summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-13scsi: pm80xx: Use phy-specific SAS address when sending PHY_START commandMichal Grzedzicki
Some cards have more than one SAS address. Using an incorrect address causes communication issues with some devices like expanders. Closes: https://lore.kernel.org/linux-kernel/A57AEA84-5CA0-403E-8053-106033C73C70@fb.com/ Signed-off-by: Michal Grzedzicki <mge@meta.com> Link: https://lore.kernel.org/r/20230913155611.3183612-1-mge@meta.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13Merge branch '6.6/scsi-staging' into 6.6/scsi-fixesMartin K. Petersen
Pull in staged fixes for 6.6. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13Merge tag 'pmdomain-v6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull genpm / pmdomain rename from Ulf Hansson: "This renames the genpd subsystem to pmdomain. As discussed on LKML, using 'genpd' as the name of a subsystem isn't very self-explanatory and the acronym itself that means Generic PM Domain, is known only by a limited group of people. The suggestion to improve the situation is to rename the subsystem to 'pmdomain', which there seems to be a good consensus around using. Ideally it should indicate that its purpose is to manage Power Domains or 'PM domains' as we often also use within the Linux Kernel terminology" * tag 'pmdomain-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: Rename the genpd subsystem to pmdomain
2023-09-13Merge tag 'tpmdd-v6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm fix from Jarkko Sakkinen. * tag 'tpmdd-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: Fix typo in tpmrm class definition
2023-09-13Merge tag 'parisc-for-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - fix reference to exported symbols for parisc64 [Masahiro Yamada] - Block-TLB (BTLB) support on 32-bit CPUs - sparse and build-warning fixes * tag 'parisc-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: linux/export: fix reference to exported functions for parisc64 parisc: BTLB: Initialize BTLB tables at CPU startup parisc: firmware: Simplify calling non-PA20 functions parisc: BTLB: _edata symbol has to be page aligned for BTLB support parisc: BTLB: Add BTLB insert and purge firmware function wrappers parisc: BTLB: Clear possibly existing BTLB entries parisc: Prepare for Block-TLB support on 32-bit kernel parisc: shmparam.h: Document aliasing requirements of PA-RISC parisc: irq: Make irq_stack_union static to avoid sparse warning parisc: drivers: Fix sparse warning parisc: iosapic.c: Fix sparse warnings parisc: ccio-dma: Fix sparse warnings parisc: sba-iommu: Fix sparse warnigs parisc: sba: Fix compile warning wrt list of SBA devices parisc: sba_iommu: Fix build warning if procfs if disabled
2023-09-13Merge tag 'trace-v6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Add missing LOCKDOWN checks for eventfs callers When LOCKDOWN is active for tracing, it causes inconsistent state when some functions succeed and others fail. - Use dput() to free the top level eventfs descriptor There was a race between accesses and freeing it. - Fix a long standing bug that eventfs exposed due to changing timings by dynamically creating files. That is, If a event file is opened for an instance, there's nothing preventing the instance from being removed which will make accessing the files cause use-after-free bugs. - Fix a ring buffer race that happens when iterating over the ring buffer while writers are active. Check to make sure not to read the event meta data if it's beyond the end of the ring buffer sub buffer. - Fix the print trigger that disappeared because the test to create it was looking for the event dir field being filled, but now it has the "ef" field filled for the eventfs structure. - Remove the unused "dir" field from the event structure. - Fix the order of the trace_dynamic_info as it had it backwards for the offset and len fields for which one was for which endianess. - Fix NULL pointer dereference with eventfs_remove_rec() If an allocation fails in one of the eventfs_add_*() functions, the caller of it in event_subsystem_dir() or event_create_dir() assigns the result to the structure. But it's assigning the ERR_PTR and not NULL. This was passed to eventfs_remove_rec() which expects either a good pointer or a NULL, not ERR_PTR. The fix is to not assign the ERR_PTR to the structure, but to keep it NULL on error. - Fix list_for_each_rcu() to use list_for_each_srcu() in dcache_dir_open_wrapper(). One iteration of the code used RCU but because it had to call sleepable code, it had to be changed to use SRCU, but one of the iterations was missed. - Fix synthetic event print function to use "as_u64" instead of passing in a pointer to the union. To fix big/little endian issues, the u64 that represented several types was turned into a union to define the types properly. * tag 'trace-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: eventfs: Fix the NULL pointer dereference bug in eventfs_remove_rec() tracefs/eventfs: Use list_for_each_srcu() in dcache_dir_open_wrapper() tracing/synthetic: Print out u64 values properly tracing/synthetic: Fix order of struct trace_dynamic_info selftests/ftrace: Fix dependencies for some of the synthetic event tests tracing: Remove unused trace_event_file dir field tracing: Use the new eventfs descriptor for print trigger ring-buffer: Do not attempt to read past "commit" tracefs/eventfs: Free top level files on removal ring-buffer: Avoid softlockup in ring_buffer_resize() tracing: Have event inject files inc the trace array ref count tracing: Have option files inc the trace array ref count tracing: Have current_trace inc the trace array ref count tracing: Have tracing_max_latency inc the trace array ref count tracing: Increase trace array ref count on enable and filter files tracefs/eventfs: Use dput to free the toplevel events directory tracefs/eventfs: Add missing lockdown checks tracefs: Add missing lockdown check to tracefs_create_dir()
2023-09-13ksmbd: fix passing freed memory 'aux_payload_buf'Namjae Jeon
The patch e2b76ab8b5c9: "ksmbd: add support for read compound" leads to the following Smatch static checker warning: fs/smb/server/smb2pdu.c:6329 smb2_read() warn: passing freed memory 'aux_payload_buf' It doesn't matter that we're passing a freed variable because nbytes is zero. This patch set "aux_payload_buf = NULL" to make smatch silence. Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-09-13ksmbd: remove unneeded mark_inode_dirty in set_info_sec()Namjae Jeon
mark_inode_dirty will be called in notify_change(). This patch remove unneeded mark_inode_dirty in set_info_sec(). Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-09-13x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domainRicardo Neri
Commit 8f2d6c41e5a6 ("x86/sched: Rewrite topology setup") dropped the SD_ASYM_PACKING flag in the DIE domain added in commit 044f0e27dec6 ("x86/sched: Add the SD_ASYM_PACKING flag to the die domain of hybrid processors"). Restore it on hybrid processors. The die-level domain does not depend on any build configuration and now x86_sched_itmt_flags() is always needed. Remove the build dependency on CONFIG_SCHED_[SMT|CLUSTER|MC]. Fixes: 8f2d6c41e5a6 ("x86/sched: Rewrite topology setup") Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Caleb Callaway <caleb.callaway@intel.com> Link: https://lkml.kernel.org/r/20230815035747.11529-1-ricardo.neri-calderon@linux.intel.com
2023-09-13sched/fair: Fix SMT4 group_smt_balance handlingTim Chen
For SMT4, any group with more than 2 tasks will be marked as group_smt_balance. Retain the behaviour of group_has_spare by marking the busiest group as the group which has the least number of idle_cpus. Also, handle rounding effect of adding (ncores_local + ncores_busy) when the local is fully idle and busy group imbalance is less than 2 tasks. Local group should try to pull at least 1 task in this case so imbalance should be set to 2 instead. Fixes: fee1759e4f04 ("sched/fair: Determine active load balance for SMT sched groups") Acked-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/6cd1633036bb6b651af575c32c2a9608a106702c.camel@linux.intel.com
2023-09-13igb: clean up in all error paths when enabling SR-IOVCorinna Vinschen
After commit 50f303496d92 ("igb: Enable SR-IOV after reinit"), removing the igb module could hang or crash (depending on the machine) when the module has been loaded with the max_vfs parameter set to some value != 0. In case of one test machine with a dual port 82580, this hang occurred: [ 232.480687] igb 0000:41:00.1: removed PHC on enp65s0f1 [ 233.093257] igb 0000:41:00.1: IOV Disabled [ 233.329969] pcieport 0000:40:01.0: AER: Multiple Uncorrected (Non-Fatal) err0 [ 233.340302] igb 0000:41:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fata) [ 233.352248] igb 0000:41:00.0: device [8086:1516] error status/mask=00100000 [ 233.361088] igb 0000:41:00.0: [20] UnsupReq (First) [ 233.368183] igb 0000:41:00.0: AER: TLP Header: 40000001 0000040f cdbfc00c c [ 233.376846] igb 0000:41:00.1: PCIe Bus Error: severity=Uncorrected (Non-Fata) [ 233.388779] igb 0000:41:00.1: device [8086:1516] error status/mask=00100000 [ 233.397629] igb 0000:41:00.1: [20] UnsupReq (First) [ 233.404736] igb 0000:41:00.1: AER: TLP Header: 40000001 0000040f cdbfc00c c [ 233.538214] pci 0000:41:00.1: AER: can't recover (no error_detected callback) [ 233.538401] igb 0000:41:00.0: removed PHC on enp65s0f0 [ 233.546197] pcieport 0000:40:01.0: AER: device recovery failed [ 234.157244] igb 0000:41:00.0: IOV Disabled [ 371.619705] INFO: task irq/35-aerdrv:257 blocked for more than 122 seconds. [ 371.627489] Not tainted 6.4.0-dirty #2 [ 371.632257] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this. [ 371.641000] task:irq/35-aerdrv state:D stack:0 pid:257 ppid:2 f0 [ 371.650330] Call Trace: [ 371.653061] <TASK> [ 371.655407] __schedule+0x20e/0x660 [ 371.659313] schedule+0x5a/0xd0 [ 371.662824] schedule_preempt_disabled+0x11/0x20 [ 371.667983] __mutex_lock.constprop.0+0x372/0x6c0 [ 371.673237] ? __pfx_aer_root_reset+0x10/0x10 [ 371.678105] report_error_detected+0x25/0x1c0 [ 371.682974] ? __pfx_report_normal_detected+0x10/0x10 [ 371.688618] pci_walk_bus+0x72/0x90 [ 371.692519] pcie_do_recovery+0xb2/0x330 [ 371.696899] aer_process_err_devices+0x117/0x170 [ 371.702055] aer_isr+0x1c0/0x1e0 [ 371.705661] ? __set_cpus_allowed_ptr+0x54/0xa0 [ 371.710723] ? __pfx_irq_thread_fn+0x10/0x10 [ 371.715496] irq_thread_fn+0x20/0x60 [ 371.719491] irq_thread+0xe6/0x1b0 [ 371.723291] ? __pfx_irq_thread_dtor+0x10/0x10 [ 371.728255] ? __pfx_irq_thread+0x10/0x10 [ 371.732731] kthread+0xe2/0x110 [ 371.736243] ? __pfx_kthread+0x10/0x10 [ 371.740430] ret_from_fork+0x2c/0x50 [ 371.744428] </TASK> The reproducer was a simple script: #!/bin/sh for i in `seq 1 5`; do modprobe -rv igb modprobe -v igb max_vfs=1 sleep 1 modprobe -rv igb done It turned out that this could only be reproduce on 82580 (quad and dual-port), but not on 82576, i350 and i210. Further debugging showed that igb_enable_sriov()'s call to pci_enable_sriov() is failing, because dev->is_physfn is 0 on 82580. Prior to commit 50f303496d92 ("igb: Enable SR-IOV after reinit"), igb_enable_sriov() jumped into the "err_out" cleanup branch. After this commit it only returned the error code. So the cleanup didn't take place, and the incorrect VF setup in the igb_adapter structure fooled the igb driver into assuming that VFs have been set up where no VF actually existed. Fix this problem by cleaning up again if pci_enable_sriov() fails. Fixes: 50f303496d92 ("igb: Enable SR-IOV after reinit") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13ixgbe: fix timestamp configuration codeVadim Fedorenko
The commit in fixes introduced flags to control the status of hardware configuration while processing packets. At the same time another structure is used to provide configuration of timestamper to user-space applications. The way it was coded makes this structures go out of sync easily. The repro is easy for 82599 chips: [root@hostname ~]# hwstamp_ctl -i eth0 -r 12 -t 1 current settings: tx_type 0 rx_filter 0 new settings: tx_type 1 rx_filter 12 The eth0 device is properly configured to timestamp any PTPv2 events. [root@hostname ~]# hwstamp_ctl -i eth0 -r 1 -t 1 current settings: tx_type 1 rx_filter 12 SIOCSHWTSTAMP failed: Numerical result out of range The requested time stamping mode is not supported by the hardware. The error is properly returned because HW doesn't support all packets timestamping. But the adapter->flags is cleared of timestamp flags even though no HW configuration was done. From that point no RX timestamps are received by user-space application. But configuration shows good values: [root@hostname ~]# hwstamp_ctl -i eth0 current settings: tx_type 1 rx_filter 12 Fix the issue by applying new flags only when the HW was actually configured. Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13i2c: cadence: Fix the kernel-doc warningsShubhrajyoti Datta
This fixes the below warnings drivers/i2c/busses/i2c-cadence.c:221: warning: Function parameter or member 'rinfo' not described in 'cdns_i2c' Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308171510.bKHBcZQW-lkp@intel.com/ Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13pmdomain: Rename the genpd subsystem to pmdomainUlf Hansson
It has been pointed out that naming a subsystem "genpd" isn't very self-explanatory and the acronym itself that means Generic PM Domain, is known only by a limited group of people. In a way to improve the situation, let's rename the subsystem to pmdomain, which ideally should indicate that this is about so called Power Domains or "PM domains" as we often also use within the Linux Kernel terminology. Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230912221127.487327-1-ulf.hansson@linaro.org
2023-09-13i2c: aspeed: Reset the i2c controller when timeout occursTommy Huang
Reset the i2c controller when an i2c transfer timeout occurs. The remaining interrupts and device should be reset to avoid unpredictable controller behavior. Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support") Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13i2c: I2C_MLXCPLD on ARM64 should depend on ACPIGeert Uytterhoeven
The "i2c_mlxcpld" platform device is only instantiated on X86 systems (through drivers/platform/x86/mlx-platform.c), or on ARM64 systems with ACPI (through drivers/platform/mellanox/nvsw-sn2201.c). Hence further restrict the dependency on ARM64 to ACPI, to prevent asking the user about this driver when configuring an ARM64 kernel without ACPI support. While at it, document in the Kconfig help text that the driver supports ARM64/ACPI based systems, too. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Vadim Pasternak <vadimp@nvidia.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13i2c: Make I2C_ATR invisibleGeert Uytterhoeven
I2C Address Translator (ATR) support is not a stand-alone driver, but a library. All of its users select I2C_ATR. Hence there is no need for the user to enable this symbol manually, except when compile-testing. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13i2c: Drop legacy callback .probe_new()Uwe Kleine-König
Now that all drivers are converted to the (new) .probe() callback, the temporary .probe_new() can go away. \o/ Link: https://lore.kernel.org/linux-i2c/20230626094548.559542-1-u.kleine-koenig@pengutronix.de Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13w1: ds2482: Switch back to use struct i2c_driver's .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/lkml/20230612072807.839689-1-u.kleine-koenig@pengutronix.de/ Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-13Documentation: embargoed-hardware-issues.rst: Add myself for RISC-VPalmer Dabbelt
I'm not sure exactly how RISC-V fits into the story here, but I'm happy to voluteer a sort of catch-all for vendors who aren't otherwise represented. Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230912180657.31841-1-palmer@rivosinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13Merge branch 'tcp-bind-fixes'David S. Miller
Kuniyuki Iwashima says: ==================== tcp: Fix bind() regression for v4-mapped-v6 address Since bhash2 was introduced, bind() is broken in two cases related to v4-mapped-v6 address. This series fixes the regression and adds test to cover the cases. Changes: v2: * Added patch 1 to factorise duplicated comparison (Eric Dumazet) v1: https://lore.kernel.org/netdev/20230911165106.39384-1-kuniyu@amazon.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.Kuniyuki Iwashima
We add these 8 test cases in bind_wildcard.c to check bind() conflicts. 1st bind() 2nd bind() --------- --------- 0.0.0.0 ::FFFF:0.0.0.0 ::FFFF:0.0.0.0 0.0.0.0 0.0.0.0 ::FFFF:127.0.0.1 ::FFFF:127.0.0.1 0.0.0.0 127.0.0.1 ::FFFF:0.0.0.0 ::FFFF:0.0.0.0 127.0.0.1 127.0.0.1 ::FFFF:127.0.0.1 ::FFFF:127.0.0.1 127.0.0.1 All test passed without bhash2 and with bhash2 and this series. Before bhash2: $ uname -r 6.0.0-rc1-00393-g0bf73255d3a3 $ ./bind_wildcard ... # PASSED: 16 / 16 tests passed. Just after bhash2: $ uname -r 6.0.0-rc1-00394-g28044fc1d495 $ ./bind_wildcard ... ok 15 bind_wildcard.v4_local_v6_v4mapped_local.v4_v6 not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4 # FAILED: 15 / 16 tests passed. On net.git: $ ./bind_wildcard ... not ok 14 bind_wildcard.v4_local_v6_v4mapped_any.v6_v4 not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4 # FAILED: 13 / 16 tests passed. With this series: $ ./bind_wildcard ... # PASSED: 16 / 16 tests passed. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.Kuniyuki Iwashima
This is a preparation patch for the following patch. Let's define expected_errno in each test case so that we can add other test cases easily. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13selftest: tcp: Fix address length in bind_wildcard.c.Kuniyuki Iwashima
The selftest passes the IPv6 address length for an IPv4 address. We should pass the correct length. Note inet_bind_sk() does not check if the size is larger than sizeof(struct sockaddr_in), so there is no real bug in this selftest. Fixes: 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.Kuniyuki Iwashima
Since bhash2 was introduced, the example below does not work as expected. These two bind() should conflict, but the 2nd bind() now succeeds. from socket import * s1 = socket(AF_INET6, SOCK_STREAM) s1.bind(('::ffff:127.0.0.1', 0)) s2 = socket(AF_INET, SOCK_STREAM) s2.bind(('127.0.0.1', s1.getsockname()[1])) During the 2nd bind() in inet_csk_get_port(), inet_bind2_bucket_find() fails to find the 1st socket's tb2, so inet_bind2_bucket_create() allocates a new tb2 for the 2nd socket. Then, we call inet_csk_bind_conflict() that checks conflicts in the new tb2 by inet_bhash2_conflict(). However, the new tb2 does not include the 1st socket, thus the bind() finally succeeds. In this case, inet_bind2_bucket_match() must check if AF_INET6 tb2 has the conflicting v4-mapped-v6 address so that inet_bind2_bucket_find() returns the 1st socket's tb2. Note that if we bind two sockets to 127.0.0.1 and then ::FFFF:127.0.0.1, the 2nd bind() fails properly for the same reason mentinoed in the previous commit. Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13tcp: Fix bind() regression for v4-mapped-v6 wildcard address.Kuniyuki Iwashima
Andrei Vagin reported bind() regression with strace logs. If we bind() a TCPv6 socket to ::FFFF:0.0.0.0 and then bind() a TCPv4 socket to 127.0.0.1, the 2nd bind() should fail but now succeeds. from socket import * s1 = socket(AF_INET6, SOCK_STREAM) s1.bind(('::ffff:0.0.0.0', 0)) s2 = socket(AF_INET, SOCK_STREAM) s2.bind(('127.0.0.1', s1.getsockname()[1])) During the 2nd bind(), if tb->family is AF_INET6 and sk->sk_family is AF_INET in inet_bind2_bucket_match_addr_any(), we still need to check if tb has the v4-mapped-v6 wildcard address. The example above does not work after commit 5456262d2baa ("net: Fix incorrect address comparison when searching for a bind2 bucket"), but the blamed change is not the commit. Before the commit, the leading zeros of ::FFFF:0.0.0.0 were treated as 0.0.0.0, and the sequence above worked by chance. Technically, this case has been broken since bhash2 was introduced. Note that if we bind() two sockets to 127.0.0.1 and then ::FFFF:0.0.0.0, the 2nd bind() fails properly because we fall back to using bhash to detect conflicts for the v4-mapped-v6 address. Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Reported-by: Andrei Vagin <avagin@google.com> Closes: https://lore.kernel.org/netdev/ZPuYBOFC8zsK6r9T@google.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13tcp: Factorise sk_family-independent comparison in ↵Kuniyuki Iwashima
inet_bind2_bucket_match(_addr_any). This is a prep patch to make the following patches cleaner that touch inet_bind2_bucket_match() and inet_bind2_bucket_match_addr_any(). Both functions have duplicated comparison for netns, port, and l3mdev. Let's factorise them. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-12drm/amdkfd: Insert missing TLB flush on GFX10 and laterHarish Kasiviswanathan
Heavy-weight TLB flush is required after unmap on all GPUs for correctness and security. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-09-12selinux: fix handling of empty opts in selinux_fs_context_submount()Ondrej Mosnacek
selinux_set_mnt_opts() relies on the fact that the mount options pointer is always NULL when all options are unset (specifically in its !selinux_initialized() branch. However, the new selinux_fs_context_submount() hook breaks this rule by allocating a new structure even if no options are set. That causes any submount created before a SELinux policy is loaded to be rejected in selinux_set_mnt_opts(). Fix this by making selinux_fs_context_submount() leave fc->security set to NULL when there are no options to be copied from the reference superblock. Cc: <stable@vger.kernel.org> Reported-by: Adam Williamson <awilliam@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2236345 Fixes: d80a8f1b58c2 ("vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-09-12riscv: errata: fix T-Head dcache.cva encodingIcenowy Zheng
The dcache.cva encoding shown in the comments are wrong, it's for dcache.cval1 (which is restricted to L1) instead. Fix this in the comment and in the hardcoded instruction. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Tested-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guo Ren <guoren@kernel.org> Tested-by: Drew Fustini <dfustini@baylibre.com> Link: https://lore.kernel.org/r/20230912072410.2481-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-12riscv: kexec: Align the kexeced kernel entrySong Shuai
The current riscv boot protocol requires 2MB alignment for RV64 and 4MB alignment for RV32. In KEXEC_FILE path, the elf_find_pbase() function should align the kexeced kernel entry according to the requirement, otherwise the kexeced kernel would silently BUG at the setup_vm(). Fixes: 8acea455fafa ("RISC-V: Support for kexec_file on panic") Signed-off-by: Song Shuai <songshuaishuai@tinylab.org> Link: https://lore.kernel.org/r/20230906095817.364390-1-songshuaishuai@tinylab.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-12tpm: Fix typo in tpmrm class definitionJustin M. Forbes
Commit d2e8071bed0be ("tpm: make all 'class' structures const") unfortunately had a typo for the name on tpmrm. Fixes: d2e8071bed0b ("tpm: make all 'class' structures const") Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-09-12smb3: move server check earlier when setting channel sequence numberSteve French
Smatch warning pointed out by Dan Carpenter: fs/smb/client/smb2pdu.c:105 smb2_hdr_assemble() warn: variable dereferenced before check 'server' (see line 95) Fixes: 09ee7a3bf866 ("[SMB3] send channel sequence number in SMB3 requests after reconnects") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-09-12Merge tag 'for-6.6-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - several fixes for handling directory item (inserting, removing, iteration, error handling) - fix transaction commit stalls when auto relocation is running and blocks other tasks that want to commit - fix a build error when DEBUG is enabled - fix lockdep warning in inode number lookup ioctl - fix race when finishing block group creation - remove link to obsolete wiki in several files * tag 'for-6.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: MAINTAINERS: remove links to obsolete btrfs.wiki.kernel.org btrfs: assert delayed node locked when removing delayed item btrfs: remove BUG() after failure to insert delayed dir index item btrfs: improve error message after failure to add delayed dir index item btrfs: fix a compilation error if DEBUG is defined in btree_dirty_folio btrfs: check for BTRFS_FS_ERROR in pending ordered assert btrfs: fix lockdep splat and potential deadlock after failure running delayed items btrfs: do not block starts waiting on previous transaction commit btrfs: release path before inode lookup during the ino lookup ioctl btrfs: fix race between finishing block group creation and its item update
2023-09-12Merge tag 'platform-drivers-x86-v6.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - various platform/mellanox fixes - one new DMI quirk for asus-wmi * tag 'platform-drivers-x86-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: asus-wmi: Support 2023 ROG X16 tablet mode platform/mellanox: NVSW_SN2201 should depend on ACPI platform/mellanox: mlxbf-bootctl: add NET dependency into Kconfig platform/mellanox: mlxbf-pmc: Fix reading of unprogrammed events platform/mellanox: mlxbf-pmc: Fix potential buffer overflows platform/mellanox: mlxbf-tmfifo: Drop jumbo frames platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors
2023-09-12ipv6: fix ip6_sock_set_addr_preferences() typoEric Dumazet
ip6_sock_set_addr_preferences() second argument should be an integer. SUNRPC attempts to set IPV6_PREFER_SRC_PUBLIC were translated to IPV6_PREFER_SRC_TMP Fixes: 18d5ad623275 ("ipv6: add ip6_sock_set_addr_preferences") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230911154213.713941-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-12Merge tag 'linux-kselftest-next-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: - kselftest runner script to propagate SIGTERM to runner child to avoid kselftest hang - install symlinks required for test execution to avoid test failures - kselftest dependency checker script argument parsing * tag 'linux-kselftest-next-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: Keep symlinks, when possible selftests: fix dependency checker script kselftest/runner.sh: Propagate SIGTERM to runner child selftests/ftrace: Correctly enable event in instance-event.tc
2023-09-12nvme-pci: do not set the NUMA node of device if it has nonePratyush Yadav
If a device has no NUMA node information associated with it, the driver puts the device in node first_memory_node (say node 0). Not having a NUMA node and being associated with node 0 are completely different things and it makes little sense to mix the two. Signed-off-by: Pratyush Yadav <ptyadav@amazon.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-09-12Merge tag 'linux-kselftest-kunit-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan: "Fixes to possible memory leak, null-ptr-deref, wild-memory-access, and error path bugs" * tag 'linux-kselftest-kunit-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Fix possible memory leak in kunit_filter_suites() kunit: Fix possible null-ptr-deref in kunit_parse_glob_filter() kunit: Fix the wrong err path and add goto labels in kunit_filter_suites() kunit: Fix wild-memory-access bug in kunit_free_suite_set() kunit: test: Make filter strings in executor_test writable
2023-09-12Merge tag 'ovl-fixes-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs Pull overlayfs fixes from Amir Goldstein: "Two fixes for pretty old regressions" * tag 'ovl-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: ovl: fix incorrect fdput() on aio completion ovl: fix failed copyup of fileattr on a symlink
2023-09-12x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()Peter Zijlstra
Commit cb855971d717 ("x86/putuser: Provide room for padding") changed __put_user_nocheck_*() into proper functions but failed to note that SYM_FUNC_START() already provides ENDBR, rendering the explicit ENDBR superfluous. Fixes: cb855971d717 ("x86/putuser: Provide room for padding") Reported-by: David Kaplan <David.Kaplan@amd.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230802110323.086971726@infradead.org
2023-09-12x86/ibt: Suppress spurious ENDBRPeter Zijlstra
It was reported that under certain circumstances GCC emits ENDBR instructions for _THIS_IP_ usage. Specifically, when it appears at the start of a basic block -- but not elsewhere. Since _THIS_IP_ is never used for control flow, these ENDBR instructions are completely superfluous. Override the _THIS_IP_ definition for x86_64 to avoid this. Less ENDBR instructions is better. Fixes: 156ff4a544ae ("x86/ibt: Base IBT bits") Reported-by: David Kaplan <David.Kaplan@amd.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230802110323.016197440@infradead.org
2023-09-12linux/export: fix reference to exported functions for parisc64Masahiro Yamada
John David Anglin reported parisc has been broken since commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost"). Like ia64, parisc64 uses a function descriptor. The function references must be prefixed with P%. Also, symbols prefixed $$ from the library have the symbol type STT_LOPROC instead of STT_FUNC. They should be handled as functions too. Fixes: ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost") Reported-by: John David Anglin <dave.anglin@bell.net> Tested-by: John David Anglin <dave.anglin@bell.net> Tested-by: Helge Deller <deller@gmx.de> Closes: https://lore.kernel.org/linux-parisc/1901598a-e11d-f7dd-a5d9-9a69d06e6b6e@bell.net/T/#u Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2023-09-12selftests: tracing: Fix to unmount tracefs for recovering environmentMasami Hiramatsu (Google)
Fix to unmount the tracefs if the ftracetest mounted it for recovering system environment. If the tracefs is already mounted, this does nothing. Suggested-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/all/29fce076-746c-4650-8358-b4e0fa215cf7@sirena.org.uk/ Fixes: cbd965bde74c ("ftrace/selftests: Return the skip code when tracing directory not configured in kernel") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-12veth: Update XDP feature set when bringing up deviceToke Høiland-Jørgensen
There's an early return in veth_set_features() if the device is in a down state, which leads to the XDP feature flags not being updated when enabling GRO while the device is down. Which in turn leads to XDP_REDIRECT not working, because the redirect code now checks the flags. Fix this by updating the feature flags after bringing the device up. Before this patch: NETDEV_XDP_ACT_BASIC: yes NETDEV_XDP_ACT_REDIRECT: yes NETDEV_XDP_ACT_NDO_XMIT: no NETDEV_XDP_ACT_XSK_ZEROCOPY: no NETDEV_XDP_ACT_HW_OFFLOAD: no NETDEV_XDP_ACT_RX_SG: yes NETDEV_XDP_ACT_NDO_XMIT_SG: no After this patch: NETDEV_XDP_ACT_BASIC: yes NETDEV_XDP_ACT_REDIRECT: yes NETDEV_XDP_ACT_NDO_XMIT: yes NETDEV_XDP_ACT_XSK_ZEROCOPY: no NETDEV_XDP_ACT_HW_OFFLOAD: no NETDEV_XDP_ACT_RX_SG: yes NETDEV_XDP_ACT_NDO_XMIT_SG: yes Fixes: fccca038f300 ("veth: take into account device reconfiguration for xdp_features flag") Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20230911135826.722295-1-toke@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-12eventfs: Fix the NULL pointer dereference bug in eventfs_remove_rec()Jinjie Ruan
Inject fault while probing btrfs.ko, if kstrdup() fails in eventfs_prepare_ef() in eventfs_add_dir(), it will return ERR_PTR to assign file->ef. But the eventfs_remove() check NULL in trace_module_remove_events(), which causes the below NULL pointer dereference. As both Masami and Steven suggest, allocater side should handle the error carefully and remove it, so fix the places where it failed. Could not create tracefs 'raid56_write' directory Btrfs loaded, zoned=no, fsverity=no Unable to handle kernel NULL pointer dereference at virtual address 000000000000001c Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000102544000 [000000000000001c] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: btrfs(-) libcrc32c xor xor_neon raid6_pq cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: btrfs] CPU: 15 PID: 1343 Comm: rmmod Tainted: G N 6.5.0+ #40 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : eventfs_remove_rec+0x24/0xc0 lr : eventfs_remove+0x68/0x1d8 sp : ffff800082d63b60 x29: ffff800082d63b60 x28: ffffb84b80ddd00c x27: ffffb84b3054ba40 x26: 0000000000000002 x25: ffff800082d63bf8 x24: ffffb84b8398e440 x23: ffffb84b82af3000 x22: dead000000000100 x21: dead000000000122 x20: ffff800082d63bf8 x19: fffffffffffffff4 x18: ffffb84b82508820 x17: 0000000000000000 x16: 0000000000000000 x15: 000083bc876a3166 x14: 000000000000006d x13: 000000000000006d x12: 0000000000000000 x11: 0000000000000001 x10: 00000000000017e0 x9 : 0000000000000001 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffffb84b84289804 x5 : 0000000000000000 x4 : 9696969696969697 x3 : ffff33a5b7601f38 x2 : 0000000000000000 x1 : ffff800082d63bf8 x0 : fffffffffffffff4 Call trace: eventfs_remove_rec+0x24/0xc0 eventfs_remove+0x68/0x1d8 remove_event_file_dir+0x88/0x100 event_remove+0x140/0x15c trace_module_notify+0x1fc/0x230 notifier_call_chain+0x98/0x17c blocking_notifier_call_chain+0x4c/0x74 __arm64_sys_delete_module+0x1a4/0x298 invoke_syscall+0x44/0x100 el0_svc_common.constprop.1+0x68/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x3c/0xc4 el0t_64_sync_handler+0xa0/0xc4 el0t_64_sync+0x174/0x178 Code: 5400052c a90153b3 aa0003f3 aa0103f4 (f9401400) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: 0x384b00c00000 from 0xffff800080000000 PHYS_OFFSET: 0xffffcc5b80000000 CPU features: 0x88000203,3c020000,1000421b Memory Limit: none Rebooting in 1 seconds.. Link: https://lore.kernel.org/linux-trace-kernel/20230912134752.1838524-1-ruanjinjie@huawei.com Link: https://lore.kernel.org/all/20230912025808.668187-1-ruanjinjie@huawei.com/ Link: https://lore.kernel.org/all/20230911052818.1020547-1-ruanjinjie@huawei.com/ Link: https://lore.kernel.org/all/20230909072817.182846-1-ruanjinjie@huawei.com/ Link: https://lore.kernel.org/all/20230908074816.3724716-1-ruanjinjie@huawei.com/ Cc: Ajay Kaher <akaher@vmware.com> Fixes: 5bdcd5f5331a ("eventfs: Implement removal of meta data from eventfs") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-12driver core: return an error when dev_set_name() hasn't happenedAndy Shevchenko
The commit d21fdd07cea4 ("driver core: Return proper error code when dev_set_name() fails") rewrote the logic of handling the dev_set_name() error codes, but missed the point that initially set error value to -EINVAL might be rewritten and hence the error path can't be triggered at some circumstances. To fix this, make sure that error variable is set to -EINVAL when other conditionals are false. Reported-by: syzbot+bdfb03b1ec8b342c12cb@syzkaller.appspotmail.com Fixes: d21fdd07cea4 ("driver core: Return proper error code when dev_set_name() fails") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230828145824.3895288-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-12Revert "comedi: add HAS_IOPORT dependencies"Ian Abbott
This reverts commit b5c75b68b7ded84d4c82118974ce3975a4dcaa74. The commit makes it impossible to select configuration options that depend on COMEDI_8254, COMEDI_DAS08, COMEDI_NI_LABPC, or COMEDI_AMPLC_DIO200 options due to changing 'select' directives to 'depends on' directives and there being no other way to select those codependent configuration options. Fixes: b5c75b68b7de ("comedi: add HAS_IOPORT dependencies") Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Arnd Bergmann <arnd@kernel.org> Cc: <stable@vger.kernel.org> # v6.5+ Acked-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20230905090922.3314-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-12NFSD: fix possible oops when nfsd/pool_stats is closed.NeilBrown
If /proc/fs/nfsd/pool_stats is open when the last nfsd thread exits, then when the file is closed a NULL pointer is dereferenced. This is because nfsd_pool_stats_release() assumes that the pointer to the svc_serv cannot become NULL while a reference is held. This used to be the case but a recent patch split nfsd_last_thread() out from nfsd_put(), and clearing the pointer is done in nfsd_last_thread(). This is easily reproduced by running rpc.nfsd 8 ; ( rpc.nfsd 0;true) < /proc/fs/nfsd/pool_stats Fortunately nfsd_pool_stats_release() has easy access to the svc_serv pointer, and so can call svc_put() on it directly. Fixes: 9f28a971ee9f ("nfsd: separate nfsd_last_thread() from nfsd_put()") Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-09-12net: macb: fix sleep inside spinlockSascha Hauer
macb_set_tx_clk() is called under a spinlock but itself calls clk_set_rate() which can sleep. This results in: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 | pps pps1: new PPS source ptp1 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 40, name: kworker/u4:3 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | 4 locks held by kworker/u4:3/40: | #0: ffff000003409148 | macb ff0c0000.ethernet: gem-ptp-timer ptp clock registered. | ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #1: ffff8000833cbdd8 ((work_completion)(&pl->resolve)){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #2: ffff000004f01578 (&pl->state_mutex){+.+.}-{4:4}, at: phylink_resolve+0x44/0x4e8 | #3: ffff000004f06f50 (&bp->lock){....}-{3:3}, at: macb_mac_link_up+0x40/0x2ac | irq event stamp: 113998 | hardirqs last enabled at (113997): [<ffff800080e8503c>] _raw_spin_unlock_irq+0x30/0x64 | hardirqs last disabled at (113998): [<ffff800080e84478>] _raw_spin_lock_irqsave+0xac/0xc8 | softirqs last enabled at (113608): [<ffff800080010630>] __do_softirq+0x430/0x4e4 | softirqs last disabled at (113597): [<ffff80008001614c>] ____do_softirq+0x10/0x1c | CPU: 0 PID: 40 Comm: kworker/u4:3 Not tainted 6.5.0-11717-g9355ce8b2f50-dirty #368 | Hardware name: ... ZynqMP ... (DT) | Workqueue: events_power_efficient phylink_resolve | Call trace: | dump_backtrace+0x98/0xf0 | show_stack+0x18/0x24 | dump_stack_lvl+0x60/0xac | dump_stack+0x18/0x24 | __might_resched+0x144/0x24c | __might_sleep+0x48/0x98 | __mutex_lock+0x58/0x7b0 | mutex_lock_nested+0x24/0x30 | clk_prepare_lock+0x4c/0xa8 | clk_set_rate+0x24/0x8c | macb_mac_link_up+0x25c/0x2ac | phylink_resolve+0x178/0x4e8 | process_one_work+0x1ec/0x51c | worker_thread+0x1ec/0x3e4 | kthread+0x120/0x124 | ret_from_fork+0x10/0x20 The obvious fix is to move the call to macb_set_tx_clk() out of the protected area. This seems safe as rx and tx are both disabled anyway at this point. It is however not entirely clear what the spinlock shall protect. It could be the read-modify-write access to the NCFGR register, but this is accessed in macb_set_rx_mode() and macb_set_rxcsum_feature() as well without holding the spinlock. It could also be the register accesses done in mog_init_rings() or macb_init_buffers(), but again these functions are called without holding the spinlock in macb_hresp_error_task(). The locking seems fishy in this driver and it might deserve another look before this patch is applied. Fixes: 633e98a711ac0 ("net: macb: use resolved link config in mac_link_up()") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20230908112913.1701766-1-s.hauer@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 04:33:20 +0000