| Age | Commit message (Collapse) | Author |
|---|
|
When memory is a little tight on my system, it's pretty easy to see
warnings that look like this.
ksoftirqd/0: page allocation failure: order:3, mode:0x40a20(GFP_ATOMIC|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
...
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x20/0x2c
dump_stack_lvl+0x60/0x78
dump_stack+0x18/0x38
warn_alloc+0x104/0x174
__alloc_pages+0x588/0x67c
alloc_rx_agg+0xa0/0x190 [r8152 ...]
r8152_poll+0x270/0x760 [r8152 ...]
__napi_poll+0x44/0x1ec
net_rx_action+0x100/0x300
__do_softirq+0xec/0x38c
run_ksoftirqd+0x38/0xec
smpboot_thread_fn+0xb8/0x248
kthread+0x134/0x154
ret_from_fork+0x10/0x20
On a fragmented system it's normal that order 3 allocations will
sometimes fail, especially atomic ones. The driver handles these
failures fine and the WARN just creates spam in the logs for this
case. The __GFP_NOWARN flag is exactly for this situation, so add it
to the allocation.
NOTE: my testing is on a 5.15 system, but there should be no reason
that this would be fundamentally different on a mainline kernel.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230406171411.1.I84dbef45786af440fd269b71e9436a96a8e7a152@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Any multiplication between GENMASK(31, 0) and a number bigger than 1
will be truncated because of the overflow, if the size of unsigned long
is 32 bits.
Replaced GENMASK with GENMASK_ULL to make sure that multiplication will
be between 64 bits values.
Cc: <stable@vger.kernel.org> # 5.15+
Fixes: 514def5dd339 ("phy: nxp-c45-tja11xx: add timestamping support")
Signed-off-by: Radu Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230406095953.75622-1-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
assume the following setup on a single machine:
1. An openvswitch instance with one bridge and default flows
2. two network namespaces "server" and "client"
3. two ovs interfaces "server" and "client" on the bridge
4. for each ovs interface a veth pair with a matching name and 32 rx and
tx queues
5. move the ends of the veth pairs to the respective network namespaces
6. assign ip addresses to each of the veth ends in the namespaces (needs
to be the same subnet)
7. start some http server on the server network namespace
8. test if a client in the client namespace can reach the http server
when following the actions below the host has a chance of getting a cpu
stuck in a infinite loop:
1. send a large amount of parallel requests to the http server (around
3000 curls should work)
2. in parallel delete the network namespace (do not delete interfaces or
stop the server, just kill the namespace)
there is a low chance that this will cause the below kernel cpu stuck
message. If this does not happen just retry.
Below there is also the output of bpftrace for the functions mentioned
in the output.
The series of events happening here is:
1. the network namespace is deleted calling
`unregister_netdevice_many_notify` somewhere in the process
2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and
then runs `synchronize_net`
3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER`
4. this is then handled by `dp_device_event` which calls
`ovs_netdev_detach_dev` (if a vport is found, which is the case for
the veth interface attached to ovs)
5. this removes the rx_handlers of the device but does not prevent
packages to be sent to the device
6. `dp_device_event` then queues the vport deletion to work in
background as a ovs_lock is needed that we do not hold in the
unregistration path
7. `unregister_netdevice_many_notify` continues to call
`netdev_unregister_kobject` which sets `real_num_tx_queues` to 0
8. port deletion continues (but details are not relevant for this issue)
9. at some future point the background task deletes the vport
If after 7. but before 9. a packet is send to the ovs vport (which is
not deleted at this point in time) which forwards it to the
`dev_queue_xmit` flow even though the device is unregistering.
In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is
a while loop (if the packet has a rx_queue recorded) that is infinite if
`dev->real_num_tx_queues` is zero.
To prevent this from happening we update `do_output` to handle devices
without carrier the same as if the device is not found (which would
be the code path after 9. is done).
Additionally we now produce a warning in `skb_tx_hash` if we will hit
the infinite loop.
bpftrace (first word is function name):
__dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2
ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2
netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 27, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 22, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 18, reg_state: 2
netdev_unregister_kobject: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
ovs_vport_send server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
__dev_queue_xmit server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
broken device server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024
ovs_dp_detach_port server: real_num_tx_queues: 0 cpu 9, pid: 9124, tid: 9124, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 33604, tid: 33604
stuck message:
watchdog: BUG: soft lockup - CPU#5 stuck for 26s! [curl:1929279]
Modules linked in: veth pktgen bridge stp llc ip_set_hash_net nft_counter xt_set nft_compat nf_tables ip_set_hash_ip ip_set nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 tls binfmt_misc nls_iso8859_1 input_leds joydev serio_raw dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua sch_fq_codel drm efi_pstore virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel virtio_net ahci net_failover crypto_simd cryptd psmouse libahci virtio_blk failover
CPU: 5 PID: 1929279 Comm: curl Not tainted 5.15.0-67-generic #74-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:netdev_pick_tx+0xf1/0x320
Code: 00 00 8d 48 ff 0f b7 c1 66 39 ca 0f 86 e9 01 00 00 45 0f b7 ff 41 39 c7 0f 87 5b 01 00 00 44 29 f8 41 39 c7 0f 87 4f 01 00 00 <eb> f2 0f 1f 44 00 00 49 8b 94 24 28 04 00 00 48 85 d2 0f 84 53 01
RSP: 0018:ffffb78b40298820 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff9c8773adc2e0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: ffff9c8773adc2e0 RDI: ffff9c870a25e000
RBP: ffffb78b40298858 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9c870a25e000
R13: ffff9c870a25e000 R14: ffff9c87fe043480 R15: 0000000000000000
FS: 00007f7b80008f00(0000) GS:ffff9c8e5f740000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b80f6a0b0 CR3: 0000000329d66000 CR4: 0000000000350ee0
Call Trace:
<IRQ>
netdev_core_pick_tx+0xa4/0xb0
__dev_queue_xmit+0xf8/0x510
? __bpf_prog_exit+0x1e/0x30
dev_queue_xmit+0x10/0x20
ovs_vport_send+0xad/0x170 [openvswitch]
do_output+0x59/0x180 [openvswitch]
do_execute_actions+0xa80/0xaa0 [openvswitch]
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? flow_lookup.constprop.0+0x5c/0x110 [openvswitch]
ovs_execute_actions+0x4c/0x120 [openvswitch]
ovs_dp_process_packet+0xa1/0x200 [openvswitch]
? ovs_ct_update_key.isra.0+0xa8/0x120 [openvswitch]
? ovs_ct_fill_key+0x1d/0x30 [openvswitch]
? ovs_flow_key_extract+0x2db/0x350 [openvswitch]
ovs_vport_receive+0x77/0xd0 [openvswitch]
? __htab_map_lookup_elem+0x4e/0x60
? bpf_prog_680e8aff8547aec1_kfree+0x3b/0x714
? trace_call_bpf+0xc8/0x150
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? kprobe_perf_func+0x4f/0x2b0
? __mod_memcg_lruvec_state+0x63/0xe0
netdev_port_receive+0xc4/0x180 [openvswitch]
? netdev_port_receive+0x180/0x180 [openvswitch]
netdev_frame_hook+0x1f/0x40 [openvswitch]
__netif_receive_skb_core.constprop.0+0x23d/0xf00
__netif_receive_skb_one_core+0x3f/0xa0
__netif_receive_skb+0x15/0x60
process_backlog+0x9e/0x170
__napi_poll+0x33/0x180
net_rx_action+0x126/0x280
? ttwu_do_activate+0x72/0xf0
__do_softirq+0xd9/0x2e7
? rcu_report_exp_cpu_mult+0x1b0/0x1b0
do_softirq+0x7d/0xb0
</IRQ>
<TASK>
__local_bh_enable_ip+0x54/0x60
ip_finish_output2+0x191/0x460
__ip_finish_output+0xb7/0x180
ip_finish_output+0x2e/0xc0
ip_output+0x78/0x100
? __ip_finish_output+0x180/0x180
ip_local_out+0x5e/0x70
__ip_queue_xmit+0x184/0x440
? tcp_syn_options+0x1f9/0x300
ip_queue_xmit+0x15/0x20
__tcp_transmit_skb+0x910/0x9c0
? __mod_memcg_state+0x44/0xa0
tcp_connect+0x437/0x4e0
? ktime_get_with_offset+0x60/0xf0
tcp_v4_connect+0x436/0x530
__inet_stream_connect+0xd4/0x3a0
? kprobe_perf_func+0x4f/0x2b0
? aa_sk_perm+0x43/0x1c0
inet_stream_connect+0x3b/0x60
__sys_connect_file+0x63/0x70
__sys_connect+0xa6/0xd0
? setfl+0x108/0x170
? do_fcntl+0xe8/0x5a0
__x64_sys_connect+0x18/0x20
do_syscall_64+0x5c/0xc0
? __x64_sys_fcntl+0xa9/0xd0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? do_syscall_64+0x69/0xc0
? __sys_setsockopt+0xea/0x1e0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? __x64_sys_setsockopt+0x1f/0x30
? do_syscall_64+0x69/0xc0
? irqentry_exit+0x1d/0x30
? exc_page_fault+0x89/0x170
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7f7b8101c6a7
Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34 24 89
RSP: 002b:00007ffffd6b2198 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b8101c6a7
RDX: 0000000000000010 RSI: 00007ffffd6b2360 RDI: 0000000000000005
RBP: 0000561f1370d560 R08: 00002795ad21d1ac R09: 0030312e302e302e
R10: 00007ffffd73f080 R11: 0000000000000246 R12: 0000561f1370c410
R13: 0000000000000000 R14: 0000000000000005 R15: 0000000000000000
</TASK>
Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action")
Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZC0pBXBAgh7c76CA@kernel-bug-kernel-bug
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-04-08
We've added 4 non-merge commits during the last 11 day(s) which contain
a total of 5 files changed, 39 insertions(+), 6 deletions(-).
The main changes are:
1) Fix BPF TCP socket iterator to use correct helper for dropping
socket's refcount, that is, sock_gen_put instead of sock_put,
from Martin KaFai Lau.
2) Fix a BTI exception splat in BPF trampoline-generated code on arm64,
from Xu Kuohai.
3) Fix a LongArch JIT error from missing BPF_NOSPEC no-op, from George Guo.
4) Fix dynamic XDP feature detection of veth in xdp_redirect selftest,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: fix xdp_redirect xdp-features selftest for veth driver
bpf, arm64: Fixed a BTI error on returning to patched function
LoongArch, bpf: Fix jit to skip speculation barrier opcode
bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp
====================
Link: https://lore.kernel.org/r/20230407224642.30906-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix irq handling in gpio-davinci
- fix Kconfig dependencies for gpio-regmap
* tag 'gpio-fixes-for-v6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: davinci: Add irq chip flag to skip set wake
gpio: davinci: Do not clear the bank intr enable bit in save_context
gpio: GPIO_REGMAP: select REGMAP instead of depending on it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Fix the ACPI backlight override mechanism for the cases when
acpi_backlight=video is set through the kernel command line or a DMI
quirk and add backlight quirks for Apple iMac14,1 and iMac14,2 and
Lenovo ThinkPad W530 (Hans de Goede)"
* tag 'acpi-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530
ACPI: video: Add acpi_backlight=video quirk for Apple iMac14,1 and iMac14,2
ACPI: video: Make acpi_backlight=video work independent from GPU driver
ACPI: video: Add auto_detect arg to __acpi_video_get_backlight_type()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix uninitialised variable warning (from smatch) in the arm64 compat
alignment fixup code"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: compat: Work around uninitialized variable warning
|
|
Pull ksmbd server fixes from Steve French:
"Four fixes, three for stable:
- slab out of bounds fix
- lock cancellation fix
- minor cleanup to address clang warning
- fix for xfstest 551 (wrong parms passed to kvmalloc)"
* tag '6.3-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr
ksmbd: delete asynchronous work from list
ksmbd: remove unused is_char_allowed function
ksmbd: do not call kvmalloc() with __GFP_NORETRY | __GFP_NO_WARN
|
|
There are some interop issues seen across a few DP monitors with
HBR3 and herobrine boards where the DP display stays blank with hbr3.
This is still under investigation but in preparation for supporting
higher resolutions, its better to disable HBR3 till the issues are
root-caused as there is really no guarantee which monitors will show
the issue and which would not.
This can be enabled back after successful validation across more DP
sinks.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230329233416.27152-1-quic_abhinavk@quicinc.com
|
|
The VLAN filters info is currently being held in a list and 2 bitmaps
(active_cvlans and active_svlans). We are experiencing some racing where
data is not in sync in the list and bitmaps. For example, the VLAN is
initially added to the list but only when the PF replies, it is added to
the bitmap. If a user adds many V2 VLANS before the PF responds:
while [ $((i++)) ]
ip l add l eth0 name eth0.$i type vlan id $i
we might end up with more VLAN list entries than the designated limit.
Also, The "ip link show" will show more links added than the PF limit.
On the other and, the bitmaps are only used to check the number of VLAN
filters and to re-enable the filters when the interface goes from DOWN to
UP.
This patch gets rid of the bitmaps and uses the list only. To do that,
the states of the VLAN filter are modified:
1 - IAVF_VLAN_REMOVE: the entry needs to be totally removed after informing
the PF. This is the "ip link del eth0.$i" path.
2 - IAVF_VLAN_DISABLE: (new) the netdev went down. The filter needs to be
removed from the PF and then marked INACTIVE.
3 - IAVF_VLAN_INACTIVE: (new) no PF filter exists, but the user did not
delete the VLAN.
Fixes: 48ccc43ecf10 ("iavf: Add support VIRTCHNL_VF_OFFLOAD_VLAN_V2 during netdev config")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The VLAN filter states are currently being saved as individual bits.
This is error prone as multiple bits might be mistakenly set.
Fix by replacing the bits with a single state enum. Also, add an
"ACTIVE" state for filters that are accepted by the PF.
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Hangbin Liu says:
====================
bonding: fix ns validation on backup slaves
The first patch fixed a ns validation issue on backup slaves. The second
patch re-format the bond option test and add a test lib file. The third
patch add the arp validate regression test for the kernel patch.
Here is the new bonding option test without the kernel fix:
]# ./bond_options.sh
TEST: prio (active-backup miimon primary_reselect 0) [ OK ]
TEST: prio (active-backup miimon primary_reselect 1) [ OK ]
TEST: prio (active-backup miimon primary_reselect 2) [ OK ]
TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ]
TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ]
TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ]
TEST: prio (active-backup ns_ip6_target primary_reselect 0) [ OK ]
TEST: prio (active-backup ns_ip6_target primary_reselect 1) [ OK ]
TEST: prio (active-backup ns_ip6_target primary_reselect 2) [ OK ]
TEST: prio (balance-tlb miimon primary_reselect 0) [ OK ]
TEST: prio (balance-tlb miimon primary_reselect 1) [ OK ]
TEST: prio (balance-tlb miimon primary_reselect 2) [ OK ]
TEST: prio (balance-tlb arp_ip_target primary_reselect 0) [ OK ]
TEST: prio (balance-tlb arp_ip_target primary_reselect 1) [ OK ]
TEST: prio (balance-tlb arp_ip_target primary_reselect 2) [ OK ]
TEST: prio (balance-tlb ns_ip6_target primary_reselect 0) [ OK ]
TEST: prio (balance-tlb ns_ip6_target primary_reselect 1) [ OK ]
TEST: prio (balance-tlb ns_ip6_target primary_reselect 2) [ OK ]
TEST: prio (balance-alb miimon primary_reselect 0) [ OK ]
TEST: prio (balance-alb miimon primary_reselect 1) [ OK ]
TEST: prio (balance-alb miimon primary_reselect 2) [ OK ]
TEST: prio (balance-alb arp_ip_target primary_reselect 0) [ OK ]
TEST: prio (balance-alb arp_ip_target primary_reselect 1) [ OK ]
TEST: prio (balance-alb arp_ip_target primary_reselect 2) [ OK ]
TEST: prio (balance-alb ns_ip6_target primary_reselect 0) [ OK ]
TEST: prio (balance-alb ns_ip6_target primary_reselect 1) [ OK ]
TEST: prio (balance-alb ns_ip6_target primary_reselect 2) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 0) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 1) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 2) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 3) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 4) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 5) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 6) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ]
TEST: arp_validate (interface eth1 mii_status DOWN) [FAIL]
TEST: arp_validate (interface eth2 mii_status DOWN) [FAIL]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [FAIL]
TEST: arp_validate (interface eth1 mii_status DOWN) [FAIL]
TEST: arp_validate (interface eth2 mii_status DOWN) [FAIL]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [FAIL]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ]
TEST: arp_validate (interface eth1 mii_status DOWN) [FAIL]
TEST: arp_validate (interface eth2 mii_status DOWN) [FAIL]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [FAIL]
Here is the test result after the kernel fix:
TEST: arp_validate (active-backup arp_ip_target arp_validate 0) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 1) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 2) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 3) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 4) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 5) [ OK ]
TEST: arp_validate (active-backup arp_ip_target arp_validate 6) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [ OK ]
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch add bonding arp validate tests with mode active backup,
monitor arp_ip_target and ns_ip6_target. It also checks mii_status
to make sure all slaves are UP.
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To improve the testing process for bond options, A new bond topology lib
is added to our testing setup. The current option_prio.sh file will be
renamed to bond_options.sh so that all bonding options can be tested here.
Specifically, for priority testing, we will run all tests using modes
1, 5, and 6. These changes will help us streamline the testing process
and ensure that our bond options are rigorously evaluated.
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When arp_validate is set to 2, 3, or 6, validation is performed for
backup slaves as well. As stated in the bond documentation, validation
involves checking the broadcast ARP request sent out via the active
slave. This helps determine which slaves are more likely to function in
the event of an active slave failure.
However, when the target is an IPv6 address, the NS message sent from
the active interface is not checked on backup slaves. Additionally,
based on the bond_arp_rcv() rule b, we must reverse the saddr and daddr
when checking the NS message.
Note that when checking the NS message, the destination address is a
multicast address. Therefore, we must convert the target address to
solicited multicast in the bond_get_targets_ip6() function.
Prior to the fix, the backup slaves had a mii status of "down", but
after the fix, all of the slaves' mii status was updated to "UP".
Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
UBSAN: shift-out-of-bounds in net/ipv4/tcp_input.c:555:23
shift exponent 255 is too large for 32-bit type 'int'
CPU: 1 PID: 7907 Comm: ssh Not tainted 6.3.0-rc4-00161-g62bad54b26db-dirty #206
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x136/0x150
__ubsan_handle_shift_out_of_bounds+0x21f/0x5a0
tcp_init_transfer.cold+0x3a/0xb9
tcp_finish_connect+0x1d0/0x620
tcp_rcv_state_process+0xd78/0x4d60
tcp_v4_do_rcv+0x33d/0x9d0
__release_sock+0x133/0x3b0
release_sock+0x58/0x1b0
'maxwin' is int, shifting int for 32 or more bits is undefined behaviour.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Smatch reports: drivers/net/ethernet/sun/niu.c:4525
niu_alloc_channels() warn: missing unwind goto?
If niu_rbr_fill() fails, then we are directly returning 'err' without
freeing the channels.
Fix this by changing direct return to a goto 'out_err'.
Fixes: a3138df9f20e ("[NIU]: Add Sun Neptune ethernet driver.")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This lock was supposed to be an unlock.
Fixes: 6cc041e90c17 ("cifs: avoid races in parallel reconnects in smb1")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still
set, and partition scan will be proceed again when blkdev_get_by_dev()
is called. However, this will cause a problem that re-assemble partitioned
raid device will creat partition for underlying disk.
Test procedure:
mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0
sgdisk -n 0:0:+100MiB /dev/md0
blockdev --rereadpt /dev/sda
blockdev --rereadpt /dev/sdb
mdadm -S /dev/md0
mdadm -A /dev/md0 /dev/sda /dev/sdb
Test result: underlying disk partition and raid partition can be
observed at the same time
Note that this can still happen in come corner cases that
GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid
device.
Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again")
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit c14f7ccc9f5d ("PCI: Assign PCI domain IDs by ida_alloc()")
introduced a use-after-free bug in the bus removal cleanup. The issue was
found with kfence:
[ 19.293351] BUG: KFENCE: use-after-free read in pci_bus_release_domain_nr+0x10/0x70
[ 19.302817] Use-after-free read at 0x000000007f3b80eb (in kfence-#115):
[ 19.309677] pci_bus_release_domain_nr+0x10/0x70
[ 19.309691] dw_pcie_host_deinit+0x28/0x78
[ 19.309702] tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194]
[ 19.309734] tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194]
[ 19.309752] platform_probe+0x90/0xd8
...
[ 19.311457] kfence-#115: 0x00000000063a155a-0x00000000ba698da8, size=1072, cache=kmalloc-2k
[ 19.311469] allocated by task 96 on cpu 10 at 19.279323s:
[ 19.311562] __kmem_cache_alloc_node+0x260/0x278
[ 19.311571] kmalloc_trace+0x24/0x30
[ 19.311580] pci_alloc_bus+0x24/0xa0
[ 19.311590] pci_register_host_bridge+0x48/0x4b8
[ 19.311601] pci_scan_root_bus_bridge+0xc0/0xe8
[ 19.311613] pci_host_probe+0x18/0xc0
[ 19.311623] dw_pcie_host_init+0x2c0/0x568
[ 19.311630] tegra_pcie_dw_probe+0x610/0xb28 [pcie_tegra194]
[ 19.311647] platform_probe+0x90/0xd8
...
[ 19.311782] freed by task 96 on cpu 10 at 19.285833s:
[ 19.311799] release_pcibus_dev+0x30/0x40
[ 19.311808] device_release+0x30/0x90
[ 19.311814] kobject_put+0xa8/0x120
[ 19.311832] device_unregister+0x20/0x30
[ 19.311839] pci_remove_bus+0x78/0x88
[ 19.311850] pci_remove_root_bus+0x5c/0x98
[ 19.311860] dw_pcie_host_deinit+0x28/0x78
[ 19.311866] tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194]
[ 19.311883] tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194]
[ 19.311900] platform_probe+0x90/0xd8
...
[ 19.313579] CPU: 10 PID: 96 Comm: kworker/u24:2 Not tainted 6.2.0 #4
[ 19.320171] Hardware name: /, BIOS 1.0-d7fb19b 08/10/2022
[ 19.325852] Workqueue: events_unbound deferred_probe_work_func
The stack trace is a bit misleading as dw_pcie_host_deinit() doesn't
directly call pci_bus_release_domain_nr(). The issue turns out to be in
pci_remove_root_bus() which first calls pci_remove_bus() which frees the
struct pci_bus when its struct device is released. Then
pci_bus_release_domain_nr() is called and accesses the freed struct
pci_bus. Reordering these fixes the issue.
Fixes: c14f7ccc9f5d ("PCI: Assign PCI domain IDs by ida_alloc()")
Link: https://lore.kernel.org/r/20230329123835.2724518-1-robh@kernel.org
Link: https://lore.kernel.org/r/b529cb69-0602-9eed-fc02-2f068707a006@nvidia.com
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v6.2+
Cc: Pali Rohár <pali@kernel.org>
|
|
Fix grep warning during the build, with GNU grep 3.8
with the following command
`grep -v '^\#\|^$$' rust/bindgen_parameters`
I see the following warning
```
grep: warning: stray \ before #
--opaque-type xregs_state
--opaque-type desc_struct
--opaque-type arch_lbr_state
--opaque-type local_apic
--opaque-type x86_msi_data
--opaque-type x86_msi_addr_lo
--opaque-type kunit_try_catch
--opaque-type spinlock
--no-doc-comments
```
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
More complex drivers might want to use modules to organize their Rust
code, but those module folders do not need a Makefile.
generate_rust_analyzer.py currently crashes on those. Fix it so that a
missing Makefile is silently ignored.
Link: https://github.com/Rust-for-Linux/linux/pull/883
Signed-off-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
After a job is pushed into the queue, it is owned by the scheduler core
and may be freed at any time, so we can't write nor read the submit
timestamp after that point.
Fixes oopses observed with the drm/asahi driver, found with kASAN.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://lore.kernel.org/r/20230406-scheduler-uaf-2-v1-1-972531cf0a81@asahilina.net
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
|
|
The AMD [1022:15b8] USB controller loses some internal functional MSI-X
context when transitioning from D0 to D3hot. BIOS normally traps D0->D3hot
and D3hot->D0 transitions so it can save and restore that internal context,
but some firmware in the field can't do this because it fails to clear the
AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit.
Clear AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit before USB controller
initialization during boot.
Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u
Link: https://lore.kernel.org/r/20230329172859.699743-1-Basavaraj.Natikar@amd.com
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Tested-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
|
|
pci_msix_can_alloc_dyn() is not declared when CONFIG_PCI_MSI is disabled.
There is no existing user of pci_msix_can_alloc_dyn() but work is in
progress to change this. This work encounters the following error when
CONFIG_PCI_MSI is disabled:
drivers/vfio/pci/vfio_pci_intrs.c:427:21: error: implicit declaration of function 'pci_msix_can_alloc_dyn' [-Werror=implicit-function-declaration]
Provide definition for pci_msix_can_alloc_dyn() in preparation for users
that need to compile when CONFIG_PCI_MSI is disabled.
[bhelgaas: Also reported by Arnd Bergmann <arnd@kernel.org> in
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c; added his Fixes: line]
Fixes: fb0a6a268dcd ("net/mlx5: Provide external API for allocating vectors")
Fixes: 34026364df8e ("PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X")
Link: https://lore.kernel.org/oe-kbuild-all/202303291000.PWFqGCxH-lkp@intel.com/
Link: https://lore.kernel.org/r/310ecc4815dae4174031062f525245f0755c70e2.1680119924.git.reinette.chatre@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v6.2+
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fixes for v6.3-final
A solitary fix here from Krzysztof for an invalid property that
should've probably been removed months ago, but was missed due to it
being in a dtb that doesn't build w/ defconfig.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.3-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: canaan: drop invalid spi-max-frequency
Link: https://lore.kernel.org/r/20230406-negate-octagon-0fc2e47dbde5@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The rust_fmt_argument function is called from printk() to handle the %pA
format specifier.
Since it's called from C, we should mark it extern "C" to make sure it's
ABI compatible.
Cc: stable@vger.kernel.org
Fixes: 247b365dc8dc ("rust: add `kernel` crate")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
[Applied `rustfmt`]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The arch_support table was not sorted alphabetically.
Sorts the table properly.
Fixes: 0438aadfa69a ("rust: arch/um: Add support for CONFIG_RUST under x86_64 UML")
Link: https://lore.kernel.org/rust-for-linux/CANiq72nXMsnUsJNZOG-QZiCVOqa9dRUSMc4RAS3ExLZNJ7VhHg@mail.gmail.com
Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Thomas Bamelis <thomas@bamelis.dev>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The support for TCS4525 regulator has been introduced with a wrong
ramp-rate mask, which has been defined as a logical expression instead
of a bit shift operation.
For clarity, fix it using GENMASK() macro.
Fixes: 914df8faa7d6 ("regulator: fan53555: Add TCS4525 DCDC support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406171806.948290-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since commit f2a9eb975ab2 ("regulator: fan53555: Add support for
FAN53526") the driver makes use of the BIT() macro, but relies on the
bits header being implicitly included.
Explicitly pull the header in to avoid potential build failures in some
configurations.
While here, reorder include directives alphabetically.
Fixes: f2a9eb975ab2 ("regulator: fan53555: Add support for FAN53526")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406171806.948290-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix a trivial spelling error in the `rust/kernel/str.rs` file.
Fixes: 247b365dc8dc ("rust: add `kernel` crate")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/978
Signed-off-by: Patrick Blass <patrickblass@mailbox.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
[Reworded slightly]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The lastcmd_mutex is only used in trace_events_synth.c and should be
static.
Link: https://lore.kernel.org/linux-trace-kernel/202304062033.cRStgOuP-lkp@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230406111033.6e26de93@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Fixes: 4ccf11c4e8a8e ("tracing/synthetic: Fix races on freeing last_cmd")
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Picasso was the first APU that introduced s2idle support from AMD,
and it was predating before vendors started to use `StorageD3Enable`
in their firmware.
Windows doesn't have problems with this hardware and NVME so it was
likely on the list of hardcoded CPUs to use this behavior in Windows.
Add it to the list for Linux to avoid NVME resume issues.
Reported-by: Stuart Axon <stuaxo2@yahoo.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2449
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and can.
Current release - regressions:
- wifi: mac80211:
- fix potential null pointer dereference
- fix receiving mesh packets in forwarding=0 networks
- fix mesh forwarding
Current release - new code bugs:
- virtio/vsock: fix leaks due to missing skb owner
Previous releases - regressions:
- raw: fix NULL deref in raw_get_next().
- sctp: check send stream number after wait_for_sndbuf
- qrtr:
- fix a refcount bug in qrtr_recvmsg()
- do not do DEL_SERVER broadcast after DEL_CLIENT
- wifi: brcmfmac: fix SDIO suspend/resume regression
- wifi: mt76: fix use-after-free in fw features query.
- can: fix race between isotp_sendsmg() and isotp_release()
- eth: mtk_eth_soc: fix remaining throughput regression
- eth: ice: reset FDIR counter in FDIR init stage
Previous releases - always broken:
- core: don't let netpoll invoke NAPI if in xmit context
- icmp: guard against too small mtu
- ipv6: fix an uninit variable access bug in __ip6_make_skb()
- wifi: mac80211: fix the size calculation of
ieee80211_ie_len_eht_cap()
- can: fix poll() to not report false EPOLLOUT events
- eth: gve: secure enough bytes in the first TX desc for all TCP
pkts"
* tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: stmmac: check fwnode for phy device before scanning for phy
net: stmmac: Add queue reset into stmmac_xdp_open() function
selftests: net: rps_default_mask.sh: delete veth link specifically
net: fec: make use of MDIO C45 quirk
can: isotp: fix race between isotp_sendsmg() and isotp_release()
can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
gve: Secure enough bytes in the first TX desc for all TCP pkts
netlink: annotate lockless accesses to nlk->max_recvmsg_len
ethtool: reset #lanes when lanes is omitted
ping: Fix potentail NULL deref for /proc/net/icmp.
raw: Fix NULL deref in raw_get_next().
ice: Reset FDIR counter in FDIR init stage
ice: fix wrong fallback logic for FDIR
net: stmmac: fix up RX flow hash indirection table when setting channels
net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe
wifi: mt76: ignore key disable commands
wifi: ath11k: reduce the MHI timeout to 20s
ipv6: Fix an uninit variable access bug in __ip6_make_skb()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"One single fix to mount_setattr_test build failure"
* tag 'linux-kselftest-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests mount: Fix mount_setattr_test builds failed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- An invalid VA range can be be put in a pages and eventually trigger
WARN_ON, reject it early
- Use of the wrong start index value when doing the complex batch carry
scheme
- Wrong store ordering resulting in corrupting data used in a later
calculation that corrupted the batch structure during carry
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not corrupt the pfn list when doing batch carry
iommufd: Fix unpinning of pages when an access is present
iommufd: Check for uptr overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"These are some fixes to make sure the PWM state structure is always
initialized to a known state.
Prior to this it could happen in some situations that random data from
the stack would leak into the data structure and cause subtle bugs"
* tag 'pwm/for-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Zero-initialize the pwm_state passed to driver's .get_state()
pwm: meson: Explicitly set .polarity in .get_state()
pwm: sprd: Explicitly set .polarity in .get_state()
pwm: iqs620a: Explicitly set .polarity in .get_state()
pwm: cros-ec: Explicitly set .polarity in .get_state()
pwm: hibvt: Explicitly set .polarity in .get_state()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #3
- Ensure the guest PMU context is restored before the first KVM_RUN,
fixing an issue where EL0 event counting is broken after vCPU
save/restore
- Actually initialize ID_AA64PFR0_EL1.{CSV2,CSV3} based on the
sanitized, system-wide values for protected VMs
|
|
Pull drm fixes from Daniel Vetter:
"Mostly i915 fixes: dp mst for compression/dsc, perf ioctl uaf, ctx rpm
accounting, gt reset vs huc loading.
And a few individual driver fixes: ivpu dma fence&suspend, panfrost
mmap, nouveau color depth"
* tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm:
accel/ivpu: Fix S3 system suspend when not idle
accel/ivpu: Add dma fence to command buffers only
drm/i915: Fix context runtime accounting
drm/i915: fix race condition UAF in i915_perf_add_config_ioctl
drm/i915: Use compressed bpp when calculating m/n value for DP MST DSC
drm/i915/huc: Cancel HuC delayed load timer on reset.
drm/i915/ttm: fix sparse warning
drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error path
drm/nouveau/disp: Support more modes by checking with lower bpc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are various fixes for Intel drivers,
and there is a change in ASoC PCM core for the format constraints.
In addition, a workaround for HD-audio HDMI regressions and usual
HD-audio quirks are found"
* tag 'sound-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Preserve the previous PCM device upon re-enablement
ALSA: hda/realtek: Add quirk for Clevo X370SNW
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
ASoC: SOF: avoid a NULL dereference with unsupported widgets
ASoC: da7213.c: add missing pm_runtime_disable()
ASoC: hdac_hdmi: use set_stream() instead of set_tdm_slots()
ASoC: codecs: lpass: fix the order or clks turn off during suspend
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750
ASoC: SOF: ipc4: Ensure DSP is in D0I0 during sof_ipc4_set_get_data()
ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)
ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm
ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15
ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- more think-lmi fixes
- one DMI quirk addition
* tag 'platform-drivers-x86-v6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Add missing T14s Gen1 type to s2idle quirk list
platform/x86: think-lmi: Clean up display of current_value on Thinkstation
platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI strings
platform/x86: think-lmi: Fix memory leak when showing current settings
|
|
Memory passed to kvfree_rcu() that is to be freed is tracked by a
per-CPU kfree_rcu_cpu structure, which in turn contains pointers
to kvfree_rcu_bulk_data structures that contain pointers to memory
that has not yet been handed to RCU, along with an kfree_rcu_cpu_work
structure that tracks the memory that has already been handed to RCU.
These structures track three categories of memory: (1) Memory for
kfree(), (2) Memory for kvfree(), and (3) Memory for both that arrived
during an OOM episode. The first two categories are tracked in a
cache-friendly manner involving a dynamically allocated page of pointers
(the aforementioned kvfree_rcu_bulk_data structures), while the third
uses a simple (but decidedly cache-unfriendly) linked list through the
rcu_head structures in each block of memory.
On a given CPU, these three categories are handled as a unit, with that
CPU's kfree_rcu_cpu_work structure having one pointer for each of the
three categories. Clearly, new memory for a given category cannot be
placed in the corresponding kfree_rcu_cpu_work structure until any old
memory has had its grace period elapse and thus has been removed. And
the kfree_rcu_monitor() function does in fact check for this.
Except that the kfree_rcu_monitor() function checks these pointers one
at a time. This means that if the previous kfree_rcu() memory passed
to RCU had only category 1 and the current one has only category 2, the
kfree_rcu_monitor() function will send that current category-2 memory
along immediately. This can result in memory being freed too soon,
that is, out from under unsuspecting RCU readers.
To see this, consider the following sequence of events, in which:
o Task A on CPU 0 calls rcu_read_lock(), then uses "from_cset",
then is preempted.
o CPU 1 calls kfree_rcu(cset, rcu_head) in order to free "from_cset"
after a later grace period. Except that "from_cset" is freed
right after the previous grace period ended, so that "from_cset"
is immediately freed. Task A resumes and references "from_cset"'s
member, after which nothing good happens.
In full detail:
CPU 0 CPU 1
---------------------- ----------------------
count_memcg_event_mm()
|rcu_read_lock() <---
|mem_cgroup_from_task()
|// css_set_ptr is the "from_cset" mentioned on CPU 1
|css_set_ptr = rcu_dereference((task)->cgroups)
|// Hard irq comes, current task is scheduled out.
cgroup_attach_task()
|cgroup_migrate()
|cgroup_migrate_execute()
|css_set_move_task(task, from_cset, to_cset, true)
|cgroup_move_task(task, to_cset)
|rcu_assign_pointer(.., to_cset)
|...
|cgroup_migrate_finish()
|put_css_set_locked(from_cset)
|from_cset->refcount return 0
|kfree_rcu(cset, rcu_head) // free from_cset after new gp
|add_ptr_to_bulk_krc_lock()
|schedule_delayed_work(&krcp->monitor_work, ..)
kfree_rcu_monitor()
|krcp->bulk_head[0]'s work attached to krwp->bulk_head_free[]
|queue_rcu_work(system_wq, &krwp->rcu_work)
|if rwork->rcu.work is not in WORK_STRUCT_PENDING_BIT state,
|call_rcu(&rwork->rcu, rcu_work_rcufn) <--- request new gp
// There is a perious call_rcu(.., rcu_work_rcufn)
// gp end, rcu_work_rcufn() is called.
rcu_work_rcufn()
|__queue_work(.., rwork->wq, &rwork->work);
|kfree_rcu_work()
|krwp->bulk_head_free[0] bulk is freed before new gp end!!!
|The "from_cset" is freed before new gp end.
// the task resumes some time later.
|css_set_ptr->subsys[(subsys_id) <--- Caused kernel crash, because css_set_ptr is freed.
This commit therefore causes kfree_rcu_monitor() to refrain from moving
kfree_rcu() memory to the kfree_rcu_cpu_work structure until the RCU
grace period has completed for all three categories.
v2: Use helper function instead of inserted code block at kfree_rcu_monitor().
Fixes: 34c881745549 ("rcu: Support kfree_bulk() interface in kfree_rcu()")
Fixes: 5f3c8d620447 ("rcu/tree: Maintain separate array for vmalloc ptrs")
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Ziwei Dai <ziwei.dai@unisoc.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are minor fixes to address false-positive build warnings:
Some of the less common I/O accessors are missing __force casts and
cause sparse warnings for their implied byteswap, and a recent change
to __generic_cmpxchg_local() causes a warning about constant integer
truncation"
* tag 'asm-generic-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: avoid __generic_cmpxchg_local warnings
asm-generic/io.h: suppress endianness warnings for relaxed accessors
asm-generic/io.h: suppress endianness warnings for readq() and writeq()
|
|
xdp-features supported by veth driver are no more static, but they
depends on veth configuration (e.g. if GRO is enabled/disabled or
TX/RX queue configuration). Take it into account in xdp_redirect
xdp-features selftest for veth driver.
Fixes: fccca038f300 ("veth: take into account device reconfiguration for xdp_features flag")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/bc35455cfbb1d4f7f52536955ded81ad47d8dc54.1680777371.git.lorenzo@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The current code path can lead to warnings because of uninitialized device,
which contains, as a consequence, uninitialized kobject. The uninitialized
device is passed to of_platform_populate, which will at some point, while
creating child device, try to get a reference on uninitialized parent,
resulting in the following warning:
kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is
being called.
The warning is observed after migrating a kernel 5.10.x to 6.1.x.
Reverting commit 0d70af3c2530 ("fpga: bridge: Use standard dev_release for
class driver") seems to remove the warning.
This commit aggregates device_initialize() and device_add() into
device_register() but this new call is done AFTER of_platform_populate
Fixes: 0d70af3c2530 ("fpga: bridge: Use standard dev_release for class driver")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230404133102.2837535-2-alexis.lothore@bootlin.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
|
|
In order to avoid pop noise which occurs when switching
device from speaker to headphone, the amplifier should
power down first when stopping playback.
Signed-off-by: Long Wang <long.wang@analog.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230406154535.18205-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add pins and verbs needed to enable speakers and jack.
The pins and verbs configurations were identified by snooping the
Windows driver commands, with a nice write-up here:
https://brakkee.org/site/2023/02/07/fixing-sound-on-the-asus-n7601zm/
Reported-by: Erik Brakkee <erik@brakkee.org>
Link: https://github.com/thesofproject/linux/issues/4176
Tested-by: Erik Brakkee <erik@brakkee.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230406152725.15191-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some DT devices already have phy device configured in the DT/ACPI.
Current implementation scans for a phy unconditionally even though
there is a phy listed in the DT/ACPI and already attached.
We should check the fwnode if there is any phy device listed in
fwnode and decide whether to scan for a phy to attach to.
Fixes: fe2cfbc96803 ("net: stmmac: check if MAC needs to attach to a PHY")
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/lkml/20230403212434.296975-1-martin.blumenstingl@googlemail.com/
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shahab Vahedi <shahab@synopsys.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Link: https://lore.kernel.org/r/20230406024541.3556305-1-michael.wei.hong.sit@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller report a WARNING: "WARN_ON(!direct)" in modify_ftrace_direct().
Root cause is 'direct->addr' was changed from 'old_addr' to 'new_addr' but
not restored if error happened on calling ftrace_modify_direct_caller().
Then it can no longer find 'direct' by that 'old_addr'.
To fix it, restore 'direct->addr' to 'old_addr' explicitly in error path.
Link: https://lore.kernel.org/linux-trace-kernel/20230330025223.1046087-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: <ast@kernel.org>
Cc: <daniel@iogearbox.net>
Fixes: 8a141dd7f706 ("ftrace: Fix modify_ftrace_direct.")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The alignment mask in swiotlb_do_find_slots() masks off the high
bits which are not relevant for the alignment, so multiple
requirements are combined with a bitwise OR rather than AND.
In plain English, the stricter the alignment, the more bits must
be set in iotlb_align_mask.
Confusion may arise from the fact that the same variable is also
used to mask off the offset within a swiotlb slot, which is
achieved with a bitwise AND.
Fixes: 0eee5ae10256 ("swiotlb: fix slot alignment checks")
Reported-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/all/CAA42JLa1y9jJ7BgQvXeUYQh-K2mDNHd2BYZ4iZUz33r5zY7oAQ@mail.gmail.com/
Reported-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Link: https://lore.kernel.org/all/20230405003549.GA21326@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net/
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
