summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-23iio: imu: st_lsm6dsx: introduce sw trigger supportLorenzo Bianconi
There are some hw configuration where irq0 and/or irq1 pins are not connected to the SPI or I2C/I3C controller. In order to avoid polling the output register introduce iio-sw trigger support when irq line is not available (or hw FIFO is not supported). Suggested-by: Mario Tesi <mario.tesi@st.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/93ae6ff1150b531a9d7a4d3d1b1adb8383613717.1666955685.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23dt-bindings: iio: adc: qcom,spmi-vadc: extend exampleKrzysztof Kozlowski
Cleanup existing example (generic node name for spmi, use 4-space indentation) and add example for ADCv7 copied from Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221027143411.277980-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23dt-bindings: iio: adc: qcom,spmi-vadc: simplify compatible enumKrzysztof Kozlowski
The second compatible item in oneOf is just an enum, not a list. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221027143411.277980-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: adc: cc10001: Switch remaining IIO calls in probe to devm_ forms.Jonathan Cameron
As everything else is now handled by devm managed releases the triggered buffer setup and IIO device registration can also be moved over to their devm forms allowing dropping of remove(). Only user of drvdata associated with the struct device was the remove function, so also drop the platform_set_drvdata() call. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016170950.387751-6-jic23@kernel.org
2022-11-23iio: adc: cc10001: Use devm_ to call device power down.Jonathan Cameron
It is presumably safe to call the powerdown whether or not we are in the commented shared state (the driver always did this). The power down was previously out of order wrt to the probe() function so move using devm_ will ensure it occurs after the userspace interfaces are removed. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016170950.387751-5-jic23@kernel.org
2022-11-23iio: adc: cc10001: Use devm_clk_get_enabled() to avoid boilerplate.Jonathan Cameron
As this driver just enables clock in probe() and disables in remove() we can use this new function to replace boilerplate and simplify error paths. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016170950.387751-4-jic23@kernel.org
2022-11-23iio: adc: cc10001: Add devm_add_action_or_reset() to disable regulator.Jonathan Cameron
As the voltage of this regulator is queried, we cannot use the devm_regulator_get_enable() call and have to role our own disable. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016170950.387751-3-jic23@kernel.org
2022-11-23iio: adc: cc10001: Add local struct device *dev variable to avoid repititionJonathan Cameron
There are lots of uses of this in probe() and we are about to introduce some more, so add a local variable to simplify this. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016170950.387751-2-jic23@kernel.org
2022-11-23iio: Don't silently expect attribute typesMatti Vaittinen
The iio_triggered_buffer_setup_ext() and the devm_iio_kfifo_buffer_setup_ext() were changed by commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") to silently expect that all attributes given in buffer_attrs array are device-attributes. This expectation was not forced by the API - and some drivers did register attributes created by IIO_CONST_ATTR(). When using IIO_CONST_ATTRs the added attribute "wrapping" does not copy the pointer to stored string constant and when the sysfs file is read the kernel will access to invalid location. Change the function signatures to expect an array of iio_dev_attrs to avoid similar errors in the future. Merge conflict resolved whilst applying due to patch crossing with two new drivers (kx022a accelerometer and ad4130 ADC). Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/63f54787a684eb1232f1c5d275a09c786987fe4a.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: at91-sama5d2_adc: Use IIO_STATIC_CONST_DEVICE_ATTR()Matti Vaittinen
Slightly simplify by dropping open-coded constant data iio_dev_attr functions and using the IIO_STATIC_CONST_DEVICE_ATTR() instead. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/4476a4ce852febb3eb863878e66751c787195b18.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: bmc150-accel-core: Use IIO_STATIC_CONST_DEVICE_ATTR()Matti Vaittinen
Slightly simplify by dropping open-coded constant data iio_dev_attr functions and using the IIO_STATIC_CONST_DEVICE_ATTR() instead. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/b1b0d662705b43d68594639fb7719bc431101f79.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: adxl372: Use IIO_STATIC_CONST_DEVICE_ATTR()Matti Vaittinen
Slightly simplify by dropping open-coded constant data iio_dev_attr functions and using the IIO_STATIC_CONST_DEVICE_ATTR() instead. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/3632af8849ef101c54ec1f739596f22c773b067c.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: adxl367: Use IIO_STATIC_CONST_DEVICE_ATTR()Matti Vaittinen
Slightly simplify by dropping open-coded constant data iio_dev_attr functions and using the IIO_STATIC_CONST_DEVICE_ATTR() instead. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/c96c55363b8f36017ef7f18fdfe810cd3990e2a4.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: Add IIO_STATIC_CONST_DEVICE_ATTRMatti Vaittinen
Add IIO_STATIC_CONST_DEVICE_ATTR macro for creating an read-only iio_dev_attr which returns constant value. This macro is intended to be used when replacing the IIO_CONST_ATTR - attributes for triggered buffers because the triggered buffer attributes must be of type iio_dev_attr. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/8dd853dd0ef8eb40cb980cc6f6e7a43166de3afb.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: adc: ad4130: Fix spelling mistake "diffreential" -> "differential"Colin Ian King
There is a spelling mistake in an error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221104093148.167765-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23MAINTAINERS: Add KX022A maintainer entryMatti Vaittinen
Add maintainer entry for ROHM/Kionix KX022A accelerometer sensor driver. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/7895435f7fd31a3b576fc6a59b01eb3202c85d36.1666614295.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: Support Kionix/ROHM KX022A accelerometerMatti Vaittinen
KX022A is a 3-axis accelerometer from ROHM/Kionix. The sensor features include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ, tap/motion detection, wake-up & back-to-sleep events, four acceleration ranges (2, 4, 8 and 16g), and probably some other cool features. Add support for the basic accelerometer features such as getting the acceleration data via IIO. (raw reads, triggered buffer [data-ready] or using the WMI IRQ). Important things to be added include the double-tap, motion detection and wake-up as well as the runtime power management. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/758b00d6aea0a6431a5a3a78d557d449c113b21e.1666614295.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23dt-bindings: iio: Add KX022A accelerometerMatti Vaittinen
KX022A is a 3-axis Accelerometer from ROHM/Kionix. The sensor features include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ, tap/motion detection, wake-up & back-to-sleep events, four acceleration ranges (2, 4, 8 and 16g) and probably some other cool features. Add the basic device tree description for the accelerometer. Only basic accelerometer features are considered as of now - new properties may or may not be needed in the future when rest of the features are supported. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/06f8e1ab29d02ed216db10091a269df4b6abad9a.1666614295.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: trigger: sysfs: rename error label in iio_sysfs_trigger_probe()Yang Yingliang
Rename error label in iio_sysfs_trigger_probe() to make more readable. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221024105250.873394-1-yangyingliang@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: mlx90632 Style alignment for the driverCrt Mori
Changing and aligning the overall style of the driver with the recent reviews. There is no functional change, only type generalization and moving to the reverse Christmas tree for variable declarations. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/d59aad00891c1a64e044a0f5bc7d40e42d47e9c7.1666606912.git.cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: vl6180: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-24-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: st_magn: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-23-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: stk8ba50: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-22-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: stk8312: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-21-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: mxc6255: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-20-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: mxc4005: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-19-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: mma7660: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-15-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: mc3230: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-13-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: kxsd9: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-12-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: dmard10: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-10-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: dmard09: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-9-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: dmard06: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-8-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: da311: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-7-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: adxl367: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-2-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: proximity: sx_common: Use devm_regulator_bulk_get_enable()Jonathan Cameron
This driver only turns the power for some regulators on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_bulk_get_enable() replaces all this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-13-jic23@kernel.org
2022-11-23iio: light: noa1305: Use devm_regulator_get_enable()Jonathan Cameron
This driver only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_get_enable() replaces this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-12-jic23@kernel.org
2022-11-23iio: light: ltr501: Use devm_regulator_bulk_get_enable()Jonathan Cameron
This driver only turns the power for some regulators on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_bulk_get_enable() replaces all this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-11-jic23@kernel.org
2022-11-23iio: humidity: hts211: Use devm_regulator_get_enable()Jonathan Cameron
This driver only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_get_enable() replaces this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-10-jic23@kernel.org
2022-11-23iio: frequency: ad9523: Use devm_regulator_get_enable()Jonathan Cameron
This driver only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_get_enable() replaces this boilerplate code. Note that in event of an error on the devm_regulator_get() the driver would have continued without enabling the regulator which is probably not a good idea. So here we handle any error as a reason to fail the probe(). In theory this may expose breakage on a platform that was previously papered over but it seems low risk. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-9-jic23@kernel.org
2022-11-23iio: st_sensors: core and lsm9ds0 switch to devm_regulator_bulk_get_enable()Jonathan Cameron
These drivers only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The two regulators were handled separately so also switch to bulk registration. The new devm_regulator_bulk_get_enable() replaces all this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-8-jic23@kernel.org
2022-11-23iio: cdc: ad7150: Use devm_regulator_get_enable()Jonathan Cameron
This driver only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_get_enable() replaces this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-7-jic23@kernel.org
2022-11-23iio: accel: msa311: Use devm_regulator_get_enable()Jonathan Cameron
This driver only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_get_enable() replaces this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Dmitry Rokosov <DDRokosov@sberdevices.ru> Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-6-jic23@kernel.org
2022-11-23iio: accel: kxcjk-1013: Use devm_regulator_bulk_get_enable()Jonathan Cameron
This driver only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_bulk_get_enable() replaces this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-5-jic23@kernel.org
2022-11-23iio: accel: fxls8962af: Use devm_regulator_get_enable()Jonathan Cameron
This driver only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_get_enable() replaces this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-4-jic23@kernel.org
2022-11-23iio: accel: adxl367: Use devm_regulator_bulk_get_enable()Jonathan Cameron
This driver only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_bulk_get_enable() replaces this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-2-jic23@kernel.org
2022-11-23staging: iio: frequency: ad9834: merge unnecessary split linesDeepak R Varma
Improve code readability by merging unnecessary split lines that are well within the code-style guidelines post merge. Signed-off-by: Deepak R Varma <drv@mailo.com> Acked-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/Y0z2/qFe3kW96MTs@debian-BULLSEYE-live-builder-AMD64 Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: adc: ad4130: add AD4130 driverCosmin Tanislav
AD4130-8 is an ultra-low power, high precision, measurement solution for low bandwidth battery operated applications. The fully integrated AFE (Analog Front-End) includes a multiplexer for up to 16 single-ended or 8 differential inputs, PGA (Programmable Gain Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator, selectable filter options, smart sequencer, sensor biasing and excitation options, diagnostics, and a FIFO buffer. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20221021104115.1812486-3-demonsingur@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23dt-bindings: iio: adc: add AD4130Cosmin Tanislav
AD4130-8 is an ultra-low power, high precision, measurement solution for low bandwidth battery operated applications. The fully integrated AFE (Analog Front-End) includes a multiplexer for up to 16 single-ended or 8 differential inputs, PGA (Programmable Gain Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator, selectable filter options, smart sequencer, sensor biasing and excitation options, diagnostics, and a FIFO buffer. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221021104115.1812486-2-demonsingur@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23dt-bindings: iio: pressure: meas,ms5611: add max SPI frequency to the exampleMitja Spes
Added max SPI frequency setting to the example. Signed-off-by: Mitja Spes <mitja@lxnav.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221021135827.1444793-4-mitja@lxnav.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: amplifier: hmc425a: simplify using devm_regulator_get_enable()Matti Vaittinen
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(), add_action_or_reset(regulator_disable)' and use the devm_regulator_get_enable() and drop the pointer to the regulator. This simplifies code and makes it less tempting to add manual control for the regulator which is also controlled by devm. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/8b1193fdefb231a6d721e2bded52c48e56039c20.1660934107.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 19:26:49 +0000