summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-22drm/amd/display: access ABM from stream resource.Yongqiang Sun
[Why] Since ABM resource is mapped to stream res, all the ABM access should via stream res. [How] Get ABM instance from stream res instead of resource pool. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: blank dp stream before re-train the linkXiaodong Yan
[Why] When link loss happened, monitor can not light up if only re-train the link. [How] Blank all the DP streams on this link before re-train the link, and then unblank the stream Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: DispalyPort: Write OUI only if panel supports itAurabindo Pillai
[why] Organizational Unit Identifier register is optional, and its presence is published via Down Stream Port Count register. Writing this register when not available will result in errors [how] Read this register and continue writing OUI only if the panel has the support advertised. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: change from panel to panel cntlAnthony Koo
[Why] it doesn't represent panel specifically, it's more like the control logic for the panel [How] change from panel to panel cntl to make it a bit more clear Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Add HW rotation cursor changes to dcn10Jaehyun Chung
[Why] HW rotation was enabled in DAL3 but hubp cursor calculations for HW roation were only added to dcn20. [How] Add hubp cursor position calculation changes to dcn10. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Factor in immediate flip support into DLG calculationsNicholas Kazlauskas
[Why] We expect to be able to perform immediate flipping without having to recalculate and update all the watermarks. There are certain usecases today (1080p @ 90deg, 2160p @ 90deg) such that we get a urgency value of 0 for frac_urg_bw_flip because we're explicitly passing in a value of "false" for requiring immediate flip support into the DLG calculation. [How] Always pass in true into the calculation. With this we get a correct non-zero value for frac_urg_bw_flip. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: fix virtual signal dsc setupDmytro Laktyushkin
This prevents dpcd access on virtual links. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: destroy panel on link destructAnthony Koo
[Why] without destroy it is causing a memory leak [How] destroy panel on link destruct Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: dmcu wait loop calculation is incorrect in RVPaul Hsieh
[Why] Driver already get display clock from SMU base on MHz, but driver read again and mutiple 1000 cause wait loop value is overflow. [How] remove coding error Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: move panel power seq to new panel structAnthony Koo
[Why] panel power sequencer is currently just sitting in hwseq but it really it tied to internal panels [How] make a new panel struct to contain power sequencer code Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: make all backlight calls link basedAnthony Koo
[Why] Backlight adjustment is tied to a specific display. So make the calls target a link rather than making it a global state. [How] make all backlight calls link based Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Cap certain DML values for Low Pix Clk on DCN2.1Sung Lee
[WHY] In certain conditions with low pixel clock, some values in DML may go past the max due to margining for latency hiding. This causes assertions to get hit. [HOW] If the pixel clock is low and some values are high, cap it to the max. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Various fixes for PSR on DMCUBWyatt Wood
[Why] - Driver does not recognize new definitions of psr states. - Internal tool is required for checking if psr is active. [How] - Parse psr state correctly so that driver will recognize psr state. - Add visual confirmation that psr is active using existing mechanisms. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: 3.2.81Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Update MPCC if requestedAric Cyr
Don't skip MPCC tree updates if requested. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Fix HDR visual confirmAric Cyr
Some cases were incorrectly reporting the wrong visual confirm, even though they were working as expected. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Use the correct input TF for video formatsNicholas Kazlauskas
[Why] Color blending for NV12 formats is incorrect because we're using the predefined SRGB degamma. [How] Calculate the correct input transfer function for degamma from the color module depending on what the actual surface format is. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Change infopacket type programmingHaiyi Zhou
[Why] Certain displays may experience blanking if infopacket max range does not equal nominal refresh rate. [How] Add additional infopacket versions to program range to full or forced range in freesync states. This does not change the vrr logic. Signed-off-by: Haiyi Zhou <haiyi.zhou@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Avoid NULL pointer in set_backlight when ABM is NULLNicholas Kazlauskas
[Why] On ASIC without ABM support (most dGPU) we run into a null pointer dereference when attempting to set the backlight level. [How] This function requires ABM, so fix up the condition to only allow DMCU to be optional. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: fix stream setting for diags on siliconDmytro Laktyushkin
We need to set up stream even with virtual displays when running diags. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Cast int to float before divisionSung Lee
[Why]: Some inputs to dml_ceil have it dividied by int which causes a truncation. This loss of precision means the ceil function becomes redundant and does not round up. [How]: Cast parameter to float before division. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Set meta_chunk_value to 0 in DML if DCC disabled in DCN2.1Sung Lee
[WHY]: Calculating refcyc_per_meta_chunk_vblank_l when DCC is disabled may lead to a large number causing an assert to get hit. In VBA, this value is 0 when DCC is disabled. [HOW]: Set value to 0 to avoid hitting the assert. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: add optc get crc support for timings with ODM/DSCWenjing Liu
[why] Optc needs to know if timing is enabled with ODM or DSC before computing crc. Otherwise value computed will be inaccurate. Before this change, the CRC computed without ODM is not equal to the CRC computed with ODM for the same timing. This is unexpected as we are driving the same timing despite of the underlaying hardware setup to achieve it. This is caused by missing hardware programming sequence to support it. [how] Add the new programming sequence based on hardware guide. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Workaround to disable YCbCrJinze Xu
[Why] Some mst dock can't translate DP to HDMI properly. [How] Bypass YCbCr timings on specific MST device. Signed-off-by: Jinze Xu <jinze.xu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Check ramp != NULL before applying lut1d for degammaNicholas Kazlauskas
[Why] A NULL ramp is a valid configuration for passing into mod_color_calculate_degamma_params but we'll hit a NULL pointer if we do so. We need this in order to get the right transfer function to do degamma on NV12 formats where we aren't supplied with a custom user degamma. [How] Add the NULL check. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Unify psr feature flagsWyatt Wood
[Why] As it stands, psr has feature flags in dm, stream, and link. Most are not defined well enough, and different dm layers have different uses for these same flags. [How] We define a new structure called psr_settings in dc_link that will hold the following psr feature flags: psr_feature_enable - psr is supported psr_allow_active - psr is currently active psr_version - internal psr version supported psr_frame_capture_indication_req psr_sdp_transmit_line_num_deadline The last two flags were moved out of the power module for the purposes of consolidating psr flags. Their use is already well-defined. Psr caps reported by sink will also be stored in dc_link, in dpcd_caps.psr_caps. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Support plane-level gamut remap in DMStylon Wang
[Why] Plane-level gamut remap is not enabled in DM, which is necessary to support CTM as a plane-level property. [How] Enable gamut remap in DM. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Add SetBacklight call to abm on dmcubWyatt Wood
[Why] Set backlight calls to firmware are are being prevented by dmcu == null check. Dmcu is expected to be null in this case. [How] Only prevent call if dmcu and abm are null. Also rename variable 'use_smooth_brightness' to 'fw_set_brightness' as it's more appropriate. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Remove byte swapping for dmcub abm config tableWyatt Wood
[Why] Since x86 and dmcub are both little endian, byte swapping isn't necessary. Dmcu requires byte swapping as it is big endian. [How] Add flag to function definitions to determine if byte swapping is necessary. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Force watermark value propagationJoshua Aberback
[Why] The HUBBUB watermark registers are in an area that cannot be power gated, but the HUBP copies of the watermark values are in areas that can be power gated. When we power on a pipe, it will not automatically take the HUBBUB values, we need to force propagation by writing to a watermark register. [How] - new HUBBUB function to re-write current value in a WM register - touch WM register after enabling the plane in program_pipe Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Move enable fractional pwm callWyatt Wood
[Why] Dmcu init fw call has some logic to initialize abm values. Since this doesn't exist on dmcub, must find a proper place for it in the abm sequence. [How] Move enable fractional pwm call. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Add user backlight level reg writeWyatt Wood
[Why] Porting abm from dmcu to dmcub missed one register write. [How] Add this register write in the SetBacklightLevel sequence. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Correct updating logic of dcn21's pipe VM flagsDale Zhao
[Why]: Renoir's pipe VM flags are not correctly updated if pipe strategy has changed during some scenarios. It will result in watermarks mistakenly calculation, thus underflow and garbage appear. [How]: Correctly update pipe VM flags to pipes which have been populated. Signed-off-by: Dale Zhao <dale.zhao@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Remove aconnector condition check for dpcd readZhan Liu
[Why] Aconnector is not necessary to be NULL in order to read dpcd successfully. Actually if we rely on checking aconnector here, we won't be able to turn off all displays before doing display detection. That will cause some MST hubs not able to light up. [How] Remove aconnector check when turning off all displays at hardware initialization stage. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Joseph Gravenor <joseph.gravenor@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/dc: remove unused variable 'video_optimized_pixel_rates'YueHaibing
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:1017:50: warning: ‘video_optimized_pixel_rates’ defined but not used [-Wunused-const-variable=] static const struct pixel_rate_range_table_entry video_optimized_pixel_rates[] = { ^~~~~~~~~~~~~~~~~~~~~~~~~~~ commit d8cd587d2bfd ("drm/amd/display: removing MODULO change for dcn2") left behind this unused vairable, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/powerplay: remove defined but not used variablesJason Yan
Fix the following gcc warning: drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/vega10_powertune.c:710:46: warning: ‘PSMGCEDCThresholdConfig_vega10’ defined but not used [-Wunused-const-variable=] static const struct vega10_didt_config_reg PSMGCEDCThresholdConfig_vega10[] = ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/vega10_powertune.c:654:46: warning: ‘PSMSEEDCThresholdConfig_Vega10’ defined but not used [-Wunused-const-variable=] static const struct vega10_didt_config_reg PSMSEEDCThresholdConfig_Vega10[] = ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: fix race between pstate and remote buffer mapJonathan Kim
Vega20 arbitrates pstate at hive level and not device level. Last peer to remote buffer unmap could drop P-State while another process is still remote buffer mapped. With this fix, P-States still needs to be disabled for now as SMU bug was discovered on synchronous P2P transfers. This should be fixed in the next FW update. Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu/display: give aux i2c buses more meaningful namesAlex Deucher
Mirror what we do for i2c display buses. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu/display: fix aux registration (v2)Alex Deucher
We were registering the aux device in the MST late_register rather than the regular one. v2: handle eDP as well Fixes: 405a1f9090d1ac ("drm/amdgpu/display: split dp connector registration (v4)") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1100 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com>
2020-04-22drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay ↵Sandeep Raghuraman
table v0 (e.g Hawaii) Initialize thermal controller fields in the PowerPlay table for Hawaii GPUs, so that fan speeds are reported. Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22Revert "drm/amdgpu: Disable gfx off if VCN is busy"James Zhu
This reverts commit 3fded222f4bf7f4c56ef4854872a39a4de08f7a8 This is work around for vcn1 only. Currently vcn1 has separate begin_use and idle work handle. Signed-off-by: James Zhu <James.Zhu@amd.com> Tested-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: fix kernel page fault issue by ras recovery on sGPUGuchun Chen
When running ras uncorrectable error injection and triggering GPU reset on sGPU, below issue is observed. It's caused by the list uninitialized when accessing. [ 80.047227] BUG: unable to handle page fault for address: ffffffffc0f4f750 [ 80.047300] #PF: supervisor write access in kernel mode [ 80.047351] #PF: error_code(0x0003) - permissions violation [ 80.047404] PGD 12c20e067 P4D 12c20e067 PUD 12c210067 PMD 41c4ee067 PTE 404316061 [ 80.047477] Oops: 0003 [#1] SMP PTI [ 80.047516] CPU: 7 PID: 377 Comm: kworker/7:2 Tainted: G OE 5.4.0-rc7-guchchen #1 [ 80.047594] Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018 [ 80.047888] Workqueue: events amdgpu_ras_do_recovery [amdgpu] Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: John Clements <John.Clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: Disable FRU read on ArcturusKent Russell
Update the list with supported Arcturus chips, but disable for now until final list is confirmed. Ideally we can poll atombios for FRU support, instead of maintaining this list of chips, but this will enable serial number reading for supported ASICs for the time-being. Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/powerplay: fix resume failed as smu table initialize early exitPrike Liang
When the amdgpu in the suspend/resume loop need notify the dpm disabled, otherwise the smu table will be uninitialize and result in resume failed. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Tested-by: Mengbing Wang <Mengbing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu/gmc: Fix spelling mistake.Rajneesh Bhardwaj
Fixes a minor typo in the file. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: cache smu fw version infoJohn Clements
reduce cmd submission to smu by caching version info Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22Revert "drm/amdgpu: use the BAR if possible in amdgpu_device_vram_access v2"Kent Russell
This reverts commit c12b84d6e0d70f1185e6daddfd12afb671791b6e. The original patch causes a RAS event and subsequent kernel hard-hang when running the KFDMemoryTest.PtraceAccessInvisibleVram on VG20 and Arcturus dmesg output at hang time: [drm] RAS event of type ERREVENT_ATHUB_INTERRUPT detected! amdgpu 0000:67:00.0: GPU reset begin! Evicting PASID 0x8000 queues Started evicting pasid 0x8000 qcm fence wait loop timeout expired The cp might be in an unrecoverable state due to an unsuccessful queues preemption Failed to evict process queues Failed to suspend process 0x8000 Finished evicting pasid 0x8000 Started restoring pasid 0x8000 Finished restoring pasid 0x8000 [drm] UVD VCPU state may lost due to RAS ERREVENT_ATHUB_INTERRUPT amdgpu: [powerplay] Failed to send message 0x26, response 0x0 amdgpu: [powerplay] Failed to set soft min gfxclk ! amdgpu: [powerplay] Failed to upload DPM Bootup Levels! amdgpu: [powerplay] Failed to send message 0x7, response 0x0 amdgpu: [powerplay] [DisableAllSMUFeatures] Failed to disable all smu features! amdgpu: [powerplay] [DisableDpmTasks] Failed to disable all smu features! amdgpu: [powerplay] [PowerOffAsic] Failed to disable DPM! [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <powerplay> failed -5 Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu/gfx9: add gfxoff quirkAlex Deucher
Fix screen corruption with firefox. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=207171 Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: set mp1 state before reloadJohn Clements
Set MP1 state to prepare for unload before reloading SMU FW Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: update psp fw loading sequenceJohn Clements
Added dedicated function to check if particular fw should be skipped from loading. Added dedicated function for SMU FW loading via PSP Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 05:25:39 +0000