summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-29net: hns3: fix incorrect type in assignment.Guojia Liao
This patch fixes some incorrect type in assignment reported by sparse. Those sparse warning as below: - warning : restricted __le16 degrades to integer - warning : cast from restricted __le32 - warning : expected restricted __le32 - warning : cast from restricted __be32 - warning : cast from restricted __be16 - warning : cast to restricted __le16 Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: make some reusable codes into a functionYonglong Liu
In hclge_dcb.c, these pair of codes: hclge_notify_client(hdev, HNAE3_DOWN_CLIENT); hclge_notify_client(hdev, HNAE3_UNINIT_CLIENT); and hclge_notify_client(hdev, HNAE3_INIT_CLIENT); hclge_notify_client(hdev, HNAE3_UP_CLIENT); are called many times, so make them into a function. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: optimize some log printingsYufeng Mo
To better identify abnormal conditions, this patch modifies or adds some logs to show driver status more accurately. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: reduce the parameters of some functionsGuojia Liao
This patch simplifies parameters of some functions by deleting unused parameter. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: modify base parameter of kstrtouint in hclge_dbg_dump_tm_mapHuazhong Tan
This patch replaces kstrtouint()'s patameter base with 0 in the hclge_dbg_dump_tm_mac(), which makes it more flexible. Also uses a macro to replace string "dump tm map", since it has been used multiple times. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: use macro instead of magic numberHuazhong Tan
This patch uses macro to replace some magic number. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: code optimization for debugfs related to "dump reg"Zhongzhu Liu
For making the code more readable, this patch uses a array to keep the information about the dumping register, and then uses it to parse the parameter cmd_buf which passing into hclge_dbg_dump_reg_cmd(). Also replaces parameter "base" of kstrtouint with 0 in the hclge_dbg_dump_reg_common(), which makes it more flexible. Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29dpaa2-eth: Add pause frame supportIoana Radulescu
Starting with firmware version MC10.18.0, we have support for L2 flow control. Asymmetrical configuration (Rx or Tx only) is supported, but not pause frame autonegotioation. Pause frame configuration is done via ethtool. By default, we start with flow control enabled on both Rx and Tx. Changes are propagated to hardware through firmware commands, using two flags (PAUSE, ASYM_PAUSE) to specify Rx and Tx pause configuration, as follows: PAUSE | ASYM_PAUSE | Rx pause | Tx pause ---------------------------------------- 0 | 0 | disabled | disabled 0 | 1 | disabled | enabled 1 | 0 | enabled | enabled 1 | 1 | enabled | disabled The hardware can automatically send pause frames when the number of buffers in the pool goes below a predefined threshold. Due to this, flow control is incompatible with Rx frame queue taildrop (both mechanisms target the case when processing of ingress frames can't keep up with the Rx rate; for large frames, the number of buffers in the pool may never get low enough to trigger pause frames as long as taildrop is enabled). So we set pause frame generation and Rx FQ taildrop as mutually exclusive. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29dpaa2-eth: Use stored link settingsIoana Radulescu
Whenever a link state change occurs, we get notified and save the new link settings in the device's private data. In ethtool get_link_ksettings, use the stored state instead of interrogating the firmware each time. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29dpaa2-eth: Remove support for changing link settingsIoana Radulescu
We only support fixed-link for now, so there is no point in offering users the option to change link settings via ethtool. Functionally there is no change, since firmware prevents us from changing link parameters anyway. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29Merge tag 'mac80211-for-davem-2019-08-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have * one fix for a driver as I'm covering for Kalle while he's on vacation * two fixes for eapol-over-nl80211 work ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29i2c: piix4: Fix port selection for AMD Family 16h Model 30hAndrew Cooks
Family 16h Model 30h SMBus controller needs the same port selection fix as described and fixed in commit 0fe16195f891 ("i2c: piix4: Fix SMBus port selection for AMD Family 17h chips") commit 6befa3fde65f ("i2c: piix4: Support alternative port selection register") also fixed the port selection for Hudson2, but unfortunately this is not the exact same device and the AMD naming and PCI Device IDs aren't particularly helpful here. The SMBus port selection register is common to the following Families and models, as documented in AMD's publicly available BIOS and Kernel Developer Guides: 50742 - Family 15h Model 60h-6Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 55072 - Family 15h Model 70h-7Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 52740 - Family 16h Model 30h-3Fh (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) The Hudson2 PCI Device ID (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) is shared between Bolton FCH and Family 16h Model 30h, but the location of the SmBus0Sel port selection bits are different: 51192 - Bolton Register Reference Guide We distinguish between Bolton and Family 16h Model 30h using the PCI Revision ID: Bolton is device 0x780b, revision 0x15 Family 16h Model 30h is device 0x780b, revision 0x1F Family 15h Model 60h and 70h are both device 0x790b, revision 0x4A. The following additional public AMD BKDG documents were checked and do not share the same port selection register: 42301 - Family 15h Model 00h-0Fh doesn't mention any 42300 - Family 15h Model 10h-1Fh doesn't mention any 49125 - Family 15h Model 30h-3Fh doesn't mention any 48751 - Family 16h Model 00h-0Fh uses the previously supported index register SB800_PIIX4_PORT_IDX_ALT at 0x2e Signed-off-by: Andrew Cooks <andrew.cooks@opengear.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org [v4.6+] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-29x86/mm/cpa: Prevent large page split when ftrace flips RW on kernel textThomas Gleixner
ftrace does not use text_poke() for enabling trace functionality. It uses its own mechanism and flips the whole kernel text to RW and back to RO. The CPA rework removed a loop based check of 4k pages which tried to preserve a large page by checking each 4k page whether the change would actually cover all pages in the large page. This resulted in endless loops for nothing as in testing it turned out that it actually never preserved anything. Of course testing missed to include ftrace, which is the one and only case which benefitted from the 4k loop. As a consequence enabling function tracing or ftrace based kprobes results in a full 4k split of the kernel text, which affects iTLB performance. The kernel RO protection is the only valid case where this can actually preserve large pages. All other static protections (RO data, data NX, PCI, BIOS) are truly static. So a conflict with those protections which results in a split should only ever happen when a change of memory next to a protected region is attempted. But these conflicts are rightfully splitting the large page to preserve the protected regions. In fact a change to the protected regions itself is a bug and is warned about. Add an exception for the static protection check for kernel text RO when the to be changed region spawns a full large page which allows to preserve the large mappings. This also prevents the syslog to be spammed about CPA violations when ftrace is used. The exception needs to be removed once ftrace switched over to text_poke() which avoids the whole issue. Fixes: 585948f4f695 ("x86/mm/cpa: Avoid the 4k pages check completely") Reported-by: Song Liu <songliubraving@fb.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Song Liu <songliubraving@fb.com> Reviewed-by: Song Liu <songliubraving@fb.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908282355340.1938@nanos.tec.linutronix.de
2019-08-29i2c: designware: Synchronize IRQs when unregistering slave clientJarkko Nikula
Make sure interrupt handler i2c_dw_irq_handler_slave() has finished before clearing the the dev->slave pointer in i2c_dw_unreg_slave(). There is possibility for a race if i2c_dw_irq_handler_slave() is running on another CPU while clearing the dev->slave pointer. Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-29i2c: i801: Avoid memory leak in check_acpi_smo88xx_device()Andy Shevchenko
check_acpi_smo88xx_device() utilizes acpi_get_object_info() which in its turn allocates a buffer. User is responsible to clean allocated resources. The last has been missed in the original code. Fix it here. While here, replace !ACPI_SUCCESS() with ACPI_FAILURE(). Fixes: 19b07cb4a187 ("i2c: i801: Register optional lis3lv02d I2C device on Dell machines") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-29i2c: make i2c_unregister_device() ERR_PTR safeWolfram Sang
We are moving towards returning ERR_PTRs when i2c_new_*_device() calls fail. Make sure its counterpart for unregistering handles ERR_PTRs as well. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-29Merge tag 'Wimplicit-fallthrough-5.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo A. R. Silva: "Fix fall-through warnings on arc and nds32 for multiple configurations" * tag 'Wimplicit-fallthrough-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: nds32: Mark expected switch fall-throughs ARC: unwind: Mark expected switch fall-through
2019-08-29Merge tag 'mtd/fixes-for-5.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fix from Miquel Raynal: "Add a 'depends on' in the core Hyperbus Kconfig entry to avoid build errors" * tag 'mtd/fixes-for-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: hyperbus: fix dependency and build error
2019-08-29nds32: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: allmodconfig nds32): include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/nds32/kernel/signal.c:362:20: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/nds32/kernel/signal.c:315:7: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-29ARC: unwind: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: haps_hs_defconfig arc): arch/arc/kernel/unwind.c: In function ‘read_pointer’: ./include/linux/compiler.h:328:5: warning: this statement may fall through [-Wimplicit-fallthrough=] do { \ ^ ./include/linux/compiler.h:338:2: note: in expansion of macro ‘__compiletime_assert’ __compiletime_assert(condition, msg, prefix, suffix) ^~~~~~~~~~~~~~~~~~~~ ./include/linux/compiler.h:350:2: note: in expansion of macro ‘_compiletime_assert’ _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) ^~~~~~~~~~~~~~~~~~~ ./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’ #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) ^~~~~~~~~~~~~~~~~~ ./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’ BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) ^~~~~~~~~~~~~~~~ arch/arc/kernel/unwind.c:573:3: note: in expansion of macro ‘BUILD_BUG_ON’ BUILD_BUG_ON(sizeof(u32) != sizeof(value)); ^~~~~~~~~~~~ arch/arc/kernel/unwind.c:575:2: note: here case DW_EH_PE_native: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-29soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TESTGeert Uytterhoeven
The move of the IXP4xx SoC drivers exposed their config options on all platforms. Fix this by wrapping them inside an ARCH_IXP4XX or COMPILE_TEST block. Link: https://lore.kernel.org/r/20190823090352.12243-1-linus.walleij@linaro.org Fixes: fcf2d8978cd538a5 ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-29Merge tag 'sunxi-fixes-for-5.3-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A single patch to change my MAINTAINERS address * tag 'sunxi-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: MAINTAINERS: Update my email address Link: https://lore.kernel.org/r/8c04a96b-4a75-4e1f-b3ac-05fe091f251e.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-29Merge tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi into ↵Arnd Bergmann
arm/fixes Hisilicon fixes for v5.3-rc - Fixed RCU usage in logical PIO - Added a function to unregister a logical PIO range in logical PIO to support the fixes in the hisi-lpc driver - Fixed and optimized hisi-lpc driver to avoid potential use-after-free and driver unbind crash * tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi: bus: hisi_lpc: Add .remove method to avoid driver unbind crash bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free lib: logic_pio: Add logic_pio_unregister_range() lib: logic_pio: Avoid possible overlap for unregistering regions lib: logic_pio: Fix RCU usage Link: https://lore.kernel.org/r/5D562335.7000902@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-29mac80211: Correctly set noencrypt for PAE framesDenis Kenzior
The noencrypt flag was intended to be set if the "frame was received unencrypted" according to include/uapi/linux/nl80211.h. However, the current behavior is opposite of this. Cc: stable@vger.kernel.org Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211") Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-29mac80211: Don't memset RXCB prior to PAE interceptDenis Kenzior
In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if mac80211 is configured to do so and forwards the contents over nl80211. During this process some additional data is also forwarded, including whether the frame was received encrypted or not. Unfortunately just prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is cleared, resulting in incorrect data being exposed over nl80211. Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211") Cc: stable@vger.kernel.org Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190827224120.14545-2-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-29iwlwifi: pcie: handle switching killer Qu B0 NICs to C0Luca Coelho
We need to use a different firmware for C0 versions of killer Qu NICs. Add structures for them and handle them in the if block that detects C0 revisions. Additionally, instead of having an inclusive check for QnJ devices, make the selection exclusive, so that switching to QnJ is the exception, not the default. This prevents us from having to add all the non-QnJ cards to an exclusion list. To do so, only go into the QnJ block if the device has an RF ID type HR and HW revision QnJ. Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-29netfilter: nf_flow_table: clear skb tstamp before xmitFlorian Westphal
If 'fq' qdisc is used and a program has requested timestamps, skb->tstamp needs to be cleared, else fq will treat these as 'transmit time'. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-29mtd: hyperbus: fix dependency and build errorRandy Dunlap
lib/devres.c, which implements devm_ioremap_resource(), is only built when CONFIG_HAS_IOMEM is set/enabled, so MTD_HYPERBUS should depend on HAS_IOMEM. Fixes a build error and a Kconfig warning (as seen on UML builds): WARNING: unmet direct dependencies detected for MTD_COMPLEX_MAPPINGS Depends on [n]: MTD [=m] && HAS_IOMEM [=n] Selected by [m]: - MTD_HYPERBUS [=m] && MTD [=m] ERROR: "devm_ioremap_resource" [drivers/mtd/hyperbus/hyperbus-core.ko] undefined! Fixes: dcc7d3446a0f ("mtd: Add support for HyperBus memory devices") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mtd@lists.infradead.org Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-28Merge branch 'mlxsw-Various-updates'David S. Miller
Ido Schimmel says: ==================== mlxsw: Various updates Patch #1 from Amit removes 56G speed support. The reasons for this are detailed in the commit message. Patch #2 from Shalom ensures that the hardware does not auto negotiate the number of used lanes. For example, if a four lane port supports 100G over both two and four lanes, it will not advertise the two lane link mode. Patch #3 bumps the firmware version supported by the driver. Patch #4 from Petr adds ethtool counters to help debug the internal PTP implementation in mlxsw. I copied Richard on this patch in case he has comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28mlxsw: spectrum_ptp: Add counters for GC eventsPetr Machata
On Spectrum-1, timestamped PTP packets and the corresponding timestamps need to be kept in caches until both are available, at which point they are matched up and packets forwarded as appropriate. However, not all packets will ever see their timestamp, and not all timestamps will ever see their packet. It is necessary to dispose of such abandoned entries, so a garbage collector was introduced in commit 5d23e4159772 ("mlxsw: spectrum: PTP: Garbage-collect unmatched entries"). If these GC events happen often, it is a sign of a problem. However because this whole mechanism is taking place behind the scenes, there is no direct way to determine whether garbage collection took place. Therefore to fix this, on Spectrum-1 only, expose four artificial ethtool counters for the GC events: GCd timestamps and packets, in TX and RX directions. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28mlxsw: Bump firmware version to 13.2000.1886Ido Schimmel
The new version supports extended error reporting from firmware via a new TLV in the EMAD packet. Similar to netlink extended ack. It also fixes an issue in the PCI code that can result in false AER errors under high Tx rate. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28mlxsw: spectrum: Prevent auto negotiation on number of lanesShalom Toledo
After 50G-1-lane and 100G-2-lanes link modes were introduced, the driver is facing situations in which the hardware auto negotiates not only on speed and type, but also on number of lanes. Prevent auto negotiation on number of lanes by allowing only port speeds that can be supported on a given port according to its width. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28mlxsw: Remove 56G speed supportAmit Cohen
Commit 275e928f1911 ("mlxsw: spectrum: Prevent force of 56G") prevented the driver from setting a speed of 56G when auto-negotiation is off. This is the only speed supported by mlxsw that cannot be set when auto-negotiation is off, which makes it difficult to write generic tests. Further, the speed is not supported by newer ASICs such as Spectrum-2 and to the best of our knowledge it is not used by current users. Therefore, remove 56G support from mlxsw. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28net: phy: force phy suspend when calling phy_stopJian Shen
Some ethernet drivers may call phy_start() and phy_stop() from ndo_open() and ndo_close() respectively. When network cable is unconnected, and operate like below: step 1: ifconfig ethX up -> ndo_open -> phy_start ->start autoneg, and phy is no link. step 2: ifconfig ethX down -> ndo_close -> phy_stop -> just stop phy state machine. This patch forces phy suspend even phydev->link is off. Signed-off-by: Jian Shen <shenjian15@huawei.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28sky2: Disable MSI on yet another ASUS boards (P6Xxxx)Takashi Iwai
A similar workaround for the suspend/resume problem is needed for yet another ASUS machines, P6X models. Like the previous fix, the BIOS doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_* entries are used instead. Reported-and-tested-by: SteveM <swm@swm1.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28Merge branch 'nfp-flower-fix-bugs-in-merge-tunnel-encap-code'David S. Miller
Jakub Kicinski says: ==================== nfp: flower: fix bugs in merge tunnel encap code John says: There are few bugs in the merge encap code that have come to light with recent driver changes. Effectively, flow bind callbacks were being registered twice when using internal ports (new 'busy' code triggers this). There was also an issue with neighbour notifier messages being ignored for internal ports. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28nfp: flower: handle neighbour events on internal portsJohn Hurley
Recent code changes to NFP allowed the offload of neighbour entries to FW when the next hop device was an internal port. This allows for offload of tunnel encap when the end-point IP address is applied to such a port. Unfortunately, the neighbour event handler still rejects events that are not associated with a repr dev and so the firmware neighbour table may get out of sync for internal ports. Fix this by allowing internal port neighbour events to be correctly processed. Fixes: 45756dfedab5 ("nfp: flower: allow tunnels to output to internal port") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28nfp: flower: prevent ingress block binds on internal portsJohn Hurley
Internal port TC offload is implemented through user-space applications (such as OvS) by adding filters at egress via TC clsact qdiscs. Indirect block offload support in the NFP driver accepts both ingress qdisc binds and egress binds if the device is an internal port. However, clsact sends bind notification for both ingress and egress block binds which can lead to the driver registering multiple callbacks and receiving multiple notifications of new filters. Fix this by rejecting ingress block bind callbacks when the port is internal and only adding filter callbacks for egress binds. Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28Merge branch 'r8152-fix-side-effect'David S. Miller
Hayes Wang says: ==================== r8152: fix side effect v3: Update the commit message for patch #1. v2: Replace patch #2 with "r8152: remove calling netif_napi_del". v1: The commit 0ee1f4734967 ("r8152: napi hangup fix after disconnect") add a check to avoid using napi_disable after netif_napi_del. However, the commit ffa9fec30ca0 ("r8152: set RTL8152_UNPLUG only for real disconnection") let the check useless. Therefore, I revert commit 0ee1f4734967 ("r8152: napi hangup fix after disconnect") first, and add another patch to fix it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28r8152: remove calling netif_napi_delHayes Wang
Remove unnecessary use of netif_napi_del. This also avoids to call napi_disable() after netif_napi_del(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28Revert "r8152: napi hangup fix after disconnect"Hayes Wang
This reverts commit 0ee1f4734967af8321ecebaf9c74221ace34f2d5. The commit 0ee1f4734967 ("r8152: napi hangup fix after disconnect") adds a check about RTL8152_UNPLUG to determine if calling napi_disable() is invalid in rtl8152_close(), when rtl8152_disconnect() is called. This avoids to use napi_disable() after calling netif_napi_del(). Howver, commit ffa9fec30ca0 ("r8152: set RTL8152_UNPLUG only for real disconnection") causes that RTL8152_UNPLUG is not always set when calling rtl8152_disconnect(). Therefore, I have to revert commit 0ee1f4734967 ("r8152: napi hangup fix after disconnect"), first. And submit another patch to fix it. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28net/sched: pfifo_fast: fix wrong dereference in pfifo_fast_enqueueDavide Caratti
Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of 'TCQ_F_NOLOCK' bit in the parent qdisc, we can't assume anymore that per-cpu counters are there in the error path of skb_array_produce(). Otherwise, the following splat can be seen: Unable to handle kernel paging request at virtual address 0000600dea430008 Mem abort info: ESR = 0x96000005 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 64k pages, 48-bit VAs, pgdp = 000000007b97530e [0000600dea430008] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000005 [#1] SMP [...] pstate: 10000005 (nzcV daif -PAN -UAO) pc : pfifo_fast_enqueue+0x524/0x6e8 lr : pfifo_fast_enqueue+0x46c/0x6e8 sp : ffff800d39376fe0 x29: ffff800d39376fe0 x28: 1ffff001a07d1e40 x27: ffff800d03e8f188 x26: ffff800d03e8f200 x25: 0000000000000062 x24: ffff800d393772f0 x23: 0000000000000000 x22: 0000000000000403 x21: ffff800cca569a00 x20: ffff800d03e8ee00 x19: ffff800cca569a10 x18: 00000000000000bf x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: ffff1001a726edd0 x13: 1fffe4000276a9a4 x12: 0000000000000000 x11: dfff200000000000 x10: ffff800d03e8f1a0 x9 : 0000000000000003 x8 : 0000000000000000 x7 : 00000000f1f1f1f1 x6 : ffff1001a726edea x5 : ffff800cca56a53c x4 : 1ffff001bf9a8003 x3 : 1ffff001bf9a8003 x2 : 1ffff001a07d1dcb x1 : 0000600dea430000 x0 : 0000600dea430008 Process ping (pid: 6067, stack limit = 0x00000000dc0aa557) Call trace: pfifo_fast_enqueue+0x524/0x6e8 htb_enqueue+0x660/0x10e0 [sch_htb] __dev_queue_xmit+0x123c/0x2de0 dev_queue_xmit+0x24/0x30 ip_finish_output2+0xc48/0x1720 ip_finish_output+0x548/0x9d8 ip_output+0x334/0x788 ip_local_out+0x90/0x138 ip_send_skb+0x44/0x1d0 ip_push_pending_frames+0x5c/0x78 raw_sendmsg+0xed8/0x28d0 inet_sendmsg+0xc4/0x5c0 sock_sendmsg+0xac/0x108 __sys_sendto+0x1ac/0x2a0 __arm64_sys_sendto+0xc4/0x138 el0_svc_handler+0x13c/0x298 el0_svc+0x8/0xc Code: f9402e80 d538d081 91002000 8b010000 (885f7c03) Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags', before dereferencing 'qdisc->cpu_qstats'. Fixes: 8a53e616de29 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too") CC: Paolo Abeni <pabeni@redhat.com> CC: Stefano Brivio <sbrivio@redhat.com> Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28tcp: inherit timestamp on mtu probeWillem de Bruijn
TCP associates tx timestamp requests with a byte in the bytestream. If merging skbs in tcp_mtu_probe, migrate the tstamp request. Similar to MSG_EOR, do not allow moving a timestamp from any segment in the probe but the last. This to avoid merging multiple timestamps. Tested with the packetdrill script at https://github.com/wdebruij/packetdrill/commits/mtu_probe-1 Link: http://patchwork.ozlabs.org/patch/1143278/#2232897 Fixes: 4ed2d765dfac ("net-timestamp: TCP timestamping") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28net: sched: act_sample: fix psample group handling on overwriteVlad Buslov
Action sample doesn't properly handle psample_group pointer in overwrite case. Following issues need to be fixed: - In tcf_sample_init() function RCU_INIT_POINTER() is used to set s->psample_group, even though we neither setting the pointer to NULL, nor preventing concurrent readers from accessing the pointer in some way. Use rcu_swap_protected() instead to safely reset the pointer. - Old value of s->psample_group is not released or deallocated in any way, which results resource leak. Use psample_group_put() on non-NULL value obtained with rcu_swap_protected(). - The function psample_group_put() that released reference to struct psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu grace period when deallocating it. Extend struct psample_group with rcu head and use kfree_rcu when freeing it. Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-08-26 This series contains updates to ice driver only. Usha fixes the statistics reported on 4 port NICs which were reporting the incorrect statistics due to using the incorrect port identifier. Victor fixes an issue when trying to traverse to the first node of a requested layer by adding a sibling head pointer for each layer per traffic class. Anirudh cleans up the locking and logic for enabling and disabling VSI's to make it more consistent. Updates the driver to do dynamic allocation of queue management bitmaps and arrays, rather than statically allocating them which consumes more memory than required. Refactor the logic in ice_ena_msix_range() for clarity and add additional checks for when requested resources exceed what is available. Jesse updates the debugging print statements to make it more useful when dealing with link and PHY related issues. Krzysztof adds a local variable to the VSI rebuild path to improve readability. Akeem limits the reporting of MDD events from VFs so that the kernel log is not clogged up with MDD events which are duplicate or potentially false positives. Fixed a reset issue that would result in the system getting into a state that could only be resolved by a reboot by testing if the VF is in a disabled state during a reset. Michal adds a check to avoid trying to access memory that has not be allocated by checking the number of queue pairs. Jake fixes a static analysis warning due to a cast of a u8 to unsigned long, so just update ice_is_tc_ena() to take a unsigned long so that a cast is not necessary. Colin Ian King fixes a potential infinite loop where a u8 is being compared to an int. Maciej refactors the queue handling functions that work on queue arrays so that the logic can be done for a single queue. Paul adds support for VFs to enable and disable single queues. Henry fixed the order of operations in ice_remove() which was trying to use adminq operations that were already disabled. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28ibmvnic: Do not process reset during or after device removalThomas Falcon
Currently, the ibmvnic driver will not schedule device resets if the device is being removed, but does not check the device state before the reset is actually processed. This leads to a race where a reset is scheduled with a valid device state but is processed after the driver has been removed, resulting in an oops. Fix this by checking the device state before processing a queued reset event. Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28ARM: 8901/1: add a criteria for pfn_valid of armzhaoyang
pfn_valid can be wrong when parsing a invalid pfn whose phys address exceeds BITS_PER_LONG as the MSB will be trimed when shifted. The issue originally arise from bellowing call stack, which corresponding to an access of the /proc/kpageflags from userspace with a invalid pfn parameter and leads to kernel panic. [46886.723249] c7 [<c031ff98>] (stable_page_flags) from [<c03203f8>] [46886.723264] c7 [<c0320368>] (kpageflags_read) from [<c0312030>] [46886.723280] c7 [<c0311fb0>] (proc_reg_read) from [<c02a6e6c>] [46886.723290] c7 [<c02a6e24>] (__vfs_read) from [<c02a7018>] [46886.723301] c7 [<c02a6f74>] (vfs_read) from [<c02a778c>] [46886.723315] c7 [<c02a770c>] (SyS_pread64) from [<c0108620>] (ret_fast_syscall+0x0/0x28) Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-28RISC-V: Fix FIXMAP area corruption on RV32 systemsAnup Patel
Currently, various virtual memory areas of Linux RISC-V are organized in increasing order of their virtual addresses is as follows: 1. User space area (This is lowest area and starts at 0x0) 2. FIXMAP area 3. VMALLOC area 4. Kernel area (This is highest area and starts at PAGE_OFFSET) The maximum size of user space aread is represented by TASK_SIZE. On RV32 systems, TASK_SIZE is defined as VMALLOC_START which causes the user space area to overlap the FIXMAP area. This allows user space apps to potentially corrupt the FIXMAP area and kernel OF APIs will crash whenever they access corrupted FDT in the FIXMAP area. On RV64 systems, TASK_SIZE is set to fixed 256GB and no other areas happen to overlap so we don't see any FIXMAP area corruptions. This patch fixes FIXMAP area corruption on RV32 systems by setting TASK_SIZE to FIXADDR_START. We also move FIXADDR_TOP, FIXADDR_SIZE, and FIXADDR_START defines to asm/pgtable.h so that we can avoid cyclic header includes. Signed-off-by: Anup Patel <anup.patel@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-28openvswitch: Clear the L4 portion of the key for "later" fragments.Justin Pettit
Only the first fragment in a datagram contains the L4 headers. When the Open vSwitch module parses a packet, it always sets the IP protocol field in the key, but can only set the L4 fields on the first fragment. The original behavior would not clear the L4 portion of the key, so garbage values would be sent in the key for "later" fragments. This patch clears the L4 fields in that circumstance to prevent sending those garbage values as part of the upcall. Signed-off-by: Justin Pettit <jpettit@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28openvswitch: Properly set L4 keys on "later" IP fragmentsGreg Rose
When IP fragments are reassembled before being sent to conntrack, the key from the last fragment is used. Unless there are reordering issues, the last fragment received will not contain the L4 ports, so the key for the reassembled datagram won't contain them. This patch updates the key once we have a reassembled datagram. The handle_fragments() function works on L3 headers so we pull the L3/L4 flow key update code from key_extract into a new function 'key_extract_l3l4'. Then we add a another new function ovs_flow_key_update_l3l4() and export it so that it is accessible by handle_fragments() for conntrack packet reassembly. Co-authored-by: Justin Pettit <jpettit@ovn.org> Signed-off-by: Greg Rose <gvrose8192@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:56:18 +0000