| Age | Commit message (Collapse) | Author |
|---|
|
Eric reported that handling corresponding crash hotplug event can be
failed easily when many memory hotplug event are notified in a short
period. They failed because failing to take __kexec_lock.
=======
[ 78.714569] Fallback order for Node 0: 0
[ 78.714575] Built 1 zonelists, mobility grouping on. Total pages: 1817886
[ 78.717133] Policy zone: Normal
[ 78.724423] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate
[ 78.727207] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate
[ 80.056643] PEFILE: Unsigned PE binary
=======
The memory hotplug events are notified very quickly and very many, while
the handling of crash hotplug is much slower relatively. So the atomic
variable __kexec_lock and kexec_trylock() can't guarantee the
serialization of crash hotplug handling.
Here, add a new mutex lock __crash_hotplug_lock to serialize crash hotplug
handling specifically. This doesn't impact the usage of __kexec_lock.
Link: https://lkml.kernel.org/r/20230926120905.392903-1-bhe@redhat.com
Fixes: 247262756121 ("crash: add generic infrastructure for crash hotplug support")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
hugetlb_reparenting_test.sh that may cause error
According to the awk manual, the -e option does not need to be specified
in front of 'program' (unless you need to mix program-file).
The redundant -e option can cause error when users use awk tools other
than gawk (for example, mawk does not support the -e option).
Error Example:
awk: not an option: -e
Link: https://lkml.kernel.org/r/VI1P193MB075228810591AF2FDD7D42C599C3A@VI1P193MB0752.EURP193.PROD.OUTLOOK.COM
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
specified
When calling mbind() with MPOL_MF_{MOVE|MOVEALL} | MPOL_MF_STRICT, kernel
should attempt to migrate all existing pages, and return -EIO if there is
misplaced or unmovable page. Then commit 6f4576e3687b ("mempolicy: apply
page table walker on queue_pages_range()") messed up the return value and
didn't break VMA scan early ianymore when MPOL_MF_STRICT alone. The
return value problem was fixed by commit a7f40cfe3b7a ("mm: mempolicy:
make mbind() return -EIO when MPOL_MF_STRICT is specified"), but it broke
the VMA walk early if unmovable page is met, it may cause some pages are
not migrated as expected.
The code should conceptually do:
if (MPOL_MF_MOVE|MOVEALL)
scan all vmas
try to migrate the existing pages
return success
else if (MPOL_MF_MOVE* | MPOL_MF_STRICT)
scan all vmas
try to migrate the existing pages
return -EIO if unmovable or migration failed
else /* MPOL_MF_STRICT alone */
break early if meets unmovable and don't call mbind_range() at all
else /* none of those flags */
check the ranges in test_walk, EFAULT without mbind_range() if discontig.
Fixed the behavior.
Link: https://lkml.kernel.org/r/20230920223242.3425775-1-yang@os.amperecomputing.com
Fixes: a7f40cfe3b7a ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y
and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected.
Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary
variables"), the damon_destroy_ctx() is removed, but still call
damon_new_target() and damon_new_region(), the damon_region which is
allocated by kmem_cache_alloc() in damon_new_region() and the damon_target
which is allocated by kmalloc in damon_new_target() are not freed. And
the damon_region which is allocated in damon_new_region() in
damon_set_regions() is also not freed.
So use damon_destroy_target to free all the damon_regions and damon_target.
unreferenced object 0xffff888107c9a940 (size 64):
comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk
60 c7 9c 07 81 88 ff ff f8 cb 9c 07 81 88 ff ff `...............
backtrace:
[<ffffffff817e0167>] kmalloc_trace+0x27/0xa0
[<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0
[<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0
[<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881079cc740 (size 56):
comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s)
hex dump (first 32 bytes):
05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0
[<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888107c9ac40 (size 64):
comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk
a0 cc 9c 07 81 88 ff ff 78 a1 76 07 81 88 ff ff ........x.v.....
backtrace:
[<ffffffff817e0167>] kmalloc_trace+0x27/0xa0
[<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0
[<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0
[<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881079ccc80 (size 56):
comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s)
hex dump (first 32 bytes):
05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0
[<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888107c9af40 (size 64):
comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk
20 a2 76 07 81 88 ff ff b8 a6 76 07 81 88 ff ff .v.......v.....
backtrace:
[<ffffffff817e0167>] kmalloc_trace+0x27/0xa0
[<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0
[<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0
[<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810776a200 (size 56):
comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s)
hex dump (first 32 bytes):
05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0
[<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810776a740 (size 56):
comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.025s)
hex dump (first 32 bytes):
3d 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 =.......?.......
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0
[<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0
[<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888108038240 (size 64):
comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 03 00 00 00 6b 6b 6b 6b ............kkkk
48 ad 76 07 81 88 ff ff 98 ae 76 07 81 88 ff ff H.v.......v.....
backtrace:
[<ffffffff817e0167>] kmalloc_trace+0x27/0xa0
[<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0
[<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0
[<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810776ad28 (size 56):
comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s)
hex dump (first 32 bytes):
05 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 ................
6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk
backtrace:
[<ffffffff819bc492>] damon_new_region+0x22/0x1c0
[<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0
[<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0
[<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210
[<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81237cf6>] kthread+0x2b6/0x380
[<ffffffff81097add>] ret_from_fork+0x2d/0x70
[<ffffffff81003791>] ret_from_fork_asm+0x11/0x20
Link: https://lkml.kernel.org/r/20230925072100.3725620-1-ruanjinjie@huawei.com
Fixes: 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commits 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") and
partially reverts 58056f77502f ("memcg, kmem: further deprecate
kmem.limit_in_bytes") which have incrementally removed support for the
kernel memory accounting hard limit. Unfortunately it has turned out that
there is still userspace depending on the existence of
memory.kmem.limit_in_bytes [1]. The underlying functionality is not
really required but the non-existent file just confuses the userspace
which fails in the result. The patch to fix this on the userspace side
has been submitted but it is hard to predict how it will propagate through
the maze of 3rd party consumers of the software.
Now, reverting alone 86327e8eb94c is not an option because there is
another set of userspace which cannot cope with ENOTSUPP returned when
writing to the file. Therefore we have to go and revisit 58056f77502f as
well. There are two ways to go ahead. Either we give up on the
deprecation and fully revert 58056f77502f as well or we can keep
kmem.limit_in_bytes but make the write a noop and warn about the fact.
This should work for both known breaking workloads which depend on the
existence but do not depend on the hard limit enforcement.
Note to backporters to stable trees. a8c49af3be5f ("memcg: add per-memcg
total kernel memory stat") introduced in 4.18 has added memcg_account_kmem
so the accounting is not done by obj_cgroup_charge_pages directly for v1
anymore. Prior kernels need to add it explicitly (thanks to Johannes for
pointing this out).
[akpm@linux-foundation.org: fix build - remove unused local]
Link: http://lkml.kernel.org/r/20230920081101.GA12096@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net [1]
Link: https://lkml.kernel.org/r/ZRE5VJozPZt9bRPy@dhcp22.suse.cz
Fixes: 86327e8eb94c ("memcg: drop kmem.limit_in_bytes")
Fixes: 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While stress-testing zswap a memory corruption was happening when writing
back pages. __frontswap_store used to check for duplicate entries before
attempting to store a page in zswap, this was because if the store fails
the old entry isn't removed from the tree. This change removes duplicate
entries in zswap_store before the actual attempt.
[cerasuolodomenico@gmail.com: add a warning and a comment, per Johannes]
Link: https://lkml.kernel.org/r/20230925130002.1929369-1-cerasuolodomenico@gmail.com
Link: https://lkml.kernel.org/r/20230922172211.1704917-1-cerasuolodomenico@gmail.com
Fixes: 42c06a0e8ebe ("mm: kill frontswap")
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When called with a swap entry that does not embed a PFN (e.g.
PTE_MARKER_POISONED or PTE_MARKER_UFFD_WP), the previous implementation of
set_huge_pte_at() would either cause a BUG() to fire (if CONFIG_DEBUG_VM
is enabled) or cause a dereference of an invalid address and subsequent
panic.
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
Arguably, the root cause is really due to commit 18f3962953e4 ("mm:
hugetlb: kill set_huge_swap_pte_at()"), which aimed to simplify the
interface to the core code by removing set_huge_swap_pte_at() (which took
a page size parameter) and replacing it with calls to set_huge_pte_at()
where the size was inferred from the folio, as descibed above. While that
commit didn't break anything at the time, it did break the interface
because it couldn't handle swap entries without PFNs. And since then new
callers have come along which rely on this working. But given the
brokeness is only observable after commit 8a13897fb0da ("mm: userfaultfd:
support UFFDIO_POISON for hugetlbfs"), that one gets the Fixes tag.
Now that we have modified the set_huge_pte_at() interface to pass the huge
page size in the previous patch, we can trivially fix this issue.
Link: https://lkml.kernel.org/r/20230922115804.2043771-3-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When updating the maple tree iterator to avoid rewalks, an issue was
introduced when shifting beyond the limits. This can be seen by trying to
go to the previous address of 0, which would set the maple node to
MAS_NONE and keep the range as the last entry.
Subsequent calls to mas_find() would then search upwards from mas->last
and skip the value at mas->index/mas->last. This showed up as a bug in
mprotect which skips the actual VMA at the current range after attempting
to go to the previous VMA from 0.
Since MAS_NONE may already be set when searching for a value that isn't
contained within a node, changing the handling of MAS_NONE in mas_find()
would make the code more complicated and error prone. Furthermore, there
was no way to tell which limit was hit, and thus which action to take
(next or the entry at the current range).
This solution is to add two states to track what happened with the
previous iterator action. This allows for the expected behaviour of the
next command to return the correct item (either the item at the range
requested, or the next/previous).
Tests are also added and updated accordingly.
Link: https://lkml.kernel.org/r/20230921181236.509072-3-Liam.Howlett@oracle.com
Link: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Link: https://lore.kernel.org/linux-mm/20230921181236.509072-1-Liam.Howlett@oracle.com/
Fixes: 39193685d585 ("maple_tree: try harder to keep active node with mas_prev()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Closes: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Closes: https://bugs.archlinux.org/task/79656
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "maple_tree: Fix mas_prev() state regression".
Pedro Falcato retported an mprotect regression [1] which was bisected back
to the iterator changes for maple tree. Root cause analysis showed the
mas_prev() running off the end of the VMA space (previous from 0) followed
by mas_find(), would skip the first value.
This patchset introduces maple state underflow/overflow so the sequence of
calls on the maple state will return what the user expects.
Users who encounter this bug may see mprotect(), userfaultfd_register(),
and mlock() fail on VMAs mapped with address 0.
This patch (of 2):
Instead of constantly checking each possibility of the maple state,
create a fast path that will skip over checking unlikely states.
Link: https://lkml.kernel.org/r/20230921181236.509072-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230921181236.509072-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the
reference count of bh when the call to nilfs_dat_translate() fails. If
the reference count hits 0 and its owner page gets unlocked, bh may be
freed. However, bh->b_page is dereferenced to put the page after that,
which may result in a use-after-free bug. This patch moves the release
operation after unlocking and putting the page.
NOTE: The function in question is only called in GC, and in combination
with current userland tools, address translation using DAT does not occur
in that function, so the code path that causes this issue will not be
executed. However, it is possible to run that code path by intentionally
modifying the userland GC library or by calling the GC ioctl directly.
[konishi.ryusuke@gmail.com: NOTE added to the commit log]
Link: https://lkml.kernel.org/r/1543201709-53191-1-git-send-email-bianpan2016@163.com
Link: https://lkml.kernel.org/r/20230921141731.10073-1-konishi.ryusuke@gmail.com
Fixes: a3d93f709e89 ("nilfs2: block cache for garbage collection")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reported-by: Ferry Meng <mengferry@linux.alibaba.com>
Closes: https://lkml.kernel.org/r/20230818092022.111054-1-mengferry@linux.alibaba.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In order to fix the L1TF vulnerability, x86 can invert the PTE bits for
PROT_NONE VMAs, which means we cannot move from one PTE to the next by
adding 1 to the PFN field of the PTE. This results in the BUG reported at
[1].
Abstract advancing the PTE to the next PFN through a pte_next_pfn()
function/macro.
Link: https://lkml.kernel.org/r/20230920040958.866520-1-willy@infradead.org
Fixes: bcc6cc832573 ("mm: add default definition of set_ptes()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: syzbot+55cc72f8cc3a549119df@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000d099fa0604f03351@google.com [1]
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Even though we had successfully mapped the relevant page, we would rarely
return success from filemap_map_folio_range(). That leads to falling back
from the VMA lock path to the mmap_lock path, which is a speed &
scalability issue. Found by inspection.
Link: https://lkml.kernel.org/r/20230920035336.854212-1-willy@infradead.org
Fixes: 617c28ecab22 ("filemap: batch PTE mappings")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The elf-fdpic loader hard sets the process personality to either
PER_LINUX_FDPIC for true elf-fdpic binaries or to PER_LINUX for normal ELF
binaries (in this case they would be constant displacement compiled with
-pie for example). The problem with that is that it will lose any other
bits that may be in the ELF header personality (such as the "bug
emulation" bits).
On the ARM architecture the ADDR_LIMIT_32BIT flag is used to signify a
normal 32bit binary - as opposed to a legacy 26bit address binary. This
matters since start_thread() will set the ARM CPSR register as required
based on this flag. If the elf-fdpic loader loses this bit the process
will be mis-configured and crash out pretty quickly.
Modify elf-fdpic loader personality setting so that it preserves the upper
three bytes by using the SET_PERSONALITY macro to set it. This macro in
the generic case sets PER_LINUX and preserves the upper bytes.
Architectures can override this for their specific use case, and ARM does
exactly this.
The problem shows up quite easily running under qemu using the ARM
architecture, but not necessarily on all types of real ARM hardware. If
the underlying ARM processor does not support the legacy 26-bit addressing
mode then everything will work as expected.
Link: https://lkml.kernel.org/r/20230907011808.2985083-1-gerg@kernel.org
Fixes: 1bde925d23547 ("fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries")
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull smb server fixes from Steve French:
"Two SMB3 server fixes for null pointer dereferences:
- invalid SMB3 request case (fixes issue found in testing the read
compound patch)
- iovec error case in response processing"
* tag '6.6-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: check iov vector index in ksmbd_conn_write()
ksmbd: return invalid parameter error response if smb2 request is invalid
|
|
Pull ceph fixes from Ilya Dryomov:
"A series that fixes an involved 'double watch error' deadlock in RBD
marked for stable and two cleanups"
* tag 'ceph-for-6.6-rc4' of https://github.com/ceph/ceph-client:
rbd: take header_rwsem in rbd_dev_refresh() only when updating
rbd: decouple parent info read-in from updating rbd_dev
rbd: decouple header read-in from updating rbd_dev->header
rbd: move rbd_dev_refresh() definition
Revert "ceph: make members in struct ceph_mds_request_args_ext a union"
ceph: remove unnecessary check for NULL in parse_longname()
|
|
Pull xfs fix from Chandan Babu:
- fix for commit 68b957f64fca ("xfs: load uncached unlinked inodes into
memory on demand") which address review comments provided by Dave
Chinner
* tag 'xfs-6.6-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix reloading entire unlinked bucket lists
|
|
Commit 31345a0f5901 ("MAINTAINERS: Replace my email address") added 13
instances of ...@broadcom.com and one of only ...@broadcom. I didn't
double check if Broadcom really owns that TLD, but git send-email
doesn't accept it, so add ".com" to that one bogous(?) instance.
Fixes: 31345a0f5901 ("MAINTAINERS: Replace my email address")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more detail:
- Add missing additionalProperties on child nodes to the pata-common
DT bindings (Rob)
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas)
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias)
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me)
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk
driver resume operation not being synchronized with libata EH port
resume handling.
This is addressed by changing the scsi disk driver disk start/stop
control to allow libata to execute disk suspend (spin down) and
resume (spin up) on its own during system suspend/resume. Runtime
suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races
- Establish a link between ATA ports and SCSI devices to order PM
operations
- Fix device removal to avoid issues with driver rmmod removal
- Fix synchronization of libata device rescan and SCSI disk resume
operation
- Remove libsas PM operations as suspend/resume is handled
directly by the sas controller resume
- Fix the SCSI disk driver to not issue commands to suspended
disks, thus avoiding potential system lock-up on resume"
* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-eh: Fix compilation warning in ata_eh_link_report()
ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
scsi: sd: Do not issue commands to suspended disks on shutdown
ata: libata-core: Do not register PM operations for SAS ports
ata: libata-scsi: Fix delayed scsi_rescan_device() execution
scsi: Do not attempt to rescan suspended devices
ata: libata-scsi: Disable scsi device manage_system_start_stop
scsi: sd: Differentiate system and runtime start/stop management
ata: libata-scsi: link ata port and scsi device
ata: libata-core: Fix port and device removal
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-sata: increase PMP SRST timeout to 10s
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
|
|
Pull block fixes from Jens Axboe:
"Just two minor comment / documentation fixes for the block side"
* tag 'block-6.6-2023-09-28' of git://git.kernel.dk/linux:
block: fix kernel-doc for disk_force_media_change()
block: correct stale comment in rq_qos_wait
|
|
Pull io_uring fix from Jens Axboe:
"A single fix going to stable for the IORING_OP_LINKAT flag handling"
* tag 'io_uring-6.6-2023-09-28' of git://git.kernel.dk/linux:
io_uring/fs: remove sqe->rw_flags checking from LINKAT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- stable fix to prevent list corruption when destroying caches with
leftover objects (Rafael Aquini)
- fix for a gotcha in kmalloc_size_roundup() when calling it with too
high size, discovered when recently a networking call site had to be
fixed for a different issue (David Laight)
* tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: kmalloc_size_roundup() must not return 0 for non-zero size
mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy()
|
|
Pull drm fixes from Dave Airlie:
"Regular pull, this feel suspiciously light so I expect next week might
be a bit heavier? Let's see how we go. This is from a code point of
view ivpu and i915 fixes.
The only other patch is adding Danilo Krummrich to the nouveau
maintainers, he's agreed to take on more of the roll after Ben
retired.
MAINTAINERS:
- add Danilo for nouveau
ivpu:
- Add PCI ids for Arrow Lake
- Fix memory corruption during IPC
- Avoid dmesg flooding
- 40xx: Wait for clock resource
- 40xx: Fix interrupt usage
- 40xx: Support caching when loading firmware
i915:
- Fix a panic regression on gen8_ggtt_insert_entries
- Fix load issue due to reservation address in ggtt_reserve_guc_top
- Fix a possible deadlock with guc busyness worker"
* tag 'drm-fixes-2023-09-29' of git://anongit.freedesktop.org/drm/drm:
accel/ivpu: Use cached buffers for FW loading
accel/ivpu/40xx: Fix missing VPUIP interrupts
accel/ivpu/40xx: Disable frequency change interrupt
accel/ivpu/40xx: Ensure clock resource ownership Ack before Power-Up
accel/ivpu: Don't flood dmesg with VPU ready message
accel/ivpu: Do not use wait event interruptible
MAINTAINERS: update nouveau maintainers
i915/guc: Get runtime pm in busyness worker only if already active
drm/i915/gt: Fix reservation address in ggtt_reserve_guc_top
i915: Limit the length of an sg list to the requested length
accel/ivpu: Add Arrow Lake pci id
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential spinlock deadlock in gpio-timberdale
- mark the gpio-pmic-eic-sprd driver as one that can sleep
* tag 'gpio-fixes-for-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip
gpio: timberdale: Fix potential deadlock on &tgpio->lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A bunch of clk driver fixes for issues found recently:
- Fix the binding for versaclock3 that was introduced this merge
window so we know what the values are for clk consumers
- Fix a 64-bit division issue in the versaclock3 driver
- Avoid breakage in the versaclock3 driver by rejiggering the enums
used to layout clks
- Fix the parent name of a clk in the Spreadtrum ums512 clk driver
- Fix a suspend/resume issue in Skyworks Si521xx clk driver where
regmap restoration fails because writes are wedged
- Return zero from Tegra bpmp recalc_rate() implementation when an
error occurs so we don't consider an error as a large rate"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: tegra: fix error return case for recalc_rate
clk: si521xx: Fix regmap write accessor
clk: si521xx: Use REGCACHE_FLAT instead of NONE
clk: sprd: Fix thm_parents incorrect configuration
clk: vc3: Make vc3_clk_mux enum values based on vc3_clk enum values
clk: vc3: Fix output clock mapping
clk: vc3: Fix 64 by 64 division
dt-bindings: clock: versaclock3: Add description for #clock-cells property
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- core: fix use after free during device release
- ab8500: avoid reporting multiple batteries to userspace
- rk817: fix DT node resource leak
- misc. small fixes, mostly for compiler warnings/errors
* tag 'for-v6.6-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: rk817: Fix node refcount leak
power: supply: core: fix use after free in uevent
power: supply: rt9467: Fix rt9467_run_aicl()
power: supply: rk817: Add missing module alias
power: supply: ucs1002: fix error code in ucs1002_get_property()
power: vexpress: fix -Wvoid-pointer-to-enum-cast warning
power: reset: use capital "OR" for multiple licenses in SPDX
pwr-mlxbf: extend Kconfig to include gpio-mlxbf3 dependency
power: supply: rt5033_charger: recognize EXTCON setting
power: supply: mt6370: Fix missing error code in mt6370_chg_toggle_cfo()
power: supply: ab8500: Set typing and props
|
|
Pull Xtensa fixes from Max Filippov:
- fix build warnings from builds performed with W=1
* tag 'xtensa-20230928' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: boot/lib: fix function prototypes
xtensa: umulsidi3: fix conditional expression
xtensa: boot: don't add include-dirs
xtensa: iss/network: make functions static
xtensa: tlb: include <asm/tlb.h> for missing prototype
xtensa: hw_breakpoint: include header for missing prototype
xtensa: smp: add headers for missing function prototypes
irqchip: irq-xtensa-mx: include header for missing prototype
xtensa: traps: add <linux/cpu.h> for function prototype
xtensa: stacktrace: include <asm/ftrace.h> for prototype
xtensa: signal: include headers for function prototypes
xtensa: processor.h: add init_arch() prototype
xtensa: ptrace: add prototypes to <asm/ptrace.h>
xtensa: irq: include <asm/traps.h>
xtensa: fault: include <asm/traps.h>
xtensa: add default definition for XCHAL_HAVE_DIV32
|
|
This is unionized with the actual link flags, so they can of course be
set and they will be evaluated further down. If not we fail any LINKAT
that has to set option flags.
Fixes: cf30da90bc3a ("io_uring: add support for IORING_OP_LINKAT")
Cc: stable@vger.kernel.org
Reported-by: Thomas Leonard <talex5@gmail.com>
Link: https://github.com/axboe/liburing/issues/955
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix a panic regression on gen8_ggtt_insert_entries (Matthew Wilcox)
- Fix load issue due to reservation address in ggtt_reserve_guc_top (Javier Pello)
- Fix a possible deadlock with guc busyness worker (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZRWMI1HmUYPGGylp@intel.com
|
|
The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an
enclave and set secs.epc_page to NULL. The SECS page is used for EAUG
and ELDU in the SGX page fault handler. However, the NULL check for
secs.epc_page is only done for ELDU, not EAUG before being used.
Fix this by doing the same NULL check and reloading of the SECS page as
needed for both EAUG and ELDU.
The SECS page holds global enclave metadata. It can only be reclaimed
when there are no other enclave pages remaining. At that point,
virtually nothing can be done with the enclave until the SECS page is
paged back in.
An enclave can not run nor generate page faults without a resident SECS
page. But it is still possible for a #PF for a non-SECS page to race
with paging out the SECS page: when the last resident non-SECS page A
triggers a #PF in a non-resident page B, and then page A and the SECS
both are paged out before the #PF on B is handled.
Hitting this bug requires that race triggered with a #PF for EAUG.
Following is a trace when it happens.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:sgx_encl_eaug_page+0xc7/0x210
Call Trace:
? __kmem_cache_alloc_node+0x16a/0x440
? xa_load+0x6e/0xa0
sgx_vma_fault+0x119/0x230
__do_fault+0x36/0x140
do_fault+0x12f/0x400
__handle_mm_fault+0x728/0x1110
handle_mm_fault+0x105/0x310
do_user_addr_fault+0x1ee/0x750
? __this_cpu_preempt_check+0x13/0x20
exc_page_fault+0x76/0x180
asm_exc_page_fault+0x27/0x30
Fixes: 5a90d2c3f5ef ("x86/sgx: Support adding of pages to an initialized enclave")
Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230728051024.33063-1-haitao.huang%40linux.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* ivpu:
* Add PCI ids for Arrow Lake
* Fix memory corruption during IPC
* Avoid dmesg flooding
* 40xx: Wait for clock resource
* 40xx: Fix interrupt usage
* 40xx: Support caching when loading firmware
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928081208.GA7881@linux-uq9g
|
|
During RCU-boost testing with the TREE03 rcutorture config, I found that
after a few hours, the machine locks up.
On tracing, I found that there is a live lock happening between 2 CPUs.
One CPU has an RT task running, while another CPU is being offlined
which also has an RT task running. During this offlining, all threads
are migrated. The migration thread is repeatedly scheduled to migrate
actively running tasks on the CPU being offlined. This results in a live
lock because select_fallback_rq() keeps picking the CPU that an RT task
is already running on only to get pushed back to the CPU being offlined.
It is anyway pointless to pick CPUs for pushing tasks to if they are
being offlined only to get migrated away to somewhere else. This could
also add unwanted latency to this task.
Fix these issues by not selecting CPUs in RT if they are not 'active'
for scheduling, using the cpu_active_mask. Other parts in core.c already
use cpu_active_mask to prevent tasks from being put on CPUs going
offline.
With this fix I ran the tests for days and could not reproduce the
hang. Without the patch, I hit it in a few hours.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230923011409.3522762-1-joel@joelfernandes.org
|
|
Forget to reset ctx->password to NULL will lead to bug like double free
Cc: stable@vger.kernel.org
Cc: Willy Tarreau <w@1wt.eu>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of device specific fixes, the most major one is for the
GXP driver which would probably have been confusing some callers with
returning the length rather than 0 on successful writes"
* tag 'spi-fix-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-gxp: BUG: Correct spi write return value
dt-bindings: spi: fsl-imx-cspi: Document missing entries
spi: cs42l43: Remove spurious pm_runtime_disable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix high_memory calculation and module loader errors with latest
binutils"
* tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Add support for 64_PCREL relocation type
LoongArch: Add support for 32_PCREL relocation type
LoongArch: Define relocation types for ABI v2.10
LoongArch: numa: Fix high_memory calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
- fix Alchemy build with MMC support disabled
* tag 'mips-fixes_6.6_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled
|
|
Fix a misspelling of "preceding".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
nfsd4_encode_readv() uses xdr->buf->page_len as a starting point for
the nfsd_iter_read() sink buffer -- page_len is going to be offset
by the parts of the COMPOUND that have already been encoded into
xdr->buf->pages.
However, that value must be captured /before/
xdr_reserve_space_vec() advances page_len by the expected size of
the read payload. Otherwise, the whole front part of the first
page of the payload in the reply will be uninitialized.
Mantas hit this because sec=krb5i forces RQ_SPLICE_OK off, which
invokes the readv part of the nfsd4_encode_read() path. Also,
older Linux NFS clients appear to send shorter READ requests
for files smaller than a page, whereas newer clients just send
page-sized requests and let the server send as many bytes as
are in the file.
Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Closes: https://lore.kernel.org/linux-nfs/f1d0b234-e650-0f6e-0f5d-126b3d51d1eb@gmail.com/
Fixes: 703d75215555 ("NFSD: Hoist rq_vec preparation into nfsd_read() [step two]")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The 6 bytes length of the tries_buf string in ata_eh_link_report() is
too short and results in a gcc compilation warning with W-!:
drivers/ata/libata-eh.c: In function ‘ata_eh_link_report’:
drivers/ata/libata-eh.c:2371:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Wformat-truncation=]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~
drivers/ata/libata-eh.c:2371:56: note: directive argument in the range [-2147483648, 4]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~
drivers/ata/libata-eh.c:2371:17: note: ‘snprintf’ output between 4 and 14 bytes into a destination of size 6
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2372 | ap->eh_tries);
| ~~~~~~~~~~~~~
Avoid this warning by increasing the string size to 16B.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The 24 bytes length allocated to the ncq_desc string in
ata_dev_config_lba() for ata_dev_config_ncq() to use is too short,
causing the following gcc compilation warnings when compiling with W=1:
drivers/ata/libata-core.c: In function ‘ata_dev_configure’:
drivers/ata/libata-core.c:2378:56: warning: ‘%d’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~
In function ‘ata_dev_config_ncq’,
inlined from ‘ata_dev_config_lba’ at drivers/ata/libata-core.c:2649:8,
inlined from ‘ata_dev_configure’ at drivers/ata/libata-core.c:2952:9:
drivers/ata/libata-core.c:2378:41: note: directive argument in the range [1, 32]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~
drivers/ata/libata-core.c:2378:17: note: ‘snprintf’ output between 16 and 31 bytes into a destination of size 24
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2379 | ddepth, aa_desc);
| ~~~~~~~~~~~~~~~~
Avoid these warnings and the potential truncation by changing the size
of the ncq_desc string to 32 characters.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver may
remove the scsi host, resulting in a call to sd_remove() for the
disks of the host. This in turn results in a call to sd_shutdown() which
will issue a synchronize cache command and a start stop unit command to
spindown the disk. sd_shutdown() issues the commands only if the device
is not already runtime suspended but does not check the power state for
system-wide suspend/resume. That is, the commands may be issued with the
device in a suspended state, which causes PM resume to hang, forcing a
reset of the machine to recover.
Fix this by tracking the suspended state of a disk by introducing the
suspended boolean field in the scsi_disk structure. This flag is set to
true when the disk is suspended is sd_suspend_common() and resumed with
sd_resume(). When suspended is true, sd_shutdown() is not executed from
sd_remove().
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
libsas does its own domain based power management of ports. For such
ports, libata should not use a device type defining power management
operations as executing these operations for suspend/resume in addition
to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is
not necessary (and likely dangerous to do, even though problems are not
seen currently).
Introduce the new ata_port_sas_type device_type for ports managed by
libsas. This new device type is used in ata_tport_add() and is defined
without power management operations.
Fixes: 2fcbdcb4c802 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after
device resume") modified ata_scsi_dev_rescan() to check the scsi device
"is_suspended" power field to ensure that the scsi device associated
with an ATA device is fully resumed when scsi_rescan_device() is
executed. However, this fix is problematic as:
1) It relies on a PM internal field that should not be used without PM
device locking protection.
2) The check for is_suspended and the call to scsi_rescan_device() are
not atomic and a suspend PM event may be triggered between them,
casuing scsi_rescan_device() to be called on a suspended device and
in that function blocking while holding the scsi device lock. This
would deadlock a following resume operation.
These problems can trigger PM deadlocks on resume, especially with
resume operations triggered quickly after or during suspend operations.
E.g., a simple bash script like:
for (( i=0; i<10; i++ )); do
echo "+2 > /sys/class/rtc/rtc0/wakealarm
echo mem > /sys/power/state
done
that triggers a resume 2 seconds after starting suspending a system can
quickly lead to a PM deadlock preventing the system from correctly
resuming.
Fix this by replacing the check on is_suspended with a check on the
return value given by scsi_rescan_device() as that function will fail if
called against a suspended device. Also make sure rescan tasks already
scheduled are first cancelled before suspending an ata port.
Fixes: 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_rescan_device() takes a scsi device lock before executing a device
handler and device driver rescan methods. Waiting for the completion of
any command issued to the device by these methods will thus be done with
the device lock held. As a result, there is a risk of deadlocking within
the power management code if scsi_rescan_device() is called to handle a
device resume with the associated scsi device not yet resumed.
Avoid such situation by checking that the target scsi device is in the
running state, that is, fully capable of executing commands, before
proceeding with the rescan and bailout returning -EWOULDBLOCK otherwise.
With this error return, the caller can retry rescaning the device after
a delay.
The state check is done with the device lock held and is thus safe
against incoming suspend power management operations.
Fixes: 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
|
|
The introduction of a device link to create a consumer/supplier
relationship between the scsi device of an ATA device and the ATA port
of that ATA device fixes the ordering of system suspend and resume
operations. For suspend, the scsi device is suspended first and the ata
port after it. This is fine as this allows the synchronize cache and
START STOP UNIT commands issued by the scsi disk driver to be executed
before the ata port is disabled.
For resume operations, the ata port is resumed first, followed
by the scsi device. This allows having the request queue of the scsi
device to be unfrozen after the ata port resume is scheduled in EH,
thus avoiding to see new requests prematurely issued to the ATA device.
Since libata sets manage_system_start_stop to 1, the scsi disk resume
operation also results in issuing a START STOP UNIT command to the
device being resumed so that the device exits standby power mode.
However, restoring the ATA device to the active power mode must be
synchronized with libata EH processing of the port resume operation to
avoid either 1) seeing the start stop unit command being received too
early when the port is not yet resumed and ready to accept commands, or
after the port resume process issues commands such as IDENTIFY to
revalidate the device. In this last case, the risk is that the device
revalidation fails with timeout errors as the drive is still spun down.
Commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume")
disabled issuing the START STOP UNIT command to avoid issues with it.
But this is incorrect as transitioning a device to the active power
mode from the standby power mode set on suspend requires a media access
command. The IDENTIFY, READ LOG and SET FEATURES commands executed in
libata EH context triggered by the ata port resume operation may thus
fail.
Fix these synchronization issues is by handling a device power mode
transitions for system suspend and resume directly in libata EH context,
without relying on the scsi disk driver management triggered with the
manage_system_start_stop flag.
To do this, the following libata helper functions are introduced:
1) ata_dev_power_set_standby():
This function issues a STANDBY IMMEDIATE command to transitiom a device
to the standby power mode. For HDDs, this spins down the disks. This
function applies only to ATA and ZAC devices and does nothing otherwise.
This function also does nothing for devices that have the
ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag
set.
For suspend, call ata_dev_power_set_standby() in
ata_eh_handle_port_suspend() before the port is disabled and frozen.
ata_eh_unload() is also modified to transition all enabled devices to
the standby power mode when the system is shutdown or devices removed.
2) ata_dev_power_set_active() and
This function applies to ATA or ZAC devices and issues a VERIFY command
for 1 sector at LBA 0 to transition the device to the active power mode.
For HDDs, since this function will complete only once the disk spin up.
Its execution uses the same timeouts as for reset, to give the drive
enough time to complete spinup without triggering a command timeout.
For resume, call ata_dev_power_set_active() in
ata_eh_revalidate_and_attach() after the port has been enabled and
before any other command is issued to the device.
With these changes, the manage_system_start_stop and no_start_on_resume
scsi device flags do not need to be set in ata_scsi_dev_config(). The
flag manage_runtime_start_stop is still set to allow the sd driver to
spinup/spindown a disk through the sd runtime operations.
Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The underlying device and driver of a SCSI disk may have different
system and runtime power mode control requirements. This is because
runtime power management affects only the SCSI disk, while system level
power management affects all devices, including the controller for the
SCSI disk.
For instance, issuing a START STOP UNIT command when a SCSI disk is
runtime suspended and resumed is fine: the command is translated to a
STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY
command to wake it up. The SCSI disk runtime operations have no effect
on the ata port device used to connect the ATA disk. However, for
system suspend/resume operations, the ATA port used to connect the
device will also be suspended and resumed, with the resume operation
requiring re-validating the device link and the device itself. In this
case, issuing a VERIFY command to spinup the disk must be done before
starting to revalidate the device, when the ata port is being resumed.
In such case, we must not allow the SCSI disk driver to issue START STOP
UNIT commands.
Allow a low level driver to refine the SCSI disk start/stop management
by differentiating system and runtime cases with two new SCSI device
flags: manage_system_start_stop and manage_runtime_start_stop. These new
flags replace the current manage_start_stop flag. Drivers setting the
manage_start_stop are modifed to set both new flags, thus preserving the
existing start/stop management behavior. For backward compatibility, the
old manage_start_stop sysfs device attribute is kept as a read-only
attribute showing a value of 1 for devices enabling both new flags and 0
otherwise.
Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is no direct device ancestry defined between an ata_device and
its scsi device which prevents the power management code from correctly
ordering suspend and resume operations. Create such ancestry with the
ata device as the parent to ensure that the scsi device (child) is
suspended before the ata device and that resume handles the ata device
before the scsi device.
The parent-child (supplier-consumer) relationship is established between
the ata_port (parent) and the scsi device (child) with the function
device_add_link(). The parent used is not the ata_device as the PM
operations are defined per port and the status of all devices connected
through that port is controlled from the port operations.
The device link is established with the new function
ata_scsi_slave_alloc(), and this function is used to define the
->slave_alloc callback of the scsi host template of all ata drivers.
Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
|
|
Whenever an ATA adapter driver is removed (e.g. rmmod),
ata_port_detach() is called repeatedly for all the adapter ports to
remove (unload) the devices attached to the port and delete the port
device itself. Removing of devices is done using libata EH with the
ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute
ata_eh_unload() which disables all devices attached to the port.
ata_port_detach() finishes by calling scsi_remove_host() to remove the
scsi host associated with the port. This function will trigger the
removal of all scsi devices attached to the host and in the case of
disks, calls to sd_shutdown() which will flush the device write cache
and stop the device. However, given that the devices were already
disabled by ata_eh_unload(), the synchronize write cache command and
start stop unit commands fail. E.g. running "rmmod ahci" with first
removing sd_mod results in error messages like:
ata13.00: disable device
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] Stopping disk
sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Fix this by removing all scsi devices of the ata devices connected to
the port before scheduling libata EH to disable the ATA devices.
Fixes: 720ba12620ee ("[PATCH] libata-hp: update unload-unplug")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function ata_port_request_pm() checks the port flag
ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to
ensure that power management operations for a port are not scheduled
simultaneously. However, this flag check is done without holding the
port lock.
Fix this by taking the port lock on entry to the function and checking
the flag under this lock. The lock is released and re-taken if
ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking
that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first
call is racy and the second one done without holding the port lock.
Fixes: 5ef41082912b ("ata: add ata port system PM callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
|
|
Add mitigation for the speculative return stack overflow vulnerability
which exists on Hygon processors too.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/tencent_4A14812842F104E93AA722EC939483CEFF05@qq.com
|
