summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-04netfilter: nf_tables: add NFTA_CHAIN_ID attributePablo Neira Ayuso
This netlink attribute allows you to refer to chains inside a transaction as an alternative to the name and the handle. The chain binding support requires this new chain ID approach. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-04ipvs: allow connection reuse for unconfirmed conntrackJulian Anastasov
YangYuxi is reporting that connection reuse is causing one-second delay when SYN hits existing connection in TIME_WAIT state. Such delay was added to give time to expire both the IPVS connection and the corresponding conntrack. This was considered a rare case at that time but it is causing problem for some environments such as Kubernetes. As nf_conntrack_tcp_packet() can decide to release the conntrack in TIME_WAIT state and to replace it with a fresh NEW conntrack, we can use this to allow rescheduling just by tuning our check: if the conntrack is confirmed we can not schedule it to different real server and the one-second delay still applies but if new conntrack was created, we are free to select new real server without any delays. YangYuxi lists some of the problem reports: - One second connection delay in masquerading mode: https://marc.info/?t=151683118100004&r=1&w=2 - IPVS low throughput #70747 https://github.com/kubernetes/kubernetes/issues/70747 - Apache Bench can fill up ipvs service proxy in seconds #544 https://github.com/cloudnativelabs/kube-router/issues/544 - Additional 1s latency in `host -> service IP -> pod` https://github.com/kubernetes/kubernetes/issues/90854 Fixes: f719e3754ee2 ("ipvs: drop first packet to redirect conntrack") Co-developed-by: YangYuxi <yx.atom1@gmail.com> Signed-off-by: YangYuxi <yx.atom1@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-03mm/page_alloc: fix documentation errorJoel Savitz
When I increased the upper bound of the min_free_kbytes value in ee8eb9a5fe863 ("mm/page_alloc: increase default min_free_kbytes bound") I forgot to tweak the above comment to reflect the new value. This patch fixes that mistake. Signed-off-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Rafael Aquini <aquini@redhat.com> Cc: Fabrizio D'Angelo <fdangelo@redhat.com> Link: http://lkml.kernel.org/r/20200624221236.29560-1-jsavitz@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-03vmalloc: fix the owner argument for the new __vmalloc_node_range callersChristoph Hellwig
Fix the recently added new __vmalloc_node_range callers to pass the correct values as the owner for display in /proc/vmallocinfo. Fixes: 800e26b81311 ("x86/hyperv: allocate the hypercall page with only read and execute bits") Fixes: 10d5e97c1bf8 ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page") Fixes: 7a0e27b2a0ce ("mm: remove vmalloc_exec") Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200627075649.2455097-1-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-03mm/cma.c: use exact_nid true to fix possible per-numa cma leakBarry Song
Calling cma_declare_contiguous_nid() with false exact_nid for per-numa reservation can easily cause cma leak and various confusion. For example, mm/hugetlb.c is trying to reserve per-numa cma for gigantic pages. But it can easily leak cma and make users confused when system has memoryless nodes. In case the system has 4 numa nodes, and only numa node0 has memory. if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4 different numa nodes. since exact_nid=false in current code, all 4 numa nodes will get cma successfully from node0, but hugetlb_cma[1 to 3] will never be available to hugepage will only allocate memory from hugetlb_cma[0]. In case the system has 4 numa nodes, both numa node0&2 has memory, other nodes have no memory. if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4 different numa nodes. since exact_nid=false in current code, all 4 numa nodes will get cma successfully from node0 or 2, but hugetlb_cma[1] and [3] will never be available to hugepage as mm/hugetlb.c will only allocate memory from hugetlb_cma[0] and hugetlb_cma[2]. This causes permanent leak of the cma areas which are supposed to be used by memoryless node. Of cource we can workaround the issue by letting mm/hugetlb.c scan all cma areas in alloc_gigantic_page() even node_mask includes node0 only. that means when node_mask includes node0 only, we can get page from hugetlb_cma[1] to hugetlb_cma[3]. But this will cause kernel crash in free_gigantic_page() while it wants to free page by: cma_release(hugetlb_cma[page_to_nid(page)], page, 1 << order) On the other hand, exact_nid=false won't consider numa distance, it might be not that useful to leverage cma areas on remote nodes. I feel it is much simpler to make exact_nid true to make everything clear. After that, memoryless nodes won't be able to reserve per-numa CMA from other nodes which have memory. Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Roman Gushchin <guro@fb.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Aslan Bakirov <aslan@fb.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andreas Schaufler <andreas.schaufler@gmx.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Rik van Riel <riel@surriel.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200628074345.27228-1-song.bao.hua@hisilicon.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-03samples/vfs: avoid warning in statx overrideKees Cook
Something changed recently to uncover this warning: samples/vfs/test-statx.c:24:15: warning: `struct foo' declared inside parameter list will not be visible outside of this definition or declaration 24 | #define statx foo | ^~~ Which is due the use of "struct statx" (here, "struct foo") in a function prototype argument list before it has been defined: int # 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" foo # 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4 (int __dirfd, const char *__restrict __path, int __flags, unsigned int __mask, struct # 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" foo # 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4 *__restrict __buf) __attribute__ ((__nothrow__ , __leaf__)) __attribute__ ((__nonnull__ (2, 5))); Add explicit struct before #include to avoid warning. Fixes: f1b5618e013a ("vfs: Add a sample program for the new mount API") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Link: http://lkml.kernel.org/r/202006282213.C516EA6@keescook Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-03mm/hugetlb.c: fix pages per hugetlb calculationMike Kravetz
The routine hpage_nr_pages() was incorrectly used to calculate the number of base pages in a hugetlb page. hpage_nr_pages is designed to be called for THP pages and will return HPAGE_PMD_NR for hugetlb pages of any size. Due to the context in which hpage_nr_pages was called, it is unlikely to produce a user visible error. The routine with the incorrect call is only exercised in the case of hugetlb memory error or migration. In addition, this would need to be on an architecture which supports huge page sizes less than PMD_SIZE. And, the vma containing the huge page would also need to smaller than PMD_SIZE. Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200629185003.97202-1-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-03Merge tag 'xfs-5.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fix from Darrick Wong: "Fix a use-after-free bug when the fs shuts down" * tag 'xfs-5.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix use-after-free on CIL context on shutdown
2020-07-03Merge branch 'mvpp2-XDP-support'David S. Miller
Matteo Croce says: ==================== mvpp2: XDP support Add XDP support to mvpp2. This series converts the driver to the page_pool API for RX buffer management, and adds native XDP support. XDP support comes with extack error reporting and statistics as well. These are the performance numbers, as measured by Sven: SKB fwd page pool: Rx bps 390.38 Mbps Rx pps 762.46 Kpps XDP fwd: Rx bps 1.39 Gbps Rx pps 2.72 Mpps XDP Drop: eth0: 12.9 Mpps eth1: 4.1 Mpps ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03mvpp2: xdp ethtool statsSven Auhagen
Add ethtool statistics for XDP. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03mvpp2: XDP TX supportMatteo Croce
Add the transmit part of XDP support, which includes: - support for XDP_TX in mvpp2_xdp() - .ndo_xdp_xmit hook for AF_XDP and XDP_REDIRECT with mvpp2 as destination mvpp2_xdp_submit_frame() is a generic function which is called by mvpp2_xdp_xmit_back() when doing XDP_TX, and by mvpp2_xdp_xmit when doing AF_XDP or XDP_REDIRECT target. The buffer allocation has been reworked to be able to map the buffers as DMA_FROM_DEVICE or DMA_BIDIRECTIONAL depending if native XDP is in use or not. Co-developed-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03mvpp2: add basic XDP supportMatteo Croce
Add XDP native support. By now only XDP_DROP, XDP_PASS and XDP_REDIRECT verdicts are supported. Co-developed-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03mvpp2: use page_pool allocatorMatteo Croce
Use the page_pool API for memory management. This is a prerequisite for native XDP support. Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03mvpp2: refactor BM pool init percpu codeMatteo Croce
In mvpp2_swf_bm_pool_init_percpu(), a reference to a struct mvpp2_bm_pool is obtained traversing multiple structs, when a local variable already points to the same object. Fix it and, while at it, give the variable a meaningful name. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03selftests/net: add ipv6 test coverage in rxtimestamp testtannerlove
Add the options --ipv4, --ipv6 to specify running over ipv4 and/or ipv6. If neither is specified, then run both. Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03Merge branch 'net-ipa-fix-HOLB-timer-register-use'David S. Miller
Alex Elder says: ==================== net: ipa: fix HOLB timer register use The function ipa_reg_init_hol_block_timer_val() generates the value to write into the HOL_BLOCK_TIMER endpoint configuration register, to represent a given timeout value (in microseconds). It only supports a timer value of 0 though, in part because that's sufficient, but mainly because there was some confusion about how the register is formatted in newer hardware. I got clarification about the register format, so this series fixes ipa_reg_init_hol_block_timer_val() to work for any supported delay value. The delay is based on the IPA core clock, so determining the value to write for a given period requires access to the current core clock rate. So the first patch just creates a new function to provide that. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03net: ipa: fix HOLB timer calculationAlex Elder
For IPA v4.2, the exact interpretation of the register that defines the timeout for avoiding head-of-line blocking was a little unclear. We're only assigning a 0 timeout to it right now, so that wasn't very important. But now that I know how it's supposed to work, I'm fixing it. The register represents a tick counter, where each tick is equal to 128 IPA core clock cycles. For IPA v3.5.1, the register contains a simple counter value. But for IPA v4.2, the register contains two fields, base and scale, which approximate the tick counter as: ticks = base << scale The base and scale values to use for a given tick count are computed using clever bit operations, and measures are taken to make the resulting time period as close as possible to that requested. There's no need for ipa_endpoint_init_hol_block_timer() to return an error, so change its return type to void. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03net: ipa: introduce ipa_clock_rate()Alex Elder
Create a new function that returns the current rate of the IPA core clock. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03ipv6/ping: set skb->mark on icmpv6 socketsWillem de Bruijn
IPv6 ping sockets route based on fwmark, but do not yet set skb->mark. Add this. IPv4 ping sockets also do both. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03sched: consistently handle layer3 header accesses in the presence of VLANsToke Høiland-Jørgensen
There are a couple of places in net/sched/ that check skb->protocol and act on the value there. However, in the presence of VLAN tags, the value stored in skb->protocol can be inconsistent based on whether VLAN acceleration is enabled. The commit quoted in the Fixes tag below fixed the users of skb->protocol to use a helper that will always see the VLAN ethertype. However, most of the callers don't actually handle the VLAN ethertype, but expect to find the IP header type in the protocol field. This means that things like changing the ECN field, or parsing diffserv values, stops working if there's a VLAN tag, or if there are multiple nested VLAN tags (QinQ). To fix this, change the helper to take an argument that indicates whether the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we make sure to skip all of them, so behaviour is consistent even in QinQ mode. To make the helper usable from the ECN code, move it to if_vlan.h instead of pkt_sched.h. v3: - Remove empty lines - Move vlan variable definitions inside loop in skb_protocol() - Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and bpf_skb_ecn_set_ce() v2: - Use eth_type_vlan() helper in skb_protocol() - Also fix code that reads skb->protocol directly - Change a couple of 'if/else if' statements to switch constructs to avoid calling the helper twice Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com> Fixes: d8b9605d2697 ("net: sched: fix skb->protocol use in case of accelerated vlan path") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03selftests/bpf: Fix compilation error of bpf_iter_task_stack.cSong Liu
BPF selftests show a compilation error as follows: libbpf: invalid relo for 'entries' in special section 0xfff2; forgot to initialize global var?.. Fix it by initializing 'entries' to zeros. Fixes: c7568114bc56 ("selftests/bpf: Add bpf_iter test with bpf_get_task_stack()") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200703181719.3747072-1-songliubraving@fb.com
2020-07-03bpf: Fix bpftool without skeleton code enabledJohn Fastabend
Fix segfault from bpftool by adding emit_obj_refs_plain when skeleton code is disabled. Tested by deleting BUILD_BPF_SKELS in Makefile. We found this doing backports for Cilium when a testing image pulled in latest bpf-next bpftool, but kept using an older clang-7. # ./bpftool prog show Error: bpftool built without PID iterator support 3: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2020-07-01T08:01:29-0700 uid 0 Segmentation fault Fixes: d53dee3fe013 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs") Reported-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/159375071997.14984.17404504293832961401.stgit@john-XPS-13-9370
2020-07-03net/xen-netfront: add kernel TX timestampsDaniel Drown
This adds kernel TX timestamps to the xen-netfront driver. Tested with chrony on an AWS EC2 instance. Signed-off-by: Daniel Drown <dan-netdev@drown.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03net: bcmgenet: Allow changing carrier from user-spaceFlorian Fainelli
The GENET driver interfaces with internal MoCA interface as well as external MoCA chips like the BCM6802/6803 through a fixed link interface. It is desirable for the mocad user-space daemon to be able to control the carrier state based upon out of band messages that it receives from the MoCA chip. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03Merge tag 'mlx5-updates-2020-07-02' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-07-02 Rx and Tx devlink health reporters enhancements. 1) Code cleanup 2) devlink output format improvements 3) Print more useful info on devlink health diagnose output 4) TX timeout recovery, on a single SQ recover failure, stop the loop and reset all rings (re-open netdev). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03Merge tag 'pci-v5.8-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Fix a pcie_find_root_port() simplification that broke power management because it didn't handle the edge case of finding the Root Port of a Root Port itself (Mika Westerberg)"" * tag 'pci-v5.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Make pcie_find_root_port() work for Root Ports
2020-07-03Merge tag 'acpi-5.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "Add a new device ID for Intel Tiger Lake to the DPTF battery participant driver (Srinivas Pandruvada) and fix the Tiger Lake fan device ID (Sumeet Pawnikar)" * tag 'acpi-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: fan: Fix Tiger Lake ACPI device ID ACPI: DPTF: Add battery participant for TigerLake
2020-07-03Merge tag 'gfs2-v5.8-rc3.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fixes from Andreas Gruenbacher: "Various gfs2 fixes" * tag 'gfs2-v5.8-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: The freeze glock should never be frozen gfs2: When freezing gfs2, use GL_EXACT and not GL_NOCACHE gfs2: read-only mounts should grab the sd_freeze_gl glock gfs2: freeze should work on read-only mounts gfs2: eliminate GIF_ORDERED in favor of list_empty gfs2: Don't sleep during glock hash walk gfs2: fix trans slab error when withdraw occurs inside log_flush gfs2: Don't return NULL from gfs2_inode_lookup
2020-07-03Merge tag 'drm-fixes-2020-07-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Pretty usual rc4 pull: two usual amdgpu, i915 pulls, and some misc arm driver fixes. The bigger bit is including the asm sources for some GPU shaders that were contained in the i915 driver, otherwise it's pretty much business as usual. dma-buf: - fix a use-after-free bug amdgpu: - Fix for vega20 boards without RAS support - DC bandwidth revalidation fix - Fix Renoir vram info fetching - Fix hwmon freq printing i915: - GVT fixes - Two missed MMIO handler fixes for SKL/CFL - Fix mask register bits check - Fix one lockdep error for debugfs entry access - Include asm sources for render cache clear batches msm: - memleak fix - display block fix - address space fixes exynos: - error value and reference count fix - error print removal sun4i: - remove HPD polling" * tag 'drm-fixes-2020-07-03' of git://anongit.freedesktop.org/drm/drm: (22 commits) drm/amdgpu: use %u rather than %d for sclk/mclk drm/amdgpu/atomfirmware: fix vram_info fetching for renoir drm/amd/display: Only revalidate bandwidth on medium and fast updates drm: sun4i: hdmi: Remove extra HPD polling drm/i915: Include asm sources for {ivb, hsw}_clear_kernel.c drm/exynos: fix ref count leak in mic_pre_enable drm/exynos: Properly propagate return value in drm_iommu_attach_device() drm/exynos: Remove dev_err() on platform_get_irq() failure drm/amd/powerplay: Fix NULL dereference in lock_bus() on Vega20 w/o RAS dma-buf: Move dma_buf_release() from fops to dentry_ops drm/msm: Fix up the rest of the messed up address sizes drm/msm: Fix setup of a6xx create_address_space. drm/msm: Fix address space size after refactor. drm/i915/gvt: Use GFP_ATOMIC instead of GFP_KERNEL in atomic context drm/i915/gvt: Fix incorrect check of enabled bits in mask registers drm/i915/gvt: Fix two CFL MMIO handling caused by regression. drm/i915/gvt: Add one missing MMIO handler for D_SKL_PLUS drm/msm: Fix 0xfffflub in "Refactor address space initialization" drm/msm/dpu: allow initialization of encoder locks during encoder init drm/msm/dpu: fix error return code in dpu_encoder_init ...
2020-07-03Call sysctl_head_finish on errorMatthew Wilcox (Oracle)
This error path returned directly instead of calling sysctl_head_finish(). Fixes: ef9d965bc8b6 ("sysctl: reject gigantic reads/write to sysctl files") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-07-03KVM: VMX: Use KVM_POSSIBLE_CR*_GUEST_BITS to initialize guest/host masksSean Christopherson
Use the "common" KVM_POSSIBLE_CR*_GUEST_BITS defines to initialize the CR0/CR4 guest host masks instead of duplicating most of the CR4 mask and open coding the CR0 mask. SVM doesn't utilize the masks, i.e. the masks are effectively VMX specific even if they're not named as such. This avoids duplicate code, better documents the guest owned CR0 bit, and eliminates the need for a build-time assertion to keep VMX and x86 synchronized. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200703040422.31536-3-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-03KVM: x86: Mark CR4.TSD as being possibly owned by the guestSean Christopherson
Mark CR4.TSD as being possibly owned by the guest as that is indeed the case on VMX. Without TSD being tagged as possibly owned by the guest, a targeted read of CR4 to get TSD could observe a stale value. This bug is benign in the current code base as the sole consumer of TSD is the emulator (for RDTSC) and the emulator always "reads" the entirety of CR4 when grabbing bits. Add a build-time assertion in to ensure VMX doesn't hand over more CR4 bits without also updating x86. Fixes: 52ce3c21aec3 ("x86,kvm,vmx: Don't trap writes to CR4.TSD") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200703040422.31536-2-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-03KVM: x86: Inject #GP if guest attempts to toggle CR4.LA57 in 64-bit modeSean Christopherson
Inject a #GP on MOV CR4 if CR4.LA57 is toggled in 64-bit mode, which is illegal per Intel's SDM: CR4.LA57 57-bit linear addresses (bit 12 of CR4) ... blah blah blah ... This bit cannot be modified in IA-32e mode. Note, the pseudocode for MOV CR doesn't call out the fault condition, which is likely why the check was missed during initial development. This is arguably an SDM bug and will hopefully be fixed in future release of the SDM. Fixes: fd8cb433734ee ("KVM: MMU: Expose the LA57 feature to VM.") Cc: stable@vger.kernel.org Reported-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200703021714.5549-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-03Merge tag 'vfio-ccw-20200703' of ↵Heiko Carstens
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes add a missing include Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-03arm64: Add KRYO4XX silver CPU cores to erratum list 1530923 and 1024718Sai Prakash Ranjan
KRYO4XX silver/LITTLE CPU cores with revision r1p0 are affected by erratum 1530923 and 1024718, so add them to the respective list. The variant and revision bits are implementation defined and are different from the their Cortex CPU counterparts on which they are based on, i.e., r1p0 is equivalent to rdpe. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/7013e8a3f857ca7e82863cc9e34a614293d7f80c.1593539394.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-03arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040Sai Prakash Ranjan
KRYO4XX gold/big CPU core revisions r0p0 to r3p1 are affected by erratum 1463225 and 1418040, so add them to the respective list. The variant and revision bits are implementation defined and are different from the their Cortex CPU counterparts on which they are based on, i.e., (r0p0 to r3p1) is equivalent to (rcpe to rfpf). Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/83780e80c6377c12ca51b5d53186b61241685e49.1593539394.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-03arm64: Add MIDR value for KRYO4XX gold CPU coresSai Prakash Ranjan
Add MIDR value for KRYO4XX gold/big CPU cores which are used in Qualcomm Technologies, Inc. SoCs. This will be used to identify and apply erratum which are applicable for these CPU cores. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/9093fb82e22441076280ca1b729242ffde80c432.1593539394.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-03Merge branch 'acpi-fan'Rafael J. Wysocki
* acpi-fan: ACPI: fan: Fix Tiger Lake ACPI device ID
2020-07-03netfilter: conntrack: refetch conntrack after nf_conntrack_update()Pablo Neira Ayuso
__nf_conntrack_update() might refresh the conntrack object that is attached to the skbuff. Otherwise, this triggers UAF. [ 633.200434] ================================================================== [ 633.200472] BUG: KASAN: use-after-free in nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200478] Read of size 1 at addr ffff888370804c00 by task nfqnl_test/6769 [ 633.200487] CPU: 1 PID: 6769 Comm: nfqnl_test Not tainted 5.8.0-rc2+ #388 [ 633.200490] Hardware name: LENOVO 23259H1/23259H1, BIOS G2ET32WW (1.12 ) 05/30/2012 [ 633.200491] Call Trace: [ 633.200499] dump_stack+0x7c/0xb0 [ 633.200526] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200532] print_address_description.constprop.6+0x1a/0x200 [ 633.200539] ? _raw_write_lock_irqsave+0xc0/0xc0 [ 633.200568] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200594] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200598] kasan_report.cold.9+0x1f/0x42 [ 633.200604] ? call_rcu+0x2c0/0x390 [ 633.200633] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200659] nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200687] ? nf_conntrack_find_get+0x30/0x30 [nf_conntrack] Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1436 Fixes: ee04805ff54a ("netfilter: conntrack: make conntrack userspace helpers work again") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-03tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handlingTom Zanussi
Kernel commit dc4e2801d400 (ring-buffer: Redefine the unimplemented RINGBUF_TYPE_TIME_STAMP) changed the way the ring buffer timestamps work - after that commit the previously unimplemented RINGBUF_TYPE_TIME_STAMP type causes the time delta to be used as a timestamp rather than a delta to be added to the timestamp. The trace-cmd code didn't get updated to handle this, so misinterprets the event data for this case, which causes a cascade of errors, including trace-report not being able to identify synthetic (or any other) events generated by the histogram code (which uses TIME_STAMP mode). For example, the following triggers along with the trace-cmd shown cause an UNKNOWN_EVENT error and trace-cmd report crash: # echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > /sys/kernel/debug/tracing/synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).trace(wakeup_latency,$wakeup_lat,next_pid,next_comm) if next_comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger # trace-cmd record -e wakeup_latency -e sched_wakeup -f comm==\"ping\" ping localhost -c 5 # trace-cmd report CPU 0 is empty CPU 1 is empty CPU 2 is empty CPU 3 is empty CPU 5 is empty CPU 6 is empty CPU 7 is empty cpus=8 ug! no event found for type 0 [UNKNOWN TYPE 0] ug! no event found for type 11520 Segmentation fault (core dumped) After this patch we get the correct interpretation and the events are shown properly: # trace-cmd report CPU 0 is empty CPU 1 is empty CPU 2 is empty CPU 3 is empty CPU 5 is empty CPU 6 is empty CPU 7 is empty cpus=8 <idle>-0 [004] 23284.341392: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23284.341464: wakeup_latency: lat=58, pid=12031, comm=ping <idle>-0 [004] 23285.365303: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23285.365382: wakeup_latency: lat=64, pid=12031, comm=ping <idle>-0 [004] 23286.389290: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23286.389378: wakeup_latency: lat=72, pid=12031, comm=ping <idle>-0 [004] 23287.413213: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23287.413291: wakeup_latency: lat=64, pid=12031, comm=ping Link: http://lkml.kernel.org/r/1567628224.13841.4.camel@kernel.org Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-3-tz.stoyanov@gmail.com Signed-off-by: Tom Zanussi <zanussi@kernel.org> [ Ported from trace-cmd.git ] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200702185703.785094515@goodmis.org Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03tools lib traceevent: Add API to read time information from kbufferSteven Rostedt (Red Hat)
Add the functions kbuffer_subbuf_timestamp() and kbuffer_ptr_delta() to get the timing data stored in the ring buffer that is used to produced the time stamps of the records. This is useful for tools like trace-cmd to be able to display the content of the read data to understand why the records show the time stamps that they do. Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-2-tz.stoyanov@gmail.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [ Ported from trace-cmd.git ] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200702185703.619656282@goodmis.org Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix time chart call treeAdrian Hunter
Using Python version 3.8.2 and PySide2 version 5.14.0, time chart call tree would not expand the tree to the result. Fix by using setExpanded(). Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Charts -> Time chart by CPU Move mouse over middle of chart Right-click and select Show Call Tree Before: displays Call Tree but not expanded to selected time After: displays Call Tree expanded to selected time Fixes: e69d5df75d74d ("perf scripts python: exported-sql-viewer.py: Add ability for Call tree to open at a specified task and time") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix zero id in call tree 'Find' ↵Adrian Hunter
result Using ctrl-F ('Find') would not find 'unknown' because it matches id zero. Fix by excluding id zero from selection. Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Call Tree Press: Ctrl-F Enter: unknown Press: Enter Before: displays 'unknown' not found After: tree is expanded to line showing 'unknown' Fixes: ae8b887c00d3f ("perf scripts python: exported-sql-viewer.py: Add call tree") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix zero id in call graph ↵Adrian Hunter
'Find' result Using ctrl-F ('Find') would not find 'unknown' because it matches id zero. Fix by excluding id zero from selection. Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Context-Sensitive Call Graph Press: Ctrl-F Enter: unknown Press: Enter Before: gets stuck After: tree is expanded to line showing 'unknown' Fixes: 254c0d820b86d ("perf scripts python: exported-sql-viewer.py: Factor out CallGraphModelBase") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' resultAdrian Hunter
Using Python version 3.8.2 and PySide2 version 5.14.0, ctrl-F ('Find') would not expand the tree to the result. Fix by using setExpanded(). Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Context-Sensitive Call Graph or Reports -> Call Tree Press: Ctrl-F Enter: main Press: Enter Before: line showing 'main' does not display After: tree is expanded to line showing 'main' Fixes: ebd70c7dc2f5f ("perf scripts python: exported-sql-viewer.py: Add ability to find symbols in the call-graph") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf record: Fix duplicated sideband events with Intel PT system wide tracingAdrian Hunter
Commit 0a892c1c9472 ("perf record: Add dummy event during system wide synthesis") reveals an issue with Intel PT system wide tracing. Specifically that Intel PT already adds a dummy tracking event, and it is not the first event. Adding another dummy tracking event causes duplicated sideband events. Fix by checking for an existing dummy tracking event first. Example showing duplicated switch events: Before: # perf record -a -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.895 MB perf.data ] # perf script --no-itrace --show-switch-events | head swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [007] 6390.516223: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [007] 6390.516224: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [002] 6390.516415: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559 swapper 0 [002] 6390.516416: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559 After: # perf record -a -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.868 MB perf.data ] # perf script --no-itrace --show-switch-events | head swapper 0 [005] 6450.567013: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 7179/7181 perf 7181 [005] 6450.567014: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 perf 7181 [005] 6450.567028: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [005] 6450.567029: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 7179/7181 swapper 0 [005] 6450.571699: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [005] 6450.571700: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [005] 6450.571702: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [005] 6450.571703: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [005] 6450.579703: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [005] 6450.579704: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20200629091955.17090-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: export-to-postgresql.py: Fix struct.pack() int argumentAdrian Hunter
Python 3.8 is requiring that arguments being packed as integers are also integers. Add int() accordingly. Before: $ perf record -e intel_pt//u uname $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls 2020-06-25 16:09:10.547256 Creating database... 2020-06-25 16:09:10.733185 Writing to intermediate files... Traceback (most recent call last): File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1106, in synth_data cbr(id, raw_buf) File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1058, in cbr value = struct.pack("!hiqiiiiii", 4, 8, id, 4, cbr, 4, MHz, 4, percent) struct.error: required argument is not an integer Fatal Python error: problem in Python trace event handler Python runtime state: initialized Current thread 0x00007f35d3695780 (most recent call first): <no Python frame> Aborted (core dumped) After: $ dropdb perf_data_db $ rm -rf perf_data_db-perf-data $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls 2020-06-25 16:09:40.990267 Creating database... 2020-06-25 16:09:41.207009 Writing to intermediate files... 2020-06-25 16:09:41.270915 Copying to database... 2020-06-25 16:09:41.382030 Removing intermediate files... 2020-06-25 16:09:41.384630 Adding primary keys 2020-06-25 16:09:41.541894 Adding foreign keys 2020-06-25 16:09:41.677044 Dropping unused tables 2020-06-25 16:09:41.703761 Done Fixes: aba44287a224 ("perf scripts python: export-to-postgresql.py: Export Intel PT power and ptwrite events") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'Arnaldo Carvalho de Melo
To bring in the change made in this cset: e3a9e681adb7 ("x86/entry: Fixup bad_iret vs noinstr") This doesn't cause any functional changes to tooling, just a rebuild. Addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03Merge remote-tracking branch 'torvalds/master' into perf/urgentArnaldo Carvalho de Melo
To synchronize UAPI headers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03gfs2: The freeze glock should never be frozenBob Peterson
Before this patch, some gfs2 code locked the freeze glock with LM_FLAG_NOEXP (Do not freeze) flag, and some did not. We never want to freeze the freeze glock, so this patch makes it consistently use LM_FLAG_NOEXP always. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 15:24:39 +0000