summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-30wifi: mt76: mt7921: get regulatory information from the clc eventMing Yen Hsieh
The clc event can report the radio configuration for the corresponding country and the driver would take it as regulatory information of a certain platform device. This patch would change the clc commnad from no-waiting to waiting for event. For backward compatible, we also add a new nic capability tag to indicate the firmware did support this new clc event from now on. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: add 6GHz power type support for clcMing Yen Hsieh
There are several power type should be supported in 6GHz band. mt7921 apply 6GHz power type from AP settings and clc will setup the corresponding regulatory power. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: enable set txpower for UNII-4Ming Yen Hsieh
support power config for channel 165/173/177 Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: move connac nic capability handling to mt7921Deren Wu
mt76_connac_mcu_get_nic_capability() is used by mt7921 only. It would be better to put the code in chip folder. And we can provide more chip capability information in mt792x_phy without making mt76_phy much bigger. The three functions would be moved to mt7921 folder and renamed. mt76_connac_mcu_parse_tx_resource() mt76_connac_mcu_parse_phy_cap() mt76_connac_mcu_get_nic_capability() Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: reduce spin_lock_bh held up in mt76_dma_rx_cleanupSean Wang
mt76_dma_rx_cleanup would be frequenetly called up to reset the dma rings to be freshed as new ones when switching back from the deep sleep mode to the active mode on mt7921 and mt7922. Shrink the scope of spin_lock_bh in mt76_dma_rx_cleanup being held up to allow the kernel scheduler to be able to switch other tasks in time by reducing the latency. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: remove periodic MPDU TXS requestBenjamin Lin
Remove periodic MPDU TXS request. Get TID and FrameType from SKB instead of TXWI, which is empty for Data Frame after MPDU TXS request is removed, hence prohibiting the establishment of TX BA session. Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: enable PPDU-TxS to hostYi-Chia Hsieh
Enable PPDU TxS by default. This makes the driver able to get Tx rate information from TxS. The driver will also refresh BA session timer on receive of PPDU TxS when WED is on. Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: Add mcu commands for getting sta tx statisticYi-Chia Hsieh
Per peer Tx/Rx statistic can only be obtained by querying WM when WED is on. This patch switches to periodic event reporting in the case of WED being enabled. Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: get tx_retries and tx_failed from txfreeYi-Chia Hsieh
Retrieve tx retries/failed counts from 'txfree done' events and report them via mt7996_sta_statistics(). Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt792x: move some common usb code in mt792x moduleLorenzo Bianconi
Move the following shared usb routines in mt792x module: - mt792xu_stop - mt792x_stop Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt792x: move mt7921_skb_add_usb_sdio_hdr in mt792x moduleLorenzo Bianconi
Since mt7921_skb_add_usb_sdio_hdr is shared between mt7925 and mt7921 drivers, move it in mt792x module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7915 add tc offloading supportFelix Fietkau
This is used for offloading flows from WLAN to Ethernet, or from WLAN to WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chipsDeren Wu
Add mt7925, a new mac80211 driver for the MediaTek Wi-Fi 7 (802.11be) device Filogic 360, which can support Station, AP, P2P, and monitor modes. Filogic 360 supports max 4096-QAM/160MHz radio operation at 6 GHz, 5 GHz, or 2.4 GHz with 2x2 antennas. This chip supports PCIe and USB bus type. mt7925 supports Wi-Fi 6E and EHT rate with single link only at this moment, whereas Wi-Fi 7 and its specific features are working in progress. They will be introduced in further patches. The driver is build tested by Intel's kernel test robot with both GCC and Clang with several architecture. Sparse reports no warnings. There are multiple authors, they are listed in alphabetical order below. Co-developed-by: Hao Zhang <hao.zhang@mediatek.com> Signed-off-by: Hao Zhang <hao.zhang@mediatek.com> Co-developed-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Leon Yen <leon.yen@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Mingyen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Mingyen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Nelson Yu <nelson.yu@mediatek.com> Signed-off-by: Nelson Yu <nelson.yu@mediatek.com> Co-developed-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Co-developed-by: Rong Yan <rong.yan@mediatek.com> Signed-off-by: Rong Yan <rong.yan@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: fix the wrong rate selected in fw for the chanctx driverSean Wang
The variable band should be determined by the ieee80211_chanctx_conf when the driver is a kind of chanctx one e.g mt7921 and mt7922 driver so we added the extension to mt76_connac2_mac_tx_rate_val and mt76_connac_get_he_phy_cap for the firmware can select the proper rate. Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Tested-by: David Ruth <druth@chromium.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921: fix the wrong rate pickup for the chanctx driverSean Wang
The variable band should be determined by the ieee80211_chanctx_conf when the driver is a kind of chanctx one e.g mt7921 and mt7922 driver so we added the extension to mt76_connac2_mac_tx_rate_val by distinguishing if it can support chanctx to fix the incorrect rate pickup. Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: David Ruth <druth@chromium.org> Tested-by: David Ruth <druth@chromium.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: move struct ieee80211_chanctx_conf up to struct mt76_vifSean Wang
Move struct ieee80211_chanctx_conf up to struct mt76_vif to allow the connac2 library can access the struct ieee80211_chanctx_conf * member in struct mt76_vif. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: David Ruth <druth@chromium.org> Tested-by: David Ruth <druth@chromium.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: Drop unnecessary error check for debugfs_create_dir()Jinjie Ruan
debugfs_create_dir() returns ERR_PTR and never return NULL. As Russell suggested, this patch removes the error checking for debugfs_create_dir(). This is because the DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes. The debugfs APIs have a IS_ERR() judge in start_creating() which can handle it gracefully. So these checks are unnecessary. Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7915: fix beamforming availability checkMeiChia Chiu
Without this patch, when ap sets the tx stream number to 2, ap won't send any beamforming packet. Fixes: f89f297aef28 ("mt76: mt7915: fix txbf starec TLV issues") Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7915: update mpdu density capabilityPeter Chiu
Set mpdu density to 2 usec for non-mt7915 Wi-Fi 6 generation chipsets to align to the hardware capability which improves the throughput. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: check vif type before reporting cca and csaPeter Chiu
Do not report cca and csa finish to upper layer on station type vif to prevent warnings caused by setting beacon. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix per-band IEEE80211_CONF_MONITOR flag comparisonShayne Chen
Use the correct ieee80211_conf of each band for IEEE80211_CONF_MONITOR comparison. Fixes: 24e69f6bc3ca ("mt76: fix monitor rx FCS error in DFS channel") Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: get rid of false alamrs of tx emission issuesStanleyYP Wang
When the set_chan_info command is set with CH_SWITCH_NORMAL reason, even if the action is UNI_CHANNEL_RX_PATH, it'll still generate some unexpected tones, which might confuse DFS CAC tests that there are some tone leakages. To get rid of these kinds of false alarms, always bypass DPD calibration when IEEE80211_CONF_IDLE is set. Reviewed-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix potential memory leak of beacon commandsBo Jiao
Fix potential memory leak when setting beacon and inband discovery commands. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: check sta rx control frame to multibss capabilityAllen Ye
Add CAP3_RX_CTRL_FRAME_TO_MULTIBSS check when setting sta_muru_tlv, which is used to get stations's capability of receiving control frames when running OFDMA with MBSSIDs. Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: update beacon size limitationMeiChia Chiu
To accommodate 11v MBSSID IE and support maximum 16 MBSSIDs, expand the beacon size limitation for beacon and inband discovery commands. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Money Wang <money.wang@mediatek.com> Signed-off-by: Money Wang <money.wang@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add MBSSID support for mt7996Chank Chen
Add bss_info_uni_mbssid tag and implement 802.11v MBSSID support for mt7996 chipsets. Signed-off-by: Chank Chen <chank.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix clang-specific fortify warningsDmitry Antipov
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've noticed the following (somewhat confusing due to absence of an actual source code location): In file included from drivers/net/wireless/mediatek/mt76/mt792x_core.c:4: In file included from ./include/linux/module.h:13: In file included from ./include/linux/stat.h:19: In file included from ./include/linux/time.h:60: In file included from ./include/linux/time32.h:13: In file included from ./include/linux/timex.h:67: In file included from ./arch/x86/include/asm/timex.h:5: In file included from ./arch/x86/include/asm/processor.h:23: In file included from ./arch/x86/include/asm/msr.h:11: In file included from ./arch/x86/include/asm/cpumask.h:5: In file included from ./include/linux/cpumask.h:12: In file included from ./include/linux/bitmap.h:11: In file included from ./include/linux/string.h:254: ./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] __read_overflow2_field(q_size_field, size); In file included from drivers/net/wireless/mediatek/mt76/mt7915/main.c:4: In file included from ./include/linux/etherdevice.h:20: In file included from ./include/linux/if_ether.h:19: In file included from ./include/linux/skbuff.h:15: In file included from ./include/linux/time.h:60: In file included from ./include/linux/time32.h:13: In file included from ./include/linux/timex.h:67: In file included from ./arch/x86/include/asm/timex.h:5: In file included from ./arch/x86/include/asm/processor.h:23: In file included from ./arch/x86/include/asm/msr.h:11: In file included from ./arch/x86/include/asm/cpumask.h:5: In file included from ./include/linux/cpumask.h:12: In file included from ./include/linux/bitmap.h:11: In file included from ./include/linux/string.h:254: ./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] __read_overflow2_field(q_size_field, size); In file included from drivers/net/wireless/mediatek/mt76/mt7996/main.c:6: In file included from drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h:9: In file included from ./include/linux/interrupt.h:8: In file included from ./include/linux/cpumask.h:12: In file included from ./include/linux/bitmap.h:11: In file included from ./include/linux/string.h:254: ./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] __read_overflow2_field(q_size_field, size); The compiler actually complains on 'mt7915_get_et_strings()', 'mt792x_get_et_strings()' and 'mt7996_get_et_strings()' due to the same reason: fortification logic inteprets call to 'memcpy()' as an attempt to copy the whole array from its first member and so issues an overread warning. These warnings may be silenced by passing an address of the whole array and not the first member to 'memcpy()'. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921e: Support MT7992 IP in Xiaomi Redmibook 15 Pro (2023)Ingo Rohloff
In the Xiaomi Redmibook 15 Pro (2023) laptop I have got, a wifi chip is used, which according to its PCI Vendor ID is from "ITTIM Technology". This chip works flawlessly with the mt7921e module. The driver doesn't bind to this PCI device, because the Vendor ID from "ITTIM Technology" is not recognized. This patch adds the PCI Vendor ID from "ITTIM Technology" to the list of PCI Vendor IDs and lets the mt7921e driver bind to the mentioned wifi chip. Signed-off-by: Ingo Rohloff <lundril@gmx.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: Use PTR_ERR_OR_ZERO() to simplify codeJinjie Ruan
Return PTR_ERR_OR_ZERO() instead of return 0 or PTR_ERR() to simplify code. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: support per-band LED controlJen-Hao Cheng
Extend settings of LED registers to support per-band configuration. Signed-off-by: Jen-Hao Cheng <jen-hao.cheng@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: support more options for mt7996_set_bitrate_mask()Howard Hsu
Add support to configure parameters at runtime, such as mcs, gi, and he_ltf. Note that EHT mode does not support this feature yet. Co-developed-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: only set vif teardown cmds at remove interfaceShayne Chen
Only send commands that disable vif when removing interface, this reduces some unnecessary bss_info and sta_rec commands, especially for station interface. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix TWT command formatPeter Chiu
Align the command format of UNI_CMD_TWT_ARGT_UPDATE to firmware. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix rx rate report for CBW320-2Peter Chiu
RX vector reports channel bandwidth 320-1 and 320-2 with different values. Fix it to correctly report rx rate when using CBW320-2. Fixes: 80f5a31d2856 ("wifi: mt76: mt7996: add support for EHT rate report") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix wmm queue mappingPeter Chiu
Firmware uses access class index (ACI) for wmm parameters update, so convert mac80211 queue to ACI in mt7996_conf_tx(). Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix beamformee ss subfield in EHT PHY capHoward Hsu
According to P802.11be_D3.2 Table 9-404m, the minimum value of Beamformee SS field shall be 3. Fix the values to follow the spec. Fixes: 348533eb968d ("wifi: mt76: mt7996: add EHT capability init") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix beamform mcu cmd configurationHoward Hsu
The bf_num field represents how many bands can support beamform, so set the value to 3, and bf_bitmap represents the bitmap of bf_num. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: set correct wcid in txpPeter Chiu
Set correct wcid in txp to let the SDO hw module look into the correct wtbl, otherwise the tx descriptor may be wrongly fiiled. This patch also fixed the issue that driver could not correctly report sta statistics, especially in WDS mode, which misled AQL. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Co-developed-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add more unified event IDsDeren Wu
Add more unified event IDs which will be used in new chipset. This is the preliminary patch for mt7925 support. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add more unified command IDsDeren Wu
Add more unified command IDs which will be used in new chipset. This is the preliminary patch for mt7925 support. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add data field in struct tlvDeren Wu
Add tlv->data element for tlv parsing easier. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add eht support for tx powerDeren Wu
Add eht field in struct mt76_power_limits for 802.11be power config. The function stack size would be too big by eht adding in structure, we also refactor mt76_connac_mcu_rate_txpower_band() to take dynamic allocated memory instead. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add eht support for phy mode configDeren Wu
Add eht configuration support in existing function mt76_connac_get_phy_mode_v2() and export it for mt7925. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: export functions for mt7925Deren Wu
mt7925 rely on the similar functionalities in connac layer. Export them for mt7925 reuse. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt792x: support mt7925 chip initDeren Wu
add firmware download and dma init support for mt7925. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: introduce helper for mt7925 chipsetDeren Wu
Introduce is_mt7925() helper for new chipset. mt7925 runs the same firmware download and mmio map flow as mt7921. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7915: fix monitor mode issuesFelix Fietkau
Enable receiving other-unicast packets Disable RX header translation in order to proprerly receive data packets. Fixes warnings and missed packets when rx decap offload is enabled Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: add DMA mapping error check in mt76_alloc_txwi()Dmitry Antipov
Add 'dma_mapping_error()' check in 'mt76_alloc_txwi()'. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: remove unused error path in mt76_connac_tx_complete_skbFelix Fietkau
The error handling code was added in order to allow tx enqueue to fail after calling .tx_prepare_skb. Since this can no longer happen, the error handling code is unused. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix race condition related to checking tx queue fill statusFelix Fietkau
When drv_tx calls race against local tx scheduling, the queue fill status checks can potentially race, leading to dma queue entries being overwritten. Fix this by deferring packets from drv_tx calls to the tx worker, in order to ensure that all regular queue tx comes from the same context. Reported-by: Ryder Lee <Ryder.Lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 03:07:03 +0000