| Age | Commit message (Collapse) | Author |
|---|
|
Apparently Acer Chromebook C740 (BDW-ULT) doesn't have the
eDP HPD line properly connected, and thus fails the new
HPD check during eDP probe. The result is that we lose the
eDP output.
I suspect all such machines would be Chromebooks or other
Linux exclusive systems as the Windows driver likely wouldn't
work either. I did check a few other BDW machines here and
those do have eDP HPD connected, one of them even is a
different Chromebook (Samus).
To account for these funky machines let's skip the HPD check when
it looks like the eDP port is the only one using that specific AUX
channel. In case of multiple ports sharing the same AUX CH (eg. on
Asrock B250M-HDV) we still do the check and thus should correctly
ignore the eDP port in favor of the other DP port (usually a DP->VGA
converter).
v2: Don't oops during list iteration
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9264
Fixes: cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230908052527.685-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
(cherry picked from commit 70052100fabec5d8c1b09c9959817a2f4517e6b5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Commit 5904de0d735b ("PM: hibernate: Do not get block device exclusively
in test_resume mode") fixes a hibernation issue under test_resume mode.
That commit is supposed to open the block device in non-exclusive mode
when in test_resume. However the code does the opposite, which is against
its description.
In summary, the swap device is only opened exclusively by swsusp_check()
with its corresponding *close(), and must be in non test_resume mode.
This is to avoid the race condition that different processes scribble the
device at the same time. All the other cases should use non-exclusive mode.
Fix it by really disabling exclusive mode under test_resume.
Fixes: 5904de0d735b ("PM: hibernate: Do not get block device exclusively in test_resume mode")
Closes: https://lore.kernel.org/lkml/000000000000761f5f0603324129@google.com/
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Chenzhou Feng <chenzhoux.feng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Several functions reply on snapshot_test to decide whether to
open the resume device exclusively. However there is no strict
connection between the snapshot_test and the open mode. Rename
the 'snapshot_test' input parameter to 'exclusive' to better reflect
the use case.
No functional change is expected.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
I got the below warning when do fuzzing test:
BUG: KASAN: null-ptr-deref in scatterwalk_copychunks+0x320/0x470
Read of size 4 at addr 0000000000000008 by task kworker/u8:1/9
CPU: 0 PID: 9 Comm: kworker/u8:1 Tainted: G OE
Hardware name: linux,dummy-virt (DT)
Workqueue: pencrypt_parallel padata_parallel_worker
Call trace:
dump_backtrace+0x0/0x420
show_stack+0x34/0x44
dump_stack+0x1d0/0x248
__kasan_report+0x138/0x140
kasan_report+0x44/0x6c
__asan_load4+0x94/0xd0
scatterwalk_copychunks+0x320/0x470
skcipher_next_slow+0x14c/0x290
skcipher_walk_next+0x2fc/0x480
skcipher_walk_first+0x9c/0x110
skcipher_walk_aead_common+0x380/0x440
skcipher_walk_aead_encrypt+0x54/0x70
ccm_encrypt+0x13c/0x4d0
crypto_aead_encrypt+0x7c/0xfc
pcrypt_aead_enc+0x28/0x84
padata_parallel_worker+0xd0/0x2dc
process_one_work+0x49c/0xbdc
worker_thread+0x124/0x880
kthread+0x210/0x260
ret_from_fork+0x10/0x18
This is because the value of rec_seq of tls_crypto_info configured by the
user program is too large, for example, 0xffffffffffffff. In addition, TLS
is asynchronously accelerated. When tls_do_encryption() returns
-EINPROGRESS and sk->sk_err is set to EBADMSG due to rec_seq overflow,
skmsg is released before the asynchronous encryption process ends. As a
result, the UAF problem occurs during the asynchronous processing of the
encryption module.
If the operation is asynchronous and the encryption module returns
EINPROGRESS, do not free the record information.
Fixes: 635d93981786 ("net/tls: free record only on encryption error")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20230909081434.2324940-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Forwarding to v6.6-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Cold functions and their non-cold counterparts can use _THIS_IP_ to
reference each other. Don't warn about !ENDBR in that case.
Note that for GCC this is currently irrelevant in light of the following
commit
c27cd083cfb9 ("Compiler attributes: GCC cold function alignment workarounds")
which disabled cold functions in the kernel. However this may still be
possible with Clang.
Fixes several warnings like the following:
drivers/scsi/bnx2i/bnx2i.prelink.o: warning: objtool: bnx2i_hw_ep_disconnect+0x19d: relocation to !ENDBR: bnx2i_hw_ep_disconnect.cold+0x0
drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr4_event.cold+0x28: relocation to !ENDBR: ipvlan_addr4_event+0xda
drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr6_event.cold+0x26: relocation to !ENDBR: ipvlan_addr6_event+0xb7
drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_set_ringparam.cold+0x17: relocation to !ENDBR: tg3_set_ringparam+0x115
drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_self_test.cold+0x17: relocation to !ENDBR: tg3_self_test+0x2e1
drivers/target/iscsi/cxgbit/cxgbit.prelink.o: warning: objtool: __cxgbit_free_conn.cold+0x24: relocation to !ENDBR: __cxgbit_free_conn+0xfb
net/can/can.prelink.o: warning: objtool: can_rx_unregister.cold+0x2c: relocation to !ENDBR: can_rx_unregister+0x11b
drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_spq_post+0xc0: relocation to !ENDBR: qed_spq_post.cold+0x9a
drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_iwarp_ll2_comp_syn_pkt.cold+0x12f: relocation to !ENDBR: qed_iwarp_ll2_comp_syn_pkt+0x34b
net/tipc/tipc.prelink.o: warning: objtool: tipc_nametbl_publish.cold+0x21: relocation to !ENDBR: tipc_nametbl_publish+0xa6
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/d8f1ab6a23a6105bc023c132b105f245c7976be6.1694476559.git.jpoimboe@kernel.org
|
|
The eventfs files list is protected by SRCU. In earlier iterations it was
protected with just RCU, but because it needed to also call sleepable
code, it had to be switch to SRCU. The dcache_dir_open_wrapper()
list_for_each_rcu() was missed and did not get converted over to
list_for_each_srcu(). That needs to be fixed.
Link: https://lore.kernel.org/linux-trace-kernel/20230911120053.ca82f545e7f46ea753deda18@kernel.org/
Link: https://lore.kernel.org/linux-trace-kernel/20230911200654.71ce927c@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ajay Kaher <akaher@vmware.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Reported-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 63940449555e7 ("eventfs: Implement eventfs lookup, read, open functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Create the config file in user_events directory of testcase which
need more kernel configuration than the default defconfig. User
could use these configs with merge_config.sh script:
The Kconfig CONFIG_USER_EVENTS=y is needed for the test to read
data from the following files,
- "/sys/kernel/tracing/user_events_data"
- "/sys/kernel/tracing/user_events_status"
- "/sys/kernel/tracing/events/user_events/*"
Enable config for specific testcase:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/user_events/config
Enable configs for all testcases:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/*/config
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When I'm debugging something with the ftrace selftests and need to look at
the logs, it becomes tedious that I need to do the following:
ls -ltr logs
[ copy the last directory ]
ls logs/<paste-last-dir>
to see where the logs are.
Instead, do the common practice of having a "latest" softlink to the last
run selftest. This way after running the selftest I only need to do:
ls logs/latest/
and it will always give me the directory of the last run selftest logs!
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When user_events is not installed the self tests currently fail. Now
that these self tests run by default we need to ensure they don't fail
when user_events was not enabled for the kernel being tested.
Add common methods to detect if tracefs and user_events is enabled. If
either is not enabled skip the test. If tracefs is enabled, but is not
mounted, mount tracefs and fail if there were any errors. Fail if not
run as root.
Fixes: 68b4d2d58389 ("selftests/user_events: Reenable build")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/all/CA+G9fYuugZ0OMeS6HvpSS4nuf_A3s455ecipGBvER0LJHojKZg@mail.gmail.com/
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
[HOW & Why]
There seems to be an issue with 2nd DPIA acquiring link encoder for tiled displays.
Solution is to remove check for eng_id before we get first dynamic encoder for it
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For DPIA we should have preferred DIG assignment based on DPIA selected
as per the ASIC design.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Fix the typo in the kernel-doc for @replay_mode to prevent
kernel-doc warnings:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:623: warning: Incorrect use of kernel-doc format: * @replay mode: Replay supported
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:626: warning: Function parameter or member 'replay_mode' not described in 'amdgpu_hdmi_vsdb_info'
Fixes: ec8e59cb4e0c ("drm/amd/display: Get replay info from VSDB")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On some APU systems, there is no atom context and so the
atom_context struct is null.
Add a check to the VBIOS_INFO branch of amdgpu_info_ioctl
to handle this case, returning all zeroes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The synth traces incorrectly print pointer to the synthetic event values
instead of the actual value when using u64 type. Fix by addressing the
contents of the union properly.
Link: https://lore.kernel.org/linux-trace-kernel/20230911141704.3585965-1-tero.kristo@linux.intel.com
Fixes: ddeea494a16f ("tracing/synthetic: Use union instead of casts")
Cc: stable@vger.kernel.org
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The code in kfd_mqd_manager_v11.c to support criu dump and
restore of queue state was missing.
Added it; should be equivalent to kfd_mqd_manager_v10.c.
CC: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To make handling BIG and LITTLE endian better the offset/len of dynamic
fields of the synthetic events was changed into a structure of:
struct trace_dynamic_info {
#ifdef CONFIG_CPU_BIG_ENDIAN
u16 offset;
u16 len;
#else
u16 len;
u16 offset;
#endif
};
to replace the manual changes of:
data_offset = offset & 0xffff;
data_offest = len << 16;
But if you look closely, the above is:
<len> << 16 | offset
Which in little endian would be in memory:
offset_lo offset_hi len_lo len_hi
and in big endian:
len_hi len_lo offset_hi offset_lo
Which if broken into a structure would be:
struct trace_dynamic_info {
#ifdef CONFIG_CPU_BIG_ENDIAN
u16 len;
u16 offset;
#else
u16 offset;
u16 len;
#endif
};
Which is the opposite of what was defined.
Fix this and just to be safe also add "__packed".
Link: https://lore.kernel.org/all/20230908154417.5172e343@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230908163929.2c25f3dc@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: ddeea494a16f3 ("tracing/synthetic: Use union instead of casts")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
[Why]
In drm_dp_mst_topology_mgr_resume() today, it will resume the
mst branch to be ready handling mst mode and also consecutively do
the mst topology probing. Which will cause the dirver have chance
to fire hotplug event before restoring the old state. Then Userspace
will react to the hotplug event based on a wrong state.
[How]
Adjust the mst resume flow as:
1. set dpcd to resume mst branch status
2. restore source old state
3. Do mst resume topology probing
For drm_dp_mst_topology_mgr_resume(), it's better to adjust it to
pull out topology probing work into a 2nd part procedure of the mst
resume. Will have a follow up patch in drm.
Reviewed-by: Chao-kai Wang <stylon.wang@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So driver doesn't generate incorrect message until
the new format is settled down for aqua_vanjaram
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Needed for HDP flush to work correctly.
Reviewed-by: Timmy Tsai <timmtsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This matches the behavior for soc15 and nv.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Timmy Tsai <timmtsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Currently the driver looks DCN registers to access if BL is on or not.
This check is not valid if we are using AUX based brightness control.
This causes driver to not send out "backlight off" command during power off
sequence as it already thinks it is off.
[How]
Only check DCN registers if we aren't using AUX based brightness control.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This loop will exit with "retry" set to -1 if it fails but the code
checks for if "retry" is zero. Fix this by changing post-op to a
pre-op. --retry vs retry--.
Fixes: e01eeffc3f86 ("drm/amd/pm: avoid driver getting empty metrics table for the first time")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Dirty rect can be used with replay, so enable them to allow for more
powersaving.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 70e64c4d522b732e31c6475a3be2349de337d321.
Since, we now have an actual fix for this issue, we can get rid of this
workaround as it can cause pin failures if enough VRAM isn't carved out
by the BIOS.
Cc: stable@vger.kernel.org # 6.1+
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Dropping bit 31:4 of page table base is wrong, it makes page table
base points to wrong address if phys addr is beyond 64GB; dropping
page_table_start/end bit 31:4 is unnecessary since dcn20_vmid_setup
will do that. Also, while we are at it, cleanup the assignments using
upper_32_bits()/lower_32_bits() and AMDGPU_GPU_PAGE_SHIFT.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)")
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Co-developed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When nr_hw_queues shrink, we free the excess tags before realloc'ing
hw_ctxs for each queue. During that resize, we may need to access those
tags, like blk_mq_tag_idle(hctx) will access queue shared tags.
This can cause a slab use-after-free, as reported by KASAN. Fix it by
moving the releasing of excess tags to the end.
Fixes: e1dd7bc93029 ("blk-mq: fix tags leak when shrink nr_hw_queues")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs_CK63uoDpGBGZ6DN4OCTpzkR3UaVgK=LX8Owr8ej2ieQ@mail.gmail.com/
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20230908005702.2183908-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The CU mask passed from user-space will change based on
different spatial partitioning mode. As a result, update
CU masking code for GFX9.4.3 to work for all partitioning
modes.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update cache info reporting in sysfs to report the correct
number of CUs and associated cache information based on
different spatial partitioning modes.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, we store CU info only for a single XCC assuming
that it is the same for all XCCs. However, that may not be
true. As a result, store CU info for all XCCs. This info is
later used for CU masking.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes the following unaligned 64-bit doorbell
warning seen when submitting packets on HIQ on GFX v9.4.3
by making the HIQ doorbell 64-bit aligned.
The warning is seen when GPU is loaded in any mode other
than SPX mode.
[ +0.000301] ------------[ cut here ]------------
[ +0.000003] Unaligned 64-bit doorbell
[ +0.000030] WARNING: /amdkfd/kfd_doorbell.c:339 write_kernel_doorbell64+0x72/0x80
[ +0.000003] RIP: 0010:write_kernel_doorbell64+0x72/0x80
[ +0.000004] RSP: 0018:ffffc90004287730 EFLAGS: 00010246
[ +0.000005] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ +0.000003] RDX: 0000000000000001 RSI: ffffffff82837c71 RDI: 00000000ffffffff
[ +0.000003] RBP: ffffc90004287748 R08: 0000000000000003 R09: 0000000000000001
[ +0.000002] R10: 000000000000001a R11: ffff88a034008198 R12: ffffc900013bd004
[ +0.000003] R13: 0000000000000008 R14: ffffc900042877b0 R15: 000000000000007f
[ +0.000003] FS: 00007fa8c7b62000(0000) GS:ffff889f88400000(0000) knlGS:0000000000000000
[ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000003] CR2: 000056111c45aaf0 CR3: 00000001414f2002 CR4: 0000000000770ee0
[ +0.000003] PKRU: 55555554
[ +0.000002] Call Trace:
[ +0.000004] <TASK>
[ +0.000006] kq_submit_packet+0x45/0x50 [amdgpu]
[ +0.000524] pm_send_set_resources+0x7f/0xc0 [amdgpu]
[ +0.000500] set_sched_resources+0xe4/0x160 [amdgpu]
[ +0.000503] start_cpsch+0x1c5/0x2a0 [amdgpu]
[ +0.000497] kgd2kfd_device_init.cold+0x816/0xb42 [amdgpu]
[ +0.000743] amdgpu_amdkfd_device_init+0x15f/0x1f0 [amdgpu]
[ +0.000602] amdgpu_device_init.cold+0x1813/0x2176 [amdgpu]
[ +0.000684] ? pci_bus_read_config_word+0x4a/0x80
[ +0.000012] ? do_pci_enable_device+0xdc/0x110
[ +0.000008] amdgpu_driver_load_kms+0x1a/0x110 [amdgpu]
[ +0.000545] amdgpu_pci_probe+0x197/0x400 [amdgpu]
Fixes: c31866651086 ("drm/amdgpu: use doorbell mgr for kfd kernel doorbells")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes the case where the code currently passes
absolute register address and not the reg offset, which HWS
expects, when sending the PM4 packet to set/update CWSR grace
period. Additionally, cleanup the signature of
build_grace_period_packet_info function as it no longer needs
the inst parameter.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a compile error when this commit is added:
md: raid1: fix potential OOB in raid1_remove_disk()
drivers/md/raid1.c: In function 'raid1_remove_disk':
drivers/md/raid1.c:1844:9: error: ISO C90 forbids mixed declarations
and code [-Werror=declaration-after-statement]
1844 | struct raid1_info *p = conf->mirrors + number;
| ^~~~~~
That's because the new code was inserted before the struct.
The change is move the struct command above this commit.
Fixes: 8b0472b50bcf ("md: raid1: fix potential OOB in raid1_remove_disk()")
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/46d929d0-2aab-4cf2-b2bf-338963e8ba5a@redhat.com
|
|
The UV code attempts to build a set of tables to allow it to do
bidirectional socket<=>node lookups.
But when nr_cpus is set to a smaller number than actually present, the
cpu_to_node() mapping information for unused CPUs is not available to
build_socket_tables(). This results in skipping some nodes or sockets
when creating the tables and leaving some -1's for later code to trip.
over, causing oopses.
The problem is that the socket<=>node lookups are created by doing a
loop over all CPUs, then looking up the CPU's APICID and socket. But
if a CPU is not present, there is no way to start this lookup.
Instead of looping over all CPUs, take CPUs out of the equation
entirely. Loop over all APICIDs which are mapped to a valid NUMA node.
Then just extract the socket-id from the APICID.
This avoid tripping over disabled CPUs.
Fixes: 8a50c5851927 ("x86/platform/uv: UV support for sub-NUMA clustering")
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230807141730.1117278-1-steve.wahl%40hpe.com
|
|
Add 'const' to the definition of the 'trip' argument of the
.get_trend() thermal zone callback to indicate that the trip point
passed to it should not be modified by it and adjust the
callback functions implementing it, thermal_get_trend() in the
ACPI thermal driver and __ti_thermal_get_trend(), accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
|
|
for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* nouveau: Lockdep workaround
* fbdev/g364fb: Build fix
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230911141915.GA983@linux-uq9g
|
|
Making sure the UCSI debugfs entry actually exists before
attempting to remove it.
Fixes: df0383ffad64 ("usb: typec: ucsi: Add debugfs for ucsi commands")
Reported-by: Dave Hansen <dave.hansen@intel.com>
Closes: https://lore.kernel.org/linux-usb/700df3c4-2f6c-85f9-6c61-065bc5b2db3a@intel.com/
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Link: https://lore.kernel.org/r/20230906084842.1922052-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add quirk for ASUS ROG X16 (GV601V, 2023 versions) Flow 2-in-1
to enable tablet mode with lid flip (all screen rotations).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230905082813.13470-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The only probing method supported by the Nvidia SN2201 platform driver
is probing through an ACPI match table. Hence add a dependency on
ACPI, to prevent asking the user about this driver when configuring a
kernel without ACPI support.
Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/ec5a4071691ab08d58771b7732a9988e89779268.1693828363.git.geert+renesas@glider.be
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The latest version of the mlxbf_bootctl driver utilizes
"sysfs_format_mac", and this API is only available if
NET is defined in the kernel configuration. This patch
changes the mlxbf_bootctl Kconfig to depend on NET.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This fix involves 2 changes:
- All event regs have a reset value of 0, which is not a valid
event_number as per the event_list for most blocks and hence seen
as an error. Add a "disable" event with event_number 0 for all blocks.
- The enable bit for each counter need not be checked before
reading the event info, and hence removed.
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/04d0213932d32681de1c716b54320ed894e52425.1693917738.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace sprintf with sysfs_emit where possible.
Size check in mlxbf_pmc_event_list_show should account for "\0".
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/bef39ef32319a31b32f999065911f61b0d3b17c3.1693917738.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This commit drops over-sized network packets to avoid tmfifo
queue stuck.
Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/9318936c2447f76db475c985ca6d91f057efcd41.1693322547.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This commit fixes tmfifo console stuck issue when the virtual
networking interface is in down state. In such case, the network
Rx descriptors runs out and causes the Rx network packet staying
in the head of the tmfifo thus blocking the console packets. The
fix is to drop the Rx network packet when no more Rx descriptors.
Function name mlxbf_tmfifo_release_pending_pkt() is also renamed
to mlxbf_tmfifo_release_pkt() to be more approperiate.
Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/8c0177dc938ae03f52ff7e0b62dbeee74b7bec09.1693322547.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
MT7988 SoC support 3 NICs. Fix pse_port configuration in
mtk_flow_set_output_device routine if the traffic is offloaded to eth2.
Rely on mtk_pse_port definitions.
Fixes: 88efedf517e6 ("net: ethernet: mtk_eth_soc: enable nft hw flowtable_offload for MT7988 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Variable dma_addr in function mtk_poll_rx can be uninitialized on
some of the error paths. In practise this doesn't matter, even random
data present in uninitialized stack memory can safely be used in the
way it happens in the error path.
However, in order to make Smatch happy make sure the variable is
always initialized.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some firmware (notably U-Boot) provides GetVariable() and
GetNextVariableName() but not QueryVariableInfo().
With commit d86ff3333cb1 ("efivarfs: expose used and total size") the
statfs syscall was broken for such firmware.
If QueryVariableInfo() does not exist or returns EFI_UNSUPPORTED, just
report the file system size as 0 as statfs_simple() previously did.
Fixes: d86ff3333cb1 ("efivarfs: expose used and total size")
Link: https://lore.kernel.org/all/20230910045445.41632-1-heinrich.schuchardt@canonical.com/
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
[ardb: log warning on QueryVariableInfo() failure]
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
syzbot reported a memory leak like below:
BUG: memory leak
unreferenced object 0xffff88810b088c00 (size 240):
comm "syz-executor186", pid 5012, jiffies 4294943306 (age 13.680s)
hex dump (first 32 bytes):
00 89 08 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff83e5d5ff>] __alloc_skb+0x1ef/0x230 net/core/skbuff.c:634
[<ffffffff84606e59>] alloc_skb include/linux/skbuff.h:1289 [inline]
[<ffffffff84606e59>] kcm_sendmsg+0x269/0x1050 net/kcm/kcmsock.c:815
[<ffffffff83e479c6>] sock_sendmsg_nosec net/socket.c:725 [inline]
[<ffffffff83e479c6>] sock_sendmsg+0x56/0xb0 net/socket.c:748
[<ffffffff83e47f55>] ____sys_sendmsg+0x365/0x470 net/socket.c:2494
[<ffffffff83e4c389>] ___sys_sendmsg+0xc9/0x130 net/socket.c:2548
[<ffffffff83e4c536>] __sys_sendmsg+0xa6/0x120 net/socket.c:2577
[<ffffffff84ad7bb8>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84ad7bb8>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
[<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
In kcm_sendmsg(), kcm_tx_msg(head)->last_skb is used as a cursor to append
newly allocated skbs to 'head'. If some bytes are copied, an error occurred,
and jumped to out_error label, 'last_skb' is left unmodified. A later
kcm_sendmsg() will use an obsoleted 'last_skb' reference, corrupting the
'head' frag_list and causing the leak.
This patch fixes this issue by properly updating the last allocated skb in
'last_skb'.
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-and-tested-by: syzbot+6f98de741f7dbbfc4ccb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6f98de741f7dbbfc4ccb
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the document of napi, there is no rx process when the
budget is 0. Therefore, r8152_poll() has to return 0 directly when the
budget is equal to 0.
Fixes: d2187f8e4454 ("r8152: divide the tx and rx bottom functions")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
