summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-09Merge tag 'drm-fixes-2020-07-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "I've been off most of the week, but some fixes have piled up. Seems a bit busier than last week, but they are pretty spread out across a bunch of drivers, none of them seem that big or worried me too much. amdgpu: - Fix a suspend/resume issue with PSP - Backlight fix for Renoir - Fix for gpu recovery debugging radeon: - Fix a double free in error path i915: - fbc fencing fix - debugfs panic fix - gem vma constuction fix - gem pin under vm->nutex fix nouveau: - SVM fixes - display fixes meson: - OSD burst length fixes hibmc: - runtime warning fix mediatek: - cmdq, mmsys fixes - visibility check fixes" * tag 'drm-fixes-2020-07-10' of git://anongit.freedesktop.org/drm/drm: (24 commits) drm/amdgpu: don't do soft recovery if gpu_recovery=0 drm/radeon: fix double free drm/amd/display: add dmcub check on RENOIR drm/amdgpu: add TMR destory function for psp drm/amdgpu: asd function needs to be unloaded in suspend phase drm/hisilicon/hibmc: Move drm_fbdev_generic_setup() down to avoid the splat drm/nouveau/nouveau: fix page fault on device private memory drm/nouveau/svm: fix migrate page regression drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout drm/nouveau/kms/nv50-: bail from nv50_audio_disable() early if audio not enabled drm/i915/gt: Pin the rings before marking active drm/i915: Also drop vm.ref along error paths for vma construction drm/i915: Drop vm.ref for duplicate vma on construction drm/i915/fbc: Fix fence_y_offset handling drm/i915: Skip stale object handle for debugfs per-file-stats drm/mediatek: mtk_hdmi: Remove debug messages for function calls drm/mediatek: mtk_mt8173_hdmi_phy: Remove unnused const variables drm/mediatek: Delete not used of_device_get_match_data drm/mediatek: Remove unnecessary conversion to bool drm/meson: viu: fix setting the OSD burst length in VIU_OSD1_FIFO_CTRL_STAT ...
2020-07-09Restore gcc check in mips asm/unroll.hCesar Eduardo Barros
While raising the gcc version requirement to 4.9, the compile-time check in the unroll macro was accidentally changed from being used on gcc and clang to being used on clang only. Restore the gcc check, changing it from "gcc >= 4.7" to "all gcc". [ We should probably remove this all entirely: if we remove the check for CLANG, then the check for GCC can go away. Older versions of clang are not really appropriate or supported for kernel builds - Linus ] Fixes: 6ec4476ac825 ("Raise gcc version requirement to 4.9") Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.eti.br> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-09kbuild: Move -Wtype-limits to W=2Rikard Falkeborn
-Wtype-limits is included in -Wextra which is added at W=1. It warns (among other things) that 'comparison of an unsigned variable `< 0` is always false. This causes noisy warnings, especially when used in macros, hence it is more suitable for W=2. Link: https://lore.kernel.org/lkml/CAHk-=wiKCXEWKJ9dWUimGbrVRo_N2RosESUw8E7m9AEtyZcu=w@mail.gmail.com/ Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-09cgroup: Fix sock_cgroup_data on big-endian.Cong Wang
In order for no_refcnt and is_data to be the lowest order two bits in the 'val' we have to pad out the bitfield of the u8. Fixes: ad0f75e5f57c ("cgroup: fix cgroup_sk_alloc() for sk_clone_lock()") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09selftests: bpf: Fix detach from sockmap testsLorenz Bauer
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour. In the first case, the tests check that detaching without giving a program succeeds. Since these are not the desired semantics, invert the condition. In the second case, the clean up code doesn't supply the necessary program fds. Fixes: bb0de3131f4c ("bpf: sockmap: Require attach_bpf_fd when detaching a program") Reported-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
2020-07-10Merge tag 'amd-drm-fixes-5.8-2020-07-09' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.8-2020-07-09: amdgpu: - Fix a suspend/resume issue with PSP - Backlight fix for Renoir - Fix for gpu recovery debugging radeon: - Fix a double free in error path Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200709185221.44895-1-alexander.deucher@amd.com
2020-07-10Merge tag 'drm-intel-fixes-2020-07-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes One display's fbc patch fixing fence_y_offset calculation from Ville and 4 patches from Chris on GEM: 1 fixing a debugfs panic and others fixing vma construction and pin under vm->mutex. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200708190654.GA3924867@intel.com
2020-07-10Merge branch 'linux-5.8' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
- SVM fixes - display fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5i-dc0Onbk8FWzd-PTgXHHWi6jcE3O0hVx8+V5qEOeqg@mail.gmail.com
2020-07-10Merge tag 'drm-misc-fixes-2020-07-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * meson: OSD burst-length fixes * hibmc: fix runtime warning by setting up generic fbdev after registering device Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200708121050.GA29420@linux-uq9g
2020-07-10Merge tag 'mediatek-drm-fixes-5.8' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.8 This include fixup for cmdq, mmsys, visibility checking and some refinement. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200707153944.604-1-chunkuang.hu@kernel.org
2020-07-09Merge branch 'Expose-port-split-attributes'David S. Miller
Ido Schimmel says: ==================== Expose port split attributes Danielle says: Currently, user space has no way of knowing if a port can be split and into how many ports. Among other things, this makes it impossible to write generic tests for port split functionality. Therefore, this set exposes two new devlink port attributes to user space: Number of lanes and whether the port can be split or not. Patch set overview: Patches #1-#4 cleanup 'struct devlink_port_attrs' and reduce the number of parameters passed between drivers and devlink via devlink_port_attrs_set() Patch #5 adds devlink port lanes attributes Patches #6-#7 add devlink port splittable attribute Patch #8 exploits the fact that devlink is now aware of port's number of lanes and whether the port can be split or not and moves some checks from drivers to devlink Patch #9 adds a port split test Changes since v2: * Remove some local variables from patch #3 * Reword function description in patch #5 * Fix a bug in patch #8 * Add a test for the splittable attribute in patch #9 Changes since v1: * Rename 'width' attribute to 'lanes' * Add 'splittable' attribute * Move checks from drivers to devlink ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09selftests: net: Add port split testDanielle Ratson
Test port split configuration using previously added number of port lanes attribute. Check that all the splittable ports are successfully split to their maximum number of lanes and below, and that those which are not splittable fail to be split. Test output example: TEST: swp4 is unsplittable [ OK ] TEST: split port swp53 into 4 [ OK ] TEST: Unsplit port pci/0000:03:00.0/25 [ OK ] TEST: split port swp53 into 2 [ OK ] TEST: Unsplit port pci/0000:03:00.0/25 [ OK ] Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09devlink: Move input checks from driver to devlinkDanielle Ratson
Currently, all the input checks are done in driver. After adding the split capability to devlink port, move the checks to devlink. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09devlink: Add a new devlink port split ability attribute and pass to netlinkDanielle Ratson
Add a new attribute that indicates the split ability of devlink port. Drivers are expected to set it via devlink_port_attrs_set(), before registering the port. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09mlxsw: Set port split ability attribute in driverDanielle Ratson
Currently, port attributes like flavour, port number and whether the port was split are set when initializing a port. Set the split ability of the port as well, based on port_mapping->width field and split attribute of devlink port in spectrum, so that it could be easily passed to devlink in the next patch. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09devlink: Add a new devlink port lanes attribute and pass to netlinkDanielle Ratson
Add a new devlink port attribute that indicates the port's number of lanes. Drivers are expected to set it via devlink_port_attrs_set(), before registering the port. The attribute is not passed to user space in case the number of lanes is invalid (0). Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09mlxsw: Set number of port lanes attribute in driverDanielle Ratson
Currently, port attributes like flavour, port number and whether the port was split are set when initializing a port. Set the number of lanes of the port as well so that it could be easily passed to devlink in the next patch. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09devlink: Replace devlink_port_attrs_set parameters with a structDanielle Ratson
Currently, devlink_port_attrs_set accepts a long list of parameters, that most of them are devlink port's attributes. Use the devlink_port_attrs struct to replace the relevant parameters. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09devlink: Move switch_port attribute of devlink_port_attrs to devlink_portDanielle Ratson
The struct devlink_port_attrs holds the attributes of devlink_port. Similarly to the previous patch, 'switch_port' attribute is another exception. Move 'switch_port' to be devlink_port's field. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09devlink: Move set attribute of devlink_port_attrs to devlink_portDanielle Ratson
The struct devlink_port_attrs holds the attributes of devlink_port. The 'set' field is not devlink_port's attribute as opposed to most of the others. Move 'set' to be devlink_port's field called 'attrs_set'. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09Merge tag 'for-5.8/dm-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - A request-based DM fix to not use a waitqueue to wait for blk-mq IO completion because doing so is racey. - A couple more DM zoned target fixes to address issues introduced during the 5.8 cycle. - A DM core fix to use proper interface to cleanup DM's static flush bio. - A DM core fix to prevent mm recursion during memory allocation needed by dm_kobject_uevent. * tag 'for-5.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: use noio when sending kobject event dm zoned: Fix zone reclaim trigger dm zoned: fix unused but set variable warnings dm writecache: reject asynchronous pmem devices dm: use bio_uninit instead of bio_disassociate_blkg dm: do not use waitqueue for request-based DM
2020-07-09net: phy: mscc: fix ptr_ret.cocci warningskernel test robot
drivers/net/phy/mscc/mscc_ptp.c:1496:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Fixes: 7d272e63e097 ("net: phy: mscc: timestamping and PHC support") CC: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09Merge tag 'kallsyms_show_value-v5.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kallsyms fix from Kees Cook: "Refactor kallsyms_show_value() users for correct cred. I'm not delighted by the timing of getting these changes to you, but it does fix a handful of kernel address exposures, and no one has screamed yet at the patches. Several users of kallsyms_show_value() were performing checks not during "open". Refactor everything needed to gain proper checks against file->f_cred for modules, kprobes, and bpf" * tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests: kmod: Add module address visibility test bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok() kprobes: Do not expose probe addresses to non-CAP_SYSLOG module: Do not expose section addresses to non-CAP_SYSLOG module: Refactor section attr into bin attribute kallsyms: Refactor kallsyms_show_value() to take cred
2020-07-09tcp: make sure listeners don't initialize congestion-control stateChristoph Paasch
syzkaller found its way into setsockopt with TCP_CONGESTION "cdg". tcp_cdg_init() does a kcalloc to store the gradients. As sk_clone_lock just copies all the memory, the allocated pointer will be copied as well, if the app called setsockopt(..., TCP_CONGESTION) on the listener. If now the socket will be destroyed before the congestion-control has properly been initialized (through a call to tcp_init_transfer), we will end up freeing memory that does not belong to that particular socket, opening the door to a double-free: [ 11.413102] ================================================================== [ 11.414181] BUG: KASAN: double-free or invalid-free in tcp_cleanup_congestion_control+0x58/0xd0 [ 11.415329] [ 11.415560] CPU: 3 PID: 4884 Comm: syz-executor.5 Not tainted 5.8.0-rc2 #80 [ 11.416544] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 11.418148] Call Trace: [ 11.418534] <IRQ> [ 11.418834] dump_stack+0x7d/0xb0 [ 11.419297] print_address_description.constprop.0+0x1a/0x210 [ 11.422079] kasan_report_invalid_free+0x51/0x80 [ 11.423433] __kasan_slab_free+0x15e/0x170 [ 11.424761] kfree+0x8c/0x230 [ 11.425157] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.425872] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.426493] inet_csk_destroy_sock+0x153/0x2c0 [ 11.427093] tcp_v4_syn_recv_sock+0xb29/0x1100 [ 11.427731] tcp_get_cookie_sock+0xc3/0x4a0 [ 11.429457] cookie_v4_check+0x13d0/0x2500 [ 11.433189] tcp_v4_do_rcv+0x60e/0x780 [ 11.433727] tcp_v4_rcv+0x2869/0x2e10 [ 11.437143] ip_protocol_deliver_rcu+0x23/0x190 [ 11.437810] ip_local_deliver+0x294/0x350 [ 11.439566] __netif_receive_skb_one_core+0x15d/0x1a0 [ 11.441995] process_backlog+0x1b1/0x6b0 [ 11.443148] net_rx_action+0x37e/0xc40 [ 11.445361] __do_softirq+0x18c/0x61a [ 11.445881] asm_call_on_stack+0x12/0x20 [ 11.446409] </IRQ> [ 11.446716] do_softirq_own_stack+0x34/0x40 [ 11.447259] do_softirq.part.0+0x26/0x30 [ 11.447827] __local_bh_enable_ip+0x46/0x50 [ 11.448406] ip_finish_output2+0x60f/0x1bc0 [ 11.450109] __ip_queue_xmit+0x71c/0x1b60 [ 11.451861] __tcp_transmit_skb+0x1727/0x3bb0 [ 11.453789] tcp_rcv_state_process+0x3070/0x4d3a [ 11.456810] tcp_v4_do_rcv+0x2ad/0x780 [ 11.457995] __release_sock+0x14b/0x2c0 [ 11.458529] release_sock+0x4a/0x170 [ 11.459005] __inet_stream_connect+0x467/0xc80 [ 11.461435] inet_stream_connect+0x4e/0xa0 [ 11.462043] __sys_connect+0x204/0x270 [ 11.465515] __x64_sys_connect+0x6a/0xb0 [ 11.466088] do_syscall_64+0x3e/0x70 [ 11.466617] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.467341] RIP: 0033:0x7f56046dc469 [ 11.467844] Code: Bad RIP value. [ 11.468282] RSP: 002b:00007f5604dccdd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 11.469326] RAX: ffffffffffffffda RBX: 000000000068bf00 RCX: 00007f56046dc469 [ 11.470379] RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000004 [ 11.471311] RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000 [ 11.472286] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 11.473341] R13: 000000000041427c R14: 00007f5604dcd5c0 R15: 0000000000000003 [ 11.474321] [ 11.474527] Allocated by task 4884: [ 11.475031] save_stack+0x1b/0x40 [ 11.475548] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 11.476182] tcp_cdg_init+0xf0/0x150 [ 11.476744] tcp_init_congestion_control+0x9b/0x3a0 [ 11.477435] tcp_set_congestion_control+0x270/0x32f [ 11.478088] do_tcp_setsockopt.isra.0+0x521/0x1a00 [ 11.478744] __sys_setsockopt+0xff/0x1e0 [ 11.479259] __x64_sys_setsockopt+0xb5/0x150 [ 11.479895] do_syscall_64+0x3e/0x70 [ 11.480395] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.481097] [ 11.481321] Freed by task 4872: [ 11.481783] save_stack+0x1b/0x40 [ 11.482230] __kasan_slab_free+0x12c/0x170 [ 11.482839] kfree+0x8c/0x230 [ 11.483240] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.483948] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.484502] inet_csk_destroy_sock+0x153/0x2c0 [ 11.485144] tcp_close+0x932/0xfe0 [ 11.485642] inet_release+0xc1/0x1c0 [ 11.486131] __sock_release+0xc0/0x270 [ 11.486697] sock_close+0xc/0x10 [ 11.487145] __fput+0x277/0x780 [ 11.487632] task_work_run+0xeb/0x180 [ 11.488118] __prepare_exit_to_usermode+0x15a/0x160 [ 11.488834] do_syscall_64+0x4a/0x70 [ 11.489326] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Wei Wang fixed a part of these CDG-malloc issues with commit c12014440750 ("tcp: memset ca_priv data to 0 properly"). This patch here fixes the listener-scenario: We make sure that listeners setting the congestion-control through setsockopt won't initialize it (thus CDG never allocates on listeners). For those who use AF_UNSPEC to reuse a socket, tcp_disconnect() is changed to cleanup afterwards. (The issue can be reproduced at least down to v4.4.x.) Cc: Wei Wang <weiwan@google.com> Cc: Eric Dumazet <edumazet@google.com> Fixes: 2b0a8c9eee81 ("tcp: add CDG congestion control") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09net: systemport: fix double shift of a vlan_tci by VLAN_PRIO_SHIFTColin Ian King
Currently the u16 skb->vlan_tci is being right shifted twice by VLAN_PRIO_SHIFT, once in the macro skb_vlan_tag_get_pri and explicitly by VLAN_PRIO_SHIFT afterwards. The combined shift amount is larger than the u16 so the end result is always zero. Remove the second explicit shift as this is extraneous. Fixes: 6e9fdb60d362 ("net: systemport: Add support for VLAN transmit acceleration") Addresses-Coverity: ("Operands don't affect result") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09bpf: net: Avoid incorrect bpf_sk_reuseport_detach callMartin KaFai Lau
bpf_sk_reuseport_detach is currently called when sk->sk_user_data is not NULL. It is incorrect because sk->sk_user_data may not be managed by the bpf's reuseport_array. It has been reported in [1] that, the bpf_sk_reuseport_detach() which is called from udp_lib_unhash() has corrupted the sk_user_data managed by l2tp. This patch solves it by using another bit (defined as SK_USER_DATA_BPF) of the sk_user_data pointer value. It marks that a sk_user_data is managed/owned by BPF. The patch depends on a PTRMASK introduced in commit f1ff5ce2cd5e ("net, sk_msg: Clear sk_user_data pointer on clone if tagged"). [ Note: sk->sk_user_data is used by bpf's reuseport_array only when a sk is added to the bpf's reuseport_array. i.e. doing setsockopt(SO_REUSEPORT) and having "sk->sk_reuseport == 1" alone will not stop sk->sk_user_data being used by other means. ] [1]: https://lore.kernel.org/netdev/20200706121259.GA20199@katalix.com/ Fixes: 5dc4c4b7d4e8 ("bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY") Reported-by: James Chapman <jchapman@katalix.com> Reported-by: syzbot+9f092552ba9a5efca5df@syzkaller.appspotmail.com Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: James Chapman <jchapman@katalix.com> Acked-by: James Chapman <jchapman@katalix.com> Link: https://lore.kernel.org/bpf/20200709061110.4019316-1-kafai@fb.com
2020-07-09bpf: net: Avoid copying sk_user_data of reuseport_array during sk_cloneMartin KaFai Lau
It makes little sense for copying sk_user_data of reuseport_array during sk_clone_lock(). This patch reuses the SK_USER_DATA_NOCOPY bit introduced in commit f1ff5ce2cd5e ("net, sk_msg: Clear sk_user_data pointer on clone if tagged"). It is used to mark the sk_user_data is not supposed to be copied to its clone. Although the cloned sk's sk_user_data will not be used/freed in bpf_sk_reuseport_detach(), this change can still allow the cloned sk's sk_user_data to be used by some other means. Freeing the reuseport_array's sk_user_data does not require a rcu grace period. Thus, the existing rcu_assign_sk_user_data_nocopy() is not used. Fixes: 5dc4c4b7d4e8 ("bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20200709061104.4018798-1-kafai@fb.com
2020-07-09Merge branch 'mptcp-introduce-msk-diag-interface'David S. Miller
Paolo Abeni says: ==================== mptcp: introduce msk diag interface This series implements the diag interface for the MPTCP sockets. Since the MPTCP protocol value can't be represented with the current diag uAPI, the first patch introduces an extended attribute allowing user-space to specify lager protocol values. The token APIs are then extended to allow traversing the whole token container. Patch 3 carries the actual diag interface implementation, and later patch bring-in some functional self-tests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09selftests/mptcp: add diag interface testsPaolo Abeni
basic functional test, triggering the msk diag interface code. Require appropriate iproute2 support, skip elsewhere. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09mptcp: add MPTCP socket diag interfacePaolo Abeni
exposes basic inet socket attribute, plus some MPTCP socket fields comprising PM status and MPTCP-level sequence numbers. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09mptcp: add msk interations helperPaolo Abeni
mptcp_token_iter_next() allow traversing all the MPTCP sockets inside the token container belonging to the given network namespace with a quite standard iterator semantic. That will be used by the next patch, but keep the API generic, as we plan to use this later for PM's sake. Additionally export mptcp_token_get_sock(), as it also will be used by the diag module. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09inet_diag: support for wider protocol numbersPaolo Abeni
After commit bf9765145b85 ("sock: Make sk_protocol a 16-bit value") the current size of 'sdiag_protocol' is not sufficient to represent the possible protocol values. This change introduces a new inet diag request attribute to let user space specify the relevant protocol number using u32 values. The attribute is parsed by inet diag core on get/dump command and the extended protocol value, if available, is preferred to 'sdiag_protocol' to lookup the diag handler. The parse attributed are exposed to all the diag handlers via the cb->data. Note that inet_diag_dump_one_icsk() is left unmodified, as it will not be used by protocol using the extended attribute. Suggested-by: David S. Miller <davem@davemloft.net> Co-developed-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09ethtool: fix genlmsg_put() failure handling in ethnl_default_dumpit()Michal Kubecek
If the genlmsg_put() call in ethnl_default_dumpit() fails, we bail out without checking if we already have some messages in current skb like we do with ethnl_default_dump_one() failure later. Therefore if existing messages almost fill up the buffer so that there is not enough space even for netlink and genetlink header, we lose all prepared messages and return and error. Rather than duplicating the skb->len check, move the genlmsg_put(), genlmsg_cancel() and genlmsg_end() calls into ethnl_default_dump_one(). This is also more logical as all message composition will be in ethnl_default_dump_one() and only iteration logic will be left in ethnl_default_dumpit(). Fixes: 728480f12442 ("ethtool: default handlers for GET requests") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09net: enetc: use eth_broadcast_addr() to assign broadcastXu Wang
This patch is to use eth_broadcast_addr() to assign broadcast address insetad of memset(). Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09net_sched: fix a memory leak in atm_tc_init()Cong Wang
When tcf_block_get() fails inside atm_tc_init(), atm_tc_put() is called to release the qdisc p->link.q. But the flow->ref prevents it to do so, as the flow->ref is still zero. Fix this by moving the p->link.ref initialization before tcf_block_get(). Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Reported-and-tested-by: syzbot+d411cff6ab29cc2c311b@syzkaller.appspotmail.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09qed: Populate nvm-file attributes while reading nvm config partition.Sudarsana Reddy Kalluru
NVM config file address will be modified when the MBI image is upgraded. Driver would return stale config values if user reads the nvm-config (via ethtool -d) in this state. The fix is to re-populate nvm attribute info while reading the nvm config values/partition. Changes from previous version: ------------------------------- v3: Corrected the formatting in 'Fixes' tag. v2: Added 'Fixes' tag. Fixes: 1ac4329a1cff ("qed: Add configuration information to register dump and debug data") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09drm/amdgpu: don't do soft recovery if gpu_recovery=0Marek Olšák
It's impossible to debug shader hangs with soft recovery. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-09drm/radeon: fix double freeTom Rix
clang static analysis flags this error drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc] kfree(rdev->pm.dpm.ps[i].ps_priv); ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc] kfree(rdev->pm.dpm.ps); ^~~~~~~~~~~~~~~~~~~~~~ problem is reported in ci_dpm_fini, with these code blocks. for (i = 0; i < rdev->pm.dpm.num_ps; i++) { kfree(rdev->pm.dpm.ps[i].ps_priv); } kfree(rdev->pm.dpm.ps); The first free happens in ci_parse_power_table where it cleans up locally on a failure. ci_dpm_fini also does a cleanup. ret = ci_parse_power_table(rdev); if (ret) { ci_dpm_fini(rdev); return ret; } So remove the cleanup in ci_parse_power_table and move the num_ps calculation to inside the loop so ci_dpm_fini will know how many array elements to free. Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-09drm/amd/display: add dmcub check on RENOIRAaron Ma
RENOIR loads dmub fw not dmcu, check dmcu only will prevent loading iram, it breaks backlight control. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208277 Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-09drm/amdgpu: add TMR destory function for pspHuang Rui
TMR is required to be destoried with GFX_CMD_ID_DESTROY_TMR while the system goes to suspend. Otherwise, PSP may return the failure state (0xFFFF007) on Gfx-2-PSP command GFX_CMD_ID_SETUP_TMR after do multiple times suspend/resume. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-09drm/amdgpu: asd function needs to be unloaded in suspend phaseHuang Rui
Unload ASD function in suspend phase. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-07-09cifs: update internal module version numberSteve French
To 2.28 Signed-off-by: Steve French <stfrench@microsoft.com>
2020-07-09cifs: fix reference leak for tlinkRonnie Sahlberg
Don't leak a reference to tlink during the NOTIFY ioctl Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org> # v5.6+
2020-07-09arm64/alternatives: don't patch up internal branchesArd Biesheuvel
Commit f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences") moved the alternatives replacement sequences into subsections, in order to keep the as close as possible to the code that they replace. Unfortunately, this broke the logic in branch_insn_requires_update, which assumed that any branch into kernel executable code was a branch that required updating, which is no longer the case now that the code sequences that are patched in are in the same section as the patch site itself. So the only way to discriminate branches that require updating and ones that don't is to check whether the branch targets the replacement sequence itself, and so we can drop the call to kernel_text_address() entirely. Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences") Reported-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20200709125953.30918-1-ardb@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-09s390/mm: fix huge pte soft dirty copyingJanosch Frank
If the pmd is soft dirty we must mark the pte as soft dirty (and not dirty). This fixes some cases for guest migration with huge page backings. Cc: <stable@vger.kernel.org> # 4.8 Fixes: bc29b7ac1d9f ("s390/mm: clean up pte/pmd encoding") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-09arm64: Add missing sentinel to erratum_1463225Florian Fainelli
When the erratum_1463225 array was introduced a sentinel at the end was missing thus causing a KASAN: global-out-of-bounds in is_affected_midr_range_list on arm64 error. Fixes: a9e821b89daa ("arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/linux-arm-kernel/CA+G9fYs3EavpU89-rTQfqQ9GgxAMgMAk7jiiVrfP0yxj5s+Q6g@mail.gmail.com/ Link: https://lore.kernel.org/r/20200709051345.14544-1-f.fainelli@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08io_uring: fix memleak in __io_sqe_files_update()Yang Yingliang
I got a memleak report when doing some fuzz test: BUG: memory leak unreferenced object 0xffff888113e02300 (size 488): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ a0 a4 ce 19 81 88 ff ff 60 ce 09 0d 81 88 ff ff ........`....... backtrace: [<00000000129a84ec>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<00000000129a84ec>] __alloc_file+0x25/0x310 fs/file_table.c:101 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 BUG: memory leak unreferenced object 0xffff8881152dd5e0 (size 16): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 16 bytes): 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000074caa794>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<0000000074caa794>] lsm_file_alloc security/security.c:567 [inline] [<0000000074caa794>] security_file_alloc+0x32/0x160 security/security.c:1440 [<00000000c6745ea3>] __alloc_file+0xba/0x310 fs/file_table.c:106 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If io_sqe_file_register() failed, we need put the file that get by fget() to avoid the memleak. Fixes: c3a31e605620 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08io_uring: export cq overflow status to userspaceXiaoguang Wang
For those applications which are not willing to use io_uring_enter() to reap and handle cqes, they may completely rely on liburing's io_uring_peek_cqe(), but if cq ring has overflowed, currently because io_uring_peek_cqe() is not aware of this overflow, it won't enter kernel to flush cqes, below test program can reveal this bug: static void test_cq_overflow(struct io_uring *ring) { struct io_uring_cqe *cqe; struct io_uring_sqe *sqe; int issued = 0; int ret = 0; do { sqe = io_uring_get_sqe(ring); if (!sqe) { fprintf(stderr, "get sqe failed\n"); break;; } ret = io_uring_submit(ring); if (ret <= 0) { if (ret != -EBUSY) fprintf(stderr, "sqe submit failed: %d\n", ret); break; } issued++; } while (ret > 0); assert(ret == -EBUSY); printf("issued requests: %d\n", issued); while (issued) { ret = io_uring_peek_cqe(ring, &cqe); if (ret) { if (ret != -EAGAIN) { fprintf(stderr, "peek completion failed: %s\n", strerror(ret)); break; } printf("left requets: %d\n", issued); continue; } io_uring_cqe_seen(ring, cqe); issued--; printf("left requets: %d\n", issued); } } int main(int argc, char *argv[]) { int ret; struct io_uring ring; ret = io_uring_queue_init(16, &ring, 0); if (ret) { fprintf(stderr, "ring setup failed: %d\n", ret); return 1; } test_cq_overflow(&ring); return 0; } To fix this issue, export cq overflow status to userspace by adding new IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08libnvdimm/security: Fix key lookup permissionsDan Williams
As of commit 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than a mask") lookup_user_key() needs an explicit declaration of what it wants to do with the key. Add KEY_NEED_SEARCH to fix a warning with the below signature, and fixes the inability to retrieve a key. WARNING: CPU: 15 PID: 6276 at security/keys/permission.c:35 key_task_permission+0xd3/0x140 [..] RIP: 0010:key_task_permission+0xd3/0x140 [..] Call Trace: lookup_user_key+0xeb/0x6b0 ? vsscanf+0x3df/0x840 ? key_validate+0x50/0x50 ? key_default_cmp+0x20/0x20 nvdimm_get_user_key_payload.part.0+0x21/0x110 [libnvdimm] nvdimm_security_store+0x67d/0xb20 [libnvdimm] security_store+0x67/0x1a0 [libnvdimm] kernfs_fop_write+0xcf/0x1c0 vfs_write+0xde/0x1d0 ksys_write+0x68/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Fixes: 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than a mask") Suggested-by: David Howells <dhowells@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/159297332630.1304143.237026690015653759.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-07-08RDMA/mlx5: Set PD pointers for the error flow unwindLeon Romanovsky
ib_pd is accessed internally during destroy of the TIR/TIS, but PD can be not set yet. This leading to the following kernel panic. BUG: kernel NULL pointer dereference, address: 0000000000000074 PGD 8000000079eaa067 P4D 8000000079eaa067 PUD 7ae81067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 709 Comm: syz-executor.0 Not tainted 5.8.0-rc3 #41 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:destroy_raw_packet_qp_tis drivers/infiniband/hw/mlx5/qp.c:1189 [inline] RIP: 0010:destroy_raw_packet_qp drivers/infiniband/hw/mlx5/qp.c:1527 [inline] RIP: 0010:destroy_qp_common+0x2ca/0x4f0 drivers/infiniband/hw/mlx5/qp.c:2397 Code: 00 85 c0 74 2e e8 56 18 55 ff 48 8d b3 28 01 00 00 48 89 ef e8 d7 d3 ff ff 48 8b 43 08 8b b3 c0 01 00 00 48 8b bd a8 0a 00 00 <0f> b7 50 74 e8 0d 6a fe ff e8 28 18 55 ff 49 8d 55 50 4c 89 f1 48 RSP: 0018:ffffc900007bbac8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88807949e800 RCX: 0000000000000998 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88807c180140 RBP: ffff88807b50c000 R08: 000000000002d379 R09: ffffc900007bba00 R10: 0000000000000001 R11: 000000000002d358 R12: ffff888076f37000 R13: ffff88807949e9c8 R14: ffffc900007bbe08 R15: ffff888076f37000 FS: 00000000019bf940(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000074 CR3: 0000000076d68004 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_ib_create_qp+0xf36/0xf90 drivers/infiniband/hw/mlx5/qp.c:3014 _ib_create_qp drivers/infiniband/core/core_priv.h:333 [inline] create_qp+0x57f/0xd20 drivers/infiniband/core/uverbs_cmd.c:1443 ib_uverbs_create_qp+0xcf/0x100 drivers/infiniband/core/uverbs_cmd.c:1564 ib_uverbs_write+0x5fa/0x780 drivers/infiniband/core/uverbs_main.c:664 __vfs_write+0x3f/0x90 fs/read_write.c:495 vfs_write+0xc7/0x1f0 fs/read_write.c:559 ksys_write+0x5e/0x110 fs/read_write.c:612 do_syscall_64+0x3e/0x70 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x466479 Code: Bad RIP value. RSP: 002b:00007ffd057b62b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000466479 RDX: 0000000000000070 RSI: 0000000020000240 RDI: 0000000000000003 RBP: 00000000019bf8fc R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000bf6 R14: 00000000004cb859 R15: 00000000006fefc0 Fixes: 6c41965d647a ("RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path") Link: https://lore.kernel.org/r/20200707110612.882962-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 00:00:51 +0000