Age | Commit message (Collapse) | Author |
|
Commit 1ea0d3b46798 ("platform/x86: asus-wmi: Simplify tablet-mode-switch
handling") unified the asus-wmi tablet-switch handling, but it did not take
into account that the value returned for the kbd_dock_devid WMI method is
inverted where as the other ones are not inverted.
This causes asus-wmi to report an inverted tablet-switch state for devices
which use the kbd_dock_devid, which causes libinput to ignore touchpad
events while the affected T10x model 2-in-1s are docked.
Add inverting of the return value in the kbd_dock_devid case to fix this.
Fixes: 1ea0d3b46798 ("platform/x86: asus-wmi: Simplify tablet-mode-switch handling")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230120143441.527334-1-hdegoede@redhat.com
|
|
To the best of my knowledge this is the same board as the B450M DS3H-CF,
but with an added WiFi card. Name obtained using dmidecode, tested
with force_load on v6.1.6
Signed-off-by: Kevin Kuriakose <kevinmkuriakose@gmail.com>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230119150925.31962-1-kevinmkuriakose@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support to map the "HP Omen Key" to KEY_PROG2. Laptops in the HP
Omen Series open the HP Omen Command Center application on windows. But,
on linux it fails with the following message from the hp-wmi driver:
[ 5143.415714] hp_wmi: Unknown event_id - 29 - 0x21a5
Also adds support to map Fn+Esc to KEY_FN_ESC. This currently throws the
following message on the hp-wmi driver:
[ 6082.143785] hp_wmi: Unknown key code - 0x21a7
There is also a "Win-Lock" key on HP Omen Laptops which supports
Enabling and Disabling the Windows key, which trigger commands 0x21a4
and 0x121a4 respectively, but I wasn't able to find any KEY in input.h
to map this to.
Signed-off-by: Rishit Bansal <rishitbansal0@gmail.com>
Link: https://lore.kernel.org/r/20230120221214.24426-1-rishitbansal0@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some platforms send the speaker-mute key from EC. dell-wmi can't
recognize it.
Add a new keymap for KEY_MUTE in type 0x0010 table.
Signed-off-by: Koba Ko <koba.ko@canonical.com>
Link: https://lore.kernel.org/r/20230117123436.200440-1-koba.ko@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
syzbot reported a use-after-free in do_accept(), precisely nr_accept()
as sk_prot_alloc() allocated the memory and sock_put() frees it. [0]
The issue could happen if the heartbeat timer is fired and
nr_heartbeat_expiry() calls nr_destroy_socket(), where a socket
has SOCK_DESTROY or a listening socket has SOCK_DEAD.
In this case, the first condition cannot be true. SOCK_DESTROY is
flagged in nr_release() only when the file descriptor is close()d,
but accept() is being called for the listening socket, so the second
condition must be true.
Usually, the AF_NETROM listener neither starts timers nor sets
SOCK_DEAD. However, the condition is met if connect() fails before
listen(). connect() starts the t1 timer and heartbeat timer, and
t1timer calls nr_disconnect() when timeout happens. Then, SOCK_DEAD
is set, and if we call listen(), the heartbeat timer calls
nr_destroy_socket().
nr_connect
nr_establish_data_link(sk)
nr_start_t1timer(sk)
nr_start_heartbeat(sk)
nr_t1timer_expiry
nr_disconnect(sk, ETIMEDOUT)
nr_sk(sk)->state = NR_STATE_0
sk->sk_state = TCP_CLOSE
sock_set_flag(sk, SOCK_DEAD)
nr_listen
if (sk->sk_state != TCP_LISTEN)
sk->sk_state = TCP_LISTEN
nr_heartbeat_expiry
switch (nr->state)
case NR_STATE_0
if (sk->sk_state == TCP_LISTEN &&
sock_flag(sk, SOCK_DEAD))
nr_destroy_socket(sk)
This path seems expected, and nr_destroy_socket() is called to clean
up resources. Initially, there was sock_hold() before nr_destroy_socket()
so that the socket would not be freed, but the commit 517a16b1a88b
("netrom: Decrease sock refcount when sock timers expire") accidentally
removed it.
To fix use-after-free, let's add sock_hold().
[0]:
BUG: KASAN: use-after-free in do_accept+0x483/0x510 net/socket.c:1848
Read of size 8 at addr ffff88807978d398 by task syz-executor.3/5315
CPU: 0 PID: 5315 Comm: syz-executor.3 Not tainted 6.2.0-rc3-syzkaller-00165-gd9fc1511728c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:306 [inline]
print_report+0x15e/0x461 mm/kasan/report.c:417
kasan_report+0xbf/0x1f0 mm/kasan/report.c:517
do_accept+0x483/0x510 net/socket.c:1848
__sys_accept4_file net/socket.c:1897 [inline]
__sys_accept4+0x9a/0x120 net/socket.c:1927
__do_sys_accept net/socket.c:1944 [inline]
__se_sys_accept net/socket.c:1941 [inline]
__x64_sys_accept+0x75/0xb0 net/socket.c:1941
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa436a8c0c9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fa437784168 EFLAGS: 00000246 ORIG_RAX: 000000000000002b
RAX: ffffffffffffffda RBX: 00007fa436bac050 RCX: 00007fa436a8c0c9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007fa436ae7ae9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffebc6700df R14: 00007fa437784300 R15: 0000000000022000
</TASK>
Allocated by task 5294:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:371 [inline]
____kasan_kmalloc mm/kasan/common.c:330 [inline]
__kasan_kmalloc+0xa3/0xb0 mm/kasan/common.c:380
kasan_kmalloc include/linux/kasan.h:211 [inline]
__do_kmalloc_node mm/slab_common.c:968 [inline]
__kmalloc+0x5a/0xd0 mm/slab_common.c:981
kmalloc include/linux/slab.h:584 [inline]
sk_prot_alloc+0x140/0x290 net/core/sock.c:2038
sk_alloc+0x3a/0x7a0 net/core/sock.c:2091
nr_create+0xb6/0x5f0 net/netrom/af_netrom.c:433
__sock_create+0x359/0x790 net/socket.c:1515
sock_create net/socket.c:1566 [inline]
__sys_socket_create net/socket.c:1603 [inline]
__sys_socket_create net/socket.c:1588 [inline]
__sys_socket+0x133/0x250 net/socket.c:1636
__do_sys_socket net/socket.c:1649 [inline]
__se_sys_socket net/socket.c:1647 [inline]
__x64_sys_socket+0x73/0xb0 net/socket.c:1647
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 14:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:518
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x13b/0x1a0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:177 [inline]
__cache_free mm/slab.c:3394 [inline]
__do_kmem_cache_free mm/slab.c:3580 [inline]
__kmem_cache_free+0xcd/0x3b0 mm/slab.c:3587
sk_prot_free net/core/sock.c:2074 [inline]
__sk_destruct+0x5df/0x750 net/core/sock.c:2166
sk_destruct net/core/sock.c:2181 [inline]
__sk_free+0x175/0x460 net/core/sock.c:2192
sk_free+0x7c/0xa0 net/core/sock.c:2203
sock_put include/net/sock.h:1991 [inline]
nr_heartbeat_expiry+0x1d7/0x460 net/netrom/nr_timer.c:148
call_timer_fn+0x1da/0x7c0 kernel/time/timer.c:1700
expire_timers+0x2c6/0x5c0 kernel/time/timer.c:1751
__run_timers kernel/time/timer.c:2022 [inline]
__run_timers kernel/time/timer.c:1995 [inline]
run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035
__do_softirq+0x1fb/0xadc kernel/softirq.c:571
Fixes: 517a16b1a88b ("netrom: Decrease sock refcount when sock timers expire")
Reported-by: syzbot+5fafd5cfe1fc91f6b352@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230120231927.51711-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The DRM fbdev emulation layer sets the struct fb_info .fbdefio field to
a struct fb_deferred_io pointer, that is shared across all drivers that
use the generic drm_fbdev_generic_setup() helper function.
It is a problem because the fbdev core deferred I/O logic assumes that
the struct fb_deferred_io data is not shared between devices, and it's
stored there state such as the list of pages touched and a mutex that
is use to synchronize between the fb_deferred_io_track_page() function
that track the dirty pages and fb_deferred_io_work() workqueue handler
doing the actual deferred I/O.
The latter can lead to the following error, since it may happen that two
drivers are probed and then one is removed, which causes the mutex bo be
destroyed and not existing anymore by the time the other driver tries to
grab it for the fbdev deferred I/O logic:
[ 369.756553] ------------[ cut here ]------------
[ 369.756604] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 369.756631] WARNING: CPU: 2 PID: 1023 at kernel/locking/mutex.c:582 __mutex_lock+0x348/0x424
[ 369.756744] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ip
v6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr btsdio bluetooth sunrpc brcmfmac snd_soc_hdmi_codec cpufreq_dt cfg80211 vfat fat vc4 rfkill brcmutil raspberrypi_cpufreq i2c_bcm2835 iproc_rng200 bcm2711_thermal snd_soc_core snd_pcm_dmaen
gine leds_gpio nvmem_rmem joydev hid_cherry uas usb_storage gpio_raspberrypi_exp v3d snd_pcm raspberrypi_hwmon gpu_sched bcm2835_wdt broadcom bcm_phy_lib snd_timer genet snd mdio_bcm_unimac clk_bcm2711_dvp soundcore drm_display_helper pci
e_brcmstb cec ip6_tables ip_tables fuse
[ 369.757400] CPU: 2 PID: 1023 Comm: fbtest Not tainted 5.19.0-rc6+ #94
[ 369.757455] Hardware name: raspberrypi,4-model-b Raspberry Pi 4 Model B Rev 1.4/Raspberry Pi 4 Model B Rev 1.4, BIOS 2022.10 10/01/2022
[ 369.757538] pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 369.757596] pc : __mutex_lock+0x348/0x424
[ 369.757635] lr : __mutex_lock+0x348/0x424
[ 369.757672] sp : ffff80000953bb00
[ 369.757703] x29: ffff80000953bb00 x28: ffff17fdc087c000 x27: 0000000000000002
[ 369.757771] x26: ffff17fdc349f9b0 x25: fffffc5ff72e0100 x24: 0000000000000000
[ 369.757838] x23: 0000000000000000 x22: 0000000000000002 x21: ffffa618df636f10
[ 369.757903] x20: ffff80000953bb68 x19: ffffa618e0f18138 x18: 0000000000000001
[ 369.757968] x17: 0000000020000000 x16: 0000000000000002 x15: 0000000000000000
[ 369.758032] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47
[ 369.758097] x11: 00000000ffffdfff x10: ffffa618e0c79f88 x9 : ffffa618de472484
[ 369.758162] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 00000000000affa8
[ 369.758227] x5 : 0000000000001fff x4 : 0000000000000000 x3 : 0000000000000027
[ 369.758292] x2 : 0000000000000001 x1 : ffff17fdc087c000 x0 : 0000000000000028
[ 369.758357] Call trace:
[ 369.758383] __mutex_lock+0x348/0x424
[ 369.758420] mutex_lock_nested+0x4c/0x5c
[ 369.758459] fb_deferred_io_mkwrite+0x78/0x1d8
[ 369.758507] do_page_mkwrite+0x5c/0x19c
[ 369.758550] wp_page_shared+0x70/0x1a0
[ 369.758590] do_wp_page+0x3d0/0x510
[ 369.758628] handle_pte_fault+0x1c0/0x1e0
[ 369.758670] __handle_mm_fault+0x250/0x380
[ 369.758712] handle_mm_fault+0x17c/0x3a4
[ 369.758753] do_page_fault+0x158/0x530
[ 369.758792] do_mem_abort+0x50/0xa0
[ 369.758831] el0_da+0x78/0x19c
[ 369.758864] el0t_64_sync_handler+0xbc/0x150
[ 369.758904] el0t_64_sync+0x190/0x194
[ 369.758942] irq event stamp: 11395
[ 369.758973] hardirqs last enabled at (11395): [<ffffa618de472554>] __up_console_sem+0x74/0x80
[ 369.759042] hardirqs last disabled at (11394): [<ffffa618de47254c>] __up_console_sem+0x6c/0x80
[ 369.760554] softirqs last enabled at (11392): [<ffffa618de330a74>] __do_softirq+0x4c4/0x6b8
[ 369.762060] softirqs last disabled at (11383): [<ffffa618de3c9124>] __irq_exit_rcu+0x104/0x214
[ 369.763564] ---[ end trace 0000000000000000 ]---
Fixes: d536540f304c ("drm/fb-helper: Add generic fbdev emulation .fb_probe function")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-4-javierm@redhat.com
|
|
The fb_deferred_io_init() can fail and return an errno code but currently
there is no check for its return value.
Fix that and propagate to errno to the caller in the case of a failure.
Fixes: d536540f304c ("drm/fb-helper: Add generic fbdev emulation .fb_probe function")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-3-javierm@redhat.com
|
|
Jakub Kicinski says:
====================
Netlink protocol specs
I think the Netlink proto specs are far along enough to merge.
Filling in all attribute types and quirks will be an ongoing
effort but we have enough to cover FOU so it's somewhat complete.
I fully intend to continue polishing the code but at the same
time I'd like to start helping others base their work on the
specs (e.g. DPLL) and need to start working on some new families
myself.
That's the progress / motivation for merging. The RFC [1] has more
of a high level blurb, plus I created a lot of documentation, I'm
not going to repeat it here. There was also the talk at LPC [2].
[1] https://lore.kernel.org/all/20220811022304.583300-1-kuba@kernel.org/
[2] https://youtu.be/9QkXIQXkaQk?t=2562
v2: https://lore.kernel.org/all/20220930023418.1346263-1-kuba@kernel.org/
v3: https://lore.kernel.org/all/20230119003613.111778-1-kuba@kernel.org/1
v4:
- spec improvements (patch 2)
- Python cleanup (patch 3)
- rename auto-gen files and use the right comment style
====================
Link: https://lore.kernel.org/r/20230120175041.342573-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a CLI sample which can take in arbitrary request
in JSON format, convert it to Netlink and do the inverse
for output.
It's meant as a development tool primarily and perhaps
for selftests which need to tickle netlink in a special way.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Generate and plug in the spec-based tables.
A little bit of renaming is needed in the FOU code.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We'll need to link two objects together to form the fou module.
This means the source can't be called fou, the build system expects
fou.o to be the combined object.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Regenerate the FOU uAPI header from the YAML spec.
The flags now come before attributes which use them,
and the comments for type disappear (coders should look
at the spec instead).
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
FOU has a reasonably modern Genetlink family. Add a spec.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Code generators to turn Netlink specs into C code.
I'm definitely not proud of it.
The main generator is in Python, there's a bash script
to regen all code-gen'ed files in tree after making
spec changes.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add schemas for Netlink spec files. As described in the docs
we have 4 "protocols" or compatibility levels, and each one
comes with its own schema, but the more general / legacy
schemas are superset of more modern ones: genetlink is
the smallest followed by genetlink-c and genetlink-legacy.
There is no schema for raw netlink, yet, I haven't found the time..
I don't know enough jsonschema to do inheritance or something
but the repetition is not too bad. I hope.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add documentation about the upcoming Netlink protocol specs.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Davide Caratti says:
====================
net/sched: use the backlog for nested mirred ingress
TC mirred has a protection against excessive stack growth, but that
protection doesn't really guarantee the absence of recursion, nor
it guards against loops. Patch 1/2 rewords "recursion" to "nesting" to
make this more clear.
We can leverage on this existing mechanism to prevent TCP / SCTP from doing
soft lock-up in some specific scenarios that uses mirred egress->ingress:
patch 2 changes mirred so that the networking backlog is used for nested
mirred ingress actions.
====================
Link: https://lore.kernel.org/r/cover.1674233458.git.dcaratti@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
William reports kernel soft-lockups on some OVS topologies when TC mirred
egress->ingress action is hit by local TCP traffic [1].
The same can also be reproduced with SCTP (thanks Xin for verifying), when
client and server reach themselves through mirred egress to ingress, and
one of the two peers sends a "heartbeat" packet (from within a timer).
Enqueueing to backlog proved to fix this soft lockup; however, as Cong
noticed [2], we should preserve - when possible - the current mirred
behavior that counts as "overlimits" any eventual packet drop subsequent to
the mirred forwarding action [3]. A compromise solution might use the
backlog only when tcf_mirred_act() has a nest level greater than one:
change tcf_mirred_forward() accordingly.
Also, add a kselftest that can reproduce the lockup and verifies TC mirred
ability to account for further packet drops after TC mirred egress->ingress
(when the nest level is 1).
[1] https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/Y0w%2FWWY60gqrtGLp@pop-os.localdomain/
[3] such behavior is not guaranteed: for example, if RPS or skb RX
timestamping is enabled on the mirred target device, the kernel
can defer receiving the skb and return NET_RX_SUCCESS inside
tcf_mirred_forward().
Reported-by: William Zhao <wizhao@redhat.com>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
growth
with commit e2ca070f89ec ("net: sched: protect against stack overflow in
TC act_mirred"), act_mirred protected itself against excessive stack growth
using per_cpu counter of nested calls to tcf_mirred_act(), and capping it
to MIRRED_RECURSION_LIMIT. However, such protection does not detect
recursion/loops in case the packet is enqueued to the backlog (for example,
when the mirred target device has RPS or skb timestamping enabled). Change
the wording from "recursion" to "nesting" to make it more clear to readers.
CC: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Same issue as SP513-54N: Headset microphone does not work without
ALC255_FIXUP_ACER_MIC_NO_PRESENCE fixup.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211853
Cc: <stable@vger.kernel.org>
Signed-off-by: Victor Shyba <victor1984@riseup.net>
Link: https://lore.kernel.org/r/20230123222129.17589-1-victor1984@riseup.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Siddharth Vadapalli says:
====================
Fix CPTS release action in am65-cpts driver
Delete unreachable code in am65_cpsw_init_cpts() function, which was
Reported-by: Leon Romanovsky <leon@kernel.org>
at:
https://lore.kernel.org/r/Y8aHwSnVK9+sAb24@unreal
Remove the devm action associated with am65_cpts_release() and invoke the
function directly on the cleanup and exit paths.
v4:
https://lore.kernel.org/r/20230120044201.357950-1-s-vadapalli@ti.com/
v3:
https://lore.kernel.org/r/20230118095439.114222-1-s-vadapalli@ti.com/
v2:
https://lore.kernel.org/r/20230116044517.310461-1-s-vadapalli@ti.com/
v1:
https://lore.kernel.org/r/20230113104816.132815-1-s-vadapalli@ti.com/
====================
Link: https://lore.kernel.org/r/20230120070731.383729-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The am65_cpts_release() function is registered as a devm_action in the
am65_cpts_create() function in am65-cpts driver. When the am65-cpsw driver
invokes am65_cpts_create(), am65_cpts_release() is added in the set of devm
actions associated with the am65-cpsw driver's device.
In the event of probe failure or probe deferral, the platform_drv_probe()
function invokes dev_pm_domain_detach() which powers off the CPSW and the
CPSW's CPTS hardware, both of which share the same power domain. Since the
am65_cpts_disable() function invoked by the am65_cpts_release() function
attempts to reset the CPTS hardware by writing to its registers, the CPTS
hardware is assumed to be powered on at this point. However, the hardware
is powered off before the devm actions are executed.
Fix this by getting rid of the devm action for am65_cpts_release() and
invoking it directly on the cleanup and exit paths.
Fixes: f6bd59526ca5 ("net: ethernet: ti: introduce am654 common platform time sync driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The am65_cpts_create() function returns -EOPNOTSUPP only when the config
"CONFIG_TI_K3_AM65_CPTS" is disabled. Also, in the am65_cpsw_init_cpts()
function, am65_cpts_create() can only be invoked if the config
"CONFIG_TI_K3_AM65_CPTS" is enabled. Thus, the error handling code for the
case in which the return value of am65_cpts_create() is -EOPNOTSUPP, is
unreachable. Hence delete it.
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This reverts commit (bff3d0534804: "netfilter: conntrack: add sctp
DATA_SENT state")
Using DATA/SACK to detect a new connection on secondary/alternate paths
works only on new connections, while a HEARTBEAT is required on
connection re-use. It is probably consistent to wait for HEARTBEAT to
create a secondary connection in conntrack.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
skb_header_pointer() will return NULL if offset + sizeof(_sch) exceeds
skb->len, so this offset < skb->len test is redundant.
if sch->length == 0, this will end up in an infinite loop, add a check
for sch->length > 0
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
RFC 9260, Sec 8.5.1 states that for ABORT/SHUTDOWN_COMPLETE, the chunk
MUST be accepted if the vtag of the packet matches its own tag and the
T bit is not set OR if it is set to its peer's vtag and the T bit is set
in chunk flags. Otherwise the packet MUST be silently dropped.
Update vtag verification for ABORT/SHUTDOWN_COMPLETE based on the above
description.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-20 (iavf)
This series contains updates to iavf driver only.
Michal Schmidt converts single iavf workqueue to per adapter to avoid
deadlock issues.
Marcin moves setting of VLAN related netdev features to watchdog task to
avoid RTNL deadlock.
Stefan Assmann schedules immediate watchdog task execution on changing
primary MAC to avoid excessive delay.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: schedule watchdog immediately when changing primary MAC
iavf: Move netdev_update_features() into watchdog task
iavf: fix temporary deadlock and failure to set MAC address
====================
Link: https://lore.kernel.org/r/20230120211036.430946-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PHY initialization is supposed to run on every mode changes.
"lan87xx_config_aneg()" verifies every mode change using
"phy_modify_changed()" function. Earlier code had phy_modify_changed()
followed by genphy_soft_reset. But soft_reset resets all the
pre-configured register values to default state, and lost all the
initialization done. With this reason gen_phy_reset was removed.
But it need to go through init sequence each time the mode changed.
Update lan87xx_config_aneg() to invoke phy_init once successful mode
update is detected.
PHY init sequence added in lan87xx_phy_init() have slave init
commands executed every time. Update the init sequence to run
slave init only if phydev is in slave mode.
Test setup contains LAN9370 EVB connected to SAMA5D3 (Running DSA),
and issue can be reproduced by connecting link to any of the available
ports after SAMA5D3 boot-up. With this issue, port will fail to
update link state. But once the SAMA5D3 is reset with LAN9370 link in
connected state itself, on boot-up link state will be reported as UP. But
Again after some time, if link is moved to DOWN state, it will not get
reported.
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230120104733.724701-1-rakesh.sankaranarayanan@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Arun Ramadoss says:
====================
net: dsa: microchip: add support for credit based shaper
LAN937x switch family, KSZ9477, KSZ9567, KSZ9563 and KSZ8563 supports
the credit based shaper. But there were few difference between LAN937x and KSZ
switch like
- number of queues for LAN937x is 8 and for others it is 4.
- size of credit increment register for LAN937x is 24 and for other is 16-bit.
This patch series add the credit based shaper with common implementation for
LAN937x and KSZ swithes.
====================
Link: https://lore.kernel.org/r/20230120052135.32120-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ9477, KSZ9567, KSZ9563, KSZ8563 and LAN937x supports Credit based
shaper. To differentiate the chip supporting cbs, tc_cbs_supported
flag is introduced in ksz_chip_data.
And KSZ series has 16bit Credit increment registers whereas LAN937x has
24bit register. The value to be programmed in the credit increment is
determined using the successive multiplication method to convert decimal
fraction to hexadecimal fraction.
For example: if idleslope is 10000 and sendslope is -90000, then
bandwidth is 10000 - (-90000) = 100000.
The 10% bandwidth of 100Mbps means 10/100 = 0.1(decimal). This value has
to be converted to hexa.
1) 0.1 * 16 = 1.6 --> fraction 0.6 Carry = 1 (MSB)
2) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
3) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
4) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
5) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9
6) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9 (LSB)
Now 0.1(decimal) becomes 0.199999(Hex).
If it is LAN937x, 24 bit value will be programmed to Credit Inc
register, 0x199999. For others 16 bit value will be prgrammed, 0x1999.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LAN937x family of switches has 8 queues per port where the KSZ switches
has 4 queues per port. By default, only one queue per port is enabled.
The queues are configurable in 2, 4 or 8. This patch add 8 number of
queues for LAN937x and 4 for other switches.
In the tag_ksz.c file, prioirty of the packet is queried using the skb
buffer and the corresponding value is updated in the tag.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The spin_lock irqsave/restore API variant in skb_defer_free_flush can
be replaced with the faster spin_lock irq variant, which doesn't need
to read and restore the CPU flags.
Using the unconditional irq "disable/enable" API variant is safe,
because the skb_defer_free_flush() function is only called during
NAPI-RX processing in net_rx_action(), where it is known the IRQs
are enabled.
Expected gain is 14 cycles from avoiding reading and restoring CPU
flags in a spin_lock_irqsave/restore operation, measured via a
microbencmark kernel module[1] on CPU E5-1650 v4 @ 3.60GHz.
Microbenchmark overhead of spin_lock+unlock:
- spin_lock_unlock_irq cost: 34 cycles(tsc) 9.486 ns
- spin_lock_unlock_irqsave cost: 48 cycles(tsc) 13.567 ns
We don't expect to see a measurable packet performance gain, as
skb_defer_free_flush() is called infrequently once per NIC device NAPI
bulk cycle and conditionally only if SKBs have been deferred by other
CPUs via skb_attempt_defer_free().
[1] https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/lib/time_bench_sample.c
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/167421646327.1321776.7390743166998776914.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
v4: fix deprecated typo.
Document that max_size is deprecated due to:
commit af6d10345ca7 ("ipv6: remove max_size check inline with ipv4")
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Link: https://lore.kernel.org/r/20230120232331.1273881-1-jmaxwell37@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix overlap detection in rbtree set backend: Detect overlap by going
through the ordered list of valid tree nodes. To shorten the number of
visited nodes in the list, this algorithm descends the tree to search
for an existing element greater than the key value to insert that is
greater than the new element.
2) Fix for the rbtree set garbage collector: Skip inactive and busy
elements when checking for expired elements to avoid interference
with an ongoing transaction from control plane.
This is a rather large fix coming at this stage of the 6.2-rc. Since
33c7aba0b4ff ("netfilter: nf_tables: do not set up extensions for end
interval"), bogus overlap errors in the rbtree set occur more frequently.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_rbtree: skip elements in transaction from garbage collection
netfilter: nft_set_rbtree: Switch to node list walk for overlap detection
====================
Link: https://lore.kernel.org/r/20230123211601.292930-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
My responsibilities at Intel have changed, so I'm handing off exclusive
MPTCP subsystem maintainer duties to Matthieu. It has been a privilege
to see MPTCP through its initial upstreaming and first few years in the
upstream kernel!
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20230120231121.36121-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Driver marked broadcast/multicast frames as offloaded incorrectly.
Mark them as offloaded only when HW offloading has been enabled.
This should happen only for ADIN2111 when both ports are bridged
by the software.
Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230120090846.18172-1-alexandru.tachici@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with commit eee16b147121 ("net: dsa: microchip: perform the
compatibility check for dev probed"), the KSZ switch driver now bails
out if it thinks the DT compatible doesn't match the actual chip ID
read back from the hardware:
ksz9477-switch 1-005f: Device tree specifies chip KSZ9893 but found
KSZ8563, please fix it!
For the KSZ8563, which used ksz_switch_chips[KSZ9893], this was fine
at first, because it indeed shares the same chip id as the KSZ9893.
Commit b44908095612 ("net: dsa: microchip: add separate struct
ksz_chip_data for KSZ8563 chip") started differentiating KSZ9893
compatible chips by consulting the 0x1F register. The resulting breakage
was fixed for the SPI driver in the same commit by introducing the
appropriate ksz_switch_chips[KSZ8563], but not for the I2C driver.
Fix this for I2C-connected KSZ8563 now to get it probing again.
Fixes: b44908095612 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip").
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230120110933.1151054-1-a.fatoum@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A bug was introduced by commit eedade12f4cb ("net: kfree_skb_list use
kmem_cache_free_bulk"). It unconditionally unlinked the SKB list via
invoking skb_mark_not_on_list().
In this patch we choose to remove the skb_mark_not_on_list() call as it
isn't necessary. It would be possible and correct to call
skb_mark_not_on_list() only when __kfree_skb_reason() returns true,
meaning the SKB is ready to be free'ed, as it calls/check skb_unref().
This fix is needed as kfree_skb_list() is also invoked on skb_shared_info
frag_list (skb_drop_fraglist() calling kfree_skb_list()). A frag_list can
have SKBs with elevated refcnt due to cloning via skb_clone_fraglist(),
which takes a reference on all SKBs in the list. This implies the
invariant that all SKBs in the list must have the same refcnt, when using
kfree_skb_list().
Reported-by: syzbot+c8a2e66e37eee553c4fd@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+c8a2e66e37eee553c4fd@syzkaller.appspotmail.com
Fixes: eedade12f4cb ("net: kfree_skb_list use kmem_cache_free_bulk")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/167421088417.1125894.9761158218878962159.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
if (!type)
continue;
if (type > RTAX_MAX)
return false;
...
fi_val = fi->fib_metrics->metrics[type - 1];
@type being used as an array index, we need to prevent
cpu speculation or risk leaking kernel memory content.
Fixes: 5f9ae3d9e7e4 ("ipv4: do metrics match when looking up and deleting a route")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230120133140.3624204-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
if (!type)
continue;
if (type > RTAX_MAX)
return -EINVAL;
...
metrics[type - 1] = val;
@type being used as an array index, we need to prevent
cpu speculation or risk leaking kernel memory content.
Fixes: 6cf9dfd3bd62 ("net: fib: move metrics parsing to a helper")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230120133040.3623463-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
netlink: annotate various data races
A recent syzbot report came to my attention.
After addressing it, I also fixed other related races.
====================
Link: https://lore.kernel.org/r/20230120125955.3453768-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netlink_getsockbyportid() reads sk_state while a concurrent
netlink_connect() can change its value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netlink_getname(), netlink_sendmsg() and netlink_getsockbyportid()
can read nlk->dst_portid and nlk->dst_group while another
thread is changing them.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reminds us netlink_getname() runs locklessly [1]
This first patch annotates the race against nlk->portid.
Following patches take care of the remaining races.
[1]
BUG: KCSAN: data-race in netlink_getname / netlink_insert
write to 0xffff88814176d310 of 4 bytes by task 2315 on cpu 1:
netlink_insert+0xf1/0x9a0 net/netlink/af_netlink.c:583
netlink_autobind+0xae/0x180 net/netlink/af_netlink.c:856
netlink_sendmsg+0x444/0x760 net/netlink/af_netlink.c:1895
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2476
___sys_sendmsg net/socket.c:2530 [inline]
__sys_sendmsg+0x19a/0x230 net/socket.c:2559
__do_sys_sendmsg net/socket.c:2568 [inline]
__se_sys_sendmsg net/socket.c:2566 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2566
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff88814176d310 of 4 bytes by task 2316 on cpu 0:
netlink_getname+0xcd/0x1a0 net/netlink/af_netlink.c:1144
__sys_getsockname+0x11d/0x1b0 net/socket.c:2026
__do_sys_getsockname net/socket.c:2041 [inline]
__se_sys_getsockname net/socket.c:2038 [inline]
__x64_sys_getsockname+0x3e/0x50 net/socket.c:2038
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00000000 -> 0xc9a49780
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 2316 Comm: syz-executor.2 Not tainted 6.2.0-rc3-syzkaller-00030-ge8f60cd7db24-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "eport" variable needs to be initialized to NULL for this code to
work.
Fixes: 814e7693207f ("net: microchip: vcap api: Add a storage state to a VCAP rule")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/Y8qbYAb+YSXo1DgR@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If mdiobus_get_phy() is called with an invalid addr parameter, then the
caller has a bug. Print a call trace to help identifying the caller.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/daec3f08-6192-ba79-f74b-5beb436cab6c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.3
First set of patches for v6.3. The most important change here is that
the old Wireless Extension user space interface is not supported on
Wi-Fi 7 devices at all. We also added a warning if anyone with modern
drivers (ie. cfg80211 and mac80211 drivers) tries to use Wireless
Extensions, everyone should switch to using nl80211 interface instead.
Static WEP support is removed, there wasn't any driver using that
anyway so there's no user impact. Otherwise it's smaller features and
fixes as usual.
Note: As mt76 had tricky conflicts due to the fixes in wireless tree,
we decided to merge wireless into wireless-next to solve them easily.
There should not be any merge problems anymore.
Major changes:
cfg80211
- remove never used static WEP support
- warn if Wireless Extention interface is used with cfg80211/mac80211 drivers
- stop supporting Wireless Extensions with Wi-Fi 7 devices
- support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting
rfkill
- add GPIO DT support
bitfield
- add FIELD_PREP_CONST()
mt76
- per-PHY LED support
rtw89
- support new Bluetooth co-existance version
rtl8xxxu
- support RTL8188EU
* tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (123 commits)
wifi: wireless: deny wireless extensions on MLO-capable devices
wifi: wireless: warn on most wireless extension usage
wifi: mac80211: drop extra 'e' from ieeee80211... name
wifi: cfg80211: Deduplicate certificate loading
bitfield: add FIELD_PREP_CONST()
wifi: mac80211: add kernel-doc for EHT structure
mac80211: support minimal EHT rate reporting on RX
wifi: mac80211: Add HE MU-MIMO related flags in ieee80211_bss_conf
wifi: mac80211: Add VHT MU-MIMO related flags in ieee80211_bss_conf
wifi: cfg80211: Use MLD address to indicate MLD STA disconnection
wifi: cfg80211: Support 32 bytes KCK key in GTK rekey offload
wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data()
wifi: cfg80211: remove support for static WEP
wifi: rtl8xxxu: Dump the efuse only for untested devices
wifi: rtl8xxxu: Print the ROM version too
wifi: rtw88: Use non-atomic sta iterator in rtw_ra_mask_info_update()
wifi: rtw88: Use rtw_iterate_vifs() for rtw_vif_watch_dog_iter()
wifi: rtw88: Move register access from rtw_bf_assoc() outside the RCU
wifi: rtl8xxxu: Use a longer retry limit of 48
wifi: rtl8xxxu: Report the RSSI to the firmware
...
====================
Link: https://lore.kernel.org/r/20230123103338.330CBC433EF@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The AX88796C device node on SPI bus can use SPI peripheral properties in
certain configurations:
exynos3250-artik5-eval.dtb: ethernet@0: 'controller-data' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230120144329.305655-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit 72653ae5303c ("selftests: net: tcp_mmap:
Use huge pages in send path") I made a change to use hugepages
for the buffer used by the client (tx path)
Today, I understood that the cause for poor zerocopy
performance was that after a mmap() for a 512KB memory
zone, kernel uses a single zeropage, mapped 128 times.
This was really the reason for poor tx path performance
in zero copy mode, because this zero page refcount is
under high pressure, especially when TCP ACK packets
are processed on another cpu.
We need either to force a COW on all the memory range,
or use MAP_POPULATE so that a zero page is not abused.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230120181136.3764521-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|