summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-16net/mlx5: E-Switch, Allow setting GUID for host PF vportParav Pandit
E-switch should be able to set the GUID of host PF vport. Currently it returns an error. This results in below error when user attempts to configure MAC address of the PF of an external controller. $ devlink port function set pci/0000:03:00.0/196608 \ hw_addr 00:00:00:11:22:33 mlx5_core 0000:03:00.0: mlx5_esw_set_vport_mac_locked:1876:(pid 6715):\ "Failed to set vport 0 node guid, err = -22. RDMA_CM will not function properly for this VF." Check for zero vport is no longer needed. Fixes: 330077d14de1 ("net/mlx5: E-switch, Supporting setting devlink port function mac address") Signed-off-by: Yuval Avnery <yuvalav@nvidia.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5: E-Switch, Read PF mac addressParav Pandit
External controller PF's MAC address is not read from the device during vport setup. Fail to read this results in showing all zeros to user while the factory programmed MAC is a valid value. $ devlink port show eth1 -jp { "port": { "pci/0000:03:00.0/196608": { "type": "eth", "netdev": "eth1", "flavour": "pcipf", "controller": 1, "pfnum": 0, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Hence, read it when enabling a vport. After the fix, $ devlink port show eth1 -jp { "port": { "pci/0000:03:00.0/196608": { "type": "eth", "netdev": "eth1", "flavour": "pcipf", "controller": 1, "pfnum": 0, "splittable": false, "function": { "hw_addr": "98:03:9b:a0:60:11" } } } } Fixes: f099fde16db3 ("net/mlx5: E-switch, Support querying port function mac address") Signed-off-by: Bodong Wang <bodong@nvidia.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5: Check that driver was probed prior attaching the deviceLeon Romanovsky
The device can be requested to be attached despite being not probed. This situation is possible if devlink reload races with module removal, and the following kernel panic is an outcome of such race. mlx5_core 0000:00:09.0: firmware version: 4.7.9999 mlx5_core 0000:00:09.0: 0.000 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x255 link) BUG: unable to handle page fault for address: fffffffffffffff0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 3218067 P4D 3218067 PUD 321a067 PMD 0 Oops: 0000 [#1] SMP KASAN NOPTI CPU: 7 PID: 250 Comm: devlink Not tainted 5.12.0-rc2+ #2836 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_attach_device+0x80/0x280 [mlx5_core] Code: f8 48 c1 e8 03 42 80 3c 38 00 0f 85 80 01 00 00 48 8b 45 68 48 8d 78 f0 48 89 fe 48 c1 ee 03 42 80 3c 3e 00 0f 85 70 01 00 00 <48> 8b 40 f0 48 85 c0 74 0d 48 89 ef ff d0 85 c0 0f 85 84 05 0e 00 RSP: 0018:ffff8880129675f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff827407f1 RDX: 1ffff110011336cf RSI: 1ffffffffffffffe RDI: fffffffffffffff0 RBP: ffff888008e0c000 R08: 0000000000000008 R09: ffffffffa0662ee7 R10: fffffbfff40cc5dc R11: 0000000000000000 R12: ffff88800ea002e0 R13: ffffed1001d459f7 R14: ffffffffa05ef4f8 R15: dffffc0000000000 FS: 00007f51dfeaf740(0000) GS:ffff88806d5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffff0 CR3: 000000000bc82006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_load_one+0x117/0x1d0 [mlx5_core] devlink_reload+0x2d5/0x520 ? devlink_remote_reload_actions_performed+0x30/0x30 ? mutex_trylock+0x24b/0x2d0 ? devlink_nl_cmd_reload+0x62b/0x1070 devlink_nl_cmd_reload+0x66d/0x1070 ? devlink_reload+0x520/0x520 ? devlink_nl_pre_doit+0x64/0x4d0 genl_family_rcv_msg_doit+0x1e9/0x2f0 ? mutex_lock_io_nested+0x1130/0x1130 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? security_capable+0x51/0x90 genl_rcv_msg+0x27f/0x4a0 ? genl_get_cmd+0x3c0/0x3c0 ? lock_acquire+0x1a9/0x6d0 ? devlink_reload+0x520/0x520 ? lock_release+0x6c0/0x6c0 netlink_rcv_skb+0x11d/0x340 ? genl_get_cmd+0x3c0/0x3c0 ? netlink_ack+0x9f0/0x9f0 ? lock_release+0x1f9/0x6c0 genl_rcv+0x24/0x40 netlink_unicast+0x433/0x700 ? netlink_attachskb+0x730/0x730 ? _copy_from_iter_full+0x178/0x650 ? __alloc_skb+0x113/0x2b0 netlink_sendmsg+0x6f1/0xbd0 ? netlink_unicast+0x700/0x700 ? netlink_unicast+0x700/0x700 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x193/0x240 ? __x64_sys_getpeername+0xb0/0xb0 ? copy_page_range+0x2300/0x2300 ? __up_read+0x1a1/0x7b0 ? do_user_addr_fault+0x219/0xdc0 __x64_sys_sendto+0xdd/0x1b0 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f51dffb514a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c RSP: 002b:00007ffcaef22e78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f51dffb514a RDX: 0000000000000030 RSI: 000055750daf2440 RDI: 0000000000000003 RBP: 000055750daf2410 R08: 00007f51e0081200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: mlx5_core(-) ptp pps_core ib_ipoib rdma_ucm rdma_cm iw_cm ib_cm ib_umad ib_uverbs ib_core [last unloaded: mlx5_ib] CR2: fffffffffffffff0 ---[ end trace 7789831bfe74fa42 ]--- Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16net/mlx5: Fix error path for set HCA defaultsLeon Romanovsky
In the case of the failure to execute mlx5_core_set_hca_defaults(), we used wrong goto label to execute error unwind flow. Fixes: 5bef709d76a2 ("net/mlx5: Enable host PF HCA after eswitch is initialized") Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-16drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell.Yifan Zhang
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-06-16drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.Yifan Zhang
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-06-16r8169: Avoid memcpy() over-reading of ETH_SS_STATSKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16sh_eth: Avoid memcpy() over-reading of ETH_SS_STATSKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16r8152: Avoid memcpy() over-reading of ETH_SS_STATSKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16Merge tag 'wireless-drivers-next-2021-06-16' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.14 First set of patches for v5.14. Major new features are here support WCN6855 PCI in ath11k and WoWLAN support for wcn36xx. Also smaller fixes and cleanups all over. ath9k * provide STBC info in the received frames brcmfmac * fix setting of station info chains bitmask * correctly report average RSSI in station info rsi * support for changing beacon interval in AP mode ath11k * support for WCN6855 PCI hardware wcn36xx * WoWLAN support with magic packets and GTK rekeying ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16Merge branch 'marvell-prestera-flower-match-all'David S. Miller
Vadym Kochan says: ==================== Marvell Prestera add flower and match all support Add ACL infrastructure for Prestera Switch ASICs family devices to offload cls_flower rules to be processed in the HW. ACL implementation is based on tc filter api. The flower classifier is supported to configure ACL rules/matches/action. Supported actions: - drop - trap - pass Supported dissector keys: - indev - src_mac - dst_mac - src_ip - dst_ip - ip_proto - src_port - dst_port - vlan_id - vlan_ethtype - icmp type/code - Introduce matchall filter support - Add SPAN API to configure port mirroring. - Add tc mirror action. At this moment, only mirror (egress) action is supported. Example: tc filter ... action mirred egress mirror dev DEV v2: Fixed "newline at EOF warnings" from "git am" by re-applying with --whitespace=fix patch #1: 1) Set TC HW Offload always enabled without disable it [suggested by Vladimir Oltean] by user. It reduced the logic by removing feature handling and acl block disable counting. patch #2: 1) Removed extra not needed diff with prestera_port and [suggested by Vladimir Oltean] prestera_switch lines exchanging in prestera_acl.h 2) Fix local variables ordering to reverse chrostmas tree [suggested by Vladimir Oltean] 3) Use tc_cls_can_offload_and_chain0() in [suggested by Vladimir Oltean] prestera_span_replace() 4) Removed TODO about prio check [suggested by Vladimir Oltean] 5) Rephrase error message if prestera_netdev_check() [suggested by Vladimir Oltean] fails in prestera_span_replace() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: marvell: prestera: Add matchall supportSerhiy Boiko
- Introduce matchall filter support - Add SPAN API to configure port mirroring. - Add tc mirror action. At this moment, only mirror (egress) action is supported. Example: tc filter ... action mirred egress mirror dev DEV Co-developed-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: marvell: Implement TC flower offloadSerhiy Boiko
Add ACL infrastructure for Prestera Switch ASICs family devices to offload cls_flower rules to be processed in the HW. ACL implementation is based on tc filter api. The flower classifier is supported to configure ACL rules/matches/action. Supported actions: - drop - trap - pass Supported dissector keys: - indev - src_mac - dst_mac - src_ip - dst_ip - ip_proto - src_port - dst_port - vlan_id - vlan_ethtype - icmp type/code Co-developed-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16selftests: net: use bash to run udpgro_fwd test caseAndrea Righi
udpgro_fwd.sh contains many bash specific operators ("[[", "local -r"), but it's using /bin/sh; in some distro /bin/sh is mapped to /bin/dash, that doesn't support such operators. Force the test to use /bin/bash explicitly and prevent false positive test failures. Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16Merge branch 'net-smc-stats'David S. Miller
Karsten Graul says: ==================== net/smc: Add SMC statistic support Please apply the following patch series for smc to netdev's net-next tree. This v2 is a resend of the code contained in v1 but with an updated cover letter to describe why we have chosen to use the generic netlink mechanism to access the smc protocol's statistic data. The patchset adds statistic support to the SMC protocol. Per-cpu variables are used to collect the statistic information for better performance and for reducing concurrency pitfalls. The code that is collecting statistic data is implemented in macros to increase code reuse and readability. The generic netlink mechanism in SMC is extended to provide the collected statistics to userspace. Network namespace awareness is also part of the statistics implementation. SMC is a protocol interacting with PCI devices (like RoCE Cards) and runs on top of the TCP protocol. As SMC is a network protocol and not an ethernet device driver, we decided to use the generic netlink interface. This should be comparable to what other protocols in the net subsystem like tipc, ncsi, ieee802154 or tcp, et al, do. There is already an established internal generic netlink interface mechanism in SMC which is used to collect SMC Protocol internal information. This patchset extends that existing mechanism. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net/smc: Make SMC statistics network namespace awareGuvenc Gulce
Make the gathered SMC statistics network namespace aware, for each namespace collect an own set of statistic information. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net/smc: Add netlink support for SMC fallback statisticsGuvenc Gulce
Add support to collect more detailed SMC fallback reason statistics and provide these statistics to user space on the netlink interface. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net/smc: Add netlink support for SMC statisticsGuvenc Gulce
Add the netlink function which collects the statistics information and delivers it to the userspace. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net/smc: Add SMC statistics supportGuvenc Gulce
Add the ability to collect SMC statistics information. Per-cpu variables are used to collect the statistic information for better performance and for reducing concurrency pitfalls. The code that is collecting statistic data is implemented in macros to increase code reuse and readability. Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net/af_unix: fix a data-race in unix_dgram_sendmsg / unix_release_sockEric Dumazet
While unix_may_send(sk, osk) is called while osk is locked, it appears unix_release_sock() can overwrite unix_peer() after this lock has been released, making KCSAN unhappy. Changing unix_release_sock() to access/change unix_peer() before lock is released should fix this issue. BUG: KCSAN: data-race in unix_dgram_sendmsg / unix_release_sock write to 0xffff88810465a338 of 8 bytes by task 20852 on cpu 1: unix_release_sock+0x4ed/0x6e0 net/unix/af_unix.c:558 unix_release+0x2f/0x50 net/unix/af_unix.c:859 __sock_release net/socket.c:599 [inline] sock_close+0x6c/0x150 net/socket.c:1258 __fput+0x25b/0x4e0 fs/file_table.c:280 ____fput+0x11/0x20 fs/file_table.c:313 task_work_run+0xae/0x130 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x156/0x190 kernel/entry/common.c:209 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:302 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88810465a338 of 8 bytes by task 20888 on cpu 0: unix_may_send net/unix/af_unix.c:189 [inline] unix_dgram_sendmsg+0x923/0x1610 net/unix/af_unix.c:1712 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff888167905400 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 20888 Comm: syz-executor.0 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16selftests: net: veth: make test compatible with dashAndrea Righi
veth.sh is a shell script that uses /bin/sh; some distro (Ubuntu for example) use dash as /bin/sh and in this case the test reports the following error: # ./veth.sh: 21: local: -r: bad variable name # ./veth.sh: 21: local: -r: bad variable name This happens because dash doesn't support the option "-r" with local. Moreover, in case of missing bpf object, the script is exiting -1, that is an illegal number for dash: exit: Illegal number: -1 Change the script to be compatible both with bash and dash and prevent the errors above. Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16Merge branch 'net-packet-data-races'David S. Miller
Eric Dumazet says: ==================== net/packet: annotate data races KCSAN sent two reports about data races in af_packet. Nothing serious, but worth fixing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net/packet: annotate accesses to po->ifindexEric Dumazet
Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net/packet: annotate accesses to po->bindEric Dumazet
tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show() can read po->num without holding a lock. This means other threads can change po->num at the same time. KCSAN complained about this known fact [1] Add READ_ONCE()/WRITE_ONCE() to address the issue. [1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0: packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1: packet_snd net/packet/af_packet.c:2899 [inline] packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2433 __do_sys_sendmsg net/socket.c:2442 [inline] __se_sys_sendmsg net/socket.c:2440 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x1200 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16mlxsw: spectrum_router: remove redundant continue statementColin Ian King
The continue statement at the end of a for-loop has no effect, remove it. Addresses-Coverity: ("Continue has no effect") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16Merge tag 'linux-can-fixes-for-5.13-20210616' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-06-16 this is a pull request of 4 patches for net/master. The first patch is by Oleksij Rempel and fixes a Use-after-Free found by syzbot in the j1939 stack. The next patch is by Tetsuo Handa and fixes hung task detected by syzbot in the bcm, raw and isotp protocols. Norbert Slusarek's patch fixes a infoleak in bcm's struct bcm_msg_head. Pavel Skripkin's patch fixes a memory leak in the mcba_usb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16Merge branch 'nfp-ct-part-two'David S. Miller
Simon Horman says: ==================== Next set of conntrack patches for the nfp driver Louis Peens says: This follows on from the previous series of a similar nature. Looking at the diagram as explained in the previous series this implements changes up to the point where the merged nft entries are saved. There are still bits of stubbed out code where offloading of the flows will be implemented. +-------------+ +----------+ | pre_ct flow +--------+ | nft flow | +-------------+ v +------+---+ +----------+ | | tc_merge +--------+ | +----------+ v v +--------------+ ^ +-------------+ | post_ct flow +-------+ +---+nft_tc merge | +--------------+ | +-------------+ | | | v Offload to nfp ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16nfp: flower-ct: implement action_merge checkLouis Peens
Fill in code stub to check that the flow actions are valid for merge. The actions of the flow X should not conflict with the matches of flow X+1. For now this check is quite strict and set_actions are very limited, will need to update this when NAT support is added. Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16nfp: flower-ct: fill ct metadata check functionLouis Peens
Fill in check_meta stub to check that ct_metadata action fields in the nft flow matches the ct_match data of the post_ct flow. Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16nfp: flower-ct: fill in ct merge check functionLouis Peens
Replace merge check stub code with the actual implementation. This checks that the match parts of two tc flows does not conflict. Only overlapping keys needs to be checked, and only the narrowest masked parts needs to be checked, so each key is masked with the AND'd result of both masks before comparing. Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16nfp: flower-ct: implement code to save merge of tc and nft flowsLouis Peens
Add in the code to merge the tc_merge objects with the flows received from nft. At the moment flows are just merged blindly as the validity check functions are stubbed out, this will be populated in follow-up patches. Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16nfp: flower-ct: add nft_merge tableLouis Peens
Add table and struct to save the result of the three-way merge between pre_ct,post_ct, and nft flows. Merging code is to be added in follow-up patches. Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16nfp: flower-ct: make a full copy of the rule when it is a NFT flowYinjun Zhang
The nft flow will be destroyed after offload cb returns. This means we need save a full copy of it since it can be referenced through other paths other than just the offload cb, for example when a new pre_ct or post_ct entry is added, and it needs to be merged with an existing nft entry. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16nfp: flower-ct: add nft flows to nft listLouis Peens
Implement code to add and remove nft flows to the relevant list. Registering and deregistering the callback function for the nft table is quite complicated. The safest is to delete the callback on the removal of the last pre_ct flow. This is because if this is also the latest pre_ct flow in software it means that this specific nft table will be freed, so there will not be a later opportunity to do this. Another place where it looks possible to delete the callback is when the last nft_flow is deleted, but this happens under the flow_table lock, which is also taken when deregistering the callback, leading to a deadlock situation. This means the final solution here is to delete the callback when removing the last pre_ct flow, and then clean up any remaining nft_flow entries which may still be present, since there will never be a callback now to do this, leaving them orphaned if not cleaned up here as well. Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16nfp: flower-ct: add nft callback stubsLouis Peens
Add register/unregister of the nft callback. For now just add stub code to accept the flows, but don't do anything with it. Decided to accept the flows since netfilter will keep on trying to offload a flow if it was rejected, which is quite noisy. Follow-up patches will start implementing the functions to add nft flows to the relevant tables. Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16nfp: flower-ct: add delete flow handling for ctLouis Peens
Add functions to handle delete flow callbacks for ct flows. Also accept the flows for offloading by returning 0 instead of -EOPNOTSUPP. Flows will still not actually be offloaded to hw, but at this point it's difficult to not accept the flows and also exercise the cleanup paths properly. Traffic will still be handled safely through the fallback path. Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: ipv4: fix memory leak in ip_mc_add1_srcChengyang Fan
BUG: memory leak unreferenced object 0xffff888101bc4c00 (size 32): comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................ backtrace: [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline] [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline] [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline] [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095 [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416 [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline] [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423 [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857 [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117 [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline] [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline] [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125 [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47 [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In commit 24803f38a5c0 ("igmp: do not remove igmp souce list info when set link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed, because it was also called in igmpv3_clear_delrec(). Rough callgraph: inetdev_destroy -> ip_mc_destroy_dev -> igmpv3_clear_delrec -> ip_mc_clear_src -> RCU_INIT_POINTER(dev->ip_ptr, NULL) However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through inetdev_by_index() and then in_dev->mc_list->sources cannot be released by ip_mc_del1_src() in the sock_close. Rough call sequence goes like: sock_close -> __sock_release -> inet_release -> ip_mc_drop_socket -> inetdev_by_index -> ip_mc_leave_src -> ip_mc_del_src -> ip_mc_del1_src So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free in_dev->mc_list->sources. Fixes: 24803f38a5c0 ("igmp: do not remove igmp souce list info ...") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chengyang Fan <cy.fan@huawei.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16Merge branch 'fec-ptp-fixes'David S. Miller
Joakim Zhang says: ==================== net: fixes for fec ptp Small fixes for fec ptp. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: fec_ptp: fix issue caused by refactor the fec_devtypeJoakim Zhang
Commit da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.") refactor the fec_devtype, need adjust ptp driver accordingly. Fixes: da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: fec_ptp: add clock rate zero checkFugang Duan
Add clock rate zero check to fix coverity issue of "divide by 0". Fixes: commit 85bd1798b24a ("net: fec: fix spin_lock dead lock") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: usb: fix possible use-after-free in smsc75xx_bindDongliang Mu
The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind") fails to clean up the work scheduled in smsc75xx_reset-> smsc75xx_set_multicast, which leads to use-after-free if the work is scheduled to start after the deallocation. In addition, this patch also removes a dangling pointer - dev->data[0]. This patch calls cancel_work_sync to cancel the scheduled work and set the dangling pointer to NULL. Fixes: 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16Merge branch 'net-phy-cleanups'David S. Miller
Weihang Li says: ==================== net: phy: fix some coding-style issues Make some cleanups according to the coding style of kernel. Changes since v1: - Update commit description of #1 and #3. - Avoid changing the indentation in #2. - Change a group of if-else statement into switch from #4 and put it into a single patch. - Put '|' at the end of line in #5 and #7. - Avoid deleting spaces in definition of 'settings' in #5. - Drop #8 from the series which needs more discussion with David. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: replace if-else statements with switchWeihang Li
Switch statement is clearer than a group of 'if-else'. Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: remove unnecessary line continuationWenpeng Liang
Avoid unnecessary line continuations, and put '|' at the end of line. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: print the function name by __func__ instead of an fixed stringWenpeng Liang
It's better to use __func__ than a fixed string to print a function's name. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: fix formatting issues with bracesWenpeng Liang
Fix following format issues: 1. open brace '{' following function definitions should go to the next line. 2. braces {} are not necessary for single line statements. 3. else should follow close brace '}'. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: fix space alignment issuesWenpeng Liang
There are some space related issues, including spaces at the start of the line, before tabs, after open parenthesis and before close parenthesis. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: delete repeated words of commentsWenpeng Liang
There are some repeated words in some comments, they should be deleted. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: correct format of block commentsWenpeng Liang
Block comments should not use a trailing */ on a separate line and every line of a block comment should start with an '*'. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: phy: change format of some declarationsWenpeng Liang
Add a blank line after declarations, change the order of them and put the assignments and declarations together. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 11:52:56 +0000