| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes on top of the previously merged power
management material with the addition of some teo cpuidle governor
updates, some of which may also be regarded as fixes:
- Add missing error handling for syscore_suspend() to the hibernation
core code (Wentao Liang)
- Revert a commit that added unused macros (Andy Shevchenko)
- Synchronize the runtime PM status of devices that were runtime-
suspended before a system-wide suspend and need to be resumed
during the subsequent system-wide resume transition (Rafael
Wysocki)
- Clean up the teo cpuidle governor and make the handling of short
idle intervals in it consistent regardless of the properties of
idle states supplied by the cpuidle driver (Rafael Wysocki)
- Fix some boost-related issues in cpufreq (Lifeng Zheng)
- Fix build issues in the s3c64xx and airoha cpufreq drivers (Viresh
Kumar)
- Remove unconditional binding of schedutil governor kthreads to the
affected CPUs if the cpufreq driver indicates that updates can
happen from any CPU (Christian Loehle)"
* tag 'pm-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Synchronize runtime PM status of parents and children
cpufreq: airoha: Depends on OF
PM: Revert "Add EXPORT macros for exporting PM functions"
PM: hibernate: Add error handling for syscore_suspend()
cpufreq/schedutil: Only bind threads if needed
cpufreq: ACPI: Remove set_boost in acpi_cpufreq_cpu_init()
cpufreq: CPPC: Fix wrong max_freq in policy initialization
cpufreq: Introduce a more generic way to set default per-policy boost flag
cpufreq: Fix re-boost issue after hotplugging a CPU
cpufreq: s3c64xx: Fix compilation warning
cpuidle: teo: Skip sleep length computation for low latency constraints
cpuidle: teo: Replace time_span_ns with a flag
cpuidle: teo: Simplify handling of total events count
cpuidle: teo: Skip getting the sleep length if wakeups are very frequent
cpuidle: teo: Simplify counting events used for tick management
cpuidle: teo: Clarify two code comments
cpuidle: teo: Drop local variable prev_intercept_idx
cpuidle: teo: Combine candidate state index checks against 0
cpuidle: teo: Reorder candidate state index checks
cpuidle: teo: Rearrange idle state lookup code
|
|
Merge fixes related to system sleep for 6.14-rc1:
- Add missing error handling for syscore_suspend() to the hibernation
core code (Wentao Liang).
- Revert a commit that added unused macros (Andy Shevchenko).
- Synchronize the runtime PM status of devices that were runtime-
suspended before a system-wide suspend and need to be resumed during
the subsequent syste-wide resume transition (Rafael Wysocki).
* pm-sleep:
PM: sleep: core: Synchronize runtime PM status of parents and children
PM: Revert "Add EXPORT macros for exporting PM functions"
PM: hibernate: Add error handling for syscore_suspend()
|
|
Merge updates of the teo cpuidle governor for 6.14-rc1 that clean it
up and make the handling of short idle intervals in it consistent
regardless of the properties of idle states supplied by the cpuidle
driver.
* pm-cpuidle:
cpuidle: teo: Skip sleep length computation for low latency constraints
cpuidle: teo: Replace time_span_ns with a flag
cpuidle: teo: Simplify handling of total events count
cpuidle: teo: Skip getting the sleep length if wakeups are very frequent
cpuidle: teo: Simplify counting events used for tick management
cpuidle: teo: Clarify two code comments
cpuidle: teo: Drop local variable prev_intercept_idx
cpuidle: teo: Combine candidate state index checks against 0
cpuidle: teo: Reorder candidate state index checks
cpuidle: teo: Rearrange idle state lookup code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPSec, netfilter and Bluetooth.
Nothing really stands out, but as usual there's a slight concentration
of fixes for issues added in the last two weeks before the merge
window, and driver bugs from 6.13 which tend to get discovered upon
wider distribution.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects netdev
state with a mutex now
Previous releases - regressions:
- eth:
- mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- bgmac: reduce max frame size to support just 1500 bytes; the
jumbo frame support would previously cause OOB writes, but now
fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid
false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm:
- make sure skb->sk is a full sock before accessing its fields
- fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path"
* tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
MAINTAINERS: add Neal to TCP maintainers
net: revert RTNL changes in unregister_netdevice_many_notify()
net: hsr: fix fill_frame_info() regression vs VLAN packets
doc: mptcp: sysctl: blackhole_timeout is per-netns
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
netfilter: nf_tables: reject mismatching sum of field_len with set key length
net: sh_eth: Fix missing rtnl lock in suspend/resume path
net: ravb: Fix missing rtnl lock in suspend/resume path
selftests/net: Add test for loading devbound XDP program in generic mode
net: xdp: Disallow attaching device-bound programs in generic mode
tcp: correct handling of extreme memory squeeze
bgmac: reduce max frame size to support just MTU 1500
vsock/test: Add test for connect() retries
vsock/test: Add test for UAF due to socket unbinding
vsock/test: Introduce vsock_connect_fd()
vsock/test: Introduce vsock_bind()
vsock: Allow retrying on connect() failure
vsock: Keep the binding until socket destruction
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
...
|
|
Pull documentation fixes from Jonathan Corbet:
"Two fixes for footnote-related warnings that appeared with Sphinx 8.x.
We want to encourage use of newer Sphinx - they fixed a performance
problem and the docs build takes less than half the time it used to"
* tag 'docs-6.14-2' of git://git.lwn.net/linux:
docs: power: Fix footnote reference for Toshiba Satellite P10-554
Documentation: ublk: Drop Stefan Hajnoczi's message footnote
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Architecutre-specific ftrace recursion trylock tests were removed in
favour of the generic function_graph_enter(), but s390 got missed.
Remove this test for s390 as well.
- Add ftrace_get_symaddr() for s390, which returns the symbol address
from ftrace 'ip' parameter
* tag 's390-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/tracing: Define ftrace_get_symaddr() for s390
s390/fgraph: Fix to remove ftrace_test_recursion_trylock()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- The rework that uncoupled physical and virtual address spaces
inadvertently prevented KASAN shadow mappings from using large pages.
Restore large page mappings for KASAN shadows
- Add decompressor routine physmem_alloc() that may fail, unlike
physmem_alloc_or_die(). This allows callers to implement fallback
paths
- Allow falling back from large pages to smaller pages (1MB or 4KB) if
the allocation of 2GB pages in the decompressor can not be fulfilled
- Add to the decompressor boot print support of "%%" format string,
width and padding hadnling, length modifiers and decimal conversion
specifiers
- Add to the decompressor message severity levels similar to kernel
ones. Support command-line options that control console output
verbosity
- Replaces boot_printk() calls with appropriate loglevel- specific
helpers such as boot_emerg(), boot_warn(), and boot_debug().
- Collect all boot messages into a ring buffer independent of the
current log level. This is particularly useful for early crash
analysis
- If 'earlyprintk' command line parameter is not specified, store
decompressor boot messages in a ring buffer to be printed later by
the kernel, once the console driver is registered
- Add 'bootdebug' command line parameter to enable printing of
decompressor debug messages when needed. That parameters allows
message suppressing and filtering
- Dump boot messages on a decompressor crash, but only if 'bootdebug'
command line parameter is enabled
- When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages
in the same format as regular printk()
- Dump physical memory tracking information on boot: online ranges,
reserved areas and vmem allocations
- Dump virtual memory layout and randomization details
- Improve decompression error reporting and dump the message ring
buffer in case the boot failed and system halted
- Add an exception handler which handles exceptions when FPU control
register is attempted to be set to an invalid value. Remove '.fixup'
section as result of this change
- Use 'A', 'O', and 'R' inline assembly format flags, which allows
recent Clang compilers to generate better FPU code
- Rework uaccess code so it reads better and generates more efficient
code
- Cleanup futex inline assembly code
- Disable KMSAN instrumention for futex inline assemblies, which
contain dereferenced user pointers. Otherwise, shadows for the user
pointers would be accessed
- PFs which are not initially configured but in standby create only a
single-function PCI domain. If they are configured later on, sibling
PFs and their child VFs will not be added to their PCI domain
breaking SR-IOV expectations.
Fix that by allowing initially configured but in standby PFs create
multi-function PCI domains
- Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid
compile errors caused by kernel's own definitions of 'bool', 'false',
and 'true' conflicting with the C23 reserved keywords
- Fix sclp subsystem failure when a sclp console is not present
- Fix misuse of non-NULL terminated strings in vmlogrdr driver
- Various other small improvements, cleanups and fixes
* tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits)
s390/vmlogrdr: Use array instead of string initializer
s390/vmlogrdr: Use internal_name for error messages
s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init()
s390/tools: Use array instead of string initializer
s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init()
s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS
s390/bitops: Use correct constraint for arch_test_bit() inline assembly
s390/pci: Fix SR-IOV for PFs initially in standby
s390/futex: Avoid KMSAN instrumention for user pointers
s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inline
s390/futex: Cleanup futex_atomic_cmpxchg_inatomic()
s390/futex: Generate futex atomic op functions
s390/uaccess: Remove INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER
s390/uaccess: Use asm goto for put_user()/get_user()
s390/uaccess: Remove usage of the oac specifier
s390/uaccess: Replace EX_TABLE_UA_LOAD_MEM exception handling
s390/uaccess: Cleanup noinstr __put_user()/__get_user() inline assembly constraints
s390/uaccess: Remove __put_user_fn()/__get_user_fn() wrappers
s390/uaccess: Move put_user() / __put_user() close to put_user() asm code
s390/uaccess: Use asm goto for __mvc_kernel_nofault()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- update gpio-sim selftests to not fail now that we no longer allow
rmdir() on configfs entries of active devices
- remove leftover code from gpio-mxc
* tag 'gpio-fixes-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
selftests: gpio: gpio-sim: Fix missing chip disablements
gpio: mxc: remove dead code after switch to DT-only
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs d_revalidate updates from Al Viro:
"Provide stable parent and name to ->d_revalidate() instances
Most of the filesystem methods where we care about dentry name and
parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for expected name
and expected parent of the dentry being validated. That kills quite a
bit of boilerplate in ->d_revalidate() instances, along with a bunch
of races where they used to access ->d_name without sufficient
precautions"
* tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: fix ->rename_sem exclusion
orangefs_d_revalidate(): use stable parent inode and name passed by caller
ocfs2_dentry_revalidate(): use stable parent inode and name passed by caller
nfs: fix ->d_revalidate() UAF on ->d_name accesses
nfs{,4}_lookup_validate(): use stable parent inode passed by caller
gfs2_drevalidate(): use stable parent inode and name passed by caller
fuse_dentry_revalidate(): use stable parent inode and name passed by caller
vfat_revalidate{,_ci}(): use stable parent inode passed by caller
exfat_d_revalidate(): use stable parent inode passed by caller
fscrypt_d_revalidate(): use stable parent inode passed by caller
ceph_d_revalidate(): propagate stable name down into request encoding
ceph_d_revalidate(): use stable parent inode passed by caller
afs_d_revalidate(): use stable name and parent inode passed by caller
Pass parent directory inode and expected name to ->d_revalidate()
generic_ci_d_compare(): use shortname_storage
ext4 fast_commit: make use of name_snapshot primitives
dissolve external_name.u into separate members
make take_dentry_name_snapshot() lockless
dcache: back inline names with a struct-wrapped array of unsigned long
make sure that DNAME_INLINE_LEN is a multiple of word size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains one Netfilter fix:
1) Reject mismatching sum of field_len with set key length which allows
to create a set without inconsistent pipapo rule width and set key
length.
* tag 'nf-25-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: reject mismatching sum of field_len with set key length
====================
Link: https://patch.msgid.link/20250130113307.2327470-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Neal Cardwell has been indispensable in TCP reviews
and investigations, especially protocol-related.
Neal is also the author of packetdrill.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250129191332.2526140-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch reverts following changes:
83419b61d187 net: reduce RTNL hold duration in unregister_netdevice_many_notify() (part 2)
ae646f1a0bb9 net: reduce RTNL hold duration in unregister_netdevice_many_notify() (part 1)
cfa579f66656 net: no longer hold RTNL while calling flush_all_backlogs()
This caused issues in layers holding a private mutex:
cleanup_net()
rtnl_lock();
mutex_lock(subsystem_mutex);
unregister_netdevice();
rtnl_unlock(); // LOCKDEP violation
rtnl_lock();
I will revisit this in next cycle, opt-in for the new behavior
from safe contexts only.
Fixes: cfa579f66656 ("net: no longer hold RTNL while calling flush_all_backlogs()")
Fixes: ae646f1a0bb9 ("net: reduce RTNL hold duration in unregister_netdevice_many_notify() (part 1)")
Fixes: 83419b61d187 ("net: reduce RTNL hold duration in unregister_netdevice_many_notify() (part 2)")
Reported-by: syzbot+5b9196ecf74447172a9a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6789d55f.050a0220.20d369.004e.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250129142726.747726-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stephan Wurm reported that my recent patch broke VLAN support.
Apparently skb->mac_len is not correct for VLAN traffic as
shown by debug traces [1].
Use instead pskb_may_pull() to make sure the expected header
is present in skb->head.
Many thanks to Stephan for his help.
[1]
kernel: skb len=170 headroom=2 headlen=170 tailroom=20
mac=(2,14) mac_len=14 net=(16,-1) trans=-1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0000 pkttype=0 iif=0
priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0
encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0)
kernel: dev name=prp0 feat=0x0000000000007000
kernel: sk family=17 type=3 proto=0
kernel: skb headroom: 00000000: 74 00
kernel: skb linear: 00000000: 01 0c cd 01 00 01 00 d0 93 53 9c cb 81 00 80 00
kernel: skb linear: 00000010: 88 b8 00 01 00 98 00 00 00 00 61 81 8d 80 16 52
kernel: skb linear: 00000020: 45 47 44 4e 43 54 52 4c 2f 4c 4c 4e 30 24 47 4f
kernel: skb linear: 00000030: 24 47 6f 43 62 81 01 14 82 16 52 45 47 44 4e 43
kernel: skb linear: 00000040: 54 52 4c 2f 4c 4c 4e 30 24 44 73 47 6f 6f 73 65
kernel: skb linear: 00000050: 83 07 47 6f 49 64 65 6e 74 84 08 67 8d f5 93 7e
kernel: skb linear: 00000060: 76 c8 00 85 01 01 86 01 00 87 01 00 88 01 01 89
kernel: skb linear: 00000070: 01 00 8a 01 02 ab 33 a2 15 83 01 00 84 03 03 00
kernel: skb linear: 00000080: 00 91 08 67 8d f5 92 77 4b c6 1f 83 01 00 a2 1a
kernel: skb linear: 00000090: a2 06 85 01 00 83 01 00 84 03 03 00 00 91 08 67
kernel: skb linear: 000000a0: 8d f5 92 77 4b c6 1f 83 01 00
kernel: skb tailroom: 00000000: 80 18 02 00 fe 4e 00 00 01 01 08 0a 4f fd 5e d1
kernel: skb tailroom: 00000010: 4f fd 5e cd
Fixes: b9653d19e556 ("net: hsr: avoid potential out-of-bound access in fill_frame_info()")
Reported-by: Stephan Wurm <stephan.wurm@a-eberle.de>
Tested-by: Stephan Wurm <stephan.wurm@a-eberle.de>
Closes: https://lore.kernel.org/netdev/Z4o_UC0HweBHJ_cw@PC-LX-SteWu/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250129130007.644084-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 15 introduces a regression in "= { 0 }" style initialization of
unions that Linux has depended on for eliminating uninitialized variable
contents. GCC does not seem likely to fix it[1], instead suggesting[2]
that affected projects start using -fzero-init-padding-bits=unions.
To avoid future surprises beyond just the current situation with unions,
enable -fzero-init-padding-bits=all when available (GCC 15+). This will
correctly zero padding bits in unions and structs that might have been
left uninitialized, and will make sure there is no immediate regression
in union initializations. As seen in the stackinit KUnit selftest union
cases, which were passing before, were failing under GCC 15:
not ok 18 test_small_start_old_zero
ok 29 test_small_start_dynamic_partial # SKIP XFAIL uninit bytes: 63
ok 32 test_small_start_assigned_dynamic_partial # SKIP XFAIL uninit bytes: 63
ok 67 test_small_start_static_partial # SKIP XFAIL uninit bytes: 63
ok 70 test_small_start_static_all # SKIP XFAIL uninit bytes: 56
ok 73 test_small_start_dynamic_all # SKIP XFAIL uninit bytes: 56
ok 82 test_small_start_assigned_static_partial # SKIP XFAIL uninit bytes: 63
ok 85 test_small_start_assigned_static_all # SKIP XFAIL uninit bytes: 56
ok 88 test_small_start_assigned_dynamic_all # SKIP XFAIL uninit bytes: 56
The above all now pass again with -fzero-init-padding-bits=all added.
This also fixes the following cases for struct initialization that had
been XFAIL until now because there was no compiler support beyond the
larger "-ftrivial-auto-var-init=zero" option:
ok 38 test_small_hole_static_all # SKIP XFAIL uninit bytes: 3
ok 39 test_big_hole_static_all # SKIP XFAIL uninit bytes: 124
ok 40 test_trailing_hole_static_all # SKIP XFAIL uninit bytes: 7
ok 42 test_small_hole_dynamic_all # SKIP XFAIL uninit bytes: 3
ok 43 test_big_hole_dynamic_all # SKIP XFAIL uninit bytes: 124
ok 44 test_trailing_hole_dynamic_all # SKIP XFAIL uninit bytes: 7
ok 58 test_small_hole_assigned_static_all # SKIP XFAIL uninit bytes: 3
ok 59 test_big_hole_assigned_static_all # SKIP XFAIL uninit bytes: 124
ok 60 test_trailing_hole_assigned_static_all # SKIP XFAIL uninit bytes: 7
ok 62 test_small_hole_assigned_dynamic_all # SKIP XFAIL uninit bytes: 3
ok 63 test_big_hole_assigned_dynamic_all # SKIP XFAIL uninit bytes: 124
ok 64 test_trailing_hole_assigned_dynamic_all # SKIP XFAIL uninit bytes: 7
All of the above now pass when built under GCC 15. Tests can be seen
with:
./tools/testing/kunit/kunit.py run stackinit --arch=x86_64 \
--make_option CC=gcc-15
Clang continues to fully initialize these kinds of variables[3] without
additional flags.
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=118403 [1]
Link: https://lore.kernel.org/linux-toolchains/Z0hRrrNU3Q+ro2T7@tucnak/ [2]
Link: https://github.com/llvm/llvm-project/commit/7a086e1b2dc05f54afae3591614feede727601fa [3]
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20250127191031.245214-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The stack initialization selftests were checking scalars, strings,
and structs, but not unions. Add union tests (which are mostly identical
setup to structs). This catches the recent union initialization behavioral
changes seen in GCC 15. Before GCC 15, this new test passes:
ok 18 test_small_start_old_zero
With GCC 15, it fails:
not ok 18 test_small_start_old_zero
Specifically, a union with a larger member where a smaller member is
initialized with the older "= { 0 }" syntax:
union test_small_start {
char one:1;
char two;
short three;
unsigned long four;
struct big_struct {
unsigned long array[8];
} big;
};
This is a regression in compiler behavior that Linux has depended on.
GCC does not seem likely to fix it, instead suggesting that affected
projects start using -fzero-init-padding-bits=unions:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=118403
Link: https://lore.kernel.org/r/20250127191031.245214-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The deprecated way to do a full zero init of a structure is with "= { 0 }",
but we weren't testing this style. Add it.
Link: https://lore.kernel.org/r/20250127191031.245214-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 fixes from Konstantin Komarov:
- unify inode corruption marking and mark them as bad immediately upon
detection of an error in attribute enumeration
- folio cleanup
* tag 'ntfs3_for_6.14' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Unify inode corruption marking with _ntfs_bad_inode()
fs/ntfs3: Mark inode as bad as soon as error detected in mi_enum_attr()
ntfs3: Remove an access to page->index
|
|
Pull bcachefs fixes from Kent Overstreet:
- second half of a fix for a bug that'd been causing oopses on
filesystems using snapshots with memory pressure (key cache fills for
snaphots btrees are tricky)
- build fix for strange compiler configurations that double stack frame
size
- "journal stuck timeout" now takes into account device latency: this
fixes some spurious warnings, and the main remaining source of SRCU
lock hold time warnings (I'm no longer seeing this in my CI, so any
users still seeing this should definitely ping me)
- fix for slow/hanging unmounts (" Improve journal pin flushing")
- some more tracepoint fixes/improvements, to chase down the "rebalance
isn't making progress" issues
* tag 'bcachefs-2025-01-29' of git://evilpiepirate.org/bcachefs:
bcachefs: Improve trace_move_extent_finish
bcachefs: Fix trace_copygc
bcachefs: Journal writes are now IOPRIO_CLASS_RT
bcachefs: Improve journal pin flushing
bcachefs: fix bch2_btree_node_flags
bcachefs: rebalance, copygc enabled are runtime opts
bcachefs: Improve decompression error messages
bcachefs: bset_blacklisted_journal_seq is now AUTOFIX
bcachefs: "Journal stuck" timeout now takes into account device latency
bcachefs: Reduce stack frame size of __bch2_str_hash_check_key()
bcachefs: Fix btree_trans_peek_key_cache()
|
|
If a socket is shutdown before the connection completes, POLLERR is set
in the poll mask. However, connect ignores this as it doesn't know, and
attempts the connection again. This may lead to a bogus -ETIMEDOUT
result, where it should have noticed the POLLERR and just returned
-ECONNRESET instead.
Have the poll logic check for whether or not POLLERR is set in the mask,
and if so, mark the request as failed. Then connect can appropriately
fail the request rather than retry it.
Reported-by: Sergey Galas <ssgalas@cloud.ru>
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/discussions/1335
Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Matthieu Baerts says:
====================
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
Here are two small fixes for issues introduced in v6.12.
- Patch 1: reset the mpc_drop mark for other SYN retransmits, to only
consider an MPTCP blackhole when the first SYN retransmitted without
the MPTCP options is accepted, as initially intended.
- Patch 2: also mention in the doc that the blackhole_timeout sysctl
knob is per-netns, like all the others.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
====================
Link: https://patch.msgid.link/20250129-net-mptcp-blackhole-fix-v1-0-afe88e5a6d2c@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All other sysctl entries mention it, and it is a per-namespace sysctl.
So mention it as well.
Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Fixes commit mentioned this:
> An MPTCP firewall blackhole can be detected if the following SYN
> retransmission after a fallback to "plain" TCP is accepted.
But in fact, this blackhole was detected if any following SYN
retransmissions after a fallback to TCP was accepted.
That's because 'mptcp_subflow_early_fallback()' will set 'request_mptcp'
to 0, and 'mpc_drop' will never be reset to 0 after.
This is an issue, because some not so unusual situations might cause the
kernel to detect a false-positive blackhole, e.g. a client trying to
connect to a server while the network is not ready yet, causing a few
SYN retransmissions, before reaching the end server.
Fixes: 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It was reported that the headphone output on Dell Venue 11 Pro 7130
becomes mono after PM resume. The cause seems to be the BIOS setting
up the codec COEF 0x0d bit 0x40 wrongly by some reason, and restoring
the original value 0x2800 fixes the problem.
This patch adds the quirk entry to perform the COEF restore.
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219697
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1235686
Link: https://patch.msgid.link/20250130123301.8996-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The field length description provides the length of each separated key
field in the concatenation, each field gets rounded up to 32-bits to
calculate the pipapo rule width from pipapo_init(). The set key length
provides the total size of the key aligned to 32-bits.
Register-based arithmetics still allows for combining mismatching set
key length and field length description, eg. set key length 10 and field
description [ 5, 4 ] leading to pipapo width of 12.
Cc: stable@vger.kernel.org
Fixes: 3ce67e3793f4 ("netfilter: nf_tables: do not allow mismatch field size and set key length")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Kory Maincent says:
====================
Fix missing rtnl lock in suspend path
Fix the suspend path by ensuring the rtnl lock is held where required.
Calls to open, close and WOL operations must be performed under the
rtnl lock to prevent conflicts with ongoing ndo operations.
Discussion about this issue can be found here:
https://lore.kernel.org/netdev/20250120141926.1290763-1-kory.maincent@bootlin.com/
While working on the ravb fix, it was discovered that the sh_eth driver
has the same issue. This patch series addresses both drivers.
I do not have access to hardware for either of these MACs, so it would
be great if maintainers or others with the relevant boards could test
these fixes.
v2: https://lore.kernel.org/r/20250123-fix_missing_rtnl_lock_phy_disconnect-v2-0-e6206f5508ba@bootlin.com
v1: https://lore.kernel.org/r/20250122-fix_missing_rtnl_lock_phy_disconnect-v1-0-8cb9f6f88fd1@bootlin.com
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
====================
Link: https://patch.msgid.link/20250129-fix_missing_rtnl_lock_phy_disconnect-v3-0-24c4ba185a92@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to sh_eth_close, sh_eth_open and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
Fixes: b71af04676e9 ("sh_eth: add more PM methods")
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to ravb_open, ravb_close and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
Without this fix, the following warning is triggered:
[ 39.032969] =============================
[ 39.032983] WARNING: suspicious RCU usage
[ 39.033019] -----------------------------
[ 39.033033] drivers/net/phy/phy_device.c:2004 suspicious
rcu_dereference_protected() usage!
...
[ 39.033597] stack backtrace:
[ 39.033613] CPU: 0 UID: 0 PID: 174 Comm: python3 Not tainted
6.13.0-rc7-next-20250116-arm64-renesas-00002-g35245dfdc62c #7
[ 39.033623] Hardware name: Renesas SMARC EVK version 2 based on
r9a08g045s33 (DT)
[ 39.033628] Call trace:
[ 39.033633] show_stack+0x14/0x1c (C)
[ 39.033652] dump_stack_lvl+0xb4/0xc4
[ 39.033664] dump_stack+0x14/0x1c
[ 39.033671] lockdep_rcu_suspicious+0x16c/0x22c
[ 39.033682] phy_detach+0x160/0x190
[ 39.033694] phy_disconnect+0x40/0x54
[ 39.033703] ravb_close+0x6c/0x1cc
[ 39.033714] ravb_suspend+0x48/0x120
[ 39.033721] dpm_run_callback+0x4c/0x14c
[ 39.033731] device_suspend+0x11c/0x4dc
[ 39.033740] dpm_suspend+0xdc/0x214
[ 39.033748] dpm_suspend_start+0x48/0x60
[ 39.033758] suspend_devices_and_enter+0x124/0x574
[ 39.033769] pm_suspend+0x1ac/0x274
[ 39.033778] state_store+0x88/0x124
[ 39.033788] kobj_attr_store+0x14/0x24
[ 39.033798] sysfs_kf_write+0x48/0x6c
[ 39.033808] kernfs_fop_write_iter+0x118/0x1a8
[ 39.033817] vfs_write+0x27c/0x378
[ 39.033825] ksys_write+0x64/0xf4
[ 39.033833] __arm64_sys_write+0x18/0x20
[ 39.033841] invoke_syscall+0x44/0x104
[ 39.033852] el0_svc_common.constprop.0+0xb4/0xd4
[ 39.033862] do_el0_svc+0x18/0x20
[ 39.033870] el0_svc+0x3c/0xf0
[ 39.033880] el0t_64_sync_handler+0xc0/0xc4
[ 39.033888] el0t_64_sync+0x154/0x158
[ 39.041274] ravb 11c30000.ethernet eth0: Link is Down
Reported-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Closes: https://lore.kernel.org/netdev/4c6419d8-c06b-495c-b987-d66c2e1ff848@tuxon.dev/
Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btusb: mediatek: Add locks for usb_driver_claim_interface()
- L2CAP: accept zero as a special value for MTU auto-selection
- btusb: Fix possible infinite recursion of btusb_reset
- Add ABI doc for sysfs reset
- btnxpuart: Fix glitches seen in dual A2DP streaming
* tag 'for-net-2025-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
Bluetooth: Add ABI doc for sysfs reset
Bluetooth: Fix possible infinite recursion of btusb_reset
Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()
====================
Link: https://patch.msgid.link/20250129210057.1318963-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
both method table pointers in debugfs_fsdata need to be initialized,
obviously, and calculating the bitmap of present methods would also
go better if we start with initialized state.
Fixes: 41a0ecc0997c ("debugfs: get rid of dynamically allocation proxy_ops")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250129191937.GR1977892@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a test to bpf_offload.py for loading a devbound XDP program in
generic mode, checking that it fails correctly.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250127131344.238147-2-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Device-bound programs are used to support RX metadata kfuncs. These
kfuncs are driver-specific and rely on the driver context to read the
metadata. This means they can't work in generic XDP mode. However, there
is no check to disallow such programs from being attached in generic
mode, in which case the metadata kfuncs will be called in an invalid
context, leading to crashes.
Fix this by adding a check to disallow attaching device-bound programs
in generic mode.
Fixes: 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs")
Reported-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Closes: https://lore.kernel.org/r/dae862ec-43b5-41a0-8edf-46c59071cdda@hetzner-cloud.de
Tested-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250127131344.238147-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Testing with iperf3 using the "pasta" protocol splicer has revealed
a problem in the way tcp handles window advertising in extreme memory
squeeze situations.
Under memory pressure, a socket endpoint may temporarily advertise
a zero-sized window, but this is not stored as part of the socket data.
The reasoning behind this is that it is considered a temporary setting
which shouldn't influence any further calculations.
However, if we happen to stall at an unfortunate value of the current
window size, the algorithm selecting a new value will consistently fail
to advertise a non-zero window once we have freed up enough memory.
This means that this side's notion of the current window size is
different from the one last advertised to the peer, causing the latter
to not send any data to resolve the sitution.
The problem occurs on the iperf3 server side, and the socket in question
is a completely regular socket with the default settings for the
fedora40 kernel. We do not use SO_PEEK or SO_RCVBUF on the socket.
The following excerpt of a logging session, with own comments added,
shows more in detail what is happening:
// tcp_v4_rcv(->)
// tcp_rcv_established(->)
[5201<->39222]: ==== Activating log @ net/ipv4/tcp_input.c/tcp_data_queue()/5257 ====
[5201<->39222]: tcp_data_queue(->)
[5201<->39222]: DROPPING skb [265600160..265665640], reason: SKB_DROP_REASON_PROTO_MEM
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 259909392->260034360 (124968), unread 5565800, qlen 85, ofoq 0]
[OFO queue: gap: 65480, len: 0]
[5201<->39222]: tcp_data_queue(<-)
[5201<->39222]: __tcp_transmit_skb(->)
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: tcp_select_window(->)
[5201<->39222]: (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_NOMEM) ? --> TRUE
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
returning 0
[5201<->39222]: tcp_select_window(<-)
[5201<->39222]: ADVERTISING WIN 0, ACK_SEQ: 265600160
[5201<->39222]: [__tcp_transmit_skb(<-)
[5201<->39222]: tcp_rcv_established(<-)
[5201<->39222]: tcp_v4_rcv(<-)
// Receive queue is at 85 buffers and we are out of memory.
// We drop the incoming buffer, although it is in sequence, and decide
// to send an advertisement with a window of zero.
// We don't update tp->rcv_wnd and tp->rcv_wup accordingly, which means
// we unconditionally shrink the window.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 0, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 260040464->260040464 (0), unread 5559696, qlen 85, ofoq 0]
returning 6104 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// After each read, the algorithm for calculating the new receive
// window in __tcp_cleanup_rbuf() finds it is too small to advertise
// or to update tp->rcv_wnd.
// Meanwhile, the peer thinks the window is zero, and will not send
// any more data to trigger an update from the interrupt mode side.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 260099840->260171536 (71696), unread 5428624, qlen 83, ofoq 0]
returning 131072 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// The above pattern repeats again and again, since nothing changes
// between the reads.
[...]
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 265600160->265600160 (0), unread 0, qlen 0, ofoq 0]
returning 54672 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// The receive queue is empty, but no new advertisement has been sent.
// The peer still thinks the receive window is zero, and sends nothing.
// We have ended up in a deadlock situation.
Note that well behaved endpoints will send win0 probes, so the problem
will not occur.
Furthermore, we have observed that in these situations this side may
send out an updated 'th->ack_seq´ which is not stored in tp->rcv_wup
as it should be. Backing ack_seq seems to be harmless, but is of
course still wrong from a protocol viewpoint.
We fix this by updating the socket state correctly when a packet has
been dropped because of memory exhaustion and we have to advertize
a zero window.
Further testing shows that the connection recovers neatly from the
squeeze situation, and traffic can continue indefinitely.
Fixes: e2142825c120 ("net: tcp: send zero-window ACK when no memory")
Cc: Menglong Dong <menglong8.dong@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250127231304.1465565-1-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bgmac allocates new replacement buffer before handling each received
frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU
time. Ideally bgmac should just respect currently set MTU but it isn't
the case right now. For now just revert back to the old limited frame
size.
This change bumps NAT masquerade speed by ~95%.
Since commit 8218f62c9c9b ("mm: page_frag: use initial zero offset for
page_frag_alloc_align()"), the bgmac driver fails to open its network
interface successfully and runs out of memory in the following call
stack:
bgmac_open
-> bgmac_dma_init
-> bgmac_dma_rx_skb_for_slot
-> netdev_alloc_frag
BGMAC_RX_ALLOC_SIZE = 10048 and PAGE_FRAG_CACHE_MAX_SIZE = 32768.
Eventually we land into __page_frag_alloc_align() with the following
parameters across multiple successive calls:
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=0
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=10048
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=20096
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=30144
So in that case we do indeed have offset + fragsz (40192) > size (32768)
and so we would eventually return NULL. Reverting to the older 1500
bytes MTU allows the network driver to be usable again.
Fixes: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[florian: expand commit message about recent commits]
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250127175159.1788246-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michal Luczaj says:
====================
vsock: Transport reassignment and error handling issues
Series deals with two issues:
- socket reference count imbalance due to an unforgiving transport release
(triggered by transport reassignment);
- unintentional API feature, a failing connect() making the socket
impossible to use for any subsequent connect() attempts.
v2: https://lore.kernel.org/20250121-vsock-transport-vs-autobind-v2-0-aad6069a4e8c@rbox.co
v1: https://lore.kernel.org/20250117-vsock-transport-vs-autobind-v1-0-c802c803762d@rbox.co
====================
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-0-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Deliberately fail a connect() attempt; expect error. Then verify that
subsequent attempt (using the same socket) can still succeed, rather than
fail outright.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-6-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fail the autobind, then trigger a transport reassign. Socket might get
unbound from unbound_sockets, which then leads to a reference count
underflow.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-5-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Distill timeout-guarded vsock_connect_fd(). Adapt callers.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-4-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper for socket()+bind(). Adapt callers.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-3-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_err is set when a (connectible) connect() fails. Effectively, this makes
an otherwise still healthy SS_UNCONNECTED socket impossible to use for any
subsequent connection attempts.
Clear sk_err upon trying to establish a connection.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-2-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Preserve sockets bindings; this includes both resulting from an explicit
bind() and those implicitly bound through autobind during connect().
Prevents socket unbinding during a transport reassignment, which fixes a
use-after-free:
1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2)
2. transport->release() calls vsock_remove_bound() without checking if
sk was bound and moved to bound list (refcnt=1)
3. vsock_bind() assumes sk is in unbound list and before
__vsock_insert_bound(vsock_bound_sockets()) calls
__vsock_remove_bound() which does:
list_del_init(&vsk->bound_table); // nop
sock_put(&vsk->sk); // refcnt=0
BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730
Read of size 4 at addr ffff88816b46a74c by task a.out/2057
dump_stack_lvl+0x68/0x90
print_report+0x174/0x4f6
kasan_report+0xb9/0x190
__vsock_bind+0x62e/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x85/0x90
kmem_cache_alloc_noprof+0x131/0x450
sk_prot_alloc+0x5b/0x220
sk_alloc+0x2c/0x870
__vsock_create.constprop.0+0x2e/0xb60
vsock_create+0xe4/0x420
__sock_create+0x241/0x650
__sys_socket+0xf2/0x1a0
__x64_sys_socket+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x4b/0x70
kmem_cache_free+0x1a1/0x590
__sk_destruct+0x388/0x5a0
__vsock_bind+0x5e1/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:25 refcount_warn_saturate+0xce/0x150
RIP: 0010:refcount_warn_saturate+0xce/0x150
__vsock_bind+0x66d/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: underflow; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:28 refcount_warn_saturate+0xee/0x150
RIP: 0010:refcount_warn_saturate+0xee/0x150
vsock_remove_bound+0x187/0x1e0
__vsock_release+0x383/0x4a0
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x359/0xa80
task_work_run+0x107/0x1d0
do_exit+0x847/0x2560
do_group_exit+0xb8/0x250
__x64_sys_exit_group+0x3a/0x50
x64_sys_call+0xfec/0x14f0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-1-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The part of physical memory that exceeds the size of the linear mapping
will be discarded. When the system starts up normally, a warning message
will be printed to prevent confusion caused by the mismatch between the
system memory and the actual physical memory.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240814062625.19794-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When audit is enabled in a kernel build, and there are no LSMs active
that support LSM labeling, it is possible that local variable lsmctx
in the AUDIT_SIGNAL_INFO handler in audit_receive_msg() could be used
before it is properly initialize. Then kmalloc() will try to allocate
a large amount of memory with the uninitialized length.
This patch corrects this problem by initializing the lsmctx to a safe
value when it is declared, which avoid errors like:
WARNING: CPU: 2 PID: 443 at mm/page_alloc.c:4727 __alloc_pages_noprof
...
ra: 9000000003059644 ___kmalloc_large_node+0x84/0x1e0
ERA: 900000000304d588 __alloc_pages_noprof+0x4c8/0x1040
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000007 (+FPE +SXE +ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
CPU: 2 UID: 0 PID: 443 Comm: auditd Not tainted 6.13.0-rc1+ #1899
...
Call Trace:
[<9000000002def6a8>] show_stack+0x30/0x148
[<9000000002debf58>] dump_stack_lvl+0x68/0xa0
[<9000000002e0fe18>] __warn+0x80/0x108
[<900000000407486c>] report_bug+0x154/0x268
[<90000000040ad468>] do_bp+0x2a8/0x320
[<9000000002dedda0>] handle_bp+0x120/0x1c0
[<900000000304d588>] __alloc_pages_noprof+0x4c8/0x1040
[<9000000003059640>] ___kmalloc_large_node+0x80/0x1e0
[<9000000003061504>] __kmalloc_noprof+0x2c4/0x380
[<9000000002f0f7ac>] audit_receive_msg+0x764/0x1530
[<9000000002f1065c>] audit_receive+0xe4/0x1c0
[<9000000003e5abe8>] netlink_unicast+0x340/0x450
[<9000000003e5ae9c>] netlink_sendmsg+0x1a4/0x4a0
[<9000000003d9ffd0>] __sock_sendmsg+0x48/0x58
[<9000000003da32f0>] __sys_sendto+0x100/0x170
[<9000000003da3374>] sys_sendto+0x14/0x28
[<90000000040ad574>] do_syscall+0x94/0x138
[<9000000002ded318>] handle_syscall+0xb8/0x158
Fixes: 6fba89813ccf333d ("lsm: ensure the correct LSM context releaser")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[PM: resolved excessive line length in the backtrace]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The string allocated in sym_warn_unmet_dep() is never freed, leading
to a memory leak when an unmet dependency is detected.
Fixes: f8f69dc0b4e0 ("kconfig: make unmet dependency warnings readable")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
|
|
Most 'make *config' commands use .config as the base configuration file.
When .config does not exist, Kconfig tries to load a file listed in
KCONFIG_DEFCONFIG_LIST instead.
However, since commit b75b0a819af9 ("kconfig: change defconfig_list
option to environment variable"), warning messages have displayed an
incorrect file name in such cases.
Below is a demonstration using Debian Trixie. While loading
/boot/config-6.12.9-amd64, the warning messages incorrectly show .config
as the file name.
With this commit, the correct file name is displayed in warnings.
[Before]
$ rm -f .config
$ make config
#
# using defaults found in /boot/config-6.12.9-amd64
#
.config:6804:warning: symbol value 'm' invalid for FB_BACKLIGHT
.config:9895:warning: symbol value 'm' invalid for ANDROID_BINDER_IPC
[After]
$ rm -f .config
$ make config
#
# using defaults found in /boot/config-6.12.9-amd64
#
/boot/config-6.12.9-amd64:6804:warning: symbol value 'm' invalid for FB_BACKLIGHT
/boot/config-6.12.9-amd64:9895:warning: symbol value 'm' invalid for ANDROID_BINDER_IPC
Fixes: b75b0a819af9 ("kconfig: change defconfig_list option to environment variable")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This new mount option allows to completely disable creating new reparse
points. When -o sfu or -o mfsymlinks or -o symlink= is not specified then
creating any special file (fifo, socket, symlink, block and char) will fail
with -EOPNOTSUPP error.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently Linux CIFS client creates a new symlink of the first flavor which
is allowed by mount options, parsed in this order: -o (no)mfsymlinks,
-o (no)sfu, -o (no)unix (+ its aliases) and -o reparse=[type].
Introduce a new mount option -o symlink= for explicitly choosing a symlink
flavor. Possible options are:
-o symlink=default - The default behavior, like before this change.
-o symlink=none - Disallow creating a new symlinks
-o symlink=native - Create as native SMB symlink reparse point
-o symlink=unix - Create via SMB1 unix extension command
-o symlink=mfsymlinks - Create as regular file of mfsymlinks format
-o symlink=sfu - Create as regular system file of SFU format
-o symlink=nfs - Create as NFS reparse point
-o symlink=wsl - Create as WSL reparse point
So for example specifying -o sfu,mfsymlinks,symlink=native will allow to
parse symlinks also of SFU and mfsymlinks types (which are disabled by
default unless mount option is explicitly specified), but new symlinks will
be created under native SMB type (which parsing is always enabled).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If the SMB symlink is stored on NT server in absolute form then it points
to the NT object hierarchy, which is different from POSIX one and needs
some conversion / mapping.
To make interoperability with Windows SMB server and WSL subsystem, reuse
its logic of mapping between NT paths and POSIX paths into Linux SMB
client.
WSL subsystem on Windows uses for -t drvfs mount option -o symlinkroot=
which specifies the POSIX path where are expected to be mounted lowercase
Windows drive letters (without colon).
Do same for Linux SMB client and add a new mount option -o symlinkroot=
which mimics the drvfs mount option of the same name. It specifies where in
the Linux VFS hierarchy is the root of the DOS / Windows drive letters, and
translates between absolute NT-style symlinks and absolute Linux VFS
symlinks. Default value of symlinkroot is "/mnt", same what is using WSL.
Note that DOS / Windows drive letter symlinks are just subset of all
possible NT-style symlinks. Drive letters live in NT subtree \??\ and
important details about NT paths and object hierarchy are in the comments
in this change.
When symlink target location from non-POSIX SMB server is in absolute form
(indicated by absence of SYMLINK_FLAG_RELATIVE) then it is converted to
Linux absolute symlink according to symlinkroot configuration.
And when creating a new symlink on non-POSIX SMB server in absolute form
then Linux absolute target is converted to NT-style according to
symlinkroot configuration.
When SMB server is POSIX, then this change does not affect neither reading
target location of symlink, nor creating a new symlink. It is expected that
POSIX SMB server works with POSIX paths where the absolute root is /.
This change improves interoperability of absolute SMB symlinks with Windows
SMB servers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For checking if path is reparse point and setting data->reparse_point
member, it is enough to check if ATTR_REPARSE is present.
It is not required to call CIFS_open() without OPEN_REPARSE_POINT and
checking for -EOPNOTSUPP error code.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Member 'symlink' is part of the union in struct cifs_open_info_data. Its
value is assigned on few places, but is always read through another union
member 'reparse_point'. So to make code more readable, always use only
'reparse_point' member and drop whole union structure. No function change.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are some incorrect information about individual SMB permission
constants like WRITE_DAC can change ownership, or incomplete information to
distinguish between ACL types (discretionary vs system) and there is
completely missing information how permissions apply for directory objects
and what is meaning of GENERIC_* bits.
Also there is missing constant for MAXIMUM_ALLOWED permission.
Fix and extend description of all SMB permission constants to match the
reality, how the reference Windows SMB / NTFS implementation handles them.
Links to official Microsoft documentation related to permissions:
https://learn.microsoft.com/en-us/windows/win32/fileio/file-access-rights-constants
https://learn.microsoft.com/en-us/windows/win32/secauthz/access-mask
https://learn.microsoft.com/en-us/windows/win32/secauthz/standard-access-rights
https://learn.microsoft.com/en-us/windows/win32/secauthz/generic-access-rights
https://learn.microsoft.com/en-us/windows/win32/api/winternl/nf-winternl-ntcreatefile
https://learn.microsoft.com/en-us/windows-hardware/drivers/ddi/ntifs/nf-ntifs-ntcreatefile
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
