| Age | Commit message (Collapse) | Author |
|---|
|
It was reported that the headphone output on Dell Venue 11 Pro 7130
becomes mono after PM resume. The cause seems to be the BIOS setting
up the codec COEF 0x0d bit 0x40 wrongly by some reason, and restoring
the original value 0x2800 fixes the problem.
This patch adds the quirk entry to perform the COEF restore.
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219697
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1235686
Link: https://patch.msgid.link/20250130123301.8996-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The field length description provides the length of each separated key
field in the concatenation, each field gets rounded up to 32-bits to
calculate the pipapo rule width from pipapo_init(). The set key length
provides the total size of the key aligned to 32-bits.
Register-based arithmetics still allows for combining mismatching set
key length and field length description, eg. set key length 10 and field
description [ 5, 4 ] leading to pipapo width of 12.
Cc: stable@vger.kernel.org
Fixes: 3ce67e3793f4 ("netfilter: nf_tables: do not allow mismatch field size and set key length")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Kory Maincent says:
====================
Fix missing rtnl lock in suspend path
Fix the suspend path by ensuring the rtnl lock is held where required.
Calls to open, close and WOL operations must be performed under the
rtnl lock to prevent conflicts with ongoing ndo operations.
Discussion about this issue can be found here:
https://lore.kernel.org/netdev/20250120141926.1290763-1-kory.maincent@bootlin.com/
While working on the ravb fix, it was discovered that the sh_eth driver
has the same issue. This patch series addresses both drivers.
I do not have access to hardware for either of these MACs, so it would
be great if maintainers or others with the relevant boards could test
these fixes.
v2: https://lore.kernel.org/r/20250123-fix_missing_rtnl_lock_phy_disconnect-v2-0-e6206f5508ba@bootlin.com
v1: https://lore.kernel.org/r/20250122-fix_missing_rtnl_lock_phy_disconnect-v1-0-8cb9f6f88fd1@bootlin.com
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
====================
Link: https://patch.msgid.link/20250129-fix_missing_rtnl_lock_phy_disconnect-v3-0-24c4ba185a92@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to sh_eth_close, sh_eth_open and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
Fixes: b71af04676e9 ("sh_eth: add more PM methods")
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to ravb_open, ravb_close and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
Without this fix, the following warning is triggered:
[ 39.032969] =============================
[ 39.032983] WARNING: suspicious RCU usage
[ 39.033019] -----------------------------
[ 39.033033] drivers/net/phy/phy_device.c:2004 suspicious
rcu_dereference_protected() usage!
...
[ 39.033597] stack backtrace:
[ 39.033613] CPU: 0 UID: 0 PID: 174 Comm: python3 Not tainted
6.13.0-rc7-next-20250116-arm64-renesas-00002-g35245dfdc62c #7
[ 39.033623] Hardware name: Renesas SMARC EVK version 2 based on
r9a08g045s33 (DT)
[ 39.033628] Call trace:
[ 39.033633] show_stack+0x14/0x1c (C)
[ 39.033652] dump_stack_lvl+0xb4/0xc4
[ 39.033664] dump_stack+0x14/0x1c
[ 39.033671] lockdep_rcu_suspicious+0x16c/0x22c
[ 39.033682] phy_detach+0x160/0x190
[ 39.033694] phy_disconnect+0x40/0x54
[ 39.033703] ravb_close+0x6c/0x1cc
[ 39.033714] ravb_suspend+0x48/0x120
[ 39.033721] dpm_run_callback+0x4c/0x14c
[ 39.033731] device_suspend+0x11c/0x4dc
[ 39.033740] dpm_suspend+0xdc/0x214
[ 39.033748] dpm_suspend_start+0x48/0x60
[ 39.033758] suspend_devices_and_enter+0x124/0x574
[ 39.033769] pm_suspend+0x1ac/0x274
[ 39.033778] state_store+0x88/0x124
[ 39.033788] kobj_attr_store+0x14/0x24
[ 39.033798] sysfs_kf_write+0x48/0x6c
[ 39.033808] kernfs_fop_write_iter+0x118/0x1a8
[ 39.033817] vfs_write+0x27c/0x378
[ 39.033825] ksys_write+0x64/0xf4
[ 39.033833] __arm64_sys_write+0x18/0x20
[ 39.033841] invoke_syscall+0x44/0x104
[ 39.033852] el0_svc_common.constprop.0+0xb4/0xd4
[ 39.033862] do_el0_svc+0x18/0x20
[ 39.033870] el0_svc+0x3c/0xf0
[ 39.033880] el0t_64_sync_handler+0xc0/0xc4
[ 39.033888] el0t_64_sync+0x154/0x158
[ 39.041274] ravb 11c30000.ethernet eth0: Link is Down
Reported-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Closes: https://lore.kernel.org/netdev/4c6419d8-c06b-495c-b987-d66c2e1ff848@tuxon.dev/
Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btusb: mediatek: Add locks for usb_driver_claim_interface()
- L2CAP: accept zero as a special value for MTU auto-selection
- btusb: Fix possible infinite recursion of btusb_reset
- Add ABI doc for sysfs reset
- btnxpuart: Fix glitches seen in dual A2DP streaming
* tag 'for-net-2025-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
Bluetooth: Add ABI doc for sysfs reset
Bluetooth: Fix possible infinite recursion of btusb_reset
Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()
====================
Link: https://patch.msgid.link/20250129210057.1318963-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
both method table pointers in debugfs_fsdata need to be initialized,
obviously, and calculating the bitmap of present methods would also
go better if we start with initialized state.
Fixes: 41a0ecc0997c ("debugfs: get rid of dynamically allocation proxy_ops")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250129191937.GR1977892@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a test to bpf_offload.py for loading a devbound XDP program in
generic mode, checking that it fails correctly.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250127131344.238147-2-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Device-bound programs are used to support RX metadata kfuncs. These
kfuncs are driver-specific and rely on the driver context to read the
metadata. This means they can't work in generic XDP mode. However, there
is no check to disallow such programs from being attached in generic
mode, in which case the metadata kfuncs will be called in an invalid
context, leading to crashes.
Fix this by adding a check to disallow attaching device-bound programs
in generic mode.
Fixes: 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs")
Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Closes: https://lore.kernel.org/r/dae862ec-43b5-41a0-8edf-46c59071cdda@hetzner-cloud.de
Tested-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250127131344.238147-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Testing with iperf3 using the "pasta" protocol splicer has revealed
a problem in the way tcp handles window advertising in extreme memory
squeeze situations.
Under memory pressure, a socket endpoint may temporarily advertise
a zero-sized window, but this is not stored as part of the socket data.
The reasoning behind this is that it is considered a temporary setting
which shouldn't influence any further calculations.
However, if we happen to stall at an unfortunate value of the current
window size, the algorithm selecting a new value will consistently fail
to advertise a non-zero window once we have freed up enough memory.
This means that this side's notion of the current window size is
different from the one last advertised to the peer, causing the latter
to not send any data to resolve the sitution.
The problem occurs on the iperf3 server side, and the socket in question
is a completely regular socket with the default settings for the
fedora40 kernel. We do not use SO_PEEK or SO_RCVBUF on the socket.
The following excerpt of a logging session, with own comments added,
shows more in detail what is happening:
// tcp_v4_rcv(->)
// tcp_rcv_established(->)
[5201<->39222]: ==== Activating log @ net/ipv4/tcp_input.c/tcp_data_queue()/5257 ====
[5201<->39222]: tcp_data_queue(->)
[5201<->39222]: DROPPING skb [265600160..265665640], reason: SKB_DROP_REASON_PROTO_MEM
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 259909392->260034360 (124968), unread 5565800, qlen 85, ofoq 0]
[OFO queue: gap: 65480, len: 0]
[5201<->39222]: tcp_data_queue(<-)
[5201<->39222]: __tcp_transmit_skb(->)
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: tcp_select_window(->)
[5201<->39222]: (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_NOMEM) ? --> TRUE
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
returning 0
[5201<->39222]: tcp_select_window(<-)
[5201<->39222]: ADVERTISING WIN 0, ACK_SEQ: 265600160
[5201<->39222]: [__tcp_transmit_skb(<-)
[5201<->39222]: tcp_rcv_established(<-)
[5201<->39222]: tcp_v4_rcv(<-)
// Receive queue is at 85 buffers and we are out of memory.
// We drop the incoming buffer, although it is in sequence, and decide
// to send an advertisement with a window of zero.
// We don't update tp->rcv_wnd and tp->rcv_wup accordingly, which means
// we unconditionally shrink the window.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 0, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 260040464->260040464 (0), unread 5559696, qlen 85, ofoq 0]
returning 6104 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// After each read, the algorithm for calculating the new receive
// window in __tcp_cleanup_rbuf() finds it is too small to advertise
// or to update tp->rcv_wnd.
// Meanwhile, the peer thinks the window is zero, and will not send
// any more data to trigger an update from the interrupt mode side.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 260099840->260171536 (71696), unread 5428624, qlen 83, ofoq 0]
returning 131072 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// The above pattern repeats again and again, since nothing changes
// between the reads.
[...]
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 265600160->265600160 (0), unread 0, qlen 0, ofoq 0]
returning 54672 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// The receive queue is empty, but no new advertisement has been sent.
// The peer still thinks the receive window is zero, and sends nothing.
// We have ended up in a deadlock situation.
Note that well behaved endpoints will send win0 probes, so the problem
will not occur.
Furthermore, we have observed that in these situations this side may
send out an updated 'th->ack_seq´ which is not stored in tp->rcv_wup
as it should be. Backing ack_seq seems to be harmless, but is of
course still wrong from a protocol viewpoint.
We fix this by updating the socket state correctly when a packet has
been dropped because of memory exhaustion and we have to advertize
a zero window.
Further testing shows that the connection recovers neatly from the
squeeze situation, and traffic can continue indefinitely.
Fixes: e2142825c120 ("net: tcp: send zero-window ACK when no memory")
Cc: Menglong Dong <menglong8.dong@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250127231304.1465565-1-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bgmac allocates new replacement buffer before handling each received
frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU
time. Ideally bgmac should just respect currently set MTU but it isn't
the case right now. For now just revert back to the old limited frame
size.
This change bumps NAT masquerade speed by ~95%.
Since commit 8218f62c9c9b ("mm: page_frag: use initial zero offset for
page_frag_alloc_align()"), the bgmac driver fails to open its network
interface successfully and runs out of memory in the following call
stack:
bgmac_open
-> bgmac_dma_init
-> bgmac_dma_rx_skb_for_slot
-> netdev_alloc_frag
BGMAC_RX_ALLOC_SIZE = 10048 and PAGE_FRAG_CACHE_MAX_SIZE = 32768.
Eventually we land into __page_frag_alloc_align() with the following
parameters across multiple successive calls:
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=0
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=10048
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=20096
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=30144
So in that case we do indeed have offset + fragsz (40192) > size (32768)
and so we would eventually return NULL. Reverting to the older 1500
bytes MTU allows the network driver to be usable again.
Fixes: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[florian: expand commit message about recent commits]
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250127175159.1788246-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michal Luczaj says:
====================
vsock: Transport reassignment and error handling issues
Series deals with two issues:
- socket reference count imbalance due to an unforgiving transport release
(triggered by transport reassignment);
- unintentional API feature, a failing connect() making the socket
impossible to use for any subsequent connect() attempts.
v2: https://lore.kernel.org/20250121-vsock-transport-vs-autobind-v2-0-aad6069a4e8c@rbox.co
v1: https://lore.kernel.org/20250117-vsock-transport-vs-autobind-v1-0-c802c803762d@rbox.co
====================
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-0-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Deliberately fail a connect() attempt; expect error. Then verify that
subsequent attempt (using the same socket) can still succeed, rather than
fail outright.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-6-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fail the autobind, then trigger a transport reassign. Socket might get
unbound from unbound_sockets, which then leads to a reference count
underflow.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-5-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Distill timeout-guarded vsock_connect_fd(). Adapt callers.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-4-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper for socket()+bind(). Adapt callers.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-3-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_err is set when a (connectible) connect() fails. Effectively, this makes
an otherwise still healthy SS_UNCONNECTED socket impossible to use for any
subsequent connection attempts.
Clear sk_err upon trying to establish a connection.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-2-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Preserve sockets bindings; this includes both resulting from an explicit
bind() and those implicitly bound through autobind during connect().
Prevents socket unbinding during a transport reassignment, which fixes a
use-after-free:
1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2)
2. transport->release() calls vsock_remove_bound() without checking if
sk was bound and moved to bound list (refcnt=1)
3. vsock_bind() assumes sk is in unbound list and before
__vsock_insert_bound(vsock_bound_sockets()) calls
__vsock_remove_bound() which does:
list_del_init(&vsk->bound_table); // nop
sock_put(&vsk->sk); // refcnt=0
BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730
Read of size 4 at addr ffff88816b46a74c by task a.out/2057
dump_stack_lvl+0x68/0x90
print_report+0x174/0x4f6
kasan_report+0xb9/0x190
__vsock_bind+0x62e/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x85/0x90
kmem_cache_alloc_noprof+0x131/0x450
sk_prot_alloc+0x5b/0x220
sk_alloc+0x2c/0x870
__vsock_create.constprop.0+0x2e/0xb60
vsock_create+0xe4/0x420
__sock_create+0x241/0x650
__sys_socket+0xf2/0x1a0
__x64_sys_socket+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x4b/0x70
kmem_cache_free+0x1a1/0x590
__sk_destruct+0x388/0x5a0
__vsock_bind+0x5e1/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:25 refcount_warn_saturate+0xce/0x150
RIP: 0010:refcount_warn_saturate+0xce/0x150
__vsock_bind+0x66d/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: underflow; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:28 refcount_warn_saturate+0xee/0x150
RIP: 0010:refcount_warn_saturate+0xee/0x150
vsock_remove_bound+0x187/0x1e0
__vsock_release+0x383/0x4a0
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x359/0xa80
task_work_run+0x107/0x1d0
do_exit+0x847/0x2560
do_group_exit+0xb8/0x250
__x64_sys_exit_group+0x3a/0x50
x64_sys_call+0xfec/0x14f0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-1-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The part of physical memory that exceeds the size of the linear mapping
will be discarded. When the system starts up normally, a warning message
will be printed to prevent confusion caused by the mismatch between the
system memory and the actual physical memory.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240814062625.19794-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When audit is enabled in a kernel build, and there are no LSMs active
that support LSM labeling, it is possible that local variable lsmctx
in the AUDIT_SIGNAL_INFO handler in audit_receive_msg() could be used
before it is properly initialize. Then kmalloc() will try to allocate
a large amount of memory with the uninitialized length.
This patch corrects this problem by initializing the lsmctx to a safe
value when it is declared, which avoid errors like:
WARNING: CPU: 2 PID: 443 at mm/page_alloc.c:4727 __alloc_pages_noprof
...
ra: 9000000003059644 ___kmalloc_large_node+0x84/0x1e0
ERA: 900000000304d588 __alloc_pages_noprof+0x4c8/0x1040
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000007 (+FPE +SXE +ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
CPU: 2 UID: 0 PID: 443 Comm: auditd Not tainted 6.13.0-rc1+ #1899
...
Call Trace:
[<9000000002def6a8>] show_stack+0x30/0x148
[<9000000002debf58>] dump_stack_lvl+0x68/0xa0
[<9000000002e0fe18>] __warn+0x80/0x108
[<900000000407486c>] report_bug+0x154/0x268
[<90000000040ad468>] do_bp+0x2a8/0x320
[<9000000002dedda0>] handle_bp+0x120/0x1c0
[<900000000304d588>] __alloc_pages_noprof+0x4c8/0x1040
[<9000000003059640>] ___kmalloc_large_node+0x80/0x1e0
[<9000000003061504>] __kmalloc_noprof+0x2c4/0x380
[<9000000002f0f7ac>] audit_receive_msg+0x764/0x1530
[<9000000002f1065c>] audit_receive+0xe4/0x1c0
[<9000000003e5abe8>] netlink_unicast+0x340/0x450
[<9000000003e5ae9c>] netlink_sendmsg+0x1a4/0x4a0
[<9000000003d9ffd0>] __sock_sendmsg+0x48/0x58
[<9000000003da32f0>] __sys_sendto+0x100/0x170
[<9000000003da3374>] sys_sendto+0x14/0x28
[<90000000040ad574>] do_syscall+0x94/0x138
[<9000000002ded318>] handle_syscall+0xb8/0x158
Fixes: 6fba89813ccf333d ("lsm: ensure the correct LSM context releaser")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[PM: resolved excessive line length in the backtrace]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The string allocated in sym_warn_unmet_dep() is never freed, leading
to a memory leak when an unmet dependency is detected.
Fixes: f8f69dc0b4e0 ("kconfig: make unmet dependency warnings readable")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
|
|
Most 'make *config' commands use .config as the base configuration file.
When .config does not exist, Kconfig tries to load a file listed in
KCONFIG_DEFCONFIG_LIST instead.
However, since commit b75b0a819af9 ("kconfig: change defconfig_list
option to environment variable"), warning messages have displayed an
incorrect file name in such cases.
Below is a demonstration using Debian Trixie. While loading
/boot/config-6.12.9-amd64, the warning messages incorrectly show .config
as the file name.
With this commit, the correct file name is displayed in warnings.
[Before]
$ rm -f .config
$ make config
#
# using defaults found in /boot/config-6.12.9-amd64
#
.config:6804:warning: symbol value 'm' invalid for FB_BACKLIGHT
.config:9895:warning: symbol value 'm' invalid for ANDROID_BINDER_IPC
[After]
$ rm -f .config
$ make config
#
# using defaults found in /boot/config-6.12.9-amd64
#
/boot/config-6.12.9-amd64:6804:warning: symbol value 'm' invalid for FB_BACKLIGHT
/boot/config-6.12.9-amd64:9895:warning: symbol value 'm' invalid for ANDROID_BINDER_IPC
Fixes: b75b0a819af9 ("kconfig: change defconfig_list option to environment variable")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This new mount option allows to completely disable creating new reparse
points. When -o sfu or -o mfsymlinks or -o symlink= is not specified then
creating any special file (fifo, socket, symlink, block and char) will fail
with -EOPNOTSUPP error.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently Linux CIFS client creates a new symlink of the first flavor which
is allowed by mount options, parsed in this order: -o (no)mfsymlinks,
-o (no)sfu, -o (no)unix (+ its aliases) and -o reparse=[type].
Introduce a new mount option -o symlink= for explicitly choosing a symlink
flavor. Possible options are:
-o symlink=default - The default behavior, like before this change.
-o symlink=none - Disallow creating a new symlinks
-o symlink=native - Create as native SMB symlink reparse point
-o symlink=unix - Create via SMB1 unix extension command
-o symlink=mfsymlinks - Create as regular file of mfsymlinks format
-o symlink=sfu - Create as regular system file of SFU format
-o symlink=nfs - Create as NFS reparse point
-o symlink=wsl - Create as WSL reparse point
So for example specifying -o sfu,mfsymlinks,symlink=native will allow to
parse symlinks also of SFU and mfsymlinks types (which are disabled by
default unless mount option is explicitly specified), but new symlinks will
be created under native SMB type (which parsing is always enabled).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If the SMB symlink is stored on NT server in absolute form then it points
to the NT object hierarchy, which is different from POSIX one and needs
some conversion / mapping.
To make interoperability with Windows SMB server and WSL subsystem, reuse
its logic of mapping between NT paths and POSIX paths into Linux SMB
client.
WSL subsystem on Windows uses for -t drvfs mount option -o symlinkroot=
which specifies the POSIX path where are expected to be mounted lowercase
Windows drive letters (without colon).
Do same for Linux SMB client and add a new mount option -o symlinkroot=
which mimics the drvfs mount option of the same name. It specifies where in
the Linux VFS hierarchy is the root of the DOS / Windows drive letters, and
translates between absolute NT-style symlinks and absolute Linux VFS
symlinks. Default value of symlinkroot is "/mnt", same what is using WSL.
Note that DOS / Windows drive letter symlinks are just subset of all
possible NT-style symlinks. Drive letters live in NT subtree \??\ and
important details about NT paths and object hierarchy are in the comments
in this change.
When symlink target location from non-POSIX SMB server is in absolute form
(indicated by absence of SYMLINK_FLAG_RELATIVE) then it is converted to
Linux absolute symlink according to symlinkroot configuration.
And when creating a new symlink on non-POSIX SMB server in absolute form
then Linux absolute target is converted to NT-style according to
symlinkroot configuration.
When SMB server is POSIX, then this change does not affect neither reading
target location of symlink, nor creating a new symlink. It is expected that
POSIX SMB server works with POSIX paths where the absolute root is /.
This change improves interoperability of absolute SMB symlinks with Windows
SMB servers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For checking if path is reparse point and setting data->reparse_point
member, it is enough to check if ATTR_REPARSE is present.
It is not required to call CIFS_open() without OPEN_REPARSE_POINT and
checking for -EOPNOTSUPP error code.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Member 'symlink' is part of the union in struct cifs_open_info_data. Its
value is assigned on few places, but is always read through another union
member 'reparse_point'. So to make code more readable, always use only
'reparse_point' member and drop whole union structure. No function change.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are some incorrect information about individual SMB permission
constants like WRITE_DAC can change ownership, or incomplete information to
distinguish between ACL types (discretionary vs system) and there is
completely missing information how permissions apply for directory objects
and what is meaning of GENERIC_* bits.
Also there is missing constant for MAXIMUM_ALLOWED permission.
Fix and extend description of all SMB permission constants to match the
reality, how the reference Windows SMB / NTFS implementation handles them.
Links to official Microsoft documentation related to permissions:
https://learn.microsoft.com/en-us/windows/win32/fileio/file-access-rights-constants
https://learn.microsoft.com/en-us/windows/win32/secauthz/access-mask
https://learn.microsoft.com/en-us/windows/win32/secauthz/standard-access-rights
https://learn.microsoft.com/en-us/windows/win32/secauthz/generic-access-rights
https://learn.microsoft.com/en-us/windows/win32/api/winternl/nf-winternl-ntcreatefile
https://learn.microsoft.com/en-us/windows-hardware/drivers/ddi/ntifs/nf-ntifs-ntcreatefile
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
to common/smb2pdu.h
Function parse_reparse_posix() parses NFS-style reparse points, which are
used only by Windows NFS server since Windows Server 2012 version. This
style is not understood by Microsoft POSIX/Interix/SFU/SUA subsystems.
So make it clear that parse_reparse_posix() function and reparse_posix_data
structure are not POSIX general, but rather NFS specific.
All reparse buffer structures are defined in common/smb2pdu.h and have
_buffer suffix. So move struct reparse_posix_data from client/cifspdu.h to
common/smb2pdu.h and rename it to reparse_nfs_data_buffer for consistency.
Note that also SMB specification in [MS-FSCC] document, section 2.1.2.6
defines it under name "Network File System (NFS) Reparse Data Buffer".
So use this name for consistency.
Having this structure in common/smb2pdu.h can be useful for ksmbd server
code as NFS-style reparse points is the preferred way for implementing
support for special files.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Linux SMB client already supports more reparse point types but only the
reparse_posix_data is defined in union of struct cifs_open_info_data.
This union is currently used as implicit casting between point types.
With this code style, it hides information that union is used for pointer
casting, and just in mknod_nfs() and posix_reparse_to_fattr() functions.
Other reparse point buffers do not use this kind of casting. So remove
reparse_posix_data from reparse part of struct cifs_open_info_data and for
all cases of reparse buffer use just struct reparse_data_buffer *buf.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This parameter is always true, so remove it and also remove dead code which
is never called (for all false code paths).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB1 callback get_cifs_acl_by_fid() currently ignores its last argument and
therefore ignores request for SACL_SECINFO. Fix this issue by correctly
propagating info argument from get_cifs_acl() and get_cifs_acl_by_fid() to
CIFSSMBGetCIFSACL() function and pass SACL_SECINFO when requested.
For accessing SACLs it is needed to open object with SYSTEM_SECURITY
access. Pass this flag when trying to get or set SACLs.
Same logic is in the SMB2+ code path.
This change fixes getting and setting of "system.cifs_ntsd_full" and
"system.smb3_ntsd_full" xattrs over SMB1 as currently it silentely ignored
SACL part of passed xattr buffer.
Fixes: 3970acf7ddb9 ("SMB3: Add support for getting and setting SACLs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Check if the server honored ATTR_SYSTEM flag by CREATE_OPTION_SPECIAL
option. If not then server does not support ATTR_SYSTEM and newly
created file is not SFU compatible, which means that the call failed.
If CREATE was successful but either setting ATTR_SYSTEM failed or
writing type/data information failed then remove the intermediate
object created by CREATE. Otherwise intermediate empty object stay
on the server.
This ensures that if the creating of SFU files with system attribute is
unsupported by the server then no empty file stay on the server as a result
of unsupported operation.
This is for example case with Samba server and Linux tmpfs storage without
enabled xattr support (where Samba stores ATTR_SYSTEM bit).
Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Major and minor numbers for char and block devices are mandatory for stat.
So check that the WSL EA $LXDEV is present for WSL CHR and BLK reparse
points.
WSL reparse point tag determinate type of the file. But file type is
present also in the WSL EA $LXMOD. So check that both file types are same.
Fixes: 78e26bec4d6d ("smb: client: parse uid, gid, mode and dev from WSL reparse points")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
STATUS_PRIVILEGE_NOT_HELD indicates that user does not have privilege to
issue some operation, for example to create symlink.
Currently STATUS_PRIVILEGE_NOT_HELD is translated to -EIO. Change it to
-EPERM which better describe this error code.
Note that there is no ERR* code usable in ntstatus_to_dos_map[] table which
can be used to -EPERM translation, so do explicit translation in
map_smb_to_linux_error() function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- SoundWire multi lane support to use multiple lanes if supported
- Stream handling of DEPREPARED state
- AMD wake register programming for power off mode
* tag 'soundwire-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: clear wake enable register for power off mode
soundwire: generic_bandwidth_allocation: count the bandwidth of active streams only
SoundWire: pass stream to compute_params()
soundwire: generic_bandwidth_allocation: add lane in sdw_group_params
soundwire: generic_bandwidth_allocation: select data lane
soundwire: generic_bandwidth_allocation: check required freq accurately
soundwire: generic_bandwidth_allocation: correct clk_freq check in sdw_select_row_col
Soundwire: generic_bandwidth_allocation: set frame shape on fly
Soundwire: stream: program BUSCLOCK_SCALE
Soundwire: add sdw_slave_get_scale_index helper
soundwire: generic_bandwidth_allocation: skip DEPREPARED streams
soundwire: stream: set DEPREPARED state earlier
soundwire: add lane_used_bandwidth in struct sdw_bus
soundwire: mipi_disco: read lane mapping properties from ACPI
soundwire: add lane field in sdw_port_runtime
soundwire: bus: Move irq mapping cleanup into devres
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Lots of Qualcomm and Rockchip device support.
New Support:
- Qualcomm SAR2130P qmp usb, SAR2130P qmp pcie, QCS615 qusb2 and
PCIe, IPQ5424 qmp pcie, IPQ5424 QUSB2 and USB3 PHY
- Rockchip rk3576 combo phy support
Updates:
- Drop Shengyang for JH7110 maintainer
- Freescale hdmi register calculation optimization
- Rockchip pcie phy mutex and regmap updates"
* tag 'phy-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (37 commits)
dt-bindings: phy: qcom,qmp-pcie: document the SM8350 two lanes PCIe PHY
phy: rockchip: phy-rockchip-typec: Fix Copyright description
dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the IPQ5424 QMP PCIe PHYs
phy: qcom-qusb2: Add support for QCS615
dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings
phy: core: Simplify API of_phy_simple_xlate() implementation
phy: sun4i-usb: Remove unused of_gpio.h
phy: HiSilicon: Don't use "proxy" headers
phy: samsung-ufs: switch back to syscon_regmap_lookup_by_phandle()
phy: qualcomm: qmp-pcie: add support for SAR2130P
phy: qualcomm: qmp-pcie: define several new registers
phy: qualcomm: qmp-pcie: split PCS_LANE1 region
phy: qualcomm: qmp-combo: add support for SAR2130P
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SAR2130P compatible
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add SAR2130P compatible
phy: freescale: fsl-samsung-hdmi: Clean up fld_tg_code calculation
phy: freescale: fsl-samsung-hdmi: Stop searching when exact match is found
phy: freescale: fsl-samsung-hdmi: Expand Integer divider range
phy: rockchip-naneng-combo: add rk3576 support
dt-bindings: phy: rockchip: add rk3576 compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A bunch of new device support and updates to few drivers, biggest of
them amd ones.
New support:
- TI J722S CSI BCDMA controller support
- Intel idxd Panther Lake family platforms
- Allwinner F1C100s suniv DMA
- Qualcomm QCS615, QCS8300, SM8750, SA8775P GPI dma controller support
- AMD ae4dma controller support and reorganisation of amd driver
Updates:
- Channel page support for Nvidia Tegra210 adma driver
- Freescale support for S32G based platforms
- Yamilfy atmel dma bindings"
* tag 'dmaengine-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (45 commits)
dmaengine: idxd: Enable Function Level Reset (FLR) for halt
dmaengine: idxd: Refactor halt handler
dmaengine: idxd: Add idxd_device_config_save() and idxd_device_config_restore() helpers
dmaengine: idxd: Binding and unbinding IDXD device and driver
dmaengine: idxd: Add idxd_pci_probe_alloc() helper
dt-bindings: dma: atmel: Convert to json schema
dt-bindings: dma: st-stm32-dmamux: Add description for dma-cell values
dmaengine: qcom: gpi: Add GPI immediate DMA support for SPI protocol
dt-bindings: dma: adi,axi-dmac: deprecate adi,channels node
dt-bindings: dma: adi,axi-dmac: convert to yaml schema
dmaengine: mv_xor: switch to for_each_child_of_node_scoped()
dmaengine: bcm2835-dma: Prevent suspend if DMA channel is busy
dmaengine: tegra210-adma: Support channel page
dt-bindings: dma: Support channel page to nvidia,tegra210-adma
dmaengine: ti: k3-udma: Add support for J722S CSI BCDMA
dt-bindings: dma: ti: k3-bcdma: Add J722S CSI BCDMA
dmaengine: ti: edma: fix OF node reference leaks in edma_driver
dmaengine: ti: edma: make the loop condition simpler in edma_probe()
dmaengine: fsl-edma: read/write multiple registers in cyclic transactions
dmaengine: fsl-edma: add support for S32G based platforms
...
|
|
One of the possible ways to enable the input MTU auto-selection for L2CAP
connections is supposed to be through passing a special "0" value for it
as a socket option. Commit [1] added one of those into avdtp. However, it
simply wouldn't work because the kernel still treats the specified value
as invalid and denies the setting attempt. Recorded BlueZ logs include the
following:
bluetoothd[496]: profiles/audio/avdtp.c:l2cap_connect() setsockopt(L2CAP_OPTIONS): Invalid argument (22)
[1]: https://github.com/bluez/bluez/commit/ae5be371a9f53fed33d2b34748a95a5498fd4b77
Found by Linux Verification Center (linuxtesting.org).
Fixes: 4b6e228e297b ("Bluetooth: Auto tune if input MTU is set to 0")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes a regression caused by previous commit for fixing truncated
ACL data, which is causing some intermittent glitches when running two
A2DP streams.
serdev_device_write_buf() is the root cause of the glitch, which is
reverted, and the TX work will continue to write until the queue is empty.
This change fixes both issues. No A2DP streaming glitches or truncated
ACL data issue observed.
Fixes: 8023dd220425 ("Bluetooth: btnxpuart: Fix driver sending truncated data")
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The functionality was implemented in commit 0f8a00137411 ("Bluetooth:
Allow reset via sysfs")
Fixes: 0f8a00137411 ("Bluetooth: Allow reset via sysfs")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The function enters infinite recursion if the HCI device doesn't support
GPIO reset: btusb_reset -> hdev->reset -> vendor_reset -> btusb_reset...
btusb_reset shouldn't call hdev->reset after commit f07d478090b0
("Bluetooth: Get rid of cmd_timeout and use the reset callback")
Fixes: f07d478090b0 ("Bluetooth: Get rid of cmd_timeout and use the reset callback")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The documentation for usb_driver_claim_interface() says that "the
device lock" is needed when the function is called from places other
than probe(). This appears to be the lock for the USB interface
device. The Mediatek btusb code gets called via this path:
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
usb_driver_claim_interface
btusb_mtk_claim_iso_intf
btusb_mtk_setup
hci_dev_open_sync
hci_power_on
process_scheduled_works
worker_thread
kthread
With the above call trace the device lock hasn't been claimed. Claim
it.
Without this fix, we'd sometimes see the error "Failed to claim iso
interface". Sometimes we'd even see worse errors, like a NULL pointer
dereference (where `intf->dev.driver` was NULL) with a trace like:
Call trace:
usb_suspend_both
usb_runtime_suspend
__rpm_callback
rpm_suspend
pm_runtime_work
process_scheduled_works
Both errors appear to be fixed with the proper locking.
Fixes: ceac1cb0259d ("Bluetooth: btusb: mediatek: add ISO data transmission functions")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that have come in during the merge window: one that
operates the TPS6287x devices more within the design spec and can
prevent current surges when changing voltages and another more trivial
one for error message formatting"
* tag 'regulator-fix-v6.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Add missing newline character
regulator: TPS6287X: Use min/max uV to get VRANGE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Three minor fixes"
* tag 'for-linus-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: update pvcalls_front_accept prototype
Grab mm lock before grabbing pt lock
xen: pcpu: remove unnecessary __ref annotation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
"A tweak to the HMAT output that was acked by Rafael, a prep patch for
CXL type2 devices support that's coming soon, refactoring of the CXL
regblock enumeration code, and a series of patches to update the event
records to CXL spec r3.1:
- Move HMAT printouts to pr_debug()
- Add CXL type2 support to cxl_dvsec_rr_decode() in preparation for
type2 support
- A series that updates CXL event records to spec r3.1 and related
changes
- Refactoring of cxl_find_regblock_instance() to count regblocks"
* tag 'cxl-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/regs: Refactor out functions to count regblocks of given type
cxl/test: Update test code for event records to CXL spec rev 3.1
cxl/events: Update Memory Module Event Record to CXL spec rev 3.1
cxl/events: Update DRAM Event Record to CXL spec rev 3.1
cxl/events: Update General Media Event Record to CXL spec rev 3.1
cxl/events: Add Component Identifier formatting for CXL spec rev 3.1
cxl/events: Update Common Event Record to CXL spec rev 3.1
cxl/pci: Add CXL Type 1/2 support to cxl_dvsec_rr_decode()
ACPI/HMAT: Move HMAT messages to pr_debug()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix to handle PE state in pseries_eeh_get_state()
- Handle unset of tce window if it was never set
Thanks to Narayana Murty N, Ritesh Harjani (IBM), Shivaprasad G Bhat,
and Vaishnavi Bhat.
* tag 'powerpc-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: Don't unset window if it was never set
powerpc/pseries/eeh: Fix get PE state translation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Simplify the kconfig options for controlling which CRC implementations
are built into the kernel, as was requested by Linus.
This means making the option to disable the arch code visible only
when CONFIG_EXPERT=y, and standardizing on a single generic
implementation of CRC32"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc32: remove other generic implementations
lib/crc: simplify the kconfig options for CRC implementations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl table constification from Joel Granados:
"All ctl_table declared outside of functions and that remain unmodified
after initialization are const qualified.
This prevents unintended modifications to proc_handler function
pointers by placing them in the .rodata section.
This is a continuation of the tree-wide effort started a few releases
ago with the constification of the ctl_table struct arguments in the
sysctl API done in 78eb4ea25cd5 ("sysctl: treewide: constify the
ctl_table argument of proc_handlers")"
* tag 'constfy-sysctl-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
treewide: const qualify ctl_tables where applicable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
"Add support for io-uring communication between kernel and userspace
using IORING_OP_URING_CMD (Bernd Schubert). Following features enable
gains in performance compared to the regular interface:
- Allow processing multiple requests with less syscall overhead
- Combine commit of old and fetch of new fuse request
- CPU/NUMA affinity of queues
Patches were reviewed by several people, including Pavel Begunkov,
io-uring co-maintainer"
* tag 'fuse-update-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: prevent disabling io-uring on active connections
fuse: enable fuse-over-io-uring
fuse: block request allocation until io-uring init is complete
fuse: {io-uring} Prevent mount point hang on fuse-server termination
fuse: Allow to queue bg requests through io-uring
fuse: Allow to queue fg requests through io-uring
fuse: {io-uring} Make fuse_dev_queue_{interrupt,forget} non-static
fuse: {io-uring} Handle teardown of ring entries
fuse: Add io-uring sqe commit and fetch support
fuse: {io-uring} Make hash-list req unique finding functions non-static
fuse: Add fuse-io-uring handling into fuse_copy
fuse: Make fuse_copy non static
fuse: {io-uring} Handle SQEs - register commands
fuse: make args->in_args[0] to be always the header
fuse: Add fuse-io-uring design documentation
fuse: Move request bits
fuse: Move fuse_get_dev to header file
fuse: rename to fuse_dev_end_requests and make non-static
|
