_and_put() with
__inet_csk_reqsk_queue_drop() and reqsk_put() in reqsk_timer_handler().
Then, oreq should be passed to reqsk_put() instead of req; otherwise
use-after-free of nreq could happen when reqsk is migrated but the
retry attempt failed (e.g. due to timeout).
Let's pass oreq to reqsk_put().
Fixes: e8c526f2bdf1 ("tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().")
Reported-by: Liu Jian <liujian56@huawei.com>
Closes: https://lore.kernel.org/netdev/1284490f-9525-42ee-b7b8-ccadf6606f6d@huawei.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241123174236.62438-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When phy_ethtool_set_eee_noneg() detects a change in the LPI
parameters, it attempts to update phylib state and trigger the link
to cycle so the MAC sees the updated parameters.
However, in doing so, it sets phydev->enable_tx_lpi depending on
whether the EEE configuration allows the MAC to generate LPI without
taking into account the result of negotiation.
This can be demonstrated with a 1000base-T FD interface by:
# ethtool --set-eee eno0 advertise 8 # cause EEE to be not negotiated
# ethtool --set-eee eno0 tx-lpi off
# ethtool --set-eee eno0 tx-lpi on
This results in being true, despite EEE not having been negotiated and:
# ethtool --show-eee eno0
EEE status: enabled - inactive
Tx LPI: 250 (us)
Supported EEE link modes: 100baseT/Full
1000baseT/Full
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
Fix this by keeping track of whether EEE was negotiated via a new
eee_active member in struct phy_device, and include this state in
the decision whether phydev->enable_tx_lpi should be set.
Fixes: 3e43b903da04 ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tErSe-005RhB-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- SCO: remove the redundant sco_conn_put
- MGMT: Fix slab-use-after-free Read in set_powered_sync
- MGMT: Fix possible deadlocks
* tag 'for-net-2024-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: SCO: remove the redundant sco_conn_put
Bluetooth: MGMT: Fix possible deadlocks
Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync
====================
Link: https://patch.msgid.link/20241126165149.899213-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Michal Luczaj says:
====================
net: Fix some callers of copy_from_sockptr()
Some callers misinterpret copy_from_sockptr()'s return value. The function
follows copy_from_user(), i.e. returns 0 for success, or the number of
bytes not copied on error. Simply returning the result in a non-zero case
isn't usually what was intended.
Compile tested with CONFIG_LLC, CONFIG_AF_RXRPC, CONFIG_BT enabled.
Last patch probably belongs more to net-next, if any. Here as an RFC.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================
Link: https://patch.msgid.link/20241119-sockptr-copy-fixes-v3-0-d752cac4be8e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
copy_from_sockptr() has a history of misuse. Add a comment explaining that
the function follows API of copy_from_user(), i.e. returns 0 for success,
or number of bytes not copied on error.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
copy_from_sockptr() does not return negative value on error; instead, it
reports the number of bytes that failed to copy. Since it's deprecated,
switch to copy_safe_from_sockptr().
Note: Keeping the `optlen != sizeof(unsigned int)` check as
copy_safe_from_sockptr() by itself would also accept
optlen > sizeof(unsigned int). Which would allow a more lenient handling
of inputs.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
copy_from_sockptr() is used incorrectly: return value is the number of
bytes that could not be copied. Since it's deprecated, switch to
copy_safe_from_sockptr().
Note: Keeping the `optlen != sizeof(int)` check as copy_safe_from_sockptr()
by itself would also accept optlen > sizeof(int). Which would allow a more
lenient handling of inputs.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Suggested-by: David Wei <dw@davidwei.uk>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Medion E15433 laptop wich ALC269VC (SSID 2782:1705) needs the same
workaround for the missing speaker as another model.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1233298
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241128072646.15659-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Change the naming for consistency.
While at this, fix the comments in scripts/link-vmlinux.sh.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
W=1 builds reported warnings regarding files being ignored:
tools/testing/selftests/arm64/tags/.gitignore: warning: ignored by one of the .gitignore files
tools/testing/selftests/arm64/tags/Makefile: warning: ignored by one of the .gitignore files
tools/testing/selftests/arm64/tags/tags_test.c: warning: ignored by one of the .gitignore files
Adjusting the .gitignore entries will prevent these warnings and
ensure a smoother script execution.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
resolve_btfids is used by link-vmlinux.sh.
In contrast to other configuration options and targets no transitive
dependency between resolve_btfids and vmlinux.
Add an explicit one.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Use a helper available in scripts/include/hash.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Python3 is necessary for running some scripts such as
drivers/gpu/drm/msm/registers/gen_header.py
Both scripts/package/kernel.spec and scripts/package/PKGBUILD already
list Python as the build dependency.
Do likewise for scripts/package/mkdebian.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
