summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-25drm/i915/display: conversion to new struct drm_device logging macros.Wambui Karuga
This patch converts various instances of the printk based logging macros in drm/i915/display/intel_display.c to the new struct drm_device based logging macros. In some instances, this involves extracting the struct drm_i915_private device from various intel types and using it in the macros. v2: use correct variable name in assignment over variable type. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200121214641.7262-1-wambui.karugax@gmail.com
2020-01-24drm/i915/guc: Don't GEM_BUG_ON on corrupted H2G CTBMichal Wajdeczko
We should never BUG_ON on any corruption in CTB descriptor as data there can be also modified by the GuC. Instead we can use flag "is_in_error" to indicate that we will not process any further messages over this CTB (until reset). Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200120191817.50164-1-michal.wajdeczko@intel.com
2020-01-24drm/i915/tgl: Re-enable RPSChris Wilson
We disabled rps while it appeared to be a contributing factor to system instablity, as that is now resolved, re-enable RPS and see how we fare. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135604.1402572-1-chris@chris-wilson.co.uk
2020-01-24drm/i915/gt: Poison GTT scratch pagesChris Wilson
Using a clear page for scratch means that we have relatively benign errors in case it is accidentally used, but that can be rather too benign for debugging. If we poison the scratch, ideally it quickly results in an obvious error. v2: Set each page individually just in case we are using highmem for our scratch page. v3: Pick a new scratch register as MI_STORE_REGISTER_MEM does not work with GPR0 on gen7, unbelievably. v4: Haswell still considers 3DPRIM a privileged register! Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200124115133.53360-1-chris@chris-wilson.co.uk
2020-01-24drm/i915/gt: Flush engine parking before releaseChris Wilson
Due to the asynchronous nature of releasing our wakerefs, we can signal the main GT wakeref as complete before the individual engines have cleared their own wakerefs. During shutdown we assert that the engines are indeed parked before we release them, but for this to be always true we need to flush their workers as well. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200124143339.140988-1-chris@chris-wilson.co.uk
2020-01-24drm/i915/ehl: Ensure that the DDI selection MUX is programmed correctlyVivek Kasireddy
Perhaps in some cases the BIOS/GOP or other firmware may turn on PHY A but may not program the MUX correctly. Therefore, re-program PHY A if it is determined after reading the VBT that the value programmed for the MUX bit does not match the expected value. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200121235848.8457-1-vivek.kasireddy@intel.com
2020-01-24drm/i915/dc3co: Avoid full modeset when EXITLINE needs to be changedJosé Roberto de Souza
A recent change in BSpec allow us to change EXTLINE while transcoder is enabled so this allow us to change it even when doing the first fastset after taking over previous hardware state set by BIOS. BIOS don't enable PSR, so if sink supports PSR it will be enabled on the first fastset, so moving the EXTLINE compute and set to PSR flows allow us to simplfy a bunch of code. This will save a lot of time in all the IGT tests that uses CRC, as when PSR2 is enabled CRCs are not generated, so we switch to PSR1, so the previous code would compute dc3co_exitline=0 causing a full modeset that would shutdown pipe, enable and train link. v2: only programming EXTLINE when DC3CO is enabled BSpec: 49196 Cc: Imre Deak <imre.deak@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200122182617.18597-2-jose.souza@intel.com
2020-01-24drm/i915/dc3co: Do the full calculation of DC3CO exit only onceJosé Roberto de Souza
This will calculaet the DC3CO exit delay only once per full modeset. Cc: Imre Deak <imre.deak@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200122182617.18597-1-jose.souza@intel.com
2020-01-24drm/i915/dsi: Ensure that the ACPI adapter lookup overrides the bus numVivek Kasireddy
Remove the i2c_bus_num >= 0 check from the adapter lookup function as this would prevent ACPI bus number override. This check was mainly there to return early if the bus number has already been found but we anyway return in the next line if the slave address does not match. Fixes: 8cbf89db2941 ("drm/i915/dsi: Parse the I2C element from the VBT MIPI sequence block (v3)") Cc: Hans de Goede <hdegoede@redhat.com> Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200118005848.20382-1-vivek.kasireddy@intel.com
2020-01-24drm/i915/acpi: Move the code to populate ACPI device ID into intel_acpiRajat Jain
Move the code that populates the ACPI device ID for devices, into more appripriate intel_acpi.c. This is done in preparation for more users of this code. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191220200353.252399-1-rajatja@google.com
2020-01-24drm/i915: Wait on vma activity before taking the mutexChris Wilson
Optimistically wait for the prior vma activity before taking the mutex to minimise the mutex hold time while unbinding. We will then verify the vma is idle with a second wait under the mutex to ensure it is safe to unbind. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123224459.38128-2-chris@chris-wilson.co.uk
2020-01-24drm/i915: Check activity on i915_vma after confirming pin_count==0Chris Wilson
Only assert that the i915_vma is now idle if and only if no other pins are present. If another user has the i915_vma pinned, they may submit more work to the i915_vma skipping the vm->mutex used to serialise the unbind. We need to wait again, if we want to continue and unbind this vma. However, if we own the i915_vma (we hold the vm->mutex for the unbind and the pin_count is 0), we can assert that the vma remains idle as we unbind. Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Closes: https://gitlab.freedesktop.org/drm/intel/issues/530 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123224459.38128-1-chris@chris-wilson.co.uk
2020-01-24drm/i915/gem: Prevent NULL pointer dereference on missing ctx->vmChris Wilson
If the ctx->vm is freed before we can acquire a local reference to it, we proceed to call i915_vm_put(NULL), which is invalid. Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: 5dbd2b7be61e ("drm/i915/gem: Convert vm idr to xarray") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Colin Ian King <colin.king@canonical.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123152602.1432282-1-chris@chris-wilson.co.uk
2020-01-24drm/i915/selftests: Show the RC6 residency on parking failureChris Wilson
Include the current RC6 residency counter in the error message, so that if we fail to park and manually enter RC6 we can see if the counter has a particularly suspect value (such as 0). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123145755.1420622-1-chris@chris-wilson.co.uk
2020-01-24drm/i915/gem: Detect overflow in calculating dumb buffer sizeChris Wilson
To multiply 2 u32 numbers to generate a u64 in C requires a bit of forewarning for the compiler. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123125934.1401755-1-chris@chris-wilson.co.uk
2020-01-23drm/i915/dp: Do not set master_trans bit in bitmak if INVALID_TRANSCODERManasi Navare
In the port sync mode, for the master crtc, the master_transcoder is INVALID. In that case since its value is -1, do not set the bit in the bitmask. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: d0eed1545fe7 ("drm/i915: Fix post-fastset modeset check for port sync") Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123002415.31478-1-manasi.d.navare@intel.com
2020-01-23drm/i915/cdclk: use new struct drm_device logging macrosWambui Karuga
Converts instances of the printk based debugging macros with the new struct drm_device based logging macros in i915/display/intel_cdclk.c. The conversion is achieved using the following coccinelle script that transforms based on the existence of a struct drm_i915_private device in the function: @rule1@ identifier fn, T; @@ fn(struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) ) ...+> } @rule2@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) ) ...+> } Resulting checkpatch warnings were fixed manually. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200121134559.17355-6-wambui.karugax@gmail.com
2020-01-23drm/i915/bw: convert to drm_device based logging macrosWambui Karuga
This replaces the printk based logging macros with the struct drm_based macros in i915/display/intel_bw.c This transformation was achieved by using the following coccinelle script that matches based on the existence of a struct drm_i915_private device in the functions: @rule1@ identifier fn, T; @@ fn(struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) ) ...+> } @rule2@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) ) ...+> } Resulting checkpatch warnings were addressed manually. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200121134559.17355-5-wambui.karugax@gmail.com
2020-01-23drm/i915/audio: convert to struct drm_device logging macros.Wambui Karuga
Converts the printk based logging macros in i915/display/intel_audio.c to the struct drm_device based logging macros. This transformation was achieved using the following coccinelle script that matches the existence of the struct drm_i915_private device: @rule1@ identifier fn, T; @@ fn(struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) ) ...+> } @rule2@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) ) ...+> } Checkpatch warnings were manually fixed. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200121134559.17355-4-wambui.karugax@gmail.com
2020-01-23drm/i915/bios: convert to struct drm_device logging macros.Wambui Karuga
This replaces the printk based logging macros with the struct drm_device based logging macros. This conversion was achieved using the following coccinelle script that transforms based on the existence of a struct drm_i915_private device: @rule1@ identifier fn, T; @@ fn(struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) ) ...+> } @rule2@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) ) ...+> } Formatting warnings by checkpatch are addressed manually. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200121134559.17355-3-wambui.karugax@gmail.com
2020-01-23drm/i915/atomic: use struct drm_device logging macrosWambui Karuga
Convert to the new struct drm_based logging macros to replace the printk based macros in i915/display/intel_atomic_plane.c. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200121134559.17355-2-wambui.karugax@gmail.com
2020-01-23drm/i915: add display engine uncore helpersJani Nikula
Add convenience helpers for the most common uncore operations with struct drm_i915_private * as context rather than struct intel_uncore *. The goal is to replace all instances of I915_READ(), I915_POSTING_READ(), I915_WRITE(), I915_READ_FW(), and I915_WRITE_FW() in display/ with these, to finally be able to get rid of the implicit dev_priv local parameter use. The idea is that any non-u32 reads or writes are special enough that they can use the intel_uncore_* functions directly. v2: - rename the file intel_de.h - move intel_de_wait_for_* there too - also add de fw helpers Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200121113915.9813-1-jani.nikula@intel.com
2020-01-23Merge branch 'linux-5.6' of git://github.com/skeggsb/linux into drm-nextDave Airlie
Just a couple of fixes to GP10x ACR support after the work, and a (fairly severe if you're running piglit a lot) memory leak fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv51mZaRuT5R=VhbKSTPzd15L4FbDiPQ+wsF+C23c_fOAQ@mail.gmail.com
2020-01-23Merge tag 'exynos-drm-next-for-v5.6' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Change Exynos DRM specific callback function names - it changes enable and disable callback functions names of struct exynos_drm_crtc_ops to atomic_enable and atomic_disable for consistency. Modify "EXYNOS" prefix to "Exynos" - "Exynos" name is a regular trademarked name promoted by its manufacturer, Samsung Electronics Co., Ltd.. This patch corrects the name. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1579567970-4467-1-git-send-email-inki.dae@samsung.com
2020-01-23Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux ↵Dave Airlie
into drm-next vmwgfx updates + new logging uapi https://patchwork.freedesktop.org/patch/349809/ is appropriate userpsace patch. Signed-off-by: Dave Airlie <airlied@redhat.com> From: =?UTF-8?q?Thomas=20Hellstr=C3=B6m=20=28VMware=29?= Link: https://patchwork.freedesktop.org/patch/msgid/20200116092934.5276-1-thomas_os@shipmail.org
2020-01-23drm/nouveau: fix build error without CONFIG_IOMMU_APIChen Zhou
If CONFIG_IOMMU_API is n, build fails: vers/gpu/drm/nouveau/nvkm/subdev/ltc/gp10b.c:37:9: error: implicit declaration of function dev_iommu_fwspec_get; did you mean iommu_fwspec_free? [-Werror=implicit-function-declaration] spec = dev_iommu_fwspec_get(device->dev); ^~~~~~~~~~~~~~~~~~~~ iommu_fwspec_free drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gp10b.c:37:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion] spec = dev_iommu_fwspec_get(device->dev); ^ drivers/gpu/drm/nouveau/nvkm/subdev/ltc/gp10b.c:39:17: error: struct iommu_fwspec has no member named ids u32 sid = spec->ids[0] & 0xffff; Seletc IOMMU_API under config DRM_NOUVEAU to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-23drm/nouveau/kms/nv04: remove set but not used variable 'width'YueHaibing
drivers/gpu/drm/nouveau/dispnv04/arb.c: In function nv04_calc_arb: drivers/gpu/drm/nouveau/dispnv04/arb.c:56:21: warning: variable width set but not used [-Wunused-but-set-variable] 'width' is never used, so remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-23drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'YueHaibing
drivers/gpu/drm/nouveau/dispnv50/disp.c: In function nv50_pior_enable: drivers/gpu/drm/nouveau/dispnv50/disp.c:1672:28: warning: variable nv_connector set but not used [-Wunused-but-set-variable] commit ac2d9275f371 ("drm/nouveau/kms/nv50-: Store the bpc we're using in nv50_head_atom") left behind this. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-23drm/nouveau/mmu: fix comptag memory leakBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-23drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbcThierry Reding
gp10b doesn't have all the registers that gp102_gr_zbc wants to access, which causes IBUS MMIO faults to occur. Avoid this by using the gp100 variants of grctx and gr_zbc. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-23drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrappingThierry Reding
The low-level Falcon bootstrapping callbacks are expected to return 0 on success or a negative error code on failure. However, the implementation on Tegra returns the ID or mask of the Falcons that were bootstrapped on success, thus breaking the calling code, which treats this as failure. Fix this by making sure we only return 0 or a negative error code, just like the code for discrete GPUs does. Fixes: 86ce2a71539c ("drm/nouveau/flcn/cmdq: move command generation to subdevs") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-22drm/amd/display: use odm combine for YCbCr420 timing with h_active greater ↵Wenjing Liu
than 4096 [why] FMT has limitation to support YCbCr420 with h_active greater than 4096. [how] Use odm combine to overcome the limitation. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: init hw i2c speedLewis Huang
[Why] Driver didn't init hw i2c speed cause hdcp hw cannot send command, because the default value of speed register is 0x2. [How] Restore the default speed when release i2c engine Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: changed max_downscale_src_width to 4096.Isabel Zhang
[Why] MPO isn't enabled on some 4k videos due to video source width is 4096 and the current limit is 3840. [How] Changed the limit to 4096. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: support VSC SDP update on video test pattern requestWenjing Liu
[why] MSA will be deprecated in the future. Need to support VSC during DP test automation. [how] Do not disable VSC during DP test automation. TODO - need to add VSC update on DM side on test request. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Check hw_init state when determining if DMCUB is initializedNicholas Kazlauskas
[Why] CW2 may already be programmed when coming back from S4. In this case we want to unconditionally replace whatever DMCUB version is currently enabled with the latest. [How] Check the hw_init flag to know whether or not we've previously executed the initliazed routine. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Reset inbox rptr/wptr when resetting DMCUBNicholas Kazlauskas
[Why] These logically make sense more to be set after the DMCUB has been reset rather than when we setup the inbox. [How] Move them into the reset callback. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Call ATOM_INIT instead of ATOM_ENABLE for DMCUBNicholas Kazlauskas
[Why] DMCUB command table doesn't support ATOM_ENABLE/ATOM_DISABLE anymore so we never end up calling the DCN init path in DMCUB. [How] Map ATOM_ENABLE to ATOM_INIT only for DMCUB command table offloading. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Add hardware reset interface for DMUB serviceNicholas Kazlauskas
[Why] We'll need this to perform a clean shutdown before unloading the driver. [How] It will call reset internally and set hw_init to false. It won't do anything if the hardware isn't initialized. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Fix update type for multiple planesRoman Li
[Why] determine_update_type_for_commit() uses pointers to single instance of local variable to fill scaling/color info for all planes updates. This is a bug, that leads to incorrect update type for commit in case of multiple planes per crtc. Each plane should refer to separate scaling/color data. [How] Use arrays for plane properties. Bundle all properties into a single structure to simplify memory allocation. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: fix rotation_angle to use enum valuesBrandon Syu
[Why] Hardcoded fixed values are not proper. [How] Use enum values instead of fixed numbers. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: 3.2.69Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Refine i2c frequency calculating sequenceLewis Huang
[Why] In HG mode, vbios didn't call DispController_Init to program NV1x XTAL_REF_DIV value when ASIC_INIT, but driver read XTAL_REF_DIV to calculate i2c reference frequency. it cause i2c frequency change from 100kHz to 200kHz. [How] remove get_speed function and calculate reference frequency at set_speed functiton. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Refactor to remove diags specific rgam funcAnthony Koo
[Why] It has duplicate code for building regamma curve [How] Remove the duplicate code and use the same function for building regamma Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Fix DML dummyinteger types mismatchJerry (Fangzhi) Zuo
[Why] The types for dummyinteger1 and dummyinteger2 are unsigned as part of the DML spec. They should not be long. [How] Make them unsigned int instead of long. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Do DMCUB hw_init before DCNicholas Kazlauskas
[Why] For DMCUB enabled hardware DC has a dependency on DMCUB already being running. Command table offloading will fail on first modeset if DMCUB isn't initialized first. [How] Perform DMCUB hardware initialization before DC. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Fixed comment stylingHaiyi Zhou
Switched to C-style comments for consistency Signed-off-by: Haiyi Zhou <haiyi.zhou@amd.com> Reviewed-by: Reza Amini <Reza.Amini@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: check pipe_ctx is split pipe or notPaul Hsieh
[Why] Driver use pipe_ctx to reallocate payload may cause allocate payload twice on same sink with split pipe. [How] Drvier must to check pipe_ctx is split pipe or not to avoid reallocate payload twice on same sink. Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Fallback to DMCUB when command table is missingNicholas Kazlauskas
[Why] If the command table isn't available then we can fallback to DMCUB offloading if it's enabled and available. [How] Instead of assigning NULL for supported command table functions we can fallback to the DMCUB when it's available. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Get fb base and fb offset for DMUB from registersNicholas Kazlauskas
[Why] Under some hardware initialization sequences the fb base/fb offset provided can be zero or hardwareinit can happen too late. We want to ensure that we always have the correct fb_base/fb_offset when performing DMCUB hardware initialization so we can do DMCUB command table offloading during first dc hardware init. [How] Read from the DCN registers. VBIOS already filled these in for us. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 22:29:04 +0000