summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-23net: dsa: Remove documentation for port_fdb_prepareHauke Mehrtens
This callback was removed some time ago, also remove the documentation. Fixes: 1b6dd556c304 ("net: dsa: Remove prepare phase for FDB") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Revert "bridge: do not add port to router list when receives query with ↵Hangbin Liu
source 0.0.0.0" This reverts commit 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Reported-by: Sebastian Gottschall <s.gottschall@newmedia-net.de> Fixes: 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23selftests: fib_tests: sleep after changing carrier. again.Thadeu Lima de Souza Cascardo
Just like commit e2ba732a1681 ("selftests: fib_tests: sleep after changing carrier"), wait one second to allow linkwatch to propagate the carrier change to the stack. There are two sets of carrier tests. The first slept after the carrier was set to off, and when the second set ran, it was likely that the linkwatch would be able to run again without much delay, reducing the likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a loop, you will quickly notice the failures. Sleeping on the second set of tests make the failures go away. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Merge branch 'net-phy-aquantia-improve-and-extend-driver'David S. Miller
Heiner Kallweit says: ==================== net: phy: aquantia: improve and extend driver This series improves and extends the Aquantia PHY driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: aquantia: use genphy_c45_read_statusHeiner Kallweit
Use new function genphy_c45_read_status(). 1000BaseT link partner advertisement needs to be read from vendor registers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: add genphy_c45_read_statusHeiner Kallweit
Similar to genphy_read_status() for Clause 22 add a generic read_status function for Clause 45. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: don't change modes we don't care about in genphy_c45_read_lpaHeiner Kallweit
Because 1000BaseT isn't covered by Clause 45, the 1000BaseT flags in phydev->lp_advertising may have been set based on vendor registers already. genphy_c45_read_lpa() would clear these flags as of today. Therefore switch to mii_lpa_mod_linkmode_lpa_t. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: aquantia: add support for auto-negotiation configurationAndrew Lunn
Make use of the generic c45 code, plus code specific to the Aquantia phy for 1000BaseT negotiation. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: aquantia: remove false 5G and 10G speed ability for AQCS109Heiner Kallweit
AQCS109 belongs to a family of PHY's where certain members don't support 5G or 10G. However for all members of the family the chip reports 10G and 5G capability. Therefore remove the not supported modes for AQCS109. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Merge tag 'mlx5-updates-2019-02-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-02-21 This series adds some misc updates to mlx5 driver, 1) Eli Britstein, Introduces tunnel entropy control from PCMR register and fixes GRE key by controlling port tunnel entropy calculation. 2) Eran Ben Elisha, provides some mlx5 fixes to the latest tx devlink health reporting mechanism. 3) Huy Nguyen, Added the support for ndo bridge_setlink to allow VEPA/VEB E-Switch legacy mode configurations. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Merge branch 'mlxsw-Add-support-for-new-port-types-and-speeds-for-Spectrum-2'David S. Miller
Ido Schimmel says: ==================== mlxsw: Add support for new port types and speeds for Spectrum-2 Shalom says: This patchset adds support for new port types and speeds for Spectrum-2. Patch #1 + #2 removes an unsupported PTYS field and a duplicate link mode entry. Patch #3 queries port's connector type from firmware instead of deriving it from port admin state. Patch #4 renames functions which relate to port type-speed to be Spectrum-1 specific. Patch #5 defines port type-speed operations and applies it for Spectrum-1. Patch #6 + #7 are small renaming and cosmetic changes. Patch #8 adds new port type-speed fields for PTYS register. These new fields extend the existing ones in order to support more types and speeds. Patch #9 adds Spectrum-2 support for port type-speed operations. Patch #10 adds Spectrum-2 new port types and speeds. For Spectrum-2, the user must configure all the types per speed if he / she wants a specific speed to be advertised. For example, if the user wants to advertise 100Gbps 4-lanes speed, the following ethtool bits should be advertised: Supported ethtool bits for 100Gbps 4-lanes: 0x1000000000 100000baseKR4 Full 0x2000000000 100000baseSR4 Full 0x4000000000 100000baseCR4 Full 0x8000000000 100000baseLR4_ER4 Full Command for advertising 100Gbps 4-lanes: ethtool -s enp3s0np1 advertise 0xF000000000 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Add Spectrum-2 ASIC support for new port types and speedsShalom Toledo
Add Spectrum-2 ASIC support for the following new port types and speeds: * 50Gbps 1-lane * 100Gbps 2-lanes * 200Gbps 4-lanes Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Add Spectrum-2 ASIC port type-speed operationsShalom Toledo
Add Spectrum-2 ASIC port type-speed operations. Since multiple ethtool link modes are represented using a single bit in the ASIC, the driver forces the user to configure all types per a specific speed. For example, if the user wants to advertise 100Gbps 4-lanes speed, he should advertise all the types of 100Gbps 4-lanes speed that are supported by the ASIC as shown below: Supported ethtool bits for 100Gbps 4-lanes: 0x1000000000 100000baseKR4 Full 0x2000000000 100000baseSR4 Full 0x4000000000 100000baseCR4 Full 0x8000000000 100000baseLR4_ER4 Full Command for advertising 100Gbps 4-lanes: ethtool -s enp3s0np1 advertise 0xF000000000 Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: reg: Add new port type-speed fields for PTYS registerShalom Toledo
PTYS register introduces a new layout for port type-speed fields. These fields extend the existing ones in order to handle more types and speeds. For example, the new 200Gbps speed. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: reg: 80 columns wrapping changeShalom Toledo
80 columns wrapping change in mlxsw_reg_ptys_eth_unpack function. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: reg: Rename p_eth_proto_adm to full name p_eth_proto_adminShalom Toledo
Rename p_eth_proto_adm to p_eth_proto_admin in mlxsw_reg_ptys_eth_unpack function. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Add port type-speed operationsShalom Toledo
Add port type-speed operations in order to have different operations for different ASICs. For now, both ASICs use the same pointer. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Rename port type-speed functions to ASIC specificShalom Toledo
Rename port speed-type functions to be Spectrum-1 ASIC specific. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Query port connector type from firmwareShalom Toledo
Instead of deriving the port connector type from port admin state, query it from firmware. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Remove unsupported eth_proto_lp_advertise field in PTYSShalom Toledo
Remove eth_proto_lp_advertise field in PTYS register since it is not supported by the firmware. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Remove duplicate port link mode entryShalom Toledo
Remove duplicate port link mode entry from mlxsw_sp_port_link_mode. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: set static variable an initial value in atl2_probe()Mao Wenan
cards_found is a static variable, but when it enters atl2_probe(), cards_found is set to zero, the value is not consistent with last probe, so next behavior is not our expect. Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23kcm: Remove unnecessary SLAB_PANIC for kmem_cache_create() in kcm_initYueHaibing
There has check NULL on kmem_cache_create on failure in kcm_init, no need use SLAB_PANIC to panic the system. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Merge branch 'net-Wformat-fixes'David S. Miller
Florian Fainelli says: ==================== -Wformat fixes This is a collection of some -Wformat fixes found during build, nothing critical, but nice to have for people turning on more warnings with their builds. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23veth: Fix -Wformat-truncationFlorian Fainelli
Provide a precision hint to snprintf() in order to eliminate a -Wformat-truncation warning provided below. A maximum of 11 characters is allowed to reach a maximum of 32 - 1 characters given a possible maximum value of queues using up to UINT_MAX which occupies 10 characters. Incidentally 11 is the number of characters for "xdp_packets" which is the largest string we append. drivers/net/veth.c: In function 'veth_get_strings': drivers/net/veth.c:118:47: warning: '%s' directive output may be truncated writing up to 31 bytes into a region of size between 12 and 21 [-Wformat-truncation=] snprintf(p, ETH_GSTRING_LEN, "rx_queue_%u_%s", ^~ drivers/net/veth.c:118:5: note: 'snprintf' output between 12 and 52 bytes into a destination of size 32 snprintf(p, ETH_GSTRING_LEN, "rx_queue_%u_%s", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ i, veth_rq_stats_desc[j].desc); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23e1000e: Fix -Wformat-truncation warningsFlorian Fainelli
Provide precision hints to snprintf() since we know the destination buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the following warnings: drivers/net/ethernet/intel/e1000e/netdev.c: In function 'e1000_request_msix': drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-rx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->rx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->rx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-rx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-tx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->tx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->tx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-tx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: dsa: mv88e6xxx: Fix -Wformat-security warningsFlorian Fainelli
We are not specifying an explicit format argument but instead passing a string litteral which causes these two warnings to show up: drivers/net/dsa/mv88e6xxx/chip.c: In function 'mv88e6xxx_irq_poll_setup': drivers/net/dsa/mv88e6xxx/chip.c:483:2: warning: format not a string literal and no format arguments [-Wformat-security] chip->kworker = kthread_create_worker(0, dev_name(chip->dev)); ^~~~ drivers/net/dsa/mv88e6xxx/ptp.c: In function 'mv88e6xxx_ptp_setup': drivers/net/dsa/mv88e6xxx/ptp.c:403:4: warning: format not a string literal and no format arguments [-Wformat-security] dev_name(chip->dev)); ^~~~~~~~ LD [M] drivers/net/dsa/mv88e6xxx/mv88e6xxx.o Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Avoid -Wformat-truncation warningsFlorian Fainelli
Give precision identifiers to the two snprintf() formatting the priority and TC strings to avoid producing these two warnings: drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_prio_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:37: warning: '%d' directive output may be truncated writing between 1 and 3 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:3: note: 'snprintf' output between 3 and 36 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_prio_stats[i].str, prio); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_tc_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:37: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:3: note: 'snprintf' output between 3 and 44 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_tc_stats[i].str, tc); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23bpfilter: re-add header search paths to tools include to fix build errorMasahiro Yamada
I thought header search paths to tools/include(/uapi) were unneeded, but it looks like a build error occurs depending on the compiler. Commit 303a339f30a9 ("bpfilter: remove extra header search paths for bpfilter_umh") reintroduced the build error fixed by commit ae40832e53c3 ("bpfilter: fix a build err"). Apology for the breakage, and thanks to Guenter for reporting this. Fixes: 303a339f30a9 ("bpfilter: remove extra header search paths for bpfilter_umh") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10GMaxime Chevallier
Some Marvell Alaska PHYs support 2.5G, 5G and 10G BaseT links. Their default behaviour is to advertise all of these modes, but at the moment, only 10GBaseT is supported. To prevent link partners from establishing link at that speed, clear these modes upon configuring aneg parameters. Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23Merge tag 'powerpc-5.0-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix for an oops when using SRIOV, introduced by the recent changes to support compound IOMMU groups. Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.0-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv/sriov: Register IOMMU groups for VFs
2019-02-23Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four small fixes: three in drivers and one in the core. The core fix is also minor in scope since the bug it fixes is only known to affect systems using SCSI reservations. Of the driver bugs, the libsas one is the most major because it can lead to multiple disks on the same expander not being exposed" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: reset host byte in DID_NEXUS_FAILURE case scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
2019-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-02-23 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a bug in BPF's LPM deletion logic to match correct prefix length, from Alban. 2) Fix AF_XDP teardown by not destroying umem prematurely as it is still needed till all outstanding skbs are freed, from Björn. 3) Fix unkillable BPF_PROG_TEST_RUN under preempt kernel by checking signal_pending() outside need_resched() condition which is never triggered there, from Stanislav. 4) Fix two nfp JIT bugs, one in code emission for K-based xor, and another one to explicitly clear upper bits in alu32, from Jiong. 5) Add bpf list address to maintainers file, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge branch 'fixes-v5.0-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull keys fixes from James Morris: "Two fixes from Eric Biggers" * 'fixes-v5.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: always initialize keyring_index_key::desc_len KEYS: user: Align the payload buffer
2019-02-22Merge tag 'pm-5.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a regression in the PM-runtime framework introduced by the recent switch-over of it to using hrtimers and a use-after-free introduced by one of the recent changes in the scmi-cpufreq driver. Specifics: - Use hrtimer_try_to_cancel() instead of hrtimer_cancel() in the PM-runtime framework to avoid a possible timer-related deadlock introduced recently (Vincent Guittot). - Reorder the scmi-cpufreq driver code to avoid accessing memory that has just been freed (Yangtao Li)" * tag 'pm-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM-runtime: Fix deadlock when canceling hrtimer cpufreq: scmi: Fix use-after-free in scmi_cpufreq_exit()
2019-02-22Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Only a handful of device tree fixes, all simple enough: NVIDIA Tegra: - Fix a regression for booting on chromebooks TI OMAP: - Two fixes PHY mode on am335x reference boards Marvell mvebu: - A regression fix for Armada XP NAND flash controllers - An incorrect reset signal on the clearfog board" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: tegra: Restore DT ABI on Tegra124 Chromebooks ARM: dts: am335x-evm: Fix PHY mode for ethernet ARM: dts: am335x-evmsk: Fix PHY mode for ethernet arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal ARM: dts: armada-xp: fix Armada XP boards NAND description
2019-02-22Merge tag 'arc-5.0-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Fixes for ARC for 5.0, bunch of those are stable fodder anyways so sooner the better. - Fix memcpy to prevent prefetchw beyond end of buffer [Eugeniy] - Enable unaligned access early to prevent exceptions given newer gcc code gen [Eugeniy] - Tighten up uboot arg checking to prevent false negatives and also allow both jtag and bootloading to coexist w/o config option as needed by kernelCi folks [Eugeniy] - Set slab alignment to 8 for ARC to avoid the atomic64_t unalign [Alexey] - Disable regfile auto save on interrupts on HSDK platform due to a silicon issue [Vineet] - Avoid HS38x boot printing crash by not reading HS48x only reg [Vineet]" * tag 'arc-5.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: don't assume core 0x54 has dual issue ARC: define ARCH_SLAB_MINALIGN = 8 ARC: enable uboot support unconditionally ARC: U-boot: check arguments paranoidly ARCv2: support manual regfile save on interrupts ARC: uacces: remove lp_start, lp_end from clobber list ARC: fix actionpoints configuration detection ARCv2: lib: memcpy: fix doing prefetchw outside of buffer ARCv2: Enable unaligned access in early ASM code
2019-02-23bpf, doc: add bpf list as secondary entry to maintainers fileDaniel Borkmann
We recently created a bpf@vger.kernel.org list (https://lore.kernel.org/bpf/) for BPF related discussions, originally in context of BPF track at LSF/MM for topic discussions. It's *optional* but *desirable* to keep it in Cc for BPF related kernel/loader/llvm/tooling threads, meaning also infrastructure like llvm that sits on top of kernel but is crucial to BPF. In any case, netdev with it's bpf delegate is *as-is* today primary list for patches, so nothing changes in the workflow. Main purpose is to have some more awareness for the bpf@vger.kernel.org list that folks can Cc for BPF specific topics. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-22Merge branch 'parisc-5.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Fix ptrace syscall number modification which has been broken since kernel v4.5 and provide alternative email addresses for the remaining users of the retired parisc-linux.org email domain" * 'parisc-5.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: CREDITS/MAINTAINERS: Retire parisc-linux.org email domain parisc: Fix ptrace syscall number modification
2019-02-22Merge tag 'kbuild-fixes-v5.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild fixes from Masahiro Yamada: - fix scripts/kallsyms.c to correctly check too long symbol names - fix sh build error for the combination of CONFIG_OF_EARLY_FLATTREE=y and CONFIG_USE_BUILTIN_DTB=n * tag 'kbuild-fixes-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: sh: fix build error for invisible CONFIG_BUILTIN_DTB_SOURCE kallsyms: Handle too long symbols in kallsyms.c
2019-02-22Merge branch 'udp-a-few-fixes'David S. Miller
Paolo Abeni says: ==================== udp: a few fixes This series includes some UDP-related fixlet. All this stuff has been pointed out by the sparse tool. The first two patches are just annotation related, while the last 2 cover some very unlikely races. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22udp: fix possible user after free in error handlerPaolo Abeni
Similar to the previous commit, this addresses the same issue for ipv4: use a single fetch operation and use the correct rcu annotation. Fixes: e7cc082455cb ("udp: Support for error handlers of tunnels with arbitrary destination port") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22udpv6: fix possible user after free in error handlerPaolo Abeni
Before derefencing the encap pointer, commit e7cc082455cb ("udp: Support for error handlers of tunnels with arbitrary destination port") checks for a NULL value, but the two fetch operation can race with removal. Fix the above using a single access. Also fix a couple of type annotations, to make sparse happy. Fixes: e7cc082455cb ("udp: Support for error handlers of tunnels with arbitrary destination port") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22fou6: fix proto error handler argument typePaolo Abeni
Last argument of gue6_err_proto_handler() has a wrong type annotation, fix it and make sparse happy again. Fixes: b8a51b38e4d4 ("fou, fou6: ICMP error handlers for FoU and GUE") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22udpv6: add the required annotation to mib typePaolo Abeni
In commit 029a37434880 ("udp6: cleanup stats accounting in recvmsg()") I forgot to add the percpu annotation for the mib pointer. Add it, and make sparse happy. Fixes: 029a37434880 ("udp6: cleanup stats accounting in recvmsg()") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22mdio_bus: Fix use-after-free on device_register failsYueHaibing
KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus. KASAN report details as below: BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524 CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy] ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 Allocated by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kfree+0xe1/0x270 mm/slub.c:3938 device_release+0x78/0x200 drivers/base/core.c:919 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 put_device+0x1c/0x30 drivers/base/core.c:2060 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc824c80 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 248 bytes inside of 2048-byte region [ffff8881dc824c80, ffff8881dc825480) The buggy address belongs to the page: page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000010200(slab|head) raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800 raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge branch 'net-phy-at803x-Update-delays-for-RGMII-modes'David S. Miller
Vinod Koul says: ==================== net: phy: at803x: Update delays for RGMII modes Peter[1] reported that patch cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") caused regression on am335x-evmsk board. This board expects the Phy delay to be enabled but specified RGMII mode which refers to delays being disabled. So fix this by disabling delay only for RGMII mode and enable for RGMII_ID and RGMII_TXID/RXID modes. While at it, as pointed by Dave, don't inline the helpers. [1]: https://www.spinics.net/lists/netdev/msg550749.html Changes in v4: - fix log & comments nbased on Marc's feedback ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: phy: at803x: disable delay only for RGMII modeVinod Koul
Per "Documentation/devicetree/bindings/net/ethernet.txt" RGMII mode should not have delay in PHY whereas RGMII_ID and RGMII_RXID/RGMII_TXID can have delay in PHY. So disable the delay only for RGMII mode and enable for other modes. Also treat the default case as disabled delays. Fixes: cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Peter Ujfalusi <peter.ujflausi@ti.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: phy: at803x: don't inline helpersVinod Koul
Some helpers were declared with the "inline" function specifier. It is preferable to let the compiler pick the right optimizations, so drop the specifier for at803x_disable_rx_delay() and at803x_disable_tx_delay() Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Peter Ujfalusi <peter.ujflausi@ti.com> Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net_sched: initialize net pointer inside tcf_exts_init()Cong Wang
For tcindex filter, it is too late to initialize the net pointer in tcf_exts_validate(), as tcf_exts_get_net() requires a non-NULL net pointer. We can just move its initialization into tcf_exts_init(), which just requires an additional parameter. This makes the code in tcindex_alloc_perfect_hash() prettier. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 10:15:45 +0000