| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We'll need more info from rocker_port than just pport when we age out fdb
entries, so store rocker_port rather than pport in each fdb entry.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The entry is touched once when created, and touched again for each update.
The touched time is used to calculate FDB entry age.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 7d82410950aa ("virtio: add explicit big-endian support to memory
accessors") accidentally changed the virtio_net header used by
AF_PACKET with PACKET_VNET_HDR from host-endian to big-endian.
Since virtio_legacy_is_little_endian() is a very long identifier,
define a vio_le macro and use that throughout the code instead of the
hard-coded 'false' for little-endian.
This restores the ABI to match 4.1 and earlier kernels, and makes my
test program work again.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Drivers might call napi_disable while not holding the napi instance poll_lock.
In those instances, its possible for a race condition to exist between
poll_one_napi and napi_disable. That is to say, poll_one_napi only tests the
NAPI_STATE_SCHED bit to see if there is work to do during a poll, and as such
the following may happen:
CPU0 CPU1
ndo_tx_timeout napi_poll_dev
napi_disable poll_one_napi
test_and_set_bit (ret 0)
test_bit (ret 1)
reset adapter napi_poll_routine
If the adapter gets a tx timeout without a napi instance scheduled, its possible
for the adapter to think it has exclusive access to the hardware (as the napi
instance is now scheduled via the napi_disable call), while the netpoll code
thinks there is simply work to do. The result is parallel hardware access
leading to corrupt data structures in the driver, and a crash.
Additionaly, there is another, more critical race between netpoll and
napi_disable. The disabled napi state is actually identical to the scheduled
state for a given napi instance. The implication being that, if a napi instance
is disabled, a netconsole instance would see the napi state of the device as
having been scheduled, and poll it, likely while the driver was dong something
requiring exclusive access. In the case above, its fairly clear that not having
the rings in a state ready to be polled will cause any number of crashes.
The fix should be pretty easy. netpoll uses its own bit to indicate that that
the napi instance is in a state of being serviced by netpoll (NAPI_STATE_NPSVC).
We can just gate disabling on that bit as well as the sched bit. That should
prevent netpoll from conducting a napi poll if we convert its set bit to a
test_and_set_bit operation to provide mutual exclusion
Change notes:
V2)
Remove a trailing whtiespace
Resubmit with proper subject prefix
V3)
Clean up spacing nits
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: jmaxwell@redhat.com
Tested-by: jmaxwell@redhat.com
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
Minor cls_bpf updates
Some minor updates resp. follow-ups on cls_bpf, please see
individual patches for details. Will follow with the iproute2
patch after this series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jamal suggested to further limit the currently allowed subset of opcodes
that may be used by a direct action return code as the intention is not
to replace the full action engine, but rather to have a minimal set that
can be used in the fast-path on things like ingress for some features
that cls_bpf supports.
Classifiers can, of course, still be chained together that have direct
action mode with those that have a full exec pass. For more complex
scenarios that go beyond this minimal set here, the full tcf_exts_exec()
path must be used.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The binding to a particular classid was so far always mandatory for
cls_bpf, but it doesn't need to be. Therefore, lift this restriction
as similarly done in other classifiers.
Only a couple of qdiscs make use of class from the tcf_result, others
don't strictly care, so let the user choose his needs (those that read
out class can handle situations where it could be NULL).
An explicit check for tcf_unbind_filter() is also not needed here, as
the previous r->class was 0, so the xchg() will return that and
therefore a callback to the qdisc's unbind_tcf() is skipped.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit 43388da42a49 ("cls_bpf: introduce integrated actions") we
have added TCA_BPF_FLAGS. We can also retrieve this information from
the prog, dump it back to user space as well. It's useful in tc when
displaying/dumping filter info.
Also, remove tp from cls_bpf_prog_from_efd(), came in as a conflict
from a rebase and it's unused here (later work may add it along with
a real user).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michael Grzeschik says:
====================
ARCNET: refactoring and cleanup
This series cleans up the code in drivers/net/arcnet
and include/uapi/linux/if_arcnet.h . It doesn't change
the runtime behaviour of the code. Its only purpose
is to improve the code maintenance and readability.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similarly as already the case in bpf_redirect()/skb_do_redirect()
pair, let the stack deal with devs that are !IFF_UP.
dev_forward_skb() as well as dev_queue_xmit() will free the skb
and increment drop counter internally in such cases, so we can
spare the condition in bpf_clone_redirect().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RST packets sent on behalf of TCP connections with TS option (RFC 7323
TCP timestamps) have incorrect TS val (set to 0), but correct TS ecr.
A > B: Flags [S], seq 0, win 65535, options [mss 1000,nop,nop,TS val 100
ecr 0], length 0
B > A: Flags [S.], seq 2444755794, ack 1, win 28960, options [mss
1460,nop,nop,TS val 7264344 ecr 100], length 0
A > B: Flags [.], ack 1, win 65535, options [nop,nop,TS val 110 ecr
7264344], length 0
B > A: Flags [R.], seq 1, ack 1, win 28960, options [nop,nop,TS val 0
ecr 110], length 0
We need to call skb_mstamp_get() to get proper TS val,
derived from skb->skb_mstamp
Note that RFC 1323 was advocating to not send TS option in RST segment,
but RFC 7323 recommends the opposite :
Once TSopt has been successfully negotiated, that is both <SYN> and
<SYN,ACK> contain TSopt, the TSopt MUST be sent in every non-<RST>
segment for the duration of the connection, and SHOULD be sent in an
<RST> segment (see Section 5.2 for details)
Note this RFC recommends to send TS val = 0, but we believe it is
premature : We do not know if all TCP stacks are properly
handling the receive side :
When an <RST> segment is
received, it MUST NOT be subjected to the PAWS check by verifying an
acceptable value in SEG.TSval, and information from the Timestamps
option MUST NOT be used to update connection state information.
SEG.TSecr MAY be used to provide stricter <RST> acceptance checks.
In 5 years, if/when all TCP stack are RFC 7323 ready, we might consider
to decide to send TS val = 0, if it buys something.
Fixes: 7faee5c0d514 ("tcp: remove TCP_SKB_CB(skb)->when")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just adds the quirk for MSI R7 370 Armor 2X
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91294
Signed-off-by: Maxim Sheviakov <mrader3940@yandex.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In
commit 7a3f3d6667f5f9ffd1517f6b21d64bbf5312042c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:44:28 2015 +0200
drm: Check locking in drm_for_each_connector
I added locking checks to drm_for_each_connector but failed that
through drm_helper_connector_dpms -> drm_helper_choose_encoder_dpms
it's used in a few more places in the amdgpu resume/suspend code.
Fix them up.
Note that we could use the connector iterator macros in there too, but
that's for the future.
Port of radeon commit:
drm/radeon: Sprinkle drm_modeset_lock_all to appease locking checks
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In
commit 7a3f3d6667f5f9ffd1517f6b21d64bbf5312042c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:44:28 2015 +0200
drm: Check locking in drm_for_each_connector
I added locking checks to drm_for_each_connector but failed that
through drm_helper_connector_dpms -> drm_helper_choose_encoder_dpms
it's used in a few more places in the radeon resume/suspend code.
Fix them up.
Note that we could use the connector iterator macros in there too, but
that's for the future.
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
we used to adopt wait_reg_mem to let CE wait before DE finish page
updating, but from Tonga+, CE doesn't support wait_reg_mem package so
this logic no longer works.
so here is another approach to do same thing:
Insert two of SWITCH_BUFFER at both front and end of vm_flush can
guarantee that CE not go further to process IB_const before vm_flush
done.
Insert two of SWITCH_BUFFER also works on CI, so remove legency method
to sync CE and ME
v2:
Insert double SWITCH_BUFFER at front of vm flush as well.
Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
|
|
args->size is a u64. arg->pitch and args->height are u32. The
multiplication will overflow instead of using the high 32 bits as
intended.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is no limit on args->data.data_size_bytes so we could read beyond
the end of the args->data.data[] array.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The "alloc_size" calculation can overflow leading to memory corruption.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The amdgpu_cs_parser_init() function doesn't clean up after itself but
instead the caller uses a free everything function amdgpu_cs_parser_fini()
on failure. This style of error handling is often buggy. In this
example, we call "drm_free_large(parser->chunks[i].kdata);" when it is
an unintialized pointer or when "parser->chunks" is NULL.
I fixed this bug by adding unwind code so that it frees everything that
it allocates.
I also mode some other very minor changes:
1) Renamed "r" to "ret".
2) Moved the chunk_array allocation to the start of the function.
3) Removed some initializers which are no longer needed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The value was much too low, which could cause the userspace visible
vblank counter to move backwards when the hardware counter wrapped
around.
Ported from radeon commit:
b0b9bb4dd51f396dcf843831905f729e74b0c8c0
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The patch was generated using fixed coccinelle semantic patch
scripts/coccinelle/api/memdup.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2014320
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
User space passed the same handle before suspend and after resume,
so we have remove the session and handle destroy, and keep the
firmware untouched.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
|
|
Fixes suspend issues with UVD.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
|
|
Invalid messages can crash the hw otherwise
Ported from radeon commit a1b403da70e038ca6c6c6fe434d1d873546873a3
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
|
|
This causes problems with multiple suspend/resume cycles.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
|
|
Embed the scheduler into the ring structure instead of allocating it.
Use the ring name directly instead of the id.
v2: rebased, whitespace cleanup
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Chunming Zhou<david1.zhou@amd.com>
|
|
Move the fence related stuff into amdgpu_fence.c
v2: rework commit message, cause this is actually not a bug
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou<david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
|
|
Just to be consistent with the other members.
v2: rename the ring member as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> (v1)
Reviewed-by: Chunming Zhou<david1.zhou@amd.com>
|
|
Reorder the fields and properly return the kfifo_alloc error code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Chunming Zhou<david1.zhou@amd.com>
|
|
Use container_of rather than casting.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: David Zhou <david1.zhou@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
|
|
Use consistent naming across functions.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: David Zhou <david1.zhou@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
|
|
Reduces the locking and fencing overhead.
v2: add comment why we need the duplicates list in the GEM op.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
|
|
This allows for multiple BOs to have the same reservation object.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Adds an extra argument to amdgpu_bo_create, which is only used in amdgpu_prime.c.
Port of radeon commit 831b6966a60fe72d85ae3576056b4e4e0775b112.
v2: fix up kfd.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mem->start is a long, so this can overflow on 32bit systems.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Cc: stable@vger.kernel.org
|
|
Just free the resources immediately after submitting the job.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
|
|
And call the processed callback directly after submitting the job.
v2: split adding error handling into separate patch.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
|
|
Otherwise the resource blocked by it will never be reclaimed.
v2: add DRM_ERROR.
v3: fix typo in commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Chunming Zhou<david1.zhou@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
|
|
track sched job status like the length of job queue and hw job queue.
v2: fix build after rebase
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
|
|
Make sure the CP waits for the write to be confirmed before
invalidating.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Insert wait for reg mem after EOP to fix potential issue with vm context switch
v2: move wait to vm_flush() use equal instead of greater than.
Signed-off-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Provide module parameter to enable/disable them. Still
enabled by default.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In rt6_info_hash_nhsfn replace the custom hashing over flowi6 that is
using xor with a call to common function get_hash_from_flowi6.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
asoc-linus
|
|
'asoc/fix/pxa', 'asoc/fix/spear', 'asoc/fix/sti' and 'asoc/fix/wm0010' into asoc-linus
|
|
'asoc/fix/fsl-card', 'asoc/fix/fsl-ssi', 'asoc/fix/intel' and 'asoc/fix/maintainers' into asoc-linus
|
|
|
|
|
|
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
