summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-09x86/its: Enumerate Indirect Target Selection (ITS) bugPawan Gupta
ITS bug in some pre-Alderlake Intel CPUs may allow indirect branches in the first half of a cache line get predicted to a target of a branch located in the second half of the cache line. Set X86_BUG_ITS on affected CPUs. Mitigation to follow in later commits. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
2025-05-09Documentation: x86/bugs/its: Add ITS documentationPawan Gupta
Add the admin-guide for Indirect Target Selection (ITS). Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
2025-05-09Merge tag 'drm-fixes-2025-05-10' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly drm fixes, bit bigger than last week, but overall amdgpu/xe with some ivpu bits and a random few fixes, and dropping the ttm_backup struct which wrapped struct file and was recently frowned at. drm: - Fix overflow when generating wedged event ttm: - Fix documentation - Remove struct ttm_backup panel: - simple: Fix timings for AUO G101EVN010 amdgpu: - DC FP fixes - Freesync fix - DMUB AUX fixes - VCN fix - Hibernation fixes - HDP fixes xe: - Prevent PF queue overflow - Hold all forcewake during mocs test - Remove GSC flush on reset path - Fix forcewake put on error path - Fix runtime warning when building without svm i915: - Fix oops on resume after disconnecting DP MST sinks during suspend - Fix SPLC num_waiters refcounting ivpu: - Increase timeouts - Fix deadlock in cmdq ioctl - Unlock mutices in correct order v3d: - Avoid memory leak in job handling" * tag 'drm-fixes-2025-05-10' of https://gitlab.freedesktop.org/drm/kernel: (32 commits) drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation drm/xe: Add config control for svm flush work drm/xe: Release force wake first then runtime power drm/xe/gsc: do not flush the GSC worker from the reset path drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs drm/xe: Add page queue multiplier drm/amdgpu/hdp7: use memcfg register to post the write for HDP flush drm/amdgpu/hdp6: use memcfg register to post the write for HDP flush drm/amdgpu/hdp5.2: use memcfg register to post the write for HDP flush drm/amdgpu/hdp5: use memcfg register to post the write for HDP flush drm/amdgpu/hdp4: use memcfg register to post the write for HDP flush drm/amdgpu: fix pm notifier handling Revert "drm/amd: Stop evicting resources on APUs in suspend" drm/amdgpu/vcn: using separate VCN1_AON_SOC offset drm/amd/display: Fix wrong handling for AUX_DEFER case drm/amd/display: Copy AUX read reply data whenever length > 0 drm/amd/display: Remove incorrect checking in dmub aux handler drm/amd/display: Fix the checking condition in dmub aux handling drm/amd/display: Shift DMUB AUX reply command if necessary drm/amd/display: Call FP Protect Before Mode Programming/Mode Support ...
2025-05-10Merge tag 'drm-intel-fixes-2025-05-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes drm/i915 fixes for v6.15-rc6: - Fix oops on resume after disconnecting DP MST sinks during suspend - Fix SPLC num_waiters refcounting Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/87tt5umeaw.fsf@intel.com
2025-05-10Merge tag 'drm-xe-fixes-2025-05-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - Prevent PF queue overflow - Hold all forcewake during mocs test - Remove GSC flush on reset path - Fix forcewake put on error path - Fix runtime warning when building without svm Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/jffqa56f2zp4i5ztz677cdspgxhnw7qfop3dd3l2epykfpfvza@q2nw6wapsphz
2025-05-09Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Move the arm64_use_ng_mappings variable from the .bss to the .data section as it is accessed very early during boot with the MMU off and before the .bss has been initialised. This could lead to incorrect idmap page table" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpufeature: Move arm64_use_ng_mappings to the .data section to prevent wrong idmap generation
2025-05-09Merge tag 'riscv-for-linus-6.15-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - The compressed half-word misaligned access instructions (c.lhu, c.lh, and c.sh) from the Zcb extension are now properly emulated - A series of fixes to properly emulate permissions while handling userspace misaligned accesses - A pair of fixes for PR_GET_TAGGED_ADDR_CTRL to avoid accessing the envcfg CSR on systems that don't support that CSR, and to report those failures up to userspace - The .rela.dyn section is no longer stripped from vmlinux, as it is necessary to relocate the kernel under some conditions (including kexec) * tag 'riscv-for-linus-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Disallow PR_GET_TAGGED_ADDR_CTRL without Supm scripts: Do not strip .rela.dyn section riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL riscv: misaligned: use get_user() instead of __get_user() riscv: misaligned: enable IRQs while handling misaligned accesses riscv: misaligned: factorize trap handling riscv: misaligned: Add handling for ZCB instructions
2025-05-09cgroup/cpuset: Extend kthread_is_per_cpu() check to all PF_NO_SETAFFINITY tasksWaiman Long
Commit ec5fbdfb99d1 ("cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset") enabled us to pull CPUs dedicated to child partitions from tasks in top_cpuset by ignoring per cpu kthreads. However, there can be other kthreads that are not per cpu but have PF_NO_SETAFFINITY flag set to indicate that we shouldn't mess with their CPU affinity. For other kthreads, their affinity will be changed to skip CPUs dedicated to child partitions whether it is an isolating or a scheduling one. As all the per cpu kthreads have PF_NO_SETAFFINITY set, the PF_NO_SETAFFINITY tasks are essentially a superset of per cpu kthreads. Fix this issue by dropping the kthread_is_per_cpu() check and checking the PF_NO_SETAFFINITY flag instead. Fixes: ec5fbdfb99d1 ("cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset") Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2025-05-09Merge tag 'block-6.15-20250509' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - Fix for a regression in this series for loop and read/write iterator handling - zone append block update tweak - remove a broken IO priority test - NVMe pull request via Christoph: - unblock ctrl state transition for firmware update (Daniel Wagner) * tag 'block-6.15-20250509' of git://git.kernel.dk/linux: block: remove test of incorrect io priority level nvme: unblock ctrl state transition for firmware update block: only update request sector if needed loop: Add sanity check for read/write_iter
2025-05-09Merge tag 'io_uring-6.15-20250509' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: - Fix for linked timeouts arming and firing wrt prep and issue of the request being managed by the linked timeout - Fix for a CQE ordering issue between requests with multishot and using the same buffer group. This is a dumbed down version for this release and for stable, it'll get improved for v6.16 - Tweak the SQPOLL submit batch size. A previous commit made SQPOLL manage its own task_work and chose a tiny batch size, bump it from 8 to 32 to fix a performance regression due to that * tag 'io_uring-6.15-20250509' of git://git.kernel.dk/linux: io_uring/sqpoll: Increase task_work submission batch size io_uring: ensure deferred completions are flushed for multishot io_uring: always arm linked timeouts prior to issue
2025-05-09Merge tag 'modules-6.15-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux Pull modules fix from Petr Pavlu: "A single fix to prevent use of an uninitialized completion pointer when releasing a module_kobject in specific situations. This addresses a latent bug exposed by commit f95bbfe18512 ("drivers: base: handle module_kobject creation")" * tag 'modules-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: module: ensure that kobject_put() is safe for module type kobjects
2025-05-09Merge tag 'asahi-soc-fixes-6.15' of https://github.com/AsahiLinux/linux into ↵Arnd Bergmann
arm/fixes Apple SoC fixes for 6.15 This tag contains two small commits since rc1: - Add a .mailmap entry requested by Asahi Lina to better filter her emails - Mark the power domains for the touchbar support introduced with 6.15 as always on since the driver cannot initialize the touchbar from scratch after the domains are powered off (e.g. during suspend). * tag 'asahi-soc-fixes-6.15' of https://github.com/AsahiLinux/linux: arm64: dts: apple: touchbar: Mark ps_dispdfr_be as always-on mailmap: Update email for Asahi Lina Link: https://lore.kernel.org/r/20250423145047.3098-1-sven@svenpeter.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-09Merge tag 'riscv-sophgo-dt-fixes-for-v6.15-rc1' of ↵Arnd Bergmann
https://github.com/sophgo/linux into arm/fixes RISC-V Sophgo Devicetree fixes for v6.15-rc1 Just one minor fix to correct DMA data-width configuration for CV18xx. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-dt-fixes-for-v6.15-rc1' of https://github.com/sophgo/linux: riscv: dts: sophgo: fix DMA data-width configuration for CV18xx Link: https://lore.kernel.org/r/MA0P287MB2262454C19B8899BC1694D04FE832@MA0P287MB2262.INDP287.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-09Merge tag 'amlogic-fixes-for-v6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes Amlogic Fixes for v6.15: - fix reference to unknown/untested PWM clock on ARM/ARM64 boards - fix missing clkc_audio node on dreambox ARM64 DT * tag 'amlogic-fixes-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: amlogic: dreambox: fix missing clkc_audio node arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM clock ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock Link: https://lore.kernel.org/r/e9c520a1-b986-49e1-b9b1-67511c187716@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-09Merge tag 'v6.15-rockchip-dtsfixes1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Removal of operating-points above what the rk3588j soc is rated for, and a number of smaller fixes: Turing RK1 fan can spin down again, fixed pins, pinmuxing and clocks and some devicetree-correctnes improvements. * tag 'v6.15-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: fix Sige5 RTC interrupt pin arm64: dts: rockchip: Assign RT5616 MCLK rate on rk3588-friendlyelec-cm3588 arm64: dts: rockchip: Align wifi node name with bindings in CB2 arm64: dts: rockchip: Fix mmc-pwrseq clock name on rock-pi-4 arm64: dts: rockchip: Use "regulator-fixed" for btreg on px30-engicam for vcc3v3-btreg arm64: dts: rockchip: Add pinmuxing for eMMC on QNAP TS433 arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down Link: https://lore.kernel.org/r/2923598.88bMQJbFj6@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-09x86/mm: Eliminate window where TLB flushes may be inadvertently skippedDave Hansen
tl;dr: There is a window in the mm switching code where the new CR3 is set and the CPU should be getting TLB flushes for the new mm. But should_flush_tlb() has a bug and suppresses the flush. Fix it by widening the window where should_flush_tlb() sends an IPI. Long Version: === History === There were a few things leading up to this. First, updating mm_cpumask() was observed to be too expensive, so it was made lazier. But being lazy caused too many unnecessary IPIs to CPUs due to the now-lazy mm_cpumask(). So code was added to cull mm_cpumask() periodically[2]. But that culling was a bit too aggressive and skipped sending TLB flushes to CPUs that need them. So here we are again. === Problem === The too-aggressive code in should_flush_tlb() strikes in this window: // Turn on IPIs for this CPU/mm combination, but only // if should_flush_tlb() agrees: cpumask_set_cpu(cpu, mm_cpumask(next)); next_tlb_gen = atomic64_read(&next->context.tlb_gen); choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush); load_new_mm_cr3(need_flush); // ^ After 'need_flush' is set to false, IPIs *MUST* // be sent to this CPU and not be ignored. this_cpu_write(cpu_tlbstate.loaded_mm, next); // ^ Not until this point does should_flush_tlb() // become true! should_flush_tlb() will suppress TLB flushes between load_new_mm_cr3() and writing to 'loaded_mm', which is a window where they should not be suppressed. Whoops. === Solution === Thankfully, the fuzzy "just about to write CR3" window is already marked with loaded_mm==LOADED_MM_SWITCHING. Simply checking for that state in should_flush_tlb() is sufficient to ensure that the CPU is targeted with an IPI. This will cause more TLB flush IPIs. But the window is relatively small and I do not expect this to cause any kind of measurable performance impact. Update the comment where LOADED_MM_SWITCHING is written since it grew yet another user. Peter Z also raised a concern that should_flush_tlb() might not observe 'loaded_mm' and 'is_lazy' in the same order that switch_mm_irqs_off() writes them. Add a barrier to ensure that they are observed in the order they are written. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rik van Riel <riel@surriel.com> Link: https://lore.kernel.org/oe-lkp/202411282207.6bd28eae-lkp@intel.com/ [1] Fixes: 6db2526c1d69 ("x86/mm/tlb: Only trim the mm_cpumask once a second") [2] Reported-by: Stephen Dolan <sdolan@janestreet.com> Cc: stable@vger.kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-05-09arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeoutHimanshu Bhavani
Fix SD card timeout issue caused by LDO5 regulator getting disabled after boot. The kernel log shows LDO5 being disabled, which leads to a timeout on USDHC2: [ 33.760561] LDO5: disabling [ 81.119861] mmc1: Timeout waiting for hardware interrupt. To prevent this, set regulator-boot-on and regulator-always-on for LDO5. Also add the vqmmc regulator to properly support 1.8V/3.3V signaling for USDHC2 using a GPIO-controlled regulator. Fixes: 6c2a1f4f71258 ("arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and VAR-SOM-MX8MP SoM") Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io> Acked-by: Tarang Raval <tarang.raval@siliconsignals.io> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-05-09io_uring/sqpoll: Increase task_work submission batch sizeGabriel Krisman Bertazi
Our QA team reported a 10%-23%, throughput reduction on an io_uring sqpoll testcase doing IO to a null_blk, that I traced back to a reduction of the device submission queue depth utilization. It turns out that, after commit af5d68f8892f ("io_uring/sqpoll: manage task_work privately"), we capped the number of task_work entries that can be completed from a single spin of sqpoll to only 8 entries, before the sqpoll goes around to (potentially) sleep. While this cap doesn't drive the submission side directly, it impacts the completion behavior, which affects the number of IO queued by fio per sqpoll cycle on the submission side, and io_uring ends up seeing less ios per sqpoll cycle. As a result, block layer plugging is less effective, and we see more time spent inside the block layer in profilings charts, and increased submission latency measured by fio. There are other places that have increased overhead once sqpoll sleeps more often, such as the sqpoll utilization calculation. But, in this microbenchmark, those were not representative enough in perf charts, and their removal didn't yield measurable changes in throughput. The major overhead comes from the fact we plug less, and less often, when submitting to the block layer. My benchmark is: fio --ioengine=io_uring --direct=1 --iodepth=128 --runtime=300 --bs=4k \ --invalidate=1 --time_based --ramp_time=10 --group_reporting=1 \ --filename=/dev/nullb0 --name=RandomReads-direct-nullb-sqpoll-4k-1 \ --rw=randread --numjobs=1 --sqthread_poll In one machine, tested on top of Linux 6.15-rc1, we have the following baseline: READ: bw=4994MiB/s (5236MB/s), 4994MiB/s-4994MiB/s (5236MB/s-5236MB/s), io=439GiB (471GB), run=90001-90001msec With this patch: READ: bw=5762MiB/s (6042MB/s), 5762MiB/s-5762MiB/s (6042MB/s-6042MB/s), io=506GiB (544GB), run=90001-90001msec which is a 15% improvement in measured bandwidth. The average submission latency is noticeably lowered too. As measured by fio: Baseline: lat (usec): min=20, max=241, avg=99.81, stdev=3.38 Patched: lat (usec): min=26, max=226, avg=86.48, stdev=4.82 If we look at blktrace, we can also see the plugging behavior is improved. In the baseline, we end up limited to plugging 8 requests in the block layer regardless of the device queue depth size, while after patching we can drive more io, and we manage to utilize the full device queue. In the baseline, after a stabilization phase, an ordinary submission looks like: 254,0 1 49942 0.016028795 5977 U N [iou-sqp-5976] 7 After patching, I see consistently more requests per unplug. 254,0 1 4996 0.001432872 3145 U N [iou-sqp-3144] 32 Ideally, the cap size would at least be the deep enough to fill the device queue, but we can't predict that behavior, or assume all IO goes to a single device, and thus can't guess the ideal batch size. We also don't want to let the tw run unbounded, though I'm not sure it would really be a problem. Instead, let's just give it a more sensible value that will allow for more efficient batching. I've tested with different cap values, and initially proposed to increase the cap to 1024. Jens argued it is too big of a bump and I observed that, with 32, I'm no longer able to observe this bottleneck in any of my machines. Fixes: af5d68f8892f ("io_uring/sqpoll: manage task_work privately") Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/20250508181203.3785544-1-krisman@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-09Merge branch 'net_sched-gso_skb-flushing'David S. Miller
Cong Wang says: ==================== net_sched: Fix gso_skb flushing during qdisc change This patchset contains a bug fix and its test cases, please check each patch description for more details. To keep the bug fix minimum, I intentionally limit the code changes to the cases reported here. --- v2: added a missing qlen-- fixed the new boolean parameter for two qdiscs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2025-05-09selftests/tc-testing: Add qdisc limit trimming testsCong Wang
Added new test cases for FQ, FQ_CODEL, FQ_PIE, and HHF qdiscs to verify queue trimming behavior when the qdisc limit is dynamically reduced. Each test injects packets, reduces the qdisc limit, and checks that the new limit is enforced. This is still best effort since timing qdisc backlog is not easy. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-05-09net_sched: Flush gso_skb list too during ->change()Cong Wang
Previously, when reducing a qdisc's limit via the ->change() operation, only the main skb queue was trimmed, potentially leaving packets in the gso_skb list. This could result in NULL pointer dereference when we only check sch->limit against sch->q.qlen. This patch introduces a new helper, qdisc_dequeue_internal(), which ensures both the gso_skb list and the main queue are properly flushed when trimming excess packets. All relevant qdiscs (codel, fq, fq_codel, fq_pie, hhf, pie) are updated to use this helper in their ->change() routines. Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM") Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM") Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler") Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler") Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme") Reported-by: Will <willsroot@protonmail.com> Reported-by: Savy <savy@syst3mfailure.io> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-05-09fs: Remove redundant errseq_set call in mark_buffer_write_io_error.Jeremy Bongio
mark_buffer_write_io_error sets sb->s_wb_err to -EIO twice. Once in mapping_set_error and once in errseq_set. Only mapping_set_error checks if bh->b_assoc_map->host is NULL. Discovered during null pointer dereference during writeback to a failing device: [<ffffffff9a416dc8>] ? mark_buffer_write_io_error+0x98/0xc0 [<ffffffff9a416dbe>] ? mark_buffer_write_io_error+0x8e/0xc0 [<ffffffff9ad4bda0>] end_buffer_async_write+0x90/0xd0 [<ffffffff9ad4e3eb>] end_bio_bh_io_sync+0x2b/0x40 [<ffffffff9adbafe6>] blk_update_request+0x1b6/0x480 [<ffffffff9adbb3d8>] blk_mq_end_request+0x18/0x30 [<ffffffff9adbc6aa>] blk_mq_dispatch_rq_list+0x4da/0x8e0 [<ffffffff9adc0a68>] __blk_mq_sched_dispatch_requests+0x218/0x6a0 [<ffffffff9adc07fa>] blk_mq_sched_dispatch_requests+0x3a/0x80 [<ffffffff9adbbb98>] blk_mq_run_hw_queue+0x108/0x330 [<ffffffff9adbcf58>] blk_mq_flush_plug_list+0x178/0x5f0 [<ffffffff9adb6741>] __blk_flush_plug+0x41/0x120 [<ffffffff9adb6852>] blk_finish_plug+0x22/0x40 [<ffffffff9ad47cb0>] wb_writeback+0x150/0x280 [<ffffffff9ac5343f>] ? set_worker_desc+0x9f/0xc0 [<ffffffff9ad4676e>] wb_workfn+0x24e/0x4a0 Fixes: 485e9605c0573 ("fs/buffer.c: record blockdev write errors in super_block that it backs") Signed-off-by: Jeremy Bongio <jbongio@google.com> Link: https://lore.kernel.org/20250507123010.1228243-1-jbongio@google.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-09arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive modeAhmad Fatoum
When running in nominal drive mode, the maximum allowed frequency for the NoC is 800MHz, but the OPP table for the i.MX8MP interconnect device listed the 1GHz operating point for the NoC, regardless of the active mode. The newly introduced imx8mp-nominal.dtsi header reconfigures the clock controller to observe nominal drive mode limits, so have it modify the maximum NoC OPP as well. Fixes: 255fbd9eabe7 ("arm64: dts: imx8mp: Add optional nominal drive mode DTSI") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-05-09drm/i915/dp: Fix determining SST/MST mode during MTP TU state computationImre Deak
Determining the SST/MST mode during state computation must be done based on the output type stored in the CRTC state, which in turn is set once based on the modeset connector's SST vs. MST type and will not change as long as the connector is using the CRTC. OTOH the MST mode indicated by the given connector's intel_dp::is_mst flag can change independently of the above output type, based on what sink is at any moment plugged to the connector. Fix the state computation accordingly. Cc: Jani Nikula <jani.nikula@intel.com> Fixes: f6971d7427c2 ("drm/i915/mst: adapt intel_dp_mtp_tu_compute_config() for 128b/132b SST") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4607 Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250507151953.251846-1-imre.deak@intel.com (cherry picked from commit 0f45696ddb2b901fbf15cb8d2e89767be481d59f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-05-09memblock: Accept allocated memory before use in memblock_double_array()Tom Lendacky
When increasing the array size in memblock_double_array() and the slab is not yet available, a call to memblock_find_in_range() is used to reserve/allocate memory. However, the range returned may not have been accepted, which can result in a crash when booting an SNP guest: RIP: 0010:memcpy_orig+0x68/0x130 Code: ... RSP: 0000:ffffffff9cc03ce8 EFLAGS: 00010006 RAX: ff11001ff83e5000 RBX: 0000000000000000 RCX: fffffffffffff000 RDX: 0000000000000bc0 RSI: ffffffff9dba8860 RDI: ff11001ff83e5c00 RBP: 0000000000002000 R08: 0000000000000000 R09: 0000000000002000 R10: 000000207fffe000 R11: 0000040000000000 R12: ffffffff9d06ef78 R13: ff11001ff83e5000 R14: ffffffff9dba7c60 R15: 0000000000000c00 memblock_double_array+0xff/0x310 memblock_add_range+0x1fb/0x2f0 memblock_reserve+0x4f/0xa0 memblock_alloc_range_nid+0xac/0x130 memblock_alloc_internal+0x53/0xc0 memblock_alloc_try_nid+0x3d/0xa0 swiotlb_init_remap+0x149/0x2f0 mem_init+0xb/0xb0 mm_core_init+0x8f/0x350 start_kernel+0x17e/0x5d0 x86_64_start_reservations+0x14/0x30 x86_64_start_kernel+0x92/0xa0 secondary_startup_64_no_verify+0x194/0x19b Mitigate this by calling accept_memory() on the memory range returned before the slab is available. Prior to v6.12, the accept_memory() interface used a 'start' and 'end' parameter instead of 'start' and 'size', therefore the accept_memory() call must be adjusted to specify 'start + size' for 'end' when applying to kernels prior to v6.12. Cc: stable@vger.kernel.org # see patch description, needs adjustments for <= 6.11 Fixes: dcdfdd40fa82 ("mm: Add support for unaccepted memory") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/da1ac73bf4ded761e21b4e4bb5178382a580cd73.1746725050.git.thomas.lendacky@amd.com Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
2025-05-08net: qede: Initialize qede_ll_ops with designated initializerNathan Chancellor
After a recent change [1] in clang's randstruct implementation to randomize structures that only contain function pointers, there is an error because qede_ll_ops get randomized but does not use a designated initializer for the first member: drivers/net/ethernet/qlogic/qede/qede_main.c:206:2: error: a randomized struct can only be initialized with a designated initializer 206 | { | ^ Explicitly initialize the common member using a designated initializer to fix the build. Cc: stable@vger.kernel.org Fixes: 035f7f87b729 ("randstruct: Enable Clang support") Link: https://github.com/llvm/llvm-project/commit/04364fb888eea6db9811510607bed4b200bcb082 [1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://patch.msgid.link/20250507-qede-fix-clang-randstruct-v1-1-5ccc15626fba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-08Merge tag 'for-net-2025-05-08' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags - hci_event: Fix not using key encryption size when its known * tag 'for-net-2025-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_event: Fix not using key encryption size when its known Bluetooth: MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags ==================== Link: https://patch.msgid.link/20250508150927.385675-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-09Merge tag 'amd-drm-fixes-6.15-2025-05-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.15-2025-05-08: amdgpu: - DC FP fixes - Freesync fix - DMUB AUX fixes - VCN fix - Hibernation fixes - HDP fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250508194102.3242372-1-alexander.deucher@amd.com
2025-05-09Merge tag 'drm-misc-fixes-2025-05-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: drm: - Fix overflow when generating wedged event ivpu: - Increate timeouts - Fix deadlock in cmdq ioctl - Unlock mutices in correct order panel: - simple: Fix timings for AUO G101EVN010 ttm: - Fix documentation - Remove struct ttm_backup v3d: - Avoid memory leak in job handling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250508104939.GA76697@2a02-2454-fd5e-fd00-c110-cbf2-6528-c5be.dyn6.pyur.net
2025-05-08Merge tag 'bcachefs-2025-05-08' of git://evilpiepirate.org/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: - Some fixes to help with filesystem analysis: ensure superblock error count gets written if we go ERO, don't discard the journal aggressively (so it's available for list_journal -a) - Fix lost wakeup on arm causing us to get stuck when reading btree nodes - Fix fsck failing to exit on ctrl-c - An additional fix for filesystems with misaligned bucket sizes: we now ensure that allocations are properly aligned - Setting background target but not promote target will now leave that data cached on the foreground target, as it used to - Revert a change to when we allocate the VFS superblock, this was done for implementing blk_holder_ops but ended up not being needed, and allocating a superblock and not setting SB_BORN while we do recovery caused sync() calls and other things to hang - Assorted fixes for harmless error messages that caused concern to users * tag 'bcachefs-2025-05-08' of git://evilpiepirate.org/bcachefs: bcachefs: Don't aggressively discard the journal bcachefs: Ensure superblock gets written when we go ERO bcachefs: Filter out harmless EROFS error messages bcachefs: journal_shutdown is EROFS, not EIO bcachefs: Call bch2_fs_start before getting vfs superblock bcachefs: fix hung task timeout in journal read bcachefs: Add missing barriers before wake_up_bit() bcachefs: Ensure proper write alignment bcachefs: Improve want_cached_ptr() bcachefs: thread_with_stdio: fix spinning instead of exiting
2025-05-08drm/xe: Add config control for svm flush workShuicheng Lin
Without CONFIG_DRM_XE_GPUSVM set, GPU SVM is not initialized thus below warning pops. Refine the flush work code to be controlled by the config to avoid below warning: " [ 453.132028] ------------[ cut here ]------------ [ 453.132527] WARNING: CPU: 9 PID: 4491 at kernel/workqueue.c:4205 __flush_work+0x379/0x3a0 [ 453.133355] Modules linked in: xe drm_ttm_helper ttm gpu_sched drm_buddy drm_suballoc_helper drm_gpuvm drm_exec [ 453.134352] CPU: 9 UID: 0 PID: 4491 Comm: xe_exec_mix_mod Tainted: G U W 6.15.0-rc3+ #7 PREEMPT(full) [ 453.135405] Tainted: [U]=USER, [W]=WARN ... [ 453.136921] RIP: 0010:__flush_work+0x379/0x3a0 [ 453.137417] Code: 8b 45 00 48 8b 55 08 89 c7 48 c1 e8 04 83 e7 08 83 e0 0f 83 cf 02 89 c6 48 0f ba 6d 00 03 e9 d5 fe ff ff 0f 0b e9 db fd ff ff <0f> 0b 45 31 e4 e9 d1 fd ff ff 0f 0b e9 03 ff ff ff 0f 0b e9 d6 fe [ 453.139250] RSP: 0018:ffffc90000c67b18 EFLAGS: 00010246 [ 453.139782] RAX: 0000000000000000 RBX: ffff888108a24000 RCX: 0000000000002000 [ 453.140521] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8881016d61c8 [ 453.141253] RBP: ffff8881016d61c8 R08: 0000000000000000 R09: 0000000000000000 [ 453.141985] R10: 0000000000000000 R11: 0000000008a24000 R12: 0000000000000001 [ 453.142709] R13: 0000000000000002 R14: 0000000000000000 R15: ffff888107db8c00 [ 453.143450] FS: 00007f44853d4c80(0000) GS:ffff8882f469b000(0000) knlGS:0000000000000000 [ 453.144276] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 453.144853] CR2: 00007f4487629228 CR3: 00000001016aa000 CR4: 00000000000406f0 [ 453.145594] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 453.146320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 453.147061] Call Trace: [ 453.147336] <TASK> [ 453.147579] ? tick_nohz_tick_stopped+0xd/0x30 [ 453.148067] ? xas_load+0x9/0xb0 [ 453.148435] ? xa_load+0x6f/0xb0 [ 453.148781] __xe_vm_bind_ioctl+0xbd5/0x1500 [xe] [ 453.149338] ? dev_printk_emit+0x48/0x70 [ 453.149762] ? _dev_printk+0x57/0x80 [ 453.150148] ? drm_ioctl+0x17c/0x440 [ 453.150544] ? __drm_dev_vprintk+0x36/0x90 [ 453.150983] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe] [ 453.151575] ? drm_ioctl_kernel+0x9f/0xf0 [ 453.151998] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe] [ 453.152560] drm_ioctl_kernel+0x9f/0xf0 [ 453.152968] drm_ioctl+0x20f/0x440 [ 453.153332] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe] [ 453.153893] ? ioctl_has_perm.constprop.0.isra.0+0xae/0x100 [ 453.154489] ? memory_bm_test_bit+0x5/0x60 [ 453.154935] xe_drm_ioctl+0x47/0x70 [xe] [ 453.155419] __x64_sys_ioctl+0x8d/0xc0 [ 453.155824] do_syscall_64+0x47/0x110 [ 453.156228] entry_SYSCALL_64_after_hwframe+0x76/0x7e " v2 (Matt): refine commit message to have more details add Fixes tag move the code to xe_svm.h which already have the config remove a blank line per codestyle suggestion Fixes: 63f6e480d115 ("drm/xe: Add SVM garbage collector") Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250502170052.1787973-1-shuicheng.lin@intel.com (cherry picked from commit 9d80698bcd97a5ad1088bcbb055e73fd068895e2) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-05-08drm/xe: Release force wake first then runtime powerShuicheng Lin
xe_force_wake_get() is dependent on xe_pm_runtime_get(), so for the release path, xe_force_wake_put() should be called first then xe_pm_runtime_put(). Combine the error path and normal path together with goto. Fixes: 85d547608ef5 ("drm/xe/xe_gt_debugfs: Update handling of xe_force_wake_get return") Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://lore.kernel.org/r/20250507022302.2187527-1-shuicheng.lin@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 432cd94efdca06296cc5e76d673546f58aa90ee1) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-05-08drm/xe/gsc: do not flush the GSC worker from the reset pathDaniele Ceraolo Spurio
The workqueue used for the reset worker is marked as WQ_MEM_RECLAIM, while the GSC one isn't (and can't be as we need to do memory allocations in the gsc worker). Therefore, we can't flush the latter from the former. The reason why we had such a flush was to avoid interrupting either the GSC FW load or in progress GSC proxy operations. GSC proxy operations fall into 2 categories: 1) GSC proxy init: this only happens once immediately after GSC FW load and does not support being interrupted. The only way to recover from an interruption of the proxy init is to do an FLR and re-load the GSC. 2) GSC proxy request: this can happen in response to a request that the driver sends to the GSC. If this is interrupted, the GSC FW will timeout and the driver request will be failed, but overall the GSC will keep working fine. Flushing the work allowed us to avoid interruption in both cases (unless the hang came from the GSC engine itself, in which case we're toast anyway). However, a failure on a proxy request is tolerable if we're in a scenario where we're triggering a GT reset (i.e., something is already gone pretty wrong), so what we really need to avoid is interrupting the init flow, which we can do by polling on the register that reports when the proxy init is complete (as that ensure us that all the load and init operations have been completed). Note that during suspend we still want to do a flush of the worker to make sure it completes any operations involving the HW before the power is cut. v2: fix spelling in commit msg, rename waiter function (Julia) Fixes: dd0e89e5edc2 ("drm/xe/gsc: GSC FW load") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4830 Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com> Link: https://lore.kernel.org/r/20250502155104.2201469-1-daniele.ceraolospurio@intel.com (cherry picked from commit 12370bfcc4f0bdf70279ec5b570eb298963422b5) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-05-08drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regsTejas Upadhyay
LNCF registers report wrong values when XE_FORCEWAKE_GT only is held. Holding XE_FORCEWAKE_ALL ensures correct operations on LNCF regs. V2(Himal): - Use xe_force_wake_ref_has_domain Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1999 Fixes: a6a4ea6d7d37 ("drm/xe: Add mocs kunit") Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250428082357.1730068-1-tejas.upadhyay@intel.com Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> (cherry picked from commit 70a2585e582058e94fe4381a337be42dec800337) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-05-08drm/xe: Add page queue multiplierMatthew Brost
For an unknown reason the math to determine the PF queue size does is not correct - compute UMD applications are overflowing the PF queue which is fatal. A multippier of 8 fixes the problem. Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size") Cc: stable@vger.kernel.org Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com> Link: https://lore.kernel.org/r/20250408155915.78770-1-matthew.brost@intel.com (cherry picked from commit 29582e0ea75c95668d168b12406e3c56cf5a73c4) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-05-08Merge tag 'vfio-v6.15-rc6' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson: - Fix an issue in vfio-pci huge_fault handling by aligning faults to the order, resulting in deterministic use of huge pages. This avoids a race where simultaneous aligned and unaligned faults to the same PMD can result in a VM_FAULT_OOM and subsequent VM crash. (Alex Williamson) * tag 'vfio-v6.15-rc6' of https://github.com/awilliam/linux-vfio: vfio/pci: Align huge faults to order
2025-05-08Merge tag 'riscv-fixes-6.15-rc6' of ↵Palmer Dabbelt
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into fixes riscv fixes for 6.15-rc6 - A fix to handle compressed halfword load/store instructions misaligned accesses - A fix to allow user memory access while handling a misaligned access - 2 fixes to return an error if the pointer masking extension is not implemented on the platform but userspace still tries to access it, which caused oops on some early platforms - A fix to prevent the stripping of .rela.dyn so that a vmlinux loaded by kexec can successfully boot * tag 'riscv-fixes-6.15-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux: riscv: Disallow PR_GET_TAGGED_ADDR_CTRL without Supm scripts: Do not strip .rela.dyn section riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL riscv: misaligned: use get_user() instead of __get_user() riscv: misaligned: enable IRQs while handling misaligned accesses riscv: misaligned: factorize trap handling riscv: misaligned: Add handling for ZCB instructions
2025-05-08drm/amdgpu/hdp7: use memcfg register to post the write for HDP flushAlex Deucher
Reading back the remapped HDP flush register seems to cause problems on some platforms. All we need is a read, so read back the memcfg register. Fixes: 689275140cb8 ("drm/amdgpu/hdp7.0: do a posting read when flushing HDP") Reported-by: Alexey Klimov <alexey.klimov@linaro.org> Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908 Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit dbc064adfcf9095e7d895bea87b2f75c1ab23236) Cc: stable@vger.kernel.org
2025-05-08drm/amdgpu/hdp6: use memcfg register to post the write for HDP flushAlex Deucher
Reading back the remapped HDP flush register seems to cause problems on some platforms. All we need is a read, so read back the memcfg register. Fixes: abe1cbaec6cf ("drm/amdgpu/hdp6.0: do a posting read when flushing HDP") Reported-by: Alexey Klimov <alexey.klimov@linaro.org> Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908 Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 84141ff615951359c9a99696fd79a36c465ed847) Cc: stable@vger.kernel.org
2025-05-08drm/amdgpu/hdp5.2: use memcfg register to post the write for HDP flushAlex Deucher
Reading back the remapped HDP flush register seems to cause problems on some platforms. All we need is a read, so read back the memcfg register. Fixes: f756dbac1ce1 ("drm/amdgpu/hdp5.2: do a posting read when flushing HDP") Reported-by: Alexey Klimov <alexey.klimov@linaro.org> Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908 Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4a89b7698e771914b4d5b571600c76e2fdcbe2a9) Cc: stable@vger.kernel.org
2025-05-08drm/amdgpu/hdp5: use memcfg register to post the write for HDP flushAlex Deucher
Reading back the remapped HDP flush register seems to cause problems on some platforms. All we need is a read, so read back the memcfg register. Fixes: cf424020e040 ("drm/amdgpu/hdp5.0: do a posting read when flushing HDP") Reported-by: Alexey Klimov <alexey.klimov@linaro.org> Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908 Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a5cb344033c7598762e89255e8ff52827abb57a4) Cc: stable@vger.kernel.org
2025-05-08Merge tag 'net-6.15-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from CAN, WiFi and netfilter. We have still a comple of regressions open due to the recent drivers locking refactor. The patches are in-flight, but not ready yet. Current release - regressions: - core: lock netdevices during dev_shutdown - sch_htb: make htb_deactivate() idempotent - eth: virtio-net: don't re-enable refill work too early Current release - new code bugs: - eth: icssg-prueth: fix kernel panic during concurrent Tx queue access Previous releases - regressions: - gre: fix again IPv6 link-local address generation. - eth: b53: fix learning on VLAN unaware bridges Previous releases - always broken: - wifi: fix out-of-bounds access during multi-link element defragmentation - can: - initialize spin lock on device probe - fix order of unregistration calls - openvswitch: fix unsafe attribute parsing in output_userspace() - eth: - virtio-net: fix total qstat values - mtk_eth_soc: reset all TX queues on DMA free - fbnic: firmware IPC mailbox fixes" * tag 'net-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits) virtio-net: fix total qstat values net: export a helper for adding up queue stats fbnic: Do not allow mailbox to toggle to ready outside fbnic_mbx_poll_tx_ready fbnic: Pull fbnic_fw_xmit_cap_msg use out of interrupt context fbnic: Improve responsiveness of fbnic_mbx_poll_tx_ready fbnic: Cleanup handling of completions fbnic: Actually flush_tx instead of stalling out fbnic: Add additional handling of IRQs fbnic: Gate AXI read/write enabling on FW mailbox fbnic: Fix initialization of mailbox descriptor rings net: dsa: b53: do not set learning and unicast/multicast on up net: dsa: b53: fix learning on VLAN unaware bridges net: dsa: b53: fix toggling vlan_filtering net: dsa: b53: do not program vlans when vlan filtering is off net: dsa: b53: do not allow to configure VLAN 0 net: dsa: b53: always rejoin default untagged VLAN on bridge leave net: dsa: b53: fix VLAN ID for untagged vlan on bridge leave net: dsa: b53: fix flushing old pvid VLAN on pvid change net: dsa: b53: fix clearing PVID of a port net: dsa: b53: keep CPU port always tagged again ...
2025-05-08Merge tag 's390-6.15-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Fix potential use-after-free bug and missing error handling in PCI code - Fix dcssblk build error - Fix last breaking event handling in case of stack corruption to allow for better error reporting - Update defconfigs * tag 's390-6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: Fix duplicate pci_dev_put() in disable_slot() when PF has child VFs s390/pci: Fix missing check for zpci_create_device() error return s390: Update defconfigs s390/dcssblk: Fix build error with CONFIG_DAX=m and CONFIG_DCSSBLK=y s390/entry: Fix last breaking event handling in case of stack corruption s390/configs: Enable options required for TC flow offload s390/configs: Enable VDPA on Nvidia ConnectX-6 network card
2025-05-08Merge tag 'v6.15-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: - Fix UAF closing file table (e.g. in tree disconnect) - Fix potential out of bounds write - Fix potential memory leak parsing lease state in open - Fix oops in rename with empty target * tag 'v6.15-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: Fix UAF in __close_file_table_ids ksmbd: prevent out-of-bounds stream writes by validating *pos ksmbd: fix memory leak in parse_lease_state() ksmbd: prevent rename with empty string
2025-05-08Merge tag 'nvme-6.15-2025-05-08' of git://git.infradead.org/nvme into block-6.15Jens Axboe
Pull NVMe fix from Christoph: "nvme fixes for linux 6.15 - unblock ctrl state transition for firmware update (Daniel Wagner)" * tag 'nvme-6.15-2025-05-08' of git://git.infradead.org/nvme: nvme: unblock ctrl state transition for firmware update
2025-05-08block: remove test of incorrect io priority levelAaron Lu
Ever since commit eca2040972b4("scsi: block: ioprio: Clean up interface definition"), the macro IOPRIO_PRIO_LEVEL() will mask the level value to something between 0 and 7 so necessarily, level will always be lower than IOPRIO_NR_LEVELS(8). Remove this obsolete check. Reported-by: Kexin Wei <ys.weikexin@h3c.com> Cc: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Aaron Lu <ziqianlu@bytedance.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250508083018.GA769554@bytedance Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-08arm64: proton-pack: Add new CPUs 'k' values for branch mitigationJames Morse
Update the list of 'k' values for the branch mitigation from arm's website. Add the values for Cortex-X1C. The MIDR_EL1 value can be found here: https://developer.arm.com/documentation/101968/0002/Register-descriptions/AArch> Link: https://developer.arm.com/documentation/110280/2-0/?lang=en Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2025-05-08arm64: bpf: Only mitigate cBPF programs loaded by unprivileged usersJames Morse
Support for eBPF programs loaded by unprivileged users is typically disabled. This means only cBPF programs need to be mitigated for BHB. In addition, only mitigate cBPF programs that were loaded by an unprivileged user. Privileged users can also load the same program via eBPF, making the mitigation pointless. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2025-05-08arm64: bpf: Add BHB mitigation to the epilogue for cBPF programsJames Morse
A malicious BPF program may manipulate the branch history to influence what the hardware speculates will happen next. On exit from a BPF program, emit the BHB mititgation sequence. This is only applied for 'classic' cBPF programs that are loaded by seccomp. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2025-05-08arm64: proton-pack: Expose whether the branchy loop k valueJames Morse
Add a helper to expose the k value of the branchy loop. This is needed by the BPF JIT to generate the mitigation sequence in BPF programs. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 04:38:33 +0000