summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-20net/mlx5: E-Switch, Fix drop counters use before creationEugenia Emantayev
First use of drop counters happens in esw_apply_vport_conf function, while they are allocated later in the flow. Fix that by moving esw_vport_create_drop_counters function to be called before the first use. Fixes: b8a0dbe3a90b ("net/mlx5e: E-switch, Add steering drop counters") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5: Add header re-write to the checks for conflicting actionsOr Gerlitz
We can't allow only some of the rules sharing an FTE to ask for header re-write, add it to the conflicting action checks. Fixes: 0d235c3fabb7 ('net/mlx5: Add hash table to search FTEs in a flow-group') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5: Use 128B cacheline size for 128B or larger cachelinesDaniel Jurgens
The adapter uses the cache_line_128byte setting to set the bounds for end padding. On systems where the cacheline size is greater than 128B use 128B instead of the default of 64B. This results in fewer partial cacheline writes. There's a 50% chance it will pad to the end of a 256B cache line vs only 25% when using 64B. Fixes: f32f5bd2eb7e ("net/mlx5: Configure cache line size for start and end padding") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Specify numa node when allocating drop rqGal Pressman
When allocating a drop rq, no numa node is explicitly set which means allocations are done on node zero. This is not necessarily the nearest numa node to the HCA, and even worse, might even be a memoryless numa node. Choose the numa_node given to us by the pci device in order to properly allocate the coherent dma memory instead of assuming zero is valid. Fixes: 556dd1b9c313 ("net/mlx5e: Set drop RQ's necessary parameters only") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Return error if prio is specified when offloading eswitch vlan pushOr Gerlitz
This isn't supported when we emulate eswitch vlan push action which is the current state of things. Fixes: 8b32580df1cb ('net/mlx5e: Add TC vlan action for SRIOV offloads') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5: Address static checker warnings on non-constant initializersOr Gerlitz
Address these sparse warnings on drivers/net/ethernet/mellanox/mlx5 [..]/core/diag/fs_tracepoint.c:99:53: warning: non-constant initializer for static object [..]/core/diag/fs_tracepoint.c:102:53: warning: non-constant initializer for static object etc Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Eliminate build warnings on no previous prototypeOr Gerlitz
Fix these gcc warnings on drivers/net/ethernet/mellanox/mlx5: [..]/core/lib/clock.c:454:6: warning: no previous prototype for 'mlx5_init_clock' [-Wmissing-prototypes] [..]/core/lib/clock.c:510:6: warning: no previous prototype for 'mlx5_cleanup_clock' [-Wmissing-prototypes] [..]/core/en_main.c:3141:5: warning: no previous prototype for 'mlx5e_setup_tc' [-Wmissing-prototypes] Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Verify inline header size do not exceed SKB linear sizeEran Ben Elisha
Driver tries to copy at least MLX5E_MIN_INLINE bytes into the control segment of the WQE. It assumes that the linear part contains at least MLX5E_MIN_INLINE bytes, which can be wrong. Cited commit verified that driver will not copy more bytes into the inline header part that the actual size of the packet. Re-factor this check to make sure we do not exceed the linear part as well. This fix is aligned with the current driver's assumption that the entire L2 will be present in the linear part of the SKB. Fixes: 6aace17e64f4 ("net/mlx5e: Fix inline header size for small packets") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Fix loopback self test when GRO is offInbar Karmy
When GRO is off, the transport header pointer in sk_buff is initialized to network's header. To find the udp header, instead of using udp_hdr() which assumes skb_network_header was set, manually calculate the udp header offset. Fixes: 0952da791c97 ("net/mlx5e: Add support for loopback selftest") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Fix TCP checksum in LRO buffersGal Pressman
When receiving an LRO packet, the checksum field is set by the hardware to the checksum of the first coalesced packet. Obviously, this checksum is not valid for the merged LRO packet and should be fixed. We can use the CQE checksum which covers the checksum of the entire merged packet TCP payload to help us calculate the checksum incrementally. Tested by sending IPv4/6 traffic with LRO enabled, RX checksum disabled and watching nstat checksum error counters (in addition to the obvious bandwidth drop caused by checksum errors). This bug is usually "hidden" since LRO packets would go through the CHECKSUM_UNNECESSARY flow which does not validate the packet checksum. It's important to note that previous to this patch, LRO packets provided with CHECKSUM_UNNECESSARY are indeed packets with a correct validated checksum (even though the checksum inside the TCP header is incorrect), since the hardware LRO aggregation is terminated upon receiving a packet with bad checksum. Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20tools/libbpf: Avoid possibly using uninitialized variableJeremy Cline
Fixes a GCC maybe-uninitialized warning introduced by 48cca7e44f9f. "text" is only initialized inside the if statement so only print debug info there. Fixes: 48cca7e44f9f ("libbpf: add support for bpf_call") Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-20ibmvnic: Check for NULL skb's in NAPI poll routineThomas Falcon
After introduction of commit d0869c0071e4, there were some instances of RX queue entries from a previous session (before the device was closed and reopened) returned to the NAPI polling routine. Since the corresponding socket buffers were freed, this resulted in a panic on reopen. Include a check for a NULL skb here to avoid this. Fixes: d0869c0071e4 ("ibmvnic: Clean RX pool buffers during device close") Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20Merge branch 'stmmac-multi-queue-fixes-and-cleanups'David S. Miller
Niklas Cassel says: ==================== stmmac multi-queue fixes and cleanups ==================== Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20net: stmmac: honor error code from stmmac_dt_phy()Niklas Cassel
Honor error code from stmmac_dt_phy() instead of always returning -ENODEV. No functional change intended. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20net: stmmac: add error handling in stmmac_mtl_setup()Niklas Cassel
The device tree binding for stmmac says: - Multiple TX Queues parameters: below the list of all the parameters to configure the multiple TX queues: - snps,tx-queues-to-use: number of TX queues to be used in the driver [...] - For each TX queue [...] However, if one specifies snps,tx-queues-to-use = 2, but omits the queue subnodes, or defines just one queue subnode, since the driver appears to initialize queues with sane default values, we will get tx queue timeouts. This is because the initialization code only initializes as many queues as it finds subnodes. Potentially leaving some queues uninitialized. To avoid hard to debug issues, return an error if the number of subnodes differ from snps,tx-queues-to-use/snps,rx-queues-to-use. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20net: stmmac: call correct function in stmmac_mac_config_rx_queues_routing()Niklas Cassel
stmmac_mac_config_rx_queues_routing() incorrectly calls rx_queue_prio() instead of rx_queue_routing(). This looks like a copy paste issue, since stmmac_mac_config_rx_queues_prio() already calls rx_queue_prio(), and both stmmac_mac_config_rx_queues_routing() and stmmac_mac_config_rx_queues_prio() are very similar in structure. Fixes: abe80fdc6ee6 ("net: stmmac: RX queue routing configuration") Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20net: stmmac: rename dwmac4_tx_queue_routing() to match realityNiklas Cassel
Looking at dwmac4_tx_queue_routing(), it is obvious that it sets up rx queue routing. Rename dwmac4_tx_queue_routing() to dwmac4_rx_queue_routing() to better match reality. Fixes: abe80fdc6ee6 ("net: stmmac: RX queue routing configuration") Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20net: stmmac: WARN if tx_skbuff entries are reused before clearedNiklas Cassel
The current code assumes that a tx_skbuff entry has been cleared by stmmac_tx_clean() before stmmac_xmit()/stmmac_tso_xmit() assigns a new skb to that entry. However, since we never check the current value before overwriting it, it is theoretically possible that a non-NULL value is overwritten. Add WARN_ONs to verify that each entry in tx_skbuff is NULL before it is assigned a new value. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20net: stmmac: do not clear tx_skbuff entries in stmmac_xmit()/stmmac_tso_xmit()Niklas Cassel
tx_skbuff is initialized to NULL in init_dma_tx_desc_rings(), which is called from ndo_open(). stmmac_tx_clean() frees any non-NULL skb, and sets the tx_skbuff entry to NULL. Hence, there is no need to set skbuff entries to NULL in stmmac_xmit()/stmmac_tso_xmit(), and doing so falsely gives the reader the impression that it is needed. Do not clear tx_skbuff entries in stmmac_xmit()/stmmac_tso_xmit(). Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20net: stmmac: set MSS for each tx DMA channelNiklas Cassel
The DMA engine in dwmac4 can segment a large TSO packet to several smaller packets of (max) size Maximum Segment Size (MSS). The DMA engine fetches and saves the MSS via a context descriptor. This context decriptor has to be provided to each tx DMA channel. To ensure that this is done, move struct member mss from stmmac_priv to stmmac_tx_queue. stmmac_reset_queues_param() now also resets mss, together with other queue parameters, so reset of mss value can be removed from stmmac_resume(). init_dma_tx_desc_rings() now also resets mss, together with other queue parameters, so reset of mss value can be removed from stmmac_open(). This fixes tx queue timeouts for dwmac4, with DT property snps,tx-queues-to-use > 1, when running iperf3 with multiple threads. Fixes: ce736788e8a9 ("net: stmmac: adding multiple buffers for TX") Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20Rename sbi_save to parse_dtb to improve code readabilityMichael Clark
The sbi_ prefix would seem to indicate an SBI interface, and save is not very specific. After applying this patch, reading head.S makes more sense. Signed-off-by: Michael Clark <michaeljclark@mac.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-02-20RISC-V: Enable IRQ during exception handlingzongbox@gmail.com
Interrupt is allowed during exception handling. There are warning messages if the kernel enables the configuration 'CONFIG_DEBUG_ATOMIC_SLEEP=y'. BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:23 in_atomic(): 0, irqs_disabled(): 1, pid: 43, name: ash CPU: 0 PID: 43 Comm: ash Tainted: G W 4.15.0-rc8-00089-g89ffdae-dirty #17 Call Trace: [<000000009abb1587>] walk_stackframe+0x0/0x7a [<00000000d4f3d088>] ___might_sleep+0x102/0x11a [<00000000b1fd792a>] down_read+0x18/0x28 [<000000000289ec01>] do_page_fault+0x86/0x2f6 [<00000000012441f6>] _do_fork+0x1b4/0x1e0 [<00000000f46c3e3b>] ret_from_syscall+0xa/0xe Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-02-20x25: use %*ph to print small bufferAntonio Cardace
Use %*ph format to print small buffer as hex string. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Antonio Cardace <anto.cardace@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20RISC-V: kconfig cleanupsPalmer Dabbelt
These three kconfig cleanups were found by ulfalyzer. They're all things we were selecting that were undefined, either because they'd been remove upstream or are part of a future RISC-V submission. * ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE is obselete. * RISCV_IRQ_INTC is the old name for our interrupt controller driver, it'll be changed for the final submission and doesn't exist now. * ARCH_WANT_OPTIONAL_GPIOLIB is obselete.
2018-02-20riscv: Remove ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE selectUlf Magnusson
The ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE symbol was removed in commit 51a021244b9d ("atomic64: no need for CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE"). Remove the ARCH_HAS_ATOMIC64_DEC_IS_POSITIVE select from RISCV. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-02-20riscv: kconfig: Remove RISCV_IRQ_INTC selectUlf Magnusson
The RISCV_IRQ_INTC configuration symbol is undefined, but RISCV selects it. Quoting Palmer Dabbelt: It looks like this slipped through, the symbol has been renamed RISCV_INTC. No RISCV_INTC configuration symbol has been merged either. Just remove the RISCV_IRQ_INTC select for now. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-02-20riscv: Remove ARCH_WANT_OPTIONAL_GPIOLIB selectUlf Magnusson
The ARCH_WANT_OPTIONAL_GPIOLIB symbol was removed in commit 65053e1a7743 ("gpio: delete ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB"). GPIOLIB should just be selected explicitly if needed. Remove the ARCH_WANT_OPTIONAL_GPIOLIB select from RISCV. See commit 0145071b3314 ("x86: Do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB") and commit da9a1c6767 ("arm64: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB") as well. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2018-02-20Merge branch 'net-Expose-KVD-linear-parts-as-resources'David S. Miller
Jiri Pirko says: ==================== net: Expose KVD linear parts as resources Arkadi says: Expose the KVD linear partitions via the devlink resource interface. This will give the user the ability to control the linear memory division. --- v1->v2: - patch1: - fixed u64 division error reported by kbuildbot ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20mlxsw: spectrum_kvdl: Add support for per part occupancyArkadi Sharshevsky
Add support for calculating occupancy for separate kvdl parts. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20mlxsw: spectrum_kvdl: Add support for dynamic partition setArkadi Sharshevsky
Add support for dynamic partition set via the resource interface. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20mlxsw: spectrum_kvdl: Add support for linear division resourcesArkadi Sharshevsky
The linear part of the KVD memory is sub-divided into multiple parts. This patch exposes this internal partitions via the resource interface. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20devlink: Perform cleanup of resource_set cbArkadi Sharshevsky
After adding size validation logic into core cleanup is required. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20devlink: Move size validation to coreArkadi Sharshevsky
Currently the size validation is done via a cb, which is unneeded. The size validation can be moved to core. The next patch will perform cleanup. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20Merge branch 'net-Get-rid-of-net_mutex-and-simplify-cleanup_list-queueing'David S. Miller
Kirill Tkhai says: ==================== net: Get rid of net_mutex and simplify cleanup_list queueing [1/3] kills net_mutex and makes net_sem be taken for write instead. This is made to take less locks (1 instead of 2) for the time before all pernet_operations are converted. [2-3/3] simplifies dead net cleanup queueing, and makes llist api be used for that. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20net: Queue net_cleanup_work only if there is first net addedKirill Tkhai
When llist_add() returns false, cleanup_net() hasn't made its llist_del_all(), while the work has already been scheduled by the first queuer. So, we may skip queue_work() in this case. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20net: Make cleanup_list and net::cleanup_list of llist typeKirill Tkhai
This simplifies cleanup queueing and makes cleanup lists to use llist primitives. Since llist has its own cmpxchg() ordering, cleanup_list_lock is not more need. Also, struct llist_node is smaller, than struct list_head, so we save some bytes in struct net with this patch. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20net: Kill net_mutexKirill Tkhai
We take net_mutex, when there are !async pernet_operations registered, and read locking of net_sem is not enough. But we may get rid of taking the mutex, and just change the logic to write lock net_sem in such cases. This obviously reduces the number of lock operations, we do. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20ibmvnic: Keep track of supplementary TX descriptorsThomas Falcon
Supplementary TX descriptors were not being accounted for, which was resulting in an overflow of the hardware device's transmit queue. Keep track of those descriptors now when determining how many entries remain on the TX queue. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20Merge tag 'leds_for-4.16-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED maintainer update: "LED update to MAINTAINERS, to admit the reality. Message from Richard: "I've been looking at some of the emails but not needed to be involved for a while now, you're doing fine without me!" [0] Many thanks to Richard for his work as a founder of the LED subsystem!" [0] https://lkml.org/lkml/2018/2/18/145 * tag 'leds_for-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: MAINTAINERS: Remove Richard Purdie from LED maintainers
2018-02-20RDMA/bnxt_re: Avoid system hang during device un-regSelvin Xavier
BNXT_RE_FLAG_TASK_IN_PROG doesn't handle multiple work requests posted together. Track schedule of multiple workqueue items by maintaining a per device counter and proceed with IB dereg only if this counter is zero. flush_workqueue is no longer required from NETDEV_UNREGISTER path. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-20RDMA/bnxt_re: Fix system crash during load/unloadSelvin Xavier
During driver unload, the driver proceeds with cleanup without waiting for the scheduled events. So the device pointers get freed up and driver crashes when the events are scheduled later. Flush the bnxt_re_task work queue before starting device removal. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-20RDMA/bnxt_re: Synchronize destroy_qp with poll_cqSelvin Xavier
Avoid system crash when destroy_qp is invoked while the driver is processing the poll_cq. Synchronize these functions using the cq_lock. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-20RDMA/bnxt_re: Unpin SQ and RQ memory if QP create failsDevesh Sharma
Driver leaves the QP memory pinned if QP create command fails from the FW. Avoids this scenario by adding a proper exit path if the FW command fails. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-20RDMA/bnxt_re: Disable atomic capability on bnxt_re adaptersDevesh Sharma
More testing needs to be done before enabling this feature. Disabling the feature temporarily Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-20MIPS: Drop spurious __unused in struct compat_flockJames Hogan
MIPS' struct compat_flock doesn't match the 32-bit struct flock, as it has an extra short __unused before pad[4], which combined with alignment increases the size to 40 bytes compared with struct flock's 36 bytes. Since commit 8c6657cb50cb ("Switch flock copyin/copyout primitives to copy_{from,to}_user()"), put_compat_flock() writes the full compat_flock struct to userland, which results in corruption of the userland word after the struct flock when running 32-bit userlands on 64-bit kernels. This was observed to cause a bus error exception when starting Firefox on Debian 8 (Jessie). Reported-by: Peter Mamonov <pmamonov@gmail.com> Signed-off-by: James Hogan <jhogan@kernel.org> Tested-by: Peter Mamonov <pmamonov@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.13+ Patchwork: https://patchwork.linux-mips.org/patch/18646/
2018-02-20Revert "usb: musb: host: don't start next rx urb if current one failed"Bin Liu
This reverts commit dbac5d07d13e330e6706813c9fde477140fb5d80. commit dbac5d07d13e ("usb: musb: host: don't start next rx urb if current one failed") along with commit b5801212229f ("usb: musb: host: clear rxcsr error bit if set") try to solve the issue described in [1], but the latter alone is sufficient, and the former causes the issue as in [2], so now revert it. [1] https://marc.info/?l=linux-usb&m=146173995117456&w=2 [2] https://marc.info/?l=linux-usb&m=151689238420622&w=2 Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-20usb: musb: fix enumeration after resumeAndreas Kemnade
On dm3730 there are enumeration problems after resume. Investigation led to the cause that the MUSB_POWER_SOFTCONN bit is not set. If it was set before suspend (because it was enabled via musb_pullup()), it is set in musb_restore_context() so the pullup is enabled. But then musb_start() is called which overwrites MUSB_POWER and therefore disables MUSB_POWER_SOFTCONN, so no pullup is enabled and the device is not enumerated. So let's do a subset of what musb_start() does in the same way as musb_suspend() does it. Platform-specific stuff it still called as there might be some phy-related stuff which needs to be enabled. Also interrupts are enabled, as it was the original idea of calling musb_start() in musb_resume() according to Commit 6fc6f4b87cb3 ("usb: musb: Disable interrupts on suspend, enable them on resume") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-20arm64: perf: correct PMUVer probingMark Rutland
The ID_AA64DFR0_EL1.PMUVer field doesn't follow the usual ID registers scheme. While value 0xf indicates a non-architected PMU is implemented, values 0x1 to 0xe indicate an increasingly featureful architected PMU, as if the field were unsigned. For more details, see ARM DDI 0487C.a, D10.1.4, "Alternative ID scheme used for the Performance Monitors Extension version". Currently, we treat the field as signed, and erroneously bail out for values 0x8 to 0xe. Let's correct that. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-20arm_pmu: acpi: request IRQs up-frontMark Rutland
We can't request IRQs in atomic context, so for ACPI systems we'll have to request them up-front, and later associate them with CPUs. This patch reorganises the arm_pmu code to do so. As we no longer have the arm_pmu structure at probe time, a number of prototypes need to be adjusted, requiring changes to the common arm_pmu code and arm_pmu platform code. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-20arm_pmu: note IRQs and PMUs per-cpuMark Rutland
To support ACPI systems, we need to request IRQs before we know the associated PMU, and thus we need some percpu variable that the IRQ handler can find the PMU from. As we're going to request IRQs without the PMU, we can't rely on the arm_pmu::active_irqs mask, and similarly need to track requested IRQs with a percpu variable. Signed-off-by: Mark Rutland <mark.rutland@arm.com> [will: made armpmu_count_irq_users static] Signed-off-by: Will Deacon <will.deacon@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 20:47:03 +0000