summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-04-30ALSA: hda/realtek: Fix built-mic regression on other ASUS modelsTakashi Iwai
A few ASUS models use the ALC256_FIXUP_ASUS_HEADSET_MODE although they have no built-in mic pin on NID 0x13, as found in the commit c1732ede5e80 ("ALSA: hda/realtek - Fix headset and mic on several Asus laptops with ALC256"). This was relatively harmless in the past as NID 0x13 was assigned as the secondary mic. But since the fix for the pin sort order, this pin became the primary one, hence user started noticing the broken input, and we've fixed already for a few ASUS models to switch to ALC256_FIXUP_ASUS_MIC_NO_PRESENCE. This patch corrects the other ASUS models to use the right quirk entry for fixing the built-in mic regression. Here we cover X541SA (1043:12e0), X541UV (1043:12f0), Z550SA (1043:13bf0) and X555UB (1043:1ccd). Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort") Link: https://bugzilla.kernel.org/show_bug.cgi?id=220058 Link: https://patch.msgid.link/20250430053210.31776-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-29ALSA: usb-audio: Fix duplicated name in MIDI substream namesTakashi Iwai
The MIDI substream name string is constructed from the combination of the card shortname (which is taken from USB iProduct) and the USB iJack. The problem is that some devices put the product name to the iJack field, too. For example, aplaymidi -l output on the Lanchkey MK 49 are like: % aplaymidi -l Port Client name Port name 44:0 Launchkey MK4 49 Launchkey MK4 49 Launchkey MK4 44:1 Launchkey MK4 49 Launchkey MK4 49 Launchkey MK4 where the actual iJack name can't be seen because it's truncated due to the doubly words. For resolving those situations, this patch compares the iJack string with the card shortname, and drops if both start with the same words. Then the result becomes like: % aplaymidi -l Port Client name Port name 40:0 Launchkey MK4 49 Launchkey MK4 49 MIDI In 40:1 Launchkey MK4 49 Launchkey MK4 49 DAW In A caveat is that there are some pre-defined names for certain devices in the driver code, and this workaround shouldn't be applied to them. Similarly, when the iJack isn't specified, we should skip this check, too. The patch added those checks in addition to the string comparison. Suggested-by: Paul Davis <paul@linuxaudiosystems.com> Tested-by: Paul Davis <paul@linuxaudiosystems.com> Link: https://lore.kernel.org/CAFa_cKmEDQWcJatbYWi6A58Zg4Ma9_6Nr3k5LhqwyxC-P_kXtw@mail.gmail.com Link: https://patch.msgid.link/20250429183626.20773-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-29ALSA: ump: Fix buffer overflow at UMP SysEx message conversionTakashi Iwai
The conversion function from MIDI 1.0 to UMP packet contains an internal buffer to keep the incoming MIDI bytes, and its size is 4, as it was supposed to be the max size for a MIDI1 UMP packet data. However, the implementation overlooked that SysEx is handled in a different format, and it can be up to 6 bytes, as found in do_convert_to_ump(). It leads eventually to a buffer overflow, and may corrupt the memory when a longer SysEx message is received. The fix is simply to extend the buffer size to 6 to fit with the SysEx UMP message. Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support") Reported-by: Argusee <vr@darknavy.com> Link: https://patch.msgid.link/20250429124845.25128-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-28ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headsetJoachim Priesner
There seem to be multiple USB device IDs used for these; the one I have reports as 0b0e:030c when powered on. (When powered off, it reports as 0b0e:0311.) Signed-off-by: Joachim Priesner <joachim.priesner@web.de> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20250428053606.9237-1-joachim.priesner@web.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-27ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxxTakashi Iwai
HP Spectre x360 15-df1xxx with SSID 13c:863e requires similar workarounds that were applied to another HP Spectre x360 models; it has a mute LED only, no micmute LEDs, and needs the speaker GPIO seup. Link: https://bugzilla.kernel.org/show_bug.cgi?id=220054 Link: https://patch.msgid.link/20250427081035.11567-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-27ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIOChris Chiu
This hardware has ALC274 codec with speaker NID 0x17 and line out NID 0x16 for audio output. The line out is routed correctly but the speaker is not. Thus the volume can't be controlled. This patch removes DAC NID 0x06 (without volume control) from the connection list for speaker NID 0x17. Routing both speaker and line out pins to DAC NID 0x02 which controls the output volume. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Link: https://patch.msgid.link/20250425103618.534951-1-chris.chiu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-20ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()Geoffrey D. Bennett
During initialisation of Focusrite USB audio interfaces, -EPROTO is sometimes returned from usb_set_interface(), which sometimes prevents the device from working: subsequent usb_set_interface() and uac_clock_source_is_valid() calls fail. This patch adds up to 5 retries in endpoint_set_interface(), with a delay starting at 5ms and doubling each time. 5 retries was chosen to allow for longer than expected waits for the interface to start responding correctly; in testing, a single 5ms delay was sufficient to fix the issue. Closes: https://github.com/geoffreybennett/fcp-support/issues/2 Cc: stable@vger.kernel.org Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://patch.msgid.link/Z//7s9dKsmVxHzY2@m.b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-20ALSA: hda/realtek - Enable speaker for HP platformKailang Yang
The speaker doesn't mute when plugged headphone. This platform support 4ch speakers. The speaker pin 0x14 wasn't fill verb table. After assigned model ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX. The speaker can mute when headphone was plugged. Fixes: aa8e3ef4fe53 ("ALSA: hda/realtek: Add quirks for various HP ENVY models") Signed-off-by: Kailang Yang <kailang@realtek.com> Link: https://lore.kernel.org/eb4c14a4d85740069c909e756bbacb0e@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-11Merge tag 'asoc-fix-v6.15-rc1' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.15 A set of small fixes, quirks and device ID additions that came in since -rc1, none of them super stand out. There's also a change to Srini's email address in MAINTAINERS.
2025-04-11MAINTAINERS: update my email addressMark Brown
Merge series from srinivas.kandagatla@linaro.org: Update .mailmap and MAINTAINERS to point to the @kernel.org instead of the @linaro.org. Linaro address will stop working in few days.
2025-04-10firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw versionRichard Fitzgerald
Call cs_dsp_mock_xm_header_get_fw_version() to get the firmware version from the dummy XM header data in cs_dsp_bin_err_test_common_init(). Make the same change to cs_dsp_bin_test_common_init() and remove the cs_dsp_mock_xm_header_get_fw_version_from_regmap() function. The code in cs_dsp_test_bin.c was correctly calling cs_dsp_mock_xm_header_get_fw_version_from_regmap() to fetch the fw version from a dummy header it wrote to XM registers. However in cs_dsp_test_bin_error.c the test doesn't stuff a dummy header into XM, it populates it the normal way using a wmfw file. It should have called cs_dsp_mock_xm_header_get_fw_version() to get the data from its blob buffer, but was calling cs_dsp_mock_xm_header_get_fw_version_from_regmap(). As nothing had been written to the registers this returned the value of uninitialized data. The only other use of cs_dsp_mock_xm_header_get_fw_version_from_regmap() was cs_dsp_test_bin.c, but it doesn't need to use it. It already has a blob buffer containing the dummy XM header so it can use cs_dsp_mock_xm_header_get_fw_version() to read from that. Fixes: cd8c058499b6 ("firmware: cs_dsp: Add KUnit testing of bin error cases") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20250410132129.1312541-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-10ASoC: codecs: Add of_match_table for aw888081 driverWeidong Wang
Add of_match_table for aw88081 driver to make matching between dts and driver more flexible Signed-off-by: Weidong Wang <wangweidong.a@awinic.com> Link: https://patch.msgid.link/20250410024953.26565-1-wangweidong.a@awinic.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-10ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START eventHerve Codina
On SNDRV_PCM_TRIGGER_START event, audio data pointers are not reset. This leads to wrong data buffer usage when multiple TRIGGER_START are received and ends to incorrect buffer usage between the user-space and the driver. Indeed, the driver can read data that are not already set by the user-space or the user-space and the driver are writing and reading the same area. Fix that resetting data pointers on each SNDRV_PCM_TRIGGER_START events. Fixes: 075c7125b11c ("ASoC: fsl: Add support for QMC audio") Cc: stable@vger.kernel.org Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://patch.msgid.link/20250410091643.535627-1-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-10mailmap: Add entry for Srinivas KandagatlaSrinivas Kandagatla
Add entries for the various addresses that I have been using over the years and remap all of them to kernel.org alias. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://patch.msgid.link/20250410103713.24875-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-10MAINTAINERS: use kernel.org aliasSrinivas Kandagatla
My Linaro email will stop working soon. Use @kernel.org email instead. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://patch.msgid.link/20250410103713.24875-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-09ASoC: cs42l43: Reset clamp override on jack removalCharles Keepax
Some of the manually selected jack configurations will disable the headphone clamp override. Restore this on jack removal, such that the state is consistent for a new insert. Fixes: fc918cbe874e ("ASoC: cs42l43: Add support for the cs42l43") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250409120717.1294528-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-09ALSA: hda/realtek - Fixed ASUS platform headset Mic issueKailang Yang
ASUS platform Headset Mic was disable by default. Assigned verb table for Mic pin will enable it. Fixes: 7ab61d0a9a35 ("ALSA: hda/realtek: Add support for ASUS B3405 and B3605 Laptops using CS35L41 HDA") Fixes: c86dd79a7c33 ("ALSA: hda/realtek: Add support for ASUS B5405 and B5605 Laptops using CS35L41 HDA") Signed-off-by: Kailang Yang <kailang@realtek.com> Link: https://lore.kernel.org/0fe3421a6850461fb0b7012cb28ef71d@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-09ALSA: hda/cirrus_scodec_test: Don't select dependenciesRichard Fitzgerald
Depend on SND_HDA_CIRRUS_SCODEC and GPIOLIB instead of selecting them. KUNIT_ALL_TESTS should only build tests that have satisfied dependencies and test components that are already being built. It must not cause other stuff to be added to the build. Fixes: 2144833e7b41 ("ALSA: hda: cirrus_scodec: Add KUnit test") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20250409114520.914079-1-rf@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-08ALSA: azt2320: Replace deprecated strcpy() with strscpy()Thorsten Blum
strcpy() is deprecated, use strscpy() instead. Link: https://github.com/KSPP/linux/issues/88 Cc: linux-hardening@vger.kernel.org Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://patch.msgid.link/20250407090832.743255-1-thorsten.blum@linux.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-08ASoC: codecs: lpass-wsa: fix VI capture setup.Mark Brown
Merge series from srinivas.kandagatla@linaro.org: This two patches fixes below two issues with the VI setup. 1. Only one channel gets enabled on VI feedback patch instead of two channels 2. recording rate is hardcoded to 8K instead dyamically setting it up. Both of these issues are fixed in these patches.
2025-04-08ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entryKuninori Morimoto
commit 0ecd24a6d8b2 ("ASoC: hdmi-codec: dump ELD through procfs") adds "eld#%d" entry for sound proc. It is using DAI ID. But it is possible to have duplicate DAI ID on same Sound Card. In such case, we will get below error. To avoid duplicate entry name, use RTD ID instead of DAI ID. proc_dir_entry 'card0/eld#0' already registered WARNING: CPU: 3 PID: 74 at fs/proc/generic.c:377 proc_register+0x11c/0x1a4 Modules linked in: CPU: 3 UID: 0 PID: 74 Comm: kworker/u33:5 Not tainted 6.14.0-rc1-next-20250206-arm64-renesas #174 Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : proc_register+0x11c/0x1a4 ata1: SATA link down (SStatus 0 SControl 300) lr : proc_register+0x11c/0x1a4 sp : ffff8000847db880 x29: ffff8000847db880 x28: 0000000000000000 x27: ffff0004c3403c98 x26: 0000000000000005 x25: ffff0004c14b03e4 x24: 0000000000000005 x23: ffff0004c361adb8 x22: ffff800082f24860 x21: ffff0004c361ad00 x20: ffff0004c14b0300 x19: ffff0004c14b02c0 x18: 00000000ffffffff x17: 0000000000000000 x16: 00400034b5503510 x15: ffff8001047db447 x14: 0000000000000000 x13: 6465726574736967 x12: ffff800082e66d30 x11: 000000000000028e x10: ffff800082e66d30 x9 : 00000000ffffefff x8 : ffff800082ebed30 x7 : 0000000000017fe8 x6 : 0000000000000000 x5 : 80000000fffff000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0004c15b3600 Call trace: proc_register+0x11c/0x1a4 (P) proc_create_data+0x3c/0x60 snd_info_register+0xd0/0x130 snd_info_register+0x30/0x130 snd_info_card_register+0x1c/0xbc snd_card_register+0x194/0x1ec snd_soc_bind_card+0x7f8/0xad0 snd_soc_register_card+0xe8/0xfc devm_snd_soc_register_card+0x48/0x98 audio_graph_parse_of+0x1c4/0x1f8 graph_probe+0x6c/0x80 ... Fixes: 0ecd24a6d8b2 ("ASoC: hdmi-codec: dump ELD through procfs") Reported-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn> Acked-by: Mark Brown <broonie@kernel.org> Link: https://patch.msgid.link/87a58roatw.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-08ASoC: Intel: avs: Constrain path based on BE capabilitiesAmadeusz Sławiński
For i2s and DMIC copiers constraint stream capabilities based on available NHLT configuration. This allows topology to provide generic configuration that handles more hardware, while filtering unavailable ones at runtime. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://patch.msgid.link/20250407130851.1726800-1-amadeuszx.slawinski@linux.intel.com Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-07ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware()Chen Ni
release_firmware() checks for NULL pointers internally. Remove unneeded NULL check for fmw here. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250407061939.2771803-1-nichen@iscas.ac.cn Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-04-06ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()Henry Martin
devm_kasprintf() returns NULL when memory allocation fails. Currently, avs_component_probe() does not check for this case, which results in a NULL pointer dereference. Fixes: 739c031110da ("ASoC: Intel: avs: Provide support for fallback topology") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://patch.msgid.link/20250402141411.44972-1-bsdhenrymartin@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-06ASoC: fsl_asrc_dma: get codec or cpu dai from backendShengjiu Wang
With audio graph card, original cpu dai is changed to codec device in backend, so if cpu dai is dummy device in backend, get the codec dai device, which is the real hardware device connected. The specific case is ASRC->SAI->AMIX->CODEC. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://patch.msgid.link/20250319033504.2898605-1-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-06ASoC: qcom: Fix sc7280 lpass potential buffer overflowEvgeny Pimenov
Case values introduced in commit 5f78e1fb7a3e ("ASoC: qcom: Add driver support for audioreach solution") cause out of bounds access in arrays of sc7280 driver data (e.g. in case of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()). Redefine LPASS_MAX_PORTS to consider the maximum possible port id for q6dsp as sc7280 driver utilizes some of those values. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 77d0ffef793d ("ASoC: qcom: Add macro for lpass DAI id's max limit") Cc: stable@vger.kernel.org # v6.0+ Suggested-by: Mikhail Kobuk <m.kobuk@ispras.ru> Suggested-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Evgeny Pimenov <pimenoveu12@gmail.com> Link: https://patch.msgid.link/20250401204058.32261-1-pimenoveu12@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-06ASoC: dwc: always enable/disable i2s irqsBrady Norander
Commit a42e988 ("ASoC: dwc: add DMA handshake control") changed the behavior of the driver to not enable or disable i2s irqs if using DMA. This breaks platforms such as AMD ACP. Audio playback appears to work but no audio can be heard. Revert to the old behavior by always enabling and disabling i2s irqs while keeping DMA handshake control. Fixes: a42e988b626 ("ASoC: dwc: add DMA handshake control") Signed-off-by: Brady Norander <bradynorander@gmail.com> Link: https://patch.msgid.link/20250330130852.37881-3-bradynorander@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-06ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16Peter Ujfalusi
Asus laptops with sound PCI subsystem ID 1043:1f43 have the DMICs connected to the host instead of the CS42L43 so need the SOC_SDW_CODEC_MIC quirk. Link: https://github.com/thesofproject/sof/issues/9930 Fixes: 084344970808 ("ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S14") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250404133213.4658-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-06ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channelsSrinivas Kandagatla
Existing code only configures one of WSA_MACRO_TX0 or WSA_MACRO_TX1 paths eventhough we enable both of them. Fix this bug by adding proper checks and rearranging some of the common code to able to allow setting both TX0 and TX1 paths Without this patch only one channel gets enabled in VI path instead of 2 channels. End result would be 1 channel recording instead of 2. Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route") Cc: stable@vger.kernel.org Co-developed-by: Manikantan R <quic_manrav@quicinc.com> Signed-off-by: Manikantan R <quic_manrav@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://patch.msgid.link/20250403160209.21613-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-06ASoC: codecs:lpass-wsa-macro: Fix vi feedback rateSrinivas Kandagatla
Currently the VI feedback rate is set to fixed 8K, fix this by getting the correct rate from params_rate. Without this patch incorrect rate will be set on the VI feedback recording resulting in rate miss match and audio artifacts. Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route") Cc: stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://patch.msgid.link/20250403160209.21613-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-06Linux 6.15-rc1v6.15-rc1Linus Torvalds
2025-04-06tools/include: make uapi/linux/types.h usable from assemblyThomas Weißschuh
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when included from assembly code. Mirror this behaviour in the tools/ variant. Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the toolchain automatically. Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/ Fixes: c9fbaa879508 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-04-06Merge tag 'turbostat-2025.05.06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - support up to 8192 processors - add cpuidle governor debug telemetry, disabled by default - update default output to exclude cpuidle invocation counts - bug fixes * tag 'turbostat-2025.05.06' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: v2025.05.06 tools/power turbostat: disable "cpuidle" invocation counters, by default tools/power turbostat: re-factor sysfs code tools/power turbostat: Restore GFX sysfs fflush() call tools/power turbostat: Document GNR UncMHz domain convention tools/power turbostat: report CoreThr per measurement interval tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192 tools/power turbostat: Add idle governor statistics reporting tools/power turbostat: Fix names matching tools/power turbostat: Allow Zero return value for some RAPL registers tools/power turbostat: Clustered Uncore MHz counters should honor show/hide options
2025-04-06Merge tag 'soundwire-6.15-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fix from Vinod Koul: - add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT * tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
2025-04-06tools/power turbostat: v2025.05.06Len Brown
Support up to 8192 processors Add cpuidle governor debug telemetry, disabled by default Update default output to exclude cpuidle invocation counts Bug fixes Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: disable "cpuidle" invocation counters, by defaultLen Brown
Create "pct_idle" counter group, the sofware notion of residency so it can now be singled out, independent of other counter groups. Create "cpuidle" group, the cpuidle invocation counts. Disable "cpuidle", by default. Create "swidle" = "cpuidle" + "pct_idle". Undocument "sysfs", the old name for "swidle", but keep it working for backwards compatibilty. Create "hwidle", all the HW idle counters Modify "idle", enabled by default "idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle") Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06Merge tag 'perf-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Ingo Molnar: "Fix a perf events time accounting bug" * tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix child_total_time_enabled accounting bug at task exit
2025-04-06Merge tag 'sched-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: - Fix a nonsensical Kconfig combination - Remove an unnecessary rseq-notification * tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq: Eliminate useless task_work on execve sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
2025-04-06Disable SLUB_TINY for build testingLinus Torvalds
... and don't error out so hard on missing module descriptions. Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") we used to warn about missing module descriptions, but only when building with extra warnigns (ie 'W=1'). After that commit the warning became an unconditional hard error. And it turns out not all modules have been converted despite the claims to the contrary. As reported by Damian Tometzki, the slub KUnit test didn't have a module description, and apparently nobody ever really noticed. The reason nobody noticed seems to be that the slub KUnit tests get disabled by SLUB_TINY, which also ends up disabling a lot of other code, both in tests and in slub itself. And so anybody doing full build tests didn't actually see this failre. So let's disable SLUB_TINY for build-only tests, since it clearly ends up limiting build coverage. Also turn the missing module descriptions error back into a warning, but let's keep it around for non-'W=1' builds. Reported-by: Damian Tometzki <damian@riscv-rocks.de> Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/ Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Fixes: 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-04-06tools/power turbostat: re-factor sysfs codeLen Brown
Probe cpuidle "sysfs" residency and counts separately, since soon we will make one disabled on, and the other disabled off. Clarify that some BIC (build-in-counters) are actually "groups". since we're about to re-name some of those groups. no functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: Restore GFX sysfs fflush() callZhang Rui
Do fflush() to discard the buffered data, before each read of the graphics sysfs knobs. Fixes: ba99a4fc8c24 ("tools/power turbostat: Remove unnecessary fflush() call") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: Document GNR UncMHz domain conventionLen Brown
Document that on Intel Granite Rapids Systems, Uncore domains 0-2 are CPU domains, and uncore domains 3-4 are IO domains. Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06tools/power turbostat: report CoreThr per measurement intervalLen Brown
The CoreThr column displays total thermal throttling events since boot time. Change it to report events during the measurement interval. This is more useful for showing a user the current conditions. Total events since boot time are still available to the user via /sys/devices/system/cpu/cpu*/thermal_throttle/* Document CoreThr on turbostat.8 Fixes: eae97e053fe30 ("turbostat: Support thermal throttle count print") Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: Chen Yu <yu.c.chen@intel.com>
2025-04-06tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192Justin Ernst
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output: "turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151" A similar error appears with the use of turbostat --cpu when the inputted cpu range contains a cpu number >= 1024: # turbostat -c 1100-1151 "--cpu 1100-1151" malformed ... Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS. It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low. For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS brings support for parsing cpu numbers >= 1024. Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64. Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-04-06Merge tag 'timers-cleanups-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A set of final cleanups for the timer subsystem: - Convert all del_timer[_sync]() instances over to the new timer_delete[_sync]() API and remove the legacy wrappers. Conversion was done with coccinelle plus some manual fixups as coccinelle chokes on scoped_guard(). - The final cleanup of the hrtimer_init() to hrtimer_setup() conversion. This has been delayed to the end of the merge window, so that all patches which have been merged through other trees are in mainline and all new users are catched. Doing this right before rc1 ensures that new code which is merged post rc1 is not introducing new instances of the original functionality" * tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing/timers: Rename the hrtimer_init event to hrtimer_setup hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack() hrtimers: Rename debug_init() to debug_setup() hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper() hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns() hrtimers: Make callback function pointer private hrtimers: Merge __hrtimer_init() into __hrtimer_setup() hrtimers: Switch to use __htimer_setup() hrtimers: Delete hrtimer_init() treewide: Convert new and leftover hrtimer_init() users treewide: Switch/rename to timer_delete[_sync]()
2025-04-06Merge tag 'irq-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more irq updates from Thomas Gleixner: "A set of updates for the interrupt subsystem: - A treewide cleanup for the irq_domain code, which makes the naming consistent and gets rid of the original oddity of naming domains 'host'. This is a trivial mechanical change and is done late to ensure that all instances have been catched and new code merged post rc1 wont reintroduce new instances. - A trivial consistency fix in the migration code The recent introduction of irq_force_complete_move() in the core code, causes a problem for the nostalgia crowd who maintains ia64 out of tree. The code assumes that hierarchical interrupt domains are enabled and dereferences irq_data::parent_data unconditionally. That works in mainline because both architectures which enable that code have hierarchical domains enabled. Though it breaks the ia64 build, which enables the functionality, but does not have hierarchical domains. While it's not really a problem for mainline today, this unconditional dereference is inconsistent and trivially fixable by using the existing helper function irqd_get_parent_data(), which has the appropriate #ifdeffery in place" * tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move() irqdomain: Stop using 'host' for domain irqdomain: Rename irq_get_default_host() to irq_get_default_domain() irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
2025-04-06Merge tag 'timers-urgent-2025-04-06' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A revert to fix a adjtimex() regression: The recent change to prevent that time goes backwards for the coarse time getters due to immediate multiplier adjustments via adjtimex(), changed the way how the timekeeping core treats that. That change result in a regression on the adjtimex() side, which is user space visible: 1) The forwarding of the base time moves the update out of the original period and establishes a new one. That's changing the behaviour of the [PF]LL control, which user space expects to be applied periodically. 2) The clearing of the accumulated NTP error due to #1, changes the behaviour as well. An attempt to delay the multiplier/frequency update to the next tick did not solve the problem as userspace expects that the multiplier or frequency updates are in effect, when the syscall returns. There is a different solution for the coarse time problem available, so revert the offending commit to restore the existing adjtimex() behaviour" * tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
2025-04-06Merge tag 'sh-for-v6.15-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "One important fix and one small configuration update. The first patch by Artur Rojek fixes an issue with the J2 firmware loader not being able to find the location of the device tree blob due to insufficient alignment of the .bss section which rendered J2 boards unbootable. The second patch by Johan Korsnes updates the defconfigs on sh to drop the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete after 8c710f75256b ("net/sched: Retire tcindex classifier"). Summary: - sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX - sh: Align .bss section padding to 8-byte boundary" * tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX sh: Align .bss section padding to 8-byte boundary
2025-04-05Merge tag 'kbuild-v6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Improve performance in gendwarfksyms - Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS - Support CONFIG_HEADERS_INSTALL for ARCH=um - Use more relative paths to sources files for better reproducibility - Support the loong64 Debian architecture - Add Kbuild bash completion - Introduce intermediate vmlinux.unstripped for architectures that need static relocations to be stripped from the final vmlinux - Fix versioning in Debian packages for -rc releases - Treat missing MODULE_DESCRIPTION() as an error - Convert Nios2 Makefiles to use the generic rule for built-in DTB - Add debuginfo support to the RPM package * tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits) kbuild: rpm-pkg: build a debuginfo RPM kconfig: merge_config: use an empty file as initfile nios2: migrate to the generic rule for built-in DTB rust: kbuild: skip `--remap-path-prefix` for `rustdoc` kbuild: pacman-pkg: hardcode module installation path kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally modpost: require a MODULE_DESCRIPTION() kbuild: make all file references relative to source root x86: drop unnecessary prefix map configuration kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS kbuild: Add a help message for "headers" kbuild: deb-pkg: remove "version" variable in mkdebian kbuild: deb-pkg: fix versioning for -rc releases Documentation/kbuild: Fix indentation in modules.rst example x86: Get rid of Makefile.postlink kbuild: Create intermediate vmlinux build with relocations preserved kbuild: Introduce Kconfig symbol for linking vmlinux with relocations kbuild: link-vmlinux.sh: Make output file name configurable kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y Revert "kheaders: Ignore silly-rename files" ...
2025-04-05Merge tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes, mostly from the end of last week, this week was very quiet, maybe you scared everyone away. It's mostly amdgpu, and xe, with some i915, adp and bridge bits, since I think this is overly quiet I'd expect rc2 to be a bit more lively. bridge: - tda998x: Select CONFIG_DRM_KMS_HELPER amdgpu: - Guard against potential division by 0 in fan code - Zero RPM support for SMU 14.0.2 - Properly handle SI and CIK support being disabled - PSR fixes - DML2 fixes - DP Link training fix - Vblank fixes - RAS fixes - Partitioning fix - SDMA fix - SMU 13.0.x fixes - Rom fetching fix - MES fixes - Queue reset fix xe: - Fix NULL pointer dereference on error path - Add missing HW workaround for BMG - Fix survivability mode not triggering - Fix build warning when DRM_FBDEV_EMULATION is not set i915: - Bounds check for scalers in DSC prefill latency computation - Fix build by adding a missing include adp: - Fix error handling in plane setup" # -----BEGIN PGP SIGNATURE----- * tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel: (34 commits) drm/i2c: tda998x: select CONFIG_DRM_KMS_HELPER drm/amdgpu/gfx12: fix num_mec drm/amdgpu/gfx11: fix num_mec drm/amd/pm: Add gpu_metrics_v1_8 drm/amdgpu: Prefer shadow rom when available drm/amd/pm: Update smu metrics table for smu_v13_0_6 drm/amd/pm: Remove host limit metrics support Remove unnecessary firmware version check for gc v9_4_2 drm/amdgpu: stop unmapping MQD for kernel queues v3 Revert "drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA" drm/amdgpu: Parse all deferred errors with UMC aca handle drm/amdgpu: Update ta ras block drm/amdgpu: Add NPS2 to DPX compatible mode drm/amdgpu: Use correct gfx deferred error count drm/amd/display: Actually do immediate vblank disable drm/amd/display: prevent hang on link training fail Revert "drm/amd/display: dml2 soc dscclk use DPM table clk setting" drm/amd/display: Increase vblank offdelay for PSR panels drm/amd: Handle being compiled without SI or CIK support better drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2 ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 20:25:46 +0000