summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-07arm64: dts: ls1043a: add crypto nodeHoria Geantă
LS1043A has a SEC v5.4 security engine. For now don't add rtic or sec_mon subnodes, since these features haven't been tested yet. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-07hwrng: chaoskey - Fix URB warning due to timeout on AleaBob Ham
The first read on an Alea takes about 1.8 seconds, more than the timeout value waiting for the read. As a consequence, later URB reuse causes the warning given below. To avoid this, we increase the wait time for the first read on the Alea. [ 78.293247] WARNING: CPU: 3 PID: 1892 at drivers/usb/core/urb.c:338 usb_submit_urb+0x2b4/0x580 [usbcore] [ 78.293250] URB ffff8802135be3c0 submitted while active [ 78.293252] Modules linked in: chaoskey(+) rng_core rfcomm binfmt_misc bnep cfg80211 nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc bridge stp llc tun snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support nls_utf8 nls_cp437 vfat fat intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel efi_pstore kvm irqbypass pcspkr btusb btrtl btbcm btintel uvcvideo joydev bluetooth videobuf2_vmalloc videobuf2_memops efivars videobuf2_v4l2 serio_raw i2c_i801 videobuf2_core videodev cdc_mbim media lpc_ich shpchp mfd_core cdc_ncm usbnet mii cdc_wdm cdc_acm evdev snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core i915 snd_pcm snd_timer i2c_algo_bit drm_kms_helper wmi thinkpad_acpi drm nvram mei_me mei snd soundcore rfkill ac battery i2c_core [ 78.293335] video button tpm_tis tpm fuse parport_pc ppdev lp parport autofs4 ext4 crc16 jbd2 mbcache algif_skcipher af_alg hid_generic usbhid hid dm_crypt dm_mod sg sr_mod cdrom sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel jitterentropy_rng sha256_generic hmac drbg aesni_intel xhci_pci aes_x86_64 ahci glue_helper xhci_hcd ehci_pci lrw libahci gf128mul ablk_helper cryptd libata sdhci_pci psmouse sdhci scsi_mod ehci_hcd mmc_core usbcore usb_common thermal [ 78.293402] CPU: 3 PID: 1892 Comm: hwrng Not tainted 4.7.0-rc1-linux-14+ #16 [ 78.293405] Hardware name: LENOVO 232577G/232577G, BIOS G2ET92WW (2.52 ) 02/22/2013 [ 78.293408] 0000000000000000 ffffffff812dfa0f ffff8801fa5b3d68 0000000000000000 [ 78.293413] ffffffff81072224 ffff8802135be3c0 ffff8801fa5b3db8 ffff880212e44210 [ 78.293418] 0000000000000040 ffff880209fb32c0 ffff880212e44200 ffffffff8107228f [ 78.293422] Call Trace: [ 78.293432] [<ffffffff812dfa0f>] ? dump_stack+0x5c/0x7d [ 78.293437] [<ffffffff81072224>] ? __warn+0xc4/0xe0 [ 78.293441] [<ffffffff8107228f>] ? warn_slowpath_fmt+0x4f/0x60 [ 78.293451] [<ffffffff810a46a2>] ? enqueue_task_fair+0xcd2/0x1260 [ 78.293463] [<ffffffffa001ec54>] ? usb_submit_urb+0x2b4/0x580 [usbcore] [ 78.293474] [<ffffffff8140c2e5>] ? __pm_runtime_resume+0x55/0x70 [ 78.293484] [<ffffffffa0825212>] ? _chaoskey_fill+0x132/0x250 [chaoskey] [ 78.293485] usbcore: registered new interface driver chaoskey [ 78.293493] [<ffffffff810aed50>] ? wait_woken+0x90/0x90 [ 78.293500] [<ffffffffa06448c0>] ? devm_hwrng_register+0x80/0x80 [rng_core] [ 78.293505] [<ffffffffa0825907>] ? chaoskey_rng_read+0x127/0x140 [chaoskey] [ 78.293511] [<ffffffffa06448c0>] ? devm_hwrng_register+0x80/0x80 [rng_core] [ 78.293515] [<ffffffffa064492e>] ? hwrng_fillfn+0x6e/0x120 [rng_core] [ 78.293520] [<ffffffff8108fb5f>] ? kthread+0xcf/0xf0 [ 78.293529] [<ffffffff81596d5f>] ? ret_from_fork+0x1f/0x40 [ 78.293535] [<ffffffff8108fa90>] ? kthread_park+0x50/0x50 Signed-off-by: Bob Ham <bob.ham@collabora.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-07hwrng: chaoskey - Add support for Araneus Alea I USB RNGBob Ham
Adds support for the Araneus Alea I USB hardware Random Number Generator which is interfaced with in exactly the same way as the Altus Metrum ChaosKey. We just add the appropriate device ID and modify the config help text. Signed-off-by: Bob Ham <bob.ham@collabora.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-07crypto: hash - shrink hash down to two typesGiovanni Cabiddu
Move hash to 0xe to free up the space for acomp/scomp Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-07crypto: skcipher - remove unused header cpumask.hGeliang Tang
Remove unused header cpumask.h from crypto/ablkcipher.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-07crypto: omap-aes - Fix registration of algorithmsLokesh Vutla
Algorithms can be registered only once. So skip registration of algorithms if already registered (i.e. in case we have two AES cores in the system.) Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-02crypto: sha1-mb - stylistic cleanupMegha Dey
Currently there are several checkpatch warnings in the sha1_mb.c file: 'WARNING: line over 80 characters' in the sha1_mb.c file. Also, the syntax of some multi-line comments are not correct. This patch fixes these issues. Signed-off-by: Megha Dey <megha.dey@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-02crypto: drbg - reduce number of setkey callsStephan Mueller
The CTR DRBG code always set the key for each sym cipher invocation even though the key has not been changed. The patch ensures that the setkey is only invoked when a new key is generated by the DRBG. With this patch, the CTR DRBG performance increases by more than 150%. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31crypto: s5p-sss - Use consistent indentation for variables and membersKrzysztof Kozlowski
Bring some consistency by: 1. Replacing fixed-space indentation of structure members with just tabs. 2. Remove indentation in declaration of local variable between type and name. Driver was mixing usage of such indentation and lack of it. When removing indentation, reorder variables in reversed-christmas-tree order with first variables being initialized ones. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31hwrng: bcm2835 - Read as much data as availableYendapally Reddy Dhananjaya Reddy
Read the requested number of data from the fifo Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31ARM: dts: nsp: Add rng device tree entryYendapally Reddy Dhananjaya Reddy
Add support for the random number generator to the Northstar Plus SoC device tree. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31hwrng: bcm2835 - Support Broadcom NSP SoC rngYendapally Reddy Dhananjaya Reddy
This supports the random number generator available in NSP SoC. Masks the rng interrupt for NSP. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31dt-bindings: rng: Northstar Plus SoC rng bindingsYendapally Reddy Dhananjaya Reddy
Document the bindings used by Northstar Plus(NSP) SoC random number generator. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31lib/mpi: refactor mpi_read_from_buffer() in terms of mpi_read_raw_data()Nicolai Stange
mpi_read_from_buffer() and mpi_read_raw_data() do basically the same thing except that the former extracts the number of payload bits from the first two bytes of the input buffer. Besides that, the data copying logic is exactly the same. Replace the open coded buffer to MPI instance conversion by a call to mpi_read_raw_data(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31lib/mpi: mpi_read_from_buffer(): sanitize short buffer printkNicolai Stange
The first two bytes of the input buffer encode its expected length and mpi_read_from_buffer() prints a console message if the given buffer is too short. However, there are some oddities with how this message is printed: - It is printed at the default loglevel. This is different from the one used in the case that the first two bytes' value is unsupportedly large, i.e. KERN_INFO. - The format specifier '%d' is used for unsigned ints. - It prints the values of nread and *ret_nread. This is redundant since the former is always the latter + 1. Clean this up as follows: - Use pr_info() rather than printk() with no loglevel. - Use the format specifiers '%u' in place if '%d'. - Do not print the redundant 'nread' but the more helpful 'nbytes' value. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31lib/mpi: mpi_read_from_buffer(): return -EINVAL upon too short bufferNicolai Stange
Currently, if the input buffer is shorter than the expected length as indicated by its first two bytes, an MPI instance of this expected length will be allocated and filled with as much data as is available. The rest will remain uninitialized. Instead of leaving this condition undetected, an error code should be reported to the caller. Since this situation indicates that the input buffer's first two bytes, encoding the number of expected bits, are garbled, -EINVAL is appropriate here. If the input buffer is shorter than indicated by its first two bytes, make mpi_read_from_buffer() return -EINVAL. Get rid of the 'nread' variable: with the new semantics, the total number of bytes read from the input buffer is known in advance. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31lib/digsig: digsig_verify_rsa(): return -EINVAL if modulo length is zeroNicolai Stange
Currently, if digsig_verify_rsa() detects that the modulo's length is zero, i.e. mlen == 0, it returns -ENOMEM which doesn't really fit here. Make digsig_verify_rsa() return -EINVAL upon mlen == 0. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31lib/mpi: mpi_read_from_buffer(): return error codeNicolai Stange
mpi_read_from_buffer() reads a MPI from a buffer into a newly allocated MPI instance. It expects the buffer's leading two bytes to contain the number of bits, followed by the actual payload. On failure, it returns NULL and updates the in/out argument ret_nread somewhat inconsistently: - If the given buffer is too short to contain the leading two bytes encoding the number of bits or their value is unsupported, then ret_nread will be cleared. - If the allocation of the resulting MPI instance fails, ret_nread is left as is. The only user of mpi_read_from_buffer(), digsig_verify_rsa(), simply checks for a return value of NULL and returns -ENOMEM if that happens. While this is all of cosmetic nature only, there is another error condition which currently isn't detectable by the caller of mpi_read_from_buffer(): if the given buffer is too small to hold the number of bits as encoded in its first two bytes, the return value will be non-NULL and *ret_nread > 0. In preparation of communicating this condition to the caller, let mpi_read_from_buffer() return error values by means of the ERR_PTR() mechanism. Make the sole caller of mpi_read_from_buffer(), digsig_verify_rsa(), check the return value for IS_ERR() rather than == NULL. If IS_ERR() is true, return the associated error value rather than the fixed -ENOMEM. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31lib/mpi: mpi_read_raw_data(): fix nbits calculationNicolai Stange
The number of bits, nbits, is calculated in mpi_read_raw_data() as follows: nbits = nbytes * 8; Afterwards, the number of leading zero bits of the first byte get subtracted: nbits -= count_leading_zeros(buffer[0]); However, count_leading_zeros() takes an unsigned long and thus, the u8 gets promoted to an unsigned long. Thus, the above doesn't subtract the number of leading zeros in the most significant nonzero input byte from nbits, but the number of leading zeros of the most significant nonzero input byte promoted to unsigned long, i.e. BITS_PER_LONG - 8 too many. Fix this by subtracting count_leading_zeros(...) - (BITS_PER_LONG - 8) from nbits only. Fixes: e1045992949 ("MPILIB: Provide a function to read raw data into an MPI") Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31lib/mpi: mpi_read_raw_data(): purge redundant clearing of nbitsNicolai Stange
In mpi_read_raw_data(), unsigned nbits is calculated as follows: nbits = nbytes * 8; and redundantly cleared later on if nbytes == 0: if (nbytes > 0) ... else nbits = 0; Purge this redundant clearing for the sake of clarity. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31lib/mpi: purge mpi_set_buffer()Nicolai Stange
mpi_set_buffer() has no in-tree users and similar functionality is provided by mpi_read_raw_data(). Remove mpi_set_buffer(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31hwrng: stm32 - fix maybe uninitialized variable warningMaxime Coquelin
This patch fixes the following warning: drivers/char/hw_random/stm32-rng.c: In function 'stm32_rng_read': drivers/char/hw_random/stm32-rng.c:82:19: warning: 'sr' may be used uninitialized in this function Reported-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Suggested-by: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31MAINTAINERS: Add file patterns for rng device tree bindingsGeert Uytterhoeven
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31MAINTAINERS: Add file patterns for crypto device tree bindingsGeert Uytterhoeven
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31crypto: powerpc - Fix typoAndrea Gelmini
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31crypto: doc - Fix typoAndrea Gelmini
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31crypto: caam - add ARCH_LAYERSCAPE to supported architecturesHoria Geantă
This basically adds support for ls1043a platform. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31crypto: caam - handle core endianness != caam endiannessHoria Geantă
There are SoCs like LS1043A where CAAM endianness (BE) does not match the default endianness of the core (LE). Moreover, there are requirements for the driver to handle cases like CPU_BIG_ENDIAN=y on ARM-based SoCs. This requires for a complete rewrite of the I/O accessors. PPC-specific accessors - {in,out}_{le,be}XX - are replaced with generic ones - io{read,write}[be]XX. Endianness is detected dynamically (at runtime) to allow for multiplatform kernels, for e.g. running the same kernel image on LS1043A (BE CAAM) and LS2080A (LE CAAM) armv8-based SoCs. While here: debugfs entries need to take into consideration the endianness of the core when displaying data. Add the necessary glue code so the entries remain the same, but they are properly read, regardless of the core and/or SEC endianness. Note: pdb.h fixes only what is currently being used (IPsec). Reviewed-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31crypto: caam - fix offset field in hw sg entriesCristian Stoica
The offset field is 13 bits wide; make sure we don't overwrite more than that in the caam hardware scatter gather structure. Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31powerpc: add io{read,write}64 accessorsHoria Geantă
This will allow device drivers to consistently use io{read,write}XX also for 64-bit accesses. Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31arm64: add io{read,write}64be accessorsHoria Geantă
This will allow device drivers to consistently use io{read,write}XXbe also for 64-bit accesses. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31asm-generic/io.h: add io{read,write}64 accessorsHoria Geantă
This will allow device drivers to consistently use io{read,write}XX also for 64-bit accesses. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31asm-generic/io.h: allow barriers in io{read,write}{16,32}beHoria Geantă
While reviewing the addition of io{read,write}64be accessors, Arnd -finds a potential problem: "If an architecture overrides readq/writeq to have barriers but does not override ioread64be/iowrite64be, this will lack the barriers and behave differently from the little-endian version. I think the only affected architecture is ARC, since ARM and ARM64 both override the big-endian accessors to have the correct barriers, and all others don't use barriers at all." -suggests a fix for the same problem in existing code (16/32-bit accessors); the fix leads "to a double-swap on architectures that don't override the io{read,write}{16,32}be accessors, but it will work correctly on all architectures without them having to override these accessors." Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31crypto: qat - fix typos sizeof for ctxTadeusz Struk
The sizeof(*ctx->dec_cd) and sizeof(*ctx->enc_cd) are equal, but we should use the correct one for freeing memory anyway. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31crypto: user - no parsing of CRYPTO_MSG_GETALGStephan Mueller
The CRYPTO_MSG_GETALG netlink message type provides a buffer to the kernel to retrieve information from the kernel. The data buffer will not provide any input and will not be read. Hence the nlmsg_parse is not applicable to this netlink message type. This patch fixes the following kernel log message when using this netlink interface: netlink: 208 bytes leftover after parsing attributes in process `XXX'. Patch successfully tested with libkcapi from [1] which uses CRYPTO_MSG_GETALG to obtain cipher-specific information from the kernel. [1] http://www.chronox.de/libkcapi.html Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-31crypto: sha-ssse3 - add MODULE_ALIASStephan Mueller
Add the MODULE_ALIAS for the cra_driver_name of the different ciphers to allow an automated loading if a driver name is used. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-05-30Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - missing selection in public_key that may result in a build failure - Potential crash in error path in omap-sham - ccp AES XTS bug that affects requests larger than 4096" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ccp - Fix AES XTS error for request sizes above 4096 crypto: public_key: select CRYPTO_AKCIPHER crypto: omap-sham - potential Oops on error in probe
2016-05-29Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of four fixes noticed in the merge window. The aacraid one is an optimisation, the mp3sas one fixes a spurious printk, the sd_check_events one fixes a theoretical race and the failed zero length commands fixes a bug in our completion/retry routines that has been causing problems in the field" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: aacraid: do not activate events on non-SRC adapters mpt3sas: add missing curly braces sd: get disk reference in sd_check_events() scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands
2016-05-29Linux 4.7-rc1v4.7-rc1Linus Torvalds
2016-05-29hash_string: Fix zero-length case for !DCACHE_WORD_ACCESSGeorge Spelvin
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf22d2 ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28Rename other copy of hash_string to hashlen_stringGeorge Spelvin
The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by: George Spelvin <linux@sciencehorizons.net> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf22d2 ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28hpfs: implement the show_options methodMikulas Patocka
The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28affs: fix remount failure when there are no options changedMikulas Patocka
Commit c8f33d0bec99 ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0bec99 ("affs: kstrdup() memory handling") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28hpfs: fix remount failure when there are no options changedMikulas Patocka
Commit ce657611baf9 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611baf9 ("hpfs: kstrdup() out of memory handling") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ...
2016-05-28fs: fix binfmt_aout.c build errorGuenter Roeck
Various builds (such as i386:allmodconfig) fail with fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return' fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token [ Oops. My bad, I had stupidly thought that "allmodconfig" covered this on x86-64 too, but it obviously doesn't. Egg on my face. - Linus ] Fixes: 5d22fc25d4fc ("mm: remove more IS_ERR_VALUE abuses") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-28Merge branch 'hash' of git://ftp.sciencehorizons.net/linuxLinus Torvalds
Pull string hash improvements from George Spelvin: "This series does several related things: - Makes the dcache hash (fs/namei.c) useful for general kernel use. (Thanks to Bruce for noticing the zero-length corner case) - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the above. - Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two 32-bit multiplies will do well enough. - Rids the world of the bad hash multipliers in hash_32. This finishes the job started in commit 689de1d6ca95 ("Minimal fix-up of bad hashing behavior of hash_64()") The vast majority of Linux architectures have hardware support for 32x32-bit multiply and so derive no benefit from "simplified" multipliers. The few processors that do not (68000, h8/300 and some models of Microblaze) have arch-specific implementations added. Those patches are last in the series. - Overhauls the dcache hash mixing. The patch in commit 0fed3ac866ea ("namei: Improve hash mixing if CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion. Replaced with a much more careful design that's simultaneously faster and better. (My own invention, as there was noting suitable in the literature I could find. Comments welcome!) - Modify the hash_name() loop to skip the initial HASH_MIX(). This would let us salt the hash if we ever wanted to. - Sort out partial_name_hash(). The hash function is declared as using a long state, even though it's truncated to 32 bits at the end and the extra internal state contributes nothing to the result. And some callers do odd things: - fs/hfs/string.c only allocates 32 bits of state - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes - Modify bytemask_from_count to handle inputs of 1..sizeof(long) rather than 0..sizeof(long)-1. This would simplify users other than full_name_hash" Special thanks to Bruce Fields for testing and finding bugs in v1. (I learned some humbling lessons about "obviously correct" code.) On the arch-specific front, the m68k assembly has been tested in a standalone test harness, I've been in contact with the Microblaze maintainers who mostly don't care, as the hardware multiplier is never omitted in real-world applications, and I haven't heard anything from the H8/300 world" * 'hash' of git://ftp.sciencehorizons.net/linux: h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h>
2016-05-28h8300: Add <asm/hash.h>George Spelvin
This will improve the performance of hash_32() and hash_64(), but due to complete lack of multi-bit shift instructions on H8, performance will still be bad in surrounding code. Designing H8-specific hash algorithms to work around that is a separate project. (But if the maintainers would like to get in touch...) Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp
2016-05-28microblaze: Add <asm/hash.h>George Spelvin
Microblaze is an FPGA soft core that can be configured various ways. If it is configured without a multiplier, the standard __hash_32() will require a call to __mulsi3, which is a slow software loop. Instead, use a shift-and-add sequence for the constant multiply. GCC knows how to do this, but it's not as clever as some. Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com>
2016-05-28m68k: Add <asm/hash.h>George Spelvin
This provides a multiply by constant GOLDEN_RATIO_32 = 0x61C88647 for the original mc68000, which lacks a 32x32-bit multiply instruction. Yes, the amount of optimization effort put in is excessive. :-) Shift-add chain found by Yevgen Voronenko's Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.html Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 16:45:44 +0000