summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-30be2net: fixup log messagesSathya Perla
Added and modified a few log messages mostly in probe path. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30be2net: cleanup code related to be_link_status_query()Sathya Perla
1) link_status_query() is always called to query the link-speed (speed after applying qos). When there is no qos setting, link-speed is derived from port-speed. Do all this inside this routine and hide this from the callers. 2) adpater->phy.forced_port_speed is not being set anywhere after being initialized. Get rid of this variable. 3) Ignore async link_speed notifications till the initial value has been fetched from FW. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30be2net: fix wrong handling of be_setup() failure in be_probe()Sathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30be2net: remove type argument of be_cmd_mac_addr_query()Sathya Perla
All invocations of this routine use the same type value. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Disable multiple TX rings by default due to hardware flawMichael Chan
Simple round-robin hardware TX scheduling can cause starvation of TX rings with small packets when other TX rings have large TSO or jumbo packets. In the simplest case, consider 2 TCP streams running in opposite directions. The TSO TX traffic will hash to one ring and the ACKs for the incoming data on a different TCP connection will hash to a different TX ring. The hardware fetches one complete TSO packet (up to 64K data) before servicing the other TX ring. When it gets to the other TX ring, it will only fetch one packet (64-byte ACK packet in this case). After that, it will switch back to the 1st ring filled with more TSO packets. Because only one ACK can go out roughly every 500 usec in this case, the incoming data rate becomes very low. Update version to 3.125. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Add support for ethtool -L|-l to get/set the number of rings.Michael Chan
Default remains the same. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Refactor tg3_close()Michael Chan
by introducing tg3_stop() that does the opposite of tg3_start(). This function will be useful when adding the support for changing the numbe of rx and tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Refactor tg3_open()Michael Chan
by introducing tg3_start() that handles all initialization steps from IRQ allocation. This function will be needed when adding support for changing the number of rx and tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Separate coalescing setup for rx and txMichael Chan
since the number of rings can be different. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Allow number of rx and tx rings to be set independently.Michael Chan
irq_cnt is no longer necessarily equal to the number rx or tx rings. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-30tg3: Introduce separate functions to allocate/free RX/TX rings.Michael Chan
This is preparation work to allow the number of RX and TX rings to be configured separately. Reviewed-by: Nithin Nayak Sujir <nsujir@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-29vfs: dcache: fix deadlock in tree traversalMiklos Szeredi
IBM reported a deadlock in select_parent(). This was found to be caused by taking rename_lock when already locked when restarting the tree traversal. There are two cases when the traversal needs to be restarted: 1) concurrent d_move(); this can only happen when not already locked, since taking rename_lock protects against concurrent d_move(). 2) racing with final d_put() on child just at the moment of ascending to parent; rename_lock doesn't protect against this rare race, so it can happen when already locked. Because of case 2, we need to be able to handle restarting the traversal when rename_lock is already held. This patch fixes all three callers of try_to_ascend(). IBM reported that the deadlock is gone with this patch. [ I rewrote the patch to be smaller and just do the "goto again" if the lock was already held, but credit goes to Miklos for the real work. - Linus ] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-29ARM: add v7 multi-platform defconfigRob Herring
Add a v7 defconfig enabling highbank, socfpga, mvebu, and vexpress platforms and their drivers. Most other options are left to the default. The existing individual platform defconfigs are kept for now as they are a bit different. In some cases, the choices look pretty arbitrary and just copied from other defconfigs. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-29Merge tag 'ep93xx-fixes-for-3.7' of git://github.com/RyanMallon/linux-ep93xx ↵Olof Johansson
into next/fixes-non-critical From Ryan Mallon: * tag 'ep93xx-fixes-for-3.7' of git://github.com/RyanMallon/linux-ep93xx: ARM: ep93xx: Move ts72xx.h out of include/mach ARM: ep93xx: use __iomem pointers for MMIO ARM: ep93xx: Fix build error due to 'SZ_32M' undeclared
2012-09-29Merge branch 'lpc32xx/core' of git://git.antcom.de/linux-2.6 into next/socOlof Johansson
From Roland Stigge, three more updates to lpc32xx. * 'lpc32xx/core' of git://git.antcom.de/linux-2.6: ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup
2012-09-29Merge branch 'lpc32xx/dts' of git://git.antcom.de/linux-2.6 into next/dtOlof Johansson
From Roland Stigge. Pulling in one bugfix to the lpc32xx DT conversion. * 'lpc32xx/dts' of git://git.antcom.de/linux-2.6: ARM: LPC32xx: LED fix in PHY3250 DTS file
2012-09-29Merge branch 'vt8500/devel' into next/dtOlof Johansson
Picked up one more bugfix by Tony Prisk: * vt8500/devel: arm: vt8500: Fixup for missing gpio.h
2012-09-29arm: vt8500: Fixup for missing gpio.hTony Prisk
mach/include/gpio.h was removed as part of the multiplatform-3.7 update. This patch removes the include from arch-vt8500/vt8500.c Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-29Merge tag 'omap-devel-board-late-v3-for-v3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: These board and platform related patches have been posted quite a while ago but have somehow fallen though the cracks as most of the focus has been making things to work with device tree. As the first patch depends on sparse IRQ related removal of irqs.h and related header moves, these are based on omap-cleanup-local-headers-for-v3.7 tag. * tag 'omap-devel-board-late-v3-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
2012-09-29Merge tag 'devel-dt-arch-timer-for-v3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren: Few late patches to enable arch timer for omap5 using device tree. * tag 'devel-dt-arch-timer-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP5: Enable arch timer support ARM: OMAP: Add initialisation for the real-time counter.
2012-09-29efi: Fix the ACPI BGRT driver for images located in EFI boot services memoryJosh Triplett
The ACPI BGRT driver accesses the BIOS logo image when it initializes. However, ACPI 5.0 (which introduces the BGRT) recommends putting the logo image in EFI boot services memory, so that the OS can reclaim that memory. Production systems follow this recommendation, breaking the ACPI BGRT driver. Move the bulk of the BGRT code to run during a new EFI late initialization phase, which occurs after switching EFI to virtual mode, and after initializing ACPI, but before freeing boot services memory. Copy the BIOS logo image to kernel memory at that point, and make it accessible to the BGRT driver. Rework the existing ACPI BGRT driver to act as a simple wrapper exposing that image (and the properties from the BGRT) via sysfs. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: http://lkml.kernel.org/r/93ce9f823f1c1f3bb88bdd662cce08eee7a17f5d.1348876882.git.josh@joshtriplett.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-29efi: Add a function to look up existing IO memory mappingsJosh Triplett
The EFI initialization creates virtual mappings for EFI boot services memory, so if a driver wants to access EFI boot services memory, it cannot call ioremap itself; doing so will trip the WARN about mapping RAM twice. Thus, a driver accessing EFI boot services memory must do so via the existing mapping already created during EFI intiialization. Since the EFI code already maintains a memory map for that memory, add a function efi_lookup_mapped_addr to look up mappings in that memory map. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: http://lkml.kernel.org/r/0eb48ae012797912874919110660ad420b90268b.1348876882.git.josh@joshtriplett.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-29efi: Defer freeing boot services memory until after ACPI initJosh Triplett
Some new ACPI 5.0 tables reference resources stored in boot services memory, so keep that memory around until we have ACPI and can extract data from it. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: http://lkml.kernel.org/r/baaa6d44bdc4eb0c58e5d1b4ccd2c729f854ac55.1348876882.git.josh@joshtriplett.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-29Merge branch 'dt2' of git://github.com/hzhuang1/linux into next/dtOlof Johansson
From Haojian Zhuang: * 'dt2' of git://github.com/hzhuang1/linux: ARM: dt: mmp-dma: add binding file
2012-09-29Merge branch 'next/dt-samsung-new' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt2 From Kukjin Kim: * 'next/dt-samsung-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add nodes for dw_mmc controllers for Samsung EXYNOS5250 platforms ARM: EXYNOS: Add AUXDATA support for MSHC controllers ARM: EXYNOS: Add support for MSHC controller clocks ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen ARM: dts: use uart2 for console on smdkv310 and smdk5250 ARM: dts: Add basic dts file for Samsung Trats board ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4 ARM: dts: Assume status of all optional nodes as disabled for exynos4 ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to exynos4.dtsi
2012-09-29Merge branch 'samsung/pinctrl' into next/dt2Olof Johansson
* samsung/pinctrl: pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used gpio: exynos4: skip gpiolib registration if pinctrl driver is used pinctrl: add exynos4210 specific extensions for samsung pinctrl driver pinctrl: add samsung pinctrl and gpiolib driver
2012-09-29Merge branch 'samsung/boards' into next/dt2Olof Johansson
* samsung/boards: ARM: EXYNOS: Add generic PWM lookup support for SMDKV310 ARM: EXYNOS: Add generic PWM lookup support for SMDK4X12 ARM: EXYNOS: Use generic pwm driver in Origen board ARM: dts: Add heartbeat gpio-leds support to Origen ARM: dts: Use active low flag for gpio-keys on Origen ARM: S3C64XX: Register audio platform devices for Bells on Cragganmore ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore Add/add conflict in arch/arm/mach-exynos/mach-smdkv310.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-29Merge tag 'iommu-fixes-v3.6-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Two small patches: * One patch to fix the function declarations for !CONFIG_IOMMU_API. This is causing build errors in linux-next and should be fixed for v3.6. * Another patch to fix an IOMMU group related NULL pointer dereference." * tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix wrong assumption in iommu-group specific code iommu: static inline iommu group stub functions
2012-09-29Merge git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds
Pull NVMe driver fixes from Matthew Wilcox: "Now that actual hardware has been released (don't have any yet myself), people are starting to want some of these fixes merged." Willy doesn't have hardware? Guys... * git://git.infradead.org/users/willy/linux-nvme: NVMe: Cancel outstanding IOs on queue deletion NVMe: Free admin queue memory on initialisation failure NVMe: Use ida for nvme device instance NVMe: Fix whitespace damage in nvme_init NVMe: handle allocation failure in nvme_map_user_pages() NVMe: Fix uninitialized iod compiler warning NVMe: Do not set IO queue depth beyond device max NVMe: Set block queue max sectors NVMe: use namespace id for nvme_get_features NVMe: replace nvme_ns with nvme_dev for user admin NVMe: Fix nvme module init when nvme_major is set NVMe: Set request queue logical block size
2012-09-29Merge tag 'please-pull-naveen' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras into x86/mce Pull MCE updates from Tony Luck: "Option to let the bios set per-bank CMCI thresholds so they can filter noisy error sources at a fine grained level based on platform specific knowledge." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-28ipv6: return errno pointers consistently for fib6_add_1()Lin Ming
fib6_add_1() should consistently return errno pointers, rather than a mixture of NULL and errno pointers. Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller
Marc Kleine-Budde says: ==================== this pull request is for net-next, for the v3.7 release cycle. AnilKumar Ch contributed a fix for a segfault in the c_can driver, which is triggered by an earlier commit [1] in net-next (so no backport is needed). ... [1] 4cdd34b can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc75xx: add wol magic packet supportSteve Glendinning
This patch enables wake from system suspend on magic packet. Patch updated to change BUG_ON to WARN_ON_ONCE. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc75xx: enable power saving mode during system suspendSteve Glendinning
This patch instructs the device to enter its lowest power SUSPEND2 state during system suspend. This patch also explicitly wakes the device after resume, which should address reports of the device not automatically coming back after system suspend: Patch updated to change BUG_ON to WARN_ON_ONCE. http://code.google.com/p/chromium-os/issues/detail?id=31871 Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc75xx: add explicit test that device is READYSteve Glendinning
This patch adds an explicit test that the READY bit is set on the device when attempting to initialize it. If this bit is clear then the device hasn't succesfully started all its clocks, and this patch helps make the resulting logged error more helpful. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: add wol magic packet supportSteve Glendinning
This patch enables wake from system suspend on magic packet. Patch updated to replace BUG_ON with WARN_ON_ONCE and return. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: enable power saving mode during system suspendSteve Glendinning
This patch enables the device to enter its lowest power SUSPEND2 state during system suspend, instead of staying up using full power. Patch updated to not add two pointers to .suspend & .resume. Patch updated to replace BUG_ON with WARN_ON_ONCE and return. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: fix resume when usb device is resetSteve Glendinning
This patch fixes an issue on some systems, where after suspend the link is re-established but the ethernet interface does not resume. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: check return code from control messagesSteve Glendinning
This patch adds additional checks of the values returned by smsc95xx_(read|write)_reg, and wraps their common patterns in macros. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: remove unnecessary variablesSteve Glendinning
Removes unnecessary variables as smsc95xx_write_reg takes its value by parameter. Early versions passed this parameter by reference. Also replace hardcoded interrupt status value with a #define Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28smsc95xx: sleep before read for lengthy operationsSteve Glendinning
During init, the device reset is unexpected to complete immediately, so sleep before testing the condition rather than after it. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28cifs: obtain file access during backup intent lookup (resend)Shirish Pargaonkar
Rebased and resending the patch. Path based queries can fail for lack of access, especially during lookup during open. open itself would actually succeed becasue of back up intent bit but queries (either path or file handle based) do not have a means to specifiy backup intent bit. So query the file info during lookup using trans2 / findfirst / file_id_full_dir_info to obtain file info as well as file_id/inode value. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-28ARM: nomadik: remove NAND_NO_READRDY useArnd Bergmann
The nhk8815 board files uses NAND_NO_READRDY in its platform data, but this macro is getting removed because it was not being used anywhere. Without this patch, building nhk8815_defconfig results in: arch/arm/mach-nomadik/board-nhk8815.c:118:6: error: 'NAND_NO_READRDY' undeclared here (not in a function) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-28sparc64: Fix trailing whitespace in NG4 memcpy.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge branch 'cleanup/__iomem' into next/cleanup2Arnd Bergmann
* cleanup/__iomem: ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses. ARM: ux500: use __iomem pointers for MMIO Two new cleanup patches that were not already part of the first cleanup branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses.Andrew Lunn
Also convert logical or to + for register offsets from base addresses. This fixes a number of warnings currently seen in linux-next: warning: passing argument 2 of '__raw_writeb' makes pointer from interger without cast. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28ARM: ux500: use __iomem pointers for MMIOArnd Bergmann
In the earlier sweeping changes, the ux500 uncompress.h file was missed because other problems were hiding this one. Without this patch, building u8500_defconfig results in: In file included from arch/arm/boot/compressed/misc.c:33:0: arch/arm/mach-ux500/include/mach/uncompress.h: In function 'putc': arch/arm/mach-ux500/include/mach/uncompress.h:32:2: warning: passing argument 1 of '__raw_readb' makes pointer from integer without a cast [enabled by default] arch/arm/include/asm/io.h:95:89: note: expected 'const volatile void *' but argument is of type 'u32' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-28ARM: shmobile: add new __iomem annotation for new codeArnd Bergmann
While we fixed up all instances that were already present in v3.6, this one came in through new code. Without this patch, building kzm9g_defconfig results in: arch/arm/mach-shmobile/board-kzm9g.c: In function 'kzm9g_restart': arch/arm/mach-shmobile/board-kzm9g.c:781:2: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast [enabled by default] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Cc: Simon Horman <horms@verge.net.au>
2012-09-28Merge branch 'bcmring/removal' into next/multiplatformArnd Bergmann
The removal of bcmring has non-obvious commits with the way the multiplatform configuration works, so merge it in here. Conflicts: arch/arm/Kconfig arch/arm/Makefile arch/arm/mach-bcmring/arch.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-28Merge branch 'bcmring/removal' into next/cleanup2Arnd Bergmann
From "Christian Daudt" <csd@broadcom.com>: Remove mach-bcmring as this is no longer maintained or used. Updated the removal with: - drop the edit to mach-types requested by Russell King - eliminate defconfig mod from patch 1 requested Olof Johansson Also switched to using git send-email to avoid word-wrapping problems * bcmring/removal: ARM: Remove mach-bcmring Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:54:38 +0000