summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-17clk: imx: clk-pll14xx: unbypass PLL by defaultPeng Fan
When registering the PLL, unbypass the PLL. The PLL has two bypass control bit, BYPASS and EXT_BYPASS. we will expose EXT_BYPASS to clk driver for mux usage, and keep BYPASS inside pll14xx usage. The PLL has a restriction that when M/P change, need to RESET/BYPASS pll to avoid glitch, so we could not expose BYPASS. To make it easy for clk driver usage, unbypass PLL which does not hurt current function. Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-3-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: imx: pll14xx: avoid glitch when set ratePeng Fan
According to PLL1443XA and PLL1416X spec, "When BYPASS is 0 and RESETB is changed from 0 to 1, FOUT starts to output unstable clock until lock time passes. PLL1416X/PLL1443XA may generate a glitch at FOUT." So set BYPASS when RESETB is changed from 0 to 1 to avoid glitch. In the end of set rate, BYPASS will be cleared. When prepare clock, also need to take care to avoid glitch. So we also follow Spec to set BYPASS before RESETB changed from 0 to 1. And add a check if the RESETB is already 0, directly return 0; Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lkml.kernel.org/r/1568043491-20680-2-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: mvebu: ap80x: add AP807 clock supportBen Peled
Add driver support for AP807 clock. Signed-off-by: Ben Peled <bpeled@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-9-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: mvebu: ap806: Prepare the introduction of AP807 clock supportBen Peled
Factor out the code that is only useful to AP806 so it will be easier to support AP807. No functional changes. Signed-off-by: Ben Peled <bpeled@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-8-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driverOmri Itach
Add dynamic AP-DCLK clock (hclk) to system controller driver. AP-DCLK is half the rate of DDR clock, so its derrived from Sample At Reset configuration. The clock frequency is required for AP806 AXI monitor profiling feature. Signed-off-by: Omri Itach <omrii@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-7-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: mvebu: ap806: be more explicit on what SaR isMiquel Raynal
"SaR" means Sample at Reset. DIP switches can be changed on the board, their states at reset time is available through a register read. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-6-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: mvebu: ap80x-cpu: add AP807 CPU clock supportBen Peled
Enhance the ap-cpu-clk driver to support both AP806 and AP807 CPU clocks. Signed-off-by: Ben Peled <bpeled@marvell.com> [<miquel.raynal@bootlin.com>: use device data instead of conditions on the compatible] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-5-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clockChristine Gharzuzi
This patch allows same flow to be executed on chips with different register mappings like AP806 and, in the future, AP807. Note: this patch has no functional effect, and only prepares the driver for additional chips to be supported by retrieving the right device data depenging on the compatible property. Signed-off-by: Christine Gharzuzi <chrisg@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-4-miquel.raynal@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17dt-bindings: ap806: Document AP807 clock compatibleMiquel Raynal
Add AP807 clock compatible to the bindings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-3-miquel.raynal@bootlin.com Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17dt-bindings: ap80x: Document AP807 CPU clock compatibleMiquel Raynal
Add AP807 CPU clock compatible to the bindings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20190805100310.29048-2-miquel.raynal@bootlin.com Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: sprd: add missing kfreeChunyan Zhang
The number of config registers for different pll clocks probably are not same, so we have to use malloc, and should free the memory before return. Fixes: 3e37b005580b ("clk: sprd: add adjustable pll support") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Link: https://lkml.kernel.org/r/20190905103009.27166-1-zhang.lyra@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: at91: allow 24 Mhz clock as input for PLLEugen Hristev
The PLL input range needs to be able to allow 24 Mhz crystal as input Update the range accordingly in plla characteristics struct Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1568183622-7858-1-git-send-email-eugen.hristev@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: c561e41ce4d2 ("clk: at91: add sama5d2 PMC driver") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17Merge tag 'devprop-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "Improve software node support (Heikki Krogerus) and clean up two assorted pieces of code (Andy Shevchenko, Geert Uytterhoeven)" * tag 'devprop-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: software node: Initialize the return value in software_node_find_by_name() software node: Initialize the return value in software_node_to_swnode() ACPI / property: Fix acpi_graph_get_remote_endpoint() name in kerneldoc device property: Remove duplicate test for NULL platform/x86: intel_cht_int33fe: Use new API to gain access to the role switch usb: roles: intel_xhci: Supplying software node for the role mux software node: Add software_node_find_by_name()
2019-09-17Merge tag 'acpi-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These include an ACPICA update (to upstream revision 20190816), improvements of support for memory hot-add in the HMAT handling code and some assorted fixes and cleanups. Specifics: - Update the ACPICA code in the kernel to upstream revision 20190816 including: * Internal limits change to support larger systems (Bob Moore). * Macros clean up (Bob Moore). * printf format string fixes (Bob Moore). * Full deployment of the ACPI_PRINTF_LIKE macro (Bob Moore). * Tools improvements (Bob Moore, Colin Ian King). * Windows _OSI support fixes (Jung-uk Kim). - Improve memory hot-add support in the ACPI HMAT handling code (Dan Williams, Keith Busch). - Fix the ACPI LPSS (Low-Power Subsystem) driver for Intel SoCs to save and restore private registers during system-wide suspend and resume on systems with the Lynxpoint PCH (Jarkko Nikula). - Convert the ACPI documentation related to LEDs to ReST (Sakari Ailus). - Fix assorted issues and make assorted minor improvements in the ACPI-related code (Al Stone, Andy Shevchenko, Jiri Slaby, Kelsey Skunberg, Krzysztof Wilczynski, Liguang Zhang, Wenwen Wang, YueHaibing)" * tag 'acpi-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) ACPI / PCI: fix acpi_pci_irq_enable() memory leak ACPI: custom_method: fix memory leaks ACPI: thermal: Remove redundant acpi_has_method() calls ACPI / CPPC: do not require the _PSD method ACPI: SBS: remove unused const variable 'SMBUS_PEC' ACPI / LPSS: Save/restore LPSS private registers also on Lynxpoint ACPI/PCI: Remove surplus parentheses from a return statement ACPICA: Update version to 20190816. ACPICA: Add "Windows 2019" string to _OSI support. ACPICA: Differentiate Windows 8.1 from Windows 8. ACPICA: Fully deploy ACPI_PRINTF_LIKE macro ACPICA: iASL,acpi_dump: Improve y/n query ACPICA: Fix issues with arg types within printf format strings ACPICA: Macros: remove pointer math on a null pointer ACPICA: Increase total number of possible Owner IDs ACPICA: Debugger: remove redundant assignment on obj_desc Documentation: ACPI: DSD: Convert LED documentation to ReST ACPI / APEI: Release resources if gen_pool_add() fails HMAT: Skip publishing target info for nodes with no online memory HMAT: Register attributes for memory hot add ...
2019-09-18powerpc: Use ftrace_graph_ret_addr() when unwindingNaveen N. Rao
With support for HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, ftrace_graph_ret_addr() provides more robust unwinding when function graph is in use. Update show_stack() to use the same. With dump_stack() added to sysrq_sysctl_handler(), before this patch: root@(none):/sys/kernel/debug/tracing# cat /proc/sys/kernel/sysrq CPU: 0 PID: 218 Comm: cat Not tainted 5.3.0-rc7-00868-g8453ad4a078c-dirty #20 Call Trace: [c0000000d1e13c30] [c00000000006ab98] return_to_handler+0x0/0x40 (dump_stack+0xe8/0x164) (unreliable) [c0000000d1e13c80] [c000000000145680] sysrq_sysctl_handler+0x48/0xb8 [c0000000d1e13cd0] [c00000000006ab98] return_to_handler+0x0/0x40 (proc_sys_call_handler+0x274/0x2a0) [c0000000d1e13d60] [c00000000006ab98] return_to_handler+0x0/0x40 (return_to_handler+0x0/0x40) [c0000000d1e13d80] [c00000000006ab98] return_to_handler+0x0/0x40 (__vfs_read+0x3c/0x70) [c0000000d1e13dd0] [c00000000006ab98] return_to_handler+0x0/0x40 (vfs_read+0xb8/0x1b0) [c0000000d1e13e20] [c00000000006ab98] return_to_handler+0x0/0x40 (ksys_read+0x7c/0x140) After this patch: Call Trace: [c0000000d1e33c30] [c00000000006ab58] return_to_handler+0x0/0x40 (dump_stack+0xe8/0x164) (unreliable) [c0000000d1e33c80] [c000000000145680] sysrq_sysctl_handler+0x48/0xb8 [c0000000d1e33cd0] [c00000000006ab58] return_to_handler+0x0/0x40 (proc_sys_call_handler+0x274/0x2a0) [c0000000d1e33d60] [c00000000006ab58] return_to_handler+0x0/0x40 (__vfs_read+0x3c/0x70) [c0000000d1e33d80] [c00000000006ab58] return_to_handler+0x0/0x40 (vfs_read+0xb8/0x1b0) [c0000000d1e33dd0] [c00000000006ab58] return_to_handler+0x0/0x40 (ksys_read+0x7c/0x140) [c0000000d1e33e20] [c00000000006ab58] return_to_handler+0x0/0x40 (system_call+0x5c/0x68) Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/dc89c9a887121342d9c7819482c3dabdece2a323.1567707399.git.naveen.n.rao@linux.vnet.ibm.com
2019-09-18powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTRNaveen N. Rao
This associates entries in the ftrace_ret_stack with corresponding stack frames, enabling more robust stack unwinding. Also update the only user of ftrace_graph_ret_addr() to pass the stack pointer. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0224f2d0971b069c678e2ff678cfc2cd1e114cfe.1567707399.git.naveen.n.rao@linux.vnet.ibm.com
2019-09-18ftrace: Look up the address of return_to_handler() using helpersNaveen N. Rao
This ensures that we use the right address on architectures that use function descriptors. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8f6f14d192a994008ac370ce14036bbe67224c7d.1567707399.git.naveen.n.rao@linux.vnet.ibm.com
2019-09-17Merge tag 'pm-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include a rework of the main suspend-to-idle code flow (related to the handling of spurious wakeups), a switch over of several users of cpufreq notifiers to QoS-based limits, a new devfreq driver for Tegra20, a new cpuidle driver and governor for virtualized guests, an extension of the wakeup sources framework to expose wakeup sources as device objects in sysfs, and more. Specifics: - Rework the main suspend-to-idle control flow to avoid repeating "noirq" device resume and suspend operations in case of spurious wakeups from the ACPI EC and decouple the ACPI EC wakeups support from the LPS0 _DSM support (Rafael Wysocki). - Extend the wakeup sources framework to expose wakeup sources as device objects in sysfs (Tri Vo, Stephen Boyd). - Expose system suspend statistics in sysfs (Kalesh Singh). - Introduce a new haltpoll cpuidle driver and a new matching governor for virtualized guests wanting to do guest-side polling in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell). - Fix the menu and teo cpuidle governors to allow the scheduler tick to be stopped if PM QoS is used to limit the CPU idle state exit latency in some cases (Rafael Wysocki). - Increase the resolution of the play_idle() argument to microseconds for more fine-grained injection of CPU idle cycles (Daniel Lezcano). - Switch over some users of cpuidle notifiers to the new QoS-based frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events (Viresh Kumar). - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li). - Add support for MT8183 and MT8516 to the mediatek cpufreq driver (Andrew-sh.Cheng, Fabien Parent). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang). - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz). - Update the qcom cpufreq driver (among other things, to make it easier to extend and to use kryo cpufreq for other nvmem-based SoCs) and add qcs404 support to it (Niklas Cassel, Douglas RAILLARD, Sibi Sankar, Sricharan R). - Fix assorted issues and make assorted minor improvements in the cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli, Gustavo Silva, Hariprasad Kelam). - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd Bergmann). - Add new Exynos PPMU events to devfreq events and extend that mechanism (Lukasz Luba). - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny). - Improve devfreq documentation and governor code, fix spelling typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez, MyungJoo Ham, Gaël PORTAY). - Add regulators enable and disable to the OPP (operating performance points) framework (Kamil Konieczny). - Update the OPP framework to support multiple opp-suspend properties (Anson Huang). - Fix assorted issues and make assorted minor improvements in the OPP code (Niklas Cassel, Viresh Kumar, Yue Hu). - Clean up the generic power domains (genpd) framework (Ulf Hansson). - Clean up assorted pieces of power management code and documentation (Akinobu Mita, Amit Kucheria, Chuhong Yuan). - Update the pm-graph tool to version 5.5 including multiple fixes and improvements (Todd Brandt). - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven, Sébastien Szymanski)" * tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits) cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available cpuidle-haltpoll: do not set an owner to allow modunload cpuidle-haltpoll: return -ENODEV on modinit failure cpuidle-haltpoll: set haltpoll as preferred governor cpuidle: allow governor switch on cpuidle_register_driver() PM: runtime: Documentation: add runtime_status ABI document pm-graph: make setVal unbuffered again for python2 and python3 powercap: idle_inject: Use higher resolution for idle injection cpuidle: play_idle: Increase the resolution to usec cpuidle-haltpoll: vcpu hotplug support cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state() PM / Domains: Simplify genpd_lookup_dev() ...
2019-09-17Merge tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - Move Dmaengine DT bindings to YAML and convert Allwinner to schema. - FSL dma device_synchronize implementation - DW split acpi and of helpers and updates to driver and support for Elkhart Lake - Move filter fn as private for omap-dma and edma drivers and improvements to these drivers - Mark expected switch fall-through in couple of drivers - Renames of shdma and nbpfaxi binding document - Minor updates to bunch of drivers * tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (55 commits) dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits() dmaengine: ti: edma: Only reset region0 access registers dmaengine: ti: edma: Do not reset reserved paRAM slots dmaengine: iop-adma.c: fix printk format warning dmaengine: stm32-dma: Use struct_size() helper dt-bindings: dmaengine: dma-common: Fix the dma-channel-mask property dmanegine: ioat/dca: Use struct_size() helper dmaengine: iop-adma: remove set but not used variable 'slots_per_op' dmaengine: dmatest: Add support for completion polling dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status() dmaengine: ti: omap-dma: Remove 'Assignment in if condition' dmaengine: ti: edma: Remove 'Assignment in if condition' dmaengine: dw: platform: Split OF helpers to separate module dmaengine: dw: platform: Split ACPI helpers to separate module dmaengine: dw: platform: Move handle check to dw_dma_acpi_controller_register() dmaengine: dw: platform: Switch to acpi_dma_controller_register() dmaengine: dw: platform: Use devm_platform_ioremap_resource() dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw: platform: Use struct dw_dma_chip_pdata dmaengine: dw: Export struct dw_dma_chip_pdata for wider use ...
2019-09-17nbd: fix possible page fault for nbd diskXiubo Li
When the NBD_CFLAG_DESTROY_ON_DISCONNECT flag is set and at the same time when the socket is closed due to the server daemon is restarted, just before the last DISCONNET is totally done if we start a new connection by using the old nbd_index, there will be crashing randomly, like: <3>[ 110.151949] block nbd1: Receive control failed (result -32) <1>[ 110.152024] BUG: unable to handle page fault for address: 0000058000000840 <1>[ 110.152063] #PF: supervisor read access in kernel mode <1>[ 110.152083] #PF: error_code(0x0000) - not-present page <6>[ 110.152094] PGD 0 P4D 0 <4>[ 110.152106] Oops: 0000 [#1] SMP PTI <4>[ 110.152120] CPU: 0 PID: 6698 Comm: kworker/u5:1 Kdump: loaded Not tainted 5.3.0-rc4+ #2 <4>[ 110.152136] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 <4>[ 110.152166] Workqueue: knbd-recv recv_work [nbd] <4>[ 110.152187] RIP: 0010:__dev_printk+0xd/0x67 <4>[ 110.152206] Code: 10 e8 c5 fd ff ff 48 8b 4c 24 18 65 48 33 0c 25 28 00 [...] <4>[ 110.152244] RSP: 0018:ffffa41581f13d18 EFLAGS: 00010206 <4>[ 110.152256] RAX: ffffa41581f13d30 RBX: ffff96dd7374e900 RCX: 0000000000000000 <4>[ 110.152271] RDX: ffffa41581f13d20 RSI: 00000580000007f0 RDI: ffffffff970ec24f <4>[ 110.152285] RBP: ffffa41581f13d80 R08: ffff96dd7fc17908 R09: 0000000000002e56 <4>[ 110.152299] R10: ffffffff970ec24f R11: 0000000000000003 R12: ffff96dd7374e900 <4>[ 110.152313] R13: 0000000000000000 R14: ffff96dd7374e9d8 R15: ffff96dd6e3b02c8 <4>[ 110.152329] FS: 0000000000000000(0000) GS:ffff96dd7fc00000(0000) knlGS:0000000000000000 <4>[ 110.152362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 110.152383] CR2: 0000058000000840 CR3: 0000000067cc6002 CR4: 00000000001606f0 <4>[ 110.152401] Call Trace: <4>[ 110.152422] _dev_err+0x6c/0x83 <4>[ 110.152435] nbd_read_stat.cold+0xda/0x578 [nbd] <4>[ 110.152448] ? __switch_to_asm+0x34/0x70 <4>[ 110.152468] ? __switch_to_asm+0x40/0x70 <4>[ 110.152478] ? __switch_to_asm+0x34/0x70 <4>[ 110.152491] ? __switch_to_asm+0x40/0x70 <4>[ 110.152501] ? __switch_to_asm+0x34/0x70 <4>[ 110.152511] ? __switch_to_asm+0x40/0x70 <4>[ 110.152522] ? __switch_to_asm+0x34/0x70 <4>[ 110.152533] recv_work+0x35/0x9e [nbd] <4>[ 110.152547] process_one_work+0x19d/0x340 <4>[ 110.152558] worker_thread+0x50/0x3b0 <4>[ 110.152568] kthread+0xfb/0x130 <4>[ 110.152577] ? process_one_work+0x340/0x340 <4>[ 110.152609] ? kthread_park+0x80/0x80 <4>[ 110.152637] ret_from_fork+0x35/0x40 This is very easy to reproduce by running the nbd-runner. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17nbd: rename the runtime flags as NBD_RT_ prefixedXiubo Li
Preparing for the destory when disconnecting crash fixing. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17block, bfq: push up injection only after setting service timePaolo Valente
If equal to 0, the injection limit for a bfq_queue is pushed to 1 after a first sample of the total service time of the I/O requests of the queue is computed (to allow injection to start). Yet, because of a mistake in the branch that performs this action, the push may happen also in some other case. This commit fixes this issue. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17block, bfq: increase update frequency of inject limitPaolo Valente
The update period of the injection limit has been tentatively set to 100 ms, to reduce fluctuations. This value however proved to cause, occasionally, the limit to be decremented for some bfq_queue only after the queue underwent excessive injection for a lot of time. This commit reduces the period to 10 ms. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1Paolo Valente
Upon an increment attempt of the injection limit, the latter is constrained not to become higher than twice the maximum number max_rq_in_driver of I/O requests that have happened to be in service in the drive. This high bound allows the injection limit to grow beyond max_rq_in_driver, which may then cause max_rq_in_driver itself to grow. However, since the limit is incremented by only one unit at a time, there is no need for such a high bound, and just max_rq_in_driver+1 is enough. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17block, bfq: update inject limit only after injection occurredPaolo Valente
BFQ updates the injection limit of each bfq_queue as a function of how much the limit inflates the service times experienced by the I/O requests of the queue. So only service times affected by injection must be taken into account. Unfortunately, in the current implementation of this update scheme, the service time of an I/O request rq not affected by injection may happen to be considered in the following case: there is no I/O request in service when rq arrives. This commit fixes this issue by making sure that only service times affected by injection are considered for updating the injection limit. In particular, the service time of an I/O request rq is now considered only if at least one of the following two conditions holds: - the destination bfq_queue for rq underwent injection before rq arrival, and there is still I/O in service in the drive on rq arrival (the service of such unfinished I/O may delay the service of rq); - injection occurs between the arrival and the completion time of rq. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17block: centralize PI remapping logic to the block layerMax Gurtovoy
Currently t10_pi_prepare/t10_pi_complete functions are called during the NVMe and SCSi layers command preparetion/completion, but their actual place should be the block layer since T10-PI is a general data integrity feature that is used by block storage protocols. Introduce .prepare_fn and .complete_fn callbacks within the integrity profile that each type can implement according to its needs. Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY isn't defined in the config. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17block: use symbolic constants for t10_pi typeMax Gurtovoy
Replace all hard-coded values with T10_PI_TYPES to make the code more readable. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17Merge tag 'leds-for-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-09-17Merge tag 'media/v5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - a new sensor driver for ov5675 - a new platform driver for Allwinner A10 sensor interface - some new remote controller keymaps - some cosmetic changes at V4L2 core in order to avoid #ifdefs and to merge two core modules into one - removal of bcm2048 radio driver from staging - removal of davinci_vpfe video driver from staging - regression fix since Kernel 5.1 at the legacy VideoBuffer version 1 core - added some documentation for remote controller protocols - pixel format documentation was split on two files - lots of other driver improvements and cleanups * tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits) media: videobuf-core.c: poll_wait needs a non-NULL buf pointer media: sun4i: Make sun4i_csi_formats static media: imx: remove unused including <linux/version.h> media: stm32-dcmi: Delete an unnecessary of_node_put() call in dcmi_probe() media: pvrusb2: qctrl.flag will be uninitlaized if cx2341x_ctrl_query() returns error code media: em28xx: Fix exception handling in em28xx_alloc_urbs() media: don't do a 31 bit shift on a signed int media: use the BIT() macro media: ov9650: add a sanity check media: aspeed-video: address a protential usage of an unitialized var media: vicodec: make life easier for static analyzers media: remove include stdarg.h from some drivers v4l2-core: fix coding style for the two new c files media: v4l2-core: Remove BUG() from i2c and spi helpers media: v4l2-core: introduce a helper to unregister a i2c subdev media: v4l2-core: introduce a helper to unregister a spi subdev media: v4l2-core: move i2c helpers out of v4l2-common.c media: v4l2-core: move spi helpers out of v4l2-common.c media: v4l2-core: Module re-organization media: usbvision: Remove dead code ...
2019-09-17Merge tag 'sound-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "As shown in diffstat and logs, it was again a busy development cycle at this time, too. The most significant changes are still on-going refactoring / modernization works for ASoC core and drivers, but there are lots of other changes as well. Here we go, some highlights below: ASoC: - Quite a lot of cleanup / refactoring of ASoC core and APIs; most of them are systematic, but also including cleanups and modernization - A bulk of updates for some ASoC platforms, Freescale, sunxi and Intel SST/SOF - Initial support for Sound Open Firmware on i.MX8 - Removal of deprecated w90x900 and nuc900 drivers - New support for Cirrus Logic CS47L15 and CS47L92, Freescale i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334 USB-audio: - More validations of descriptor units for hardening against bugs reported by fuzzers - PCM device assignment workaround for a past call-order change - Scarlett Gen2 mixer interface, a few more more quirks HD-audio: - Support for audio component with AMD/ATI and Nvidia HDMI codecs - Clean up HD-audio core and remove indirect access ops for Intel SOF - DMIC detection at probe; it would make systems automatically falling back to SST/SOF driver on devices that need DMIC handling. Needs a new Kconfig to set, and beware that it's still new and a bit experimental FireWire: - Lots of code refactoring and cleanups" * tag 'sound-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (521 commits) ASoC: sdm845: remove unneeded semicolon ASoC: fsl_sai: Implement set_bclk_ratio ASoC: dmaengine: Replace strncpy() with strscpy_pad() for pcm->name ASoC: wcd9335: remove redundant use of ret variable ALSA: firewire-tascam: check intermediate state of clock status and retry ALSA: firewire-tascam: handle error code when getting current source of clock ASoC: hdmi-codec: Add an op to set callback function for plug event ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF ASoC: rt5677: Remove magic number register writes ASoC: soc-core: self contained soc_unbind_aux_dev() ASoC: soc-core: add soc_unbind_aux_dev() ASoC: soc-core: self contained soc_bind_aux_dev() ASoC: soc-core: move soc_probe_link_dais() next to soc_remove_link_dais() ASoC: soc-core: self contained soc_probe_link_dais() ASoC: soc-core: add new soc_link_init() ASoC: soc-core: move soc_probe_dai() next to soc_remove_dai() ASoC: soc-core: self contained soc_remove_link_dais() ASoC: soc-core: self contained soc_remove_link_components() ASoC: soc-core: self contained soc_probe_link_components() ASoC: rt1308: make array pd static const, makes object smaller ...
2019-09-17Merge tag 'mmc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Fixup processing of SDIO IRQs during system suspend/resume - Add helper function to indicate if SDIO IRQs is enabled MMC host: - bcm2835: Take SWIOTLB memory size limitation into account - dw_mmc: Improve SDIO IRQs support - mtk-sd: Various improvements - mtk-sd: Improve SDIO IRQs support - sdhci-iproc: Add support for emmc2 of the BCM2711 - sdhci-of-arasan: Add Support for Intel LGM eMMC - sdhci-of-aspeed: Add support for the ASPEED SD controller - sdhci-of-esdhc: Deal with erratum A011334 support in ls1028a 1.0 SoC - sdhci-pci: Prepare to add support of Genesys Logic GL975x - sdhci-pci: Add another Id for Intel CML - sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue - sunxi: Add support for H5 compatibles" * tag 'mmc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits) ms_block: fix spelling mistake "randomally" -> "randomly" mmc: dw_mmc: hi3798cv200: make array degrees static const, makes object smaller mmc: sdhci: Convert to use sdio_irq_claimed() mmc: sdhci: Drop redundant code for SDIO IRQs mmc: sdhci: Drop redundant check in sdhci_ack_sdio_irq() mmc: core: Fixup processing of SDIO IRQs during system suspend/resume mmc: core: WARN if SDIO IRQs are enabled for non-powered card in suspend mmc: core: Clarify that the ->ack_sdio_irq() callback is mandatory mmc: core: Clarify sdio_irq_pending flag for MMC_CAP2_SDIO_IRQ_NOTHREAD mmc: core: Move code to get pending SDIO IRQs to a function mmc: mtk-sd: Re-store SDIO IRQs mask at system resume mmc: dw_mmc: Re-store SDIO IRQs mask at system resume mmc: core: Add helper function to indicate if SDIO IRQs is enabled mmc: sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue mmc: sdhci-pci-o2micro: Move functions in preparation to fix DLL lock phase shift issue mmc: sdhci-pci-o2micro: Change O2 Host PLL and DLL register name mmc: sdhci: Fix incorrect switch to HS mode mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock() ...
2019-09-17Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Two NVMe pull requests: - ana log parse fix from Anton - nvme quirks support for Apple devices from Ben - fix missing bio completion tracing for multipath stack devices from Hannes and Mikhail - IP TOS settings for nvme rdma and tcp transports from Israel - rq_dma_dir cleanups from Israel - tracing for Get LBA Status command from Minwoo - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself - Some consolidation between the fabrics transports for handling the CAP register - reset race with ns scanning fix for fabrics (move fabrics commands to a dedicated request queue with a different lifetime from the admin request queue)." - controller reset and namespace scan races fixes - nvme discovery log change uevent support - naming improvements from Keith - multiple discovery controllers reject fix from James - some regular cleanups from various people - Series fixing (and re-fixing) null_blk debug printing and nr_devices checks (André) - A few pull requests from Song, with fixes from Andy, Guoqing, Guilherme, Neil, Nigel, and Yufen. - REQ_OP_ZONE_RESET_ALL support (Chaitanya) - Bio merge handling unification (Christoph) - Pick default elevator correctly for devices with special needs (Damien) - Block stats fixes (Hou) - Timeout and support devices nbd fixes (Mike) - Series fixing races around elevator switching and device add/remove (Ming) - sed-opal cleanups (Revanth) - Per device weight support for BFQ (Fam) - Support for blk-iocost, a new model that can properly account cost of IO workloads. (Tejun) - blk-cgroup writeback fixes (Tejun) - paride queue init fixes (zhengbin) - blk_set_runtime_active() cleanup (Stanley) - Block segment mapping optimizations (Bart) - lightnvm fixes (Hans/Minwoo/YueHaibing) - Various little fixes and cleanups * tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits) null_blk: format pr_* logs with pr_fmt null_blk: match the type of parameter nr_devices null_blk: do not fail the module load with zero devices block: also check RQF_STATS in blk_mq_need_time_stamp() block: make rq sector size accessible for block stats bfq: Fix bfq linkage error raid5: use bio_end_sector in r5_next_bio raid5: remove STRIPE_OPS_REQ_PENDING md: add feature flag MD_FEATURE_RAID0_LAYOUT md/raid0: avoid RAID0 data corruption due to layout confusion. raid5: don't set STRIPE_HANDLE to stripe which is in batch list raid5: don't increment read_errors on EILSEQ return nvmet: fix a wrong error status returned in error log page nvme: send discovery log page change events to userspace nvme: add uevent variables for controller devices nvme: enable aen regardless of the presence of I/O queues nvme-fabrics: allow discovery subsystems accept a kato nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery() nvme: Remove redundant assignment of cq vector nvme: Assign subsys instance from first ctrl ...
2019-09-17Merge tag 'for-5.4/libata-2019-09-15' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata updates from Jens Axboe: - Kill unused export (Andy) - Use dma_set_mask_and_coherent() throughout (Christoph) - Drop PCS quirk on Denverton, which has different register layout (Dan) - Support non-boot time detection for pata_buddha (Max) * tag 'for-5.4/libata-2019-09-15' of git://git.kernel.dk/linux-block: libata/ahci: Drop PCS quirk for Denverton and beyond ahci: Do not export local variable ahci_em_messages libata: switch remaining drivers to use dma_set_mask_and_coherent sata_sil24: use dma_set_mask_and_coherent sata_qstor: use dma_set_mask_and_coherent sata_nv: use dma_set_mask_and_coherent sata_mv: use dma_set_mask_and_coherent pdc_adma: use dma_set_mask_and_coherent ahci: use dma_set_mask_and_coherent acard_ahci: use dma_set_mask_and_coherent ata/pata_buddha: Probe via modalias instead of initcall
2019-09-17Merge tag 'for-5.4/io_uring-2019-09-15' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring updates from Jens Axboe: - Allocate SQ/CQ ring together, more efficient. Expose this through a feature flag as well, so we can reduce the number of mmaps by 1 (Hristo and me) - Fix for sequence logic with SQ thread (Jackie). - Add support for links with drain commands (Jackie). - Improved async merging (me) - Improved buffered async write performance (me) - Support SQ poll wakeup + event get in single io_uring_enter() (me) - Support larger SQ ring size. For epoll conversions, the 4k limit was too small for some prod workloads (Daniel). - put_user_page() usage (John) * tag 'for-5.4/io_uring-2019-09-15' of git://git.kernel.dk/linux-block: io_uring: increase IORING_MAX_ENTRIES to 32K io_uring: make sqpoll wakeup possible with getevents io_uring: extend async work merging io_uring: limit parallelism of buffered writes io_uring: add io_queue_async_work() helper io_uring: optimize submit_and_wait API io_uring: add support for link with drain io_uring: fix wrong sequence setting logic io_uring: expose single mmap capability io_uring: allocate the two rings together fs/io_uring.c: convert put_page() to put_user_page*()
2019-09-17Merge tag 'docs-5.4' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "It's a somewhat calmer cycle for docs this time, as the churn of the mass RST conversion is happily mostly behind us. - A new document on reproducible builds. - We finally got around to zapping the documentation for hardware support that was removed in 2004; one doesn't want to rush these things. - The usual assortment of fixes, typo corrections, etc" * tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits) Documentation: kbuild: Add document about reproducible builds docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi] Documentation: Add "earlycon=sbi" to the admin guide doc:lock: remove reference to clever use of read-write lock devices.txt: improve entry for comedi (char major 98) docs: mtd: Update spi nor reference driver doc: arm64: fix grammar dtb placed in no attributes region Documentation: sysrq: don't recommend 'S' 'U' before 'B' mailmap: Update email address for Quentin Perret docs: ftrace: clarify when tracing is disabled by the trace file docs: process: fix broken link Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command Documentation/arm/sa1100: Remove some obsolete documentation docs/zh_CN: update Chinese howto.rst for latexdocs making Documentation: virt: Fix broken reference to virt tree's index docs: Fix typo on pull requests guide kernel-doc: Allow anonymous enum Documentation: sphinx: Don't parse socket() as identifier reference Documentation: sphinx: Add missing comma to list of strings ...
2019-09-17Merge branch 'for-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Pull percpu updates from Dennis Zhou: "A couple of updates to clean up the code with no change in behavior" * 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: Use struct_size() helper percpu: fix typo in pcpu_setup_first_chunk() comment percpu: Make pcpu_setup_first_chunk() void function
2019-09-17Merge branch 'for-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Three minor cleanup patches" * 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: Use kvmalloc in cgroups-v1 cgroup: minor tweak for logic to get cgroup css cgroup: Replace a seq_printf() call by seq_puts() in cgroup_print_ss_mask()
2019-09-17rpmsg: glink-smem: Name the edge based on parent remoteprocBjorn Andersson
Naming the glink edge device on the parent of_node short name causes collisions when multiple remoteproc instances with only different unit address are described on the platform_bus in DeviceTree. Base the edge's name on the parent remoteproc's name instead, to ensure that it's unique. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-09-17Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Pull in bug fixes from 'net' tree for the merge window. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-17Merge tag 'asm-generic-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "Here are three small cleanup patches for the include/asm-generic directory. Christoph removes the __ioremap as part of a cleanup, Nico improves the constant do_div() optimization, and Denis changes BUG_ON() to be consistent with other implementations" * tag 'asm-generic-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: add unlikely to default BUG_ON(x) __div64_const32(): improve the generic C version asm-generic: don't provide __ioremap
2019-09-17Merge tag 'xtensa-20190917' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull Xtensa updates from Max Filippov: - add support for xtensa call0 ABI in userspace - update xtensa virt board DTS for PCI root complex in KIO range - remove free_initrd_mem * tag 'xtensa-20190917' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: virt: move PCI root complex to KIO range xtensa: add support for call0 ABI in userspace xtensa: clean up PS_WOE_BIT usage xtensa: remove free_initrd_mem
2019-09-17Merge tag 's390-5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for IBM z15 machines. - Add SHA3 and CCA AES cipher key support in zcrypt and pkey refactoring. - Move to arch_stack_walk infrastructure for the stack unwinder. - Various kasan fixes and improvements. - Various command line parsing fixes. - Improve decompressor phase debuggability. - Lift no bss usage restriction for the early code. - Use refcount_t for reference counters for couple of places in mm code. - Logging improvements and return code fix in vfio-ccw code. - Couple of zpci fixes and minor refactoring. - Remove some outdated documentation. - Fix secure boot detection. - Other various minor code clean ups. * tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits) s390: remove pointless drivers-y in drivers/s390/Makefile s390/cpum_sf: Fix line length and format string s390/pci: fix MSI message data s390: add support for IBM z15 machines s390/crypto: Support for SHA3 via CPACF (MSA6) s390/startup: add pgm check info printing s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding vfio-ccw: fix error return code in vfio_ccw_sch_init() s390: vfio-ap: fix warning reset not completed s390/base: remove unused s390_base_mcck_handler s390/sclp: Fix bit checked for has_sipl s390/zcrypt: fix wrong handling of cca cipher keygenflags s390/kasan: add kdump support s390/setup: avoid using strncmp with hardcoded length s390/sclp: avoid using strncmp with hardcoded length s390/module: avoid using strncmp with hardcoded length s390/pci: avoid using strncmp with hardcoded length s390/kaslr: reserve memory for kasan usage s390/mem_detect: provide single get_mem_detect_end s390/cmma: reuse kstrtobool for option value parsing ...
2019-09-17f2fs: add a condition to detect overflow in f2fs_ioc_gc_range()Sahitya Tummala
end = range.start + range.len; If the range.start/range.len is a very large value, then end can overflow in this operation. It results into a crash in get_valid_blocks() when accessing the invalid range.start segno. This issue is reported in ioctl fuzz testing. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-09-17Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC updates from Stafford Horne: "Few small things for 5.4: - Fixup ethoc ethernet device tree descriptors which were previously broken, now ethernet works on FPGAs running OpenRISC! - Switch ioremap to use uncached semantics - from Christoph Hellwig" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: map as uncached in ioremap or1k: dts: Add ethoc device to SMP devicetree or1k: dts: Fix ethoc network configuration in or1ksim devicetree
2019-09-17Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fix from Greg Ungerer: "Only a single change, fix up header include in ColdFire specific GPIO handling code" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: coldfire: Include the GPIO driver header
2019-09-17clk: Make clk_bulk_get_all() return a valid "id"Bjorn Andersson
The adreno driver expects the "id" field of the returned clk_bulk_data to be filled in with strings from the clock-names property. But due to the use of kmalloc_array() in of_clk_bulk_get_all() it receives a list of bogus pointers instead. Zero-initialize the "id" field and attempt to populate with strings from the clock-names property to resolve both these issues. Fixes: 616e45df7c4a ("clk: add new APIs to operate on all available clocks") Fixes: 8e3e791d20d2 ("drm/msm: Use generic bulk clock function") Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lkml.kernel.org/r/20190913024029.2640-1-bjorn.andersson@linaro.org Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17clk: actions: Fix factor clk struct member accessManivannan Sadhasivam
Since the helper "owl_factor_helper_round_rate" is shared between factor and composite clocks, using the factor clk specific helper function like "hw_to_owl_factor" to access its members will create issues when called from composite clk specific code. Hence, pass the "factor_hw" struct pointer directly instead of fetching it using factor clk specific helpers. This issue has been observed when a composite clock like "sd0_clk" tried to call "owl_factor_helper_round_rate" resulting in pointer dereferencing error. While we are at it, let's rename the "clk_val_best" function to "owl_clk_val_best" since this is an owl SoCs specific helper. Fixes: 4bb78fc9744a ("clk: actions: Add factor clock support") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190916154546.24982-2-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core timer updates from Thomas Gleixner: "Timers and timekeeping updates: - A large overhaul of the posix CPU timer code which is a preparation for moving the CPU timer expiry out into task work so it can be properly accounted on the task/process. An update to the bogus permission checks will come later during the merge window as feedback was not complete before heading of for travel. - Switch the timerqueue code to use cached rbtrees and get rid of the homebrewn caching of the leftmost node. - Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a single function - Implement the separation of hrtimers to be forced to expire in hard interrupt context even when PREEMPT_RT is enabled and mark the affected timers accordingly. - Implement a mechanism for hrtimers and the timer wheel to protect RT against priority inversion and live lock issues when a (hr)timer which should be canceled is currently executing the callback. Instead of infinitely spinning, the task which tries to cancel the timer blocks on a per cpu base expiry lock which is held and released by the (hr)timer expiry code. - Enable the Hyper-V TSC page based sched_clock for Hyper-V guests resulting in faster access to timekeeping functions. - Updates to various clocksource/clockevent drivers and their device tree bindings. - The usual small improvements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits) posix-cpu-timers: Fix permission check regression posix-cpu-timers: Always clear head pointer on dequeue hrtimer: Add a missing bracket and hide `migration_base' on !SMP posix-cpu-timers: Make expiry_active check actually work correctly posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build tick: Mark sched_timer to expire in hard interrupt context hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n posix-cpu-timers: Utilize timerqueue for storage posix-cpu-timers: Move state tracking to struct posix_cputimers posix-cpu-timers: Deduplicate rlimit handling posix-cpu-timers: Remove pointless comparisons posix-cpu-timers: Get rid of 64bit divisions posix-cpu-timers: Consolidate timer expiry further posix-cpu-timers: Get rid of zero checks rlimit: Rewrite non-sensical RLIMIT_CPU comment posix-cpu-timers: Respect INFINITY for hard RTTIME limit posix-cpu-timers: Switch thread group sampling to array posix-cpu-timers: Restructure expiry array posix-cpu-timers: Remove cputime_expires ...
2019-09-17Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Thomas Gleixner: - Cleanup the apic IPI implementation by removing duplicated code and consolidating the functions into the APIC core. - Implement a safe variant of the IPI broadcast mode. Contrary to earlier attempts this uses the core tracking of which CPUs have been brought online at least once so that a broadcast does not end up in some dead end in BIOS/SMM code when the CPU is still waiting for init. Once all CPUs have been brought up once, IPI broadcasting is enabled. Before that regular one by one IPIs are issued. - Drop the paravirt CR8 related functions as they have no user anymore - Initialize the APIC TPR to block interrupt 16-31 as they are reserved for CPU exceptions and should never be raised by any well behaving device. - Emit a warning when vector space exhaustion breaks the admin set affinity of an interrupt. - Make sure to use the NMI fallback when shutdown via reboot vector IPI fails. The original code had conditions which prevent the code path to be reached. - Annotate various APIC config variables as RO after init. [ The ipi broadcase change came in earlier through the cpu hotplug branch, but I left the explanation in the commit message since it was shared between the two different branches - Linus ] * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) x86/apic/vector: Warn when vector space exhaustion breaks affinity x86/apic: Annotate global config variables as "read-only after init" x86/apic/x2apic: Implement IPI shorthands support x86/apic/flat64: Remove the IPI shorthand decision logic x86/apic: Share common IPI helpers x86/apic: Remove the shorthand decision logic x86/smp: Enhance native_send_call_func_ipi() x86/smp: Move smp_function_call implementations into IPI code x86/apic: Provide and use helper for send_IPI_allbutself() x86/apic: Add static key to Control IPI shorthands x86/apic: Move no_ipi_broadcast() out of 32bit x86/apic: Add NMI_VECTOR wait to IPI shorthand x86/apic: Remove dest argument from __default_send_IPI_shortcut() x86/hotplug: Silence APIC and NMI when CPU is dead x86/cpu: Move arch_smt_update() to a neutral place x86/apic/uv: Make x2apic_extra_bits static x86/apic: Consolidate the apic local headers x86/apic: Move apic_flat_64 header into apic directory x86/apic: Move ipi header into apic directory x86/apic: Cleanup the include maze ...
2019-09-17Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core irq updates from Thomas Gleixner: "Updates from the irq departement: - Update the interrupt spreading code so it handles numa node with different CPU counts properly. - A large overhaul of the ARM GiCv3 driver to support new PPI and SPI ranges. - Conversion of all alloc_fwnode() users to use physical addresses instead of virtual addresses so the virtual addresses are not leaked. The physical address is sufficient to identify the associated interrupt chip. - Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips. - Enforce interrupt threading at compile time if RT is enabled. - Small updates and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices irqchip/uniphier-aidet: Use devm_platform_ioremap_resource() irqdomain: Add the missing assignment of domain->fwnode for named fwnode irqchip/mmp: Coexist with GIC root IRQ controller irqchip/mmp: Mask off interrupts from other cores irqchip/mmp: Add missing chained_irq_{enter,exit}() irqchip/mmp: Do not use of_address_to_resource() to get mux regs irqchip/meson-gpio: Add support for meson sm1 SoCs dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs genirq/affinity: Remove const qualifier from node_to_cpumask argument genirq/affinity: Spread vectors on node according to nr_cpu ratio genirq/affinity: Improve __irq_build_affinity_masks() irqchip: Remove dev_err() usage after platform_get_irq() irqchip: Add include guard to irq-partition-percpu.h irqchip/mmp: Do not call irq_set_default_host() on DT platforms irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803 irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks irqchip/gic-v3: Warn about inconsistent implementations of extended ranges irqchip/gic-v3: Add EPPI range support ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:22:48 +0000